From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Date: Sat, 03 Mar 2018 15:21:03 +0000 Subject: Re: [PATCH v2 1/2] iio: dummy: Add correct tabs and spaces to Kconfig Message-Id: <20180303152103.5b7061af@archlinux> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Rodrigo Siqueira Cc: Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , daniel.baluta@nxp.com, kernel-janitors@vger.kernel.org, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org On Tue, 27 Feb 2018 10:46:51 -0300 Rodrigo Siqueira wrote: > Kconfig from iio/dummy does not follow the coding style recommendations. > According to the coding-style, Lines under a config definition are > indented with one tab, while help text is indented an additional two > spaces. This patch adds the proper tabulation and space. > > Signed-off-by: Rodrigo Siqueira Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > drivers/iio/dummy/Kconfig | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/drivers/iio/dummy/Kconfig b/drivers/iio/dummy/Kconfig > index 5a29fbd3c531..85e13b2e35bf 100644 > --- a/drivers/iio/dummy/Kconfig > +++ b/drivers/iio/dummy/Kconfig > @@ -9,20 +9,20 @@ config IIO_DUMMY_EVGEN > tristate > > config IIO_SIMPLE_DUMMY > - tristate "An example driver with no hardware requirements" > - depends on IIO_SW_DEVICE > - help > - Driver intended mainly as documentation for how to write > - a driver. May also be useful for testing userspace code > - without hardware. > + tristate "An example driver with no hardware requirements" > + depends on IIO_SW_DEVICE > + help > + Driver intended mainly as documentation for how to write > + a driver. May also be useful for testing userspace code > + without hardware. > > if IIO_SIMPLE_DUMMY > > config IIO_SIMPLE_DUMMY_EVENTS > - bool "Event generation support" > - select IIO_DUMMY_EVGEN > - help > - Add some dummy events to the simple dummy driver. > + bool "Event generation support" > + select IIO_DUMMY_EVGEN > + help > + Add some dummy events to the simple dummy driver. > > config IIO_SIMPLE_DUMMY_BUFFER > bool "Buffered capture support"