[2.6.28-rc1] sd I/O errors

[2.6.28-rc1] sd I/O errors

[Roman Mindalev]

[-- Attachment #1: Type: text/plain, Size: 836 bytes --]

Hi.
I'm got strange errors on startup with HDD and new kernel:
[4.528333] sd 0:0:0:0 [sda] Write protect: off
[4.528609] sd 0:0:0:0 [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[4.528788] sda: <3>sd 0:0:0:0 timing out command, waited 180 s
[184.530108] sd 0:0:0:0 [sda] Result: hostbyte=0x00 driverbyte=0x00
[184.530249] end_request: I/O error, dev sda, sector 0
[184.530354] Buffer I/O error on device sda, logical block 0
[364.533812] unable to read partition table
[364.535118] sd 0:0:0:0: [sda] Attached SCSI disk
[364.536862] sd 0:0:0:0: Attached SCSI generic sg0 type0
[386.543348] SCSI 1:0:0:0 timing out command, waited 22s
And similar picture with sdb.
sda is 80Gb IDE hard drive, sdb - 320Gb SATA, motherboard with Intel
ICH5 chipset

Compiled on base of config from 2.6.27, but it working nice

[-- Attachment #2: config-2.6.27.tar.gz --]
[-- Type: application/x-gzip, Size: 13250 bytes --]

[-- Attachment #3: config-2.6.28-rc1.tar.gz --]
[-- Type: application/x-gzip, Size: 13803 bytes --]

[-- Attachment #4: lspci.tar.gz --]
[-- Type: application/x-gzip, Size: 2205 bytes --]

Re: [2.6.28-rc1] sd I/O errors

[Alan Jenkins]

Roman Mindalev wrote:
> Hi.
> I'm got strange errors on startup with HDD and new kernel:
> [4.528333] sd 0:0:0:0 [sda] Write protect: off
> [4.528609] sd 0:0:0:0 [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [4.528788] sda: <3>sd 0:0:0:0 timing out command, waited 180 s
> [184.530108] sd 0:0:0:0 [sda] Result: hostbyte=0x00 driverbyte=0x00
> [184.530249] end_request: I/O error, dev sda, sector 0
> [184.530354] Buffer I/O error on device sda, logical block 0
> [364.533812] unable to read partition table
> [364.535118] sd 0:0:0:0: [sda] Attached SCSI disk
> [364.536862] sd 0:0:0:0: Attached SCSI generic sg0 type0
> [386.543348] SCSI 1:0:0:0 timing out command, waited 22s
> And similar picture with sdb.
> sda is 80Gb IDE hard drive, sdb - 320Gb SATA, motherboard with Intel
> ICH5 chipset
>
> Compiled on base of config from 2.6.27, but it working nice

I guess this is using the ata_piix driver.  It's almost certainly the
same issue as:

[Regression] 2.6.28-rc1 (2fca5c): libata: kernel cant boot

(search for it).  A patch was posted just after rc1 was released :).

Alan

Re: [2.6.28-rc1] sd I/O errors

[Alexey Fisher]

On Friday 24 October 2008 18:24:11 Alan Jenkins wrote:
> I guess this is using the ata_piix driver.  It's almost certainly the
> same issue as:
>
> [Regression] 2.6.28-rc1 (2fca5c): libata: kernel cant boot
>
> (search for it).  A patch was posted just after rc1 was released :).
>
> Alan

Great! i just bisected it.... :( :)

Re: [2.6.28-rc1] sd I/O errors

[Roman Mindalev]

Alexey Fisher wrote:
> On Friday 24 October 2008 18:24:11 Alan Jenkins wrote:
>> I guess this is using the ata_piix driver.  It's almost certainly the
>> same issue as:
>>
>> [Regression] 2.6.28-rc1 (2fca5c): libata: kernel cant boot
>>
>> (search for it).  A patch was posted just after rc1 was released :).
>>
>> Alan
> 
> Great! i just bisected it.... :( :)
> 
Funny, I began too late and not finished ;)
Patch works for me