From: "Nilawar, Badal" <badal.nilawar@intel.com>
To: Nareshkumar Gollakoti <naresh.kumar.g@intel.com>,
<intel-xe@lists.freedesktop.org>
Cc: <sk.anirban@intel.com>,
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Subject: Re: [PATCH v3 3/3] drm/xe: Expose CRI maximum memory frequency and bandwidth in sysfs
Date: Thu, 19 Nov 2026 17:12:12 +0530 [thread overview]
Message-ID: <f9e68483-67ad-4b95-9e6d-665ff0cdcaaa@intel.com> (raw)
In-Reply-To: <20261118172458.316603-4-naresh.kumar.g@intel.com>
On 18-11-2026 22:54, Nareshkumar Gollakoti wrote:
> From: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
>
> Expose the maximum achievable memory frequency and bandwidth reported
> by PCODE MEMORY_CONFIG as read-only tile#/memory/max_freq (MHz) and
> tile#/memory/max_bw on Crescent Island.
>
> These are capability limits, not the current memory frequency or
> bandwidth usage. The existing PVC memory/freq0 entries are unchanged.
>
> Document both attributes in the Xe sysfs ABI.
>
> v2:(Sashiko)
> 1. Fixed CFI violation by updating attribute types and callback signatures
> 2. Added a check for xe->info.skip_pcode in memory_groups() to prevent
> exposing these attributes on Virtual Functions,
> where PCODE access is disabled.
> 3. Changed kernel version in documentation from 7.4 to 7.5(Badal)
>
> v3:
> 1. The device_uid version was reverted to the previous value
There is no effective change to device_uid, please drop this change log
entry while merging.
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Thanks,
Badal
>
> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
> Signed-off-by: Nareshkumar Gollakoti <naresh.kumar.g@intel.com>
> ---
> .../ABI/testing/sysfs-driver-intel-xe-gpu | 24 ++++
> drivers/gpu/drm/xe/xe_vram_config.c | 122 ++++++++++++++++--
> 2 files changed, 132 insertions(+), 14 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-gpu b/Documentation/ABI/testing/sysfs-driver-intel-xe-gpu
> index 4dc4afc3961d9..b563b7e8a9d9c 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-xe-gpu
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-gpu
> @@ -8,3 +8,27 @@ Description:
>
> This sysfs file is present only on supported Intel Xe platforms.
> Accessible only to users with administrative privileges.
> +
> +What: /sys/bus/pci/drivers/xe/.../tile<N>/memory/max_bw
> +Date: October 2026
> +KernelVersion: 7.5
> +Contact: intel-xe@lists.freedesktop.org
> +Description:
> + RO. Maximum achievable memory bandwidth reported by firmware, in
> + megabits per second (Mbps), as a decimal integer.
> + This is not a measurement of current memory bandwidth usage.
> +
> + This sysfs file is present only on Crescent Island devices.
> + It is readable by all users.
> +
> +What: /sys/bus/pci/drivers/xe/.../tile<N>/memory/max_freq
> +Date: October 2026
> +KernelVersion: 7.5
> +Contact: intel-xe@lists.freedesktop.org
> +Description:
> + RO. Maximum achievable memory frequency reported by firmware,
> + in MHz, as a decimal integer.
> + This is not the current memory frequency.
> +
> + This sysfs file is present only on Crescent Island devices.
> + It is readable by all users.
> diff --git a/drivers/gpu/drm/xe/xe_vram_config.c b/drivers/gpu/drm/xe/xe_vram_config.c
> index 31a3405c39abd..130a8f76e6663 100644
> --- a/drivers/gpu/drm/xe/xe_vram_config.c
> +++ b/drivers/gpu/drm/xe/xe_vram_config.c
> @@ -8,13 +8,14 @@
> #include "xe_device_types.h"
> #include "xe_pcode.h"
> #include "xe_pcode_api.h"
> +#include "xe_pm.h"
> #include "xe_tile_sysfs.h"
> #include "xe_vram_config.h"
>
> /**
> * DOC: Xe VRAM config
> *
> - * Provides sysfs entries for vram frequency in tile
> + * Provides sysfs entries for vram frequency and bandwidth in tile
> *
> * device/tile#/memory/freq0/max_freq - This is maximum frequency. This value is read-only as it
> * is the fixed fuse point P0. It is not the system
> @@ -22,17 +23,22 @@
> * device/tile#/memory/freq0/min_freq - This is minimum frequency. This value is read-only as it
> * is the fixed fuse point PN. It is not the system
> * configuration.
> + *
> + * On Crescent Island, the following entries are provided instead:
> + *
> + * device/tile#/memory/max_freq - Maximum achievable memory frequency in MHz. Read-only.
> + * device/tile#/memory/max_bw - Maximum achievable memory bandwidth in Mbps. Read-only.
> */
>
> -static struct xe_tile *dev_to_tile(struct device *dev)
> +static struct xe_tile *kobj_to_tile_parent(struct kobject *kobj)
> {
> - return kobj_to_tile(dev->kobj.parent);
> + return kobj_to_tile(kobj->parent);
> }
>
> -static ssize_t max_freq_show(struct device *dev, struct device_attribute *attr,
> +static ssize_t max_freq_show(struct kobject *kobj, struct kobj_attribute *attr,
> char *buf)
> {
> - struct xe_tile *tile = dev_to_tile(dev);
> + struct xe_tile *tile = kobj_to_tile_parent(kobj);
> u32 val = 0, mbox;
> int err;
>
> @@ -49,12 +55,16 @@ static ssize_t max_freq_show(struct device *dev, struct device_attribute *attr,
>
> return sysfs_emit(buf, "%u\n", val);
> }
> -static DEVICE_ATTR_RO(max_freq);
>
> -static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr,
> +static struct kobj_attribute kobj_attr_max_freq = {
> + .attr = { .name = "max_freq", .mode = 0444 },
> + .show = max_freq_show,
> +};
> +
> +static ssize_t min_freq_show(struct kobject *kobj, struct kobj_attribute *attr,
> char *buf)
> {
> - struct xe_tile *tile = dev_to_tile(dev);
> + struct xe_tile *tile = kobj_to_tile_parent(kobj);
> u32 val = 0, mbox;
> int err;
>
> @@ -71,11 +81,15 @@ static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr,
>
> return sysfs_emit(buf, "%u\n", val);
> }
> -static DEVICE_ATTR_RO(min_freq);
> +
> +static struct kobj_attribute kobj_attr_min_freq = {
> + .attr = { .name = "min_freq", .mode = 0444 },
> + .show = min_freq_show,
> +};
>
> static struct attribute *freq_attrs[] = {
> - &dev_attr_max_freq.attr,
> - &dev_attr_min_freq.attr,
> + &kobj_attr_max_freq.attr,
> + &kobj_attr_min_freq.attr,
> NULL
> };
>
> @@ -84,11 +98,90 @@ static const struct attribute_group freq_group_attrs = {
> .attrs = freq_attrs,
> };
>
> +static const struct attribute_group *pvc_memory_groups[] = {
> + &freq_group_attrs,
> + NULL
> +};
> +
> +static int memory_config_read(struct kobject *kobj, u32 subcmd, u32 *val)
> +{
> + struct xe_tile *tile = kobj_to_tile_parent(kobj);
> +
> + guard(xe_pm_runtime)(tile_to_xe(tile));
> +
> + return xe_pcode_read(tile, PCODE_MBOX(PCODE_MEMORY_CONFIG, subcmd, 0),
> + val, NULL);
> +}
> +
> +static ssize_t cri_max_freq_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + u32 val = 0;
> + int err;
> +
> + err = memory_config_read(kobj, MEMORY_CONFIG_SUBCOMMAND_READ_MAX_FREQUENCY, &val);
> + if (err)
> + return err;
> +
> + return sysfs_emit(buf, "%u\n", val);
> +}
> +
> +static struct kobj_attribute kobj_attr_cri_max_freq = {
> + .attr = { .name = "max_freq", .mode = 0444 },
> + .show = cri_max_freq_show,
> +};
> +
> +static ssize_t max_bw_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + u32 val = 0;
> + int err;
> +
> + err = memory_config_read(kobj, MEMORY_CONFIG_SUBCOMMAND_READ_MAX_BANDWIDTH, &val);
> + if (err)
> + return err;
> +
> + return sysfs_emit(buf, "%u\n", val);
> +}
> +
> +static struct kobj_attribute kobj_attr_max_bw = {
> + .attr = { .name = "max_bw", .mode = 0444 },
> + .show = max_bw_show,
> +};
> +
> +static struct attribute *cri_memory_attrs[] = {
> + &kobj_attr_cri_max_freq.attr,
> + &kobj_attr_max_bw.attr,
> + NULL
> +};
> +
> +static const struct attribute_group cri_memory_group_attrs = {
> + .attrs = cri_memory_attrs,
> +};
> +
> +static const struct attribute_group *cri_memory_groups[] = {
> + &cri_memory_group_attrs,
> + NULL
> +};
> +
> +static const struct attribute_group **memory_groups(struct xe_device *xe)
> +{
> + if (xe->info.skip_pcode)
> + return NULL;
> +
> + if (xe->info.platform == XE_PVC)
> + return pvc_memory_groups;
> + if (xe->info.platform == XE_CRESCENTISLAND)
> + return cri_memory_groups;
> + return NULL;
> +}
> +
> static void vram_freq_sysfs_fini(void *arg)
> {
> struct kobject *kobj = arg;
> + struct xe_tile *tile = kobj_to_tile(kobj->parent);
>
> - sysfs_remove_group(kobj, &freq_group_attrs);
> + sysfs_remove_groups(kobj, memory_groups(tile_to_xe(tile)));
> kobject_put(kobj);
> }
>
> @@ -103,17 +196,18 @@ static void vram_freq_sysfs_fini(void *arg)
> int xe_vram_config_sysfs_init(struct xe_tile *tile)
> {
> struct xe_device *xe = tile_to_xe(tile);
> + const struct attribute_group **groups = memory_groups(xe);
> struct kobject *kobj;
> int err;
>
> - if (xe->info.platform != XE_PVC)
> + if (!groups)
> return 0;
>
> kobj = kobject_create_and_add("memory", tile->sysfs);
> if (!kobj)
> return -ENOMEM;
>
> - err = sysfs_create_group(kobj, &freq_group_attrs);
> + err = sysfs_create_groups(kobj, groups);
> if (err) {
> kobject_put(kobj);
> return err;
next prev parent reply other threads:[~2026-11-19 11:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 17:24 [PATCH v3 0/3] drm/xe: Expose CRI memory capability limits via sysfs Nareshkumar Gollakoti
2026-11-18 17:24 ` [PATCH v3 1/3] drm/xe/pcode: Add MEMORY_CONFIG mailbox definitions Nareshkumar Gollakoti
2026-11-18 17:24 ` [PATCH v3 2/3] drm/xe: Rename xe_vram_freq to xe_vram_config Nareshkumar Gollakoti
2026-11-18 17:24 ` [PATCH v3 3/3] drm/xe: Expose CRI maximum memory frequency and bandwidth in sysfs Nareshkumar Gollakoti
2026-11-18 19:46 ` Summers, Stuart
2026-11-19 8:43 ` Kumar G, Naresh
2026-11-19 11:42 ` Nilawar, Badal [this message]
2026-11-18 23:19 ` ✗ CI.checkpatch: warning for drm/xe: Expose CRI memory capability limits via sysfs (rev4) Patchwork
2026-11-18 23:22 ` ✓ CI.KUnit: success " Patchwork
2026-11-18 23:59 ` ✓ Xe.CI.BAT: " Patchwork
2026-11-19 20:09 ` ✗ Xe.CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f9e68483-67ad-4b95-9e6d-665ff0cdcaaa@intel.com \
--to=badal.nilawar@intel.com \
--cc=himal.prasad.ghimiray@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=naresh.kumar.g@intel.com \
--cc=sk.anirban@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox