public inbox for kernel-janitors@vger.kernel.org
 help / color / mirror / Atom feed
* [patch] radeon: handle errors in radeon_hwmon_init()
@ 2010-08-07 22:20 Dan Carpenter
  2010-08-07 22:25 ` Rafał Miłecki
  0 siblings, 1 reply; 4+ messages in thread
From: Dan Carpenter @ 2010-08-07 22:20 UTC (permalink / raw)
  To: David Airlie; +Cc: kernel-janitors, dri-devel, Dave Airlie, Matthew Garrett

Smatch complained that the ERR_PTR from hwmon_device_register() wasn't
handled.  I added some error handling in radeon_hwmon_init() to silence
the warning.

Unfortunately errors from radeon_pm_init() aren't handled so this
doesn't really make a difference beyond silencing the warning.

Signed-off-by: Dan Carpenter <error27@gmail.com>

diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 95f8b3a..965e0f1 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -472,9 +472,9 @@ static const struct attribute_group hwmon_attrgroup = {
 	.attrs = hwmon_attributes,
 };
 
-static void radeon_hwmon_init(struct radeon_device *rdev)
+static int radeon_hwmon_init(struct radeon_device *rdev)
 {
-	int err;
+	int err = 0;
 
 	rdev->pm.int_hwmon_dev = NULL;
 
@@ -483,15 +483,24 @@ static void radeon_hwmon_init(struct radeon_device *rdev)
 	case THERMAL_TYPE_RV770:
 	case THERMAL_TYPE_EVERGREEN:
 		rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev);
+		if (IS_ERR(rdev->pm.int_hwmon_dev)) {
+			err = PTR_ERR(rdev->pm.int_hwmon_dev);
+			DRM_ERROR("Unable to register hwmon device: %d\n", err);
+			break;
+		}
 		dev_set_drvdata(rdev->pm.int_hwmon_dev, rdev->ddev);
 		err = sysfs_create_group(&rdev->pm.int_hwmon_dev->kobj,
 					 &hwmon_attrgroup);
-		if (err)
+		if (err) {
 			DRM_ERROR("Unable to create hwmon sysfs file: %d\n", err);
+			hwmon_device_unregister(rdev->dev);
+		}
 		break;
 	default:
 		break;
 	}
+
+	return err;
 }
 
 static void radeon_hwmon_fini(struct radeon_device *rdev)
@@ -540,6 +549,7 @@ void radeon_pm_resume(struct radeon_device *rdev)
 int radeon_pm_init(struct radeon_device *rdev)
 {
 	int ret;
+
 	/* default to profile method */
 	rdev->pm.pm_method = PM_METHOD_PROFILE;
 	rdev->pm.profile = PM_PROFILE_DEFAULT;
@@ -561,7 +571,9 @@ int radeon_pm_init(struct radeon_device *rdev)
 	}
 
 	/* set up the internal thermal sensor if applicable */
-	radeon_hwmon_init(rdev);
+	ret = radeon_hwmon_init(rdev);
+	if (ret)
+		return ret;
 	if (rdev->pm.num_power_states > 1) {
 		/* where's the best place to put these? */
 		ret = device_create_file(rdev->dev, &dev_attr_power_profile);

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [patch] radeon: handle errors in radeon_hwmon_init()
  2010-08-07 22:20 [patch] radeon: handle errors in radeon_hwmon_init() Dan Carpenter
@ 2010-08-07 22:25 ` Rafał Miłecki
  2010-08-09 15:51   ` Alex Deucher
  2010-08-09 19:59   ` [patch v2] " Dan Carpenter
  0 siblings, 2 replies; 4+ messages in thread
From: Rafał Miłecki @ 2010-08-07 22:25 UTC (permalink / raw)
  To: Dan Carpenter; +Cc: kernel-janitors, dri-devel, Dave Airlie, Matthew Garrett

2010/8/8 Dan Carpenter <error27@gmail.com>:
> Smatch complained that the ERR_PTR from hwmon_device_register() wasn't
> handled.  I added some error handling in radeon_hwmon_init() to silence
> the warning.
>
> Unfortunately errors from radeon_pm_init() aren't handled so this
> doesn't really make a difference beyond silencing the warning.
>
> Signed-off-by: Dan Carpenter <error27@gmail.com>

Didn't we try to switch from DRM_ERROR to dev_err? I think that's
preferred method.

-- 
Rafał

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [patch] radeon: handle errors in radeon_hwmon_init()
  2010-08-07 22:25 ` Rafał Miłecki
@ 2010-08-09 15:51   ` Alex Deucher
  2010-08-09 19:59   ` [patch v2] " Dan Carpenter
  1 sibling, 0 replies; 4+ messages in thread
From: Alex Deucher @ 2010-08-09 15:51 UTC (permalink / raw)
  To: Rafał Miłecki
  Cc: Dan Carpenter, kernel-janitors, dri-devel, Dave Airlie,
	Matthew Garrett

2010/8/7 Rafał Miłecki <zajec5@gmail.com>:
> 2010/8/8 Dan Carpenter <error27@gmail.com>:
>> Smatch complained that the ERR_PTR from hwmon_device_register() wasn't
>> handled.  I added some error handling in radeon_hwmon_init() to silence
>> the warning.
>>
>> Unfortunately errors from radeon_pm_init() aren't handled so this
>> doesn't really make a difference beyond silencing the warning.
>>
>> Signed-off-by: Dan Carpenter <error27@gmail.com>
>
> Didn't we try to switch from DRM_ERROR to dev_err? I think that's
> preferred method.

Other than that, the patch looks fine.

Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [patch v2] radeon: handle errors in radeon_hwmon_init()
  2010-08-07 22:25 ` Rafał Miłecki
  2010-08-09 15:51   ` Alex Deucher
@ 2010-08-09 19:59   ` Dan Carpenter
  1 sibling, 0 replies; 4+ messages in thread
From: Dan Carpenter @ 2010-08-09 19:59 UTC (permalink / raw)
  To: Rafał Miłecki
  Cc: kernel-janitors, dri-devel, Dave Airlie, Matthew Garrett

Smatch complained that the ERR_PTR from hwmon_device_register() wasn't
handled.  I added some error handling in radeon_hwmon_init() to silence
the warning.

Unfortunately errors from radeon_pm_init() aren't handled so this
doesn't really make a difference beyond silencing the warning.

Also I changed DRM_ERROR() to dev_err() which is the new preferred
method.

Signed-off-by: Dan Carpenter <error27@gmail.com>
---
V2:  switched from DRM_ERROR() to dev_err()

diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 95f8b3a..58038f5 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -472,9 +472,9 @@ static const struct attribute_group hwmon_attrgroup = {
 	.attrs = hwmon_attributes,
 };
 
-static void radeon_hwmon_init(struct radeon_device *rdev)
+static int radeon_hwmon_init(struct radeon_device *rdev)
 {
-	int err;
+	int err = 0;
 
 	rdev->pm.int_hwmon_dev = NULL;
 
@@ -483,15 +483,26 @@ static void radeon_hwmon_init(struct radeon_device *rdev)
 	case THERMAL_TYPE_RV770:
 	case THERMAL_TYPE_EVERGREEN:
 		rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev);
+		if (IS_ERR(rdev->pm.int_hwmon_dev)) {
+			err = PTR_ERR(rdev->pm.int_hwmon_dev);
+			dev_err(rdev->dev,
+				"Unable to register hwmon device: %d\n", err);
+			break;
+		}
 		dev_set_drvdata(rdev->pm.int_hwmon_dev, rdev->ddev);
 		err = sysfs_create_group(&rdev->pm.int_hwmon_dev->kobj,
 					 &hwmon_attrgroup);
-		if (err)
-			DRM_ERROR("Unable to create hwmon sysfs file: %d\n", err);
+		if (err) {
+			dev_err(rdev->dev,
+				"Unable to create hwmon sysfs file: %d\n", err);
+			hwmon_device_unregister(rdev->dev);
+		}
 		break;
 	default:
 		break;
 	}
+
+	return err;
 }
 
 static void radeon_hwmon_fini(struct radeon_device *rdev)
@@ -540,6 +551,7 @@ void radeon_pm_resume(struct radeon_device *rdev)
 int radeon_pm_init(struct radeon_device *rdev)
 {
 	int ret;
+
 	/* default to profile method */
 	rdev->pm.pm_method = PM_METHOD_PROFILE;
 	rdev->pm.profile = PM_PROFILE_DEFAULT;
@@ -561,7 +573,9 @@ int radeon_pm_init(struct radeon_device *rdev)
 	}
 
 	/* set up the internal thermal sensor if applicable */
-	radeon_hwmon_init(rdev);
+	ret = radeon_hwmon_init(rdev);
+	if (ret)
+		return ret;
 	if (rdev->pm.num_power_states > 1) {
 		/* where's the best place to put these? */
 		ret = device_create_file(rdev->dev, &dev_attr_power_profile);
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2010-08-09 19:59 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-07 22:20 [patch] radeon: handle errors in radeon_hwmon_init() Dan Carpenter
2010-08-07 22:25 ` Rafał Miłecki
2010-08-09 15:51   ` Alex Deucher
2010-08-09 19:59   ` [patch v2] " Dan Carpenter

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox