2.6.30-rc8-git4: Reported regressions from 2.6.29

2.6.30-rc8-git4: Reported regressions from 2.6.29

[Rafael J. Wysocki]

This message contains a list of some regressions from 2.6.29, for which there
are no fixes in the mainline I know of.  If any of them have been fixed already,
please let me know.

If you know of any other unresolved regressions from 2.6.29, please let me know
either and I'll add them to the list.  Also, please let me know if any of the
entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-06-07      110       35          31
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13475
Subject		: suspend/hibernate lockdep warning
Submitter	: Dave Young <hidave.darkstar@gmail.com>
Date		: 2009-06-02 10:00 (6 days old)
References	: http://marc.info/?l=linux-kernel&m=124393723321241&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13474
Subject		: Oops whilst booting
Submitter	: Chris Clayton <chris2553@googlemail.com>
Date		: 2009-06-06 18:59 (2 days old)
References	: http://marc.info/?l=linux-kernel&m=124431487924254&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13473
Subject		: Bug while trying to launch a KVM guest
Submitter	: Sachin Sant <sachinp@in.ibm.com>
Date		: 2009-06-05 17:20 (3 days old)
References	: http://marc.info/?l=linux-kernel&m=124422173129047&w=4
Handled-By	: Mimi Zohar <zohar@us.ibm.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13472
Subject		: Oops with minicom and USB serial
Submitter	: Peter Chubb <peterc@gelato.unsw.edu.au>
Date		: 2009-06-05 1:37 (3 days old)
References	: http://marc.info/?l=linux-kernel&m=124416901026700&w=4
Handled-By	: Alan Stern <stern@rowland.harvard.edu>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13471
Subject		: Loading parport_pc kills the keyboard if ACPI is enabled
Submitter	: Ozan Çağlayan <ozan@pardus.org.tr>
Date		: 2009-06-04 9:12 (4 days old)
References	: http://marc.info/?l=linux-kernel&m=124410667532558&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13446
Subject		: resume after suspend-to-ram broken on Toshiba Satellite A100 with 2.6.30-rc8 (works in 2.6.28)
Submitter	: Andrea Iob <andrea_iob@yahoo.it>
Date		: 2009-06-03 21:42 (5 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13424
Subject		: possible deadlock when doing governor switching
Submitter	: Shaohua Li <shaohua.li@intel.com>
Date		: 2009-05-31 16:36 (8 days old)
References	: http://www.spinics.net/lists/cpufreq/msg00711.html
Handled-By	: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg@gmail.com>
Date		: 2009-05-30 18:51 (9 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz@fias.uni-frankfurt.de>
Date		: 2009-05-28 7:59 (11 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard@free.fr>
Date		: 2009-05-28 18:43 (11 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13391
Subject		: Kernel boot hangs at about every second start when kms is activated
Submitter	: Martin Bammer <mrb74@gmx.at>
Date		: 2009-05-26 21:47 (13 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel@t-online.de>
Date		: 2009-05-23 8:52 (16 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4
		  http://lkml.org/lkml/2009/5/29/389


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2009-05-23 5:08 (16 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13366
Subject		: About 80% of shutdowns fail (blocking)
Submitter	: Martin Bammer <mrb74@gmx.at>
Date		: 2009-05-23 00:58 (16 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira@gmail.com>
Date		: 2009-05-22 13:32 (17 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu@googlemail.com>
Date		: 2009-05-20 14:09 (19 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai@kernel.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick@ostenberg.de>
Date		: 2009-05-19 09:08 (20 days old)
Handled-By	: Rusty Russell <rusty@rustcorp.com.au>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13337
Subject		: [post 2.6.29 regression] hang during suspend of b44/b43 modules
Submitter	: Tomas Janousek <tomi@nomi.cz>
Date		: 2009-05-18 10:59 (21 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13330
Subject		: nfs4 NULL pointer dereference in _nfs4_do_setlk
Submitter	: Rich Ercolani <rercola@acm.jhu.edu>
Date		: 2009-05-17 04:44 (22 days old)
Handled-By	: Trond Myklebust <trond.myklebust@fys.uio.no>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (36 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (40 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
Handled-By	: Johannes Berg <johannes@sipsolutions.net>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime@gmx.de>
Date		: 2009-04-30 8:51 (39 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13313
Subject		: vm86old oops
Submitter	: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
Date		: 2009-05-14 21:53 (25 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2009-05-14 09:34 (25 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13277
Subject		: 2.6.30 regression - unreliable resume - bisected - Thinkpad X40
Submitter	: Daniel Vetter <daniel@ffwll.ch>
Date		: 2009-05-11 10:08 (28 days old)
Handled-By	: Len Brown <len.brown@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Since kernel 2.6.30-rc1, computers hangs randomly ..
Submitter	: David Hill <hilld@binarystorm.net>
Date		: 2009-05-01 16:57 (38 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts@gmail.com>
Date		: 2009-04-21 21:35 (48 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13179
Subject		: CD-R: wodim intermittent failures
Submitter	: Andy Isaacson <adi@hexapodia.org>
Date		: 2009-04-21 1:52 (48 days old)
References	: http://marc.info/?l=linux-kernel&m=124027879214231&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13119
Subject		: Trouble with make-install from a NFS mount
Submitter	: Gregory Haskins <ghaskins@novell.com>
Date		: 2009-04-14 21:32 (55 days old)
References	: http://marc.info/?l=linux-kernel&m=123974482327044&w=4
Handled-By	: H. Peter Anvin <hpa@zytor.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13116
Subject		: Can't boot with nosmp
Submitter	: Stephen Hemminger <shemminger@vyatta.com>
Date		: 2009-04-15 4:18 (54 days old)
References	: http://marc.info/?l=linux-kernel&m=123976917817920&w=4
Handled-By	: Dan Williams <dan.j.williams@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista@gmail.com>
Date		: 2009-04-11 14:56 (58 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang@intel.com>
		  Alexey Starikovskiy <astarikovskiy@suse.de>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13470
Subject		: Machine doesn't boot due to mmconfig detection problem
Submitter	: Pascal Terjan <pterjan@mandriva.com>
Date		: 2009-05-29 19:35 (10 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=044cd80942e47b9de0915b627902adf05c52377f
References	: http://marc.info/?l=linux-kernel&m=124388792118481&w=4
Handled-By	: Yinghai Lu <yinghai@kernel.org>
Patch		: http://patchwork.kernel.org/patch/27613/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13462
Subject		: Unused bands in intefb console and smaller 180x56 -> 128x48
Submitter	: Santi <santi@agolina.net>
Date		: 2009-06-05 16:30 (3 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c9fb15f60eb517c958dec64dca9357bf62bf2201
Handled-By	: Keith Packard <keithp@keithp.com>
Patch		: http://bugzilla.kernel.org/show_bug.cgi?id=13462#c2


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13423
Subject		: JMicron SATA controller not available
Submitter	: Marc Dionne <marc.c.dionne@gmail.com>
Date		: 2009-05-26 22:56 (13 days old)
References	: http://lkml.org/lkml/2009/5/26/687
Handled-By	: Yu Zhao <yu.zhao@intel.com>
Patch		: http://lkml.org/lkml/2009/5/27/402


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2009-05-26 15:24 (13 days old)
Handled-By	: Frans Pop <elendil@planet.nl>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.29,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Bug #13109] High latency on /sys/class/thermal

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-11 14:56 (58 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
		  Alexey Starikovskiy <astarikovskiy-l3A5Bk7waGM@public.gmane.org>

[Bug #13180] 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-21 21:35 (48 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290

[Bug #13119] Trouble with make-install from a NFS mount

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13119
Subject		: Trouble with make-install from a NFS mount
Submitter	: Gregory Haskins <ghaskins-Et1tbQHTxzrQT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-14 21:32 (55 days old)
References	: http://marc.info/?l=linux-kernel&m=123974482327044&w=4
Handled-By	: H. Peter Anvin <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>

[Bug #13116] Can't boot with nosmp

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13116
Subject		: Can't boot with nosmp
Submitter	: Stephen Hemminger <shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-15 4:18 (54 days old)
References	: http://marc.info/?l=linux-kernel&m=123976917817920&w=4
Handled-By	: Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

Re: [Bug #13116] Can't boot with nosmp

[Stephen Hemminger]

On Sun,  7 Jun 2009 11:52:49 +0200 (CEST)
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13116
> Subject		: Can't boot with nosmp
> Submitter	: Stephen Hemminger <shemminger@vyatta.com>
> Date		: 2009-04-15 4:18 (54 days old)
> References	: http://marc.info/?l=linux-kernel&m=123976917817920&w=4
> Handled-By	: Dan Williams <dan.j.williams@intel.com>
> 
> 

I suspect this bit of code in dmaengine is the culprit:

	/* redistribute available channels */
	n = 0;
	for_each_dma_cap_mask(cap, dma_cap_mask_all)
		for_each_online_cpu(cpu) {
			if (num_possible_cpus() > 1)
				chan = nth_chan(cap, n++);
			else
				chan = nth_chan(cap, -1);

Why does num_possible_cpus() == 1 have to be a special case?
-- 

Re: [Bug #13116] Can't boot with nosmp

[Dan Williams]

On Mon, Jun 8, 2009 at 9:15 AM, Stephen Hemminger<shemminger@vyatta.com> wrote:
> On Sun,  7 Jun 2009 11:52:49 +0200 (CEST)
> "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
>
>> This message has been generated automatically as a part of a report
>> of recent regressions.
>>
>> The following bug entry is on the current list of known regressions
>> from 2.6.29.  Please verify if it still should be listed and let me know
>> (either way).
>>
>>
>> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=13116
>> Subject               : Can't boot with nosmp
>> Submitter     : Stephen Hemminger <shemminger@vyatta.com>
>> Date          : 2009-04-15 4:18 (54 days old)
>> References    : http://marc.info/?l=linux-kernel&m=123976917817920&w=4
>> Handled-By    : Dan Williams <dan.j.williams@intel.com>
>>
>>
>
> I suspect this bit of code in dmaengine is the culprit:
>
>        /* redistribute available channels */
>        n = 0;
>        for_each_dma_cap_mask(cap, dma_cap_mask_all)
>                for_each_online_cpu(cpu) {
>                        if (num_possible_cpus() > 1)
>                                chan = nth_chan(cap, n++);
>                        else
>                                chan = nth_chan(cap, -1);
>
> Why does num_possible_cpus() == 1 have to be a special case?

When there will only be one cpu the channel allocation policy changes from:
"isolate a channel per cpu"
...to:
"isolate a capability per channel".

For example, isolating per channel allows a memcpy to run concurrently
with an xor.

Re: [Bug #13116] Can't boot with nosmp

[Stephen Hemminger]

I did some more debugging, and the problem appears to be that
booting with nosmp still leaves all the CPU's present in the cpu
possible mask. So code like dma engine (or loopback device), that
use alloc_percpu get broken.

Not sure why all the cpu's are still showing up in the possible mask.
Rusty? do you have an answer.

Re: [Bug #13116] Can't boot with nosmp

[Dan Williams]

On Mon, Jun 8, 2009 at 5:04 PM, Stephen Hemminger<shemminger@vyatta.com> wrote:
> I did some more debugging, and the problem appears to be that
> booting with nosmp still leaves all the CPU's present in the cpu
> possible mask. So code like dma engine (or loopback device), that
> use alloc_percpu get broken.
>
> Not sure why all the cpu's are still showing up in the possible mask.
> Rusty? do you have an answer.

Would this recent commit also fix this issue?

commit a4c0364be3f43d3e17fe19270f8b3d64881606e6
Author: Avi Kivity <avi@redhat.com>
Date:   Sat Jun 6 12:34:39 2009 +0300

    KVM: Explicity initialize cpus_hardware_enabled

    Under CONFIG_MAXSMP, cpus_hardware_enabled is allocated from the heap and
    not statically initialized.  This causes a crash on reboot when kvm thinks
    vmx is enabled on random nonexistent cpus and accesses nonexistent percpu
    lists.

    Fix by explicitly clearing the variable.

    Cc: stable@kernel.org
    Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org>
    Signed-off-by: Avi Kivity <avi@redhat.com>

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 1ecbe23..4293528 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2305,6 +2305,7 @@ int kvm_init(void *opaque, unsigned int vcpu_size,
                r = -ENOMEM;
                goto out_free_0;
        }
+       cpumask_clear(cpus_hardware_enabled);

        r = kvm_arch_hardware_setup();
        if (r < 0)

Re: [Bug #13116] Can't boot with nosmp

[Avi Kivity]

Dan Williams wrote:
> On Mon, Jun 8, 2009 at 5:04 PM, Stephen Hemminger<shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public.gmane.org> wrote:
>   
>> I did some more debugging, and the problem appears to be that
>> booting with nosmp still leaves all the CPU's present in the cpu
>> possible mask. So code like dma engine (or loopback device), that
>> use alloc_percpu get broken.
>>
>> Not sure why all the cpu's are still showing up in the possible mask.
>> Rusty? do you have an answer.
>>     
>
> Would this recent commit also fix this issue?
>
> commit a4c0364be3f43d3e17fe19270f8b3d64881606e6
> Author: Avi Kivity <avi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Date:   Sat Jun 6 12:34:39 2009 +0300
>
>     KVM: Explicity initialize cpus_hardware_enabled
>
>     Under CONFIG_MAXSMP, cpus_hardware_enabled is allocated from the heap and
>     not statically initialized.  This causes a crash on reboot when kvm thinks
>     vmx is enabled on random nonexistent cpus and accesses nonexistent percpu
>     lists.
>
>     Fix by explicitly clearing the variable.
>
>     Cc: stable-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
>     Reported-and-tested-by: Yinghai Lu <yinghai-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>     Signed-off-by: Avi Kivity <avi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>   

This only affects reboots.  But yes, the cpumask code has bugs.  Does 
the .config involved select MAXSMP?

-- 
I have a truly marvellous patch that fixes the bug which this
signature is too narrow to contain.

Re: [Bug #13116] Can't boot with nosmp

[Stephen Hemminger]

On Tue, 09 Jun 2009 21:30:43 +0300
Avi Kivity <avi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:

> Dan Williams wrote:
> > On Mon, Jun 8, 2009 at 5:04 PM, Stephen Hemminger<shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public.gmane.org> wrote:
> >   
> >> I did some more debugging, and the problem appears to be that
> >> booting with nosmp still leaves all the CPU's present in the cpu
> >> possible mask. So code like dma engine (or loopback device), that
> >> use alloc_percpu get broken.
> >>
> >> Not sure why all the cpu's are still showing up in the possible mask.
> >> Rusty? do you have an answer.
> >>     
> >
> > Would this recent commit also fix this issue?
> >
> > commit a4c0364be3f43d3e17fe19270f8b3d64881606e6
> > Author: Avi Kivity <avi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> > Date:   Sat Jun 6 12:34:39 2009 +0300
> >
> >     KVM: Explicity initialize cpus_hardware_enabled
> >
> >     Under CONFIG_MAXSMP, cpus_hardware_enabled is allocated from the heap and
> >     not statically initialized.  This causes a crash on reboot when kvm thinks
> >     vmx is enabled on random nonexistent cpus and accesses nonexistent percpu
> >     lists.
> >
> >     Fix by explicitly clearing the variable.
> >
> >     Cc: stable-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
> >     Reported-and-tested-by: Yinghai Lu <yinghai-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> >     Signed-off-by: Avi Kivity <avi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> >   
> 
> This only affects reboots.  But yes, the cpumask code has bugs.  Does 
> the .config involved select MAXSMP?
> 

Patch does not fix the problem. Not sure if it is KVM only problem.
Look like possible cpumask always equals what ACPI / SMP tables report.
So currently looking into alloc_percpu which may not handle the possible
but never used cpus.

It is x86-64 config and does not have MAXSMP set. It does have NR_CPUS set.

-- 

Re: [Bug #13116] Can't boot with nosmp

[Avi Kivity]

Stephen Hemminger wrote:

  

>> This only affects reboots.  But yes, the cpumask code has bugs.  Does 
>> the .config involved select MAXSMP?
>>
>>     
>
> Patch does not fix the problem. Not sure if it is KVM only problem.
> Look like possible cpumask always equals what ACPI / SMP tables report.
> So currently looking into alloc_percpu which may not handle the possible
> but never used cpus.
>
>   

Right, it shouldn't have.

> It is x86-64 config and does not have MAXSMP set. It does have NR_CPUS set.
>   

So it's not cpumask.  Dare I suggest a bisect?

-- 
I have a truly marvellous patch that fixes the bug which this
signature is too narrow to contain.

Re: [Bug #13116] Can't boot with nosmp

[Stephen Hemminger]

On Tue, 09 Jun 2009 21:42:55 +0300
Avi Kivity <avi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:

> Stephen Hemminger wrote:
> 
>   
> 
> >> This only affects reboots.  But yes, the cpumask code has bugs.  Does 
> >> the .config involved select MAXSMP?
> >>
> >>     
> >
> > Patch does not fix the problem. Not sure if it is KVM only problem.
> > Look like possible cpumask always equals what ACPI / SMP tables report.
> > So currently looking into alloc_percpu which may not handle the possible
> > but never used cpus.
> >
> >   
> 
> Right, it shouldn't have.
> 
> > It is x86-64 config and does not have MAXSMP set. It does have NR_CPUS set.
> >   
> 
> So it's not cpumask.  Dare I suggest a bisect?
> 

I did some testing of different versions.

* Problem does not exist with 2.6.30-rc8 (so regression should be closed).

* Problem does exist with 2.6.29.4

* Happens with both nosmp and maxcpus=1


Given that it is fixed in 2.6.30, at this point there really is no urgency
to spend more time investigating the issue. There are certainly bigger problems
to deal with.

-- 

Re: [Bug #13116] Can't boot with nosmp

[Rafael J. Wysocki]

On Tuesday 09 June 2009, Stephen Hemminger wrote:
> On Tue, 09 Jun 2009 21:42:55 +0300
> Avi Kivity <avi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
> 
> > Stephen Hemminger wrote:
> > 
> >   
> > 
> > >> This only affects reboots.  But yes, the cpumask code has bugs.  Does 
> > >> the .config involved select MAXSMP?
> > >>
> > >>     
> > >
> > > Patch does not fix the problem. Not sure if it is KVM only problem.
> > > Look like possible cpumask always equals what ACPI / SMP tables report.
> > > So currently looking into alloc_percpu which may not handle the possible
> > > but never used cpus.
> > >
> > >   
> > 
> > Right, it shouldn't have.
> > 
> > > It is x86-64 config and does not have MAXSMP set. It does have NR_CPUS set.
> > >   
> > 
> > So it's not cpumask.  Dare I suggest a bisect?
> > 
> 
> I did some testing of different versions.
> 
> * Problem does not exist with 2.6.30-rc8 (so regression should be closed).

