From: Eric Sesterhenn <snakebyte-Mmb7MZpHnFY@public.gmane.org>
To: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
Cc: linux-pm-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
vandrove-hnqZr3NxcozrBKCeMvbIDA@public.gmane.org,
Kernel Testers
<kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [linux-pm] Suspend regression, hang after matroxfb
Date: Fri, 30 Jan 2009 13:46:43 +0100 [thread overview]
Message-ID: <20090130124643.GA8394@alice> (raw)
In-Reply-To: <200901292312.44884.rjw-KKrjLPT3xs0@public.gmane.org>
* Rafael J. Wysocki (rjw-KKrjLPT3xs0@public.gmane.org) wrote:
> On Thursday 29 January 2009, Eric Sesterhenn wrote:
> > hi,
> >
> > on this box standby worked with 2.6.28, but is broken with 2.6.29-rc3.
> >
> > Dmesg of startup
> > http://www.cccmz.de/~snakebyte/200.log
> > .config
> > http://www.cccmz.de/~snakebyte/config_200
> >
> > When testing the devices
> >
> > root@computer-desktop:/sys/power# echo devices > pm_test
>
> What happens if you replace 'devices' with 'core' ?
no change, it hangs after matroxfb
root@computer-desktop:/sys/power# echo core > pm_test
root@computer-desktop:/sys/power# echo standby > state
[ 220.808462] PM: Syncing filesystems ... done.
[ 220.825735] PM: Preparing system for standby sleep
[ 220.832295] Freezing user space processes ... (elapsed 0.00 seconds)
done.
[ 220.835975] Freezing remaining freezable tasks ... (elapsed 0.00
seconds) done.
[ 220.837080] PM: Entering standby sleep
[ 220.837709] agpgart-intel 0000:00:00.0: preparing suspend
[ 220.837816] pci 0000:00:01.0: preparing suspend
[ 220.837925] pci 0000:00:07.0: preparing suspend
[ 220.838018] ata_piix 0000:00:07.1: preparing suspend
[ 220.838141] uhci_hcd 0000:00:07.2: preparing suspend
[ 220.838238] piix4_smbus 0000:00:07.3: preparing suspend
[ 220.838363] pci 0000:00:0a.0: preparing suspend
[ 220.838455] aic7xxx 0000:00:0c.0: preparing suspend
[ 220.838577] 8139too 0000:00:0e.0: preparing suspend
[ 220.838672] RIPTIDE 0000:00:12.0: preparing suspend
[ 220.838794] pci 0000:00:12.1: preparing suspend
[ 220.838886] pci 0000:00:12.2: preparing suspend
[ 220.838992] matroxfb 0000:01:00.0: preparing suspend
[ 220.839246] platform pcspkr: preparing suspend
[ 220.839360] platform microcode: preparing suspend
[ 220.839518] vga16fb vga16fb.0: preparing suspend
[ 220.843272] serial8250 serial8250: preparing suspend
[ 220.844125] usb usb1: preparing type suspend, may wakeup
[ 220.844269] i8042 i8042: preparing suspend
[ 220.844417] rtc-test rtc-test.0: preparing suspend
[ 220.844533] rtc-test rtc-test.1: preparing suspend
[ 220.845060] ac97 0-0:unknown codec: legacy suspend
[ 220.845241] fschmd 3-0073: legacy suspend
[ 220.845374] rtc rtc2: legacy class suspend
[ 220.845478] rtc-test rtc-test.1: suspend
[ 220.845580] rtc rtc1: legacy class suspend
[ 220.845735] rtc-test rtc-test.0: suspend
[ 220.845870] rtc rtc0: legacy class suspend
[ 220.846122] serio serio0: legacy suspend
[ 220.846324] i8042 i8042: suspend
[ 220.846774] usb usb1: type suspend, may wakeup
[ 220.846976] sd 2:0:0:0: legacy suspend
[ 220.847282] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 220.848305] sd 2:0:0:0: [sda] Stopping disk
[ 220.965924] scsi 1:0:0:0: legacy suspend
[ 220.966646] serial8250 serial8250: suspend
[ 220.966798] drm card0: legacy class suspend
[ 220.970528] vga16fb vga16fb.0: suspend
[ 220.970724] platform microcode: suspend
[ 220.970869] platform pcspkr: suspend
[ 220.971072] serial 00:08: legacy suspend
[ 220.971871] serial 00:08: disabled
[ 220.972110] pnp 00:07: legacy suspend
[ 220.972249] i8042 kbd 00:06: legacy suspend
[ 220.972413] pnp 00:05: legacy suspend
[ 220.972547] pnp 00:04: legacy suspend
[ 220.972681] rtc_cmos 00:03: legacy suspend, may wakeup
[ 220.972914] pnp 00:02: legacy suspend
[ 220.973050] system 00:01: legacy suspend
[ 220.973209] pnp 00:00: legacy suspend
[ 220.973363] matroxfb 0000:01:00.0: suspend
[ 220.973694] matroxfb 0000:01:00.0: PCI INT A disabled
> If the same, what happens without the matroxfb driver?
It gets a bit further, suspend seems to complete,
but hangs during resume
[ 753.618066] PM: Syncing filesystems ... done.
[ 753.643958] PM: Preparing system for standby sleep
[ 753.660491] Freezing user space processes ... (elapsed 0.00 seconds)
done.
[ 753.664452] Freezing remaining freezable tasks ... (elapsed 0.00
seconds) done.
[ 753.665783] PM: Entering standby sleep
[ 753.666556] agpgart-intel 0000:00:00.0: preparing suspend
[ 753.666777] pci 0000:00:01.0: preparing suspend
[ 753.666987] pci 0000:00:07.0: preparing suspend
[ 753.667185] ata_piix 0000:00:07.1: preparing suspend
[ 753.667420] uhci_hcd 0000:00:07.2: preparing suspend
[ 753.667625] piix4_smbus 0000:00:07.3: preparing suspend
[ 753.667863] pci 0000:00:0a.0: preparing suspend
[ 753.668131] aic7xxx 0000:00:0c.0: preparing suspend
[ 753.668337] 8139too 0000:00:0e.0: preparing suspend
[ 753.668569] RIPTIDE 0000:00:12.0: preparing suspend
[ 753.668771] pci 0000:00:12.1: preparing suspend
[ 753.668982] pci 0000:00:12.2: preparing suspend
[ 753.669179] pci 0000:01:00.0: preparing suspend
[ 753.669539] platform pcspkr: preparing suspend
[ 753.669756] platform microcode: preparing suspend
[ 753.669993] vga16fb vga16fb.0: preparing suspend
[ 753.674075] serial8250 serial8250: preparing suspend
[ 753.675018] usb usb1: preparing type suspend, may wakeup
[ 753.675272] i8042 i8042: preparing suspend
[ 753.675528] rtc-test rtc-test.0: preparing suspend
[ 753.675753] rtc-test rtc-test.1: preparing suspend
[ 753.676448] ac97 0-0:unknown codec: legacy suspend
[ 753.676740] fschmd 0-0073: legacy suspend
[ 753.676955] rtc rtc2: legacy class suspend
[ 753.677166] rtc-test rtc-test.1: suspend
[ 753.677365] rtc rtc1: legacy class suspend
[ 753.683332] rtc-test rtc-test.0: suspend
[ 753.689205] rtc rtc0: legacy class suspend
[ 753.694915] atkbd serio0: legacy suspend
[ 754.128100] i8042 i8042: suspend
[ 754.133805] usb usb1: type suspend, may wakeup
[ 754.139399] sd 2:0:0:0: legacy suspend
[ 754.145221] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 754.151717] sd 2:0:0:0: [sda] Stopping disk
[ 754.274990] scsi 1:0:0:0: legacy suspend
[ 754.281243] serial8250 serial8250: suspend
[ 754.286805] drm card0: legacy class suspend
[ 754.296202] vga16fb vga16fb.0: suspend
[ 754.301830] platform microcode: suspend
[ 754.307463] platform pcspkr: suspend
[ 754.313077] serial 00:08: legacy suspend
[ 754.319331] serial 00:08: disabled
[ 754.324945] pnp 00:07: legacy suspend
[ 754.330555] i8042 kbd 00:06: legacy suspend
[ 754.336173] pnp 00:05: legacy suspend
[ 754.341726] pnp 00:04: legacy suspend
[ 754.347186] rtc_cmos 00:03: legacy suspend, may wakeup
[ 754.352794] pnp 00:02: legacy suspend
[ 754.358162] system 00:01: legacy suspend
[ 754.363547] pnp 00:00: legacy suspend
[ 754.368987] pci 0000:01:00.0: suspend
[ 754.374641] pci 0000:01:00.0: PCI INT A disabled
[ 754.396162] pci 0000:00:12.2: suspend
[ 754.416089] pci 0000:00:12.1: suspend
[ 754.436088] RIPTIDE 0000:00:12.0: suspend
[ 754.442619] RIPTIDE 0000:00:12.0: PCI INT A disabled
[ 754.448788] ACPI handle has no context!
[ 754.468088] 8139too 0000:00:0e.0: suspend
[ 760.226866] ata2.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 760.238259] RIPTIDE 0000:00:12.0: resume
[ 760.249475] ata2.00: ACPI cmd 91/00:3f:00:00:00:af succeeded
[ 760.264115] RIPTIDE 0000:00:12.0: restoring config space at offset
0xf (was 0x1ff, writing 0x10b)
[ 760.286261] RIPTIDE 0000:00:12.0: restoring config space at offset
0x4 (was 0x1, writing 0xe001)
[ 760.308472] RIPTIDE 0000:00:12.0: restoring config space at offset
0x3 (was 0x800000, writing 0x804000)
[ 760.331698] RIPTIDE 0000:00:12.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900101)
[ 760.355924] RIPTIDE 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 761.042233] pci 0000:00:12.1: resume
[ 761.054092] pci 0000:00:12.1: PME# disabled
[ 761.065818] pci 0000:00:12.2: resume
[ 761.076931] pci 0000:00:12.2: PME# disabled
[ 761.087950] pci 0000:01:00.0: resume
[ 761.098465] pci 0000:01:00.0: PME# disabled
[ 761.108609] ata2.00: configured for UDMA/33
[ 761.124376] pci 0000:01:00.0: enabling device (0000 -> 0002)
Greetings, Eric
> > root@computer-desktop:/sys/power# echo standby > state
> >
> > I get this message:
> >
> > [ 174.177445] PM: Preparing system for standby sleep
> > [ 174.182706] Freezing user space processes ... (elapsed 0.00 seconds) done.
> > [ 174.186096] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> > [ 174.186903] PM: Entering standby sleep
> > [ 174.620476] sd 2:0:0:0: [sda] Synchronizing SCSI cache
> > [ 174.621453] sd 2:0:0:0: [sda] Stopping disk
> > [ 174.743784] serial 00:08: disabled
> > [ 174.744389] matroxfb 0000:01:00.0: PCI INT A disabled
> >
> > and the system does not seem to properly suspend / neither wakeup
> >
> > root@computer-desktop:~# lspci
> > 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
> > 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
> > 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
> > 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
> > 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
> > 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
> > 00:0a.0 Ethernet controller: Intel Corporation 82556 EtherExpress PRO/100 Smart (rev 03)
> > 00:0c.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
> > 00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
> > 00:12.0 Multimedia audio controller: Rockwell International Device 4310
> > 00:12.1 Communication controller: Rockwell International Riptide HSF 56k PCI Modem
> > 00:12.2 Input device controller: Rockwell International Device 4312
> > 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 03)
> >
> > root@computer-desktop:~# lsmod
> > Module Size Used by
> > nfsd 217580 13
> > exportfs 4608 1 nfsd
> > nfs 253896 1
> > lockd 66984 2 nfsd,nfs
> > nfs_acl 3328 2 nfsd,nfs
> > auth_rpcgss 36160 2 nfsd,nfs
> > sunrpc 185716 16 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
> > ipv6 252276 10
> > fuse 54188 1
> > unix 25404 96
> >
> > root@computer-desktop:/usr/src/linux# cat /proc/cpuinfo
> > processor : 0
> > vendor_id : GenuineIntel
> > cpu family : 6
> > model : 8
> > model name : Pentium III (Coppermine)
> > stepping : 3
> > cpu MHz : 697.840
> > cache size : 256 KB
> > fdiv_bug : no
> > hlt_bug : no
> > f00f_bug : no
> > coma_bug : no
> > fpu : yes
> > fpu_exception : yes
> > cpuid level : 2
> > wp : yes
> > flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
> > bogomips : 1395.68
> > clflush size : 32
> > power management:
> >
> >
> > After PM_VERBOSE enabled the log changes to this:
> >
> > [ 1968.407273] PM: Syncing filesystems ... done.
> > [ 1968.424490] PM: Preparing system for standby sleep
> > [ 1968.431142] Freezing user space processes ... (elapsed 0.00 seconds) done.
> > [ 1968.434866] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> > [ 1968.435887] PM: Entering standby sleep
> > [ 1968.436580] agpgart-intel 0000:00:00.0: preparing suspend
> > [ 1968.436683] pci 0000:00:01.0: preparing suspend
> > [ 1968.436788] pci 0000:00:07.0: preparing suspend
> > [ 1968.436877] ata_piix 0000:00:07.1: preparing suspend
> > [ 1968.436998] uhci_hcd 0000:00:07.2: preparing suspend
> > [ 1968.437091] piix4_smbus 0000:00:07.3: preparing suspend
> > [ 1968.437213] pci 0000:00:0a.0: preparing suspend
> > [ 1968.437301] aic7xxx 0000:00:0c.0: preparing suspend
> > [ 1968.437420] 8139too 0000:00:0e.0: preparing suspend
> > [ 1968.437511] RIPTIDE 0000:00:12.0: preparing suspend
> > [ 1968.437617] pci 0000:00:12.1: preparing suspend
> > [ 1968.437705] pci 0000:00:12.2: preparing suspend
> > [ 1968.437807] matroxfb 0000:01:00.0: preparing suspend
> > [ 1968.438056] platform pcspkr: preparing suspend
> > [ 1968.438166] platform microcode: preparing suspend
> > [ 1968.438321] vga16fb vga16fb.0: preparing suspend
> > [ 1968.442065] serial8250 serial8250: preparing suspend
> > [ 1968.442857] usb usb1: preparing type suspend, may wakeup
> > [ 1968.442995] i8042 i8042: preparing suspend
> > [ 1968.443144] rtc-test rtc-test.0: preparing suspend
> > [ 1968.443256] rtc-test rtc-test.1: preparing suspend
> > [ 1968.443785] ac97 0-0:unknown codec: legacy suspend
> > [ 1968.443960] fschmd 3-0073: legacy suspend
> > [ 1968.444151] rtc rtc2: legacy class suspend
> > [ 1968.444252] rtc-test rtc-test.1: suspend
> > [ 1968.444351] rtc rtc1: legacy class suspend
> > [ 1968.444501] rtc-test rtc-test.0: suspend
> > [ 1968.444638] rtc rtc0: legacy class suspend
> > [ 1968.444883] atkbd serio0: legacy suspend
> > [ 1968.872096] i8042 i8042: suspend
> > [ 1968.872384] usb usb1: type suspend, may wakeup
> > [ 1968.872581] sd 2:0:0:0: legacy suspend
> > [ 1968.872881] sd 2:0:0:0: [sda] Synchronizing SCSI cache
> > [ 1968.873883] sd 2:0:0:0: [sda] Stopping disk
> > [ 1968.992131] scsi 1:0:0:0: legacy suspend
> > [ 1968.992852] serial8250 serial8250: suspend
> > [ 1968.992997] drm card0: legacy class suspend
> > [ 1968.996728] vga16fb vga16fb.0: suspend
> > [ 1968.996920] platform microcode: suspend
> > [ 1968.997059] platform pcspkr: suspend
> > [ 1968.997256] serial 00:08: legacy suspend
> > [ 1968.998043] serial 00:08: disabled
> > [ 1968.998213] pnp 00:07: legacy suspend
> > [ 1968.998343] i8042 kbd 00:06: legacy suspend
> > [ 1968.998498] pnp 00:05: legacy suspend
> > [ 1968.998626] pnp 00:04: legacy suspend
> > [ 1968.998754] rtc_cmos 00:03: legacy suspend, may wakeup
> > [ 1968.998980] pnp 00:02: legacy suspend
> > [ 1968.999109] system 00:01: legacy suspend
> > [ 1968.999262] pnp 00:00: legacy suspend
> > [ 1968.999410] matroxfb 0000:01:00.0: suspend
> > [ 1968.999737] matroxfb 0000:01:00.0: PCI INT A disabled
> >
> > I am not sure if a bisection makes sense
> > with all those suspend bugs.
>
> No, it doesn't. :-(
>
> Thanks,
> Rafael
next prev parent reply other threads:[~2009-01-30 12:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090129125855.GA4597@alice>
2009-01-29 22:12 ` [linux-pm] Suspend regression, hang after matroxfb Rafael J. Wysocki
[not found] ` <200901292312.44884.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 12:46 ` Eric Sesterhenn [this message]
2009-01-30 21:15 ` Rafael J. Wysocki
[not found] ` <200901302215.28057.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 22:03 ` Rafael J. Wysocki
[not found] ` <200901302303.23143.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 22:09 ` Eric Sesterhenn
2009-01-30 22:06 ` Eric Sesterhenn
2009-01-30 22:27 ` Rafael J. Wysocki
[not found] ` <200901302327.50887.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 22:31 ` Eric Sesterhenn
2009-01-30 22:59 ` Rafael J. Wysocki
[not found] ` <200901302359.18309.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 23:21 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.0901301818400.2785-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2009-01-30 23:40 ` Rafael J. Wysocki
2009-01-30 23:36 ` Eric Sesterhenn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090130124643.GA8394@alice \
--to=snakebyte-mmb7mzphnfy@public.gmane.org \
--cc=kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=rjw-KKrjLPT3xs0@public.gmane.org \
--cc=vandrove-hnqZr3NxcozrBKCeMvbIDA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox