From: Julia Lawall <julia.lawall@lip6.fr>
To: Kumar Gaurav <kumargauravgupta3@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>,
t.sailer@alumni.ethz.ch, jreuter@yaina.de, jpr@f6fbb.org,
linux-hams@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [PATCH] drivers:net:hamradio: Removing Depricated IRQF_DISABLED
Date: Sat, 10 Aug 2013 17:24:45 +0000 [thread overview]
Message-ID: <alpine.DEB.2.02.1308101923130.2076@localhost6.localdomain6> (raw)
In-Reply-To: <5206720C.4060405@gmail.com>
On Sat, 10 Aug 2013, Kumar Gaurav wrote:
> On Saturday 10 August 2013 10:17 PM, Julia Lawall wrote:
> > If it is in a | with something else, I think you can just remove it.
> >
> > julia
> >
> > On Sat, 10 Aug 2013, Kumar Gaurav wrote:
> >
> > > Removed IRQF_DISABLED as it's deprecated and should be removed
> > >
> > > Signed-off-by: Kumar Gaurav <kumargauravgupta3@gmail.com>
> > > ---
> > > drivers/net/hamradio/baycom_ser_fdx.c | 2 +-
> > > drivers/net/hamradio/baycom_ser_hdx.c | 2 +-
> > > drivers/net/hamradio/scc.c | 2 +-
> > > drivers/net/hamradio/yam.c | 2 +-
> > > 4 files changed, 4 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/net/hamradio/baycom_ser_fdx.c
> > > b/drivers/net/hamradio/baycom_ser_fdx.c
> > > index a974727..c114009 100644
> > > --- a/drivers/net/hamradio/baycom_ser_fdx.c
> > > +++ b/drivers/net/hamradio/baycom_ser_fdx.c
> > > @@ -445,7 +445,7 @@ static int ser12_open(struct net_device *dev)
> > > outb(0, FCR(dev->base_addr)); /* disable FIFOs */
> > > outb(0x0d, MCR(dev->base_addr));
> > > outb(0, IER(dev->base_addr));
> > > - if (request_irq(dev->irq, ser12_interrupt, IRQF_DISABLED |
> > > IRQF_SHARED,
> > > + if (request_irq(dev->irq, ser12_interrupt, IRQF_TRIGGER_NONE |
> > > IRQF_SHARED,
> > > "baycom_ser_fdx", dev)) {
> > > release_region(dev->base_addr, SER12_EXTENT);
> > > return -EBUSY;
> > > diff --git a/drivers/net/hamradio/baycom_ser_hdx.c
> > > b/drivers/net/hamradio/baycom_ser_hdx.c
> > > index e349d86..d91c1fd 100644
> > > --- a/drivers/net/hamradio/baycom_ser_hdx.c
> > > +++ b/drivers/net/hamradio/baycom_ser_hdx.c
> > > @@ -490,7 +490,7 @@ static int ser12_open(struct net_device *dev)
> > > outb(0, FCR(dev->base_addr)); /* disable FIFOs */
> > > outb(0x0d, MCR(dev->base_addr));
> > > outb(0, IER(dev->base_addr));
> > > - if (request_irq(dev->irq, ser12_interrupt, IRQF_DISABLED |
> > > IRQF_SHARED,
> > > + if (request_irq(dev->irq, ser12_interrupt, IRQF_TRIGGER_NONE |
> > > IRQF_SHARED,
> > > "baycom_ser12", dev)) {
> > > release_region(dev->base_addr, SER12_EXTENT);
> > > return -EBUSY;
> > > diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
> > > index bc1d521..4bc6ee8 100644
> > > --- a/drivers/net/hamradio/scc.c
> > > +++ b/drivers/net/hamradio/scc.c
> > > @@ -1734,7 +1734,7 @@ static int scc_net_ioctl(struct net_device *dev,
> > > struct ifreq *ifr, int cmd)
> > > if (!Ivec[hwcfg.irq].used && hwcfg.irq)
> > > {
> > > if (request_irq(hwcfg.irq, scc_isr,
> > > - IRQF_DISABLED, "AX.25 SCC",
> > > + 0, "AX.25 SCC",
> > > (void *)(long) hwcfg.irq))
> > > printk(KERN_WARNING "z8530drv:
> > > warning, cannot get IRQ %d\n", hwcfg.irq);
> > > else
> > > diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
> > > index 0721e72..f947887 100644
> > > --- a/drivers/net/hamradio/yam.c
> > > +++ b/drivers/net/hamradio/yam.c
> > > @@ -888,7 +888,7 @@ static int yam_open(struct net_device *dev)
> > > goto out_release_base;
> > > }
> > > outb(0, IER(dev->base_addr));
> > > - if (request_irq(dev->irq, yam_interrupt, IRQF_DISABLED | IRQF_SHARED,
> > > dev->name, dev)) {
> > > + if (request_irq(dev->irq, yam_interrupt, IRQF_TRIGGER_NONE |
> > > IRQF_SHARED, dev->name, dev)) {
> > > printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
> > > ret = -EBUSY;
> > > goto out_release_base;
> > > --
> > > 1.7.9.5
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe kernel-janitors"
> > > in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > >
> Yes i was suggested for using IRQF_TRIGGER_NONE too so used this. Please tell
> me if this makes any difference or issue?
I think that the suggestion was to use IRQF_TRIGGER_NONE only when
removing IRQF_DISABLED would leave nothing left.
- IRQF_DISABLED | e
+ e
otherwise,
- IRQF_DISABLED
+ 0
julia
next prev parent reply other threads:[~2013-08-10 17:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-10 16:50 [PATCH] drivers:net:hamradio: Removing Depricated IRQF_DISABLED Kumar Gaurav
2013-08-10 16:47 ` Julia Lawall
2013-08-10 17:14 ` Kumar Gaurav
2013-08-10 17:24 ` Julia Lawall [this message]
2013-08-10 18:27 ` Kumar Gaurav
2013-08-10 18:42 ` Julia Lawall
2013-08-10 18:49 ` walter harms
2013-08-10 18:53 ` Kumar Gaurav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1308101923130.2076@localhost6.localdomain6 \
--to=julia.lawall@lip6.fr \
--cc=jpr@f6fbb.org \
--cc=jreuter@yaina.de \
--cc=kernel-janitors@vger.kernel.org \
--cc=kumargauravgupta3@gmail.com \
--cc=linux-hams@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=t.sailer@alumni.ethz.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox