public inbox for iwd@lists.linux.dev
 help / color / mirror / Atom feed
From: James Prestwood <prestwoj@gmail.com>
To: iwd@lists.linux.dev
Cc: James Prestwood <prestwoj@gmail.com>
Subject: [PATCH 00/15] PMKSA support (SAE only)
Date: Fri, 22 Nov 2024 07:15:36 -0800	[thread overview]
Message-ID: <20241122151551.286355-1-prestwoj@gmail.com> (raw)

This adds support for PMKSA-based connections. For now only SAE and
SAE-FT are supported. This was done for a few reasons:
 - PMKSA with WPA2 doesn't make a whole lot of sense. There is no
   real benefit to using PMKSA over full association.
 - PMKSA is required by the WiFi Alliance for WPA3 certificaion

Missing features include:
 - 802.1x support, this may be added at a later date.
 - Filesystem storage of PMKSA caches. For now this just hasn't
   been implemented.

Denis Kenzior (4):
  pmksa: Add skeleton
  unit: Add basic pmksa test
  pmksa: Add debugging
  handshake: Add pmksa setter & stealer

James Prestwood (11):
  handshake: add ref counting to handshake_state
  unit: update use of handshake_state with ref/unref
  auto-t: always initialize StationDebug in Device class
  auto-t: add pmksa_flush() to hostapd module
  auto-t: update testSAE to disable PMKSA
  handshake: add handshake_state_remove_pmksa
  netdev: add support to use PMKSA over SAE if available
  station: hold reference to handshake object
  station: support PMKSA connections
  auto-t: add PMKSA tests
  doc: document DisablePMKSA option

 .gitignore                                 |   1 +
 Makefile.am                                |  18 +-
 autotests/testPMKSA-SAE/connection_test.py | 114 ++++++++++
 autotests/testPMKSA-SAE/hw.conf            |   7 +
 autotests/testPMKSA-SAE/ssidSAE.conf       |  12 ++
 autotests/testSAE-roam/connection_test.py  |  60 +++++-
 autotests/testSAE/main.conf                |   3 +
 autotests/util/hostapd.py                  |   4 +
 autotests/util/iwd.py                      |   4 +-
 src/adhoc.c                                |   4 +-
 src/ap.c                                   |   2 +-
 src/handshake.c                            | 105 ++++++++-
 src/handshake.h                            |  21 +-
 src/iwd.config.rst                         |   5 +
 src/netdev.c                               |  31 ++-
 src/p2p.c                                  |   2 +-
 src/pmksa.c                                | 235 +++++++++++++++++++++
 src/pmksa.h                                |  46 ++++
 src/station.c                              |  90 +++++++-
 src/wsc.c                                  |   2 +-
 unit/test-eapol.c                          |  38 ++--
 unit/test-pmksa.c                          | 164 ++++++++++++++
 unit/test-sae.c                            |  15 +-
 unit/test-wsc.c                            |  10 +-
 24 files changed, 942 insertions(+), 51 deletions(-)
 create mode 100644 autotests/testPMKSA-SAE/connection_test.py
 create mode 100644 autotests/testPMKSA-SAE/hw.conf
 create mode 100644 autotests/testPMKSA-SAE/ssidSAE.conf
 create mode 100644 src/pmksa.c
 create mode 100644 src/pmksa.h
 create mode 100644 unit/test-pmksa.c

-- 
2.34.1


             reply	other threads:[~2024-11-22 15:15 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-22 15:15 James Prestwood [this message]
2024-11-22 15:15 ` [PATCH 01/15] handshake: add ref counting to handshake_state James Prestwood
2024-11-22 15:15 ` [PATCH 02/15] unit: update use of handshake_state with ref/unref James Prestwood
2024-11-22 15:15 ` [PATCH 03/15] auto-t: always initialize StationDebug in Device class James Prestwood
2024-11-22 15:15 ` [PATCH 04/15] auto-t: add pmksa_flush() to hostapd module James Prestwood
2024-11-22 15:15 ` [PATCH 05/15] auto-t: update testSAE to disable PMKSA James Prestwood
2024-11-22 15:15 ` [PATCH 06/15] pmksa: Add skeleton James Prestwood
2024-11-22 15:15 ` [PATCH 07/15] unit: Add basic pmksa test James Prestwood
2024-11-22 15:15 ` [PATCH 08/15] pmksa: Add debugging James Prestwood
2024-11-22 15:15 ` [PATCH 09/15] handshake: Add pmksa setter & stealer James Prestwood
2024-11-25 14:56   ` Denis Kenzior
2024-11-25 15:01     ` James Prestwood
2024-11-25 19:25       ` Bryce Johnson
2024-11-25 19:49         ` James Prestwood
2024-11-25 20:18           ` Bryce Johnson
2024-11-22 15:15 ` [PATCH 10/15] handshake: add handshake_state_remove_pmksa James Prestwood
2024-11-22 15:15 ` [PATCH 11/15] netdev: add support to use PMKSA over SAE if available James Prestwood
2024-11-22 15:15 ` [PATCH 12/15] station: hold reference to handshake object James Prestwood
2024-11-22 15:15 ` [PATCH 13/15] station: support PMKSA connections James Prestwood
2024-11-22 15:15 ` [PATCH 14/15] auto-t: add PMKSA tests James Prestwood
2024-11-22 15:15 ` [PATCH 15/15] doc: document DisablePMKSA option James Prestwood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241122151551.286355-1-prestwoj@gmail.com \
    --to=prestwoj@gmail.com \
    --cc=iwd@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox