From: Dan Carpenter <dan.carpenter@oracle.com>
To: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>,
Alexey Khoroshilov <khoroshilov@ispras.ru>,
linux-media@vger.kernel.org,
Manu Abraham <abraham.manu@gmail.com>,
kernel-janitors@vger.kernel.org
Subject: [patch v2] [media] stv090x: remove indent levels in stv090x_get_coldlock()
Date: Fri, 21 Feb 2014 08:50:01 +0000 [thread overview]
Message-ID: <20140221085001.GA13078@elgon.mountain> (raw)
In-Reply-To: <5305D7D5.8080906@xs4all.nl>
This code is needlessly complicated and checkpatch.pl complains that we
go over the 80 characters per line limit.
If we flip the "if (!lock) {" test to "if (lock) return;" then we can
remove an indent level from the rest of the function.
We can add two returns in the "if (state->srate >= 10000000) {"
condition and move the else statement back an additional indent level.
There is another "if (!lock) {" check which can be removed since we have
already checked "lock" and know it is zero at this point. This second
check on "lock" is also a problem because it sets off a static checker
warning. I have reviewed this code for some time to see if something
else was intended, but have concluded that it was simply an oversight
and should be removed. Removing this duplicative check gains us an
third indent level.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
v2: add the returns in the "if (state->srate >= 10000000) {" condition.
diff --git a/drivers/media/dvb-frontends/stv090x.c b/drivers/media/dvb-frontends/stv090x.c
index 23e872f84742..93f4979ea6e9 100644
--- a/drivers/media/dvb-frontends/stv090x.c
+++ b/drivers/media/dvb-frontends/stv090x.c
@@ -2146,7 +2146,7 @@ static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
u32 reg;
s32 car_step, steps, cur_step, dir, freq, timeout_lock;
- int lock = 0;
+ int lock;
if (state->srate >= 10000000)
timeout_lock = timeout_dmd / 3;
@@ -2154,98 +2154,96 @@ static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
timeout_lock = timeout_dmd / 2;
lock = stv090x_get_dmdlock(state, timeout_lock); /* cold start wait */
- if (!lock) {
- if (state->srate >= 10000000) {
- if (stv090x_chk_tmg(state)) {
- if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
- goto err;
- if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
- goto err;
- lock = stv090x_get_dmdlock(state, timeout_dmd);
- } else {
- lock = 0;
- }
- } else {
- if (state->srate <= 4000000)
- car_step = 1000;
- else if (state->srate <= 7000000)
- car_step = 2000;
- else if (state->srate <= 10000000)
- car_step = 3000;
- else
- car_step = 5000;
-
- steps = (state->search_range / 1000) / car_step;
- steps /= 2;
- steps = 2 * (steps + 1);
- if (steps < 0)
- steps = 2;
- else if (steps > 12)
- steps = 12;
-
- cur_step = 1;
- dir = 1;
-
- if (!lock) {
- freq = state->frequency;
- state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
- while ((cur_step <= steps) && (!lock)) {
- if (dir > 0)
- freq += cur_step * car_step;
- else
- freq -= cur_step * car_step;
-
- /* Setup tuner */
- if (stv090x_i2c_gate_ctrl(state, 1) < 0)
- goto err;
+ if (lock)
+ return lock;
- if (state->config->tuner_set_frequency) {
- if (state->config->tuner_set_frequency(fe, freq) < 0)
- goto err_gateoff;
- }
+ if (state->srate >= 10000000) {
+ if (stv090x_chk_tmg(state)) {
+ if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
+ goto err;
+ return stv090x_get_dmdlock(state, timeout_dmd);
+ }
+ return 0;
+ }
- if (state->config->tuner_set_bandwidth) {
- if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
- goto err_gateoff;
- }
+ if (state->srate <= 4000000)
+ car_step = 1000;
+ else if (state->srate <= 7000000)
+ car_step = 2000;
+ else if (state->srate <= 10000000)
+ car_step = 3000;
+ else
+ car_step = 5000;
- if (stv090x_i2c_gate_ctrl(state, 0) < 0)
- goto err;
+ steps = (state->search_range / 1000) / car_step;
+ steps /= 2;
+ steps = 2 * (steps + 1);
+ if (steps < 0)
+ steps = 2;
+ else if (steps > 12)
+ steps = 12;
- msleep(50);
+ cur_step = 1;
+ dir = 1;
- if (stv090x_i2c_gate_ctrl(state, 1) < 0)
- goto err;
+ freq = state->frequency;
+ state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
+ while ((cur_step <= steps) && (!lock)) {
+ if (dir > 0)
+ freq += cur_step * car_step;
+ else
+ freq -= cur_step * car_step;
- if (state->config->tuner_get_status) {
- if (state->config->tuner_get_status(fe, ®) < 0)
- goto err_gateoff;
- }
+ /* Setup tuner */
+ if (stv090x_i2c_gate_ctrl(state, 1) < 0)
+ goto err;
- if (reg)
- dprintk(FE_DEBUG, 1, "Tuner phase locked");
- else
- dprintk(FE_DEBUG, 1, "Tuner unlocked");
+ if (state->config->tuner_set_frequency) {
+ if (state->config->tuner_set_frequency(fe, freq) < 0)
+ goto err_gateoff;
+ }
- if (stv090x_i2c_gate_ctrl(state, 0) < 0)
- goto err;
+ if (state->config->tuner_set_bandwidth) {
+ if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
+ goto err_gateoff;
+ }
- STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
- if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
- goto err;
- if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
- goto err;
- if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
- goto err;
- if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
- goto err;
- lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
+ if (stv090x_i2c_gate_ctrl(state, 0) < 0)
+ goto err;
- dir *= -1;
- cur_step++;
- }
- }
+ msleep(50);
+
+ if (stv090x_i2c_gate_ctrl(state, 1) < 0)
+ goto err;
+
+ if (state->config->tuner_get_status) {
+ if (state->config->tuner_get_status(fe, ®) < 0)
+ goto err_gateoff;
}
+
+ if (reg)
+ dprintk(FE_DEBUG, 1, "Tuner phase locked");
+ else
+ dprintk(FE_DEBUG, 1, "Tuner unlocked");
+
+ if (stv090x_i2c_gate_ctrl(state, 0) < 0)
+ goto err;
+
+ STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
+ if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
+ goto err;
+ lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
+
+ dir *= -1;
+ cur_step++;
}
return lock;
next prev parent reply other threads:[~2014-02-21 8:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-06 9:28 [patch] [media] stv090x: remove indent levels Dan Carpenter
2014-02-18 3:55 ` Manu Abraham
2014-02-18 8:56 ` Dan Carpenter
2014-02-19 5:34 ` Manu Abraham
2014-02-19 7:44 ` Dan Carpenter
2014-02-20 3:39 ` Manu Abraham
2014-02-20 9:25 ` Dan Carpenter
2014-02-20 12:57 ` Manu Abraham
2014-02-20 10:24 ` Hans Verkuil
2014-02-20 12:35 ` Dan Carpenter
2014-02-21 8:50 ` Dan Carpenter [this message]
2014-02-21 11:45 ` [patch v2] [media] stv090x: remove indent levels in stv090x_get_coldlock() walter harms
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140221085001.GA13078@elgon.mountain \
--to=dan.carpenter@oracle.com \
--cc=abraham.manu@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=khoroshilov@ispras.ru \
--cc=linux-media@vger.kernel.org \
--cc=m.chehab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).