Re: [PATCH 06/15] vendor_quirks: add two new vendor quirks

[James Prestwood <prestwoj@gmail.com>]

Hi Marcel,

On 8/23/25 7:46 AM, Marcel Holtmann wrote:
> Hi James,
>
>> VENDOR_QUIRK_BAD_BSS_TM_CANDIDATE_LIST:
>>   When a BSS requests a station roam it can optionally include a
>>   list of BSS's that can be roamed to. IWD uses this list and only
>>   scans on those frequencies. In some cases though the AP's list
>>   contains very poor options and it would be better for IWD to
>>   request a full neighbor report.
>>
>> VENDOR_QUIRK_REPLAY_COUNTER_MISMATCH:
>>   On some Aruba APs there is a mismatch in the replay counters
>>   between what is seen in scans versus authentications/associations.
>>   This difference is not allowed in the spec, therefore IWD will
>>   not connect. This quirk is intended to relax that check.
>> ---
>> src/vendor_quirks.c |  5 ++++-
>> src/vendor_quirks.h | 15 +++++++++++++++
>> 2 files changed, 19 insertions(+), 1 deletion(-)
>>
>> diff --git a/src/vendor_quirks.c b/src/vendor_quirks.c
>> index ccfcb444..e005ba3b 100644
>> --- a/src/vendor_quirks.c
>> +++ b/src/vendor_quirks.c
>> @@ -34,7 +34,10 @@ static const struct {
>> uint8_t oui[3];
>> uint32_t quirks;
>> } quirk_db[] = {
>> - { }
>> + /* Cisco Meraki */
>> + { { 0x00, 0x18, 0x0a }, VENDOR_QUIRK_BAD_BSS_TM_CANDIDATE_LIST },
>> + /* Hewlitt Packard, owns Aruba */
>> + { { 0x00, 0x0b, 0x86 }, VENDOR_QUIRK_REPLAY_COUNTER_MISMATCH },
>> };
> are you sure the name is Hewlitt ;)
Whoops, will fix in v2
>
> Regards
>
> Marcel
>