From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jason <linuxdriverproject@lakedaemon.net>
Date: Thu, 09 Sep 2010 16:23:12 +0000
Subject: Re: Opinion about Linux Foundation courses
Message-Id: <4C8909F0.7090308@lakedaemon.net>
List-Id: <kernel-janitors.vger.kernel.org>
References: <AANLkTikugt28Lsf9wgCyOD=t4SK4pMyCNxCU5Yahs_nz@mail.gmail.com>
In-Reply-To: <AANLkTikugt28Lsf9wgCyOD=t4SK4pMyCNxCU5Yahs_nz@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: kernel-janitors@vger.kernel.org

Kevin McKinney wrote:
> On Thu, Sep 9, 2010 at 10:28 AM, Jason
> <linuxdriverproject@lakedaemon.net> wrote:
>> I've had very good luck with this [1] cable.  You can get the wire-end
>> variant, but honestly, I like the plug better.  The pins come out easily, so
>> I can reorder the pins depending on the project.
> 
> The pin layout of my TTL port is 3V3 TXD RXD GND; would this work with
> the cable you suggested; It has two extra pins?  Thanks for your help.
> 

Just pull the unneeded pins out of the plug and wrap them (independently) with electrical tape. ;-)

hth,

Jason.