From: Kumar Amit Mehta <gmate.amit@gmail.com>
To: sony.chacko@qlogic.com
Cc: rajesh.borundia@qlogic.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: [PATCH] drivers: ethernet: qlogic: netxen_nic_ethtool.c: Fixed a coding style issue
Date: Mon, 05 Nov 2012 05:46:08 +0000 [thread overview]
Message-ID: <1352094368-5037-1-git-send-email-gmate.amit@gmail.com> (raw)
Fixed some coding style issues.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
---
.../ethernet/qlogic/netxen/netxen_nic_ethtool.c | 86 ++++++++++----------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
index 6bf73e1..4ca2c19 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
@@ -218,7 +218,7 @@ skip:
check_sfp_module = netif_running(dev) &&
adapter->has_link_events;
} else {
- ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
+ ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
ecmd->advertising | (ADVERTISED_TP | ADVERTISED_Autoneg);
ecmd->port = PORT_TP;
@@ -381,7 +381,7 @@ static u32 netxen_nic_test_link(struct net_device *dev)
static int
netxen_nic_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
- u8 * bytes)
+ u8 *bytes)
{
struct netxen_adapter *adapter = netdev_priv(dev);
int offset;
@@ -498,19 +498,19 @@ netxen_nic_get_pauseparam(struct net_device *dev,
pause->rx_pause = netxen_gb_get_rx_flowctl(val);
val = NXRD32(adapter, NETXEN_NIU_GB_PAUSE_CTL);
switch (port) {
- case 0:
- pause->tx_pause = !(netxen_gb_get_gb0_mask(val));
- break;
- case 1:
- pause->tx_pause = !(netxen_gb_get_gb1_mask(val));
- break;
- case 2:
- pause->tx_pause = !(netxen_gb_get_gb2_mask(val));
- break;
- case 3:
- default:
- pause->tx_pause = !(netxen_gb_get_gb3_mask(val));
- break;
+ case 0:
+ pause->tx_pause = !(netxen_gb_get_gb0_mask(val));
+ break;
+ case 1:
+ pause->tx_pause = !(netxen_gb_get_gb1_mask(val));
+ break;
+ case 2:
+ pause->tx_pause = !(netxen_gb_get_gb2_mask(val));
+ break;
+ case 3:
+ default:
+ pause->tx_pause = !(netxen_gb_get_gb3_mask(val));
+ break;
}
} else if (adapter->ahw.port_type = NETXEN_NIC_XGBE) {
if ((port < 0) || (port >= NETXEN_NIU_MAX_XG_PORTS))
@@ -556,31 +556,31 @@ netxen_nic_set_pauseparam(struct net_device *dev,
/* set autoneg */
val = NXRD32(adapter, NETXEN_NIU_GB_PAUSE_CTL);
switch (port) {
- case 0:
- if (pause->tx_pause)
- netxen_gb_unset_gb0_mask(val);
- else
- netxen_gb_set_gb0_mask(val);
- break;
- case 1:
- if (pause->tx_pause)
- netxen_gb_unset_gb1_mask(val);
- else
- netxen_gb_set_gb1_mask(val);
- break;
- case 2:
- if (pause->tx_pause)
- netxen_gb_unset_gb2_mask(val);
- else
- netxen_gb_set_gb2_mask(val);
- break;
- case 3:
- default:
- if (pause->tx_pause)
- netxen_gb_unset_gb3_mask(val);
- else
- netxen_gb_set_gb3_mask(val);
- break;
+ case 0:
+ if (pause->tx_pause)
+ netxen_gb_unset_gb0_mask(val);
+ else
+ netxen_gb_set_gb0_mask(val);
+ break;
+ case 1:
+ if (pause->tx_pause)
+ netxen_gb_unset_gb1_mask(val);
+ else
+ netxen_gb_set_gb1_mask(val);
+ break;
+ case 2:
+ if (pause->tx_pause)
+ netxen_gb_unset_gb2_mask(val);
+ else
+ netxen_gb_set_gb2_mask(val);
+ break;
+ case 3:
+ default:
+ if (pause->tx_pause)
+ netxen_gb_unset_gb3_mask(val);
+ else
+ netxen_gb_set_gb3_mask(val);
+ break;
}
NXWR32(adapter, NETXEN_NIU_GB_PAUSE_CTL, val);
} else if (adapter->ahw.port_type = NETXEN_NIC_XGBE) {
@@ -643,7 +643,7 @@ static int netxen_get_sset_count(struct net_device *dev, int sset)
static void
netxen_nic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
- u64 * data)
+ u64 *data)
{
memset(data, 0, sizeof(uint64_t) * NETXEN_NIC_TEST_LEN);
if ((data[0] = netxen_nic_reg_test(dev)))
@@ -654,7 +654,7 @@ netxen_nic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
}
static void
-netxen_nic_get_strings(struct net_device *dev, u32 stringset, u8 * data)
+netxen_nic_get_strings(struct net_device *dev, u32 stringset, u8 *data)
{
int index;
@@ -675,7 +675,7 @@ netxen_nic_get_strings(struct net_device *dev, u32 stringset, u8 * data)
static void
netxen_nic_get_ethtool_stats(struct net_device *dev,
- struct ethtool_stats *stats, u64 * data)
+ struct ethtool_stats *stats, u64 *data)
{
struct netxen_adapter *adapter = netdev_priv(dev);
int index;
--
1.7.9.5
next reply other threads:[~2012-11-05 5:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-05 5:46 Kumar Amit Mehta [this message]
2012-11-05 17:24 ` [PATCH] drivers: ethernet: qlogic: netxen_nic_ethtool.c: Fixed a coding style issue Rajesh Borundia
2012-11-06 23:33 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352094368-5037-1-git-send-email-gmate.amit@gmail.com \
--to=gmate.amit@gmail.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rajesh.borundia@qlogic.com \
--cc=sony.chacko@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox