From: Matthias Reichl <hias-vtPv7MOkFPkAvxtiuMwx3w@public.gmane.org>
To: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
Cc: Linux Kernel Mailing List
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Kernel Testers List
<kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
FUJITA Tomonori
<fujita.tomonori-Zyj7fXuS5i5L9jVzuh4AOg@public.gmane.org>
Subject: Re: [Bug #12612] hard lockup when interrupting cdda2wav
Date: Sat, 28 Mar 2009 15:11:25 +0100 [thread overview]
Message-ID: <20090328141125.GA4061@horus.com> (raw)
In-Reply-To: <fnEpM0mQZjO.A.kXF.l8TxJB@chimera>
On Sat, Mar 21, 2009 at 06:07:27PM +0100, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
>
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28. Please verify if it still should
> be listed and let me know (either way).
>
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12612
> Subject : hard lockup when interrupting cdda2wav
> Submitter : Matthias Reichl <hias-vtPv7MOkFPkAvxtiuMwx3w@public.gmane.org>
> Date : 2009-01-28 16:41 (53 days old)
> References : http://marc.info/?l=linux-kernel&m=123316111415677&w=4
> Handled-By : FUJITA Tomonori <fujita.tomonori-Zyj7fXuS5i5L9jVzuh4AOg@public.gmane.org>
> Patch : http://marc.info/?l=linux-scsi&m=123371501613019&w=2
The bug is still present in 2.6.28.9 and in 2.6.29 (see backtraces
below).
so long,
Hias
=============================================
[ INFO: possible recursive locking detected ]
2.6.28.9-dbg #1
---------------------------------------------
swapper/0 is trying to acquire lock:
(&q->__queue_lock){.+..}, at: [<ffffffff8040e3b5>] blk_put_request+0x25/0x60
but task is already holding lock:
(&q->__queue_lock){.+..}, at: [<ffffffff8040e29a>] blk_end_io+0x5a/0xa0
other info that might help us debug this:
1 lock held by swapper/0:
#0: (&q->__queue_lock){.+..}, at: [<ffffffff8040e29a>] blk_end_io+0x5a/0xa0
stack backtrace:
Pid: 0, comm: swapper Not tainted 2.6.28.9-dbg #1
Call Trace:
<IRQ> [<ffffffff8026cd17>] __lock_acquire+0x1797/0x1930
[<ffffffff8026cf4a>] lock_acquire+0x9a/0xe0
[<ffffffff8040e3b5>] blk_put_request+0x25/0x60
[<ffffffff806ab173>] _spin_lock_irqsave+0x43/0x90
[<ffffffff8040e3b5>] blk_put_request+0x25/0x60
[<ffffffff8040e3b5>] blk_put_request+0x25/0x60
[<ffffffff80520644>] sg_finish_rem_req+0xa4/0x100
[<ffffffff80521d98>] sg_rq_end_io+0x278/0x2e0
[<ffffffff8040e041>] end_that_request_last+0x61/0x260
[<ffffffff8040e2a8>] blk_end_io+0x68/0xa0
[<ffffffff80507da1>] scsi_end_request+0x41/0xd0
[<ffffffff80508490>] scsi_io_completion+0x130/0x470
[<ffffffff80413195>] blk_done_softirq+0x75/0x90
[<ffffffff8024890b>] __do_softirq+0x9b/0x180
[<ffffffff80213dd3>] native_sched_clock+0x13/0x70
[<ffffffff8020d6ec>] call_softirq+0x1c/0x30
[<ffffffff8020f175>] do_softirq+0x65/0xa0
[<ffffffff802483a5>] irq_exit+0xa5/0xb0
[<ffffffff8020f467>] do_IRQ+0x107/0x1d0
[<ffffffff8020c7fb>] ret_from_intr+0x0/0xf
<EOI> [<ffffffff80214b86>] mwait_idle+0x56/0x60
[<ffffffff80214b7d>] mwait_idle+0x4d/0x60
[<ffffffff8020b353>] cpu_idle+0x63/0xc0
=============================================
[ INFO: possible recursive locking detected ]
2.6.29-dbg #1
---------------------------------------------
swapper/0 is trying to acquire lock:
(&q->__queue_lock){.+..}, at: [<ffffffff8041a8c5>] blk_put_request+0x25/0x60
but task is already holding lock:
(&q->__queue_lock){.+..}, at: [<ffffffff8041a7aa>] blk_end_io+0x5a/0xa0
other info that might help us debug this:
1 lock held by swapper/0:
#0: (&q->__queue_lock){.+..}, at: [<ffffffff8041a7aa>] blk_end_io+0x5a/0xa0
stack backtrace:
Pid: 0, comm: swapper Not tainted 2.6.29-dbg #1
Call Trace:
<IRQ> [<ffffffff8027109a>] __lock_acquire+0xfda/0x1b70
[<ffffffff806c1c89>] error_exit+0x29/0xb0
[<ffffffff80531e30>] sg_rq_end_io+0x0/0x2e0
[<ffffffff806c4392>] bad_to_user+0xac/0x5c4
[<ffffffff80271cca>] lock_acquire+0x9a/0xe0
[<ffffffff8041a8c5>] blk_put_request+0x25/0x60
[<ffffffff806c1423>] _spin_lock_irqsave+0x43/0x90
[<ffffffff8041a8c5>] blk_put_request+0x25/0x60
[<ffffffff8041a8c5>] blk_put_request+0x25/0x60
[<ffffffff80530934>] sg_finish_rem_req+0xa4/0x100
[<ffffffff805320a8>] sg_rq_end_io+0x278/0x2e0
[<ffffffff8041a52a>] end_that_request_last+0x5a/0x280
[<ffffffff8041a7b8>] blk_end_io+0x68/0xa0
[<ffffffff805186e6>] scsi_io_completion+0x146/0x520
[<ffffffff8041fa65>] blk_done_softirq+0x75/0x90
[<ffffffff8024bcbb>] __do_softirq+0x9b/0x180
[<ffffffff8020d5fc>] call_softirq+0x1c/0x30
[<ffffffff8020f145>] do_softirq+0x65/0xb0
[<ffffffff8024b7e5>] irq_exit+0x85/0xa0
[<ffffffff8020f3e7>] do_IRQ+0xb7/0x1b0
[<ffffffff8020ce53>] ret_from_intr+0x0/0xf
<EOI> [<ffffffff80214436>] mwait_idle+0x86/0x90
[<ffffffff8021442d>] mwait_idle+0x7d/0x90
[<ffffffff8020b417>] cpu_idle+0x67/0xc0
next prev parent reply other threads:[~2009-03-28 14:11 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-21 17:01 2.6.29-rc8-git5: Reported regressions 2.6.27 -> 2.6.28 Rafael J. Wysocki
2009-03-21 17:01 ` [Bug #12061] snd_hda_intel: power_save: sound cracks on powerdown Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12411] 2.6.28: BUG in r8169 Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12209] oldish top core dumps (in its meminfo() function) Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12421] GPF on 2.6.28 and 2.6.28-rc9-git3, e1000e and e1000 issues Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12404] Oops in 2.6.28-rc9 and -rc8 -- mtrr issues / e1000e Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12208] uml is very slow on 2.6.28 host Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12612] hard lockup when interrupting cdda2wav Rafael J. Wysocki
2009-03-28 14:11 ` Matthias Reichl [this message]
[not found] ` <20090328141125.GA4061-vtPv7MOkFPkAvxtiuMwx3w@public.gmane.org>
2009-03-30 11:40 ` FUJITA Tomonori
2009-03-21 17:07 ` [Bug #12500] r8169: NETDEV WATCHDOG: eth0 (r8169): transmit timed out Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12465] KVM guests stalling on 2.6.28 (bisected) Rafael J. Wysocki
2009-03-21 19:50 ` Ingo Molnar
2009-03-21 17:07 ` [Bug #12426] TMDC Joystick no longer works in kernel 2.6.28 Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12634] video distortion and lockup with i830 video chip and 2.6.28.3 Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12645] DMI low-memory-protect quirk causes resume hang on Samsung NC10 Rafael J. Wysocki
2009-03-21 19:51 ` Ingo Molnar
2009-03-21 17:07 ` [Bug #12619] Regression 2.6.28 and last - boot failed Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12818] iwlagn broken after suspend to RAM (iwlagn: MAC is in deep sleep!) Rafael J. Wysocki
2009-03-23 19:01 ` Stefan Seyfried
2009-03-21 17:07 ` [Bug #12868] iproute2 and regressing "ipv6: convert tunnels to net_device_ops" Rafael J. Wysocki
2009-03-21 20:16 ` Bjørn Mork
2009-03-21 17:07 ` [Bug #12690] DPMS (LCD powersave, poweroff) don't work Rafael J. Wysocki
2009-03-21 17:07 ` [Bug #12911] Limiting cpu time doesn't work Rafael J. Wysocki
-- strict thread matches above, loose matches on Subject: below --
2009-03-14 19:11 2.6.29-rc8: Reported regressions 2.6.27 -> 2.6.28 Rafael J. Wysocki
2009-03-14 19:20 ` [Bug #12612] hard lockup when interrupting cdda2wav Rafael J. Wysocki
2009-03-17 0:53 ` FUJITA Tomonori
[not found] ` <20090317095254P.fujita.tomonori-Zyj7fXuS5i5L9jVzuh4AOg@public.gmane.org>
2009-03-17 14:52 ` James Bottomley
2009-03-03 19:34 2.6.29-rc6-git7: Reported regressions 2.6.27 -> 2.6.28 Rafael J. Wysocki
2009-03-03 19:41 ` [Bug #12612] hard lockup when interrupting cdda2wav Rafael J. Wysocki
2009-02-23 22:00 2.6.29-rc6: Reported regressions 2.6.27 -> 2.6.28 Rafael J. Wysocki
2009-02-23 22:03 ` [Bug #12612] hard lockup when interrupting cdda2wav Rafael J. Wysocki
2009-02-14 20:48 2.6.29-rc5: Reported regressions 2.6.27 -> 2.6.28 Rafael J. Wysocki
2009-02-14 20:50 ` [Bug #12612] hard lockup when interrupting cdda2wav Rafael J. Wysocki
2009-02-17 17:16 ` Matthias Reichl
[not found] ` <20090217171601.GA3351-vtPv7MOkFPkAvxtiuMwx3w@public.gmane.org>
2009-02-17 20:23 ` Rafael J. Wysocki
[not found] ` <200902172123.13052.rjw-KKrjLPT3xs0@public.gmane.org>
2009-02-19 13:49 ` FUJITA Tomonori
2009-02-04 10:55 2.6.29-rc3-git6: Reported regressions 2.6.27 -> 2.6.28 Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12612] hard lockup when interrupting cdda2wav Rafael J. Wysocki
2009-02-05 13:16 ` Matthias Reichl
2009-02-05 16:10 ` Rafael J. Wysocki
[not found] ` <20090205131644.GA5731-vtPv7MOkFPkAvxtiuMwx3w@public.gmane.org>
2009-02-06 7:33 ` FUJITA Tomonori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090328141125.GA4061@horus.com \
--to=hias-vtpv7mokfpkavxtiumwx3w@public.gmane.org \
--cc=fujita.tomonori-Zyj7fXuS5i5L9jVzuh4AOg@public.gmane.org \
--cc=kernel-testers-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rjw-KKrjLPT3xs0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).