* 2.6.26-rc9: Reported regressions from 2.6.25
@ 2008-07-06 11:39 Rafael J. Wysocki
2008-07-06 11:39 ` [Bug #10493] mips BCM47XX compile error Rafael J. Wysocki
` (41 more replies)
0 siblings, 42 replies; 109+ messages in thread
From: Rafael J. Wysocki @ 2008-07-06 11:39 UTC (permalink / raw)
To: Linux Kernel Mailing List
Cc: Adrian Bunk, Andrew Morton, Linus Torvalds, Natalie Protasevich,
Kernel Testers List
This message contains a list of some regressions from 2.6.25, for which there
are no fixes in the mainline I know of. If any of them have been fixed already,
please let me know.
If you know of any other unresolved regressions from 2.6.25, please let me know
either and I'll add them to the list. Also, please let me know if any of the
entries below are invalid.
Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.
Listed regressions statistics:
Date Total Pending Unresolved
----------------------------------------
2008-07-06 166 38 26
2008-06-29 158 43 31
2008-06-22 148 39 28
2008-06-14 130 37 28
2008-06-07 125 48 33
2008-05-31 115 52 31
2008-05-24 94 47 28
2008-05-18 80 51 37
2008-05-11 53 46 34
Unresolved regressions
----------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11041
Subject : All 2.6.26-rcX hang immediately after loading ohci_hcd
Submitter : Andrey Borzenkov <arvidjaar-JGs/UdohzUI@public.gmane.org>
Date : 2008-07-05 7:08 (2 days old)
References : http://marc.info/?l=linux-kernel&m=121524504505805&w=4
Handled-By : Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11040
Subject : 2.6.26-rc: host can not shutdown: ata problem
Submitter : Alexander Beregalov <a.beregalov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-07-03 21:43 (4 days old)
References : http://marc.info/?l=linux-kernel&m=121512197225068&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11039
Subject : 2.6.28-rc8-git3 forcedeth WARNING (kills the interface)
Submitter : Brad Campbell <brad-UPaTOFvTz1K6c6uEtOJ/EA@public.gmane.org>
Date : 2008-07-03 10:07 (4 days old)
References : http://marc.info/?l=linux-netdev&m=121508714430752&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11035
Subject : System hangs on 2.6.26-rc8
Submitter : Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org>
Date : 2008-07-02 14:25 (5 days old)
References : http://marc.info/?l=linux-kernel&m=121500871414995&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11025
Subject : [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected)
Submitter : Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Date : 2008-07-01 1:57 (6 days old)
References : http://marc.info/?l=linux-kernel&m=121487749429883&w=4
Handled-By : Mel Gorman <mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org>
Andy Whitcroft <apw-26w3C0LaAnFg9hUCZPvPmw@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11023
Subject : 2.6.26-rc8-git2 - kernel BUG at mm/page_alloc.c:585
Submitter : Kamalesh Babulal <kamalesh-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Date : 2008-07-02 11:55 (5 days old)
References : http://lkml.org/lkml/2008/7/2/32
Handled-By : Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11009
Subject : No console on Riva TNT since 2.6.26-0.rc4
Submitter : Quel Qun <kelk1-Wuw85uim5zDR7s880joybQ@public.gmane.org>
Date : 2008-06-26 20:04 (11 days old)
References : http://marc.info/?l=linux-kernel&m=121451344229718&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10989
Subject : kernel oopses when wiggling the mouse to make it known to hidd
Submitter : Daniel Vetter <daniel-/w4YWyX8dFk@public.gmane.org>
Date : 2008-06-26 10:32 (11 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10985
Subject : backlight doesn't come on after resume with i915 video
Submitter : Jon Dowland <jon+bugzilla.kernel.org-DVpwQSnkAF5AfugRpC6u6w@public.gmane.org>
Date : 2008-06-26 02:09 (11 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10984
Subject : MMC print trace information when resume from suspend
Submitter : Jie Luo <clotho67-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-06-26 01:15 (11 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10971
Subject : radeonfb : radeon X800 family support (atombios)
Submitter : Jimmy.Jazz-hi6Y0CQ0nG0@public.gmane.org
Date : 2008-06-23 14:35 (14 days old)
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10960
Subject : 2.6.26-rc: SPARC: Sun Ultra 10 can not boot
Submitter : Alexander Beregalov <a.beregalov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-06-19 14:07 (18 days old)
References : http://marc.info/?l=linux-kernel&m=121388456519637&w=4
Handled-By : David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10955
Subject : v2.6.26-rc7: BUG task_struct: Poison overwritten
Submitter : Vegard Nossum <vegard.nossum-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-06-21 19:24 (16 days old)
References : http://marc.info/?l=linux-kernel&m=121407641925121&w=4
Handled-By : Peter Zijlstra <a.p.zijlstra-/NLkJaSkS4VmR6Xm/wNWPw@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10954
Subject : hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c
Submitter : Justin Mattock <justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-06-21 2:05 (16 days old)
References : http://marc.info/?l=linux-kernel&m=121401399622190&w=4
http://marc.info/?t=121416231700010&r=1&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10919
Subject : [regression] display dimming is slow and laggy - Acer Travelmate 661lci
Submitter : Maximilian Engelhardt <maxi-OwNUvPV92VfddJNmlsFzeA@public.gmane.org>
Date : 2008-06-14 22:31 (23 days old)
References : http://marc.info/?l=linux-kernel&m=121348428828320&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10906
Subject : repeatable slab corruption with LTP msgctl08
Submitter : Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Date : 2008-06-12 5:13 (25 days old)
References : http://marc.info/?l=linux-kernel&m=121324775927704&w=4
Handled-By : Pekka J Enberg <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org>
Christoph Lameter <clameter-sJ/iWh9BUns@public.gmane.org>
Manfred Spraul <manfred-nhLOkwUX5cPe2c5cEj3t2g@public.gmane.org>
Andi Kleen <andi-Vw/NltI1exuRpAAqCnN02g@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10872
Subject : x86_64 boot hang when CONFIG_NUMA=n
Submitter : Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Date : 2008-06-05 21:50 (32 days old)
References : http://marc.info/?l=linux-kernel&m=121270308607116&w=4
http://lkml.org/lkml/2008/6/11/355
http://lkml.org/lkml/2008/6/15/117
Handled-By : Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10865
Subject : Oops trying to mount an ntfs partition on thinkpad
Submitter : Alex Romosan <romosan-z2gvhuI27Wv/eO6KEJJvLQ@public.gmane.org>
Date : 2008-06-05 14:47 (32 days old)
References : http://marc.info/?l=linux-kernel&m=121267834421414&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10862
Subject : forcedeth: lockdep warning on ethtool -s
Submitter : Tobias Diedrich <ranma+kernel-YxUgxmcw2FPQD6PfKP4TzA@public.gmane.org>
Date : 2008-06-01 8:37 (36 days old)
References : http://marc.info/?l=linux-kernel&m=121230964032247&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10861
Subject : 2.6.26-rc4-git2 - long pause during boot
Submitter : Chris Clayton <chris2553-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Date : 2008-06-01 4:15 (36 days old)
References : http://marc.info/?l=linux-kernel&m=121229382917834&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10843
Subject : Display artifacts on XOrg logout with PAT kernel and VESA framebuffer
Submitter : Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org>
Date : 2008-05-31 14:04 (37 days old)
References : http://lkml.org/lkml/2008/6/7/206
http://lkml.org/lkml/2008/6/15/119
http://lkml.org/lkml/2008/6/23/160
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10821
Subject : rt25xx: lock dependency warning, association failure, and kmalloc corruption
Submitter : Christian Casteyde <casteyde.christian-GANU6spQydw@public.gmane.org>
Date : 2008-05-29 14:30 (39 days old)
Handled-By : Ivo van Doorn <IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786
Subject : parisc: 64bit SMP does not boot on J5600
Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-05-22 16:14 (46 days old)
References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10741
Subject : bug in `tty: BKL pushdown'?
Submitter : Johannes Weiner <hannes-BfM5BwqdGSkPyMaTEpOvjQ@public.gmane.org>
Date : 2008-05-18 2:16 (50 days old)
References : http://marc.info/?l=linux-kernel&m=121107706506181&w=4
http://lkml.org/lkml/2008/6/16/104
Handled-By : Alan Cox <alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10714
Subject : powerpc: Badness seen on 2.6.26-rc2 with lockdep enabled
Submitter : Balbir Singh <balbir-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Date : 2008-05-14 12:57 (54 days old)
References : http://marc.info/?l=linux-kernel&m=121076917429133&w=4
Handled-By : Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10629
Subject : 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160
Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-05-05 09:59 (63 days old)
References : http://lkml.org/lkml/2008/5/5/28
Handled-By : Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Regressions with patches
------------------------
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11042
Subject : build issue #477 for v2.6.26-rc8-290-gb8a0b6c : input_event" [drivers/media/dvb/ttpci/dvb-ttpci.ko] undefined!
Submitter : Toralf Förster <toralf.foerster-Mmb7MZpHnFY@public.gmane.org>
Date : 2008-07-05 15:25 (2 days old)
References : http://marc.info/?l=linux-kernel&m=121527158632563&w=4
Handled-By : Oliver Endriss <o.endriss-Mmb7MZpHnFY@public.gmane.org>
Patch : http://marc.info/?l=linux-kernel&m=121529790229531&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11024
Subject : 2.6.25 to 2.6.26-rc8 regression (related to ahci and acpi _GTF)
Submitter : Mathieu Bérard <Mathieu.Berard-S9djqSf+cojYtjvyW6yDsg@public.gmane.org>
Date : 2008-07-01 9:39 (6 days old)
References : http://marc.info/?t=121490593600001&r=1&w=4
Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Patch : http://marc.info/?l=linux-kernel&m=121514631317343&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11008
Subject : after laptop re-dock: usb-storage device no longer detected
Submitter : Lukas Hejtmanek <xhejtman-8qz54MUs51PtwjQa/ONI9g@public.gmane.org>
Date : 2008-06-26 17:37 (11 days old)
References : http://lkml.org/lkml/2008/6/26/391
Handled-By : Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
Patch : http://lkml.org/lkml/2008/6/30/305
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11006
Subject : 2.6.26-rc6: pcmcia stopped working
Submitter : Pavel Machek <pavel-AlSwsSmVLrQ@public.gmane.org>
Date : 2008-06-22 22:40 (15 days old)
References : http://marc.info/?l=linux-kernel&m=121420740806363&w=4
http://marc.info/?t=121439185700001&r=1&w=4
Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Bartlomiej Zolnierkiewicz <bzolnier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Patch : http://marc.info/?l=linux-kernel&m=121526230022719&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10957
Subject : pata_pcmcia with Sandisk Extreme III 8GB
Submitter : Komuro <komurojun-mbn-dTzOdQ2U+/YAvxtiuMwx3w@public.gmane.org>
Date : 2008-06-07 13:37 (30 days old)
References : http://marc.info/?l=linux-kernel&m=121284627119861&w=4
Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Dominik Brodowski <linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org>
Komuro <komurojun-mbn-dTzOdQ2U+/YAvxtiuMwx3w@public.gmane.org>
Patch : http://marc.info/?l=linux-kernel&m=121530861605673&w=4
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10860
Subject : total system freeze at boot with 2.6.26-rc
Submitter : Christian Casteyde <casteyde.christian-GANU6spQydw@public.gmane.org>
Date : 2008-06-05 12:38 (32 days old)
Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Patch : http://bugzilla.kernel.org/attachment.cgi?id=16556
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10815
Subject : 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0
Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-05-27 09:23 (41 days old)
References : http://lkml.org/lkml/2008/5/27/9
http://lkml.org/lkml/2008/6/14/87
Handled-By : Oleg Nesterov <oleg-6lXkIZvqkOAvJsYlp49lxw@public.gmane.org>
Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Patch : http://lkml.org/lkml/2008/5/28/16
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10726
Subject : x86-64 NODES_SHIFT compile failure.
Submitter : Dave Jones <davej-rdkfGonbjUTCLXcRTR1eJlpr/1R2p/CL@public.gmane.org>
Date : 2008-05-16 12:54 (52 days old)
References : http://lkml.org/lkml/2008/5/16/312
Handled-By : Mike Travis <travis-sJ/iWh9BUns@public.gmane.org>
Patch : http://lkml.org/lkml/2008/5/16/343
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10725
Subject : USB Mass storage mount fails: Write protect on
Submitter : Maciej Rutecki <maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-05-16 14:55 (52 days old)
References : http://marc.info/?l=linux-kernel&m=121095168003572&w=4
Handled-By : Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
Patch : http://marc.info/?l=linux-scsi&m=121433068314568&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10724
Subject : ACPI: EC: GPE storm detected, disabling EC GPE
Submitter : Justin Mattock <justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date : 2008-05-16 6:17 (52 days old)
References : http://marc.info/?l=linux-kernel&m=121091875711824&w=4
http://lkml.org/lkml/2008/5/18/168
http://lkml.org/lkml/2008/5/25/195
Patch : http://bugzilla.kernel.org/attachment.cgi?id=16364&action=view
http://bugzilla.kernel.org/attachment.cgi?id=16365&action=view
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10493
Subject : mips BCM47XX compile error
Submitter : Adrian Bunk <adrian.bunk-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
Date : 2008-04-20 17:07 (78 days old)
References : http://lkml.org/lkml/2008/4/20/34
http://lkml.org/lkml/2008/5/12/30
http://lkml.org/lkml/2008/5/18/131
http://lkml.org/lkml/2008/5/31/202
http://lkml.org/lkml/2008/6/7/154
Patch : http://marc.info/?l=linux-kernel&m=120876451216558&w=2
Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=9791
Subject : Clock is running too fast^Wslow using acpi_pm clocksource
Submitter : tosn00j02-O/bDAPVd7B0N+BqQ9rBEUg@public.gmane.org
Date : 2008-05-03 05:09 (65 days old)
Handled-By : Maciej W. Rozycki <macro-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
Patch : http://bugzilla.kernel.org/attachment.cgi?id=16180
For details, please visit the bug entries and follow the links given in
references.
As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.25,
unresolved as well as resolved, at:
http://bugzilla.kernel.org/show_bug.cgi?id=10492
Please let me know if there are any Bugzilla entries that should be added to
the list in there.
Thanks,
Rafael
^ permalink raw reply [flat|nested] 109+ messages in thread* [Bug #10493] mips BCM47XX compile error 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki @ 2008-07-06 11:39 ` Rafael J. Wysocki 2008-07-06 13:39 ` Adrian Bunk 2008-07-06 11:45 ` [Bug #10860] total system freeze at boot with 2.6.26-rc Rafael J. Wysocki ` (40 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:39 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Adrian Bunk This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10493 Subject : mips BCM47XX compile error Submitter : Adrian Bunk <adrian.bunk-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org> Date : 2008-04-20 17:07 (78 days old) References : http://lkml.org/lkml/2008/4/20/34 http://lkml.org/lkml/2008/5/12/30 http://lkml.org/lkml/2008/5/18/131 http://lkml.org/lkml/2008/5/31/202 http://lkml.org/lkml/2008/6/7/154 Patch : http://marc.info/?l=linux-kernel&m=120876451216558&w=2 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10493] mips BCM47XX compile error 2008-07-06 11:39 ` [Bug #10493] mips BCM47XX compile error Rafael J. Wysocki @ 2008-07-06 13:39 ` Adrian Bunk 0 siblings, 0 replies; 109+ messages in thread From: Adrian Bunk @ 2008-07-06 13:39 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: Linux Kernel Mailing List, Kernel Testers List On Sun, Jul 06, 2008 at 01:39:47PM +0200, Rafael J. Wysocki wrote: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. yes > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10493 > Subject : mips BCM47XX compile error > Submitter : Adrian Bunk <adrian.bunk-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org> > Date : 2008-04-20 17:07 (78 days old) > References : http://lkml.org/lkml/2008/4/20/34 > http://lkml.org/lkml/2008/5/12/30 > http://lkml.org/lkml/2008/5/18/131 > http://lkml.org/lkml/2008/5/31/202 > http://lkml.org/lkml/2008/6/7/154 > Patch : http://marc.info/?l=linux-kernel&m=120876451216558&w=2 cu Adrian ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10860] total system freeze at boot with 2.6.26-rc 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki 2008-07-06 11:39 ` [Bug #10493] mips BCM47XX compile error Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10815] 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 Rafael J. Wysocki ` (39 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Christian Casteyde, Tejun Heo This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10860 Subject : total system freeze at boot with 2.6.26-rc Submitter : Christian Casteyde <casteyde.christian-GANU6spQydw@public.gmane.org> Date : 2008-06-05 12:38 (32 days old) Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Patch : http://bugzilla.kernel.org/attachment.cgi?id=16556 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10815] 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki 2008-07-06 11:39 ` [Bug #10493] mips BCM47XX compile error Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10860] total system freeze at boot with 2.6.26-rc Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10786] parisc: 64bit SMP does not boot on J5600 Rafael J. Wysocki ` (38 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Alexey Dobriyan, Linus Torvalds, Oleg Nesterov, Paul E. McKenney This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10815 Subject : 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-05-27 09:23 (41 days old) References : http://lkml.org/lkml/2008/5/27/9 http://lkml.org/lkml/2008/6/14/87 Handled-By : Oleg Nesterov <oleg-6lXkIZvqkOAvJsYlp49lxw@public.gmane.org> Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> Patch : http://lkml.org/lkml/2008/5/28/16 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10786] parisc: 64bit SMP does not boot on J5600 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (2 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10815] 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-10 13:42 ` Domenico Andreoli 2008-07-06 11:45 ` [Bug #10741] bug in `tty: BKL pushdown'? Rafael J. Wysocki ` (37 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Domenico Andreoli This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786 Subject : parisc: 64bit SMP does not boot on J5600 Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-05-22 16:14 (46 days old) References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10786] parisc: 64bit SMP does not boot on J5600 2008-07-06 11:45 ` [Bug #10786] parisc: 64bit SMP does not boot on J5600 Rafael J. Wysocki @ 2008-07-10 13:42 ` Domenico Andreoli [not found] ` <20080710134159.GA4331-sEfEhJr8Tr7lLLHJGgvKiAC/G2K4zDHf@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Domenico Andreoli @ 2008-07-10 13:42 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Kernel Testers List, Kyle McMartin, linux-parisc-u79uwXL29TY76Z2rM5mHXA On Sun, Jul 06, 2008 at 01:45:52PM +0200, Rafael J. Wysocki wrote: > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. I am going to check it later. Last time I saw it was around 2.6.26-rc7/8. Anyway the error message was not the same firstly reported there, it could be another problem. More details will follow. Thank you. > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786 > Subject : parisc: 64bit SMP does not boot on J5600 > Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Date : 2008-05-22 16:14 (46 days old) > References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4 ciao, Domenico -----[ Domenico Andreoli, aka cavok --[ http://www.dandreoli.com/gpgkey.asc ---[ 3A0F 2F80 F79C 678A 8936 4FEE 0677 9033 A20E BC50 ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080710134159.GA4331-sEfEhJr8Tr7lLLHJGgvKiAC/G2K4zDHf@public.gmane.org>]
* Re: [Bug #10786] parisc: 64bit SMP does not boot on J5600 [not found] ` <20080710134159.GA4331-sEfEhJr8Tr7lLLHJGgvKiAC/G2K4zDHf@public.gmane.org> @ 2008-07-24 16:43 ` Domenico Andreoli 0 siblings, 0 replies; 109+ messages in thread From: Domenico Andreoli @ 2008-07-24 16:43 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Kernel Testers List, Kyle McMartin, linux-parisc-u79uwXL29TY76Z2rM5mHXA Hi, On Thu, Jul 10, 2008 at 03:42:00PM +0200, Domenico Andreoli wrote: > On Sun, Jul 06, 2008 at 01:45:52PM +0200, Rafael J. Wysocki wrote: > > > > The following bug entry is on the current list of known regressions > > from 2.6.25. Please verify if it still should be listed. > > I am going to check it later. Last time I saw it was around 2.6.26-rc7/8. I finally have the test result: Linux version 2.6.26 (cavok@ska) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #34 SMP Wed Jul 23 13:50:45 CEST 2008 FP[0] enabled: Rev 1 Model 16 The 64-bit Kernel has started... console [ttyB0] enabled Initialized PDC Console for debugging. Determining PDC firmware type: System Map. model 00005d10 00000491 00000000 00000002 77b406fc 100000f0 00000008 000000b2 000000b2 vers 00000300 CPUID vers 17 rev 10 (0x0000022a) capabilities 0x3 model 9000/785/J5600 Total Memory: 3840 MB LCD display at fffffff0f05d0008,fffffff0f05d0000 registered SMP: bootstrap CPU ID is 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 969600 Kernel command line: root=/dev/sdb5 panic=60 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux.git PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 3858944k/3932160k available (2967k kernel code, 73036k reserved, 1304k data, 240k init) virtual kernel memory layout: vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) memory : 0x0000000040000000 - 0x0000000130000000 (3840 MB) .init : 0x00000000405c4000 - 0x0000000040600000 ( 240 kB) .data : 0x00000000403e5d88 - 0x000000004052c000 (1304 kB) .text : 0x0000000040100000 - 0x00000000403e5d88 (2967 kB) Calibrating delay loop... <6>1101.00 BogoMIPS (lpj=5505024) Security Framework initialized Mount-cache hash table entries: 256 Brought up 1 CPUs net_namespace: 1432 bytes NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. Astro BC Runway Port at 0xfffffffffed00000 [10] { 12, 0x0, 0x582, 0x0000b } 2. Elroy PCI Bridge at 0xfffffffffed30000 [10/0] { 13, 0x0, 0x782, 0x0000a } 3. Elroy PCI Bridge at 0xfffffffffed32000 [10/1] { 13, 0x0, 0x782, 0x0000a } 4. Elroy PCI Bridge at 0xfffffffffed34000 [10/2] { 13, 0x0, 0x782, 0x0000a } 5. Elroy PCI Bridge at 0xfffffffffed38000 [10/4] { 13, 0x0, 0x782, 0x0000a } 6. Elroy PCI Bridge at 0xfffffffffed3c000 [10/6] { 13, 0x0, 0x782, 0x0000a } 7. Forte W+ 2w at 0xfffffffffffa0000 [32] { 0, 0x0, 0x5d1, 0x00004 } 8. Forte W+ 2w at 0xfffffffffffa2000 [34] { 0, 0x0, 0x5d1, 0x00004 } 9. Memory at 0xfffffffffed10200 [49] { 1, 0x0, 0x09e, 0x00009 } Enabling regular chassis codes support v0.05 Releasing cpu 1 now, hpa=fffffffffffa2000 > Anyway the error message was not the same firstly reported there, > it could be another problem. More details will follow. Thank you. indeed here is also the config file: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26 # Wed Jul 23 13:21:59 2008 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_IRQ_PER_CPU=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set # CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y # # Processor type and features # # CONFIG_PA7000 is not set # CONFIG_PA7100LC is not set # CONFIG_PA7200 is not set # CONFIG_PA7300LC is not set CONFIG_PA8X00=y CONFIG_PA20=y CONFIG_PREFETCH=y CONFIG_64BIT=y CONFIG_PARISC_PAGE_SIZE_4KB=y # CONFIG_PARISC_PAGE_SIZE_16KB is not set # CONFIG_PARISC_PAGE_SIZE_64KB is not set CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 # CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_COMPAT=y CONFIG_NR_CPUS=2 # # Bus options (PCI, PCMCIA, EISA, GSC, ISA) # CONFIG_GSC=y CONFIG_HPPB=y CONFIG_IOMMU_CCIO=y CONFIG_GSC_LASI=y CONFIG_GSC_WAX=y CONFIG_EISA=y CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y CONFIG_IOMMU_HELPER=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # PA-RISC specific drivers # CONFIG_SUPERIO=y CONFIG_CHASSIS_LCD_LED=y CONFIG_PDC_CHASSIS=y CONFIG_PDC_CHASSIS_WARN=y CONFIG_PDC_STABLE=y # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set CONFIG_INET6_TUNNEL=m # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set # CONFIG_NF_CT_PROTO_DCCP is not set # CONFIG_NF_CT_PROTO_SCTP is not set # CONFIG_NF_CT_PROTO_UDPLITE is not set # CONFIG_NF_CONNTRACK_AMANDA is not set CONFIG_NF_CONNTRACK_FTP=m # CONFIG_NF_CONNTRACK_H323 is not set CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_NETBIOS_NS is not set # CONFIG_NF_CONNTRACK_PPTP is not set # CONFIG_NF_CONNTRACK_SANE is not set # CONFIG_NF_CONNTRACK_SIP is not set # CONFIG_NF_CONNTRACK_TFTP is not set CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set CONFIG_NETFILTER_XT_MATCH_LIMIT=m # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m # CONFIG_IP_NF_MATCH_RECENT is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set # CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m # CONFIG_IP_NF_TARGET_REDIRECT is not set # CONFIG_IP_NF_TARGET_NETMAP is not set # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m # CONFIG_NF_NAT_TFTP is not set # CONFIG_NF_NAT_AMANDA is not set # CONFIG_NF_NAT_PPTP is not set # CONFIG_NF_NAT_H323 is not set # CONFIG_NF_NAT_SIP is not set CONFIG_IP_NF_MANGLE=m # CONFIG_IP_NF_TARGET_ECN is not set # CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_TARGET_CLUSTERIP is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_SECURITY is not set # CONFIG_IP_NF_ARPTABLES is not set # # IPv6: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV6=m # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m # CONFIG_IP6_NF_MATCH_RT is not set # CONFIG_IP6_NF_MATCH_OPTS is not set # CONFIG_IP6_NF_MATCH_FRAG is not set # CONFIG_IP6_NF_MATCH_HL is not set # CONFIG_IP6_NF_MATCH_IPV6HEADER is not set # CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set # CONFIG_IP6_NF_MATCH_EUI64 is not set CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m # CONFIG_IP6_NF_MANGLE is not set # CONFIG_IP6_NF_RAW is not set # CONFIG_IP6_NF_SECURITY is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set # CONFIG_PNP is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=m CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # CONFIG_IDE_PROC_FS is not set # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=m # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_LASI700 is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_ZALON is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=m # # MII PHY device drivers # CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_LASI_82596 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set CONFIG_VORTEX=y # CONFIG_TYPHOON is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_GSCPS2 is not set # CONFIG_HP_SDC is not set # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_GSC=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MUX is not set CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # # Multimedia devices # # # Multimedia core support # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # # CONFIG_DAB is not set # # Graphics support # # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_SOUND=m CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=m # CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y CONFIG_SND_AD1889=m # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_USB is not set # CONFIG_SND_GSC is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_MON is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=0 CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786 > > Subject : parisc: 64bit SMP does not boot on J5600 > > Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Date : 2008-05-22 16:14 (46 days old) > > References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4 Regards, Domenico -----[ Domenico Andreoli, aka cavok --[ http://www.dandreoli.com/gpgkey.asc ---[ 3A0F 2F80 F79C 678A 8936 4FEE 0677 9033 A20E BC50 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10741] bug in `tty: BKL pushdown'? 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (3 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10786] parisc: 64bit SMP does not boot on J5600 Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 14:47 ` Johannes Weiner 2008-07-06 11:45 ` [Bug #10726] x86-64 NODES_SHIFT compile failure Rafael J. Wysocki ` (36 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Alan Cox, Johannes Weiner This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10741 Subject : bug in `tty: BKL pushdown'? Submitter : Johannes Weiner <hannes-BfM5BwqdGSkPyMaTEpOvjQ@public.gmane.org> Date : 2008-05-18 2:16 (50 days old) References : http://marc.info/?l=linux-kernel&m=121107706506181&w=4 http://lkml.org/lkml/2008/6/16/104 Handled-By : Alan Cox <alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10741] bug in `tty: BKL pushdown'? 2008-07-06 11:45 ` [Bug #10741] bug in `tty: BKL pushdown'? Rafael J. Wysocki @ 2008-07-06 14:47 ` Johannes Weiner 0 siblings, 0 replies; 109+ messages in thread From: Johannes Weiner @ 2008-07-06 14:47 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Kernel Testers List, Alan Cox Hi, "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org> writes: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. Yes. > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10741 > Subject : bug in `tty: BKL pushdown'? > Submitter : Johannes Weiner <hannes-BfM5BwqdGSkPyMaTEpOvjQ@public.gmane.org> > Date : 2008-05-18 2:16 (50 days old) > References : http://marc.info/?l=linux-kernel&m=121107706506181&w=4 > http://lkml.org/lkml/2008/6/16/104 > Handled-By : Alan Cox <alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org> Hannes ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10726] x86-64 NODES_SHIFT compile failure. 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (4 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10741] bug in `tty: BKL pushdown'? Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10724] ACPI: EC: GPE storm detected, disabling EC GPE Rafael J. Wysocki ` (35 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Dave Jones, Mike Travis This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10726 Subject : x86-64 NODES_SHIFT compile failure. Submitter : Dave Jones <davej-rdkfGonbjUTCLXcRTR1eJlpr/1R2p/CL@public.gmane.org> Date : 2008-05-16 12:54 (52 days old) References : http://lkml.org/lkml/2008/5/16/312 Handled-By : Mike Travis <travis-sJ/iWh9BUns@public.gmane.org> Patch : http://lkml.org/lkml/2008/5/16/343 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10724] ACPI: EC: GPE storm detected, disabling EC GPE 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (5 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10726] x86-64 NODES_SHIFT compile failure Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 17:44 ` Justin Mattock 2008-07-06 11:45 ` [Bug #10821] rt25xx: lock dependency warning, association failure, and kmalloc corruption Rafael J. Wysocki ` (34 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Alexey Starikovskiy, Justin Mattock This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10724 Subject : ACPI: EC: GPE storm detected, disabling EC GPE Submitter : Justin Mattock <justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-05-16 6:17 (52 days old) References : http://marc.info/?l=linux-kernel&m=121091875711824&w=4 http://lkml.org/lkml/2008/5/18/168 http://lkml.org/lkml/2008/5/25/195 Patch : http://bugzilla.kernel.org/attachment.cgi?id=16364&action=view http://bugzilla.kernel.org/attachment.cgi?id=16365&action=view ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10724] ACPI: EC: GPE storm detected, disabling EC GPE 2008-07-06 11:45 ` [Bug #10724] ACPI: EC: GPE storm detected, disabling EC GPE Rafael J. Wysocki @ 2008-07-06 17:44 ` Justin Mattock 0 siblings, 0 replies; 109+ messages in thread From: Justin Mattock @ 2008-07-06 17:44 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Kernel Testers List, Alexey Starikovskiy On Sun, Jul 6, 2008 at 11:45 AM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10724 > Subject : ACPI: EC: GPE storm detected, disabling EC GPE > Submitter : Justin Mattock <justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Date : 2008-05-16 6:17 (52 days old) > References : http://marc.info/?l=linux-kernel&m=121091875711824&w=4 > http://lkml.org/lkml/2008/5/18/168 > http://lkml.org/lkml/2008/5/25/195 > Patch : http://bugzilla.kernel.org/attachment.cgi?id=16364&action=view > http://bugzilla.kernel.org/attachment.cgi?id=16365&action=view > > > yes; From what I can see so far, the reason for the gpe storm detector going off is due to too many interrupts with the battery. As an example there was a bug filed for the same issue with the macbook's: https://bugzilla.novell.com/show_bug.cgi?id=301365#c10 using acpi_osi=Darwin does prevent the gpe storm detector from going off, but you loose any info on the battery. If anybody has any ideas on modifying any of the battery modules, or adjusting the DSDT it sure would be appreciated. regards; -- Justin P. Mattock ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10821] rt25xx: lock dependency warning, association failure, and kmalloc corruption 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (6 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10724] ACPI: EC: GPE storm detected, disabling EC GPE Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10725] USB Mass storage mount fails: Write protect on Rafael J. Wysocki ` (33 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Christian Casteyde, Ivo van Doorn This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10821 Subject : rt25xx: lock dependency warning, association failure, and kmalloc corruption Submitter : Christian Casteyde <casteyde.christian-GANU6spQydw@public.gmane.org> Date : 2008-05-29 14:30 (39 days old) Handled-By : Ivo van Doorn <IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10725] USB Mass storage mount fails: Write protect on 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (7 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10821] rt25xx: lock dependency warning, association failure, and kmalloc corruption Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10629] 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 Rafael J. Wysocki ` (32 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Alan Stern, Maciej Rutecki This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10725 Subject : USB Mass storage mount fails: Write protect on Submitter : Maciej Rutecki <maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-05-16 14:55 (52 days old) References : http://marc.info/?l=linux-kernel&m=121095168003572&w=4 Handled-By : Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> Patch : http://marc.info/?l=linux-scsi&m=121433068314568&w=2 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10629] 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (8 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10725] USB Mass storage mount fails: Write protect on Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10843] Display artifacts on XOrg logout with PAT kernel and VESA framebuffer Rafael J. Wysocki ` (31 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Alexey Dobriyan, Paul E. McKenney This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10629 Subject : 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-05-05 09:59 (63 days old) References : http://lkml.org/lkml/2008/5/5/28 Handled-By : Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10843] Display artifacts on XOrg logout with PAT kernel and VESA framebuffer 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (9 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10629] 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 23:08 ` Frans Pop 2008-07-06 11:45 ` [Bug #10714] powerpc: Badness seen on 2.6.26-rc2 with lockdep enabled Rafael J. Wysocki ` (30 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Frans Pop This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10843 Subject : Display artifacts on XOrg logout with PAT kernel and VESA framebuffer Submitter : Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org> Date : 2008-05-31 14:04 (37 days old) References : http://lkml.org/lkml/2008/6/7/206 http://lkml.org/lkml/2008/6/15/119 http://lkml.org/lkml/2008/6/23/160 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10843] Display artifacts on XOrg logout with PAT kernel and VESA framebuffer 2008-07-06 11:45 ` [Bug #10843] Display artifacts on XOrg logout with PAT kernel and VESA framebuffer Rafael J. Wysocki @ 2008-07-06 23:08 ` Frans Pop 0 siblings, 0 replies; 109+ messages in thread From: Frans Pop @ 2008-07-06 23:08 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: Linux Kernel Mailing List, Kernel Testers List On Sunday 06 July 2008, you wrote: > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10843 > Subject : Display artifacts on XOrg logout with PAT kernel and VESA > framebuffer Yes. ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10714] powerpc: Badness seen on 2.6.26-rc2 with lockdep enabled 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (10 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10843] Display artifacts on XOrg logout with PAT kernel and VESA framebuffer Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #11024] 2.6.25 to 2.6.26-rc8 regression (related to ahci and acpi _GTF) Rafael J. Wysocki ` (29 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Balbir Singh, Benjamin Herrenschmidt This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10714 Subject : powerpc: Badness seen on 2.6.26-rc2 with lockdep enabled Submitter : Balbir Singh <balbir-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> Date : 2008-05-14 12:57 (54 days old) References : http://marc.info/?l=linux-kernel&m=121076917429133&w=4 Handled-By : Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11024] 2.6.25 to 2.6.26-rc8 regression (related to ahci and acpi _GTF) 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (11 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10714] powerpc: Badness seen on 2.6.26-rc2 with lockdep enabled Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10954] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c Rafael J. Wysocki ` (28 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Mathieu Bérard, Tejun Heo This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11024 Subject : 2.6.25 to 2.6.26-rc8 regression (related to ahci and acpi _GTF) Submitter : Mathieu Bérard <Mathieu.Berard-S9djqSf+cojYtjvyW6yDsg@public.gmane.org> Date : 2008-07-01 9:39 (6 days old) References : http://marc.info/?t=121490593600001&r=1&w=4 Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Patch : http://marc.info/?l=linux-kernel&m=121514631317343&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10954] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (12 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11024] 2.6.25 to 2.6.26-rc8 regression (related to ahci and acpi _GTF) Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 17:47 ` Justin Mattock 2008-07-06 11:45 ` [Bug #11008] after laptop re-dock: usb-storage device no longer detected Rafael J. Wysocki ` (27 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Justin Mattock This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10954 Subject : hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c Submitter : Justin Mattock <justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-06-21 2:05 (16 days old) References : http://marc.info/?l=linux-kernel&m=121401399622190&w=4 http://marc.info/?t=121416231700010&r=1&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10954] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c 2008-07-06 11:45 ` [Bug #10954] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c Rafael J. Wysocki @ 2008-07-06 17:47 ` Justin Mattock 0 siblings, 0 replies; 109+ messages in thread From: Justin Mattock @ 2008-07-06 17:47 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: Linux Kernel Mailing List, Kernel Testers List On Sun, Jul 6, 2008 at 11:45 AM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10954 > Subject : hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c > Submitter : Justin Mattock <justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Date : 2008-06-21 2:05 (16 days old) > References : http://marc.info/?l=linux-kernel&m=121401399622190&w=4 > http://marc.info/?t=121416231700010&r=1&w=4 > > > yes; as an estimate(been busy with another bug), I'm going to say out of 100 reboots this message will appear 2 times in a row, and then disappear. regards; -- Justin P. Mattock ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11008] after laptop re-dock: usb-storage device no longer detected 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (13 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10954] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #11009] No console on Riva TNT since 2.6.26-0.rc4 Rafael J. Wysocki ` (26 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Alan Stern, Lukas Hejtmanek This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11008 Subject : after laptop re-dock: usb-storage device no longer detected Submitter : Lukas Hejtmanek <xhejtman-8qz54MUs51PtwjQa/ONI9g@public.gmane.org> Date : 2008-06-26 17:37 (11 days old) References : http://lkml.org/lkml/2008/6/26/391 Handled-By : Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> Patch : http://lkml.org/lkml/2008/6/30/305 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11009] No console on Riva TNT since 2.6.26-0.rc4 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (14 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11008] after laptop re-dock: usb-storage device no longer detected Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10919] [regression] display dimming is slow and laggy - Acer Travelmate 661lci Rafael J. Wysocki ` (25 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Quel Qun This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11009 Subject : No console on Riva TNT since 2.6.26-0.rc4 Submitter : Quel Qun <kelk1-Wuw85uim5zDR7s880joybQ@public.gmane.org> Date : 2008-06-26 20:04 (11 days old) References : http://marc.info/?l=linux-kernel&m=121451344229718&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10919] [regression] display dimming is slow and laggy - Acer Travelmate 661lci 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (15 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11009] No console on Riva TNT since 2.6.26-0.rc4 Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10960] 2.6.26-rc: SPARC: Sun Ultra 10 can not boot Rafael J. Wysocki ` (24 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Maximilian Engelhardt This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10919 Subject : [regression] display dimming is slow and laggy - Acer Travelmate 661lci Submitter : Maximilian Engelhardt <maxi-OwNUvPV92VfddJNmlsFzeA@public.gmane.org> Date : 2008-06-14 22:31 (23 days old) References : http://marc.info/?l=linux-kernel&m=121348428828320&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10960] 2.6.26-rc: SPARC: Sun Ultra 10 can not boot 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (16 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10919] [regression] display dimming is slow and laggy - Acer Travelmate 661lci Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #11039] 2.6.28-rc8-git3 forcedeth WARNING (kills the interface) Rafael J. Wysocki ` (23 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Alexander Beregalov, David Miller This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10960 Subject : 2.6.26-rc: SPARC: Sun Ultra 10 can not boot Submitter : Alexander Beregalov <a.beregalov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-06-19 14:07 (18 days old) References : http://marc.info/?l=linux-kernel&m=121388456519637&w=4 Handled-By : David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11039] 2.6.28-rc8-git3 forcedeth WARNING (kills the interface) 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (17 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10960] 2.6.26-rc: SPARC: Sun Ultra 10 can not boot Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 13:44 ` Brad Campbell 2008-07-06 11:45 ` [Bug #10955] v2.6.26-rc7: BUG task_struct: Poison overwritten Rafael J. Wysocki ` (22 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Brad Campbell This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11039 Subject : 2.6.28-rc8-git3 forcedeth WARNING (kills the interface) Submitter : Brad Campbell <brad-UPaTOFvTz1K6c6uEtOJ/EA@public.gmane.org> Date : 2008-07-03 10:07 (4 days old) References : http://marc.info/?l=linux-netdev&m=121508714430752&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #11039] 2.6.28-rc8-git3 forcedeth WARNING (kills the interface) 2008-07-06 11:45 ` [Bug #11039] 2.6.28-rc8-git3 forcedeth WARNING (kills the interface) Rafael J. Wysocki @ 2008-07-06 13:44 ` Brad Campbell 0 siblings, 0 replies; 109+ messages in thread From: Brad Campbell @ 2008-07-06 13:44 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: Linux Kernel Mailing List, Kernel Testers List Rafael J. Wysocki wrote: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11039 > Subject : 2.6.28-rc8-git3 forcedeth WARNING (kills the interface) > Submitter : Brad Campbell <brad-UPaTOFvTz1K6c6uEtOJ/EA@public.gmane.org> > Date : 2008-07-03 10:07 (4 days old) > References : http://marc.info/?l=linux-netdev&m=121508714430752&w=4 While it is certainly a problem I can't verify it as a regression. When I got the machine I ran it with 2.6.25 but found SATA errors were locking the box. The SATA issue is resolved with 2.6.26-rc and I'm not terribly keen to risk my data to go back and check unless someone absolutely needs me to. It does appear to be quite a problem though. brad@srv:~$ dmesg | head -n5 [ 0.000000] Linux version 2.6.26-rc8-git4 (brad@srv) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #5 SMP Fri Jul 4 23:08:38 GST 2008 [ 0.000000] Command line: root=/dev/md1 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable) [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) brad@srv:~$ dmesg | grep 'eth1: tx_timeout' | wc -l 27 brad@srv:~$ uptime 17:40:25 up 1 day, 1:15, 5 users, load average: 0.73, 0.61, 0.49 Regards, Brad -- Dolphins are so intelligent that within a few weeks they can train Americans to stand at the edge of the pool and throw them fish. ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10955] v2.6.26-rc7: BUG task_struct: Poison overwritten 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (18 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11039] 2.6.28-rc8-git3 forcedeth WARNING (kills the interface) Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10985] backlight doesn't come on after resume with i915 video Rafael J. Wysocki ` (21 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Peter Zijlstra, Vegard Nossum This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10955 Subject : v2.6.26-rc7: BUG task_struct: Poison overwritten Submitter : Vegard Nossum <vegard.nossum-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-06-21 19:24 (16 days old) References : http://marc.info/?l=linux-kernel&m=121407641925121&w=4 Handled-By : Peter Zijlstra <a.p.zijlstra-/NLkJaSkS4VmR6Xm/wNWPw@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10985] backlight doesn't come on after resume with i915 video 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (19 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10955] v2.6.26-rc7: BUG task_struct: Poison overwritten Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #11040] 2.6.26-rc: host can not shutdown: ata problem Rafael J. Wysocki ` (20 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Jon Dowland This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10985 Subject : backlight doesn't come on after resume with i915 video Submitter : Jon Dowland <jon+bugzilla.kernel.org-DVpwQSnkAF5AfugRpC6u6w@public.gmane.org> Date : 2008-06-26 02:09 (11 days old) ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11040] 2.6.26-rc: host can not shutdown: ata problem 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (20 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10985] backlight doesn't come on after resume with i915 video Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10971] radeonfb : radeon X800 family support (atombios) Rafael J. Wysocki ` (19 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Alexander Beregalov This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11040 Subject : 2.6.26-rc: host can not shutdown: ata problem Submitter : Alexander Beregalov <a.beregalov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-07-03 21:43 (4 days old) References : http://marc.info/?l=linux-kernel&m=121512197225068&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10971] radeonfb : radeon X800 family support (atombios) 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (21 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11040] 2.6.26-rc: host can not shutdown: ata problem Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #11025] [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) Rafael J. Wysocki ` (18 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, "Jimmy.Jazz-hi6Y0CQ0nG0 This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10971 Subject : radeonfb : radeon X800 family support (atombios) Submitter : Jimmy.Jazz-hi6Y0CQ0nG0@public.gmane.org Date : 2008-06-23 14:35 (14 days old) ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11025] [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (22 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10971] radeonfb : radeon X800 family support (atombios) Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-07 16:16 ` Mel Gorman 2008-07-06 11:45 ` [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki ` (17 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Andrew Morton, Andy Whitcroft, Dan Williams, Lee Schermerhorn, Mel Gorman This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11025 Subject : [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) Submitter : Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> Date : 2008-07-01 1:57 (6 days old) References : http://marc.info/?l=linux-kernel&m=121487749429883&w=4 Handled-By : Mel Gorman <mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> Andy Whitcroft <apw-26w3C0LaAnFg9hUCZPvPmw@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #11025] [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) 2008-07-06 11:45 ` [Bug #11025] [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) Rafael J. Wysocki @ 2008-07-07 16:16 ` Mel Gorman [not found] ` <20080707161620.GA30381-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Mel Gorman @ 2008-07-07 16:16 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Kernel Testers List, Andrew Morton, Andy Whitcroft, Dan Williams, Lee Schermerhorn On (06/07/08 13:45), Rafael J. Wysocki didst pronounce: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11025 > Subject : [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) > Submitter : Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> > Date : 2008-07-01 1:57 (6 days old) > References : http://marc.info/?l=linux-kernel&m=121487749429883&w=4 > Handled-By : Mel Gorman <mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> > Andy Whitcroft <apw-26w3C0LaAnFg9hUCZPvPmw@public.gmane.org> > Fixed by commit 494de90098784b8e2797598cefdd34188884ec2e and should be closed. -- Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080707161620.GA30381-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org>]
* Re: [Bug #11025] [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) [not found] ` <20080707161620.GA30381-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> @ 2008-07-07 22:30 ` Rafael J. Wysocki 0 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-07 22:30 UTC (permalink / raw) To: Mel Gorman Cc: Linux Kernel Mailing List, Kernel Testers List, Andrew Morton, Andy Whitcroft, Dan Williams, Lee Schermerhorn On Monday, 7 of July 2008, Mel Gorman wrote: > On (06/07/08 13:45), Rafael J. Wysocki didst pronounce: > > This message has been generated automatically as a part of a report > > of recent regressions. > > > > The following bug entry is on the current list of known regressions > > from 2.6.25. Please verify if it still should be listed. > > > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11025 > > Subject : [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) > > Submitter : Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> > > Date : 2008-07-01 1:57 (6 days old) > > References : http://marc.info/?l=linux-kernel&m=121487749429883&w=4 > > Handled-By : Mel Gorman <mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> > > Andy Whitcroft <apw-26w3C0LaAnFg9hUCZPvPmw@public.gmane.org> > > > > Fixed by commit 494de90098784b8e2797598cefdd34188884ec2e and should be > closed. Already closed. Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (23 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11025] [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 18:17 ` Randy Dunlap 2008-07-06 11:45 ` [Bug #11035] System hangs on 2.6.26-rc8 Rafael J. Wysocki ` (16 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Randy Dunlap, Yinghai Lu This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10872 Subject : x86_64 boot hang when CONFIG_NUMA=n Submitter : Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> Date : 2008-06-05 21:50 (32 days old) References : http://marc.info/?l=linux-kernel&m=121270308607116&w=4 http://lkml.org/lkml/2008/6/11/355 http://lkml.org/lkml/2008/6/15/117 Handled-By : Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n 2008-07-06 11:45 ` [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki @ 2008-07-06 18:17 ` Randy Dunlap [not found] ` <20080706111750.a6d77e81.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Randy Dunlap @ 2008-07-06 18:17 UTC (permalink / raw) To: Rafael J. Wysocki, torvalds Cc: Linux Kernel Mailing List, Kernel Testers List, Yinghai Lu On Sun, 6 Jul 2008 13:45:53 +0200 (CEST) Rafael J. Wysocki wrote: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10872 > Subject : x86_64 boot hang when CONFIG_NUMA=n > Submitter : Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> > Date : 2008-06-05 21:50 (32 days old) > References : http://marc.info/?l=linux-kernel&m=121270308607116&w=4 > http://lkml.org/lkml/2008/6/11/355 > http://lkml.org/lkml/2008/6/15/117 > Handled-By : Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. The last lines from the (netconsole) log are: calling early_fill_mp_bus_info+0x0/0x7b2 node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00,3f] on node 0 link 1 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [90000000, fddfffff] bus: 00 index 2 mmio: [80000000, 83ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fe000000, ffffffff] bus: 00 index 5 mmio: [280000000, fcffffffff] bus: [40,ff] on node 1 link 2 bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [fde00000, fdffffff] --- ~Randy Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA http://linuxplumbersconf.org/ ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080706111750.a6d77e81.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080706111750.a6d77e81.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> @ 2008-07-06 18:33 ` Linus Torvalds [not found] ` <alpine.LFD.1.10.0807061133230.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> 2008-07-07 6:42 ` Ingo Molnar 1 sibling, 1 reply; 109+ messages in thread From: Linus Torvalds @ 2008-07-06 18:33 UTC (permalink / raw) To: Randy Dunlap Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List, Yinghai Lu On Sun, 6 Jul 2008, Randy Dunlap wrote: > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. Ok, then it wasn't the nr_zones thing. Since it seems to be repeatable for you, can you bisect it? Linus ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <alpine.LFD.1.10.0807061133230.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <alpine.LFD.1.10.0807061133230.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> @ 2008-07-07 6:32 ` Ingo Molnar [not found] ` <20080707063218.GC23583-X9Un+BFzKDI@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Ingo Molnar @ 2008-07-07 6:32 UTC (permalink / raw) To: Linus Torvalds Cc: Randy Dunlap, Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List, Yinghai Lu * Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote: > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. > > Ok, then it wasn't the nr_zones thing. > > Since it seems to be repeatable for you, can you bisect it? one guess would be: | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 | Author: Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> | Date: Sun Apr 13 01:41:58 2008 -0700 | | x86: work around io allocation overlap of HT links but ... since CONFIG_NUMA makes it work, i'm not sure about that. Randy, could you post the full CONFIG_NUMA bootlog as well, does it show any difference in resource allocations? Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080707063218.GC23583-X9Un+BFzKDI@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080707063218.GC23583-X9Un+BFzKDI@public.gmane.org> @ 2008-07-07 6:57 ` Yinghai Lu 2008-07-07 18:39 ` Randy Dunlap 1 sibling, 0 replies; 109+ messages in thread From: Yinghai Lu @ 2008-07-07 6:57 UTC (permalink / raw) To: Ingo Molnar Cc: Linus Torvalds, Randy Dunlap, Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List On Sun, Jul 6, 2008 at 11:32 PM, Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org> wrote: > > * Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote: > >> > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. >> >> Ok, then it wasn't the nr_zones thing. >> >> Since it seems to be repeatable for you, can you bisect it? > > one guess would be: > > | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 > | Author: Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > | Date: Sun Apr 13 01:41:58 2008 -0700 > | > | x86: work around io allocation overlap of HT links > > but ... since CONFIG_NUMA makes it work, i'm not sure about that. > > Randy, could you post the full CONFIG_NUMA bootlog as well, does it show > any difference in resource allocations? > l looked resource allocations in that bootlog. all my AMD test servers work well with Randy's config (!NUMA) ( Linus tree or tip tree) YH ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080707063218.GC23583-X9Un+BFzKDI@public.gmane.org> 2008-07-07 6:57 ` Yinghai Lu @ 2008-07-07 18:39 ` Randy Dunlap [not found] ` <20080707113917.6fda3f7d.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> 1 sibling, 1 reply; 109+ messages in thread From: Randy Dunlap @ 2008-07-07 18:39 UTC (permalink / raw) To: Ingo Molnar Cc: Linus Torvalds, Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List, Yinghai Lu [-- Attachment #1: Type: text/plain, Size: 1165 bytes --] On Mon, 7 Jul 2008 08:32:18 +0200 Ingo Molnar wrote: > > * Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote: > > > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. > > > > Ok, then it wasn't the nr_zones thing. > > > > Since it seems to be repeatable for you, can you bisect it? > > one guess would be: > > | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 > | Author: Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > | Date: Sun Apr 13 01:41:58 2008 -0700 > | > | x86: work around io allocation overlap of HT links > > but ... since CONFIG_NUMA makes it work, i'm not sure about that. > > Randy, could you post the full CONFIG_NUMA bootlog as well, does it show > any difference in resource allocations? Good and bad boot logs are attached. There are several differences, but I don't see any that are significant. I've started bisecting with: $ git bisect start $ git bisect bad v2.6.26-rc1 $ git bisect good v2.6.25 That's only about 1.29M lines of changes. --- ~Randy Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA http://linuxplumbersconf.org/ [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: netcon-4556.log --] [-- Type: text/x-log; name="netcon-4556.log", Size: 80372 bytes --] Linux version 2.6.26-rc9 (root-HX1mpBeGVvl+EwfxrR/Ze0B3C2bhBk7L0E9HWUfgJXw@public.gmane.org) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Sat Jul 5 17:04:54 PDT 2008 Command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54556@139.185.50.77/eth0,54556-/jsH/OTgFlxns6bq1NedLA@public.gmane.org/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. Entering add_active_range(0, 1, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 523856) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2621439) 2 entries of 3200 used max_pfn_mapped = 2621439 init_memory_mapping DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE50780, 005C (r1 HP A08 2 Ò\x04 162E) ACPI: FACP 7FE50800, 00F4 (r3 HP A08 2 Ò\x04 162E) ACPI: DSDT 7FE50900, 3F75 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS 7FE50100, 0040 ACPI: SPCR 7FE50140, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E) ACPI: MCFG 7FE501C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET 7FE50200, 0038 (r1 HP A08 2 Ò\x04 162E) ACPI: SPMI 7FE50240, 0040 (r5 HP ProLiant 1 Ò\x04 162E) ACPI: APIC 7FE50280, 00DE (r1 HP 00000083 2 0) ACPI: SRAT 7FE50380, 0110 (r1 AMD HAMMER 1 AMD 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 1, 159) 0 entries of 3200 used SRAT: Node 0 PXM 0 100000-80000000 Entering add_active_range(0, 256, 523856) 1 entries of 3200 used SRAT: Node 0 PXM 0 100000000-180000000 Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used SRAT: Node 1 PXM 1 180000000-280000000 Entering add_active_range(1, 1572864, 2621439) 3 entries of 3200 used NUMA: Allocated memnodemap from 12000 - 17080 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000180000000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [0000000000018000 - 0000000000047fff] pages 30 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-84e32f] TEXT DATA BSS early res: 3 [7fd05000-7fe4f6aa] RAMDISK early res: 4 [9f400-fffff] BIOS reserved early res: 5 [8000-11fff] PGTABLE early res: 6 [12000-1707f] MEMNODEMAP Bootmem setup node 1 0000000180000000-000000027ffff000 NODE_DATA [0000000180000000 - 0000000180003fff] bootmap [0000000180004000 - 0000000180023fff] pages 20 [ffffe20000000000-ffffe200049fffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ffffe20004a00000-ffffe200053fffff] PMD -> [ffff81000c000000-ffff81000c9fffff] on node 0 [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff810180200000-ffff8101839fffff] on node 1 Zone PFN ranges: DMA 1 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2621439 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 1 -> 159 0: 256 -> 523856 0: 1048576 -> 1572864 1: 1572864 -> 2621439 On node 0 totalpages: 1048046 DMA zone: 56 pages used for memmap DMA zone: 1730 pages reserved DMA zone: 2212 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 Movable zone: 0 pages used for memmap On node 1 totalpages: 1048575 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14336 pages used for memmap Normal zone: 1034239 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 36528 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4 Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2059051 Policy zone: Normal Kernel command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54556-/jsH/OTgFlz2xuUunCWziw@public.gmane.org/eth0,54556-/jsH/OTgFlxns6bq1NedLA@public.gmane.org/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1004.624 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Node 0: aperture @ c000000 size 64 MB Aperture pointing to e820 RAM. Ignoring. No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 PM: Registered nosave memory: 0000000004000000 - 0000000008000000 Memory: 8197816k/10485756k available (3372k kernel code, 188668k reserved, 1720k data, 344k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 hpet clockevent registered Calibrating delay using timer specific routine.. 2010.80 BogoMIPS (lpj=4021606) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20080321 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12557812 Detected 12.557 MHz APIC timer. Booting processor 1/2 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2009.35 BogoMIPS (lpj=4018709) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 2009.43 BogoMIPS (lpj=4018874) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 2009.35 BogoMIPS (lpj=4018702) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Brought up 4 CPUs Total of 4 processors activated (8038.94 BogoMIPS). khelper used greatest stack depth: 5976 bytes left calling init_cpufreq_transition_notifier_list+0x0/0x1b initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs calling net_ns_init+0x0/0x15d net_namespace: 368 bytes initcall net_ns_init+0x0/0x15d returned 0 after 3 msecs calling cpufreq_tsc+0x0/0x16 initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs calling init_smp_flush+0x0/0x49 initcall init_smp_flush+0x0/0x49 returned 0 after 0 msecs calling sysctl_init+0x0/0x32 initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs calling ksysfs_init+0x0/0xbb initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs calling init_jiffies_clocksource+0x0/0x12 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs calling pm_init+0x0/0x34 initcall pm_init+0x0/0x34 returned 0 after 0 msecs calling pm_disk_init+0x0/0x19 initcall pm_disk_init+0x0/0x19 returned 0 after 0 msecs calling swsusp_header_init+0x0/0x2c initcall swsusp_header_init+0x0/0x2c returned 0 after 0 msecs calling filelock_init+0x0/0x2e initcall filelock_init+0x0/0x2e returned 0 after 0 msecs calling init_misc_binfmt+0x0/0x3f initcall init_misc_binfmt+0x0/0x3f returned 0 after 0 msecs calling init_script_binfmt+0x0/0x12 initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs calling init_elf_binfmt+0x0/0x12 initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs calling init_compat_elf_binfmt+0x0/0x12 initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs calling debugfs_init+0x0/0x51 initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs calling random32_init+0x0/0x58 initcall random32_init+0x0/0x58 returned 0 after 0 msecs calling cpufreq_core_init+0x0/0x75 initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 msecs calling cpuidle_init+0x0/0x40 initcall cpuidle_init+0x0/0x40 returned 0 after 0 msecs calling sock_init+0x0/0x59 initcall sock_init+0x0/0x59 returned 0 after 0 msecs calling netpoll_init+0x0/0x31 initcall netpoll_init+0x0/0x31 returned 0 after 0 msecs calling netlink_proto_init+0x0/0x14d NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x14d returned 0 after 0 msecs calling bdi_class_init+0x0/0x3d initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs calling kobject_uevent_init+0x0/0x45 initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs calling pcibus_class_init+0x0/0x12 initcall pcibus_class_init+0x0/0x12 returned 0 after 0 msecs calling pci_driver_init+0x0/0x12 initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs calling backlight_class_init+0x0/0x49 initcall backlight_class_init+0x0/0x49 returned 0 after 0 msecs calling tty_class_init+0x0/0x2a initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs calling vtconsole_class_init+0x0/0xba initcall vtconsole_class_init+0x0/0xba returned 0 after 0 msecs calling register_node_type+0x0/0x6b initcall register_node_type+0x0/0x6b returned 0 after 0 msecs calling early_fill_mp_bus_info+0x0/0x7ed node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00,3f] on node 0 link 1 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [90000000, fddfffff] bus: 00 index 2 mmio: [80000000, 83ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fe000000, ffffffff] bus: 00 index 5 mmio: [280000000, fcffffffff] bus: [40,ff] on node 1 link 2 bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [fde00000, fdffffff] bus: 40 index 2 mmio: [84000000, 8fffffff] initcall early_fill_mp_bus_info+0x0/0x7ed returned 0 after 3 msecs calling arch_kdebugfs_init+0x0/0x8 initcall arch_kdebugfs_init+0x0/0x8 returned 0 after 0 msecs calling mtrr_if_init+0x0/0x77 initcall mtrr_if_init+0x0/0x77 returned 0 after 0 msecs calling ffh_cstate_init+0x0/0x31 initcall ffh_cstate_init+0x0/0x31 returned -1 after 0 msecs initcall ffh_cstate_init+0x0/0x31 returned with error code -1 calling acpi_pci_init+0x0/0x4a ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x4a returned 0 after 0 msecs calling init_acpi_device_notify+0x0/0x4b initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs calling dmi_id_init+0x0/0x2e9 initcall dmi_id_init+0x0/0x2e9 returned 0 after 0 msecs calling pci_access_init+0x0/0x4e PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort. initcall pci_access_init+0x0/0x4e returned 0 after 0 msecs calling topology_init+0x0/0x7c initcall topology_init+0x0/0x7c returned 0 after 0 msecs calling mtrr_init_finialize+0x0/0x34 initcall mtrr_init_finialize+0x0/0x34 returned 0 after 0 msecs calling param_sysfs_init+0x0/0x1e7 initcall param_sysfs_init+0x0/0x1e7 returned 0 after 3 msecs calling pm_sysrq_init+0x0/0x19 initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 msecs calling readahead_init+0x0/0x38 initcall readahead_init+0x0/0x38 returned 0 after 0 msecs calling init_bio+0x0/0xc5 initcall init_bio+0x0/0xc5 returned 0 after 0 msecs calling blk_settings_init+0x0/0x2a initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs calling blk_ioc_init+0x0/0x2a initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs calling genhd_device_init+0x0/0x40 initcall genhd_device_init+0x0/0x40 returned 0 after 0 msecs calling fbmem_init+0x0/0x8a initcall fbmem_init+0x0/0x8a returned 0 after 0 msecs calling acpi_init+0x0/0x21d ACPI: EC: Look up EC in DSDT ACPI: SSDT 7FE58000, 04F0 (r2 HP PNOWSSDT 2 HP 1) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: MCFG area at 80000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at 80000000 - 8fffffff initcall acpi_init+0x0/0x21d returned 0 after 30 msecs calling acpi_scan_init+0x0/0x11e initcall acpi_scan_init+0x0/0x11e returned 0 after 7 msecs calling acpi_ec_init+0x0/0x61 initcall acpi_ec_init+0x0/0x61 returned 0 after 0 msecs calling acpi_pci_root_init+0x0/0x28 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 15 msecs calling acpi_pci_link_init+0x0/0x48 ACPI: PCI Interrupt Link [LNKW] (IRQs *16) ACPI: PCI Interrupt Link [LNKX] (IRQs *17) ACPI: PCI Interrupt Link [LNKY] (IRQs *18) ACPI: PCI Interrupt Link [LNKZ] (IRQs *19) ACPI: PCI Interrupt Link [LNU0] (IRQs *22) ACPI: PCI Interrupt Link [LNU2] (IRQs *23) ACPI: PCI Interrupt Link [LNKA] (IRQs *54) ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. initcall acpi_pci_link_init+0x0/0x48 returned 0 after 3 msecs calling acpi_power_init+0x0/0x77 initcall acpi_power_init+0x0/0x77 returned 0 after 0 msecs calling acpi_system_init+0x0/0x260 initcall acpi_system_init+0x0/0x260 returned 0 after 0 msecs calling acpi_cm_sbs_init+0x0/0x8 initcall acpi_cm_sbs_init+0x0/0x8 returned 0 after 0 msecs calling pnp_init+0x0/0x20 Linux Plug and Play Support v0.97 (c) Adam Belay initcall pnp_init+0x0/0x20 returned 0 after 0 msecs calling pnpacpi_init+0x0/0x8c pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 7 msecs calling misc_init+0x0/0x98 initcall misc_init+0x0/0x98 returned 0 after 0 msecs calling cn_init+0x0/0xee initcall cn_init+0x0/0xee returned 0 after 3 msecs calling phy_init+0x0/0x31 initcall phy_init+0x0/0x31 returned 0 after 0 msecs calling init_scsi+0x0/0x91 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 0 msecs calling usb_init+0x0/0x122 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x122 returned 0 after 0 msecs calling serio_init+0x0/0x89 initcall serio_init+0x0/0x89 returned 0 after 0 msecs calling input_init+0x0/0x107 initcall input_init+0x0/0x107 returned 0 after 0 msecs calling rtc_init+0x0/0x70 initcall rtc_init+0x0/0x70 returned 0 after 0 msecs calling i2c_init+0x0/0x5f initcall i2c_init+0x0/0x5f returned 0 after 0 msecs calling power_supply_class_init+0x0/0x34 initcall power_supply_class_init+0x0/0x34 returned 0 after 0 msecs calling hwmon_init+0x0/0x3b initcall hwmon_init+0x0/0x3b returned 0 after 0 msecs calling thermal_init+0x0/0x51 initcall thermal_init+0x0/0x51 returned 0 after 0 msecs calling pci_acpi_init+0x0/0x96 PCI: Using ACPI for IRQ routing initcall pci_acpi_init+0x0/0x96 returned 0 after 0 msecs calling pci_legacy_init+0x0/0x11d initcall pci_legacy_init+0x0/0x11d returned 0 after 0 msecs calling pcibios_irq_init+0x0/0x4b2 initcall pcibios_irq_init+0x0/0x4b2 returned 0 after 0 msecs calling pcibios_init+0x0/0x74 initcall pcibios_init+0x0/0x74 returned 0 after 0 msecs calling proto_init+0x0/0x2e initcall proto_init+0x0/0x2e returned 0 after 0 msecs calling net_dev_init+0x0/0x153 initcall net_dev_init+0x0/0x153 returned 0 after 0 msecs calling neigh_init+0x0/0x71 initcall neigh_init+0x0/0x71 returned 0 after 0 msecs calling fib_rules_init+0x0/0xa6 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs calling genl_init+0x0/0xd9 initcall genl_init+0x0/0xd9 returned 0 after 15 msecs calling sysctl_init+0x0/0x2d initcall sysctl_init+0x0/0x2d returned 0 after 0 msecs calling pci_iommu_init+0x0/0x12 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture initcall pci_iommu_init+0x0/0x12 returned 0 after 3 msecs calling hpet_late_init+0x0/0x10d hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz initcall hpet_late_init+0x0/0x10d returned 0 after 0 msecs calling clocksource_done_booting+0x0/0x12 initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 msecs calling init_pipe_fs+0x0/0x4c initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs calling init_mnt_writers+0x0/0x4f initcall init_mnt_writers+0x0/0x4f returned 0 after 0 msecs calling eventpoll_init+0x0/0x85 initcall eventpoll_init+0x0/0x85 returned 0 after 0 msecs calling anon_inode_init+0x0/0x115 initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs calling acpi_rtc_init+0x0/0xf4 initcall acpi_rtc_init+0x0/0xf4 returned 0 after 0 msecs calling acpi_event_init+0x0/0x80 initcall acpi_event_init+0x0/0x80 returned 0 after 13 msecs calling pnp_system_init+0x0/0x12 system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x73f has been reserved system 00:01: ioport range 0x800-0x8fe has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0x9ff-0x9ff has been reserved system 00:01: ioport range 0xa00-0xafe has been reserved system 00:01: ioport range 0xaff-0xaff has been reserved system 00:01: ioport range 0xb00-0xbfe has been reserved system 00:01: ioport range 0xbff-0xbff has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved system 00:01: ioport range 0x3f8-0x3ff has been reserved system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved system 00:01: iomem range 0xf7df0000-0xf7df0fff has been reserved system 00:01: iomem range 0xfdef0000-0xfdef0fff has been reserved initcall pnp_system_init+0x0/0x12 returned 0 after 3 msecs calling chr_dev_init+0x0/0x98 initcall chr_dev_init+0x0/0x98 returned 0 after 0 msecs calling firmware_class_init+0x0/0x72 initcall firmware_class_init+0x0/0x72 returned 0 after 0 msecs calling loopback_init+0x0/0x12 initcall loopback_init+0x0/0x12 returned 0 after 0 msecs calling cpufreq_gov_performance_init+0x0/0x12 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 msecs calling cpufreq_gov_userspace_init+0x0/0x12 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 msecs calling init_acpi_pm_clocksource+0x0/0xa4 initcall init_acpi_pm_clocksource+0x0/0xa4 returned 0 after 0 msecs calling ssb_modinit+0x0/0x4a initcall ssb_modinit+0x0/0x4a returned 0 after 0 msecs calling pcibios_assign_resources+0x0/0x87 PCI: Bridge: 0000:00:09.0 IO window: 1000-2fff MEM window: 0xf7e00000-0xf7ffffff PREFETCH window: 0x00000000e8000000-0x00000000efffffff PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x0000000090000000-0x00000000900fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x0000000090000000-0x00000000900fffff PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x0000000090100000-0x00000000901fffff PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x0000000090100000-0x00000000901fffff PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: 0xfdc00000-0xfdcfffff PREFETCH window: 0x0000000090200000-0x00000000902fffff PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: 0xfdc00000-0xfdcfffff PREFETCH window: 0x0000000090200000-0x00000000902fffff PCI: Bridge: 0000:00:0e.0 IO window: 3000-3fff MEM window: 0xfdd00000-0xfddfffff PREFETCH window: 0x0000000090300000-0x00000000903fffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:04:00.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:06:00.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:42:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:41:00.0 IO window: 4000-4fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000084000000-0x00000000840fffff PCI: Bridge: 0000:40:0c.0 IO window: 4000-4fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000084000000-0x00000000840fffff PCI: Bridge: 0000:40:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:40:0c.0 to 64 PCI: Setting latency timer of device 0000:41:00.0 to 64 PCI: Setting latency timer of device 0000:40:0d.0 to 64 PCI: Setting latency timer of device 0000:40:0e.0 to 64 initcall pcibios_assign_resources+0x0/0x87 returned 0 after 11 msecs calling inet_init+0x0/0x350 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered initcall inet_init+0x0/0x350 returned 0 after 64 msecs calling af_unix_init+0x0/0x55 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 4 msecs calling populate_rootfs+0x0/0xea checking if image is initramfs... it is Freeing initrd memory: 1321k freed initcall populate_rootfs+0x0/0xea returned 0 after 162 msecs calling i8259A_init_sysfs+0x0/0x22 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 0 msecs calling vsyscall_init+0x0/0x6e initcall vsyscall_init+0x0/0x6e returned 0 after 0 msecs calling sbf_init+0x0/0xd7 initcall sbf_init+0x0/0xd7 returned 0 after 0 msecs calling i8237A_init_sysfs+0x0/0x22 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 0 msecs calling add_rtc_cmos+0x0/0x1d initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs calling cache_sysfs_init+0x0/0x5d initcall cache_sysfs_init+0x0/0x5d returned 0 after 1 msecs calling mce_init_device+0x0/0x85 initcall mce_init_device+0x0/0x85 returned 0 after 0 msecs calling periodic_mcheck_init+0x0/0x3f initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs calling thermal_throttle_init_device+0x0/0x83 initcall thermal_throttle_init_device+0x0/0x83 returned 0 after 0 msecs calling threshold_init_device+0x0/0x49 initcall threshold_init_device+0x0/0x49 returned 0 after 0 msecs calling msr_init+0x0/0xf2 initcall msr_init+0x0/0xf2 returned 0 after 0 msecs calling cpuid_init+0x0/0xf2 initcall cpuid_init+0x0/0xf2 returned 0 after 0 msecs calling microcode_init+0x0/0xbf microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor microcode: CPU2 not a capable Intel processor microcode: CPU3 not a capable Intel processor IA-32 Microcode Update Driver: v1.14a <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org> initcall microcode_init+0x0/0xbf returned 0 after 1 msecs calling init_lapic_sysfs+0x0/0x2d initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 msecs calling ioapic_init_sysfs+0x0/0x99 initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs calling add_pcspkr+0x0/0x43 initcall add_pcspkr+0x0/0x43 returned 0 after 0 msecs calling audit_classes_init+0x0/0xaf initcall audit_classes_init+0x0/0xaf returned 0 after 0 msecs calling init_vdso_vars+0x0/0x1e7 initcall init_vdso_vars+0x0/0x1e7 returned 0 after 0 msecs calling ia32_binfmt_init+0x0/0x14 initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs calling sysenter_setup+0x0/0x29f initcall sysenter_setup+0x0/0x29f returned 0 after 0 msecs calling init_aout_binfmt+0x0/0x12 initcall init_aout_binfmt+0x0/0x12 returned 0 after 0 msecs calling create_proc_profile+0x0/0x307 initcall create_proc_profile+0x0/0x307 returned 0 after 0 msecs calling ioresources_init+0x0/0x3c initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs calling uid_cache_init+0x0/0x69 initcall uid_cache_init+0x0/0x69 returned 0 after 0 msecs calling init_posix_timers+0x0/0xb6 initcall init_posix_timers+0x0/0xb6 returned 0 after 0 msecs calling init_posix_cpu_timers+0x0/0xd4 initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs calling nsproxy_cache_init+0x0/0x2d initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs calling timekeeping_init_device+0x0/0x22 initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 msecs calling init_clocksource_sysfs+0x0/0x50 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 msecs calling init_timer_list_procfs+0x0/0x2c initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs calling init_tstats_procfs+0x0/0x2c initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 msecs calling futex_init+0x0/0x63 initcall futex_init+0x0/0x63 returned 0 after 0 msecs calling proc_dma_init+0x0/0x22 initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs calling percpu_modinit+0x0/0x6f initcall percpu_modinit+0x0/0x6f returned 0 after 0 msecs calling kallsyms_init+0x0/0x25 initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs calling snapshot_device_init+0x0/0x12 initcall snapshot_device_init+0x0/0x12 returned 0 after 0 msecs calling crash_save_vmcoreinfo_init+0x0/0x42b initcall crash_save_vmcoreinfo_init+0x0/0x42b returned 0 after 0 msecs calling crash_notes_memory_init+0x0/0x3d initcall crash_notes_memory_init+0x0/0x3d returned 0 after 0 msecs calling ikconfig_init+0x0/0x39 initcall ikconfig_init+0x0/0x39 returned 0 after 0 msecs calling audit_init+0x0/0x14d audit: initializing netlink socket (disabled) type=2000 audit(1215277563.875:1): initialized initcall audit_init+0x0/0x14d returned 0 after 0 msecs calling audit_tree_init+0x0/0x49 initcall audit_tree_init+0x0/0x49 returned 0 after 0 msecs calling init_kprobes+0x0/0x103 initcall init_kprobes+0x0/0x103 returned 0 after 5 msecs calling relay_init+0x0/0x14 initcall relay_init+0x0/0x14 returned 0 after 0 msecs calling utsname_sysctl_init+0x0/0x14 initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs calling init_per_zone_pages_min+0x0/0x53 initcall init_per_zone_pages_min+0x0/0x53 returned 0 after 0 msecs calling pdflush_init+0x0/0x1d initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs calling kswapd_init+0x0/0x63 initcall kswapd_init+0x0/0x63 returned 0 after 0 msecs calling setup_vmstat+0x0/0x4a initcall setup_vmstat+0x0/0x4a returned 0 after 0 msecs calling procswaps_init+0x0/0x22 initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs calling hugetlb_init+0x0/0x98 Total HugeTLB memory allocated, 0 initcall hugetlb_init+0x0/0x98 returned 0 after 0 msecs calling init_tmpfs+0x0/0xda initcall init_tmpfs+0x0/0xda returned 0 after 0 msecs calling slab_sysfs_init+0x0/0xf0 initcall slab_sysfs_init+0x0/0xf0 returned 0 after 5 msecs calling fasync_init+0x0/0x2a initcall fasync_init+0x0/0x2a returned 0 after 0 msecs calling aio_setup+0x0/0x6e initcall aio_setup+0x0/0x6e returned 0 after 0 msecs calling inotify_setup+0x0/0x12 initcall inotify_setup+0x0/0x12 returned 0 after 0 msecs calling inotify_user_setup+0x0/0xb8 initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs calling init_sys32_ioctl+0x0/0x85 initcall init_sys32_ioctl+0x0/0x85 returned 0 after 0 msecs calling init_mbcache+0x0/0x14 initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs calling dnotify_init+0x0/0x2a initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs calling vmcore_init+0x0/0x894 initcall vmcore_init+0x0/0x894 returned 0 after 0 msecs calling configfs_init+0x0/0xb3 initcall configfs_init+0x0/0xb3 returned 0 after 0 msecs calling init_devpts_fs+0x0/0x3f initcall init_devpts_fs+0x0/0x3f returned 0 after 0 msecs calling init_ext3_fs+0x0/0x6a initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs calling journal_init+0x0/0x99 initcall journal_init+0x0/0x99 returned 0 after 0 msecs calling init_ext2_fs+0x0/0x6a initcall init_ext2_fs+0x0/0x6a returned 0 after 0 msecs calling init_ramfs_fs+0x0/0x12 initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs calling init_hugetlbfs_fs+0x0/0x98 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 msecs calling init_fat_fs+0x0/0x4f initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs calling init_msdos_fs+0x0/0x12 initcall init_msdos_fs+0x0/0x12 returned 0 after 0 msecs calling init_vfat_fs+0x0/0x12 initcall init_vfat_fs+0x0/0x12 returned 0 after 0 msecs calling init_iso9660_fs+0x0/0x6c initcall init_iso9660_fs+0x0/0x6c returned 0 after 0 msecs calling init_nfs_fs+0x0/0x10e initcall init_nfs_fs+0x0/0x10e returned 0 after 0 msecs calling init_nfsd+0x0/0xbb Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). initcall init_nfsd+0x0/0xbb returned 0 after 0 msecs calling init_nlm+0x0/0x22 initcall init_nlm+0x0/0x22 returned 0 after 0 msecs calling init_nls_cp437+0x0/0x12 initcall init_nls_cp437+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp850+0x0/0x12 initcall init_nls_cp850+0x0/0x12 returned 0 after 0 msecs calling init_nls_ascii+0x0/0x12 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_1+0x0/0x12 initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_15+0x0/0x12 initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 0 msecs calling init_nls_utf8+0x0/0x25 initcall init_nls_utf8+0x0/0x25 returned 0 after 0 msecs calling ipc_init+0x0/0x23 msgmni has been set to 16013 initcall ipc_init+0x0/0x23 returned 0 after 0 msecs calling ipc_sysctl_init+0x0/0x14 initcall ipc_sysctl_init+0x0/0x14 returned 0 after 0 msecs calling init_mqueue_fs+0x0/0xc6 initcall init_mqueue_fs+0x0/0xc6 returned 0 after 0 msecs calling crypto_algapi_init+0x0/0xd initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs calling blkcipher_module_init+0x0/0x2a initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs calling cryptomgr_init+0x0/0x12 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs calling hmac_module_init+0x0/0x12 initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs calling md5_mod_init+0x0/0x12 initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs calling sha1_generic_mod_init+0x0/0x12 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs calling crypto_cbc_module_init+0x0/0x12 initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs calling des_generic_mod_init+0x0/0x3f initcall des_generic_mod_init+0x0/0x3f returned 0 after 0 msecs calling cast5_mod_init+0x0/0x12 initcall cast5_mod_init+0x0/0x12 returned 0 after 0 msecs calling deflate_mod_init+0x0/0x12 initcall deflate_mod_init+0x0/0x12 returned 0 after 0 msecs calling crc32c_mod_init+0x0/0x12 initcall crc32c_mod_init+0x0/0x12 returned 0 after 0 msecs calling crypto_authenc_module_init+0x0/0x12 initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 msecs calling bsg_init+0x0/0x11f Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) initcall bsg_init+0x0/0x11f returned 0 after 0 msecs calling noop_init+0x0/0x14 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 0 msecs calling as_init+0x0/0x14 io scheduler anticipatory registered initcall as_init+0x0/0x14 returned 0 after 0 msecs calling deadline_init+0x0/0x14 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 0 msecs calling cfq_init+0x0/0x9d io scheduler cfq registered (default) initcall cfq_init+0x0/0x9d returned 0 after 0 msecs calling percpu_counter_startup+0x0/0x14 initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs calling pci_init+0x0/0x35 pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:00.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Enabling HT MSI Mapping pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Enabling HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Enabling HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping initcall pci_init+0x0/0x35 returned 0 after 3 msecs calling pci_proc_init+0x0/0x6a initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs calling pcie_portdrv_init+0x0/0x4d PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie01] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie01] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie01] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie01] Allocate Port Service[0000:00:0e.0:pcie03] PCI: Setting latency timer of device 0000:40:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0c.0:pcie00] Allocate Port Service[0000:40:0c.0:pcie01] Allocate Port Service[0000:40:0c.0:pcie03] PCI: Setting latency timer of device 0000:40:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0d.0:pcie00] Allocate Port Service[0000:40:0d.0:pcie01] Allocate Port Service[0000:40:0d.0:pcie03] PCI: Setting latency timer of device 0000:40:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0e.0:pcie00] Allocate Port Service[0000:40:0e.0:pcie01] Allocate Port Service[0000:40:0e.0:pcie03] initcall pcie_portdrv_init+0x0/0x4d returned 0 after 9 msecs calling fb_console_init+0x0/0x129 initcall fb_console_init+0x0/0x129 returned 0 after 0 msecs calling rivafb_init+0x0/0x1a5 initcall rivafb_init+0x0/0x1a5 returned 0 after 0 msecs calling nvidiafb_init+0x0/0x2b6 initcall nvidiafb_init+0x0/0x2b6 returned 0 after 0 msecs calling vt8623fb_init+0x0/0x5f initcall vt8623fb_init+0x0/0x5f returned 0 after 0 msecs calling vesafb_init+0x0/0x235 initcall vesafb_init+0x0/0x235 returned 0 after 0 msecs calling acpi_reserve_resources+0x0/0xeb initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs calling acpi_ac_init+0x0/0x45 initcall acpi_ac_init+0x0/0x45 returned 0 after 0 msecs calling acpi_button_init+0x0/0x5e input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] initcall acpi_button_init+0x0/0x5e returned 0 after 0 msecs calling acpi_fan_init+0x0/0x5e initcall acpi_fan_init+0x0/0x5e returned 0 after 0 msecs calling irqrouter_init_sysfs+0x0/0x38 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 0 msecs calling acpi_processor_init+0x0/0x113 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 initcall acpi_processor_init+0x0/0x113 returned 0 after 1 msecs calling acpi_container_init+0x0/0x42 initcall acpi_container_init+0x0/0x42 returned 0 after 1 msecs calling acpi_thermal_init+0x0/0x83 initcall acpi_thermal_init+0x0/0x83 returned 0 after 0 msecs calling rand_initialize+0x0/0x2c initcall rand_initialize+0x0/0x2c returned 0 after 0 msecs calling tty_init+0x0/0x1c5 initcall tty_init+0x0/0x1c5 returned 0 after 23 msecs calling pty_init+0x0/0x275 initcall pty_init+0x0/0x275 returned 0 after 0 msecs calling raw_init+0x0/0xd4 initcall raw_init+0x0/0xd4 returned 0 after 0 msecs calling hpet_init+0x0/0x6a hpet_resources: 0xfed00000 is busy initcall hpet_init+0x0/0x6a returned 0 after 0 msecs calling nvram_init+0x0/0x8a Non-volatile memory driver v1.2 initcall nvram_init+0x0/0x8a returned 0 after 0 msecs calling mod_init+0x0/0x1fb initcall mod_init+0x0/0x1fb returned -19 after 0 msecs calling mod_init+0x0/0xba initcall mod_init+0x0/0xba returned -19 after 0 msecs calling agp_init+0x0/0x26 Linux agpgart interface v0.103 initcall agp_init+0x0/0x26 returned 0 after 0 msecs calling agp_intel_init+0x0/0x29 initcall agp_intel_init+0x0/0x29 returned 0 after 0 msecs calling agp_via_init+0x0/0x29 initcall agp_via_init+0x0/0x29 returned 0 after 0 msecs calling drm_core_init+0x0/0xf9 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0xf9 returned 0 after 0 msecs calling r128_init+0x0/0x1e initcall r128_init+0x0/0x1e returned 0 after 0 msecs calling radeon_init+0x0/0x1e ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKY] -> GSI 18 (level, high) -> IRQ 18 [drm] Initialized radeon 1.29.0 20080528 on minor 0 initcall radeon_init+0x0/0x1e returned 0 after 2 msecs calling via_init+0x0/0x23 initcall via_init+0x0/0x23 returned 0 after 0 msecs calling ipmi_init_msghandler_mod+0x0/0xd ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 0 msecs calling init_ipmi_devintf+0x0/0xfa ipmi device interface initcall init_ipmi_devintf+0x0/0xfa returned 0 after 0 msecs calling init_ipmi_si+0x0/0x78e IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 Clocksource tsc unstable (delta = 55276278528 ns) ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16 Using irq 16 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized initcall init_ipmi_si+0x0/0x78e returned 0 after 191 msecs calling ipmi_wdog_init+0x0/0x12e IPMI Watchdog: driver initialized initcall ipmi_wdog_init+0x0/0x12e returned 0 after 6 msecs calling ipmi_poweroff_init+0x0/0x8d Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up IPMI poweroff: ATCA Detect mfg 0xB prod 0x0 IPMI poweroff: Unable to find a poweroff function that will work, giving up initcall ipmi_poweroff_init+0x0/0x8d returned 0 after 44 msecs calling hangcheck_init+0x0/0x8a Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). initcall hangcheck_init+0x0/0x8a returned 0 after 0 msecs calling cn_proc_init+0x0/0x3d initcall cn_proc_init+0x0/0x3d returned 0 after 0 msecs calling serial8250_init+0x0/0x131 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_init+0x0/0x131 returned 0 after 1 msecs calling serial8250_pnp_init+0x0/0x12 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_pnp_init+0x0/0x12 returned 0 after 0 msecs calling serial8250_pci_init+0x0/0x1b initcall serial8250_pci_init+0x0/0x1b returned 0 after 0 msecs calling topology_sysfs_init+0x0/0x49 initcall topology_sysfs_init+0x0/0x49 returned 0 after 0 msecs calling floppy_init+0x0/0xf0f Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found initcall floppy_init+0x0/0xf0f returned -19 after 2874 msecs calling brd_init+0x0/0x167 brd: module loaded initcall brd_init+0x0/0x167 returned 0 after 3 msecs calling bnx2_init+0x0/0x1b Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April 29, 2008) ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17 eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4 initcall bnx2_init+0x0/0x1b returned 0 after 48 msecs calling net_olddevs_init+0x0/0xa0 initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs calling b44_init+0x0/0x63 initcall b44_init+0x0/0x63 returned 0 after 0 msecs calling tun_init+0x0/0xa0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org> initcall tun_init+0x0/0xa0 returned 0 after 0 msecs calling init_netconsole+0x0/0x1b5 netconsole: local port 54556 netconsole: local IP 139.185.50.77 netconsole: interface eth0 netconsole: remote port 54556 netconsole: remote IP 139.185.50.76 netconsole: remote ethernet address 00:18:fe:34:1c:3d netconsole: device eth0 not up yet, forcing it bnx2: eth0: using MSI netconsole: carrier detect appears untrustworthy, waiting 4 seconds bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1b5 returned 0 after 4150 msecs calling scsi_tgt_init+0x0/0x7f initcall scsi_tgt_init+0x0/0x7f returned 0 after 0 msecs calling raid_init+0x0/0x12 initcall raid_init+0x0/0x12 returned 0 after 0 msecs calling spi_transport_init+0x0/0x2e initcall spi_transport_init+0x0/0x2e returned 0 after 0 msecs calling fc_transport_init+0x0/0x4c initcall fc_transport_init+0x0/0x4c returned 0 after 0 msecs calling iscsi_transport_init+0x0/0x118 Loading iSCSI transport class v2.0-869. initcall iscsi_transport_init+0x0/0x118 returned 0 after 0 msecs calling sas_transport_init+0x0/0xbb initcall sas_transport_init+0x0/0xbb returned 0 after 0 msecs calling sas_class_init+0x0/0x31 initcall sas_class_init+0x0/0x31 returned 0 after 0 msecs calling init_sd+0x0/0xff Driver 'sd' needs updating - please use bus_type methods initcall init_sd+0x0/0xff returned 0 after 0 msecs calling init_sg+0x0/0x153 initcall init_sg+0x0/0x153 returned 0 after 0 msecs calling mon_init+0x0/0x103 initcall mon_init+0x0/0x103 returned 0 after 0 msecs calling i8042_init+0x0/0x39f PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x39f returned 0 after 2 msecs calling serport_init+0x0/0x34 initcall serport_init+0x0/0x34 returned 0 after 0 msecs calling serio_raw_init+0x0/0x1b initcall serio_raw_init+0x0/0x1b returned 0 after 0 msecs calling mousedev_init+0x0/0x61 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x61 returned 0 after 0 msecs calling evdev_init+0x0/0x12 initcall evdev_init+0x0/0x12 returned 0 after 17 msecs calling atkbd_init+0x0/0x27 initcall atkbd_init+0x0/0x27 returned 0 after 0 msecs calling psmouse_init+0x0/0x6d initcall psmouse_init+0x0/0x6d returned 0 after 57 msecs calling pcspkr_init+0x0/0x12 input: PC Speaker as /class/input/input1 initcall pcspkr_init+0x0/0x12 returned 0 after 32 msecs calling uinput_init+0x0/0x12 initcall uinput_init+0x0/0x12 returned 0 after 0 msecs calling cmos_init+0x0/0x30 initcall cmos_init+0x0/0x30 returned 0 after 0 msecs calling i2c_dev_init+0x0/0x9f i2c /dev entries driver initcall i2c_dev_init+0x0/0x9f returned 0 after 0 msecs calling amd756_init+0x0/0x1b initcall amd756_init+0x0/0x1b returned 0 after 0 msecs calling i2c_amd8111_init+0x0/0x1b initcall i2c_amd8111_init+0x0/0x1b returned 0 after 0 msecs calling i2c_i801_init+0x0/0x1b initcall i2c_i801_init+0x0/0x1b returned 0 after 0 msecs calling i2c_i810_init+0x0/0x1b initcall i2c_i810_init+0x0/0x1b returned 0 after 0 msecs calling nforce2_init+0x0/0x1b initcall nforce2_init+0x0/0x1b returned 0 after 0 msecs calling i2c_piix4_init+0x0/0x1b initcall i2c_piix4_init+0x0/0x1b returned 0 after 0 msecs calling i2c_vt586b_init+0x0/0x1b initcall i2c_vt586b_init+0x0/0x1b returned 0 after 0 msecs calling i2c_vt596_init+0x0/0x1b initcall i2c_vt596_init+0x0/0x1b returned 0 after 0 msecs calling coretemp_init+0x0/0x158 initcall coretemp_init+0x0/0x158 returned -19 after 0 msecs calling k8temp_init+0x0/0x1b initcall k8temp_init+0x0/0x1b returned 0 after 0 msecs calling sm_via686a_init+0x0/0x1b initcall sm_via686a_init+0x0/0x1b returned 0 after 0 msecs calling vt1211_init+0x0/0x14e initcall vt1211_init+0x0/0x14e returned -19 after 0 msecs calling sm_vt8231_init+0x0/0x1b initcall sm_vt8231_init+0x0/0x1b returned 0 after 0 msecs calling watchdog_init+0x0/0xb4 SoftDog: cannot register miscdev on minor=130 (err=-16) initcall watchdog_init+0x0/0xb4 returned -16 after 0 msecs initcall watchdog_init+0x0/0xb4 returned with error code -16 calling edac_init+0x0/0x9d EDAC MC: Ver: 2.1.0 Jul 5 2008 initcall edac_init+0x0/0x9d returned 0 after 0 msecs calling i5000_init+0x0/0x41 initcall i5000_init+0x0/0x41 returned 0 after 0 msecs calling e752x_init+0x0/0x42 initcall e752x_init+0x0/0x42 returned 0 after 0 msecs calling i82975x_init+0x0/0xa0 initcall i82975x_init+0x0/0xa0 returned -19 after 0 msecs calling cpufreq_stats_init+0x0/0x8f initcall cpufreq_stats_init+0x0/0x8f returned 0 after 0 msecs calling cpufreq_gov_powersave_init+0x0/0x12 initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 msecs calling cpufreq_gov_dbs_init+0x0/0x46 initcall cpufreq_gov_dbs_init+0x0/0x46 returned 0 after 0 msecs calling cpufreq_gov_dbs_init+0x0/0x12 initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 msecs calling init_ladder+0x0/0x12 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 0 msecs calling hid_init+0x0/0x8 initcall hid_init+0x0/0x8 returned 0 after 0 msecs calling hid_init+0x0/0x61 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0x61 returned 0 after 0 msecs calling sysctl_core_init+0x0/0x12 initcall sysctl_core_init+0x0/0x12 returned 0 after 0 msecs calling flow_cache_init+0x0/0x1a7 initcall flow_cache_init+0x0/0x1a7 returned 0 after 0 msecs calling sysctl_ipv4_init+0x0/0x4e initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 0 msecs calling ipip_init+0x0/0x71 IPv4 over IPv4 tunneling driver initcall ipip_init+0x0/0x71 returned 0 after 0 msecs calling ipgre_init+0x0/0x71 GRE over IPv4 tunneling driver initcall ipgre_init+0x0/0x71 returned 0 after 0 msecs calling init_syncookies+0x0/0x19 initcall init_syncookies+0x0/0x19 returned 0 after 0 msecs calling ah4_init+0x0/0x68 initcall ah4_init+0x0/0x68 returned 0 after 0 msecs calling esp4_init+0x0/0x68 initcall esp4_init+0x0/0x68 returned 0 after 0 msecs calling ipcomp4_init+0x0/0x68 initcall ipcomp4_init+0x0/0x68 returned 0 after 0 msecs calling ipip_init+0x0/0x68 initcall ipip_init+0x0/0x68 returned 0 after 0 msecs calling xfrm4_beet_init+0x0/0x17 initcall xfrm4_beet_init+0x0/0x17 returned 0 after 0 msecs calling tunnel4_init+0x0/0x32 initcall tunnel4_init+0x0/0x32 returned 0 after 0 msecs calling xfrm4_transport_init+0x0/0x17 initcall xfrm4_transport_init+0x0/0x17 returned 0 after 0 msecs calling xfrm4_mode_tunnel_init+0x0/0x17 initcall xfrm4_mode_tunnel_init+0x0/0x17 returned 0 after 0 msecs calling inet_diag_init+0x0/0x69 initcall inet_diag_init+0x0/0x69 returned 0 after 0 msecs calling tcp_diag_init+0x0/0x12 initcall tcp_diag_init+0x0/0x12 returned 0 after 0 msecs calling bictcp_register+0x0/0x12 TCP bic registered initcall bictcp_register+0x0/0x12 returned 0 after 0 msecs calling xfrm_user_init+0x0/0x58 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x58 returned 0 after 0 msecs calling packet_init+0x0/0x47 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 0 msecs calling ipsec_pfkey_init+0x0/0x8c NET: Registered protocol family 15 initcall ipsec_pfkey_init+0x0/0x8c returned 0 after 0 msecs calling init_sunrpc+0x0/0x5d RPC: Registered udp transport module. RPC: Registered tcp transport module. initcall init_sunrpc+0x0/0x5d returned 0 after 0 msecs calling init_rpcsec_gss+0x0/0x38 initcall init_rpcsec_gss+0x0/0x38 returned 0 after 0 msecs calling init_kerberos_module+0x0/0x2f initcall init_kerberos_module+0x0/0x2f returned 0 after 0 msecs calling init_spkm3_module+0x0/0x2f initcall init_spkm3_module+0x0/0x2f returned 0 after 0 msecs calling powernowk8_init+0x0/0x8f powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 8218 processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 initcall powernowk8_init+0x0/0x8f returned 0 after 8 msecs calling acpi_cpufreq_init+0x0/0x8f initcall acpi_cpufreq_init+0x0/0x8f returned -16 after 0 msecs initcall acpi_cpufreq_init+0x0/0x8f returned with error code -16 calling centrino_init+0x0/0x33 initcall centrino_init+0x0/0x33 returned -19 after 0 msecs calling cpufreq_p4_init+0x0/0x60 initcall cpufreq_p4_init+0x0/0x60 returned -19 after 0 msecs calling hpet_insert_resource+0x0/0x23 initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 msecs calling lapic_insert_resource+0x0/0x40 initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 msecs calling init_lapic_nmi_sysfs+0x0/0x38 initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs calling ioapic_insert_resources+0x0/0x4f initcall ioapic_insert_resources+0x0/0x4f returned 0 after 0 msecs calling init_oops_id+0x0/0x23 initcall init_oops_id+0x0/0x23 returned 0 after 0 msecs calling disable_boot_consoles+0x0/0x3a initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 msecs calling pm_qos_power_init+0x0/0x61 initcall pm_qos_power_init+0x0/0x61 returned 0 after 0 msecs calling software_resume+0x0/0x13f initcall software_resume+0x0/0x13f returned -2 after 0 msecs initcall software_resume+0x0/0x13f returned with error code -2 calling debugfs_kprobe_init+0x0/0x89 initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 0 msecs calling taskstats_init+0x0/0x95 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 0 msecs calling random32_reseed+0x0/0x69 initcall random32_reseed+0x0/0x69 returned 0 after 0 msecs calling pci_sysfs_init+0x0/0x4c initcall pci_sysfs_init+0x0/0x4c returned 0 after 0 msecs calling acpi_wakeup_device_init+0x0/0xa5 initcall acpi_wakeup_device_init+0x0/0xa5 returned 0 after 0 msecs calling acpi_sleep_proc_init+0x0/0x55 initcall acpi_sleep_proc_init+0x0/0x55 returned 0 after 0 msecs calling seqgen_init+0x0/0xf initcall seqgen_init+0x0/0xf returned 0 after 0 msecs calling scsi_complete_async_scans+0x0/0xe5 initcall scsi_complete_async_scans+0x0/0xe5 returned 0 after 0 msecs calling rtc_hctosys+0x0/0x17b drivers/rtc/hctosys.c: unable to open rtc device (rtc0) initcall rtc_hctosys+0x0/0x17b returned -19 after 0 msecs calling edd_init+0x0/0x2f1 BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. initcall edd_init+0x0/0x2f1 returned -19 after 0 msecs calling pci_mmcfg_late_insert_resources+0x0/0x43 initcall pci_mmcfg_late_insert_resources+0x0/0x43 returned 0 after 0 msecs calling tcp_congestion_default+0x0/0x12 initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 msecs Freeing unused kernel memory: 344k freed Write protecting the kernel read-only data: 4568k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected insmod used greatest stack depth: 5360 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected insmod used greatest stack depth: 5336 bytes left ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000 usb 1-1: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54 ACPI: PCI Interrupt 0000:42:08.0[A] -> Link [LNKA] -> GSI 54 (level, high) -> IRQ 54 usb 1-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input2 cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 503 using DAC input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 7 ports detected blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d0: p1 p2 p3 p4 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d1: p1 p2 insmod used greatest stack depth: 4384 bytes left EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. modprobe used greatest stack depth: 3584 bytes left Emulex LightPulse Fibre Channel SCSI driver 8.2.6 Copyright(c) 2004-2008 Emulex. All rights reserved. ACPI: PCI Interrupt 0000:08:00.0[A] -> Link [LNKY] -> GSI 18 (level, high) -> IRQ 18 PCI: Setting latency timer of device 0000:08:00.0 to 64 scsi0 : on PCI bus 08 device 00 irq 18 lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x4 x2 scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:0:0: Attached scsi generic sg0 type 12 scsi 0:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:1:0: Attached scsi generic sg1 type 12 scsi 0:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 0:0:1:8: [sda] 2187605616 512-byte hardware sectors (1120054 MB) sd 0:0:1:8: [sda] Write Protect is off sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:8: [sda] 2187605616 512-byte hardware sectors (1120054 MB) sd 0:0:1:8: [sda] Write Protect is off sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:1:8: [sda] Attached SCSI disk sd 0:0:1:8: Attached scsi generic sg2 type 0 tg3.c:v3.92.1 (June 9, 2008) ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19 ACPI: PCI Interrupt 0000:07:04.0[A] -> <6>ACPI: PCI Interrupt 0000:08:00.1[B] -> Link [LNKZ] -> GSI 19 (level, high) -> IRQ 19 PCI: Setting latency timer of device 0000:08:00.1 to 64 Link [LNKZ] -> GSI 19 (level, high) -> IRQ 19 scsi1 : on PCI bus 08 device 01 irq 19 eth2: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:2f eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth2: dma_rwctrl[76148000] dma_mask[40-bit] ACPI: PCI Interrupt 0000:07:04.1[B] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16 eth3: Tigon3 [partno(011276-001) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:18:fe:34:1c:30 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth3: dma_rwctrl[76148000] dma_mask[40-bit] lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x4 x2 scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:0:0: Attached scsi generic sg3 type 12 scsi 1:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:1:0: Attached scsi generic sg4 type 12 scsi 1:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 1:0:1:8: [sdb] 2187605616 512-byte hardware sectors (1120054 MB) sd 1:0:1:8: [sdb] Write Protect is off sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:8: [sdb] 2187605616 512-byte hardware sectors (1120054 MB) sd 1:0:1:8: [sdb] Write Protect is off sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:1:8: [sdb] Attached SCSI disk sd 1:0:1:8: Attached scsi generic sg5 type 0 lp: driver loaded but no devices found EXT3 FS on cciss/c0d0p3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on cciss/c0d1p1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on cciss/c0d1p2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. Adding 8385920k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:8385920k rc.sysinit used greatest stack depth: 3568 bytes left warning: process `kudzu' used the deprecated sysctl system call with 1.23. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) rport-0:0-5: blocked FC remote port time out: removing rport rport-1:0-6: blocked FC remote port time out: removing rport bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. 6-1.test[16307]: segfault at 2713 ip 338ac04c36 sp 7fffcf628020 error 4 in librt-2.5.so[338ac00000+7000] 12-1.test[16435]: segfault at 2713 ip 338ac04c84 sp 7fffeb5ddfd0 error 4 in librt-2.5.so[338ac00000+7000] tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. 5-1.test[21266]: segfault at 601000 ip 338b00acd2 sp 7fff5ba23428 error 6 in libpthread-2.5.so[338b000000+15000] bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex 6-2.test[22932]: segfault at 2b7629778000 ip 400b1c sp 7fff81332c60 error 4 in 6-2.test[400000+1000] 6-1.test[22961]: segfault at 2ad6621fe000 ip 400a87 sp 7fff488ab1e0 error 6 in 6-1.test[400000+1000] 6-3.test[23086]: segfault at 2ac1be77c000 ip 400ace sp 7fffec32cc60 error 6 in 6-3.test[400000+1000] 5-1.test[23750]: segfault at 186a3 ip 338ac04b59 sp 7fff3b3bcdd0 error 4 in librt-2.5.so[338ac00000+7000] 2-2.test[26264]: segfault at 3a00000000 ip 3a00000000 sp 7fffb7ae4520 error 14 in ld-2.5.so[3a93400000+1a000] 2-3.test[27100]: segfault at 3a00000000 ip 3a00000000 sp 7ffff4aae4f0 error 14 in ld-2.5.so[3a93400000+1a000] 3-2.test[28610]: segfault at 412e3fe8 ip 3a938961e0 sp 412e4008 error 6 in libc-2.5.so[3a93800000+144000] 3-2.test[28612]: segfault at 4044ffe8 ip 3a938961e0 sp 40450008 error 6 in libc-2.5.so[3a93800000+144000] 3-2.test[28614]: segfault at 40b73fe8 ip 3a938961e0 sp 40b74008 error 6 in libc-2.5.so[3a93800000+144000] 3-2.test[28616]: segfault at 4053afe8 ip 3a938961e0 sp 4053b008 error 6 in libc-2.5.so[3a93800000+144000] 3-2.test[28618]: segfault at 40303fe8 ip 3a938961e0 sp 40304008 error 6 in libc-2.5.so[3a93800000+144000] 1-5.test[28729]: segfault at 40c5afe8 ip 3a938961e0 sp 40c5b008 error 6 in libc-2.5.so[3a93800000+144000] 1-5.test[28734]: segfault at 4146bfe8 ip 3a938961e0 sp 4146c008 error 6 in libc-2.5.so[3a93800000+144000] 6-1.test[20079]: segfault at 2713 ip 338ac04be6 sp 7fff1d656060 error 4 in librt-2.5.so[338ac00000+7000] tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! warning: process `scrashme' used the deprecated sysctl system call with bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! JFS: nTxBlock = 8192, nTxLock = 65536 tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. fsx-linux used greatest stack depth: 3440 bytes left SGI XFS with security attributes, large block/inode numbers, no debug enabled Filesystem "cciss/c0d0p4": Disabling barriers, not supported by the underlying device XFS mounting filesystem cciss/c0d0p4 Ending clean XFS mount for filesystem: cciss/c0d0p4 tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. fsx-linux used greatest stack depth: 2736 bytes left SGI XFS with security attributes, large block/inode numbers, no debug enabled Filesystem "cciss/c0d0p4": Disabling barriers, not supported by the underlying device XFS mounting filesystem cciss/c0d0p4 Ending clean XFS mount for filesystem: cciss/c0d0p4 bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex Hangcheck: hangcheck value past margin! fsx-linux used greatest stack depth: 2704 bytes left Hangcheck: hangcheck value past margin! SGI XFS with security attributes, large block/inode numbers, no debug enabled Filesystem "cciss/c0d0p4": Disabling barriers, not supported by the underlying device XFS mounting filesystem cciss/c0d0p4 Ending clean XFS mount for filesystem: cciss/c0d0p4 Hangcheck: hangcheck value past margin! tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex Hangcheck: hangcheck value past margin! ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using ordered data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names Hangcheck: hangcheck value past margin! ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using journaled data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using writeback data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names Hangcheck: hangcheck value past margin! ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using ordered data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using journaled data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using writeback data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using ordered data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names Hangcheck: hangcheck value past margin! ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using journaled data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex ReiserFS: cciss/c0d0p4: found reiserfs format "3.6" with standard journal ReiserFS: cciss/c0d0p4: using writeback data mode ReiserFS: cciss/c0d0p4: journal params: device cciss/c0d0p4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: cciss/c0d0p4: checking transaction log (cciss/c0d0p4) ReiserFS: cciss/c0d0p4: Using r5 hash to sort names Hangcheck: hangcheck value past margin! tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p4, internal journal EXT3-fs: mounted filesystem with writeback data mode. Hangcheck: hangcheck value past margin! kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p4, internal journal EXT3-fs: mounted filesystem with ordered data mode. tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p4, internal journal EXT3-fs: mounted filesystem with writeback data mode. Hangcheck: hangcheck value past margin! kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Hangcheck: hangcheck value past margin! kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p4, internal journal EXT3-fs: mounted filesystem with writeback data mode. Hangcheck: hangcheck value past margin! tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. tg3: eth3: Link is up at 1000 Mbps, full duplex. tg3: eth3: Flow control is off for TX and off for RX. OCFS2 Node Manager 1.5.0 OCFS2 1.5.0 JBD: Ignoring recovery information on journal kjournald starting. Commit interval 5 seconds ocfs2: Mounting device (104,4) on (node local, slot 0) with ordered data mode. Hangcheck: hangcheck value past margin! bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex Hangcheck: hangcheck value past margin! ocfs2: Unmounting device (104,4) on (node local) OCFS2 1.5.0 JBD: Ignoring recovery information on journal kjournald starting. Commit interval 5 seconds ocfs2: Mounting device (104,4) on (node local, slot 0) with ordered data mode. Hangcheck: hangcheck value past margin! ocfs2: Unmounting device (104,4) on (node local) tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is off for TX and off for RX. OCFS2 1.5.0 JBD: Ignoring recovery information on journal kjournald starting. Commit interval 5 seconds ocfs2: Mounting device (104,4) on (node local, slot 0) with ordered data mode. Hangcheck: hangcheck value past margin! fsx-linux[22097]: segfault at 3c375a0 ip 3a93875350 sp 7fffc6270bf8 error 4 in libc-2.5.so[3a93800000+144000] bnx2: eth1: using MSI bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex ocfs2: Unmounting device (104,4) on (node local) Hangcheck: hangcheck value past margin! audit(1215290021.399:1411): audit_pid=0 old=3709 auid=4294967295 ses=4294967295 res=1 [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #3: netcon-4557.log --] [-- Type: text/x-log; name="netcon-4557.log", Size: 11693 bytes --] Linux version 2.6.26-rc9 (root-HX1mpBeGVvl+EwfxrR/Ze0B3C2bhBk7L0E9HWUfgJXw@public.gmane.org) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Sun Jul 6 10:20:40 PDT 2008 Command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54557@139.185.50.77/eth0,54557-/jsH/OTgFlxns6bq1NedLA@public.gmane.org/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. Entering add_active_range(0, 1, 159) 0 entries of 256 used Entering add_active_range(0, 256, 523856) 1 entries of 256 used Entering add_active_range(0, 1048576, 2621439) 2 entries of 256 used max_pfn_mapped = 2621439 init_memory_mapping DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE50780, 005C (r1 HP A08 2 Ò\x04 162E) ACPI: FACP 7FE50800, 00F4 (r3 HP A08 2 Ò\x04 162E) ACPI: DSDT 7FE50900, 3F75 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS 7FE50100, 0040 ACPI: SPCR 7FE50140, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E) ACPI: MCFG 7FE501C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET 7FE50200, 0038 (r1 HP A08 2 Ò\x04 162E) ACPI: SPMI 7FE50240, 0040 (r5 HP ProLiant 1 Ò\x04 162E) ACPI: APIC 7FE50280, 00DE (r1 HP 00000083 2 0) ACPI: SRAT 7FE50380, 0110 (r1 AMD HAMMER 1 AMD 1) Entering add_active_range(0, 1, 159) 0 entries of 256 used Entering add_active_range(0, 256, 523856) 1 entries of 256 used Entering add_active_range(0, 1048576, 2621439) 2 entries of 256 used early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-81a62f] TEXT DATA BSS early res: 3 [7fd05000-7fe4f6a6] RAMDISK early res: 4 [9f400-fffff] BIOS reserved early res: 5 [8000-11fff] PGTABLE [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ffffe20002e00000-ffffe20008bfffff] PMD -> [ffff81000c000000-ffff810011dfffff] on node 0 Zone PFN ranges: DMA 1 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2621439 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 1 -> 159 0: 256 -> 523856 0: 1048576 -> 2621439 On node 0 totalpages: 2096621 DMA zone: 56 pages used for memmap DMA zone: 1673 pages reserved DMA zone: 2269 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 21504 pages used for memmap Normal zone: 1551359 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 0, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10228201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 36016 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059108 Kernel command line: root=LABEL=/ selinux=0 console=tty0 netconsole=54557-/jsH/OTgFlz2xuUunCWziw@public.gmane.org/eth0,54557-/jsH/OTgFlxns6bq1NedLA@public.gmane.org/00:18:FE:34:1C:3D debug ignore_loglevel 3 kex initcall_debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1004.624 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... Node 0: aperture @ c000000 size 64 MB Aperture pointing to e820 RAM. Ignoring. No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 PM: Registered nosave memory: 0000000004000000 - 0000000008000000 Memory: 8156604k/10485756k available (3339k kernel code, 229320k reserved, 1654k data, 264k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 2010.73 BogoMIPS (lpj=4021461) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20080321 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12557812 Detected 12.557 MHz APIC timer. Booting processor 1/2 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2009.34 BogoMIPS (lpj=4018691) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 2009.42 BogoMIPS (lpj=4018849) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 3/3 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 2009.37 BogoMIPS (lpj=4018744) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Brought up 4 CPUs Total of 4 processors activated (8038.87 BogoMIPS). khelper used greatest stack depth: 6136 bytes left calling init_cpufreq_transition_notifier_list+0x0/0x1b initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs calling net_ns_init+0x0/0x15d net_namespace: 368 bytes initcall net_ns_init+0x0/0x15d returned 0 after 0 msecs calling cpufreq_tsc+0x0/0x16 initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs calling init_smp_flush+0x0/0x49 initcall init_smp_flush+0x0/0x49 returned 0 after 0 msecs calling sysctl_init+0x0/0x32 initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs calling ksysfs_init+0x0/0xbb initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs calling init_jiffies_clocksource+0x0/0x12 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs calling pm_init+0x0/0x34 initcall pm_init+0x0/0x34 returned 0 after 0 msecs calling pm_disk_init+0x0/0x19 initcall pm_disk_init+0x0/0x19 returned 0 after 0 msecs calling swsusp_header_init+0x0/0x2c initcall swsusp_header_init+0x0/0x2c returned 0 after 0 msecs calling filelock_init+0x0/0x2e initcall filelock_init+0x0/0x2e returned 0 after 0 msecs calling init_misc_binfmt+0x0/0x3f initcall init_misc_binfmt+0x0/0x3f returned 0 after 0 msecs calling init_script_binfmt+0x0/0x12 initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs calling init_elf_binfmt+0x0/0x12 initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs calling init_compat_elf_binfmt+0x0/0x12 initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs calling debugfs_init+0x0/0x51 initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs calling random32_init+0x0/0x58 initcall random32_init+0x0/0x58 returned 0 after 0 msecs calling cpufreq_core_init+0x0/0x75 initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 msecs calling cpuidle_init+0x0/0x40 initcall cpuidle_init+0x0/0x40 returned 0 after 0 msecs calling sock_init+0x0/0x59 initcall sock_init+0x0/0x59 returned 0 after 0 msecs calling netpoll_init+0x0/0x31 initcall netpoll_init+0x0/0x31 returned 0 after 0 msecs calling netlink_proto_init+0x0/0x14d NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x14d returned 0 after 0 msecs calling bdi_class_init+0x0/0x3d initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs calling kobject_uevent_init+0x0/0x45 initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs calling pcibus_class_init+0x0/0x12 initcall pcibus_class_init+0x0/0x12 returned 0 after 0 msecs calling pci_driver_init+0x0/0x12 initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs calling backlight_class_init+0x0/0x49 initcall backlight_class_init+0x0/0x49 returned 0 after 0 msecs calling tty_class_init+0x0/0x2a initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs calling vtconsole_class_init+0x0/0xba initcall vtconsole_class_init+0x0/0xba returned 0 after 0 msecs calling early_fill_mp_bus_info+0x0/0x7b2 node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00,3f] on node 0 link 1 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [90000000, fddfffff] bus: 00 index 2 mmio: [80000000, 83ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fe000000, ffffffff] bus: 00 index 5 mmio: [280000000, fcffffffff] bus: [40,ff] on node 1 link 2 bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [fde00000, fdffffff] ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080707113917.6fda3f7d.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080707113917.6fda3f7d.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> @ 2008-07-07 22:40 ` Randy Dunlap 2008-07-08 0:24 ` Yinghai Lu [not found] ` <20080707154042.04bb492e.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> 0 siblings, 2 replies; 109+ messages in thread From: Randy Dunlap @ 2008-07-07 22:40 UTC (permalink / raw) To: lkml Cc: Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Kernel Testers List, Yinghai Lu On Mon, 7 Jul 2008 11:39:17 -0700 Randy Dunlap wrote: > On Mon, 7 Jul 2008 08:32:18 +0200 Ingo Molnar wrote: > > > > > * Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote: > > > > > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. > > > > > > Ok, then it wasn't the nr_zones thing. > > > > > > Since it seems to be repeatable for you, can you bisect it? > > > > one guess would be: > > > > | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 > > | Author: Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > | Date: Sun Apr 13 01:41:58 2008 -0700 > > | > > | x86: work around io allocation overlap of HT links > > > > but ... since CONFIG_NUMA makes it work, i'm not sure about that. > > > > Randy, could you post the full CONFIG_NUMA bootlog as well, does it show > > any difference in resource allocations? > > Good and bad boot logs are attached. There are several differences, but I don't > see any that are significant. > > I've started bisecting with: > > $ git bisect start > $ git bisect bad v2.6.26-rc1 > $ git bisect good v2.6.25 > > That's only about 1.29M lines of changes. git bisect and normal rebooting did not find a problem. I'll repeat this using kexec to boot the new kernel and see if that locates any issues... since I normally use kexec to load/test new kernels and that was how the failure occurred (occurs). --- ~Randy Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA http://linuxplumbersconf.org/ ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n 2008-07-07 22:40 ` Randy Dunlap @ 2008-07-08 0:24 ` Yinghai Lu [not found] ` <86802c440807071724i1a186879h479460ada28e1b26-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> [not found] ` <20080707154042.04bb492e.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> 1 sibling, 1 reply; 109+ messages in thread From: Yinghai Lu @ 2008-07-08 0:24 UTC (permalink / raw) To: Randy Dunlap Cc: lkml, Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Kernel Testers List On Mon, Jul 7, 2008 at 3:40 PM, Randy Dunlap <randy.dunlap@oracle.com> wrote: > On Mon, 7 Jul 2008 11:39:17 -0700 Randy Dunlap wrote: > >> On Mon, 7 Jul 2008 08:32:18 +0200 Ingo Molnar wrote: >> >> > >> > * Linus Torvalds <torvalds@linux-foundation.org> wrote: >> > >> > > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. >> > > >> > > Ok, then it wasn't the nr_zones thing. >> > > >> > > Since it seems to be repeatable for you, can you bisect it? >> > >> > one guess would be: >> > >> > | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 >> > | Author: Yinghai Lu <yhlu.kernel@gmail.com> >> > | Date: Sun Apr 13 01:41:58 2008 -0700 >> > | >> > | x86: work around io allocation overlap of HT links >> > >> > but ... since CONFIG_NUMA makes it work, i'm not sure about that. >> > >> > Randy, could you post the full CONFIG_NUMA bootlog as well, does it show >> > any difference in resource allocations? >> >> Good and bad boot logs are attached. There are several differences, but I don't >> see any that are significant. >> >> I've started bisecting with: >> >> $ git bisect start >> $ git bisect bad v2.6.26-rc1 >> $ git bisect good v2.6.25 >> >> That's only about 1.29M lines of changes. > > git bisect and normal rebooting did not find a problem. > > I'll repeat this using kexec to boot the new kernel and see if that > locates any issues... since I normally use kexec to load/test new kernels > and that was how the failure occurred (occurs). > same NON-NUMA kernel kexec NON-NUMA kernel? or other kernel kexex it? YH ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <86802c440807071724i1a186879h479460ada28e1b26-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <86802c440807071724i1a186879h479460ada28e1b26-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2008-07-08 5:28 ` Randy Dunlap [not found] ` <20080707222829.d79b6e2f.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Randy Dunlap @ 2008-07-08 5:28 UTC (permalink / raw) To: Yinghai Lu Cc: lkml, Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Kernel Testers List On Mon, 7 Jul 2008 17:24:16 -0700 Yinghai Lu wrote: > On Mon, Jul 7, 2008 at 3:40 PM, Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote: > > On Mon, 7 Jul 2008 11:39:17 -0700 Randy Dunlap wrote: > > > >> On Mon, 7 Jul 2008 08:32:18 +0200 Ingo Molnar wrote: > >> > >> > > >> > * Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote: > >> > > >> > > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. > >> > > > >> > > Ok, then it wasn't the nr_zones thing. > >> > > > >> > > Since it seems to be repeatable for you, can you bisect it? > >> > > >> > one guess would be: > >> > > >> > | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 > >> > | Author: Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > >> > | Date: Sun Apr 13 01:41:58 2008 -0700 > >> > | > >> > | x86: work around io allocation overlap of HT links > >> > > >> > but ... since CONFIG_NUMA makes it work, i'm not sure about that. > >> > > >> > Randy, could you post the full CONFIG_NUMA bootlog as well, does it show > >> > any difference in resource allocations? > >> > >> Good and bad boot logs are attached. There are several differences, but I don't > >> see any that are significant. > >> > >> I've started bisecting with: > >> > >> $ git bisect start > >> $ git bisect bad v2.6.26-rc1 > >> $ git bisect good v2.6.25 > >> > >> That's only about 1.29M lines of changes. > > > > git bisect and normal rebooting did not find a problem. > > > > I'll repeat this using kexec to boot the new kernel and see if that > > locates any issues... since I normally use kexec to load/test new kernels > > and that was how the failure occurred (occurs). > > > > same NON-NUMA kernel kexec NON-NUMA kernel? > > or other kernel kexex it? Ah. Good question. I hadn't noticed that. NUMA kernel kexec-ing a non-NUMA kernel now fails, but it worked in 2.6.25. --- ~Randy Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA http://linuxplumbersconf.org/ ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080707222829.d79b6e2f.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080707222829.d79b6e2f.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> @ 2008-07-08 7:07 ` Yinghai Lu 2008-07-08 15:44 ` Randy Dunlap 0 siblings, 1 reply; 109+ messages in thread From: Yinghai Lu @ 2008-07-08 7:07 UTC (permalink / raw) To: Randy Dunlap Cc: lkml, Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Kernel Testers List On Mon, Jul 7, 2008 at 10:28 PM, Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote: > On Mon, 7 Jul 2008 17:24:16 -0700 Yinghai Lu wrote: > >> On Mon, Jul 7, 2008 at 3:40 PM, Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote: >> > On Mon, 7 Jul 2008 11:39:17 -0700 Randy Dunlap wrote: >> > >> >> On Mon, 7 Jul 2008 08:32:18 +0200 Ingo Molnar wrote: >> >> >> >> > >> >> > * Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote: >> >> > >> >> > > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. >> >> > > >> >> > > Ok, then it wasn't the nr_zones thing. >> >> > > >> >> > > Since it seems to be repeatable for you, can you bisect it? >> >> > >> >> > one guess would be: >> >> > >> >> > | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 >> >> > | Author: Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> >> >> > | Date: Sun Apr 13 01:41:58 2008 -0700 >> >> > | >> >> > | x86: work around io allocation overlap of HT links >> >> > >> >> > but ... since CONFIG_NUMA makes it work, i'm not sure about that. >> >> > >> >> > Randy, could you post the full CONFIG_NUMA bootlog as well, does it show >> >> > any difference in resource allocations? >> >> >> >> Good and bad boot logs are attached. There are several differences, but I don't >> >> see any that are significant. >> >> >> >> I've started bisecting with: >> >> >> >> $ git bisect start >> >> $ git bisect bad v2.6.26-rc1 >> >> $ git bisect good v2.6.25 >> >> >> >> That's only about 1.29M lines of changes. >> > >> > git bisect and normal rebooting did not find a problem. >> > >> > I'll repeat this using kexec to boot the new kernel and see if that >> > locates any issues... since I normally use kexec to load/test new kernels >> > and that was how the failure occurred (occurs). >> > >> >> same NON-NUMA kernel kexec NON-NUMA kernel? >> >> or other kernel kexex it? > > Ah. Good question. I hadn't noticed that. > NUMA kernel kexec-ing a non-NUMA kernel now fails, but it worked in 2.6.25. > can you resend out that two config? YH ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n 2008-07-08 7:07 ` Yinghai Lu @ 2008-07-08 15:44 ` Randy Dunlap 2008-07-08 19:02 ` Yinghai Lu 0 siblings, 1 reply; 109+ messages in thread From: Randy Dunlap @ 2008-07-08 15:44 UTC (permalink / raw) To: Yinghai Lu Cc: lkml, Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Kernel Testers List [-- Attachment #1: Type: text/plain, Size: 2436 bytes --] On Tue, 8 Jul 2008 00:07:03 -0700 Yinghai Lu wrote: > On Mon, Jul 7, 2008 at 10:28 PM, Randy Dunlap <randy.dunlap@oracle.com> wrote: > > On Mon, 7 Jul 2008 17:24:16 -0700 Yinghai Lu wrote: > > > >> On Mon, Jul 7, 2008 at 3:40 PM, Randy Dunlap <randy.dunlap@oracle.com> wrote: > >> > On Mon, 7 Jul 2008 11:39:17 -0700 Randy Dunlap wrote: > >> > > >> >> On Mon, 7 Jul 2008 08:32:18 +0200 Ingo Molnar wrote: > >> >> > >> >> > > >> >> > * Linus Torvalds <torvalds@linux-foundation.org> wrote: > >> >> > > >> >> > > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. > >> >> > > > >> >> > > Ok, then it wasn't the nr_zones thing. > >> >> > > > >> >> > > Since it seems to be repeatable for you, can you bisect it? > >> >> > > >> >> > one guess would be: > >> >> > > >> >> > | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 > >> >> > | Author: Yinghai Lu <yhlu.kernel@gmail.com> > >> >> > | Date: Sun Apr 13 01:41:58 2008 -0700 > >> >> > | > >> >> > | x86: work around io allocation overlap of HT links > >> >> > > >> >> > but ... since CONFIG_NUMA makes it work, i'm not sure about that. > >> >> > > >> >> > Randy, could you post the full CONFIG_NUMA bootlog as well, does it show > >> >> > any difference in resource allocations? > >> >> > >> >> Good and bad boot logs are attached. There are several differences, but I don't > >> >> see any that are significant. > >> >> > >> >> I've started bisecting with: > >> >> > >> >> $ git bisect start > >> >> $ git bisect bad v2.6.26-rc1 > >> >> $ git bisect good v2.6.25 > >> >> > >> >> That's only about 1.29M lines of changes. > >> > > >> > git bisect and normal rebooting did not find a problem. > >> > > >> > I'll repeat this using kexec to boot the new kernel and see if that > >> > locates any issues... since I normally use kexec to load/test new kernels > >> > and that was how the failure occurred (occurs). > >> > > >> > >> same NON-NUMA kernel kexec NON-NUMA kernel? > >> > >> or other kernel kexex it? > > > > Ah. Good question. I hadn't noticed that. > > NUMA kernel kexec-ing a non-NUMA kernel now fails, but it worked in 2.6.25. > > > > can you resend out that two config? The host/first kernel that loads the second/failing kernel uses config-2625-work. The second kernel that hangs during boot uses kconfig.numa.bad . (both attached) --- ~Randy Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA http://linuxplumbersconf.org/ [-- Attachment #2: config-2625-work --] [-- Type: application/octet-stream, Size: 44031 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25 # Tue Jun 24 09:44:12 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y # CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y # # Processor type and features # # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_GOOD_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NUMA_EMU=y CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend # CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_EFI is not set # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x200000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # # Power management options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_P4_CLOCKMOD=y # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y # CONFIG_PCIEAER is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=m CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_CUBIC is not set # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=4 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_ARCMSR=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_SRP=y # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # # Controllers # CONFIG_IEEE1394_PCILYNX=m CONFIG_IEEE1394_OHCI1394=m # # Protocols # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_PCNET32_NAPI=y CONFIG_AMD8111_ETH=m CONFIG_AMD8111E_NAPI=y # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=m CONFIG_FORCEDETH_NAPI=y # CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_RHINE_NAPI=y # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000_NAPI=y CONFIG_E1000_DISABLE_PACKET_SPLIT=y CONFIG_E1000E=m CONFIG_E1000E_ENABLED=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set # CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set CONFIG_NET_FC=y CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set # CONFIG_HPET_MMAP is not set CONFIG_HANGCHECK_TIMER=y # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCF=y CONFIG_I2C_ALGOPCA=y # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=y # CONFIG_I2C_AMD756_S4882 is not set CONFIG_I2C_AMD8111=y CONFIG_I2C_I801=y CONFIG_I2C_I810=y CONFIG_I2C_PIIX4=y CONFIG_I2C_NFORCE2=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set CONFIG_I2C_VIA=y CONFIG_I2C_VIAPRO=y # CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set CONFIG_SENSORS_K8TEMP=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_CORETEMP=y # CONFIG_SENSORS_IBMPEX is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_VIA686A=y CONFIG_SENSORS_VT1211=y CONFIG_SENSORS_VT8231=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=y # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_ITCO_WDT is not set # CONFIG_IT8712F_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83697HF_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y # CONFIG_SSB_B43_PCI_BRIDGE is not set # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set CONFIG_AGP_VIA=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=y CONFIG_DRM_RADEON=y # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set CONFIG_DRM_VIA=y # CONFIG_DRM_SAVAGE is not set CONFIG_VGASTATE=y # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y CONFIG_FB_SVGALIB=y # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_EFI is not set # CONFIG_FB_HECUBA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set # CONFIG_FB_NVIDIA_BACKLIGHT