public inbox for iwd@lists.linux.dev
 help / color / mirror / Atom feed
From: James Prestwood <prestwoj@gmail.com>
To: iwd@lists.linux.dev
Cc: James Prestwood <prestwoj@gmail.com>
Subject: [PATCH v3 8/8] auto-t: add tests for Affinities behavior
Date: Fri, 23 Aug 2024 11:00:06 -0700	[thread overview]
Message-ID: <20240823180006.317353-8-prestwoj@gmail.com> (raw)
In-Reply-To: <20240823180006.317353-1-prestwoj@gmail.com>

---
 autotests/testAffinity/TestFT.psk           |   2 +
 autotests/testAffinity/ft-psk-ccmp-1.conf   |  41 ++++
 autotests/testAffinity/ft-psk-ccmp-2.conf   |  41 ++++
 autotests/testAffinity/hw.conf              |   8 +
 autotests/testAffinity/main.conf            |   5 +
 autotests/testAffinity/test_set_affinity.py | 216 ++++++++++++++++++++
 6 files changed, 313 insertions(+)
 create mode 100644 autotests/testAffinity/TestFT.psk
 create mode 100644 autotests/testAffinity/ft-psk-ccmp-1.conf
 create mode 100644 autotests/testAffinity/ft-psk-ccmp-2.conf
 create mode 100644 autotests/testAffinity/hw.conf
 create mode 100644 autotests/testAffinity/main.conf
 create mode 100644 autotests/testAffinity/test_set_affinity.py

diff --git a/autotests/testAffinity/TestFT.psk b/autotests/testAffinity/TestFT.psk
new file mode 100644
index 00000000..e82d1295
--- /dev/null
+++ b/autotests/testAffinity/TestFT.psk
@@ -0,0 +1,2 @@
+[Security]
+Passphrase=EasilyGuessedPassword
diff --git a/autotests/testAffinity/ft-psk-ccmp-1.conf b/autotests/testAffinity/ft-psk-ccmp-1.conf
new file mode 100644
index 00000000..839eb496
--- /dev/null
+++ b/autotests/testAffinity/ft-psk-ccmp-1.conf
@@ -0,0 +1,41 @@
+hw_mode=g
+channel=1
+ssid=TestFT
+utf8_ssid=1
+ctrl_interface=/var/run/hostapd
+
+r1_key_holder=120000000001
+nas_identifier=dummy1
+
+wpa=2
+# Can support WPA-PSK and FT-PSK (space separated list) and/or EAP at the same
+# time but we want to force FT
+wpa_key_mgmt=FT-PSK
+wpa_pairwise=CCMP
+wpa_passphrase=EasilyGuessedPassword
+ieee80211w=0
+rsn_preauth=1
+rsn_preauth_interfaces=lo
+disable_pmksa_caching=0
+# Allow PMK cache to be shared opportunistically among configured interfaces
+# and BSSes (i.e., all configurations within a single hostapd process).
+okc=1
+mobility_domain=1234
+reassociation_deadline=60000
+r0kh=12:00:00:00:00:01 dummy1 000102030405060708090a0b0c0d0e0f
+r0kh=12:00:00:00:00:02 dummy2 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:01 00:00:00:00:00:01 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:02 00:00:00:00:00:02 000102030405060708090a0b0c0d0e0f
+# Push mode only needed for 8021x, not PSK mode since msk already known
+pmk_r1_push=0
+# Allow locally generated FT response so we don't have to configure push/pull
+# between BSSes running as separate hostapd processes as in the test-runner
+# case.  Only works with FT-PSK, otherwise brctl needs to be installed and
+# CONFIG_BRIDGE enabled in the kernel.
+ft_psk_generate_local=1
+rkh_pull_timeout=50
+ft_over_ds=0
+ap_table_expiration_time=36000
+ap_table_max_size=10
+rrm_neighbor_report=1
+ocv=1
diff --git a/autotests/testAffinity/ft-psk-ccmp-2.conf b/autotests/testAffinity/ft-psk-ccmp-2.conf
new file mode 100644
index 00000000..2ffd7262
--- /dev/null
+++ b/autotests/testAffinity/ft-psk-ccmp-2.conf
@@ -0,0 +1,41 @@
+hw_mode=g
+channel=2
+ssid=TestFT
+utf8_ssid=1
+ctrl_interface=/var/run/hostapd
+
+r1_key_holder=120000000002
+nas_identifier=dummy2
+
+wpa=2
+# Can support WPA-PSK and FT-PSK (space separated list) and/or EAP at the same
+# time but we want to force FT
+wpa_key_mgmt=FT-PSK
+wpa_pairwise=CCMP
+wpa_passphrase=EasilyGuessedPassword
+ieee80211w=0
+rsn_preauth=1
+rsn_preauth_interfaces=lo
+disable_pmksa_caching=0
+# Allow PMK cache to be shared opportunistically among configured interfaces
+# and BSSes (i.e., all configurations within a single hostapd process).
+okc=1
+mobility_domain=1234
+reassociation_deadline=60000
+r0kh=12:00:00:00:00:01 dummy1 000102030405060708090a0b0c0d0e0f
+r0kh=12:00:00:00:00:02 dummy2 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:01 00:00:00:00:00:01 000102030405060708090a0b0c0d0e0f
+r1kh=12:00:00:00:00:02 00:00:00:00:00:02 000102030405060708090a0b0c0d0e0f
+# Push mode only needed for 8021x, not PSK mode since msk already known
+pmk_r1_push=0
+# Allow locally generated FT response so we don't have to configure push/pull
+# between BSSes running as separate hostapd processes as in the test-runner
+# case.  Only works with FT-PSK, otherwise brctl needs to be installed and
+# CONFIG_BRIDGE enabled in the kernel.
+ft_psk_generate_local=1
+rkh_pull_timeout=50
+ft_over_ds=0
+ap_table_expiration_time=36000
+ap_table_max_size=10
+rrm_neighbor_report=1
+ocv=1
diff --git a/autotests/testAffinity/hw.conf b/autotests/testAffinity/hw.conf
new file mode 100644
index 00000000..c2b35d6e
--- /dev/null
+++ b/autotests/testAffinity/hw.conf
@@ -0,0 +1,8 @@
+[SETUP]
+num_radios=3
+start_iwd=0
+hwsim_medium=yes
+
+[HOSTAPD]
+rad0=ft-psk-ccmp-1.conf
+rad1=ft-psk-ccmp-2.conf
diff --git a/autotests/testAffinity/main.conf b/autotests/testAffinity/main.conf
new file mode 100644
index 00000000..3d93ff57
--- /dev/null
+++ b/autotests/testAffinity/main.conf
@@ -0,0 +1,5 @@
+[Scan]
+DisableMacAddressRandomization=true
+
+[General]
+RoamRetryInterval=1
diff --git a/autotests/testAffinity/test_set_affinity.py b/autotests/testAffinity/test_set_affinity.py
new file mode 100644
index 00000000..5754aee0
--- /dev/null
+++ b/autotests/testAffinity/test_set_affinity.py
@@ -0,0 +1,216 @@
+#! /usr/bin/python3
+
+import unittest
+import sys, os
+import dbus
+
+sys.path.append('../util')
+from config import ctx
+import iwd
+from iwd import IWD, IWDDBusAbstract
+from iwd import NetworkType
+from hwsim import Hwsim
+from hostapd import HostapdCLI
+
+#
+# Separate client used to test DBus disconnects so we don't bring down the
+# entire IWD python library
+#
+class AffinityClient(IWDDBusAbstract):
+    def __init__(self, device_path):
+        self._bus = dbus.bus.BusConnection(address_or_type=ctx.dbus_address)
+        self._station_prop_if = dbus.Interface(
+                        self._bus.get_object(iwd.IWD_SERVICE, device_path),
+                        iwd.DBUS_PROPERTIES)
+
+    def set(self, values):
+        self._station_prop_if.Set(iwd.IWD_STATION_INTERFACE, 'Affinities', dbus.Array([dbus.ObjectPath(v) for v in values], signature="o"))
+
+    def close(self):
+        self._bus.close()
+
+class Test(unittest.TestCase):
+    def connect(self, device, hapd):
+        ordered_network = device.get_ordered_network('TestFT', full_scan=True)
+
+        self.assertEqual(ordered_network.type, NetworkType.psk)
+
+        condition = 'not obj.connected'
+        self.wd.wait_for_object_condition(ordered_network.network_object, condition)
+
+        device.connect_bssid(hapd.bssid)
+
+        condition = 'obj.state == DeviceState.connected'
+        self.wd.wait_for_object_condition(device, condition)
+
+    def test_set_affinity(self):
+        device = self.wd.list_devices(1)[0]
+
+        self.connect(device, self.bss_hostapd[0])
+
+        print(device.connected_bss)
+
+        device.affinities = [device.connected_bss]
+
+        # IWD should not attempt to roam
+        with self.assertRaises(TimeoutError):
+            device.wait_for_event("roam-scan-triggered")
+
+        device.affinities = []
+        device.wait_for_event("roam-scan-triggered")
+
+    def test_roam_below_critical(self):
+        device = self.wd.list_devices(1)[0]
+
+        self.connect(device, self.bss_hostapd[0])
+
+        device.affinities = [device.connected_bss]
+
+        # IWD should not attempt to roam
+        with self.assertRaises(TimeoutError):
+            device.wait_for_event("roam-scan-triggered")
+
+        # Lower signal past critical level
+        self.bss0_rule.signal = -9000
+
+        device.wait_for_event("roam-scan-triggered")
+
+    def test_error_conditions(self):
+        device = self.wd.list_devices(1)[0]
+
+        # Calling set while disconnected should fail
+        with self.assertRaises(iwd.NotConnectedEx):
+            device.affinities = ["/some/path"]
+
+        self.connect(device, self.bss_hostapd[0])
+
+        device.affinities = [device.connected_bss]
+
+        # An invalid path should fail
+        with self.assertRaises(iwd.InvalidArgumentsEx):
+            device.affinities = [device.connected_bss, "/an/invalid/path"]
+
+    def test_affinity_client_disconnect(self):
+        device = self.wd.list_devices(1)[0]
+
+        client = AffinityClient(device.device_path)
+
+        self.connect(device, self.bss_hostapd[0])
+
+        client.set([device.connected_bss])
+
+        with self.assertRaises(TimeoutError):
+            device.wait_for_event("roam-scan-triggered")
+
+        client._bus.close()
+
+        device.wait_for_event("roam-scan-triggered")
+
+    def test_affinity_client_reconnect_during_roam(self):
+        device = self.wd.list_devices(1)[0]
+
+        client = AffinityClient(device.device_path)
+
+        self.connect(device, self.bss_hostapd[0])
+
+        client.set([device.connected_bss])
+
+        # Lower signal past critical level
+        self.bss0_rule.signal = -9000
+
+        device.wait_for_event("roam-scan-triggered")
+
+        client.close()
+        del client
+        client = AffinityClient(device.device_path)
+        # setting here should get cleared after connecting
+        client.set([device.connected_bss])
+
+        device.wait_for_event("ft-authenticating")
+        device.wait_for_event("associating")
+        device.wait_for_event("connected")
+
+        # Affinity should be reset, and IWD should be trying to roam
+        device.wait_for_event("roam-scan-triggered")
+
+    def test_cleanup_with_connected_client(self):
+        device = self.wd.list_devices(1)[0]
+
+        client = AffinityClient(device.device_path)
+
+        self.connect(device, self.bss_hostapd[0])
+
+        client.set([device.connected_bss])
+        self.wd.stop()
+
+    def test_affinity_removed_after_roam(self):
+        device = self.wd.list_devices(1)[0]
+
+        self.connect(device, self.bss_hostapd[0])
+
+        device.affinities = [device.connected_bss]
+
+        # Lower signal past critical level
+        self.bss0_rule.signal = -9000
+
+        device.wait_for_event("roam-scan-triggered")
+
+        device.wait_for_event("ft-authenticating")
+        device.wait_for_event("associating")
+        device.wait_for_event("connected")
+
+        self.assertEqual(device.affinities, [])
+
+    def tearDown(self):
+        os.system('ip link set "' + self.bss_hostapd[0].ifname + '" down')
+        os.system('ip link set "' + self.bss_hostapd[1].ifname + '" down')
+        os.system('ip link set "' + self.bss_hostapd[0].ifname + '" up')
+        os.system('ip link set "' + self.bss_hostapd[1].ifname + '" up')
+
+        self.wd.stop()
+        self.wd = None
+
+    def setUp(self):
+        self.bss0_rule.signal = -8000
+        self.bss1_rule.signal = -8000
+
+        self.wd = IWD(True)
+
+    @classmethod
+    def setUpClass(cls):
+        hwsim = Hwsim()
+
+        IWD.copy_to_storage('TestFT.psk')
+
+        cls.bss_hostapd = [ HostapdCLI(config='ft-psk-ccmp-1.conf'),
+                            HostapdCLI(config='ft-psk-ccmp-2.conf') ]
+
+        rad0 = hwsim.get_radio('rad0')
+        rad1 = hwsim.get_radio('rad1')
+
+        cls.bss0_rule = hwsim.rules.create()
+        cls.bss0_rule.source = rad0.addresses[0]
+        cls.bss0_rule.bidirectional = True
+        cls.bss0_rule.signal = -8000
+        cls.bss0_rule.enabled = True
+
+        cls.bss1_rule = hwsim.rules.create()
+        cls.bss1_rule.source = rad1.addresses[0]
+        cls.bss1_rule.bidirectional = True
+        cls.bss1_rule.signal = -8000
+        cls.bss1_rule.enabled = True
+
+        cls.bss_hostapd[0].set_address('12:00:00:00:00:01')
+        cls.bss_hostapd[1].set_address('12:00:00:00:00:02')
+
+        HostapdCLI.group_neighbors(*cls.bss_hostapd)
+
+    @classmethod
+    def tearDownClass(cls):
+        IWD.clear_storage()
+        cls.bss_hostapd = None
+        cls.bss0_rule.remove()
+        cls.bss1_rule.remove()
+
+if __name__ == '__main__':
+    unittest.main(exit=True)
-- 
2.34.1


      parent reply	other threads:[~2024-08-23 18:00 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-23 17:59 [PATCH v3 1/8] doc: Document station Affinities property James Prestwood
2024-08-23 18:00 ` [PATCH v3 2/8] netdev: define netdev settings in netdev.h James Prestwood
2024-08-23 21:03   ` Ryan Smith
2024-08-23 22:24     ` James Prestwood
2024-08-23 18:00 ` [PATCH v3 3/8] netdev: store signal threshold in netdev object, not globally James Prestwood
2024-08-23 18:00 ` [PATCH v3 4/8] netdev: add critical signal threshold level James Prestwood
2024-08-23 18:00 ` [PATCH v3 5/8] station: add Affinities DBus property James Prestwood
2024-08-23 18:00 ` [PATCH v3 6/8] station: Use Affinities property to change roaming threshold James Prestwood
2024-08-23 18:00 ` [PATCH v3 7/8] auto-t: add affinities property for station, and extended_service_set James Prestwood
2024-08-23 18:00 ` James Prestwood [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240823180006.317353-8-prestwoj@gmail.com \
    --to=prestwoj@gmail.com \
    --cc=iwd@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox