[PATCH 5/8] blacklist: add new blacklist reason, ROAM_REQUESTED

[James Prestwood <prestwoj@gmail.com>]

This adds a new blacklist reason as well as an option to configure
the timeout. This blacklist reason will be used in cases where a
BSS has requested IWD roam elsewhere. At that time a new blacklist
entry will be added which will be used along with some other criteria
to determine if IWD should connect/roam to that BSS again.
---
 src/blacklist.c | 16 ++++++++++++++++
 src/blacklist.h |  7 +++++++
 2 files changed, 23 insertions(+)

diff --git a/src/blacklist.c b/src/blacklist.c
index eef3f730..178cb41c 100644
--- a/src/blacklist.c
+++ b/src/blacklist.c
@@ -45,6 +45,7 @@
 
 static uint64_t blacklist_multiplier;
 static uint64_t blacklist_initial_timeout;
+static uint64_t blacklist_roam_initial_timeout;
 static uint64_t blacklist_max_timeout;
 
 struct blacklist_entry {
@@ -86,6 +87,13 @@ static struct blacklist_entry *blacklist_entry_new(const uint8_t *addr,
 		added = 0;
 		expires = 0;
 		break;
+	case BLACKLIST_REASON_ROAM_REQUESTED:
+		if (!blacklist_roam_initial_timeout)
+			return NULL;
+
+		added = l_time_now();
+		expires = l_time_offset(added, blacklist_roam_initial_timeout);
+		break;
 	default:
 		l_warn("Unhandled blacklist reason: %u", reason);
 		return NULL;
@@ -211,6 +219,14 @@ static int blacklist_init(void)
 	/* For easier user configuration the timeout values are in seconds */
 	blacklist_initial_timeout *= L_USEC_PER_SEC;
 
+	if (!l_settings_get_uint64(config, "Blacklist",
+					"InitialRoamRequestedTimeout",
+					&blacklist_roam_initial_timeout))
+		blacklist_roam_initial_timeout = BLACKLIST_DEFAULT_TIMEOUT;
+
+	/* For easier user configuration the timeout values are in seconds */
+	blacklist_roam_initial_timeout *= L_USEC_PER_SEC;
+
 	if (!l_settings_get_uint64(config, "Blacklist",
 					"Multiplier",
 					&blacklist_multiplier))
diff --git a/src/blacklist.h b/src/blacklist.h
index 6ce26aba..ec4c6de3 100644
--- a/src/blacklist.h
+++ b/src/blacklist.h
@@ -33,6 +33,13 @@ enum blacklist_reason {
 	 * appropriate (after a connection/disconnection)
 	 */
 	BLACKLIST_REASON_TEMPORARY,
+	/*
+	 * This type of blacklist is added when a BSS requests IWD roams
+	 * elsewhere. This is to aid in preventing IWD from roaming/connecting
+	 * back to that BSS in the future unless there are no other "good"
+	 * candidates to connect to.
+	 */
+	BLACKLIST_REASON_ROAM_REQUESTED,
 };
 
 void blacklist_add_bss(const uint8_t *addr, enum blacklist_reason reason);
-- 
2.34.1