Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Ankit Nautiyal" <ankit.k.nautiyal@intel.com>,
	intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Subject: Re: [PATCH 25/29] drm/i915/dp: Allow limiting the DSC slice count for the downstream device
Date: Fri, 20 Nov 2026 14:41:16 +0000	[thread overview]
Message-ID: <sashiko-outbox-225399@kernel.org> (raw)
In-Reply-To: <20261120140729.466177-26-ankit.k.nautiyal@intel.com>

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] drm/i915/dp: DFP slice limits bypassed in UHBR TU and
  min_hblank paths
--

commit ebe2f0e6460b71fe1655c9706717ef4b175b371c
Author: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

drm/i915/dp: Allow limiting the DSC slice count for the downstream device

This commit adds minimum and maximum downstream facing port DSC slice count
limits to struct link_config_limits and applies them when selecting a DSC
slice configuration.

> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 0ac4e26666c30..1cd5385618ddb 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
[ ... ]
> @@ -971,7 +977,7 @@ u8 intel_dp_dsc_get_slice_count(const struct intel_connector *connector,
>  
>  	if (!intel_dp_dsc_get_slice_config(connector,
>  					   mode_clock, mode_hdisplay,
> -					   num_joined_pipes, &config))
> +					   num_joined_pipes, 0, INT_MAX, &config))
>  		return 0;
>  
>  	return intel_dsc_line_slice_count(&config);
> @@ -2616,6 +2622,8 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
>  
>  	if (!intel_dp_dsc_get_slice_config(connector, adjusted_mode->crtc_clock,
>  					   adjusted_mode->crtc_hdisplay, num_joined_pipes,
> +					   limits->dfp_dsc.min_slices,
> +					   limits->dfp_dsc.max_slices,
>  					   &pipe_config->dsc.slice_config))
>  		return -EINVAL;

[Severity: Medium]
Does passing 0 and INT_MAX in intel_dp_dsc_get_slice_count() cause UHBR link
TU calculations and intel_dp_compute_min_hblank() to use an unconstrained
slice count when limits->dfp_dsc restricts the downstream slice count?

Before intel_dp_dsc_compute_config() populates
pipe_config->dsc.slice_config with limits->dfp_dsc,
intel_dp_dsc_compute_pipe_bpp() -> dsc_compute_compressed_bpp() ->
dsc_compute_link_config() calls intel_dp_mtp_tu_compute_config() on UHBR
links, which queries the slice count via
intel_dp_mst_dsc_get_slice_count() -> intel_dp_dsc_get_slice_count().
Later, intel_dp_compute_min_hblank() also calls
intel_dp_dsc_get_slice_count() instead of reading
intel_dsc_line_slice_count(&crtc_state->dsc.slice_config).  When a
downstream device requires a higher minimum (or lower maximum) slice count
than the DP sink, DSC EOC overhead, pipe_config->dp_m_n, and
pipe_config->min_hblank will be computed for a different slice count than
the one programmed in pipe_config->dsc.slice_config.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261120140729.466177-1-ankit.k.nautiyal@intel.com?part=25

  reply	other threads:[~2026-11-20 14:41 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 14:07 [PATCH 00/29] DP-HDMI PCON DSC fixes Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 01/29] drm/i915/hdmi: Split the intel_hdmi_dsc_get_bpp() Ankit Nautiyal
2026-11-20 14:32   ` sashiko-bot
2026-11-20 14:07 ` [PATCH 02/29] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP Ankit Nautiyal
2026-11-20 14:34   ` sashiko-bot
2026-11-20 14:07 ` [PATCH 03/29] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 04/29] drm/i915/dp: Use the common downstream bw check in compute_bpc Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 05/29] drm/i915/hdmi: Expose DSC min/max bpp helpers Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 06/29] drm/i915/hdmi: Add helper to check if DSC chunksize fits the sink limits Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 07/29] drm/i915/hdmi: Pass pixel clock to DSC slice helper Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 08/29] drm/i915/dp: Account for FRL 16b/18b encoding overhead Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 09/29] drm/i915/hdmi: Clamp the target_bpp only when it equals the link bpp Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 10/29] drm/i915/dp: Add PCON DSC state to crtc_state Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 11/29] drm/dp: Add a helper to disable the PCON DSC encoder Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 12/29] drm/i915/dp: Compute the PCON DSC operation Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 13/29] drm/i915/dp: Disable the PCON DSC encoder unless it is needed Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 14/29] drm/i915/dp: Clamp PCON DSC bpp to the FRL link bandwidth Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 15/29] drm/i915/dp: Add a helper for the DSC stream version Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 16/29] drm/i915/dp: Add a helper for the FRL payload bandwidth Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 17/29] drm/i915/dp: Compute the PCON DSC encoder parameters Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 18/29] drm/i915/dp: Retrain the PCON FRL link from the link check work Ankit Nautiyal
2026-11-20 14:46   ` sashiko-bot
2026-11-20 14:07 ` [PATCH 19/29] drm/i915/dp: Store the PCON FRL rate in the crtc state Ankit Nautiyal
2026-11-20 14:39   ` sashiko-bot
2026-11-20 14:07 ` [PATCH 20/29] drm/i915/dp: Use the FRL rate of the stream on the HDMI link Ankit Nautiyal
2026-11-20 14:43   ` sashiko-bot
2026-11-20 14:07 ` [PATCH 21/29] drm/i915/dp: Allow PCON DSC modes through the FRL bw check Ankit Nautiyal
2026-11-20 14:48   ` sashiko-bot
2026-11-20 14:07 ` [PATCH 22/29] drm/i915/dp: Enable DSC pass-through in the PCON Ankit Nautiyal
2026-11-20 14:38   ` sashiko-bot
2026-11-20 14:07 ` [PATCH 23/29] drm/i915/dp: Limit the DP link bpp for DSC pass-through to the FRL bandwidth Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 24/29] drm/i915/dp: Select DSC pass-through in the PCON for DSC 1.2a streams Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 25/29] drm/i915/dp: Allow limiting the DSC slice count for the downstream device Ankit Nautiyal
2026-11-20 14:41   ` sashiko-bot [this message]
2026-11-20 14:07 ` [PATCH 26/29] drm/i915/dp: Check the HDMI sink slice limits for DSC pass-through Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 27/29] drm/i915/dp: Pick the DSC slice count for pass-through within the HDMI limits Ankit Nautiyal
2026-11-20 14:48   ` sashiko-bot
2026-11-20 14:07 ` [PATCH 28/29] drm/i915/dp: Limit the compressed bpp for pass-through to the HDMI sink Ankit Nautiyal
2026-11-20 14:07 ` [PATCH 29/29] drm/i915/dp: Accept DSC 1.2a pass-through modes in the PCON mode check Ankit Nautiyal
2026-11-20 14:33 ` ✗ CI.checkpatch: warning for DP-HDMI PCON DSC fixes (rev4) Patchwork
2026-11-20 14:35 ` ✓ CI.KUnit: success " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-225399@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox