[PATCH 2/3] drivers/parport/parport_pc.c: Convert release_resource to release_region/release_mem_reg

[PATCH 2/3] drivers/parport/parport_pc.c: Convert release_resource to release_region/release_mem_reg

[Julia Lawall]

Request_region should be used with release_region, not
release_resource.

base_res is also dropped because it is no longer needed.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,E;
@@
*x = request_region(...)
... when != release_region(x)
    when != x = E
* release_resource(x);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>

---
In the original code, the second argument of request_region is 32 and the
second argument of the following release_region is 0x8.  I have thus used
0x8 as the second argument of the call to release_region introduced to
replace the call to release_resource.  But shouldn't the second arguments
of all of the functions be the same?

 drivers/parport/parport_pc.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 8d62fb7..320a4df 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2550,7 +2550,6 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 					 const struct parport_pc_via_data *via)
 {
 	short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
-	struct resource *base_res;
 	u32 ite8872set;
 	u32 ite8872_lpt, ite8872_lpthi;
 	u8 ite8872_irq, type;
@@ -2561,8 +2560,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 
 	/* make sure which one chip */
 	for (i = 0; i < 5; i++) {
-		base_res = request_region(inta_addr[i], 32, "it887x");
-		if (base_res) {
+		if (request_region(inta_addr[i], 32, "it887x")) {
 			int test;
 			pci_write_config_dword(pdev, 0x60,
 						0xe5000000 | inta_addr[i]);
@@ -2635,7 +2633,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 	/*
 	 * Release the resource so that parport_pc_probe_port can get it.
 	 */
-	release_resource(base_res);
+	release_region(inta_addr[i], 0x8);
 	if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
 				   irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
 		printk(KERN_INFO

Re: [PATCH 2/3] drivers/parport/parport_pc.c: Convert release_resource

[Niels de Vos]

On 03/22/2011 05:15 PM, Julia Lawall wrote:
> Request_region should be used with release_region, not
> release_resource.
> 
> base_res is also dropped because it is no longer needed.
> 
> The semantic match that finds this problem is as follows:
> (http://coccinelle.lip6.fr/)
> 
> // <smpl>
> @@
> expression x,E;
> @@
> *x = request_region(...)
> ... when != release_region(x)
>     when != x = E
> * release_resource(x);
> // </smpl>
> 
> Signed-off-by: Julia Lawall <julia@diku.dk>
> 
> ---
> In the original code, the second argument of request_region is 32 and the
> second argument of the following release_region is 0x8.  I have thus used
> 0x8 as the second argument of the call to release_region introduced to
> replace the call to release_resource.  But shouldn't the second arguments
> of all of the functions be the same?

Yes, they should. The size of the requested region was changed with
commit e7c310c36e5fdf1b83a459e5db167bfbd86137db, but one occurrence of
release_region() was not changed accordingly.


>  drivers/parport/parport_pc.c |    6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
> index 8d62fb7..320a4df 100644
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2550,7 +2550,6 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
>  					 const struct parport_pc_via_data *via)
>  {
>  	short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
> -	struct resource *base_res;
>  	u32 ite8872set;
>  	u32 ite8872_lpt, ite8872_lpthi;
>  	u8 ite8872_irq, type;
> @@ -2561,8 +2560,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
>  
>  	/* make sure which one chip */
>  	for (i = 0; i < 5; i++) {
> -		base_res = request_region(inta_addr[i], 32, "it887x");
> -		if (base_res) {
> +		if (request_region(inta_addr[i], 32, "it887x")) {
>  			int test;
>  			pci_write_config_dword(pdev, 0x60,
>  						0xe5000000 | inta_addr[i]);
> @@ -2635,7 +2633,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
>  	/*
>  	 * Release the resource so that parport_pc_probe_port can get it.
>  	 */
> -	release_resource(base_res);
> +	release_region(inta_addr[i], 0x8);

0x8 is not the correct size, this should be 32. As there is an other
occurance already, I'll post an updated patch in a bit.

>  	if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
>  				   irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
>  		printk(KERN_INFO
> 

-- 
Niels de Vos, RHCE
Senior Technical Support Engineer
Global Support Services
Red Hat UK, Ltd.