public inbox for kernel-janitors@vger.kernel.org
 help / color / mirror / Atom feed
From: SF Markus Elfring <elfring@users.sourceforge.net>
To: alsa-devel@alsa-project.org, Bhumika Goyal <bhumirks@gmail.com>,
	David Howells <dhowells@redhat.com>,
	Ingo Molnar <mingo@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>
Cc: kernel-janitors@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/3] ALSA: ymfpci: Use common error handling code in snd_card_ymfpci_probe()
Date: Wed, 06 Sep 2017 19:46:52 +0000	[thread overview]
Message-ID: <c3b3d66c-1fb1-8bb9-cf00-674fd4e20afb@users.sourceforge.net> (raw)
In-Reply-To: <dafe6d86-1bfd-41a8-e189-bde7ae30dea9@users.sourceforge.net>

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 6 Sep 2017 20:45:11 +0200

* Add a jump target so that a bit of exception handling can be better
  reused at the end of this function.

  This issue was detected by using the Coccinelle software.

* The script "checkpatch.pl" pointed information out like the following.

  ERROR: do not use assignment in if condition

  Thus fix a few source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 sound/pci/ymfpci/ymfpci.c | 62 +++++++++++++++++++++++------------------------
 1 file changed, 30 insertions(+), 32 deletions(-)

diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 4faf3e1ed06a..eafdee384059 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -268,10 +268,9 @@ static int snd_card_ymfpci_probe(struct pci_dev *pci,
 	if ((err = snd_ymfpci_create(card, pci,
 				     old_legacy_ctrl,
 			 	     &chip)) < 0) {
-		snd_card_free(card);
 		release_and_free_resource(mpu_res);
 		release_and_free_resource(fm_res);
-		return err;
+		goto free_card;
 	}
 	chip->fm_res = fm_res;
 	chip->mpu_res = mpu_res;
@@ -283,35 +282,31 @@ static int snd_card_ymfpci_probe(struct pci_dev *pci,
 		card->shortname,
 		chip->reg_area_phys,
 		chip->irq);
-	if ((err = snd_ymfpci_pcm(chip, 0)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
-	if ((err = snd_ymfpci_pcm_spdif(chip, 1)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	err = snd_ymfpci_pcm(chip, 0);
+	if (err < 0)
+		goto free_card;
+
+	err = snd_ymfpci_pcm_spdif(chip, 1);
+	if (err < 0)
+		goto free_card;
+
 	err = snd_ymfpci_mixer(chip, rear_switch[dev]);
-	if (err < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	if (err < 0)
+		goto free_card;
+
 	if (chip->ac97->ext_id & AC97_EI_SDAC) {
 		err = snd_ymfpci_pcm_4ch(chip, 2);
-		if (err < 0) {
-			snd_card_free(card);
-			return err;
-		}
+		if (err < 0)
+			goto free_card;
+
 		err = snd_ymfpci_pcm2(chip, 3);
-		if (err < 0) {
-			snd_card_free(card);
-			return err;
-		}
-	}
-	if ((err = snd_ymfpci_timer(chip, 0)) < 0) {
-		snd_card_free(card);
-		return err;
+		if (err < 0)
+			goto free_card;
 	}
+	err = snd_ymfpci_timer(chip, 0);
+	if (err < 0)
+		goto free_card;
+
 	if (chip->mpu_res) {
 		if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_YMFPCI,
 					       mpu_port[dev],
@@ -336,21 +331,24 @@ static int snd_card_ymfpci_probe(struct pci_dev *pci,
 			legacy_ctrl &= ~YMFPCI_LEGACY_FMEN;
 			pci_write_config_word(pci, PCIR_DSXG_LEGACY, legacy_ctrl);
 		} else if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
-			snd_card_free(card);
 			dev_err(card->dev, "cannot create opl3 hwdep\n");
-			return err;
+			goto free_card;
 		}
 	}
 
 	snd_ymfpci_create_gameport(chip, dev, legacy_ctrl, legacy_ctrl2);
 
-	if ((err = snd_card_register(card)) < 0) {
-		snd_card_free(card);
-		return err;
-	}
+	err = snd_card_register(card);
+	if (err < 0)
+		goto free_card;
+
 	pci_set_drvdata(pci, card);
 	dev++;
 	return 0;
+
+free_card:
+	snd_card_free(card);
+	return err;
 }
 
 static void snd_card_ymfpci_remove(struct pci_dev *pci)
-- 
2.14.1


  reply	other threads:[~2017-09-06 19:46 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-06 19:45 [PATCH 0/3] ALSA: ymfpci: Fine-tuning for some function implementations SF Markus Elfring
2017-09-06 19:46 ` SF Markus Elfring [this message]
2017-09-06 21:51   ` [PATCH 1/3] ALSA: ymfpci: Use common error handling code in snd_card_ymfpci_probe() Dan Carpenter
2017-09-07  7:41     ` SF Markus Elfring
2017-09-07  8:09       ` Takashi Iwai
2017-09-07  8:35   ` Takashi Iwai
2017-09-06 19:48 ` [PATCH 2/3] ALSA: ymfpci: Use common error handling code in snd_ymfpci_create() SF Markus Elfring
2017-09-07  8:35   ` Takashi Iwai
2017-09-06 19:50 ` [PATCH 3/3] ALSA: ymfpci: Adjust 17 checks for null pointers SF Markus Elfring
2017-09-07  8:35   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c3b3d66c-1fb1-8bb9-cf00-674fd4e20afb@users.sourceforge.net \
    --to=elfring@users.sourceforge.net \
    --cc=alsa-devel@alsa-project.org \
    --cc=bhumirks@gmail.com \
    --cc=dhowells@redhat.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox