From mboxrd@z Thu Jan 1 00:00:00 1970 From: Felipe Balbi Subject: Re: [regression?] usb: new errors during device detection Date: Sun, 3 Aug 2008 23:35:13 +0300 Message-ID: <20080803203512.GA11185@frodo> References: <200808032211.22483.elendil@planet.nl> Reply-To: me-uiRdBs8odbtmTBlB0Cgj/Q@public.gmane.org Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <200808032211.22483.elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Frans Pop Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Kernel Testers List , Alan Stern , linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Hi, On Sun, Aug 03, 2008 at 10:11:21PM +0200, Frans Pop wrote: > +usb 3-1: new low speed USB device using uhci_hcd and address 2 > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > -usb 3-1: new low speed USB device using uhci_hcd and address 2 > +usb 3-1: device not accepting address 2, error -71 > +hub 3-0:1.0: unable to enumerate USB device on port 1 what is this device attached to this port ? Do you have the device attached before turning on the machine ? Does it happen if you boot without that device attached and attach it afterwards ? Can you please enable CONFIG_USB_DEBUG and resend dmesg output ? thanks, -- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html