From: sashiko-bot@kernel.org
To: "Daniele Ceraolo Spurio" <daniele.ceraolospurio@intel.com>,
intel-xe@lists.freedesktop.org
Subject: Re: [PATCH v5 2/2] drm/xe/wopcm: Simplify GuC WOPCM programming
Date: Thu, 19 Nov 2026 23:15:01 +0000 [thread overview]
Message-ID: <sashiko-outbox-224176@kernel.org> (raw)
In-Reply-To: <20261119230423.322057-4-daniele.ceraolospurio@intel.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] drm/xe: u32 underflow of guc_wopcm_size in uc_program_wopcm()
--
commit 2876ad005940248a7d3945230ac1cf31aa3198e3
Author: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
drm/xe/wopcm: Simplify GuC WOPCM programming
This commit removes the separate WOPCM module and layout checks, moving
GuC WOPCM register programming into xe_uc.c.
> diff --git a/drivers/gpu/drm/xe/xe_uc.c b/drivers/gpu/drm/xe/xe_uc.c
> index b32ba504041c5..ff13f6e6ccb66 100644
> --- a/drivers/gpu/drm/xe/xe_uc.c
> +++ b/drivers/gpu/drm/xe/xe_uc.c
[ ... ]
> @@ -52,6 +55,126 @@ int xe_uc_init_noalloc(struct xe_uc *uc)
> return ret;
> }
>
> +static bool __wopcm_regs_locked(struct xe_gt *gt,
> + u32 *guc_wopcm_base, u32 *guc_wopcm_size)
> +{
> + u32 reg_base = xe_mmio_read32(>->mmio, DMA_GUC_WOPCM_OFFSET);
> + u32 reg_size = xe_mmio_read32(>->mmio, GUC_WOPCM_SIZE);
> +
> + if (!(reg_size & GUC_WOPCM_SIZE_LOCKED) ||
> + !(reg_base & GUC_WOPCM_OFFSET_VALID))
> + return false;
> +
> + *guc_wopcm_base = reg_base & GUC_WOPCM_OFFSET_MASK;
> + *guc_wopcm_size = reg_size & GUC_WOPCM_SIZE_MASK;
> + return true;
> +}
> +
> +static int __wopcm_init_regs(struct xe_gt *gt, u32 base, u32 size)
> +{
> + u32 huc_agent = xe_uc_fw_is_available(>->uc.huc.fw) ? HUC_LOADING_AGENT_GUC : 0;
> + u32 mask;
> + int err;
> +
> + xe_gt_assert(gt, !(base & ~GUC_WOPCM_OFFSET_MASK));
> + xe_gt_assert(gt, !(size & ~GUC_WOPCM_SIZE_MASK));
> +
> + mask = GUC_WOPCM_SIZE_MASK | GUC_WOPCM_SIZE_LOCKED;
> + err = xe_mmio_write32_and_verify(>->mmio, GUC_WOPCM_SIZE, size, mask,
> + size | GUC_WOPCM_SIZE_LOCKED);
> + if (err)
> + goto err_out;
> +
> + mask = GUC_WOPCM_OFFSET_MASK | GUC_WOPCM_OFFSET_VALID | huc_agent;
> + err = xe_mmio_write32_and_verify(>->mmio, DMA_GUC_WOPCM_OFFSET,
> + base | huc_agent, mask,
> + base | huc_agent |
> + GUC_WOPCM_OFFSET_VALID);
> + if (err)
> + goto err_out;
> +
> + xe_gt_dbg(gt, "Programmed GuC WOPCM [b=%uK, s=%uK]\n", base / SZ_1K, size / SZ_1K);
> +
> + return 0;
> +
> +err_out:
> + xe_gt_notice(gt, "Failed to init uC WOPCM registers to [b=%uK, s=%uK]!\n",
> + base / SZ_1K, size / SZ_1K);
> + xe_gt_notice(gt, "%s(%#x)=%#x\n", "DMA_GUC_WOPCM_OFFSET",
> + DMA_GUC_WOPCM_OFFSET.addr,
> + xe_mmio_read32(>->mmio, DMA_GUC_WOPCM_OFFSET));
> + xe_gt_notice(gt, "%s(%#x)=%#x\n", "GUC_WOPCM_SIZE",
> + GUC_WOPCM_SIZE.addr,
> + xe_mmio_read32(>->mmio, GUC_WOPCM_SIZE));
> +
> + return err;
> +}
> +
> +static int uc_program_wopcm(struct xe_uc *uc)
> +{
> + struct xe_gt *gt = uc_to_gt(uc);
> + struct xe_tile *tile = gt_to_tile(gt);
> + u32 huc_fw_size = xe_uc_fw_get_upload_size(>->uc.huc.fw);
> + u32 wopcm_size = xe_tile_wopcm_size(tile);
> + u32 guc_wopcm_base;
> + u32 guc_wopcm_size;
> + bool locked;
[ ... ]
> + /*
> + * On legacy HW (pre-PVC) where the driver is responsible for
> + * programming the WOPCM registers, the WOPCM is divided into three
> + * regions, in order from bottom to top:
> + * 1 - The HuC region, which contains the HuC firmware + a 16KB reserved
> + * section.
> + * 2 - The GuC region, which contains the GuC firmware + a reserved
> + * section for GuC's usage.
> + * 3 - A reserved region for HW contexts, which is 36KB in size.
> + *
> + * To keep the math simple, we remove the HW context region from the
> + * WOPCM size, calculate the size of region 1 and then leave the
> + * remaining area for region 2. The official binaries are guaranteed to
> + * fit in the WOPCM, so the math below can only go wrong if a user is
> + * manipulating the blobs. In such a scenario, we'll catch the error at
> + * FW load time, so no need to double verify it here.
> + */
> + wopcm_size -= (SZ_32K + SZ_4K);
> +
> + guc_wopcm_base = huc_fw_size + SZ_16K;
> + guc_wopcm_base = ALIGN(guc_wopcm_base, 1UL << GUC_WOPCM_OFFSET_SHIFT);
> +
> + guc_wopcm_size = wopcm_size - guc_wopcm_base; /* already 4KB aligned */
> +
> + return __wopcm_init_regs(gt, guc_wopcm_base, guc_wopcm_size);
> +}
[Severity: Medium]
Can guc_wopcm_size underflow u32 here when a modified or oversized HuC
firmware blob is supplied?
Firmware header parsing in parse_headers() only checks that ucode_size and
rsa_size fit within the loaded file, not within the tile's WOPCM size. If
guc_wopcm_base exceeds wopcm_size (or equals it), wopcm_size -
guc_wopcm_base wraps around (or becomes 0) while remaining 4KB-aligned, so
it passes the GUC_WOPCM_SIZE_MASK check in __wopcm_init_regs() and locks
the write-once GUC_WOPCM_SIZE and DMA_GUC_WOPCM_OFFSET hardware registers
with corrupt values before firmware load runs.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261119230423.322057-3-daniele.ceraolospurio@intel.com?part=2
next prev parent reply other threads:[~2026-11-19 23:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 23:04 [PATCH v5 1/2] drm/xe/wopcm: Use the size from HW when excluding the wopcm range from GGTT Daniele Ceraolo Spurio
2026-11-19 23:04 ` [PATCH v5 2/2] drm/xe/wopcm: Simplify GuC WOPCM programming Daniele Ceraolo Spurio
2026-11-19 23:15 ` sashiko-bot [this message]
2026-11-19 23:31 ` Ceraolo Spurio, Daniele
2026-11-20 2:32 ` ✗ CI.checkpatch: warning for series starting with [v5,1/2] drm/xe/wopcm: Use the size from HW when excluding the wopcm range from GGTT Patchwork
2026-11-20 2:34 ` ✓ CI.KUnit: success " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-224176@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=daniele.ceraolospurio@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox