Re: [PATCH v3 4/4] fsx: add IO_URING test

Zorro Lang
2020-09-06T15:43:23Z

On Thu, Sep 03, 2020 at 08:44:13AM -0400, Brian Foster wrote:
> On Sun, Aug 23, 2020 at 02:30:32PM +0800, Zorro Lang wrote:
> > New IO_URING test for fsx, use -U option to enable IO_URING test.
> >
> > Signed-off-by: Zorro Lang <zlang@redhat.com>
> > ---
>
> Note that this one doesn't compile if one of the ifdefs doesn't evaluate
> true:
>
> fsx.c:2551:6: error: #elif with no expression
> 2551 | #elif
> | ^
> [CC] fsx
> fsx.c: In function 'fsx_rw':
> fsx.c:2551:6: error: #elif with no expression
> 2551 | #elif
> | ^
> gmake[2]: *** [Makefile:52: fsx] Error 1
> gmake[1]: *** [include/buildrules:30: ltp] Error 2
> make: *** [Makefile:53: default] Error 2
>
> I suspect you want to replace both of those with #else. Otherwise mostly
> some aesthetic comments...

Sorry, that's truely a mistake, I'll fix it :)

>
> > ltp/fsx.c | 158 +++++++++++++++++++++++++++++++++++++++++++++++++-----
> > 1 file changed, 144 insertions(+), 14 deletions(-)
> >
> > diff --git a/ltp/fsx.c b/ltp/fsx.c
> > index 7c76655a..05663528 100644
> > --- a/ltp/fsx.c
> > +++ b/ltp/fsx.c
> ...
> > @@ -176,21 +179,17 @@ int integrity = 0; /* -i flag */
> > int fsxgoodfd = 0;
> > int o_direct; /* -Z */
> > int aio = 0;
> > +int uring = 0;
> > int mark_nr = 0;
> >
> > int page_size;
> > int page_mask;
> > int mmap_mask;
> > -#ifdef AIO
> > -int aio_rw(int rw, int fd, char *buf, unsigned len, unsigned offset);
> > +int fsx_rw(int rw, int fd, char *buf, unsigned len, unsigned offset);
> > #define READ 0
> > #define WRITE 1
> > -#define fsxread(a,b,c,d) aio_rw(READ, a,b,c,d)
> > -#define fsxwrite(a,b,c,d) aio_rw(WRITE, a,b,c,d)
> > -#else
> > -#define fsxread(a,b,c,d) read(a,b,c)
> > -#define fsxwrite(a,b,c,d) write(a,b,c)
> > -#endif
> > +#define fsxread(a,b,c,d) fsx_rw(READ, a,b,c,d)
> > +#define fsxwrite(a,b,c,d) fsx_rw(WRITE, a,b,c,d)
> >
>
> Could we do the refactoring that introduces fsx_rw and shuffles around
> some of the existing AIO in an initial refactoring patch?

May I save this pre-patch, if you don't insist on that :-P

>
> > const char *replayops = NULL;
> > const char *recordops = NULL;
> ...
> > @@ -2425,13 +2427,131 @@ out_error:
> > errno = -ret;
> > return -1;
> > }
> > +#endif
> > +
> > +#ifdef URING
>
> A whitespace line here...
>
> > +struct io_uring ring;
> > +#define URING_ENTRIES 1024
>
> ... and here would help readability.
>
> > +int
> > +uring_setup()
> > +{
> > + int ret;
> > +
> > + ret = io_uring_queue_init(URING_ENTRIES, &ring, 0);
> > + if (ret != 0) {
> > + fprintf(stderr, "uring_setup: io_uring_queue_init failed: %s\n",
> > + strerror(ret));
> > + return -1;
> > + }
> > + return 0;
>
> Looks like some whitespace damage here.
>
> Also, the fsstress patch has a io_uring_queue_exit() call but I don't
> see one in this patch. Is that not needed?

There's not aio_destroy() either. I think due to fsstress is a multi-process
test, so it'd like to destroy io_uring or aio at each process end. But fsx is
a pure single process test, the io_uring or aio will destroyed when fsx exit.
I can add io_uring_queue_exit() and aio_destroy() if you think it would be
better.

>
> > +}
> >
> > -int aio_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
> > +int
> > +__uring_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
>
> Do we still need the __ in the function names here and for __aio_rw()?

I don't think it's needed. I use the "__" just due to the old __aio_rw() has. I
can remove both "__" of __aio_rw and __uring_rw.

>
> > {
> > + struct io_uring_sqe *sqe;
> > + struct io_uring_cqe *cqe;
> > + struct iovec iovec;
> > int ret;
> > + int res, res2 = 0;
> > + char *p = buf;
> > + unsigned l = len;
> > + unsigned o = offset;
> > +
> > +
> > + /*
> > + * Due to io_uring tries non-blocking IOs (especially read), that
> > + * always cause 'normal' short reading. To avoid this short read
> > + * fail, try to loop read/write (escpecilly read) data.
> > + */
> > + uring_loop:
> > + sqe = io_uring_get_sqe(&ring);
> > + if (!sqe) {
> > + fprintf(stderr, "uring_rw: io_uring_get_sqe failed: %s\n",
> > + strerror(errno));
> > + return -1;
> > + }
> > +
> > + iovec.iov_base = p;
> > + iovec.iov_len = l;
> > + if (rw == READ) {
> > + io_uring_prep_readv(sqe, fd, &iovec, 1, o);
> > + } else {
> > + io_uring_prep_writev(sqe, fd, &iovec, 1, o);
> > + }
> > +
> > + ret = io_uring_submit_and_wait(&ring, 1);
> > + if (ret != 1) {
> > + fprintf(stderr, "errcode=%d\n", -ret);
> > + fprintf(stderr, "uring %s: io_uring_submit failed: %s\n",
> > + rw == READ ? "read":"write", strerror(-ret));
> > + goto uring_error;
> > + }
> > +
> > + ret = io_uring_wait_cqe(&ring, &cqe);
> > + if (ret < 0) {
> > + if (ret == 0)
>
> That doesn't look right since we only get here if ret < 0.

Thanks, it should be (ret <= 0)

>
> > + fprintf(stderr, "uring %s: no events available\n",
> > + rw == READ ? "read":"write");
> > + else {
> > + fprintf(stderr, "errcode=%d\n", -ret);
> > + fprintf(stderr, "uring %s: io_uring_wait_cqe failed: %s\n",
> > + rw == READ ? "read":"write", strerror(-ret));
> > + }
> > + goto uring_error;
> > + }
> > + res = cqe->res;
> > + io_uring_cqe_seen(&ring, cqe);
> > +
> > + res2 += res;
> > + if (len != res2) {
> > + if (res > 0) {
> > + o += res;
> > + l -= res;
> > + p += res;
> > + if (l > 0)
> > + goto uring_loop;
> > + } else if (res < 0) {
> > + ret = res;
> > + fprintf(stderr, "errcode=%d\n", -ret);
> > + fprintf(stderr, "uring %s: io_uring failed: %s\n",
> > + rw == READ ? "read":"write", strerror(-ret));
> > + goto uring_error;
>
> Can we elevate the error checks into the top level rather than nesting
> logic like this? It's a little confusing to read and it looks
> particularly odd since we've already done res2 += res before we get
> here.
>
> Also I'm wondering if this whole function would read a little better as
> a do {} while() loop rather than using a label and goto.

Sure, I'll try to change that.

>
> > + } else {
> > + fprintf(stderr, "uring %s bad io length: %d instead of %u\n",
> > + rw == READ ? "read":"write", res2, len);
> > + }
> > + }
> > + return res2;
> > +
> > + uring_error:
> > + /*
> > + * The caller expects error return in traditional libc
> > + * convention, i.e. -1 and the errno set to error.
> > + */
> > + errno = -ret;
> > + return -1;
> > +}
> > +#endif
> > +
> > +int fsx_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
> > +{
> > + int ret = -1;
> >
> > if (aio) {
> > +#ifdef AIO
> > ret = __aio_rw(rw, fd, buf, len, offset);
> > +#elif
> > + fprintf(stderr, "io_rw: need AIO support!\n");
> > + exit(111);
> > +#endif
> > + } else if (uring) {
> > +#ifdef URING
> > + ret = __uring_rw(rw, fd, buf, len, offset);
> > +#elif
> > + fprintf(stderr, "io_rw: need IO_URING support!\n");
> > + exit(111);
> > +#endif
>
> I think the ifdefs would be cleaner if used to define stubbed out
> variants of the associated functions. E.g.:
>
> #ifdef URING
> int
> __uring_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
> {
> <do uring I/O>
> }
> #else
> int
> __uring_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
> {
> fprintf(stderr, "io_rw: need IO_URING support!\n");
> exit(111);
> }
> #endif

Sure, will do that.

Thanks for your review, Brian!
Zorro

>
> Brian
>
> > } else {
> > if (rw == READ)
> > ret = read(fd, buf, len);
> > @@ -2441,8 +2561,6 @@ int aio_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
> > return ret;
> > }
> >
> > -#endif
> > -
> > #define test_fallocate(mode) __test_fallocate(mode, #mode)
> >
> > int
> > @@ -2496,7 +2614,7 @@ main(int argc, char **argv)
> > setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
> >
> > while ((ch = getopt_long(argc, argv,
> > - "b:c:dfg:i:j:kl:m:no:p:qr:s:t:w:xyABD:EFJKHzCILN:OP:RS:WXZ",
> > + "b:c:dfg:i:j:kl:m:no:p:qr:s:t:w:xyABD:EFJKHzCILN:OP:RS:UWXZ",
> > longopts, NULL)) != EOF)
> > switch (ch) {
> > case 'b':
> > @@ -2604,6 +2722,9 @@ main(int argc, char **argv)
> > case 'A':
> > aio = 1;
> > break;
> > + case 'U':
> > + uring = 1;
> > + break;
> > case 'D':
> > debugstart = getnum(optarg, &endp);
> > if (debugstart < 1)
> > @@ -2694,6 +2815,11 @@ main(int argc, char **argv)
> > if (argc != 1)
> > usage();
> >
> > + if (aio && uring) {
> > + fprintf(stderr, "-A and -U shouldn't be used together\n");
> > + usage();
> > + }
> > +
> > if (integrity && !dirpath) {
> > fprintf(stderr, "option -i <logdev> requires -P <dirpath>\n");
> > usage();
> > @@ -2784,6 +2910,10 @@ main(int argc, char **argv)
> > if (aio)
> > aio_setup();
> > #endif
> > +#ifdef URING
> > + if (uring)
> > + uring_setup();
> > +#endif
> >
> > if (!(o_flags & O_TRUNC)) {
> > off_t ret;
> > --
> > 2.20.1
> >