is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_RIVA_BACKLIGHT=y # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set CONFIG_FB_VT8623=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set CONFIG_USB_SERIAL=m # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_E752X=y CONFIG_EDAC_I82975X=y # CONFIG_EDAC_I3000 is not set CONFIG_EDAC_I5000=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # # Conflicting RTC option has been selected, check GEN_RTC and RTC # CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # CONFIG_EDD=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=y # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_SLUB_DEBUG_ON is not set CONFIG_SLUB_STATS=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_X86_MPPARSE=y # CONFIG_IOMMU_DEBUG is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_SECURITY_FILE_CAPABILITIES=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y # CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_ECB is not set CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set CONFIG_CRYPTO_CAST5=y # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y [-- Attachment #3: kconfig.numa.bad --] [-- Type: application/octet-stream, Size: 45856 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc9 # Sun Jul 6 10:17:59 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y # CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y # CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y # # Processor type and features # # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST_BOOTPARAM=y CONFIG_MEMTEST_BOOTPARAM_VALUE=0 # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_GOOD_APIC=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y CONFIG_NR_CPUS=8 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend # CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_X86_PAT is not set # CONFIG_EFI is not set # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x200000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_P4_CLOCKMOD=y # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y # CONFIG_PCIEAER is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=m CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_CUBIC is not set # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_EEEPC_LAPTOP is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=4 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_ARCMSR=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_SRP=y # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m CONFIG_IEEE1394_OHCI1394=m CONFIG_IEEE1394_PCILYNX=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_VERBOSEDEBUG=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m CONFIG_AMD8111E_NAPI=y # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=y CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=m CONFIG_FORCEDETH_NAPI=y # CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_RHINE_NAPI=y # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y CONFIG_E1000_DISABLE_PACKET_SPLIT=y # CONFIG_E1000E is not set # CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set # CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set CONFIG_NET_FC=y CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 CONFIG_HPET=y # CONFIG_HPET_MMAP is not set CONFIG_HANGCHECK_TIMER=y # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=y # CONFIG_I2C_AMD756_S4882 is not set CONFIG_I2C_AMD8111=y CONFIG_I2C_I801=y CONFIG_I2C_I810=y CONFIG_I2C_PIIX4=y CONFIG_I2C_NFORCE2=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set CONFIG_I2C_VIA=y CONFIG_I2C_VIAPRO=y # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set CONFIG_SENSORS_K8TEMP=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_CORETEMP=y # CONFIG_SENSORS_IBMAEM is not set # CONFIG_SENSORS_IBMPEX is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_VIA686A=y CONFIG_SENSORS_VT1211=y CONFIG_SENSORS_VT8231=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=y # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_ITCO_WDT is not set # CONFIG_IT8712F_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83697HF_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=y CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y # CONFIG_SSB_B43_PCI_BRIDGE is not set # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # # Multimedia devices # # # Multimedia core support # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set CONFIG_AGP_VIA=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=y CONFIG_DRM_RADEON=y # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set CONFIG_DRM_VIA=y # CONFIG_DRM_SAVAGE is not set CONFIG_VGASTATE=y # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_SVGALIB=y # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_EFI is not set # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set # CONFIG_FB_NVIDIA_BACKLIGHT is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_RIVA_BACKLIGHT=y # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set CONFIG_FB_VT8623=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set CONFIG_USB_SERIAL=m # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_E752X=y CONFIG_EDAC_I82975X=y # CONFIG_EDAC_I3000 is not set CONFIG_EDAC_I5000=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # # Firmware Drivers # CONFIG_EDD=y # CONFIG_EDD_OFF is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=y # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DIRECT_GBPAGES is not set # CONFIG_DEBUG_RODATA_TEST is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_X86_MPPARSE=y # CONFIG_IOMMU_DEBUG is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=y # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n 2008-07-08 15:44 ` Randy Dunlap @ 2008-07-08 19:02 ` Yinghai Lu 0 siblings, 0 replies; 109+ messages in thread From: Yinghai Lu @ 2008-07-08 19:02 UTC (permalink / raw) To: Randy Dunlap Cc: lkml, Ingo Molnar, Linus Torvalds, Rafael J. Wysocki, Kernel Testers List [-- Attachment #1: Type: text/plain, Size: 2531 bytes --] On Tue, Jul 8, 2008 at 8:44 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote: > On Tue, 8 Jul 2008 00:07:03 -0700 Yinghai Lu wrote: > >> On Mon, Jul 7, 2008 at 10:28 PM, Randy Dunlap <randy.dunlap@oracle.com> wrote: >> > On Mon, 7 Jul 2008 17:24:16 -0700 Yinghai Lu wrote: >> > >> >> On Mon, Jul 7, 2008 at 3:40 PM, Randy Dunlap <randy.dunlap@oracle.com> wrote: >> >> > On Mon, 7 Jul 2008 11:39:17 -0700 Randy Dunlap wrote: >> >> > >> >> >> On Mon, 7 Jul 2008 08:32:18 +0200 Ingo Molnar wrote: >> >> >> >> >> >> > >> >> >> > * Linus Torvalds <torvalds@linux-foundation.org> wrote: >> >> >> > >> >> >> > > > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. >> >> >> > > >> >> >> > > Ok, then it wasn't the nr_zones thing. >> >> >> > > >> >> >> > > Since it seems to be repeatable for you, can you bisect it? >> >> >> > >> >> >> > one guess would be: >> >> >> > >> >> >> > | commit e8ee6f0ae5cd860e8e6c02807edfa3c1fa01bcb5 >> >> >> > | Author: Yinghai Lu <yhlu.kernel@gmail.com> >> >> >> > | Date: Sun Apr 13 01:41:58 2008 -0700 >> >> >> > | >> >> >> > | x86: work around io allocation overlap of HT links >> >> >> > >> >> >> > but ... since CONFIG_NUMA makes it work, i'm not sure about that. >> >> >> > >> >> >> > Randy, could you post the full CONFIG_NUMA bootlog as well, does it show >> >> >> > any difference in resource allocations? >> >> >> >> >> >> Good and bad boot logs are attached. There are several differences, but I don't >> >> >> see any that are significant. >> >> >> >> >> >> I've started bisecting with: >> >> >> >> >> >> $ git bisect start >> >> >> $ git bisect bad v2.6.26-rc1 >> >> >> $ git bisect good v2.6.25 >> >> >> >> >> >> That's only about 1.29M lines of changes. >> >> > >> >> > git bisect and normal rebooting did not find a problem. >> >> > >> >> > I'll repeat this using kexec to boot the new kernel and see if that >> >> > locates any issues... since I normally use kexec to load/test new kernels >> >> > and that was how the failure occurred (occurs). >> >> > >> >> >> >> same NON-NUMA kernel kexec NON-NUMA kernel? >> >> >> >> or other kernel kexex it? >> > >> > Ah. Good question. I hadn't noticed that. >> > NUMA kernel kexec-ing a non-NUMA kernel now fails, but it worked in 2.6.25. >> > >> >> can you resend out that two config? > > The host/first kernel that loads the second/failing kernel uses > config-2625-work. The second kernel that hangs during boot uses > kconfig.numa.bad . (both attached) > too bad, still can not dupicate here with your sequence. YH [-- Attachment #2: config_2.6.25_numa --] [-- Type: application/octet-stream, Size: 44113 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25 # Tue Jul 8 11:47:34 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y # CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y # # Processor type and features # # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_GOOD_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NUMA_EMU=y CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend # CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_EFI is not set # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x200000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # # Power management options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_P4_CLOCKMOD=y # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y # CONFIG_PCIEAER is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=m CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_CUBIC is not set # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=4 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_ARCMSR=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_SRP=y # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # # Controllers # CONFIG_IEEE1394_PCILYNX=m CONFIG_IEEE1394_OHCI1394=m # # Protocols # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_PCNET32_NAPI=y CONFIG_AMD8111_ETH=m CONFIG_AMD8111E_NAPI=y # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=y CONFIG_FORCEDETH_NAPI=y # CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_RHINE_NAPI=y # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000_NAPI=y CONFIG_E1000_DISABLE_PACKET_SPLIT=y CONFIG_E1000E=m CONFIG_E1000E_ENABLED=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set # CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set CONFIG_NET_FC=y CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set # CONFIG_HPET_MMAP is not set CONFIG_HANGCHECK_TIMER=y # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCF=y CONFIG_I2C_ALGOPCA=y # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=y # CONFIG_I2C_AMD756_S4882 is not set CONFIG_I2C_AMD8111=y CONFIG_I2C_I801=y CONFIG_I2C_I810=y CONFIG_I2C_PIIX4=y CONFIG_I2C_NFORCE2=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set CONFIG_I2C_VIA=y CONFIG_I2C_VIAPRO=y # CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set CONFIG_SENSORS_K8TEMP=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_CORETEMP=y # CONFIG_SENSORS_IBMPEX is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_VIA686A=y CONFIG_SENSORS_VT1211=y CONFIG_SENSORS_VT8231=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=y # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_ITCO_WDT is not set # CONFIG_IT8712F_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83697HF_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y # CONFIG_SSB_B43_PCI_BRIDGE is not set # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set CONFIG_AGP_VIA=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=y CONFIG_DRM_RADEON=y # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set CONFIG_DRM_VIA=y # CONFIG_DRM_SAVAGE is not set CONFIG_VGASTATE=y # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y CONFIG_FB_SVGALIB=y # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_EFI is not set # CONFIG_FB_HECUBA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set # CONFIG_FB_NVIDIA_BACKLIGHT is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_RIVA_BACKLIGHT=y # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set CONFIG_FB_VT8623=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set CONFIG_USB_SERIAL=m # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_E752X=y CONFIG_EDAC_I82975X=y # CONFIG_EDAC_I3000 is not set CONFIG_EDAC_I5000=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # # Conflicting RTC option has been selected, check GEN_RTC and RTC # CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # CONFIG_EDD=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y # CONFIG_ROOT_NFS is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=y # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_SLUB_DEBUG_ON is not set CONFIG_SLUB_STATS=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_X86_MPPARSE=y # CONFIG_IOMMU_DEBUG is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_SECURITY_FILE_CAPABILITIES=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y # CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_ECB is not set CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set CONFIG_CRYPTO_CAST5=y # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y [-- Attachment #3: config_tip_no_numa --] [-- Type: application/octet-stream, Size: 46748 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc9 # Tue Jul 8 11:49:18 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y # CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y # CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y # # Processor type and features # # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST=y # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_GOOD_APIC=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_X86_DS=y CONFIG_X86_PTRACE_BTS=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set # CONFIG_AMD_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_MAXSMP is not set CONFIG_NR_CPUS=8 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xffffc10000000000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend # CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 # CONFIG_X86_PAT is not set # CONFIG_EFI is not set # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x200000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_P4_CLOCKMOD=y # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y # CONFIG_PCIEAER is not set # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=y CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=m CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_CUBIC is not set # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_EEEPC_LAPTOP is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=4 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_ARCMSR=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_SRP=y # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m CONFIG_IEEE1394_OHCI1394=m CONFIG_IEEE1394_PCILYNX=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_VERBOSEDEBUG=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m CONFIG_AMD8111E_NAPI=y # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=y CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=y CONFIG_FORCEDETH_NAPI=y # CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_RHINE_NAPI=y # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y CONFIG_E1000_DISABLE_PACKET_SPLIT=y # CONFIG_E1000E is not set # CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set # CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set CONFIG_NET_FC=y CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set CONFIG_INPUT_UINPUT=y # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_PANIC_STRING=y CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 CONFIG_HPET=y # CONFIG_HPET_MMAP is not set CONFIG_HANGCHECK_TIMER=y # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=y # CONFIG_I2C_AMD756_S4882 is not set CONFIG_I2C_AMD8111=y CONFIG_I2C_I801=y CONFIG_I2C_I810=y CONFIG_I2C_PIIX4=y CONFIG_I2C_NFORCE2=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set CONFIG_I2C_VIA=y CONFIG_I2C_VIAPRO=y # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set CONFIG_SENSORS_K8TEMP=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_CORETEMP=y # CONFIG_SENSORS_IBMAEM is not set # CONFIG_SENSORS_IBMPEX is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_VIA686A=y CONFIG_SENSORS_VT1211=y CONFIG_SENSORS_VT8231=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=y # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_ITCO_WDT is not set # CONFIG_IT8712F_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83697HF_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=y CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y # CONFIG_SSB_B43_PCI_BRIDGE is not set # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # # Multimedia devices # # # Multimedia core support # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set CONFIG_AGP_VIA=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=y CONFIG_DRM_RADEON=y # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set CONFIG_DRM_VIA=y # CONFIG_DRM_SAVAGE is not set CONFIG_VGASTATE=y # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_SVGALIB=y # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_EFI is not set # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set # CONFIG_FB_NVIDIA_BACKLIGHT is not set CONFIG_FB_RIVA=y # CONFIG_FB_RIVA_I2C is not set # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_RIVA_BACKLIGHT=y # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set CONFIG_FB_VT8623=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set CONFIG_USB_SERIAL=m # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_E752X=y CONFIG_EDAC_I82975X=y # CONFIG_EDAC_I3000 is not set CONFIG_EDAC_I5000=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # # Firmware Drivers # CONFIG_EDD=y # CONFIG_EDD_OFF is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set # CONFIG_ROOT_NFS is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=y # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_TRACING=y # CONFIG_FTRACE is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_NONPROMISC_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DIRECT_GBPAGES is not set # CONFIG_DEBUG_RODATA_TEST is not set # CONFIG_DEBUG_NX_TEST is not set # CONFIG_IOMMU_DEBUG is not set CONFIG_MMIOTRACE_HOOKS=y CONFIG_MMIOTRACE=y # CONFIG_MMIOTRACE_TEST is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=y # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080707154042.04bb492e.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080707154042.04bb492e.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> @ 2008-07-08 5:16 ` Ingo Molnar [not found] ` <20080708051629.GA12595-X9Un+BFzKDI@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Ingo Molnar @ 2008-07-08 5:16 UTC (permalink / raw) To: Randy Dunlap Cc: lkml, Linus Torvalds, Rafael J. Wysocki, Kernel Testers List, Yinghai Lu * Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote: > > $ git bisect start > > $ git bisect bad v2.6.26-rc1 > > $ git bisect good v2.6.25 > > > > That's only about 1.29M lines of changes. > > git bisect and normal rebooting did not find a problem. > > I'll repeat this using kexec to boot the new kernel and see if that > locates any issues... since I normally use kexec to load/test new > kernels and that was how the failure occurred (occurs). ah, so the hang only occurs if you kexec a post-v2.6.25 kernel? (from any other kernel, or from a post-v2.6.25 kernel?) Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080708051629.GA12595-X9Un+BFzKDI@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080708051629.GA12595-X9Un+BFzKDI@public.gmane.org> @ 2008-07-08 15:39 ` Randy Dunlap 0 siblings, 0 replies; 109+ messages in thread From: Randy Dunlap @ 2008-07-08 15:39 UTC (permalink / raw) To: Ingo Molnar Cc: lkml, Linus Torvalds, Rafael J. Wysocki, Kernel Testers List, Yinghai Lu On Tue, 8 Jul 2008 07:16:29 +0200 Ingo Molnar wrote: > > * Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote: > > > > $ git bisect start > > > $ git bisect bad v2.6.26-rc1 > > > $ git bisect good v2.6.25 > > > > > > That's only about 1.29M lines of changes. > > > > git bisect and normal rebooting did not find a problem. > > > > I'll repeat this using kexec to boot the new kernel and see if that > > locates any issues... since I normally use kexec to load/test new > > kernels and that was how the failure occurred (occurs). > > ah, so the hang only occurs if you kexec a post-v2.6.25 kernel? (from > any other kernel, or from a post-v2.6.25 kernel?) Host (first) kernel is 2.6.25 with NUMA=y. kexec of 2.6.25 with NUMA=n works, kexec of 2.6.26-rc[123456789] with NUMA=n fails/hangs. kexec of 2.6.26-rc* with NUMA=y works. kernel configs will be in next email reply to YH. --- ~Randy Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA http://linuxplumbersconf.org/ ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080706111750.a6d77e81.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> 2008-07-06 18:33 ` Linus Torvalds @ 2008-07-07 6:42 ` Ingo Molnar [not found] ` <20080707064227.GA27622-X9Un+BFzKDI@public.gmane.org> 1 sibling, 1 reply; 109+ messages in thread From: Ingo Molnar @ 2008-07-07 6:42 UTC (permalink / raw) To: Randy Dunlap Cc: Rafael J. Wysocki, torvalds, Linux Kernel Mailing List, Kernel Testers List, Yinghai Lu * Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote: > This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. one thing i dont see you having followed up on is whether tip/master works fine: http://lkml.org/lkml/2008/6/11/355 (or, whether linux-next works fine with the same !NUMA config.) i.e. whether this is a genuine new problem or something we already fixed. (just didnt realize the upstream relevance of) ( if tip/master works fine then it would be very useful to do an 'inverse bisection' for the fix. ) Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080707064227.GA27622-X9Un+BFzKDI@public.gmane.org>]
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n [not found] ` <20080707064227.GA27622-X9Un+BFzKDI@public.gmane.org> @ 2008-07-07 7:15 ` Yinghai Lu 2008-07-07 7:24 ` Ingo Molnar 0 siblings, 1 reply; 109+ messages in thread From: Yinghai Lu @ 2008-07-07 7:15 UTC (permalink / raw) To: Ingo Molnar Cc: Randy Dunlap, Rafael J. Wysocki, torvalds, Linux Kernel Mailing List, Kernel Testers List On Sun, Jul 6, 2008 at 11:42 PM, Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org> wrote: > > * Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote: > >> This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. > > one thing i dont see you having followed up on is whether tip/master > works fine: > > http://lkml.org/lkml/2008/6/11/355 in the response to me, he said tip/master has the same problem YH ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n 2008-07-07 7:15 ` Yinghai Lu @ 2008-07-07 7:24 ` Ingo Molnar 0 siblings, 0 replies; 109+ messages in thread From: Ingo Molnar @ 2008-07-07 7:24 UTC (permalink / raw) To: Yinghai Lu Cc: Randy Dunlap, Rafael J. Wysocki, torvalds, Linux Kernel Mailing List, Kernel Testers List * Yinghai Lu <yhlu.kernel@gmail.com> wrote: > On Sun, Jul 6, 2008 at 11:42 PM, Ingo Molnar <mingo@elte.hu> wrote: > > > > * Randy Dunlap <randy.dunlap@oracle.com> wrote: > > > >> This still happens with 2.6.26-rc9. Using CONFIG_NUMA=y boots OK. > > > > one thing i dont see you having followed up on is whether tip/master > > works fine: > > > > http://lkml.org/lkml/2008/6/11/355 > > in the response to me, he said tip/master has the same problem ok, so an unfixed problem. Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11035] System hangs on 2.6.26-rc8 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (24 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-10 12:29 ` Roman Mindalev 2008-07-12 15:48 ` Roman Mindalev 2008-07-06 11:45 ` [Bug #11006] 2.6.26-rc6: pcmcia stopped working Rafael J. Wysocki ` (15 subsequent siblings) 41 siblings, 2 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Roman Mindalev This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11035 Subject : System hangs on 2.6.26-rc8 Submitter : Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> Date : 2008-07-02 14:25 (5 days old) References : http://marc.info/?l=linux-kernel&m=121500871414995&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #11035] System hangs on 2.6.26-rc8 2008-07-06 11:45 ` [Bug #11035] System hangs on 2.6.26-rc8 Rafael J. Wysocki @ 2008-07-10 12:29 ` Roman Mindalev [not found] ` <487600B3.2010008-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> 2008-07-12 15:48 ` Roman Mindalev 1 sibling, 1 reply; 109+ messages in thread From: Roman Mindalev @ 2008-07-10 12:29 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: Linux Kernel Mailing List, Kernel Testers List [-- Attachment #1: Type: text/plain, Size: 1857 bytes --] Rafael J. Wysocki wrote: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11035 > Subject : System hangs on 2.6.26-rc8 > Submitter : Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> > Date : 2008-07-02 14:25 (5 days old) > References : http://marc.info/?l=linux-kernel&m=121500871414995&w=4 > > > I have this problem with 2.6.25 too. Unfortunately, I can't check 2.6.24. With config from 2.6.26-rc8 I got error of compiling: LD .tmp_vmlinux1 kernel/built-in.o: In function `timespec_add_ns': /usr/src/kernels/linux-2.6.24/include/linux/time.h:179: undefined reference to `__umoddi3' kernel/built-in.o: In function `do_gettimeofday': /usr/src/kernels/linux-2.6.24/kernel/time/timekeeping.c:131: undefined reference to `__udivdi3' /usr/src/kernels/linux-2.6.24/kernel/time/timekeeping.c:132: undefined reference to `__umoddi3' kernel/built-in.o: In function `timespec_add_ns': /usr/src/kernels/linux-2.6.24/include/linux/time.h:174: undefined reference to `__udivdi3' /usr/src/kernels/linux-2.6.24/include/linux/time.h:179: undefined reference to `__umoddi3' /usr/src/kernels/linux-2.6.24/include/linux/time.h:174: undefined reference to `__udivdi3' /usr/src/kernels/linux-2.6.24/include/linux/time.h:179: undefined reference to `__umoddi3' /usr/src/kernels/linux-2.6.24/include/linux/time.h:174: undefined reference to `__udivdi3' /usr/src/kernels/linux-2.6.24/include/linux/time.h:179: undefined reference to `__umoddi3' make: *** [.tmp_vmlinux1] Error 1 I attached 3 configs, from 2.6.26-rc8 (where I in first time got hang of system as result of SIGSEGV), from 2.6.25, and from 2.6.24 [-- Attachment #2: config-2.6.24.tar.gz --] [-- Type: application/x-gzip, Size: 11587 bytes --] [-- Attachment #3: config-2.6.25.tar.gz --] [-- Type: application/x-gzip, Size: 12337 bytes --] [-- Attachment #4: config-2.6.26-rc8.tar.gz --] [-- Type: application/x-gzip, Size: 12877 bytes --] ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <487600B3.2010008-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org>]
* Re: [Bug #11035] System hangs on 2.6.26-rc8 [not found] ` <487600B3.2010008-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> @ 2008-07-10 18:08 ` Luiz Fernando N. Capitulino [not found] ` <20080710150841.139c2a71-nIupHZaCssooJnjsDhvDDvd9D2ou9A/h@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Luiz Fernando N. Capitulino @ 2008-07-10 18:08 UTC (permalink / raw) To: Roman Mindalev Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List [-- Attachment #1: Type: text/plain, Size: 1362 bytes --] Em Thu, 10 Jul 2008 16:29:39 +0400 Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> escreveu: | Rafael J. Wysocki wrote: | > This message has been generated automatically as a part of a report | > of recent regressions. | > | > The following bug entry is on the current list of known regressions | > from 2.6.25. Please verify if it still should be listed. | > | > | > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11035 | > Subject : System hangs on 2.6.26-rc8 | > Submitter : Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> | > Date : 2008-07-02 14:25 (5 days old) | > References : http://marc.info/?l=linux-kernel&m=121500871414995&w=4 | > | > | > | I have this problem with 2.6.25 too. | Unfortunately, I can't check 2.6.24. With config from 2.6.26-rc8 I got | error of compiling: | | LD .tmp_vmlinux1 | kernel/built-in.o: In function `timespec_add_ns': | /usr/src/kernels/linux-2.6.24/include/linux/time.h:179: undefined | reference to `__umoddi3' [...] You're trying to compile with gcc 4.3, right? You can try the attached fix or the following cherry-pick if you're compiling from a git tree: $ git cherry-pick 38332cb98772f5ea757e6486bed7ed0381cb5f98 But I can't tell whether the compiler and/or the fix will change the behaivor of the bug you're reporting. -- Luiz Fernando N. Capitulino [-- Attachment #2: time.patch --] [-- Type: text/x-patch, Size: 1176 bytes --] commit 38332cb98772f5ea757e6486bed7ed0381cb5f98 Author: Segher Boessenkool <segher-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org> Date: Tue Mar 4 14:59:54 2008 -0800 time: prevent the loop in timespec_add_ns() from being optimised away Since some architectures don't support __udivdi3(). Signed-off-by: Segher Boessenkool <segher-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org> Cc: john stultz <johnstul-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org> Cc: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org> Signed-off-by: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> Signed-off-by: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> diff --git a/include/linux/time.h b/include/linux/time.h index 2091a19..d32ef0a 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -174,6 +174,10 @@ static inline void timespec_add_ns(struct timespec *a, u64 ns) { ns += a->tv_nsec; while(unlikely(ns >= NSEC_PER_SEC)) { + /* The following asm() prevents the compiler from + * optimising this loop into a modulo operation. */ + asm("" : "+r"(ns)); + ns -= NSEC_PER_SEC; a->tv_sec++; } ^ permalink raw reply related [flat|nested] 109+ messages in thread
[parent not found: <20080710150841.139c2a71-nIupHZaCssooJnjsDhvDDvd9D2ou9A/h@public.gmane.org>]
* Re: [Bug #11035] System hangs on 2.6.26-rc8 [not found] ` <20080710150841.139c2a71-nIupHZaCssooJnjsDhvDDvd9D2ou9A/h@public.gmane.org> @ 2008-07-12 15:07 ` Roman Mindalev 0 siblings, 0 replies; 109+ messages in thread From: Roman Mindalev @ 2008-07-12 15:07 UTC (permalink / raw) To: Luiz Fernando N. Capitulino Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List Luiz Fernando N. Capitulino wrote: > Em Thu, 10 Jul 2008 16:29:39 +0400 > Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> escreveu: > > | Rafael J. Wysocki wrote: > | > This message has been generated automatically as a part of a report > | > of recent regressions. > | > > | > The following bug entry is on the current list of known regressions > | > from 2.6.25. Please verify if it still should be listed. > | > > | > > | > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11035 > | > Subject : System hangs on 2.6.26-rc8 > | > Submitter : Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> > | > Date : 2008-07-02 14:25 (5 days old) > | > References : http://marc.info/?l=linux-kernel&m=121500871414995&w=4 > | > > | > > | > > | I have this problem with 2.6.25 too. > | Unfortunately, I can't check 2.6.24. With config from 2.6.26-rc8 I got > | error of compiling: > | > | LD .tmp_vmlinux1 > | kernel/built-in.o: In function `timespec_add_ns': > | /usr/src/kernels/linux-2.6.24/include/linux/time.h:179: undefined > | reference to `__umoddi3' > > [...] > > You're trying to compile with gcc 4.3, right? Yes, GCC 4.3.1. With time.patch kernel compiled successfully. Thanks for help! ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #11035] System hangs on 2.6.26-rc8 2008-07-06 11:45 ` [Bug #11035] System hangs on 2.6.26-rc8 Rafael J. Wysocki 2008-07-10 12:29 ` Roman Mindalev @ 2008-07-12 15:48 ` Roman Mindalev [not found] ` <4878D259.7050403-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> 1 sibling, 1 reply; 109+ messages in thread From: Roman Mindalev @ 2008-07-12 15:48 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: Linux Kernel Mailing List, Kernel Testers List Rafael J. Wysocki wrote: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11035 > Subject : System hangs on 2.6.26-rc8 > Submitter : Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> > Date : 2008-07-02 14:25 (5 days old) > References : http://marc.info/?l=linux-kernel&m=121500871414995&w=4 > > > -- > To unsubscribe from this list: send the line "unsubscribe kernel-testers" in > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Announce: It is long history, if you don't want to read it, go directly to assumption ;) Short description of problem: SIGSEGV on high I/O load (reading packages database, kernel untaring) without any records in logs Prehistory: 2.6.26-rc7 works, 2.6.26-rc8 buggy, configs very simular. History: In last days I compiled some 2.6.25 kernels (took it, because it is stable) with different configs (step-by-step disabling options, not equals in -rc7 and -rc8) and got next results: 2.6.25 (preemtible, preempt rcu, 300 Hz, snd_sequencer, snd_seq_dummy, snd_rtctimer, snd_seq_rtctimer_default, debug_preempt, rcu_tortune_test) - bug 2.6.25 (preemtible, preempt rcu, 300 Hz, snd_sequencer, snd_seq_dummy, debug_preempt, rcu_tortune_test) - bug 2.6.25 (preemtible, preempt rcu, 300 Hz, snd_sequencer, debug_preempt, rcu_tortune_test) - bug 2.6.25 (preemtible, preempt rcu, 300 Hz, debug_preempt, rcu_tortune_test) - bug 2.6.25 (preemtible, preempt rcu, 250 Hz, debug_preempt, rcu_tortune_test) - bug 2.6.25 (preemtible, preempt rcu, 250 Hz, snd_rtctimer, debug_preempt, rcu_tortune_test) - bug 2.6.25 (preemtible, preempt rcu, 100 Hz, debug_preempt, rcu_tortune_test) - bug 2.6.25 (preemtible, 250 Hz, debug_preempt, rcu_tortune_test) - bug 2.6.25 (250 Hz, rcu_tortune_test) - bug 2.6.25 (250 Hz) - bug And I understand - problem not (only?) in kernel, problem in GCC too (I updated whole system in June). 2.6.24 - one kernel (I'm tested from it to latest rc), which (with time.patch) works with GCC 4.3.1 2.6.25 and above (tested with 2.6.26-rc7, 2.6.26-rc8, 2.6.26-rc9) don't works, if compiled with this compiler version. Then I look on my (working) kernels - 2.6.26-rc6 was compiled with GCC 4.2.4, and 2.6.26-rc7 too... In testing purposes I took some listed kernels and recompiled them with other GCC version. Common results in table: GCC 4.3.1, kernel 2.6.24 - works GCC 4.2.4, kernel 2.6.25 - works GCC 4.3.1, kernel 2.6.25 - bug GCC 4.2.4, kernel 2.6.26-rc7 - works GCC 4.3.1, kernel 2.6.26-rc7 - bug GCC 4.2.4, kernel 2.6.26-rc8 - works GCC 4.3.1, kernel 2.6.26-rc8 - bug Assumption: new features (or new bugs:)) in GCC 4.3 conflicts with some commit(s), included in kernel between 2.6.24 and 2.6.25 ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <4878D259.7050403-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org>]
* Re: [Bug #11035] System hangs on 2.6.26-rc8 [not found] ` <4878D259.7050403-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> @ 2008-07-15 13:40 ` Roman Mindalev [not found] ` <487CA8E5.8020208-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Roman Mindalev @ 2008-07-15 13:40 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Kernel Testers List, Ingo Molnar, Thomas Gleixner [-- Attachment #1: Type: text/plain, Size: 5181 bytes --] Roman Mindalev wrote: > Rafael J. Wysocki wrote: >> This message has been generated automatically as a part of a report >> of recent regressions. >> >> The following bug entry is on the current list of known regressions >> from 2.6.25. Please verify if it still should be listed. >> >> >> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11035 >> Subject : System hangs on 2.6.26-rc8 >> Submitter : Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> >> Date : 2008-07-02 14:25 (5 days old) >> References : http://marc.info/?l=linux-kernel&m=121500871414995&w=4 >> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe kernel-testers" in >> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > Announce: It is long history, if you don't want to read it, go directly > to assumption ;) > > Short description of problem: SIGSEGV on high I/O load (reading packages > database, kernel untaring) without any records in logs > > Prehistory: 2.6.26-rc7 works, 2.6.26-rc8 buggy, configs very simular. > > History: In last days I compiled some 2.6.25 kernels (took it, because > it is stable) with different configs (step-by-step disabling options, > not equals in -rc7 and -rc8) and got next results: > > 2.6.25 (preemtible, preempt rcu, 300 Hz, snd_sequencer, snd_seq_dummy, > snd_rtctimer, snd_seq_rtctimer_default, debug_preempt, rcu_tortune_test) > - bug > 2.6.25 (preemtible, preempt rcu, 300 Hz, snd_sequencer, snd_seq_dummy, > debug_preempt, rcu_tortune_test) - bug > 2.6.25 (preemtible, preempt rcu, 300 Hz, snd_sequencer, debug_preempt, > rcu_tortune_test) - bug > 2.6.25 (preemtible, preempt rcu, 300 Hz, debug_preempt, > rcu_tortune_test) - bug > 2.6.25 (preemtible, preempt rcu, 250 Hz, debug_preempt, > rcu_tortune_test) - bug > 2.6.25 (preemtible, preempt rcu, 250 Hz, snd_rtctimer, debug_preempt, > rcu_tortune_test) - bug > 2.6.25 (preemtible, preempt rcu, 100 Hz, debug_preempt, > rcu_tortune_test) - bug > 2.6.25 (preemtible, 250 Hz, debug_preempt, rcu_tortune_test) - bug > 2.6.25 (250 Hz, rcu_tortune_test) - bug > 2.6.25 (250 Hz) - bug > > And I understand - problem not (only?) in kernel, problem in GCC too (I > updated whole system in June). > > 2.6.24 - one kernel (I'm tested from it to latest rc), which (with > time.patch) works with GCC 4.3.1 > 2.6.25 and above (tested with 2.6.26-rc7, 2.6.26-rc8, 2.6.26-rc9) don't > works, if compiled with this compiler version. > > Then I look on my (working) kernels - 2.6.26-rc6 was compiled with GCC > 4.2.4, and 2.6.26-rc7 too... > > In testing purposes I took some listed kernels and recompiled them with > other GCC version. > > Common results in table: > GCC 4.3.1, kernel 2.6.24 - works > GCC 4.2.4, kernel 2.6.25 - works > GCC 4.3.1, kernel 2.6.25 - bug > GCC 4.2.4, kernel 2.6.26-rc7 - works > GCC 4.3.1, kernel 2.6.26-rc7 - bug > GCC 4.2.4, kernel 2.6.26-rc8 - works > GCC 4.3.1, kernel 2.6.26-rc8 - bug > > Assumption: new features (or new bugs:)) in GCC 4.3 conflicts with some > commit(s), included in kernel between 2.6.24 and 2.6.25 > -- > To unsubscribe from this list: send the line "unsubscribe kernel-testers" in > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > I done bisection. Result below: 8f46924600e30b140445f5b84abe9b80d2fff5fb is first bad commit commit 8f46924600e30b140445f5b84abe9b80d2fff5fb Author: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org> Date: Wed Jan 30 13:34:09 2008 +0100 x86: enable CONFIG_DEBUG_PAGEALLOC more widely make CONFIG_DEBUG_PAGEALLOC universally available. CONFIG_HIBERNATION and CONFIG_HUGETLBFS was disabling it, for no particular reason. If there are any unfixed bugs here we'll fix it, but do not disable vital debugging facilities like that .. Signed-off-by: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org> Signed-off-by: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> :040000 040000 ea82c42d0972aabc1f34978dc9b9c73edbd7e508 446e8dd9bb2fcb1698d038b09800dc8aa8c335ab M arch Commit body: diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 2a859a7..347e33e 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -40,7 +40,7 @@ comment "Page alloc debug is incompatible with Software Suspend on i386" config DEBUG_PAGEALLOC bool "Debug page memory allocations" - depends on DEBUG_KERNEL && !HIBERNATION && !HUGETLBFS + depends on DEBUG_KERNEL help Unmap pages from the kernel linear mapping after free_pages(). This results in a large slowdown, but helps to find certain types I applied it (reversed) to 2.6.25 source and compiled new kernel. Hibernation enabled, hugetlbfs too. And difference between configs: diff config-2.6.25-old config-2.6.25-new 4c4 < # Sat Jul 12 17:24:17 2008 --- > # Tue Jul 15 16:24:10 2008 1927d1926 < CONFIG_DEBUG_PAGEALLOC=y I have no problems with this (new) config. Seems conflict between new features in GCC 4.3.1 and pagealloc debug? [-- Attachment #2: config-2.6.25-new.tar.gz --] [-- Type: application/x-gzip, Size: 12338 bytes --] [-- Attachment #3: config-2.6.25-old.tar.gz --] [-- Type: application/x-gzip, Size: 12346 bytes --] ^ permalink raw reply related [flat|nested] 109+ messages in thread
[parent not found: <487CA8E5.8020208-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org>]
* Re: [Bug #11035] System hangs on 2.6.26-rc8 [not found] ` <487CA8E5.8020208-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> @ 2008-07-18 7:11 ` Ingo Molnar 2008-07-18 7:17 ` Nigel Cunningham [not found] ` <20080718071121.GB6875-X9Un+BFzKDI@public.gmane.org> 0 siblings, 2 replies; 109+ messages in thread From: Ingo Molnar @ 2008-07-18 7:11 UTC (permalink / raw) To: Roman Mindalev Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List, Thomas Gleixner, Vegard Nossum * Roman Mindalev <lists-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org> wrote: > I done bisection. > Result below: > > 8f46924600e30b140445f5b84abe9b80d2fff5fb is first bad commit > commit 8f46924600e30b140445f5b84abe9b80d2fff5fb > Author: Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org> > Date: Wed Jan 30 13:34:09 2008 +0100 > > x86: enable CONFIG_DEBUG_PAGEALLOC more widely > > make CONFIG_DEBUG_PAGEALLOC universally available. > > CONFIG_HIBERNATION and CONFIG_HUGETLBFS was disabling it, for no > particular reason. as far as i can see you see a lockup under certain circumstances, right? this debug option catches use-after-free and other types of invalid memory accesses. When it catches a bug the kernel most likely crashes and produces a backlog. Because you are in graphical mode that is not visible. This would possibly be debuggable if you set up netconsole logging to another system on a local LAN - see Documentation/networking/netconsole.txt. Vegard - would it be possible to make DEBUG_PAGEALLOC faults single-shot and non-fatal, just like kmemcheck does it? That way people would see a nice kernel message instead of an immediate crash. That means we'd have to find a reliable filter for DEBUG_PAGEALLOC-provoked pagefaults though ... Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #11035] System hangs on 2.6.26-rc8 2008-07-18 7:11 ` Ingo Molnar @ 2008-07-18 7:17 ` Nigel Cunningham [not found] ` <20080718071121.GB6875-X9Un+BFzKDI@public.gmane.org> 1 sibling, 0 replies; 109+ messages in thread From: Nigel Cunningham @ 2008-07-18 7:17 UTC (permalink / raw) To: Ingo Molnar Cc: Roman Mindalev, Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List, Thomas Gleixner, Vegard Nossum Hi. On Fri, 2008-07-18 at 09:11 +0200, Ingo Molnar wrote: > * Roman Mindalev <lists@r000n.net> wrote: > > > I done bisection. > > Result below: > > > > 8f46924600e30b140445f5b84abe9b80d2fff5fb is first bad commit > > commit 8f46924600e30b140445f5b84abe9b80d2fff5fb > > Author: Ingo Molnar <mingo@elte.hu> > > Date: Wed Jan 30 13:34:09 2008 +0100 > > > > x86: enable CONFIG_DEBUG_PAGEALLOC more widely > > > > make CONFIG_DEBUG_PAGEALLOC universally available. > > > > CONFIG_HIBERNATION and CONFIG_HUGETLBFS was disabling it, for no > > particular reason. > > as far as i can see you see a lockup under certain circumstances, right? > > this debug option catches use-after-free and other types of invalid > memory accesses. When it catches a bug the kernel most likely crashes > and produces a backlog. Because you are in graphical mode that is not > visible. > > This would possibly be debuggable if you set up netconsole logging to > another system on a local LAN - see > Documentation/networking/netconsole.txt. > > Vegard - would it be possible to make DEBUG_PAGEALLOC faults single-shot > and non-fatal, just like kmemcheck does it? That way people would see a > nice kernel message instead of an immediate crash. That means we'd have > to find a reliable filter for DEBUG_PAGEALLOC-provoked pagefaults though > ... Not that it matters now, but that original commit message was wrong - CONFIG_HIBERNATION used to be incompatible with CONFIG_DEBUG_PAGEALLOC because [u]swsusp didn't (until very recently) handle the fact that DEBUG_SLAB unmaps empty pages on x86. Regards, Nigel ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080718071121.GB6875-X9Un+BFzKDI@public.gmane.org>]
* Re: [Bug #11035] System hangs on 2.6.26-rc8 [not found] ` <20080718071121.GB6875-X9Un+BFzKDI@public.gmane.org> @ 2008-07-18 7:28 ` Vegard Nossum [not found] ` <19f34abd0807180028y2be61c06ueab5fcc305956f80-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Vegard Nossum @ 2008-07-18 7:28 UTC (permalink / raw) To: Ingo Molnar Cc: Roman Mindalev, Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List, Thomas Gleixner On Fri, Jul 18, 2008 at 9:11 AM, Ingo Molnar <mingo-X9Un+BFzKDI@public.gmane.org> wrote: > Vegard - would it be possible to make DEBUG_PAGEALLOC faults single-shot > and non-fatal, just like kmemcheck does it? That way people would see a > nice kernel message instead of an immediate crash. That means we'd have > to find a reliable filter for DEBUG_PAGEALLOC-provoked pagefaults though > ... Hm.. Yes, we could do it in a similar fashion using single-stepping. It should take little effort; we already have most of the code to do it; mmiotrace does the same thing too, after all. These are some considerations: 1. If the page is kernel space but currently unmapped, does it point to a valid page of RAM even though it is non-present? 2. Should we allow reading/writing of the underlying physical page (if it exists), or should we prevent writes (i.e. allow the instruction to proceed, but don't really write anything) and reads (i.e. allow the instruction to read 0 or another magic number). For the filter you mentioned, we could perhaps use one more bit in the PTE. This is what we do for kmemcheck, and IIRC DEBUG_PAGEALLOC is incompatible with kmemcheck anyway (I don't remember why exactly), so we could reuse the same bit. BTW, I didn't consider that argument (of continuing as far as possible) before, but it's a good one; if we don't crash completely, the user can still copy the log we have a better report of it. I guess kerneloops.org is currently missing out a great deal of reports which all shut down the machine immediately without a chance to go into the log. Vegard -- "The animistic metaphor of the bug that maliciously sneaked in while the programmer was not looking is intellectually dishonest as it disguises that the error is the programmer's own creation." -- E. W. Dijkstra, EWD1036 ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <19f34abd0807180028y2be61c06ueab5fcc305956f80-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [Bug #11035] System hangs on 2.6.26-rc8 [not found] ` <19f34abd0807180028y2be61c06ueab5fcc305956f80-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2008-07-18 22:25 ` Ingo Molnar 0 siblings, 0 replies; 109+ messages in thread From: Ingo Molnar @ 2008-07-18 22:25 UTC (permalink / raw) To: Vegard Nossum Cc: Roman Mindalev, Rafael J. Wysocki, Linux Kernel Mailing List, Kernel Testers List, Thomas Gleixner * Vegard Nossum <vegard.nossum-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > BTW, I didn't consider that argument (of continuing as far as > possible) before, but it's a good one; if we don't crash completely, > the user can still copy the log we have a better report of it. I guess > kerneloops.org is currently missing out a great deal of reports which > all shut down the machine immediately without a chance to go into the > log. yes. There are two techniques to improve the 'yield' of kerneloops.org: 1) make a better job of getting the logs off the box 2) make a better job of not crashing the box when we can do better. For example lockdep tries very hard to never crash the box. It is a feature that warns about a chance of a lockup, not about a lockup itself - so crashing the box at the point of the bug detection is counter-productive. The same applies to DEBUG_PAGEALLOC as well: technically nobody (but the buggy code itself) is hurt by accessing already freed data. So we could try and let it run. (Btw., this might be a way to share a mechanism between kmemcheck and DEBUG_PAGEALLOC, and make kmemcheck more useful to the general kernel as a whole.) Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11006] 2.6.26-rc6: pcmcia stopped working 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (25 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11035] System hangs on 2.6.26-rc8 Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10865] Oops trying to mount an ntfs partition on thinkpad Rafael J. Wysocki ` (14 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Bartlomiej Zolnierkiewicz, Pavel Machek, Tejun Heo This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11006 Subject : 2.6.26-rc6: pcmcia stopped working Submitter : Pavel Machek <pavel-AlSwsSmVLrQ@public.gmane.org> Date : 2008-06-22 22:40 (15 days old) References : http://marc.info/?l=linux-kernel&m=121420740806363&w=4 http://marc.info/?t=121439185700001&r=1&w=4 Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Bartlomiej Zolnierkiewicz <bzolnier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Patch : http://marc.info/?l=linux-kernel&m=121526230022719&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10865] Oops trying to mount an ntfs partition on thinkpad 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (26 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11006] 2.6.26-rc6: pcmcia stopped working Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 16:07 ` Alex Romosan 2008-07-06 11:45 ` [Bug #11041] All 2.6.26-rcX hang immediately after loading ohci_hcd Rafael J. Wysocki ` (13 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Alex Romosan This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10865 Subject : Oops trying to mount an ntfs partition on thinkpad Submitter : Alex Romosan <romosan-z2gvhuI27Wv/eO6KEJJvLQ@public.gmane.org> Date : 2008-06-05 14:47 (32 days old) References : http://marc.info/?l=linux-kernel&m=121267834421414&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10865] Oops trying to mount an ntfs partition on thinkpad 2008-07-06 11:45 ` [Bug #10865] Oops trying to mount an ntfs partition on thinkpad Rafael J. Wysocki @ 2008-07-06 16:07 ` Alex Romosan 0 siblings, 0 replies; 109+ messages in thread From: Alex Romosan @ 2008-07-06 16:07 UTC (permalink / raw) To: Rafael J. Wysocki; +Cc: Linux Kernel Mailing List, Kernel Testers List "Rafael J. Wysocki" <rjw@sisk.pl> writes: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10865 > Subject : Oops trying to mount an ntfs partition on thinkpad > Submitter : Alex Romosan <romosan@sycorax.lbl.gov> > Date : 2008-06-05 14:47 (32 days old) > References : http://marc.info/?l=linux-kernel&m=121267834421414&w=4 > save behaviour with rc9. --alex-- -- | I believe the moment is at hand when, by a paranoiac and active | | advance of the mind, it will be possible (simultaneously with | | automatism and other passive states) to systematize confusion | | and thus to help to discredit completely the world of reality. | ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11041] All 2.6.26-rcX hang immediately after loading ohci_hcd 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (27 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10865] Oops trying to mount an ntfs partition on thinkpad Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #11023] 2.6.26-rc8-git2 - kernel BUG at mm/page_alloc.c:585 Rafael J. Wysocki ` (12 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Andrey Borzenkov, Linus Torvalds This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11041 Subject : All 2.6.26-rcX hang immediately after loading ohci_hcd Submitter : Andrey Borzenkov <arvidjaar-JGs/UdohzUI@public.gmane.org> Date : 2008-07-05 7:08 (2 days old) References : http://marc.info/?l=linux-kernel&m=121524504505805&w=4 Handled-By : Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11023] 2.6.26-rc8-git2 - kernel BUG at mm/page_alloc.c:585 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (28 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11041] All 2.6.26-rcX hang immediately after loading ohci_hcd Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10906] repeatable slab corruption with LTP msgctl08 Rafael J. Wysocki ` (11 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Andrew Morton, Kamalesh Babulal This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11023 Subject : 2.6.26-rc8-git2 - kernel BUG at mm/page_alloc.c:585 Submitter : Kamalesh Babulal <kamalesh-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> Date : 2008-07-02 11:55 (5 days old) References : http://lkml.org/lkml/2008/7/2/32 Handled-By : Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10906] repeatable slab corruption with LTP msgctl08 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (29 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11023] 2.6.26-rc8-git2 - kernel BUG at mm/page_alloc.c:585 Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10984] MMC print trace information when resume from suspend Rafael J. Wysocki ` (10 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Andi Kleen, Andrew Morton, Christoph Lameter, Manfred Spraul, Pekka J Enberg This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10906 Subject : repeatable slab corruption with LTP msgctl08 Submitter : Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> Date : 2008-06-12 5:13 (25 days old) References : http://marc.info/?l=linux-kernel&m=121324775927704&w=4 Handled-By : Pekka J Enberg <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org> Christoph Lameter <clameter-sJ/iWh9BUns@public.gmane.org> Manfred Spraul <manfred-nhLOkwUX5cPe2c5cEj3t2g@public.gmane.org> Andi Kleen <andi-Vw/NltI1exuRpAAqCnN02g@public.gmane.org> ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10984] MMC print trace information when resume from suspend 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (30 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10906] repeatable slab corruption with LTP msgctl08 Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10989] kernel oopses when wiggling the mouse to make it known to hidd Rafael J. Wysocki ` (9 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Jie Luo This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10984 Subject : MMC print trace information when resume from suspend Submitter : Jie Luo <clotho67-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-06-26 01:15 (11 days old) ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10989] kernel oopses when wiggling the mouse to make it known to hidd 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (31 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10984] MMC print trace information when resume from suspend Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #11042] build issue #477 for v2.6.26-rc8-290-gb8a0b6c : input_event" [drivers/media/dvb/ttpci/dvb-ttpci.ko] undefined! Rafael J. Wysocki ` (8 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Daniel Vetter This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10989 Subject : kernel oopses when wiggling the mouse to make it known to hidd Submitter : Daniel Vetter <daniel-/w4YWyX8dFk@public.gmane.org> Date : 2008-06-26 10:32 (11 days old) ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #11042] build issue #477 for v2.6.26-rc8-290-gb8a0b6c : input_event" [drivers/media/dvb/ttpci/dvb-ttpci.ko] undefined! 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (32 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10989] kernel oopses when wiggling the mouse to make it known to hidd Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10862] forcedeth: lockdep warning on ethtool -s Rafael J. Wysocki ` (7 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Oliver Endriss, Toralf Förster This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11042 Subject : build issue #477 for v2.6.26-rc8-290-gb8a0b6c : input_event" [drivers/media/dvb/ttpci/dvb-ttpci.ko] undefined! Submitter : Toralf Förster <toralf.foerster-Mmb7MZpHnFY@public.gmane.org> Date : 2008-07-05 15:25 (2 days old) References : http://marc.info/?l=linux-kernel&m=121527158632563&w=4 Handled-By : Oliver Endriss <o.endriss-Mmb7MZpHnFY@public.gmane.org> Patch : http://marc.info/?l=linux-kernel&m=121529790229531&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10862] forcedeth: lockdep warning on ethtool -s 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (33 preceding siblings ...) 2008-07-06 11:45 ` [Bug #11042] build issue #477 for v2.6.26-rc8-290-gb8a0b6c : input_event" [drivers/media/dvb/ttpci/dvb-ttpci.ko] undefined! Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #9791] Clock is running too fast^Wslow using acpi_pm clocksource Rafael J. Wysocki ` (6 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List; +Cc: Kernel Testers List, Tobias Diedrich This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10862 Subject : forcedeth: lockdep warning on ethtool -s Submitter : Tobias Diedrich <ranma+kernel-YxUgxmcw2FPQD6PfKP4TzA@public.gmane.org> Date : 2008-06-01 8:37 (36 days old) References : http://marc.info/?l=linux-kernel&m=121230964032247&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #9791] Clock is running too fast^Wslow using acpi_pm clocksource 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (34 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10862] forcedeth: lockdep warning on ethtool -s Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 11:45 ` [Bug #10861] 2.6.26-rc4-git2 - long pause during boot Rafael J. Wysocki ` (5 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Ingo Molnar, Maciej W. Rozycki, Thomas Gleixner, "tosn00j02-O/bDAPVd7B0N+BqQ9rBEUg This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=9791 Subject : Clock is running too fast^Wslow using acpi_pm clocksource Submitter : tosn00j02-O/bDAPVd7B0N+BqQ9rBEUg@public.gmane.org Date : 2008-05-03 05:09 (65 days old) Handled-By : Maciej W. Rozycki <macro-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org> Patch : http://bugzilla.kernel.org/attachment.cgi?id=16180 ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10861] 2.6.26-rc4-git2 - long pause during boot 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (35 preceding siblings ...) 2008-07-06 11:45 ` [Bug #9791] Clock is running too fast^Wslow using acpi_pm clocksource Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 14:33 ` James Bottomley 2008-07-06 11:45 ` [Bug #10957] pata_pcmcia with Sandisk Extreme III 8GB Rafael J. Wysocki ` (4 subsequent siblings) 41 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Chris Clayton, Hannes Reinecke, James Bottomley, Kay Sievers This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10861 Subject : 2.6.26-rc4-git2 - long pause during boot Submitter : Chris Clayton <chris2553-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> Date : 2008-06-01 4:15 (36 days old) References : http://marc.info/?l=linux-kernel&m=121229382917834&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [Bug #10861] 2.6.26-rc4-git2 - long pause during boot 2008-07-06 11:45 ` [Bug #10861] 2.6.26-rc4-git2 - long pause during boot Rafael J. Wysocki @ 2008-07-06 14:33 ` James Bottomley [not found] ` <1215354787.4197.1.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: James Bottomley @ 2008-07-06 14:33 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Kernel Testers List, Chris Clayton, Hannes Reinecke, Kay Sievers On Sun, 2008-07-06 at 13:45 +0200, Rafael J. Wysocki wrote: > This message has been generated automatically as a part of a report > of recent regressions. > > The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed. Erm, this isn't a kernel regression, it's a udev rule problem. The rule has been identified and fixed; the reporter confirms it fixes the problem and the upstream maintainer of udev is putting out a release with it in ... what more exactly needs to be done? James ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <1215354787.4197.1.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>]
* Re: [Bug #10861] 2.6.26-rc4-git2 - long pause during boot [not found] ` <1215354787.4197.1.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> @ 2008-07-06 17:16 ` Rafael J. Wysocki 0 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 17:16 UTC (permalink / raw) To: James Bottomley Cc: Linux Kernel Mailing List, Kernel Testers List, Chris Clayton, Hannes Reinecke, Kay Sievers On Sunday, 6 of July 2008, James Bottomley wrote: > On Sun, 2008-07-06 at 13:45 +0200, Rafael J. Wysocki wrote: > > This message has been generated automatically as a part of a report > > of recent regressions. > > > > The following bug entry is on the current list of known regressions > > from 2.6.25. Please verify if it still should be listed. > > Erm, this isn't a kernel regression, it's a udev rule problem. > > The rule has been identified and fixed; the reporter confirms it fixes > the problem and the upstream maintainer of udev is putting out a release > with it in ... what more exactly needs to be done? Closed as "invalid". Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
* [Bug #10957] pata_pcmcia with Sandisk Extreme III 8GB 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (36 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10861] 2.6.26-rc4-git2 - long pause during boot Rafael J. Wysocki @ 2008-07-06 11:45 ` Rafael J. Wysocki 2008-07-06 14:14 ` 2.6.26-rc9: Reported regressions from 2.6.25 Ingo Molnar ` (3 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 11:45 UTC (permalink / raw) To: Linux Kernel Mailing List Cc: Kernel Testers List, Dominik Brodowski, Komuro, Tejun Heo This message has been generated automatically as a part of a report of recent regressions. The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed. Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10957 Subject : pata_pcmcia with Sandisk Extreme III 8GB Submitter : Komuro <komurojun-mbn-dTzOdQ2U+/YAvxtiuMwx3w@public.gmane.org> Date : 2008-06-07 13:37 (30 days old) References : http://marc.info/?l=linux-kernel&m=121284627119861&w=4 Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Dominik Brodowski <linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org> Komuro <komurojun-mbn-dTzOdQ2U+/YAvxtiuMwx3w@public.gmane.org> Patch : http://marc.info/?l=linux-kernel&m=121530861605673&w=4 ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (37 preceding siblings ...) 2008-07-06 11:45 ` [Bug #10957] pata_pcmcia with Sandisk Extreme III 8GB Rafael J. Wysocki @ 2008-07-06 14:14 ` Ingo Molnar 2008-07-06 15:46 ` Linus Torvalds ` (2 subsequent siblings) 41 siblings, 0 replies; 109+ messages in thread From: Ingo Molnar @ 2008-07-06 14:14 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Linus Torvalds, Natalie Protasevich, Kernel Testers List * Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote: > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10726 > Subject : x86-64 NODES_SHIFT compile failure. > Submitter : Dave Jones <davej-rdkfGonbjUTCLXcRTR1eJlpr/1R2p/CL@public.gmane.org> > Date : 2008-05-16 12:54 (52 days old) > References : http://lkml.org/lkml/2008/5/16/312 > Handled-By : Mike Travis <travis-sJ/iWh9BUns@public.gmane.org> > Patch : http://lkml.org/lkml/2008/5/16/343 fixed by: commit efac41894df57d32b483ac622d03541b5b2692c0 Author: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> Date: Tue Jul 1 08:56:32 2008 +0200 x86: fix NODES_SHIFT Kconfig range Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (38 preceding siblings ...) 2008-07-06 14:14 ` 2.6.26-rc9: Reported regressions from 2.6.25 Ingo Molnar @ 2008-07-06 15:46 ` Linus Torvalds [not found] ` <alpine.LFD.1.10.0807060816070.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> 2008-07-06 21:54 ` Linus Torvalds 2008-07-07 0:51 ` Benjamin Herrenschmidt 41 siblings, 1 reply; 109+ messages in thread From: Linus Torvalds @ 2008-07-06 15:46 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley On Sun, 6 Jul 2008, Rafael J. Wysocki wrote: > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11025 > Subject : [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) > Submitter : Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> > Date : 2008-07-01 1:57 (6 days old) > References : http://marc.info/?l=linux-kernel&m=121487749429883&w=4 > Handled-By : Mel Gorman <mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> > Andy Whitcroft <apw-26w3C0LaAnFg9hUCZPvPmw@public.gmane.org> Fixed by commit 494de90098784b8e2797598cefdd34188884ec2e: "Do not overwrite nr_zones on !NUMA when initialising zlcache_ptr" by Mel. > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10919 > Subject : [regression] display dimming is slow and laggy - Acer Travelmate 661lci > Submitter : Maximilian Engelhardt <maxi-OwNUvPV92VfddJNmlsFzeA@public.gmane.org> > Date : 2008-06-14 22:31 (23 days old) > References : http://marc.info/?l=linux-kernel&m=121348428828320&w=4 I wonder if this one could be related. The 'nr_zones' overwriting bug would result in kswapd not reclaiming any memory asynchronously, so the kernel would basically be constantly under a low-memory situation, and processes would be forced to do synchronous reclaim. That, in turn, could easily explain laggy operation, especially if it is something bigger that needs to allocate new memory (not that I know if X dimming needs to, but I could imagine that it does some double buffering or whatever). > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10872 > Subject : x86_64 boot hang when CONFIG_NUMA=n > Submitter : Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> > Date : 2008-06-05 21:50 (32 days old) > References : http://marc.info/?l=linux-kernel&m=121270308607116&w=4 > http://lkml.org/lkml/2008/6/11/355 > http://lkml.org/lkml/2008/6/15/117 > Handled-By : Yinghai Lu <yhlu.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> This really doesn't sound like low memory, but the CONFIG_NUMA thing is intriguing, since again, the 'nr_zones' thing depended on that. It would break 'balance_pgdat()' entirely, and maybe some balancing operation can get confused even before you actually run out of memory Unlikely, but worth re-testing. > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11008 > Subject : after laptop re-dock: usb-storage device no longer detected > Submitter : Lukas Hejtmanek <xhejtman-8qz54MUs51PtwjQa/ONI9g@public.gmane.org> > Date : 2008-06-26 17:37 (11 days old) > References : http://lkml.org/lkml/2008/6/26/391 > Handled-By : Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> > Patch : http://lkml.org/lkml/2008/6/30/305 This patch got merged: commit 1236edf1c70107a0d31b3fba0b2a8783615d0d24 ("USB: don't lose disconnections during suspend"). > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11006 > Subject : 2.6.26-rc6: pcmcia stopped working > Submitter : Pavel Machek <pavel-AlSwsSmVLrQ@public.gmane.org> > Date : 2008-06-22 22:40 (15 days old) > References : http://marc.info/?l=linux-kernel&m=121420740806363&w=4 > http://marc.info/?t=121439185700001&r=1&w=4 > Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Bartlomiej Zolnierkiewicz <bzolnier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Patch : http://marc.info/?l=linux-kernel&m=121526230022719&w=4 Ditto: commit 7cd95f56cb61f5348d062527c9d3653196f6e629 ("ide: fix hwif->gendev refcounting") > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10860 > Subject : total system freeze at boot with 2.6.26-rc > Submitter : Christian Casteyde <casteyde.christian-GANU6spQydw@public.gmane.org> > Date : 2008-06-05 12:38 (32 days old) > Handled-By : Tejun Heo <htejun-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Patch : http://bugzilla.kernel.org/attachment.cgi?id=16556 Fixed in commit 70a3143af87c6ca188107cbd49ab5eec2c86c456 ("sata_uli: hardreset is broken") > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10815 > Subject : 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 > Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Date : 2008-05-27 09:23 (41 days old) > References : http://lkml.org/lkml/2008/5/27/9 > http://lkml.org/lkml/2008/6/14/87 > Handled-By : Oleg Nesterov <oleg-6lXkIZvqkOAvJsYlp49lxw@public.gmane.org> > Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> > Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > Patch : http://lkml.org/lkml/2008/5/28/16 This one is the same thing that is reported as unresolved, and no, I don't think that existing patch was ever really tested to fix anything. Paul? I suspect SRCU will need to be simply marked BROKEN for now, because nobody knows what the problem Alexey sees is. Apparently it's been seen by a few other people too. > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10726 > Subject : x86-64 NODES_SHIFT compile failure. > Submitter : Dave Jones <davej-rdkfGonbjUTCLXcRTR1eJlpr/1R2p/CL@public.gmane.org> > Date : 2008-05-16 12:54 (52 days old) > References : http://lkml.org/lkml/2008/5/16/312 > Handled-By : Mike Travis <travis-sJ/iWh9BUns@public.gmane.org> > Patch : http://lkml.org/lkml/2008/5/16/343 Fixed in commit efac41894df57d32b483ac622d03541b5b2692c0 ("x86: fix NODES_SHIFT Kconfig range"). > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10725 > Subject : USB Mass storage mount fails: Write protect on > Submitter : Maciej Rutecki <maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Date : 2008-05-16 14:55 (52 days old) > References : http://marc.info/?l=linux-kernel&m=121095168003572&w=4 > Handled-By : Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> > Patch : http://marc.info/?l=linux-scsi&m=121433068314568&w=2 Hmm. James? Linus ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <alpine.LFD.1.10.0807060816070.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <alpine.LFD.1.10.0807060816070.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> @ 2008-07-06 15:58 ` Adrian Bunk 2008-07-06 17:05 ` Rafael J. Wysocki 2008-07-06 16:11 ` James Bottomley ` (3 subsequent siblings) 4 siblings, 1 reply; 109+ messages in thread From: Adrian Bunk @ 2008-07-06 15:58 UTC (permalink / raw) To: Linus Torvalds Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley On Sun, Jul 06, 2008 at 08:46:09AM -0700, Linus Torvalds wrote: > On Sun, 6 Jul 2008, Rafael J. Wysocki wrote: >... > Fixed by commit 494de90098784b8e2797598cefdd34188884ec2e: "Do not > overwrite nr_zones on !NUMA when initialising zlcache_ptr" by Mel. >... > This patch got merged: commit 1236edf1c70107a0d31b3fba0b2a8783615d0d24 > ("USB: don't lose disconnections during suspend"). >... > Ditto: commit 7cd95f56cb61f5348d062527c9d3653196f6e629 ("ide: fix > hwif->gendev refcounting") >... > Fixed in commit 70a3143af87c6ca188107cbd49ab5eec2c86c456 ("sata_uli: > hardreset is broken") >... > Fixed in commit efac41894df57d32b483ac622d03541b5b2692c0 ("x86: fix > NODES_SHIFT Kconfig range"). >... Thanks, all closed. (I do try to close fixed regression bugs immediately after a fix enters your tree, but espicially for commits without a reference to a Bugzilla entry I sometimes miss it.) > Linus cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 2008-07-06 15:58 ` Adrian Bunk @ 2008-07-06 17:05 ` Rafael J. Wysocki [not found] ` <200807061905.50261.rjw-KKrjLPT3xs0@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 17:05 UTC (permalink / raw) To: Adrian Bunk Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley On Sunday, 6 of July 2008, Adrian Bunk wrote: > On Sun, Jul 06, 2008 at 08:46:09AM -0700, Linus Torvalds wrote: > > On Sun, 6 Jul 2008, Rafael J. Wysocki wrote: > >... > > Fixed by commit 494de90098784b8e2797598cefdd34188884ec2e: "Do not > > overwrite nr_zones on !NUMA when initialising zlcache_ptr" by Mel. > >... > > This patch got merged: commit 1236edf1c70107a0d31b3fba0b2a8783615d0d24 > > ("USB: don't lose disconnections during suspend"). > >... > > Ditto: commit 7cd95f56cb61f5348d062527c9d3653196f6e629 ("ide: fix > > hwif->gendev refcounting") > >... > > Fixed in commit 70a3143af87c6ca188107cbd49ab5eec2c86c456 ("sata_uli: > > hardreset is broken") > >... > > Fixed in commit efac41894df57d32b483ac622d03541b5b2692c0 ("x86: fix > > NODES_SHIFT Kconfig range"). > >... > > Thanks, all closed. > > (I do try to close fixed regression bugs immediately after a fix enters > your tree, but espicially for commits without a reference to a Bugzilla > entry I sometimes miss it.) Also, in the next couple of days I'll be closing the bugs the reporters of which have been totally unresponsive. I'll post an updated report after that. Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <200807061905.50261.rjw-KKrjLPT3xs0@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <200807061905.50261.rjw-KKrjLPT3xs0@public.gmane.org> @ 2008-07-06 17:40 ` Adrian Bunk [not found] ` <20080706174006.GD21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Adrian Bunk @ 2008-07-06 17:40 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley On Sun, Jul 06, 2008 at 07:05:49PM +0200, Rafael J. Wysocki wrote: > > Also, in the next couple of days I'll be closing the bugs the reporters of > which have been totally unresponsive. >... If no action by us gets combined with automated weekly emails then no responses to the latter is not an unexpected event. Such a submitter might be perfectly responsive to actual work on a bug while really pissed off by getting the bug closed. Look e.g. at #10865 that had a 1 month gap in submitter responses, but the actual problem is that noone of us ever bothered to look at this Oops... I just did a run through all open 2.6.26-rc regressions, and I did not find a single one where we seem to be waiting for some time for an answer of the submitter. [1] > Thanks, > Rafael cu Adrian [1] unless there was communication not linked from Bugzilla -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080706174006.GD21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <20080706174006.GD21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> @ 2008-07-06 18:02 ` Rafael J. Wysocki [not found] ` <200807062002.46863.rjw-KKrjLPT3xs0@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 18:02 UTC (permalink / raw) To: Adrian Bunk Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley On Sunday, 6 of July 2008, Adrian Bunk wrote: > On Sun, Jul 06, 2008 at 07:05:49PM +0200, Rafael J. Wysocki wrote: > > > > Also, in the next couple of days I'll be closing the bugs the reporters of > > which have been totally unresponsive. > >... > > If no action by us gets combined with automated weekly emails then > no responses to the latter is not an unexpected event. > > Such a submitter might be perfectly responsive to actual work on a bug > while really pissed off by getting the bug closed. > > Look e.g. at #10865 that had a 1 month gap in submitter responses, > but the actual problem is that noone of us ever bothered to look at > this Oops... > > I just did a run through all open 2.6.26-rc regressions, and I did not > find a single one where we seem to be waiting for some time for an > answer of the submitter. [1] The following are my candidates: 10629 10786 10815 10906 (the thread has apparently died) 11009 Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <200807062002.46863.rjw-KKrjLPT3xs0@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <200807062002.46863.rjw-KKrjLPT3xs0@public.gmane.org> @ 2008-07-06 18:26 ` Adrian Bunk [not found] ` <20080706182648.GE21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Adrian Bunk @ 2008-07-06 18:26 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley On Sun, Jul 06, 2008 at 08:02:45PM +0200, Rafael J. Wysocki wrote: > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > On Sun, Jul 06, 2008 at 07:05:49PM +0200, Rafael J. Wysocki wrote: > > > > > > Also, in the next couple of days I'll be closing the bugs the reporters of > > > which have been totally unresponsive. > > >... > > > > If no action by us gets combined with automated weekly emails then > > no responses to the latter is not an unexpected event. > > > > Such a submitter might be perfectly responsive to actual work on a bug > > while really pissed off by getting the bug closed. > > > > Look e.g. at #10865 that had a 1 month gap in submitter responses, > > but the actual problem is that noone of us ever bothered to look at > > this Oops... > > > > I just did a run through all open 2.6.26-rc regressions, and I did not > > find a single one where we seem to be waiting for some time for an > > answer of the submitter. [1] > > The following are my candidates: > > 10629 Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10629 Subject : 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-05-05 09:59 (63 days old) References : http://lkml.org/lkml/2008/5/5/28 Handled-By : Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> See below at #10815. > 10786 Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786 Subject : parisc: 64bit SMP does not boot on J5600 Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-05-22 16:14 (46 days old) References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4 Submitter sent bug report, it seems no kernel developer ever bothered to answer. The unresponsive side is not the submitter. > 10815 Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10815 Subject : 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Date : 2008-05-27 09:23 (41 days old) References : http://lkml.org/lkml/2008/5/27/9 http://lkml.org/lkml/2008/6/14/87 Handled-By : Oleg Nesterov <oleg-6lXkIZvqkOAvJsYlp49lxw@public.gmane.org> Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> Patch : http://lkml.org/lkml/2008/5/28/16 Linus just restarted discussing this one and #10629. My impression of both bugs is that not that Alexey was unresponsive but that noone else was able to reproduce it. > 10906 (the thread has apparently died) Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10906 Subject : repeatable slab corruption with LTP msgctl08 Submitter : Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> Date : 2008-06-12 5:13 (25 days old) References : http://marc.info/?l=linux-kernel&m=121324775927704&w=4 Handled-By : Pekka J Enberg <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org> Christoph Lameter <clameter-sJ/iWh9BUns@public.gmane.org> Manfred Spraul <manfred-nhLOkwUX5cPe2c5cEj3t2g@public.gmane.org> Andi Kleen <andi-Vw/NltI1exuRpAAqCnN02g@public.gmane.org> Andrew Morton said [1]: erk. It'll make me a week to bisect this. I suppose I can plod away at it in the background, but I won't be able to do that until the end of this month. And "repeatable slab corruption" is not exactly a good regression to ignore... > 11009 Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11009 Subject : No console on Riva TNT since 2.6.26-0.rc4 Submitter : Quel Qun <kelk1-Wuw85uim5zDR7s880joybQ@public.gmane.org> Date : 2008-06-26 20:04 (11 days old) References : http://marc.info/?l=linux-kernel&m=121451344229718&w=4 Submitter sent bug report, it seems no kernel developer ever bothered to answer. The unresponsive side is not the submitter. > Thanks, > Rafael cu Adrian [1] http://lkml.org/lkml/2008/6/13/45 -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080706182648.GE21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <20080706182648.GE21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> @ 2008-07-06 21:04 ` Rafael J. Wysocki [not found] ` <200807062304.07443.rjw-KKrjLPT3xs0@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 21:04 UTC (permalink / raw) To: Adrian Bunk Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Sunday, 6 of July 2008, Adrian Bunk wrote: > On Sun, Jul 06, 2008 at 08:02:45PM +0200, Rafael J. Wysocki wrote: > > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > > On Sun, Jul 06, 2008 at 07:05:49PM +0200, Rafael J. Wysocki wrote: > > > > > > > > Also, in the next couple of days I'll be closing the bugs the reporters of > > > > which have been totally unresponsive. > > > >... > > > > > > If no action by us gets combined with automated weekly emails then > > > no responses to the latter is not an unexpected event. > > > > > > Such a submitter might be perfectly responsive to actual work on a bug > > > while really pissed off by getting the bug closed. > > > > > > Look e.g. at #10865 that had a 1 month gap in submitter responses, > > > but the actual problem is that noone of us ever bothered to look at > > > this Oops... > > > > > > I just did a run through all open 2.6.26-rc regressions, and I did not > > > find a single one where we seem to be waiting for some time for an > > > answer of the submitter. [1] > > > > The following are my candidates: > > > > 10629 > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10629 > Subject : 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 > Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Date : 2008-05-05 09:59 (63 days old) > References : http://lkml.org/lkml/2008/5/5/28 > Handled-By : Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > > > See below at #10815. > > > > 10786 > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786 > Subject : parisc: 64bit SMP does not boot on J5600 > Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > Date : 2008-05-22 16:14 (46 days old) > References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4 > > > Submitter sent bug report, it seems no kernel developer ever bothered > to answer. > > The unresponsive side is not the submitter. The report is 46 days old and the reporter has been sent a request to confirm the presence of the problem every week. Since he hasn't responded to any of those requests, I assume we're not going to hear from him. Thus, it's not useful to track this any more. Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <200807062304.07443.rjw-KKrjLPT3xs0@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <200807062304.07443.rjw-KKrjLPT3xs0@public.gmane.org> @ 2008-07-06 21:32 ` Adrian Bunk [not found] ` <20080706213214.GH21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Adrian Bunk @ 2008-07-06 21:32 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Sun, Jul 06, 2008 at 11:04:06PM +0200, Rafael J. Wysocki wrote: > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > On Sun, Jul 06, 2008 at 08:02:45PM +0200, Rafael J. Wysocki wrote: > > > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > > > On Sun, Jul 06, 2008 at 07:05:49PM +0200, Rafael J. Wysocki wrote: > > > > > > > > > > Also, in the next couple of days I'll be closing the bugs the reporters of > > > > > which have been totally unresponsive. > > > > >... > > > > > > > > If no action by us gets combined with automated weekly emails then > > > > no responses to the latter is not an unexpected event. > > > > > > > > Such a submitter might be perfectly responsive to actual work on a bug > > > > while really pissed off by getting the bug closed. > > > > > > > > Look e.g. at #10865 that had a 1 month gap in submitter responses, > > > > but the actual problem is that noone of us ever bothered to look at > > > > this Oops... > > > > > > > > I just did a run through all open 2.6.26-rc regressions, and I did not > > > > find a single one where we seem to be waiting for some time for an > > > > answer of the submitter. [1] > > > > > > The following are my candidates: > > > > > > 10629 > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10629 > > Subject : 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 > > Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Date : 2008-05-05 09:59 (63 days old) > > References : http://lkml.org/lkml/2008/5/5/28 > > Handled-By : Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > > > > > > See below at #10815. > > > > > > > 10786 > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786 > > Subject : parisc: 64bit SMP does not boot on J5600 > > Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Date : 2008-05-22 16:14 (46 days old) > > References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4 > > > > > > Submitter sent bug report, it seems no kernel developer ever bothered > > to answer. > > > > The unresponsive side is not the submitter. > > The report is 46 days old and the reporter has been sent a request to confirm > the presence of the problem every week. Since he hasn't responded to any > of those requests, I assume we're not going to hear from him. Thus, it's not > useful to track this any more. Andrew Morton also never bothered to answer the automated emails you sent him regarding the regression he reported... Humans react differently to programs than to humans interacting with them, and tons of automated mails without any actual efforts by humans can easily be considered a non-friendly act. But for this bug I now found the commit that fixed it back in May. Is there any specific reason why your automated emails only go to the submitters but not to the maintainers of the code in question? If you had Cc'ed Kyle once during the last 46 days he might have remembered that he already fixed this bug... > Thanks, > Rafael cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080706213214.GH21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <20080706213214.GH21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> @ 2008-07-06 21:47 ` Linus Torvalds [not found] ` <alpine.LFD.1.10.0807061443420.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> 2008-07-06 21:47 ` Rafael J. Wysocki 1 sibling, 1 reply; 109+ messages in thread From: Linus Torvalds @ 2008-07-06 21:47 UTC (permalink / raw) To: Adrian Bunk Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Mon, 7 Jul 2008, Adrian Bunk wrote: > > Humans react differently to programs than to humans interacting with > them, and tons of automated mails without any actual efforts by humans > can easily be considered a non-friendly act. Adrian - please just stop this. *DEVELOPERS* are human too. And if you cannot accept the fact that developers need feedback as well as reporters - a simple "is it still a problem" report - then why the *hell* do you then talk about reporters being human? > But for this bug I now found the commit that fixed it back in May. Exactly. A _lot_ of problems are fixed independently of a specific bug-report, either because others reported the issue too (and people didn't necessarily even realize that it was the same problem), or because a developer found it independently and fixed it. > Is there any specific reason why your automated emails only go to the > submitters but not to the maintainers of the code in question? Is there any specific reason that you have been complaining about this for A HELL OF A LONG TIME, without ever actually listening to what people like me tell you, over and over and over again? And no, this email wasn't autogenerated. But you seem to never react to this. Bug-reports absolutely *have* to be closed if they don't get minimal feedback, including just a "it's still a problem". Just accept it, Adrian. Linus ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <alpine.LFD.1.10.0807061443420.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <alpine.LFD.1.10.0807061443420.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> @ 2008-07-06 22:19 ` Adrian Bunk [not found] ` <20080706221932.GJ21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Adrian Bunk @ 2008-07-06 22:19 UTC (permalink / raw) To: Linus Torvalds Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Sun, Jul 06, 2008 at 02:47:42PM -0700, Linus Torvalds wrote: > On Mon, 7 Jul 2008, Adrian Bunk wrote: >... > > Is there any specific reason why your automated emails only go to the > > submitters but not to the maintainers of the code in question? > > Is there any specific reason that you have been complaining about this for > A HELL OF A LONG TIME, without ever actually listening to what people like > me tell you, over and over and over again? >... When did you tell me that maintainers should not or cannot be Cc'ed on regression reports? Sorry, but I honestly don't remember this. You did not complain when I did this when I was doing regression tracking, and if you explained to me why it's now no longer wanted I must have completely missed it. What was the reason? > Just accept it, Adrian. > > Linus cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080706221932.GJ21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <20080706221932.GJ21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> @ 2008-07-06 22:27 ` Linus Torvalds [not found] ` <alpine.LFD.1.10.0807061524510.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Linus Torvalds @ 2008-07-06 22:27 UTC (permalink / raw) To: Adrian Bunk Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Mon, 7 Jul 2008, Adrian Bunk wrote: > > When did you tell me that maintainers should not or cannot be Cc'ed on > regression reports? That is not what I'm complaining about. I'm complaining about the fact that you *always* argue against closing bugreports. You have argued against it for over a YEAR now. And every single time I tell you that you are wrong, and exactly *why* you are wrong. If a reporter doesn't respond to say "it's still open", it needs to be closed. It doesn't matter one whit whether there has been developer action on it or not. We cannot keep old reports open - it's a total waste for developers to even _look_ at anything that is more than roughly a month old and hasn't been verified to be still be an issue. Linus ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <alpine.LFD.1.10.0807061524510.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <alpine.LFD.1.10.0807061524510.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> @ 2008-07-06 23:06 ` Adrian Bunk [not found] ` <20080706230610.GK21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Adrian Bunk @ 2008-07-06 23:06 UTC (permalink / raw) To: Linus Torvalds Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Sun, Jul 06, 2008 at 03:27:30PM -0700, Linus Torvalds wrote: > > > On Mon, 7 Jul 2008, Adrian Bunk wrote: > > > > When did you tell me that maintainers should not or cannot be Cc'ed on > > regression reports? > > That is not what I'm complaining about. That is what I wrote in the part of my email you made this comment on. > I'm complaining about the fact that you *always* argue against closing > bugreports. I'm not always against closing bugs, and e.g. during the last years I've closed at about 500 bugs in the kernel Bugzilla due to submitters having vanished. > You have argued against it for over a YEAR now. And every single time I > tell you that you are wrong, and exactly *why* you are wrong. > > If a reporter doesn't respond to say "it's still open", it needs to be > closed. It doesn't matter one whit whether there has been developer action > on it or not. We cannot keep old reports open - it's a total waste for > developers to even _look_ at anything that is more than roughly a month > old and hasn't been verified to be still be an issue. We only differ on whether a human should ask this question once before closing a bug or whether regular automated requests are enough. E.g. although Andrew has't responded to Rafaels emails for nearly a month whether the slab corruption he reported is still present I wouldn't take this as a definitive indication that he won't answer when someone has a question. I'd bet Andrew will answer if a human asks him about the status of this regression. A developer asking manually "Is this still present?" does cost nearly no time and gives the submitter a much better feeling than only automated emails and then a bug close. > Linus cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080706230610.GK21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <20080706230610.GK21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> @ 2008-07-06 23:55 ` Johannes Weiner [not found] ` <87skumr2jg.fsf-BfM5BwqdGSkPyMaTEpOvjQ@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Johannes Weiner @ 2008-07-06 23:55 UTC (permalink / raw) To: Adrian Bunk Cc: Linus Torvalds, Rafael J. Wysocki, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli Hi, Adrian Bunk <bunk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> writes: > On Sun, Jul 06, 2008 at 03:27:30PM -0700, Linus Torvalds wrote: >> >> >> On Mon, 7 Jul 2008, Adrian Bunk wrote: >> > >> > When did you tell me that maintainers should not or cannot be Cc'ed on >> > regression reports? >> >> That is not what I'm complaining about. > > That is what I wrote in the part of my email you made this comment on. > >> I'm complaining about the fact that you *always* argue against closing >> bugreports. > > I'm not always against closing bugs, and e.g. during the last years I've > closed at about 500 bugs in the kernel Bugzilla due to submitters having > vanished. > >> You have argued against it for over a YEAR now. And every single time I >> tell you that you are wrong, and exactly *why* you are wrong. >> >> If a reporter doesn't respond to say "it's still open", it needs to be >> closed. It doesn't matter one whit whether there has been developer action >> on it or not. We cannot keep old reports open - it's a total waste for >> developers to even _look_ at anything that is more than roughly a month >> old and hasn't been verified to be still be an issue. > > We only differ on whether a human should ask this question once before > closing a bug or whether regular automated requests are enough. I prefer being bugged regularly as a reporter. At the moment I have a bug at a machine I do not use every day and if I get this email, it reminds me to test the latest kernel on that machine (or try to reproduce the bug if it happens in situations not common in my usual workflow). Then I report back. If these remainders weren't, it would be possible that I forget about a bug and come back to it when it's a real pain to hunt it down by change-history or when a possible cause for the bug has left the developers mind a long time ago. Hannes ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <87skumr2jg.fsf-BfM5BwqdGSkPyMaTEpOvjQ@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <87skumr2jg.fsf-BfM5BwqdGSkPyMaTEpOvjQ@public.gmane.org> @ 2008-07-07 8:58 ` Adrian Bunk 0 siblings, 0 replies; 109+ messages in thread From: Adrian Bunk @ 2008-07-07 8:58 UTC (permalink / raw) To: Johannes Weiner Cc: Linus Torvalds, Rafael J. Wysocki, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Mon, Jul 07, 2008 at 01:55:15AM +0200, Johannes Weiner wrote: > Hi, > > Adrian Bunk <bunk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> writes: > > > On Sun, Jul 06, 2008 at 03:27:30PM -0700, Linus Torvalds wrote: > >> > >> > >> On Mon, 7 Jul 2008, Adrian Bunk wrote: > >> > > >> > When did you tell me that maintainers should not or cannot be Cc'ed on > >> > regression reports? > >> > >> That is not what I'm complaining about. > > > > That is what I wrote in the part of my email you made this comment on. > > > >> I'm complaining about the fact that you *always* argue against closing > >> bugreports. > > > > I'm not always against closing bugs, and e.g. during the last years I've > > closed at about 500 bugs in the kernel Bugzilla due to submitters having > > vanished. > > > >> You have argued against it for over a YEAR now. And every single time I > >> tell you that you are wrong, and exactly *why* you are wrong. > >> > >> If a reporter doesn't respond to say "it's still open", it needs to be > >> closed. It doesn't matter one whit whether there has been developer action > >> on it or not. We cannot keep old reports open - it's a total waste for > >> developers to even _look_ at anything that is more than roughly a month > >> old and hasn't been verified to be still be an issue. > > > > We only differ on whether a human should ask this question once before > > closing a bug or whether regular automated requests are enough. > > I prefer being bugged regularly as a reporter. At the moment I have a > bug at a machine I do not use every day and if I get this email, it > reminds me to test the latest kernel on that machine (or try to > reproduce the bug if it happens in situations not common in my usual > workflow). Then I report back. It often depends on the kind of bug. E.g. if you reported "my main computer crashes twice a day" you would be more interested to see some developer actually working on it before reproducing it weekly. > If these remainders weren't, it would be possible that I forget about a > bug and come back to it when it's a real pain to hunt it down by > change-history or when a possible cause for the bug has left the > developers mind a long time ago. You get me wrong. I'm not saying the automated reminders should vanish. But before closing a bug as "reported does not respond" IMHO a manual request should be done first. Otherwise we get people into the "I reported a bug, got only automated emails, and the only action by the developers was to close the bug once I got too annoyed to answer weekly that it's still present." situation. > Hannes cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <20080706213214.GH21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org> 2008-07-06 21:47 ` Linus Torvalds @ 2008-07-06 21:47 ` Rafael J. Wysocki [not found] ` <200807062347.59962.rjw-KKrjLPT3xs0@public.gmane.org> 1 sibling, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 21:47 UTC (permalink / raw) To: Adrian Bunk Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Sunday, 6 of July 2008, Adrian Bunk wrote: > On Sun, Jul 06, 2008 at 11:04:06PM +0200, Rafael J. Wysocki wrote: > > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > > On Sun, Jul 06, 2008 at 08:02:45PM +0200, Rafael J. Wysocki wrote: > > > > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > > > > On Sun, Jul 06, 2008 at 07:05:49PM +0200, Rafael J. Wysocki wrote: > > > > > > > > > > > > Also, in the next couple of days I'll be closing the bugs the reporters of > > > > > > which have been totally unresponsive. > > > > > >... > > > > > > > > > > If no action by us gets combined with automated weekly emails then > > > > > no responses to the latter is not an unexpected event. > > > > > > > > > > Such a submitter might be perfectly responsive to actual work on a bug > > > > > while really pissed off by getting the bug closed. > > > > > > > > > > Look e.g. at #10865 that had a 1 month gap in submitter responses, > > > > > but the actual problem is that noone of us ever bothered to look at > > > > > this Oops... > > > > > > > > > > I just did a run through all open 2.6.26-rc regressions, and I did not > > > > > find a single one where we seem to be waiting for some time for an > > > > > answer of the submitter. [1] > > > > > > > > The following are my candidates: > > > > > > > > 10629 > > > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10629 > > > Subject : 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 > > > Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > > Date : 2008-05-05 09:59 (63 days old) > > > References : http://lkml.org/lkml/2008/5/5/28 > > > Handled-By : Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > > > > > > > > > See below at #10815. > > > > > > > > > > 10786 > > > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786 > > > Subject : parisc: 64bit SMP does not boot on J5600 > > > Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > > Date : 2008-05-22 16:14 (46 days old) > > > References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4 > > > > > > > > > Submitter sent bug report, it seems no kernel developer ever bothered > > > to answer. > > > > > > The unresponsive side is not the submitter. > > > > The report is 46 days old and the reporter has been sent a request to confirm > > the presence of the problem every week. Since he hasn't responded to any > > of those requests, I assume we're not going to hear from him. Thus, it's not > > useful to track this any more. > > Andrew Morton also never bothered to answer the automated emails you > sent him regarding the regression he reported... > > Humans react differently to programs than to humans interacting with > them, and tons of automated mails without any actual efforts by humans > can easily be considered a non-friendly act. > > But for this bug I now found the commit that fixed it back in May. > > Is there any specific reason why your automated emails only go to the > submitters but not to the maintainers of the code in question? Yes, there is. We'd have to add special annotations to bug reports for that and I'm not always sure which list/maintainer combination is appropriate. > If you had Cc'ed Kyle once during the last 46 days he might have remembered > that he already fixed this bug... He might have looked at the regression reports just as well. Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <200807062347.59962.rjw-KKrjLPT3xs0@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <200807062347.59962.rjw-KKrjLPT3xs0@public.gmane.org> @ 2008-07-06 21:56 ` Rafael J. Wysocki [not found] ` <200807062356.47908.rjw-KKrjLPT3xs0@public.gmane.org> 2008-07-06 22:07 ` Adrian Bunk 1 sibling, 1 reply; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 21:56 UTC (permalink / raw) To: Adrian Bunk Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Sunday, 6 of July 2008, Rafael J. Wysocki wrote: > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > On Sun, Jul 06, 2008 at 11:04:06PM +0200, Rafael J. Wysocki wrote: > > > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > > > On Sun, Jul 06, 2008 at 08:02:45PM +0200, Rafael J. Wysocki wrote: > > > > > On Sunday, 6 of July 2008, Adrian Bunk wrote: > > > > > > On Sun, Jul 06, 2008 at 07:05:49PM +0200, Rafael J. Wysocki wrote: > > > > > > > > > > > > > > Also, in the next couple of days I'll be closing the bugs the reporters of > > > > > > > which have been totally unresponsive. > > > > > > >... > > > > > > > > > > > > If no action by us gets combined with automated weekly emails then > > > > > > no responses to the latter is not an unexpected event. > > > > > > > > > > > > Such a submitter might be perfectly responsive to actual work on a bug > > > > > > while really pissed off by getting the bug closed. > > > > > > > > > > > > Look e.g. at #10865 that had a 1 month gap in submitter responses, > > > > > > but the actual problem is that noone of us ever bothered to look at > > > > > > this Oops... > > > > > > > > > > > > I just did a run through all open 2.6.26-rc regressions, and I did not > > > > > > find a single one where we seem to be waiting for some time for an > > > > > > answer of the submitter. [1] > > > > > > > > > > The following are my candidates: > > > > > > > > > > 10629 > > > > > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10629 > > > > Subject : 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 > > > > Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > > > Date : 2008-05-05 09:59 (63 days old) > > > > References : http://lkml.org/lkml/2008/5/5/28 > > > > Handled-By : Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > > > > > > > > > > > > See below at #10815. > > > > > > > > > > > > > 10786 > > > > > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10786 > > > > Subject : parisc: 64bit SMP does not boot on J5600 > > > > Submitter : Domenico Andreoli <cavokz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > > > Date : 2008-05-22 16:14 (46 days old) > > > > References : http://marc.info/?l=linux-kernel&m=121147328028081&w=4 > > > > > > > > > > > > Submitter sent bug report, it seems no kernel developer ever bothered > > > > to answer. > > > > > > > > The unresponsive side is not the submitter. > > > > > > The report is 46 days old and the reporter has been sent a request to confirm > > > the presence of the problem every week. Since he hasn't responded to any > > > of those requests, I assume we're not going to hear from him. Thus, it's not > > > useful to track this any more. > > > > Andrew Morton also never bothered to answer the automated emails you > > sent him regarding the regression he reported... > > > > Humans react differently to programs than to humans interacting with > > them, and tons of automated mails without any actual efforts by humans > > can easily be considered a non-friendly act. BTW, the automated emails I'm sending are to let the reporters know that I'm interested in the current status of the bug. They are free not to reply to them, but in that case I assume they don't really care whether or not I'm tracking the bugs they reported. Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <200807062356.47908.rjw-KKrjLPT3xs0@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <200807062356.47908.rjw-KKrjLPT3xs0@public.gmane.org> @ 2008-07-06 22:10 ` Rene Herman [not found] ` <487142BA.1080508-cENuUygGYd//D1n+0JDH9g@public.gmane.org> 0 siblings, 1 reply; 109+ messages in thread From: Rene Herman @ 2008-07-06 22:10 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Adrian Bunk, Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On 06-07-08 23:56, Rafael J. Wysocki wrote: > BTW, the automated emails I'm sending are to let the reporters know > that I'm interested in the current status of the bug. They are free > not to reply to them, but in that case I assume they don't really > care whether or not I'm tracking the bugs they reported. I did/do wonder by the way when I get them if I should be replying if the status is unchanged from my viewpoint... I believe your automated emails say something like "please verify if this problem is still relevant" but don't spell out what do after you verified that it is. It's sort of natural to take that as "I need to reply telling people it's fixed if it is but can remain silent if nothing changed". Being more explicit about liking a reporter to report "yes, nothing changed" would probably be good if that IS what's wanted. Rene. ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <487142BA.1080508-cENuUygGYd//D1n+0JDH9g@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <487142BA.1080508-cENuUygGYd//D1n+0JDH9g@public.gmane.org> @ 2008-07-06 22:57 ` Rafael J. Wysocki 2008-07-06 23:05 ` Rene Herman [not found] ` <200807070057.51663.rjw-KKrjLPT3xs0@public.gmane.org> 0 siblings, 2 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 22:57 UTC (permalink / raw) To: Rene Herman Cc: Adrian Bunk, Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Monday, 7 of July 2008, Rene Herman wrote: > On 06-07-08 23:56, Rafael J. Wysocki wrote: > > > BTW, the automated emails I'm sending are to let the reporters know > > that I'm interested in the current status of the bug. They are free > > not to reply to them, but in that case I assume they don't really > > care whether or not I'm tracking the bugs they reported. > > I did/do wonder by the way when I get them if I should be replying if > the status is unchanged from my viewpoint... > > I believe your automated emails say something like "please verify if > this problem is still relevant" but don't spell out what do after you > verified that it is. It's sort of natural to take that as "I need to > reply telling people it's fixed if it is but can remain silent if > nothing changed". The exact wording is "The following bug entry is on the current list of known regressions from 2.6.25. Please verify if it still should be listed." > Being more explicit about liking a reporter to report "yes, nothing > changed" would probably be good if that IS what's wanted. Well, I can change it to "Please verify if it still should be listed and let me know." if that's better. Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 2008-07-06 22:57 ` Rafael J. Wysocki @ 2008-07-06 23:05 ` Rene Herman [not found] ` <48714FD0.4090300-cENuUygGYd//D1n+0JDH9g@public.gmane.org> [not found] ` <200807070057.51663.rjw-KKrjLPT3xs0@public.gmane.org> 1 sibling, 1 reply; 109+ messages in thread From: Rene Herman @ 2008-07-06 23:05 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Adrian Bunk, Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On 07-07-08 00:57, Rafael J. Wysocki wrote: >> Being more explicit about liking a reporter to report "yes, nothing >> changed" would probably be good if that IS what's wanted. > > Well, I can change it to > > "Please verify if it still should be listed and let me know." > > if that's better. Or even "please verify that it should still be listed, and let me know either way". Simple "yes" replies feel a little silly, to non-frequent posters at least, without that kind of explicit encouragement so it might make for a few more replies. Rene. ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <48714FD0.4090300-cENuUygGYd//D1n+0JDH9g@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <48714FD0.4090300-cENuUygGYd//D1n+0JDH9g@public.gmane.org> @ 2008-07-06 23:15 ` Rafael J. Wysocki 0 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 23:15 UTC (permalink / raw) To: Rene Herman Cc: Adrian Bunk, Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Monday, 7 of July 2008, Rene Herman wrote: > On 07-07-08 00:57, Rafael J. Wysocki wrote: > > >> Being more explicit about liking a reporter to report "yes, nothing > >> changed" would probably be good if that IS what's wanted. > > > > Well, I can change it to > > > > "Please verify if it still should be listed and let me know." > > > > if that's better. > > Or even "please verify that it should still be listed, and let me know > either way". Okay, I will do this. Thanks, Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <200807070057.51663.rjw-KKrjLPT3xs0@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <200807070057.51663.rjw-KKrjLPT3xs0@public.gmane.org> @ 2008-07-06 23:11 ` Nigel Cunningham 0 siblings, 0 replies; 109+ messages in thread From: Nigel Cunningham @ 2008-07-06 23:11 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Rene Herman, Adrian Bunk, Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli Hi Rafael etc. On Mon, 2008-07-07 at 00:57 +0200, Rafael J. Wysocki wrote: > On Monday, 7 of July 2008, Rene Herman wrote: > > On 06-07-08 23:56, Rafael J. Wysocki wrote: > > > > > BTW, the automated emails I'm sending are to let the reporters know > > > that I'm interested in the current status of the bug. They are free > > > not to reply to them, but in that case I assume they don't really > > > care whether or not I'm tracking the bugs they reported. > > > > I did/do wonder by the way when I get them if I should be replying if > > the status is unchanged from my viewpoint... > > > > I believe your automated emails say something like "please verify if > > this problem is still relevant" but don't spell out what do after you > > verified that it is. It's sort of natural to take that as "I need to > > reply telling people it's fixed if it is but can remain silent if > > nothing changed". > > The exact wording is > > "The following bug entry is on the current list of known regressions > from 2.6.25. Please verify if it still should be listed." > > > Being more explicit about liking a reporter to report "yes, nothing > > changed" would probably be good if that IS what's wanted. > > Well, I can change it to > > "Please verify if it still should be listed and let me know." > > if that's better. > I would suggest that you should assume it's still relevant until the bugzilla entry gets closed. The person fixing the bug should be responsible for modifying the report to say that a patch is available and then has been merged (or for saying it's an invalid report etc). This way, you're making the whole process less burdensome rather than so. Regards, Nigel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <200807062347.59962.rjw-KKrjLPT3xs0@public.gmane.org> 2008-07-06 21:56 ` Rafael J. Wysocki @ 2008-07-06 22:07 ` Adrian Bunk 1 sibling, 0 replies; 109+ messages in thread From: Adrian Bunk @ 2008-07-06 22:07 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley, Domenico Andreoli On Sun, Jul 06, 2008 at 11:47:58PM +0200, Rafael J. Wysocki wrote: > On Sunday, 6 of July 2008, Adrian Bunk wrote: >... > > Is there any specific reason why your automated emails only go to the > > submitters but not to the maintainers of the code in question? > > Yes, there is. We'd have to add special annotations to bug reports for that > and I'm not always sure which list/maintainer combination is appropriate. Then make a wild guess. Long ago when I was doing regression tracking I sometimes added a dozen addresses from 3 different MAINTAINERS entry for one bug report for getting emails to all involved parties. Not sure whether Bugzilla is the right place for maintaining this information, but even if it takes a few minutes to add it to all regression reports when sending the emails it's in my experience worth it. > > If you had Cc'ed Kyle once during the last 46 days he might have remembered > > that he already fixed this bug... > > He might have looked at the regression reports just as well. There is a huge difference between offering information for maintainers that are actively searching for it and regularly annoying maintainers that there's a regression they have forgotten about they should fix... > Thanks, > Rafael cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <alpine.LFD.1.10.0807060816070.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> 2008-07-06 15:58 ` Adrian Bunk @ 2008-07-06 16:11 ` James Bottomley 2008-07-06 16:58 ` Ingo Molnar ` (2 subsequent siblings) 4 siblings, 0 replies; 109+ messages in thread From: James Bottomley @ 2008-07-06 16:11 UTC (permalink / raw) To: Linus Torvalds Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney On Sun, 2008-07-06 at 08:46 -0700, Linus Torvalds wrote: > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10725 > > Subject : USB Mass storage mount fails: Write protect on > > Submitter : Maciej Rutecki <maciej.rutecki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Date : 2008-05-16 14:55 (52 days old) > > References : http://marc.info/?l=linux-kernel&m=121095168003572&w=4 > > Handled-By : Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org> > > Patch : http://marc.info/?l=linux-scsi&m=121433068314568&w=2 > > Hmm. James? Oh ... it was reported against 2.6.26-rc1, so the fix is actually crrently queued for scsi-misc in my internal test rig. However, the reason for the long QA is that there's a potential danger to the fix which is clearing the buffer from the reported length to the actual length will break a SCSI card that misreports the returned length. It seems to be OK on my esoteric SCSI card collection, so I'll push it out to scsi-rc-fixes. However, I think it still wants to run in linux-next for a few days to see if anyone else can turn up a problem. The true issue, of course, is that we won't see a problem until the 2.6.26 release because the hardware that triggers it isn't in the set we're testing with. A less risky fix for 2.6.26-rc9 might be to move the clearing into the affected subsystem (usbstorage). James ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <alpine.LFD.1.10.0807060816070.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> 2008-07-06 15:58 ` Adrian Bunk 2008-07-06 16:11 ` James Bottomley @ 2008-07-06 16:58 ` Ingo Molnar [not found] ` <20080706165810.GA16189-X9Un+BFzKDI@public.gmane.org> 2008-07-07 17:37 ` Pavel Machek 2008-08-01 21:09 ` Paul E. McKenney 4 siblings, 1 reply; 109+ messages in thread From: Ingo Molnar @ 2008-07-06 16:58 UTC (permalink / raw) To: Linus Torvalds Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley * Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote: > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10815 > > Subject : 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 > > Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Date : 2008-05-27 09:23 (41 days old) > > References : http://lkml.org/lkml/2008/5/27/9 > > http://lkml.org/lkml/2008/6/14/87 > > Handled-By : Oleg Nesterov <oleg-6lXkIZvqkOAvJsYlp49lxw@public.gmane.org> > > Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> > > Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > > Patch : http://lkml.org/lkml/2008/5/28/16 > > This one is the same thing that is reported as unresolved, and no, I > don't think that existing patch was ever really tested to fix > anything. Paul? > > I suspect SRCU will need to be simply marked BROKEN for now, because > nobody knows what the problem Alexey sees is. Apparently it's been > seen by a few other people too. I'm not sure it's directly related to SRCU - it can change timings and freeing patterns enough to tickle other bugs. Since Alexey Dobriyan has reported it - are perhaps namespaces in use during this stress-test? Maybe it's some namespaces related bug that is more easily reproduced under SRCU - namespaces is not a commonly tested feature. Also, i've been running rcutorture stress-tests on a number of test-systems ever since this got reported (and they are running currently as well) and cannot see it - neither could Paul reproduce it. ( and Paul is very good in producing RCU related problems - he's triggered and fixed many RCU related problems that no-one else saw before. ) Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <20080706165810.GA16189-X9Un+BFzKDI@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <20080706165810.GA16189-X9Un+BFzKDI@public.gmane.org> @ 2008-08-01 21:09 ` Paul E. McKenney 0 siblings, 0 replies; 109+ messages in thread From: Paul E. McKenney @ 2008-08-01 21:09 UTC (permalink / raw) To: Ingo Molnar Cc: Linus Torvalds, Rafael J. Wysocki, Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, James Bottomley On Sun, Jul 06, 2008 at 06:58:10PM +0200, Ingo Molnar wrote: > > * Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote: > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10815 > > > Subject : 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 > > > Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > > Date : 2008-05-27 09:23 (41 days old) > > > References : http://lkml.org/lkml/2008/5/27/9 > > > http://lkml.org/lkml/2008/6/14/87 > > > Handled-By : Oleg Nesterov <oleg-6lXkIZvqkOAvJsYlp49lxw@public.gmane.org> > > > Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> > > > Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > > > Patch : http://lkml.org/lkml/2008/5/28/16 > > > > This one is the same thing that is reported as unresolved, and no, I > > don't think that existing patch was ever really tested to fix > > anything. Paul? > > > > I suspect SRCU will need to be simply marked BROKEN for now, because > > nobody knows what the problem Alexey sees is. Apparently it's been > > seen by a few other people too. > > I'm not sure it's directly related to SRCU - it can change timings and > freeing patterns enough to tickle other bugs. Since Alexey Dobriyan has > reported it - are perhaps namespaces in use during this stress-test? > Maybe it's some namespaces related bug that is more easily reproduced > under SRCU - namespaces is not a commonly tested feature. I have CONFIG_NAMESPACES=y. Should I also set one or more of CONFIG_UTS_NS, CONFIG_IPC_NS, CONFIG_USER_NS, or CONFIG_PID_NS? What the heck, I will just set them all and pound away on kernbenchx170 and rcutorture. Thanx, Paul > Also, i've been running rcutorture stress-tests on a number of > test-systems ever since this got reported (and they are running > currently as well) and cannot see it - neither could Paul reproduce it. > > ( and Paul is very good in producing RCU related problems - he's > triggered and fixed many RCU related problems that no-one else saw > before. ) > > Ingo ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <alpine.LFD.1.10.0807060816070.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> ` (2 preceding siblings ...) 2008-07-06 16:58 ` Ingo Molnar @ 2008-07-07 17:37 ` Pavel Machek 2008-07-07 18:26 ` Maximilian Engelhardt 2008-08-01 21:09 ` Paul E. McKenney 4 siblings, 1 reply; 109+ messages in thread From: Pavel Machek @ 2008-07-07 17:37 UTC (permalink / raw) To: Linus Torvalds Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, Paul E. McKenney, James Bottomley Hi! > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10919 > > Subject : [regression] display dimming is slow and laggy - Acer Travelmate 661lci > > Submitter : Maximilian Engelhardt <maxi-OwNUvPV92VfddJNmlsFzeA@public.gmane.org> > > Date : 2008-06-14 22:31 (23 days old) > > References : http://marc.info/?l=linux-kernel&m=121348428828320&w=4 > > I wonder if this one could be related. The 'nr_zones' overwriting bug > would result in kswapd not reclaiming any memory asynchronously, so the > kernel would basically be constantly under a low-memory situation, and > processes would be forced to do synchronous reclaim. > > That, in turn, could easily explain laggy operation, especially if it is > something bigger that needs to allocate new memory (not that I know if X > dimming needs to, but I could imagine that it does some double buffering > or whatever). Hmm, but that would mean whole system is slow, right? I'd bet this is ACPI EC problem... Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 2008-07-07 17:37 ` Pavel Machek @ 2008-07-07 18:26 ` Maximilian Engelhardt 0 siblings, 0 replies; 109+ messages in thread From: Maximilian Engelhardt @ 2008-07-07 18:26 UTC (permalink / raw) To: Pavel Machek Cc: Linus Torvalds, Rafael J. Wysocki, Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List, Randy Dunlap, Paul E. McKenney, James Bottomley [-- Attachment #1: Type: text/plain, Size: 1205 bytes --] On Monday 07 July 2008, Pavel Machek wrote: > Hi! > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10919 > > > Subject : [regression] display dimming is slow and laggy - Acer > > > Travelmate 661lci Submitter : Maximilian Engelhardt > > > <maxi@daemonizer.de> > > > Date : 2008-06-14 22:31 (23 days old) > > > References : http://marc.info/?l=linux-kernel&m=121348428828320&w=4 > > > > I wonder if this one could be related. The 'nr_zones' overwriting bug > > would result in kswapd not reclaiming any memory asynchronously, so the > > kernel would basically be constantly under a low-memory situation, and > > processes would be forced to do synchronous reclaim. > > > > That, in turn, could easily explain laggy operation, especially if it is > > something bigger that needs to allocate new memory (not that I know if X > > dimming needs to, but I could imagine that it does some double buffering > > or whatever). > > Hmm, but that would mean whole system is slow, right? > > I'd bet this is ACPI EC problem... I didn't notice anything that my system is slow. Also I think this patch got included in 2.6.26-rc9 but I still have this problem with it. Maxi [-- Attachment #2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 197 bytes --] ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <alpine.LFD.1.10.0807060816070.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> ` (3 preceding siblings ...) 2008-07-07 17:37 ` Pavel Machek @ 2008-08-01 21:09 ` Paul E. McKenney 4 siblings, 0 replies; 109+ messages in thread From: Paul E. McKenney @ 2008-08-01 21:09 UTC (permalink / raw) To: Linus Torvalds Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List, Maximilian Engelhardt, Randy Dunlap, James Bottomley, nickpiggin-/E1597aS9LT0CCvOHzKKcA, adobriyan-Re5JQEeQqe8AvxtiuMwx3w On Sun, Jul 06, 2008 at 08:46:09AM -0700, Linus Torvalds wrote: > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10815 > > Subject : 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 > > Submitter : Alexey Dobriyan <adobriyan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Date : 2008-05-27 09:23 (41 days old) > > References : http://lkml.org/lkml/2008/5/27/9 > > http://lkml.org/lkml/2008/6/14/87 > > Handled-By : Oleg Nesterov <oleg-6lXkIZvqkOAvJsYlp49lxw@public.gmane.org> > > Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> > > Paul E. McKenney <paulmck-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > > Patch : http://lkml.org/lkml/2008/5/28/16 > > This one is the same thing that is reported as unresolved, and no, I don't > think that existing patch was ever really tested to fix anything. Paul? Alexey tested the above patch, and it did not fix his failure (http://lkml.org/lkml/2008/6/15/93). Neither did the patch at http://lkml.org/lkml/2008/6/14/209. I was never able to reproduce Alexey's failure, whether by running LTP in parallel with 170 kernel builds or by running either in parallel with rcutorture. Some enhancements to make rcutorture more vicious were unable to provoke failures. Alexey is able to provoke the failure on a maxcpus=1 configuration, which should narrow things down quite a bit. I dug through assembly, and found no issues at that level. Alexey, would you be willing to send along your vmlinux or disassembly of the RCU functions? In any case, I am working up additional diagnostics. > I suspect SRCU will need to be simply marked BROKEN for now, because > nobody knows what the problem Alexey sees is. Apparently it's been seen by > a few other people too. PREEMPT_RCU is already marked "default n" with a "Say N if you are unsure. Shouldn't that cover it? I don't believe that SRCU is involved, please let me know if I missed something. Nick Piggin mentioned seeing failures similar to Alexey's, and I still need his repeat-by. Nick? Thanx, Paul ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (39 preceding siblings ...) 2008-07-06 15:46 ` Linus Torvalds @ 2008-07-06 21:54 ` Linus Torvalds [not found] ` <alpine.LFD.1.10.0807061453340.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> 2008-07-07 0:51 ` Benjamin Herrenschmidt 41 siblings, 1 reply; 109+ messages in thread From: Linus Torvalds @ 2008-07-06 21:54 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List On Sun, 6 Jul 2008, Rafael J. Wysocki wrote: > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11041 > Subject : All 2.6.26-rcX hang immediately after loading ohci_hcd > Submitter : Andrey Borzenkov <arvidjaar-JGs/UdohzUI@public.gmane.org> > Date : 2008-07-05 7:08 (2 days old) > References : http://marc.info/?l=linux-kernel&m=121524504505805&w=4 > Handled-By : Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> The revert that was confirmed by Andrey to fix this regression is now committed as 09ca8adbe9f724a7e96f512c0039c4c4a1c5dcc0. Linus ^ permalink raw reply [flat|nested] 109+ messages in thread
[parent not found: <alpine.LFD.1.10.0807061453340.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>]
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 [not found] ` <alpine.LFD.1.10.0807061453340.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org> @ 2008-07-06 22:00 ` Rafael J. Wysocki 0 siblings, 0 replies; 109+ messages in thread From: Rafael J. Wysocki @ 2008-07-06 22:00 UTC (permalink / raw) To: Linus Torvalds Cc: Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Natalie Protasevich, Kernel Testers List On Sunday, 6 of July 2008, Linus Torvalds wrote: > > On Sun, 6 Jul 2008, Rafael J. Wysocki wrote: > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11041 > > Subject : All 2.6.26-rcX hang immediately after loading ohci_hcd > > Submitter : Andrey Borzenkov <arvidjaar-JGs/UdohzUI@public.gmane.org> > > Date : 2008-07-05 7:08 (2 days old) > > References : http://marc.info/?l=linux-kernel&m=121524504505805&w=4 > > Handled-By : Linus Torvalds <torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> > > The revert that was confirmed by Andrey to fix this regression is now > committed as 09ca8adbe9f724a7e96f512c0039c4c4a1c5dcc0. Thanks, I have closed the bug. Rafael ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: 2.6.26-rc9: Reported regressions from 2.6.25 2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki ` (40 preceding siblings ...) 2008-07-06 21:54 ` Linus Torvalds @ 2008-07-07 0:51 ` Benjamin Herrenschmidt 41 siblings, 0 replies; 109+ messages in thread From: Benjamin Herrenschmidt @ 2008-07-07 0:51 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Linux Kernel Mailing List, Adrian Bunk, Andrew Morton, Linus Torvalds, Natalie Protasevich, Kernel Testers List On Sun, 2008-07-06 at 13:39 +0200, Rafael J. Wysocki wrote: > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10714 > Subject : powerpc: Badness seen on 2.6.26-rc2 with lockdep > enabled > Submitter : Balbir Singh <balbir-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org> > Date : 2008-05-14 12:57 (54 days old) > References : > http://marc.info/?l=linux-kernel&m=121076917429133&w=4 > Handled-By : Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org> Still can't reproduce that one, waiting to get access to Balbir's machine. Cheers, Ben. ^ permalink raw reply [flat|nested] 109+ messages in thread
end of thread, other threads:[~2008-08-01 21:09 UTC | newest]
Thread overview: 109+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-06 11:39 2.6.26-rc9: Reported regressions from 2.6.25 Rafael J. Wysocki
2008-07-06 11:39 ` [Bug #10493] mips BCM47XX compile error Rafael J. Wysocki
2008-07-06 13:39 ` Adrian Bunk
2008-07-06 11:45 ` [Bug #10860] total system freeze at boot with 2.6.26-rc Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10815] 2.6.26-rc4: RIP find_pid_ns+0x6b/0xa0 Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10786] parisc: 64bit SMP does not boot on J5600 Rafael J. Wysocki
2008-07-10 13:42 ` Domenico Andreoli
[not found] ` <20080710134159.GA4331-sEfEhJr8Tr7lLLHJGgvKiAC/G2K4zDHf@public.gmane.org>
2008-07-24 16:43 ` Domenico Andreoli
2008-07-06 11:45 ` [Bug #10741] bug in `tty: BKL pushdown'? Rafael J. Wysocki
2008-07-06 14:47 ` Johannes Weiner
2008-07-06 11:45 ` [Bug #10726] x86-64 NODES_SHIFT compile failure Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10724] ACPI: EC: GPE storm detected, disabling EC GPE Rafael J. Wysocki
2008-07-06 17:44 ` Justin Mattock
2008-07-06 11:45 ` [Bug #10821] rt25xx: lock dependency warning, association failure, and kmalloc corruption Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10725] USB Mass storage mount fails: Write protect on Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10629] 2.6.26-rc1-$sha1: RIP __d_lookup+0x8c/0x160 Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10843] Display artifacts on XOrg logout with PAT kernel and VESA framebuffer Rafael J. Wysocki
2008-07-06 23:08 ` Frans Pop
2008-07-06 11:45 ` [Bug #10714] powerpc: Badness seen on 2.6.26-rc2 with lockdep enabled Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #11024] 2.6.25 to 2.6.26-rc8 regression (related to ahci and acpi _GTF) Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10954] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f000c Rafael J. Wysocki
2008-07-06 17:47 ` Justin Mattock
2008-07-06 11:45 ` [Bug #11008] after laptop re-dock: usb-storage device no longer detected Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #11009] No console on Riva TNT since 2.6.26-0.rc4 Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10919] [regression] display dimming is slow and laggy - Acer Travelmate 661lci Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10960] 2.6.26-rc: SPARC: Sun Ultra 10 can not boot Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #11039] 2.6.28-rc8-git3 forcedeth WARNING (kills the interface) Rafael J. Wysocki
2008-07-06 13:44 ` Brad Campbell
2008-07-06 11:45 ` [Bug #10955] v2.6.26-rc7: BUG task_struct: Poison overwritten Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10985] backlight doesn't come on after resume with i915 video Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #11040] 2.6.26-rc: host can not shutdown: ata problem Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10971] radeonfb : radeon X800 family support (atombios) Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #11025] [problem] raid performance loss with 2.6.26-rc8 on 32-bit x86 (bisected) Rafael J. Wysocki
2008-07-07 16:16 ` Mel Gorman
[not found] ` <20080707161620.GA30381-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org>
2008-07-07 22:30 ` Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10872] x86_64 boot hang when CONFIG_NUMA=n Rafael J. Wysocki
2008-07-06 18:17 ` Randy Dunlap
[not found] ` <20080706111750.a6d77e81.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2008-07-06 18:33 ` Linus Torvalds
[not found] ` <alpine.LFD.1.10.0807061133230.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>
2008-07-07 6:32 ` Ingo Molnar
[not found] ` <20080707063218.GC23583-X9Un+BFzKDI@public.gmane.org>
2008-07-07 6:57 ` Yinghai Lu
2008-07-07 18:39 ` Randy Dunlap
[not found] ` <20080707113917.6fda3f7d.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2008-07-07 22:40 ` Randy Dunlap
2008-07-08 0:24 ` Yinghai Lu
[not found] ` <86802c440807071724i1a186879h479460ada28e1b26-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-07-08 5:28 ` Randy Dunlap
[not found] ` <20080707222829.d79b6e2f.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2008-07-08 7:07 ` Yinghai Lu
2008-07-08 15:44 ` Randy Dunlap
2008-07-08 19:02 ` Yinghai Lu
[not found] ` <20080707154042.04bb492e.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2008-07-08 5:16 ` Ingo Molnar
[not found] ` <20080708051629.GA12595-X9Un+BFzKDI@public.gmane.org>
2008-07-08 15:39 ` Randy Dunlap
2008-07-07 6:42 ` Ingo Molnar
[not found] ` <20080707064227.GA27622-X9Un+BFzKDI@public.gmane.org>
2008-07-07 7:15 ` Yinghai Lu
2008-07-07 7:24 ` Ingo Molnar
2008-07-06 11:45 ` [Bug #11035] System hangs on 2.6.26-rc8 Rafael J. Wysocki
2008-07-10 12:29 ` Roman Mindalev
[not found] ` <487600B3.2010008-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org>
2008-07-10 18:08 ` Luiz Fernando N. Capitulino
[not found] ` <20080710150841.139c2a71-nIupHZaCssooJnjsDhvDDvd9D2ou9A/h@public.gmane.org>
2008-07-12 15:07 ` Roman Mindalev
2008-07-12 15:48 ` Roman Mindalev
[not found] ` <4878D259.7050403-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org>
2008-07-15 13:40 ` Roman Mindalev
[not found] ` <487CA8E5.8020208-ioAbOcnQCpJeoWH0uzbU5w@public.gmane.org>
2008-07-18 7:11 ` Ingo Molnar
2008-07-18 7:17 ` Nigel Cunningham
[not found] ` <20080718071121.GB6875-X9Un+BFzKDI@public.gmane.org>
2008-07-18 7:28 ` Vegard Nossum
[not found] ` <19f34abd0807180028y2be61c06ueab5fcc305956f80-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-07-18 22:25 ` Ingo Molnar
2008-07-06 11:45 ` [Bug #11006] 2.6.26-rc6: pcmcia stopped working Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10865] Oops trying to mount an ntfs partition on thinkpad Rafael J. Wysocki
2008-07-06 16:07 ` Alex Romosan
2008-07-06 11:45 ` [Bug #11041] All 2.6.26-rcX hang immediately after loading ohci_hcd Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #11023] 2.6.26-rc8-git2 - kernel BUG at mm/page_alloc.c:585 Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10906] repeatable slab corruption with LTP msgctl08 Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10984] MMC print trace information when resume from suspend Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10989] kernel oopses when wiggling the mouse to make it known to hidd Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #11042] build issue #477 for v2.6.26-rc8-290-gb8a0b6c : input_event" [drivers/media/dvb/ttpci/dvb-ttpci.ko] undefined! Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10862] forcedeth: lockdep warning on ethtool -s Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #9791] Clock is running too fast^Wslow using acpi_pm clocksource Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10861] 2.6.26-rc4-git2 - long pause during boot Rafael J. Wysocki
2008-07-06 14:33 ` James Bottomley
[not found] ` <1215354787.4197.1.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-07-06 17:16 ` Rafael J. Wysocki
2008-07-06 11:45 ` [Bug #10957] pata_pcmcia with Sandisk Extreme III 8GB Rafael J. Wysocki
2008-07-06 14:14 ` 2.6.26-rc9: Reported regressions from 2.6.25 Ingo Molnar
2008-07-06 15:46 ` Linus Torvalds
[not found] ` <alpine.LFD.1.10.0807060816070.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>
2008-07-06 15:58 ` Adrian Bunk
2008-07-06 17:05 ` Rafael J. Wysocki
[not found] ` <200807061905.50261.rjw-KKrjLPT3xs0@public.gmane.org>
2008-07-06 17:40 ` Adrian Bunk
[not found] ` <20080706174006.GD21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>
2008-07-06 18:02 ` Rafael J. Wysocki
[not found] ` <200807062002.46863.rjw-KKrjLPT3xs0@public.gmane.org>
2008-07-06 18:26 ` Adrian Bunk
[not found] ` <20080706182648.GE21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>
2008-07-06 21:04 ` Rafael J. Wysocki
[not found] ` <200807062304.07443.rjw-KKrjLPT3xs0@public.gmane.org>
2008-07-06 21:32 ` Adrian Bunk
[not found] ` <20080706213214.GH21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>
2008-07-06 21:47 ` Linus Torvalds
[not found] ` <alpine.LFD.1.10.0807061443420.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>
2008-07-06 22:19 ` Adrian Bunk
[not found] ` <20080706221932.GJ21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>
2008-07-06 22:27 ` Linus Torvalds
[not found] ` <alpine.LFD.1.10.0807061524510.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>
2008-07-06 23:06 ` Adrian Bunk
[not found] ` <20080706230610.GK21669-re2QNgSbS3j4D6uPqz5PAwR5/fbUUdgG@public.gmane.org>
2008-07-06 23:55 ` Johannes Weiner
[not found] ` <87skumr2jg.fsf-BfM5BwqdGSkPyMaTEpOvjQ@public.gmane.org>
2008-07-07 8:58 ` Adrian Bunk
2008-07-06 21:47 ` Rafael J. Wysocki
[not found] ` <200807062347.59962.rjw-KKrjLPT3xs0@public.gmane.org>
2008-07-06 21:56 ` Rafael J. Wysocki
[not found] ` <200807062356.47908.rjw-KKrjLPT3xs0@public.gmane.org>
2008-07-06 22:10 ` Rene Herman
[not found] ` <487142BA.1080508-cENuUygGYd//D1n+0JDH9g@public.gmane.org>
2008-07-06 22:57 ` Rafael J. Wysocki
2008-07-06 23:05 ` Rene Herman
[not found] ` <48714FD0.4090300-cENuUygGYd//D1n+0JDH9g@public.gmane.org>
2008-07-06 23:15 ` Rafael J. Wysocki
[not found] ` <200807070057.51663.rjw-KKrjLPT3xs0@public.gmane.org>
2008-07-06 23:11 ` Nigel Cunningham
2008-07-06 22:07 ` Adrian Bunk
2008-07-06 16:11 ` James Bottomley
2008-07-06 16:58 ` Ingo Molnar
[not found] ` <20080706165810.GA16189-X9Un+BFzKDI@public.gmane.org>
2008-08-01 21:09 ` Paul E. McKenney
2008-07-07 17:37 ` Pavel Machek
2008-07-07 18:26 ` Maximilian Engelhardt
2008-08-01 21:09 ` Paul E. McKenney
2008-07-06 21:54 ` Linus Torvalds
[not found] ` <alpine.LFD.1.10.0807061453340.3016-5CScLwifNT1QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>
2008-07-06 22:00 ` Rafael J. Wysocki
2008-07-07 0:51 ` Benjamin Herrenschmidt
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).