Done.

Thanks,
Rafael

[Bug #13179] CD-R: wodim intermittent failures

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13179
Subject		: CD-R: wodim intermittent failures
Submitter	: Andy Isaacson <adi-3HqRAUrWAWyGglJvpFV4uA@public.gmane.org>
Date		: 2009-04-21 1:52 (48 days old)
References	: http://marc.info/?l=linux-kernel&m=124027879214231&w=4

[Bug #13219] Since kernel 2.6.30-rc1, computers hangs randomly ..

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Since kernel 2.6.30-rc1, computers hangs randomly ..
Submitter	: David Hill <hilld-HTiBYHdybX7UkGsOFmftXw@public.gmane.org>
Date		: 2009-05-01 16:57 (38 days old)

[Bug #13277] 2.6.30 regression - unreliable resume - bisected - Thinkpad X40

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13277
Subject		: 2.6.30 regression - unreliable resume - bisected - Thinkpad X40
Submitter	: Daniel Vetter <daniel-/w4YWyX8dFk@public.gmane.org>
Date		: 2009-05-11 10:08 (28 days old)
Handled-By	: Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

[Bug #13318] AGP doesn't work anymore on nforce2

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime-Mmb7MZpHnFY@public.gmane.org>
Date		: 2009-04-30 8:51 (39 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

[Bug #13306] hibernate slow on _second_ run

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
Date		: 2009-05-14 09:34 (25 days old)

Re: [Bug #13306] hibernate slow on _second_ run

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 647 bytes --]

On Sun, 2009-06-07 at 11:52 +0200, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
> Subject		: hibernate slow on _second_ run
> Submitter	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
> Date		: 2009-05-14 09:34 (25 days old)

I'm still seeing this, did you get a chance to look at the ftrace?

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [Bug #13306] hibernate slow on _second_ run

[Rafael J. Wysocki]

On Monday 08 June 2009, Johannes Berg wrote:
> On Sun, 2009-06-07 at 11:52 +0200, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> > 
> > The following bug entry is on the current list of known regressions
> > from 2.6.29.  Please verify if it still should be listed and let me know
> > (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
> > Subject		: hibernate slow on _second_ run
> > Submitter	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
> > Date		: 2009-05-14 09:34 (25 days old)
> 
> I'm still seeing this, did you get a chance to look at the ftrace?

It's on my todo list, really close to the top.  Will do later today.

Best,
Rafael

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (40 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> Subject		: Page allocation failures with b43 and p54usb
> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date		: 2009-04-29 21:01 (40 days old)
> References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

This bug is extremely difficult to pin down. I cannot reproduce it at
will. The system has to be up for a long time, which is difficult with
testing the late RC's of 2.6.30 and the code in wireless-testing so
that new bugs don't end up in 2.6.31-RCX. That said, it still was in
2.6.30-RC6 and I'm not aware of any changes since that would fix it.

My operating kernel is patched with additional diagnostics to help me
understand why a kmalloc request for a buffer of 1390 bytes suddenly
ends up as an O(1) request. Unfortunately, I don't have any answers.

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi Larry,

On Sun, Jun 7, 2009 at 4:10 PM, Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org> wrote:
> Rafael J. Wysocki wrote:
>> This message has been generated automatically as a part of a report
>> of recent regressions.
>>
>> The following bug entry is on the current list of known regressions
>> from 2.6.29.  Please verify if it still should be listed and let me know
>> (either way).
>>
>>
>> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=13319
>> Subject               : Page allocation failures with b43 and p54usb
>> Submitter     : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
>> Date          : 2009-04-29 21:01 (40 days old)
>> References    : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
>> Handled-By    : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
>
> This bug is extremely difficult to pin down. I cannot reproduce it at
> will. The system has to be up for a long time, which is difficult with
> testing the late RC's of 2.6.30 and the code in wireless-testing so
> that new bugs don't end up in 2.6.31-RCX. That said, it still was in
> 2.6.30-RC6 and I'm not aware of any changes since that would fix it.
>
> My operating kernel is patched with additional diagnostics to help me
> understand why a kmalloc request for a buffer of 1390 bytes suddenly
> ends up as an O(1) request. Unfortunately, I don't have any answers.

Looking at the out-of-memory trace, there's still memory available but
the pskb_expand_head() allocation is GFP_ATOMIC so there's not much
the page allocator can do here. The amount of memory consumed by
inactive_file is pretty high so maybe the problem is related to the
recent mm/vmscan.c changes. Lets copy some more mm developers and see
if they can help out.

                        Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Rik van Riel]

Pekka Enberg wrote:
> Hi Larry,
> 
> On Sun, Jun 7, 2009 at 4:10 PM, Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org> wrote:
>> Rafael J. Wysocki wrote:
>>> This message has been generated automatically as a part of a report
>>> of recent regressions.
>>>
>>> The following bug entry is on the current list of known regressions
>>> from 2.6.29.  Please verify if it still should be listed and let me know
>>> (either way).
>>>
>>>
>>> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=13319
>>> Subject               : Page allocation failures with b43 and p54usb
>>> Submitter     : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
>>> Date          : 2009-04-29 21:01 (40 days old)
>>> References    : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
>>> Handled-By    : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
>> This bug is extremely difficult to pin down. I cannot reproduce it at
>> will. The system has to be up for a long time, which is difficult with
>> testing the late RC's of 2.6.30 and the code in wireless-testing so
>> that new bugs don't end up in 2.6.31-RCX. That said, it still was in
>> 2.6.30-RC6 and I'm not aware of any changes since that would fix it.
>>
>> My operating kernel is patched with additional diagnostics to help me
>> understand why a kmalloc request for a buffer of 1390 bytes suddenly
>> ends up as an O(1) request. Unfortunately, I don't have any answers.
> 
> Looking at the out-of-memory trace, there's still memory available but
> the pskb_expand_head() allocation is GFP_ATOMIC so there's not much
> the page allocator can do here. The amount of memory consumed by
> inactive_file is pretty high so maybe the problem is related to the
> recent mm/vmscan.c changes. Lets copy some more mm developers and see
> if they can help out.

That is a very strange trace.  The Mem-Info indicates
that the system has more than enough memory free, and
also enough memory in higher-order free blocks.

This would indicate a bug somewhere in the page
allocator - this memory should have been given to this
allocation request.

-- 
All rights reversed.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Sun, Jun 7, 2009 at 5:19 PM, Rik van Riel <riel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
> Pekka Enberg wrote:
>>
>> Hi Larry,
>>
>> On Sun, Jun 7, 2009 at 4:10 PM, Larry Finger <Larry.Finger@lwfinger.net>
>> wrote:
>>>
>>> Rafael J. Wysocki wrote:
>>>>
>>>> This message has been generated automatically as a part of a report
>>>> of recent regressions.
>>>>
>>>> The following bug entry is on the current list of known regressions
>>>> from 2.6.29.  Please verify if it still should be listed and let me know
>>>> (either way).
>>>>
>>>>
>>>> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=13319
>>>> Subject               : Page allocation failures with b43 and p54usb
>>>> Submitter     : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
>>>> Date          : 2009-04-29 21:01 (40 days old)
>>>> References    : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
>>>> Handled-By    : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
>>>
>>> This bug is extremely difficult to pin down. I cannot reproduce it at
>>> will. The system has to be up for a long time, which is difficult with
>>> testing the late RC's of 2.6.30 and the code in wireless-testing so
>>> that new bugs don't end up in 2.6.31-RCX. That said, it still was in
>>> 2.6.30-RC6 and I'm not aware of any changes since that would fix it.
>>>
>>> My operating kernel is patched with additional diagnostics to help me
>>> understand why a kmalloc request for a buffer of 1390 bytes suddenly
>>> ends up as an O(1) request. Unfortunately, I don't have any answers.
>>
>> Looking at the out-of-memory trace, there's still memory available but
>> the pskb_expand_head() allocation is GFP_ATOMIC so there's not much
>> the page allocator can do here. The amount of memory consumed by
>> inactive_file is pretty high so maybe the problem is related to the
>> recent mm/vmscan.c changes. Lets copy some more mm developers and see
>> if they can help out.
>
> That is a very strange trace.  The Mem-Info indicates
> that the system has more than enough memory free, and
> also enough memory in higher-order free blocks.
>
> This would indicate a bug somewhere in the page
> allocator - this memory should have been given to this
> allocation request.

Aha, I always have difficulties deciphering the traces. But lets
invite Mel to the party then!

                        Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Pekka Enberg wrote:
> On Sun, Jun 7, 2009 at 5:19 PM, Rik van Riel <riel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
>> That is a very strange trace.  The Mem-Info indicates
>> that the system has more than enough memory free, and
>> also enough memory in higher-order free blocks.
>>
>> This would indicate a bug somewhere in the page
>> allocator - this memory should have been given to this
>> allocation request.
> 
> Aha, I always have difficulties deciphering the traces. But lets
> invite Mel to the party then!

I'm happy to see some action on this problem. As usual, I'm happy to
test patches and/or provide diagnostic output.

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[KAMEZAWA Hiroyuki]

On Sun, 07 Jun 2009 11:35:27 -0500
Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org> wrote:

> Pekka Enberg wrote:
> > On Sun, Jun 7, 2009 at 5:19 PM, Rik van Riel <riel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
> >> That is a very strange trace.  The Mem-Info indicates
> >> that the system has more than enough memory free, and
> >> also enough memory in higher-order free blocks.
> >>
> >> This would indicate a bug somewhere in the page
> >> allocator - this memory should have been given to this
> >> allocation request.
> > 
> > Aha, I always have difficulties deciphering the traces. But lets
> > invite Mel to the party then!
> 
> I'm happy to see some action on this problem. As usual, I'm happy to
> test patches and/or provide diagnostic output.
> 
One question. 

Did your system fragmented in same way as to this
(see DMA32, 10052 of order-0 pages) in older kernel ? I think you can check
fragmentation status via /proc/buddyinfo.
=
kernel: Node 0 DMA: 3*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2100kB
kernel: Node 0 DMA32: 10062*4kB 1*8kB 1*16kB 0*32kB 1*64kB 1*128kB 0*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 40976kB
==

Thanks,
-Kame

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

KAMEZAWA Hiroyuki wrote:
> On Sun, 07 Jun 2009 11:35:27 -0500
> Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org> wrote:
> 
>> Pekka Enberg wrote:
>>> On Sun, Jun 7, 2009 at 5:19 PM, Rik van Riel <riel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
>>>> That is a very strange trace.  The Mem-Info indicates
>>>> that the system has more than enough memory free, and
>>>> also enough memory in higher-order free blocks.
>>>>
>>>> This would indicate a bug somewhere in the page
>>>> allocator - this memory should have been given to this
>>>> allocation request.
>>> Aha, I always have difficulties deciphering the traces. But lets
>>> invite Mel to the party then!
>> I'm happy to see some action on this problem. As usual, I'm happy to
>> test patches and/or provide diagnostic output.
>>
> One question. 
> 
> Did your system fragmented in same way as to this
> (see DMA32, 10052 of order-0 pages) in older kernel ? I think you can check
> fragmentation status via /proc/buddyinfo.
> =
> kernel: Node 0 DMA: 3*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
> 1*1024kB 0*2048kB 0*4096kB = 2100kB
> kernel: Node 0 DMA32: 10062*4kB 1*8kB 1*16kB 0*32kB 1*64kB 1*128kB 0*256kB
> 1*512kB 0*1024kB 0*2048kB 0*4096kB = 40976kB
> ==

The current system has not been up very long and does not show the
fragmentation:

finger@larrylap:~/wireless-testing> cat /proc/buddyinfo
Node 0, zone      DMA      4      5      4      2      4      1      2
     0      1      0      0
Node 0, zone    DMA32    261     78     46     55     61     54     37
    17     14     12    262

After I did a git pull and a kernel build with the sources on an
NFS-mounted volume, the fragmentation increased:

Node 0, zone      DMA      4      5      4      2      4      1      2
     0      1      0      0
Node 0, zone    DMA32   2213   1924   1292    705    285     81     25
     8      5      4    141

After a git pull and a kernel build on a second NFS-mounted tree:

Node 0, zone      DMA      4      5      4      2      4      1      2
     0      1      0      0
Node 0, zone    DMA32   3127   3058   1989    756    401    142     56
    14      5      3     12

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Mel Gorman]

On Sun, Jun 07, 2009 at 05:32:52PM +0300, Pekka Enberg wrote:
> On Sun, Jun 7, 2009 at 5:19 PM, Rik van Riel <riel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
> > Pekka Enberg wrote:
> >>
> >> Hi Larry,
> >>
> >> On Sun, Jun 7, 2009 at 4:10 PM, Larry Finger <Larry.Finger@lwfinger.net>
> >> wrote:
> >>>
> >>> Rafael J. Wysocki wrote:
> >>>>
> >>>> This message has been generated automatically as a part of a report
> >>>> of recent regressions.
> >>>>
> >>>> The following bug entry is on the current list of known regressions
> >>>> from 2.6.29.  Please verify if it still should be listed and let me know
> >>>> (either way).
> >>>>
> >>>>
> >>>> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=13319
> >>>> Subject               : Page allocation failures with b43 and p54usb
> >>>> Submitter     : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> >>>> Date          : 2009-04-29 21:01 (40 days old)
> >>>> References    : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> >>>> Handled-By    : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
> >>>
> >>> This bug is extremely difficult to pin down. I cannot reproduce it at
> >>> will. The system has to be up for a long time, which is difficult with
> >>> testing the late RC's of 2.6.30 and the code in wireless-testing so
> >>> that new bugs don't end up in 2.6.31-RCX. That said, it still was in
> >>> 2.6.30-RC6 and I'm not aware of any changes since that would fix it.
> >>>
> >>> My operating kernel is patched with additional diagnostics to help me
> >>> understand why a kmalloc request for a buffer of 1390 bytes suddenly
> >>> ends up as an O(1) request. Unfortunately, I don't have any answers.
> >>
> >> Looking at the out-of-memory trace, there's still memory available but
> >> the pskb_expand_head() allocation is GFP_ATOMIC so there's not much
> >> the page allocator can do here. The amount of memory consumed by
> >> inactive_file is pretty high so maybe the problem is related to the
> >> recent mm/vmscan.c changes. Lets copy some more mm developers and see
> >> if they can help out.
> >
> > That is a very strange trace.  The Mem-Info indicates
> > that the system has more than enough memory free, and
> > also enough memory in higher-order free blocks.
> >
> > This would indicate a bug somewhere in the page
> > allocator - this memory should have been given to this
> > allocation request.
> 
> Aha, I always have difficulties deciphering the traces. But lets
> invite Mel to the party then!
> 

Nothing like a party on Monday morning to get the week started!

What we appear to have is

o Allocation failure is high-order, high-priority, compound and atomic.
o swap is mostly unused, but we cannot enter direct reclaim.
o ZONE_DMA32 can be used
o The allocation path is in the slub allocator
o Are way above the order-0 watermarks so kswapd is probably not awake
o The minimum watermark for an order-0 page was about 647 pages in ZONE_DMA32
o The minimum watermark for an order-1 page was about 323 pages in ZONE_DMA32
o There are 10244 pages free at the time of the failure
o With the order-0 pages taken out for watermark calculation, there are
  182 free pages which is below the watermark of 323 pages for an
  order-1 allocation

While there is enough free memory overall, the zone watermark calculation
takes into account the order of the request. As this is an order-1 allocation,
the free order-0 pages are taken out of consideration and so the allocation
fails.

We've encountered this before and the conclusion was that the current
adjustments for watermark calculations of high-order allocations is right,
or at least there is no better alternative. In other words, the page
allocator in this instance is behaving as expected. Do we want to
revisit that discussion as to whether the watermark calculations for
high-order allocation should change? I think we'll reach the same
conclusion or at least decide that allowing the order-1 atomic
allocation to succeed here would just postpone the problem.

So the question is why are we doing a high-order atomic allocation in
this path? According to an earlier discussion on this problemn

> I think something happened to change the allocation as I never saw these
> O(1) failures before with these particular drivers. I put in a few test
> printk's and the buffers were 700-800 bytes long, and I would not expect
> them to require more than an O(0) allocation.

So, SLUB is deciding to use order-1 pages for the slab allocation.
Ordinarily, it'll get away with that because order-1 pages will be
allocated from a path that can direct reclaim. However, if a slab is
being used for atomic allocations, there is a chance that it's the
atomic request that allocates a new page for the slab.

Larry, can you post the contents of /proc/slabinfo so we can see
what size pages are being used for the kmalloc() buckets please?

Larry, you say the buffer is 700-800 bytes. Can you confirm that 800 bytes
is roughly the request size being made by ieee80211_skb_resize()?

Pekka, assuming the request size is 800 bytes, and SLUB is using order-1
pages for allocations of that size, what happened order-1 allocations
falling back to order-0 allocations as necessary. That logic exists,
right? If so, could it be broken?

-- 
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Mon, Jun 8, 2009 at 1:17 PM, Mel Gorman<mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> wrote:
> Pekka, assuming the request size is 800 bytes, and SLUB is using order-1
> pages for allocations of that size, what happened order-1 allocations
> falling back to order-0 allocations as necessary. That logic exists,
> right? If so, could it be broken?

That logic is in allocate_slab() and if the higher order allocation
fails, we fall-back to struct kmem_cache ->min order. That in turn is
set up in calculate_sizes() to get_order(size) so it seems pretty
unlikely to me the allocation is 800 bytes. Of course, I could be
missing something here and there's a bug in oo_make() or oo_order().
Hmm.

                        Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Mel Gorman]

On Mon, Jun 08, 2009 at 01:52:05PM +0300, Pekka Enberg wrote:
> On Mon, Jun 8, 2009 at 1:17 PM, Mel Gorman<mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> wrote:
> > Pekka, assuming the request size is 800 bytes, and SLUB is using order-1
> > pages for allocations of that size, what happened order-1 allocations
> > falling back to order-0 allocations as necessary. That logic exists,
> > right? If so, could it be broken?
> 
> That logic is in allocate_slab() and if the higher order allocation
> fails, we fall-back to struct kmem_cache ->min order. That in turn is
> set up in calculate_sizes() to get_order(size) so it seems pretty
> unlikely to me the allocation is 800 bytes. Of course, I could be
> missing something here and there's a bug in oo_make() or oo_order().
> Hmm.

Is there any chance you could hatchet together a patch
slab-allocation-failure that reports on slab allocation failures similar
to what the page allocator does? Minimally, it should tell us what
the size of the allocation was but any other information such as the
same of the slab, the size of pages it normally uses are, etc. would
also be useful.

-- 
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka J Enberg]

Hi Mel,

On Mon, 8 Jun 2009, Mel Gorman wrote:
> Is there any chance you could hatchet together a patch
> slab-allocation-failure that reports on slab allocation failures similar
> to what the page allocator does? Minimally, it should tell us what
> the size of the allocation was but any other information such as the
> same of the slab, the size of pages it normally uses are, etc. would
> also be useful.

Would something like this be sufficient? Figuring out the actual _size_ 
passed to kmalloc() is pretty difficult as then we would need to do the 
NULL test in fastpath code or pass the argument deeper in the call-chain.

			Pekka

diff --git a/mm/slub.c b/mm/slub.c
index 65ffda5..b5acf18 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1565,6 +1565,8 @@ new_slab:
 		c->page = new;
 		goto load_freelist;
 	}
+	printk(KERN_WARNING "SLUB: unable to satisfy allocation for cache %s (size=%d, node=%d, gfp=%x)\n",
+		s->name, s->size, node, gfpflags);
 	return NULL;
 debug:
 	if (!alloc_debug_processing(s, c->page, object, addr))

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Mel Gorman]

On Mon, Jun 08, 2009 at 04:58:10PM +0300, Pekka J Enberg wrote:
> Hi Mel,
> 
> On Mon, 8 Jun 2009, Mel Gorman wrote:
> > Is there any chance you could hatchet together a patch
> > slab-allocation-failure that reports on slab allocation failures similar
> > to what the page allocator does? Minimally, it should tell us what
> > the size of the allocation was but any other information such as the
> > same of the slab, the size of pages it normally uses are, etc. would
> > also be useful.
> 
> Would something like this be sufficient? Figuring out the actual _size_ 
> passed to kmalloc() is pretty difficult as then we would need to do the 
> NULL test in fastpath code or pass the argument deeper in the call-chain.
> 

It's much better than nothing. In the event of an allocation failure, we'll
know which kmalloc bucket it's coming out of so we'll have a limited range
of possible buffer sizes.

I have some suggestions on what we're outputting though.

> 			Pekka
> 
> diff --git a/mm/slub.c b/mm/slub.c
> index 65ffda5..b5acf18 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -1565,6 +1565,8 @@ new_slab:
>  		c->page = new;
>  		goto load_freelist;
>  	}
> +	printk(KERN_WARNING "SLUB: unable to satisfy allocation for cache %s (size=%d, node=%d, gfp=%x)\n",
> +		s->name, s->size, node, gfpflags);

size could be almost anything here for a casual reader. You are
outputting the size of the object plus its metadata so the name should
reflect that. I think it would be better to output objsize= and the
object size without the metadata overhead. What do you think?

In addition, include how many objects there are per-slab and include what
the order is being passed to the page allocator when allocating new slabs.
Would that be enough to determine if fallback-to-smaller orders occured?

>  	return NULL;
>  debug:
>  	if (!alloc_debug_processing(s, c->page, object, addr))
> 

-- 
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Mon, 8 Jun 2009, Mel Gorman wrote:

> In addition, include how many objects there are per-slab and include what
> the order is being passed to the page allocator when allocating new slabs.
> Would that be enough to determine if fallback-to-smaller orders occured?

There is a per slab counter ORDER_FALLBACK that is increased for
allocations that required fallback.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi Mel,

On Mon, 2009-06-08 at 15:12 +0100, Mel Gorman wrote:
> > diff --git a/mm/slub.c b/mm/slub.c
> > index 65ffda5..b5acf18 100644
> > --- a/mm/slub.c
> > +++ b/mm/slub.c
> > @@ -1565,6 +1565,8 @@ new_slab:
> >  		c->page = new;
> >  		goto load_freelist;
> >  	}
> > +	printk(KERN_WARNING "SLUB: unable to satisfy allocation for cache %s (size=%d, node=%d, gfp=%x)\n",
> > +		s->name, s->size, node, gfpflags);
> 
> size could be almost anything here for a casual reader. You are
> outputting the size of the object plus its metadata so the name should
> reflect that. I think it would be better to output objsize= and the
> object size without the metadata overhead. What do you think?
> 
> In addition, include how many objects there are per-slab and include what
> the order is being passed to the page allocator when allocating new slabs.
> Would that be enough to determine if fallback-to-smaller orders occured?

So how about something like this then?

			Pekka

diff --git a/mm/slub.c b/mm/slub.c
index 65ffda5..a03dbe8 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1484,6 +1484,58 @@ static inline int node_match(struct kmem_cache_cpu *c, int node)
 	return 1;
 }
 
+static int count_free(struct page *page)
+{
+	return page->objects - page->inuse;
+}
+
+static unsigned long count_partial(struct kmem_cache_node *n,
+					int (*get_count)(struct page *))
+{
+	unsigned long flags;
+	unsigned long x = 0;
+	struct page *page;
+
+	spin_lock_irqsave(&n->list_lock, flags);
+	list_for_each_entry(page, &n->partial, lru)
+		x += get_count(page);
+	spin_unlock_irqrestore(&n->list_lock, flags);
+	return x;
+}
+
+static noinline void
+slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid)
+{
+	int node;
+
+	printk(KERN_WARNING
+		"SLUB: Unable to allocate memory on node %d (gfp=%x)\n",
+		nid, gfpflags);
+	printk(KERN_WARNING "  cache: %s, object size: %d, buffer size: %d, "
+		"default order: %d, min order: %d\n", s->name, s->objsize,
+		s->size, oo_order(s->oo), oo_order(s->min));
+
+	for_each_online_node(node) {
+		struct kmem_cache_node *n = get_node(s, node);
+		unsigned long nr_partials;
+		unsigned long nr_slabs;
+		unsigned long nr_objs;
+		unsigned long nr_free;
+
+		if (!n)
+			continue;
+
+		nr_partials = n->nr_partial;
+		nr_slabs = atomic_long_read(&n->nr_slabs);
+		nr_objs = atomic_long_read(&n->total_objects);
+		nr_free = count_partial(n, count_free);
+
+		printk(KERN_WARNING
+			"  node %d: partials: %ld, slabs: %ld, objs: %ld, free: %ld\n",
+			node, nr_partials, nr_slabs, nr_objs, nr_free);
+	}
+}
+
 /*
  * Slow path. The lockless freelist is empty or we need to perform
  * debugging duties.
@@ -1565,6 +1617,7 @@ new_slab:
 		c->page = new;
 		goto load_freelist;
 	}
+	slab_out_of_memory(s, gfpflags, node);
 	return NULL;
 debug:
 	if (!alloc_debug_processing(s, c->page, object, addr))
@@ -3318,20 +3371,6 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
 }
 
 #ifdef CONFIG_SLUB_DEBUG
-static unsigned long count_partial(struct kmem_cache_node *n,
-					int (*get_count)(struct page *))
-{
-	unsigned long flags;
-	unsigned long x = 0;
-	struct page *page;
-
-	spin_lock_irqsave(&n->list_lock, flags);
-	list_for_each_entry(page, &n->partial, lru)
-		x += get_count(page);
-	spin_unlock_irqrestore(&n->list_lock, flags);
-	return x;
-}
-
 static int count_inuse(struct page *page)
 {
 	return page->inuse;
@@ -3342,11 +3381,6 @@ static int count_total(struct page *page)
 	return page->objects;
 }
 
-static int count_free(struct page *page)
-{
-	return page->objects - page->inuse;
-}
-
 static int validate_slab(struct kmem_cache *s, struct page *page,
 						unsigned long *map)
 {

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Tue, 9 Jun 2009, Pekka Enberg wrote:

> Hi Mel,
> 
> On Mon, 2009-06-08 at 15:12 +0100, Mel Gorman wrote:
> > > diff --git a/mm/slub.c b/mm/slub.c
> > > index 65ffda5..b5acf18 100644
> > > --- a/mm/slub.c
> > > +++ b/mm/slub.c
> > > @@ -1565,6 +1565,8 @@ new_slab:
> > >  		c->page = new;
> > >  		goto load_freelist;
> > >  	}
> > > +	printk(KERN_WARNING "SLUB: unable to satisfy allocation for cache %s (size=%d, node=%d, gfp=%x)\n",
> > > +		s->name, s->size, node, gfpflags);
> > 
> > size could be almost anything here for a casual reader. You are
> > outputting the size of the object plus its metadata so the name should
> > reflect that. I think it would be better to output objsize= and the
> > object size without the metadata overhead. What do you think?
> > 
> > In addition, include how many objects there are per-slab and include what
> > the order is being passed to the page allocator when allocating new slabs.
> > Would that be enough to determine if fallback-to-smaller orders occured?
> 
> So how about something like this then?
> 

Larry reported this stack trace:

kernel: git: page allocation failure. order:1, mode:0x4020
kernel: Pid: 3707, comm: git Not tainted 2.6.30-rc1-wl #115
kernel: Call Trace:
kernel:  [<ffffffff80292f84>] __alloc_pages_internal+0x43d/0x45d
kernel:  [<ffffffff802b2383>] alloc_pages_current+0xbe/0xc6
kernel:  [<ffffffff802b66a4>] new_slab+0xcf/0x28b

That's in the order fallback for new slab allocations; so this cache must 
have oo_order(s->min) of 1.

To diagnose whether its object size dictates a >0 slab order, you could 
enable CONFIG_SLUB_STATS (it's disabled in his .config) and check which 
/sys/kernel/slab/cache/order_fallback increased.  Once you have identified 
the cache, you can get this information via 
/sys/kernel/slab/cache/{objsize,order,size}.  I think this is what 
Christoph was getting at.

You could even boot with `slub_nomerge' to determine whether cache merging 
was the issue where the cache under consideration was unnecessarily merged 
with one that requires larger higher order minimums.

I don't quite understand how its necessary to print the partial lists for 
each node, they should be exhausted if we're allocating a new slab if the 
node doesn't matter (and can't in Larry's case, he only has one).

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi David,

On Tue, 2009-06-09 at 00:54 -0700, David Rientjes wrote:
> Larry reported this stack trace:
> 
> kernel: git: page allocation failure. order:1, mode:0x4020
> kernel: Pid: 3707, comm: git Not tainted 2.6.30-rc1-wl #115
> kernel: Call Trace:
> kernel:  [<ffffffff80292f84>] __alloc_pages_internal+0x43d/0x45d
> kernel:  [<ffffffff802b2383>] alloc_pages_current+0xbe/0xc6
> kernel:  [<ffffffff802b66a4>] new_slab+0xcf/0x28b
> 
> That's in the order fallback for new slab allocations; so this cache must 
> have oo_order(s->min) of 1.

Yes, agreed which is why I said it's unlikely that the allocated size is
800 bytes or so.

On Tue, 2009-06-09 at 00:54 -0700, David Rientjes wrote:
> To diagnose whether its object size dictates a >0 slab order, you could 
> enable CONFIG_SLUB_STATS (it's disabled in his .config) and check which 
> /sys/kernel/slab/cache/order_fallback increased.  Once you have identified 
> the cache, you can get this information via 
> /sys/kernel/slab/cache/{objsize,order,size}.  I think this is what 
> Christoph was getting at.
> 
> You could even boot with `slub_nomerge' to determine whether cache merging 
> was the issue where the cache under consideration was unnecessarily merged 
> with one that requires larger higher order minimums.

Sure. Applying my diagnostic patch will probably shed some light on the
subject too.

On Tue, 2009-06-09 at 00:54 -0700, David Rientjes wrote:
> I don't quite understand how its necessary to print the partial lists for 
> each node, they should be exhausted if we're allocating a new slab if the 
> node doesn't matter (and can't in Larry's case, he only has one).

It doesn't hurt either, does it? Yes, we expect the partial lists to be
exhausted but it's better to print that out just in case we have a bug
some day somewhere and that condition is not true. This is very
infrequent slow patch code here anyway.

			Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Tue, 9 Jun 2009, Pekka Enberg wrote:

> > To diagnose whether its object size dictates a >0 slab order, you could 
> > enable CONFIG_SLUB_STATS (it's disabled in his .config) and check which 
> > /sys/kernel/slab/cache/order_fallback increased.  Once you have identified 
> > the cache, you can get this information via 
> > /sys/kernel/slab/cache/{objsize,order,size}.  I think this is what 
> > Christoph was getting at.
> > 
> > You could even boot with `slub_nomerge' to determine whether cache merging 
> > was the issue where the cache under consideration was unnecessarily merged 
> > with one that requires larger higher order minimums.
> 
> Sure. Applying my diagnostic patch will probably shed some light on the
> subject too.
> 

I wasn't sure whether you were proposing the patch as an addition to slub 
or just to help with this issue.  I agree it would help in a hopefully 
ratelimited manner for general slab allocation failures and would have 
avoided some of the confusion for this issue from lack of diagnostics.

> > I don't quite understand how its necessary to print the partial lists for 
> > each node, they should be exhausted if we're allocating a new slab if the 
> > node doesn't matter (and can't in Larry's case, he only has one).
> 
> It doesn't hurt either, does it? Yes, we expect the partial lists to be
> exhausted but it's better to print that out just in case we have a bug
> some day somewhere and that condition is not true. This is very
> infrequent slow patch code here anyway.
> 

It will lead to false postiives since you can get a free to a full slab 
which moves it back to an allowed node's partial list before count_free() 
is printed.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi David,

On Tue, 2009-06-09 at 01:14 -0700, David Rientjes wrote:
> I wasn't sure whether you were proposing the patch as an addition to slub 
> or just to help with this issue.  I agree it would help in a hopefully 
> ratelimited manner for general slab allocation failures and would have 
> avoided some of the confusion for this issue from lack of diagnostics.

I am proposing it as a generic addition to SLUB.

On Tue, 2009-06-09 at 01:14 -0700, David Rientjes wrote:
> > It doesn't hurt either, does it? Yes, we expect the partial lists to be
> > exhausted but it's better to print that out just in case we have a bug
> > some day somewhere and that condition is not true. This is very
> > infrequent slow patch code here anyway.
> 
> It will lead to false postiives since you can get a free to a full slab 
> which moves it back to an allowed node's partial list before count_free() 
> is printed.

Fair enough, lets drop it then!

			Pekka

diff --git a/mm/slub.c b/mm/slub.c
index 65ffda5..2bbacfc 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1484,6 +1484,56 @@ static inline int node_match(struct kmem_cache_cpu *c, int node)
 	return 1;
 }
 
+static int count_free(struct page *page)
+{
+	return page->objects - page->inuse;
+}
+
+static unsigned long count_partial(struct kmem_cache_node *n,
+					int (*get_count)(struct page *))
+{
+	unsigned long flags;
+	unsigned long x = 0;
+	struct page *page;
+
+	spin_lock_irqsave(&n->list_lock, flags);
+	list_for_each_entry(page, &n->partial, lru)
+		x += get_count(page);
+	spin_unlock_irqrestore(&n->list_lock, flags);
+	return x;
+}
+
+static noinline void
+slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid)
+{
+	int node;
+
+	printk(KERN_WARNING
+		"SLUB: Unable to allocate memory on node %d (gfp=%x)\n",
+		nid, gfpflags);
+	printk(KERN_WARNING "  cache: %s, object size: %d, buffer size: %d, "
+		"default order: %d, min order: %d\n", s->name, s->objsize,
+		s->size, oo_order(s->oo), oo_order(s->min));
+
+	for_each_online_node(node) {
+		struct kmem_cache_node *n = get_node(s, node);
+		unsigned long nr_slabs;
+		unsigned long nr_objs;
+		unsigned long nr_free;
+
+		if (!n)
+			continue;
+
+		nr_slabs = atomic_long_read(&n->nr_slabs);
+		nr_objs = atomic_long_read(&n->total_objects);
+		nr_free = count_partial(n, count_free);
+
+		printk(KERN_WARNING
+			"  node %d: slabs: %ld, objs: %ld, free: %ld\n",
+			node, nr_slabs, nr_objs, nr_free);
+	}
+}
+
 /*
  * Slow path. The lockless freelist is empty or we need to perform
  * debugging duties.
@@ -1565,6 +1615,7 @@ new_slab:
 		c->page = new;
 		goto load_freelist;
 	}
+	slab_out_of_memory(s, gfpflags, node);
 	return NULL;
 debug:
 	if (!alloc_debug_processing(s, c->page, object, addr))
@@ -3318,20 +3369,6 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
 }
 
 #ifdef CONFIG_SLUB_DEBUG
-static unsigned long count_partial(struct kmem_cache_node *n,
-					int (*get_count)(struct page *))
-{
-	unsigned long flags;
-	unsigned long x = 0;
-	struct page *page;
-
-	spin_lock_irqsave(&n->list_lock, flags);
-	list_for_each_entry(page, &n->partial, lru)
-		x += get_count(page);
-	spin_unlock_irqrestore(&n->list_lock, flags);
-	return x;
-}
-
 static int count_inuse(struct page *page)
 {
 	return page->inuse;
@@ -3342,11 +3379,6 @@ static int count_total(struct page *page)
 	return page->objects;
 }
 
-static int count_free(struct page *page)
-{
-	return page->objects - page->inuse;
-}
-
 static int validate_slab(struct kmem_cache *s, struct page *page,
 						unsigned long *map)
 {

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Pekka Enberg wrote:
> 
> diff --git a/mm/slub.c b/mm/slub.c
> index 65ffda5..2bbacfc 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -1484,6 +1484,56 @@ static inline int node_match(struct kmem_cache_cpu *c, int node)
>  	return 1;
>  }
>  
> +static int count_free(struct page *page)
> +{
> +	return page->objects - page->inuse;
> +}
> +
> +static unsigned long count_partial(struct kmem_cache_node *n,
> +					int (*get_count)(struct page *))
> +{
> +	unsigned long flags;
> +	unsigned long x = 0;
> +	struct page *page;
> +
> +	spin_lock_irqsave(&n->list_lock, flags);
> +	list_for_each_entry(page, &n->partial, lru)
> +		x += get_count(page);
> +	spin_unlock_irqrestore(&n->list_lock, flags);
> +	return x;
> +}
> +
> +static noinline void
> +slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid)
> +{
> +	int node;
> +
> +	printk(KERN_WARNING
> +		"SLUB: Unable to allocate memory on node %d (gfp=%x)\n",
> +		nid, gfpflags);
> +	printk(KERN_WARNING "  cache: %s, object size: %d, buffer size: %d, "
> +		"default order: %d, min order: %d\n", s->name, s->objsize,
> +		s->size, oo_order(s->oo), oo_order(s->min));
> +
> +	for_each_online_node(node) {
> +		struct kmem_cache_node *n = get_node(s, node);
> +		unsigned long nr_slabs;
> +		unsigned long nr_objs;
> +		unsigned long nr_free;
> +
> +		if (!n)
> +			continue;
> +
> +		nr_slabs = atomic_long_read(&n->nr_slabs);
> +		nr_objs = atomic_long_read(&n->total_objects);
> +		nr_free = count_partial(n, count_free);
> +
> +		printk(KERN_WARNING
> +			"  node %d: slabs: %ld, objs: %ld, free: %ld\n",
> +			node, nr_slabs, nr_objs, nr_free);
> +	}
> +}
> +
>  /*
>   * Slow path. The lockless freelist is empty or we need to perform
>   * debugging duties.
> @@ -1565,6 +1615,7 @@ new_slab:
>  		c->page = new;
>  		goto load_freelist;
>  	}
> +	slab_out_of_memory(s, gfpflags, node);
>  	return NULL;
>  debug:
>  	if (!alloc_debug_processing(s, c->page, object, addr))
> @@ -3318,20 +3369,6 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
>  }
>  
>  #ifdef CONFIG_SLUB_DEBUG
> -static unsigned long count_partial(struct kmem_cache_node *n,
> -					int (*get_count)(struct page *))
> -{
> -	unsigned long flags;
> -	unsigned long x = 0;
> -	struct page *page;
> -
> -	spin_lock_irqsave(&n->list_lock, flags);
> -	list_for_each_entry(page, &n->partial, lru)
> -		x += get_count(page);
> -	spin_unlock_irqrestore(&n->list_lock, flags);
> -	return x;
> -}
> -
>  static int count_inuse(struct page *page)
>  {
>  	return page->inuse;
> @@ -3342,11 +3379,6 @@ static int count_total(struct page *page)
>  	return page->objects;
>  }
>  
> -static int count_free(struct page *page)
> -{
> -	return page->objects - page->inuse;
> -}
> -
>  static int validate_slab(struct kmem_cache *s, struct page *page,
>  						unsigned long *map)
>  {

With the above patch installed, I pushed my system hard enough to get
the O(1) allocation failures. This time they were triggered with a
'make -j8' on the kernel. No, I don't have that many CPUs, but I
figured that the extra make jobs might stress memory. My kernel is
2.6.30-rc8 from the wireless-testing tree. Everything matches Linus's
tree except drivers/net/wireless/, which contains what is essentially
2.6.31 code.

The dmesg output starting with the first allocation failure is:

cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291c0f>] ieee80211_master_start_xmit+0x298/0x319 [mac80211]
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffffa0291957>] ieee80211_subif_start_xmit+0x54b/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422332kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382252 pages shared
441407 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
phy0: failed to reallocate TX buffer
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422332kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382252 pages shared
441407 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422332kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382252 pages shared
441407 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422332kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382252 pages shared
441407 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422332kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382252 pages shared
441407 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422332kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382252 pages shared
441407 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422332kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382252 pages shared
441407 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422332kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382238 pages shared
441414 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355620 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422480kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382238 pages shared
441414 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b4038>] ? add_partial+0x1a/0x69
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  15
CPU    1: hi:  186, btch:  31 usd:  65
Active_anon:128724 active_file:123018 inactive_anon:47276
 inactive_file:355620 unevictable:8 dirty:18 writeback:0 unstable:0
 free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
active_anon:514896kB inactive_anon:189104kB active_file:492072kB
inactive_file:1422480kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
479694 total pagecache pages
969 pages in swap cache
Swap cache stats: add 4523, delete 3554, find 2913/3063
Free swap  = 2091884kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
382238 pages shared
441414 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
__ratelimit: 23 callbacks suppressed
rpciod/0: page allocation failure. order:1, mode:0x4020
Pid: 3085, comm: rpciod/0 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291815>] ieee80211_subif_start_xmit+0x409/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff8023fc6b>] ? local_bh_enable+0xc9/0xcf
 [<ffffffff80422e9d>] tcp_push_one+0x2f/0x31
 [<ffffffff80417439>] tcp_sendmsg+0x7a1/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff803e0f6e>] ? sock_sendmsg+0xdf/0xf8
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffff803e39b3>] sock_no_sendpage+0x9b/0xaa
 [<ffffffff804176de>] tcp_sendpage+0x48/0x5ec
 [<ffffffffa054c525>] xs_sendpages+0x12c/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bf9c3>] ? nfs3_xdr_writeargs+0x0/0x87 [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054faa1>] rpc_async_schedule+0x10/0x12 [sunrpc]
 [<ffffffff8024af33>] worker_thread+0x1fa/0x30a
 [<ffffffff8024aedc>] ? worker_thread+0x1a3/0x30a
 [<ffffffffa054fa91>] ? rpc_async_schedule+0x0/0x12 [sunrpc]
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff8024ad39>] ? worker_thread+0x0/0x30a
 [<ffffffff8024ad39>] ? worker_thread+0x0/0x30a
 [<ffffffff8024ec21>] kthread+0x56/0x83
 [<ffffffff8020cb7a>] child_rip+0xa/0x20
 [<ffffffff8020c57c>] ? restore_args+0x0/0x30
 [<ffffffff8024ebcb>] ? kthread+0x0/0x83
 [<ffffffff8020cb70>] ? child_rip+0x0/0x20
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd: 154
CPU    1: hi:  186, btch:  31 usd: 173
Active_anon:147694 active_file:116688 inactive_anon:47252
 inactive_file:344419 unevictable:8 dirty:5 writeback:0 unstable:0
 free:2692 slab:76878 mapped:19321 pagetables:4204 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:8664kB min:6904kB low:8628kB high:10356kB
active_anon:590776kB inactive_anon:189008kB active_file:466752kB
inactive_file:1377660kB unevictable:32kB present:2997292kB
pages_scanned:70 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 1898*4kB 12*8kB 8*16kB 1*32kB 0*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 8744kB
462221 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4555, delete 3589, find 2917/3067
Free swap  = 2091764kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
373616 pages shared
454599 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
cc1: page allocation failure. order:1, mode:0x4020
Pid: 8867, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291c0f>] ieee80211_master_start_xmit+0x298/0x319 [mac80211]
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffffa0291957>] ieee80211_subif_start_xmit+0x54b/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff803e33a8>] ? release_sock+0xcd/0xd6
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff80422e9d>] tcp_push_one+0x2f/0x31
 [<ffffffff80417439>] tcp_sendmsg+0x7a1/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff803e0f6e>] ? sock_sendmsg+0xdf/0xf8
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffff803e39b3>] sock_no_sendpage+0x9b/0xaa
 [<ffffffff804176de>] tcp_sendpage+0x48/0x5ec
 [<ffffffffa054c525>] xs_sendpages+0x12c/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bf9c3>] ? nfs3_xdr_writeargs+0x0/0x87 [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
kswapd0: page allocation failure. order:1, mode:0x4020
Pid: 229, comm: kswapd0 Not tainted 2.6.30-rc8-wl #164
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa05bb774>] nfs_write_rpcsetup+0x215/0x237 [nfs]
Call Trace:
 [<ffffffffa05bd257>] nfs_flush_one+0xa2/0xd9 [nfs]
 [<ffffffffa05b82d9>] nfs_pageio_doio+0x32/0x5b [nfs]
 [<ffffffffa05b83ec>] nfs_pageio_complete+0x9/0xb [nfs]
 [<ffffffffa05bbeae>] nfs_writepages+0x101/0x13a [nfs]
 [<ffffffffa05bd1b5>] ? nfs_flush_one+0x0/0xd9 [nfs]
 [<ffffffffa05bd043>] nfs_write_mapping+0x63/0x9e [nfs]
 [<ffffffffa05bd0a7>] nfs_wb_all+0x12/0x14 [nfs]
 [<ffffffffa05b0145>] nfs_file_flush+0x8a/0xb1 [nfs]
 [<ffffffff802bb18d>] filp_close+0x40/0x63
 [<ffffffff802bb255>] sys_close+0xa5/0xe4
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
 <IRQ> Node 0  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  85
Active_anon:151538 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606152kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB  [<ffffffff802b6362>] new_slab+0xcf/0x28b
5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB 1*1024kB 0*2048kB
0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB  [<ffffffff802b4d1f>] ?
unfreeze_slab+0x4c/0xbd
3*16kB 0*32kB 1*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB
0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa01aaee5>] ? ssb_pci_read32+0x46/0x54 [ssb]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff8023f988>] irq_exit+0x4e/0x88
 [<ffffffff8020de2d>] do_IRQ+0xac/0xc3
 [<ffffffff8020c4d3>] ret_from_intr+0x0/0xf
 <EOI>  [<ffffffff8046013e>] ? _spin_unlock_irq+0x2d/0x30
 [<ffffffff80296a35>] ? __remove_mapping+0xac/0xc6
 [<ffffffff802971b3>] ? shrink_page_list+0x558/0x69f
 [<ffffffff80296262>] ? isolate_pages_global+0x179/0x219
 [<ffffffff8046013c>] ? _spin_unlock_irq+0x2b/0x30
 [<ffffffff8025ce77>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff80297937>] ? shrink_list+0x2a1/0x5b6
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffff80297ed7>] ? shrink_zone+0x28b/0x335
 [<ffffffff8033a0d4>] ? __up_read+0x92/0x9a
 [<ffffffff802980c3>] ? shrink_slab+0x142/0x154
 [<ffffffff80298837>] ? kswapd+0x4b1/0x692
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff802960e9>] ? isolate_pages_global+0x0/0x219
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff8024ec21>] ? kthread+0x56/0x83
 [<ffffffff8020cb7a>] ? child_rip+0xa/0x20
 [<ffffffff8020c57c>] ? restore_args+0x0/0x30
 [<ffffffff8024ebcb>] ? kthread+0x0/0x83
 [<ffffffff8020cb70>] ? child_rip+0x0/0x20
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  85
Active_anon:151538 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606152kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
769872 pages RAM
769872 pages RAM
21377 pages reserved
371529 pages shared
456955 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
21377 pages reserved
  node 0: slabs: 96, objs: 672, free: 0
371529 pages shared
456955 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
phy0: failed to reallocate TX buffer
kswapd0: page allocation failure. order:1, mode:0x4020
Pid: 229, comm: kswapd0 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff8025ce5d>] ? trace_hardirqs_on_caller+0xf1/0x12f
 [<ffffffffa01aaee5>] ? ssb_pci_read32+0x46/0x54 [ssb]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff80243f1f>] ? run_timer_softirq+0x259/0x268
 [<ffffffff80243dfc>] ? run_timer_softirq+0x136/0x268
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff8023f988>] irq_exit+0x4e/0x88
 [<ffffffff8020de2d>] do_IRQ+0xac/0xc3
 [<ffffffff8020c4d3>] ret_from_intr+0x0/0xf
 <EOI>  [<ffffffff8046013e>] ? _spin_unlock_irq+0x2d/0x30
 [<ffffffff80296a35>] ? __remove_mapping+0xac/0xc6
 [<ffffffff802971b3>] ? shrink_page_list+0x558/0x69f
 [<ffffffff80296262>] ? isolate_pages_global+0x179/0x219
 [<ffffffff8046013c>] ? _spin_unlock_irq+0x2b/0x30
 [<ffffffff8025ce77>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff80297937>] ? shrink_list+0x2a1/0x5b6
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffff80297ed7>] ? shrink_zone+0x28b/0x335
 [<ffffffff8033a0d4>] ? __up_read+0x92/0x9a
 [<ffffffff802980c3>] ? shrink_slab+0x142/0x154
 [<ffffffff80298837>] ? kswapd+0x4b1/0x692
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff802960e9>] ? isolate_pages_global+0x0/0x219
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff8024ec21>] ? kthread+0x56/0x83
 [<ffffffff8020cb7a>] ? child_rip+0xa/0x20
 [<ffffffff8020c57c>] ? restore_args+0x0/0x30
 [<ffffffff8024ebcb>] ? kthread+0x0/0x83
 [<ffffffff8020cb70>] ? child_rip+0x0/0x20
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  84
Active_anon:151538 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606152kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
cc1: page allocation failure. order:1, mode:0x4020
Pid: 8867, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291c0f>] ieee80211_master_start_xmit+0x298/0x319 [mac80211]
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffffa0291957>] ieee80211_subif_start_xmit+0x54b/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff80422e9d>] tcp_push_one+0x2f/0x31
 [<ffffffff80417439>] tcp_sendmsg+0x7a1/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff803e0f6e>] ? sock_sendmsg+0xdf/0xf8
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffff803e39b3>] sock_no_sendpage+0x9b/0xaa
 [<ffffffff804176de>] tcp_sendpage+0x48/0x5ec
 [<ffffffffa054c525>] xs_sendpages+0x12c/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bf9c3>] ? nfs3_xdr_writeargs+0x0/0x87 [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa05bb774>] nfs_write_rpcsetup+0x215/0x237 [nfs]
 [<ffffffffa05bd257>] nfs_flush_one+0xa2/0xd9 [nfs]
 [<ffffffffa05b82d9>] nfs_pageio_doio+0x32/0x5b [nfs]
 [<ffffffffa05b83ec>] nfs_pageio_complete+0x9/0xb [nfs]
 [<ffffffffa05bbeae>] nfs_writepages+0x101/0x13a [nfs]
 [<ffffffffa05bd1b5>] ? nfs_flush_one+0x0/0xd9 [nfs]
 [<ffffffffa05bd043>] nfs_write_mapping+0x63/0x9e [nfs]
 [<ffffffffa05bd0a7>] nfs_wb_all+0x12/0x14 [nfs]
 [<ffffffffa05b0145>] nfs_file_flush+0x8a/0xb1 [nfs]
 [<ffffffff802bb18d>] filp_close+0x40/0x63
 [<ffffffff802bb255>] sys_close+0xa5/0xe4
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  51
Active_anon:151575 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606300kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
371534 pages shared
456983 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
kswapd0: page allocation failure. order:1, mode:0x4020
Pid: 229, comm: kswapd0 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa01aaee5>] ? ssb_pci_read32+0x46/0x54 [ssb]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff80243f1f>] ? run_timer_softirq+0x259/0x268
 [<ffffffff80243dfc>] ? run_timer_softirq+0x136/0x268
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff8023f988>] irq_exit+0x4e/0x88
 [<ffffffff8020de2d>] do_IRQ+0xac/0xc3
 [<ffffffff8020c4d3>] ret_from_intr+0x0/0xf
 <EOI>  [<ffffffff8046013e>] ? _spin_unlock_irq+0x2d/0x30
 [<ffffffff80296a35>] ? __remove_mapping+0xac/0xc6
 [<ffffffff802971b3>] ? shrink_page_list+0x558/0x69f
 [<ffffffff80296262>] ? isolate_pages_global+0x179/0x219
 [<ffffffff8046013c>] ? _spin_unlock_irq+0x2b/0x30
 [<ffffffff8025ce77>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff80297937>] ? shrink_list+0x2a1/0x5b6
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffff80297ed7>] ? shrink_zone+0x28b/0x335
 [<ffffffff8033a0d4>] ? __up_read+0x92/0x9a
 [<ffffffff802980c3>] ? shrink_slab+0x142/0x154
 [<ffffffff80298837>] ? kswapd+0x4b1/0x692
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff802960e9>] ? isolate_pages_global+0x0/0x219
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff8024ec21>] ? kthread+0x56/0x83
 [<ffffffff8020cb7a>] ? child_rip+0xa/0x20
 [<ffffffff8020c57c>] ? restore_args+0x0/0x30
 [<ffffffff8024ebcb>] ? kthread+0x0/0x83
 [<ffffffff8020cb70>] ? child_rip+0x0/0x20
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  51
Active_anon:151575 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606300kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
371535 pages shared
456983 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
cc1: page allocation failure. order:1, mode:0x4020
Pid: 8867, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291815>] ieee80211_subif_start_xmit+0x409/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b40a2>] ? get_partial_node+0x1b/0x8a
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff803e33a8>] ? release_sock+0xcd/0xd6
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e3497>] ? lock_sock_nested+0xe6/0xf5
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff803e11f7>] ? kernel_sendmsg+0x34/0x49
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c583>] xs_sendpages+0x18a/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bf9c3>] ? nfs3_xdr_writeargs+0x0/0x87 [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa05bb774>] nfs_write_rpcsetup+0x215/0x237 [nfs]
 [<ffffffffa05bd257>] nfs_flush_one+0xa2/0xd9 [nfs]
 [<ffffffffa05b82d9>] nfs_pageio_doio+0x32/0x5b [nfs]
 [<ffffffffa05b83ec>] nfs_pageio_complete+0x9/0xb [nfs]
 [<ffffffffa05bbeae>] nfs_writepages+0x101/0x13a [nfs]
 [<ffffffffa05bd1b5>] ? nfs_flush_one+0x0/0xd9 [nfs]
 [<ffffffffa05bd043>] nfs_write_mapping+0x63/0x9e [nfs]
 [<ffffffffa05bd0a7>] nfs_wb_all+0x12/0x14 [nfs]
 [<ffffffffa05b0145>] nfs_file_flush+0x8a/0xb1 [nfs]
 [<ffffffff802bb18d>] filp_close+0x40/0x63
 [<ffffffff802bb255>] sys_close+0xa5/0xe4
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  51
Active_anon:151575 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606300kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
371535 pages shared
456983 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
kswapd0: page allocation failure. order:1, mode:0x4020
Pid: 229, comm: kswapd0 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa01aaee5>] ? ssb_pci_read32+0x46/0x54 [ssb]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff80243f1f>] ? run_timer_softirq+0x259/0x268
 [<ffffffff80243dfc>] ? run_timer_softirq+0x136/0x268
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff8023f988>] irq_exit+0x4e/0x88
 [<ffffffff8020de2d>] do_IRQ+0xac/0xc3
 [<ffffffff8020c4d3>] ret_from_intr+0x0/0xf
 <EOI>  [<ffffffff8046013e>] ? _spin_unlock_irq+0x2d/0x30
 [<ffffffff80296a35>] ? __remove_mapping+0xac/0xc6
 [<ffffffff802971b3>] ? shrink_page_list+0x558/0x69f
 [<ffffffff80296262>] ? isolate_pages_global+0x179/0x219
 [<ffffffff8046013c>] ? _spin_unlock_irq+0x2b/0x30
 [<ffffffff8025ce77>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff80297937>] ? shrink_list+0x2a1/0x5b6
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffff80297ed7>] ? shrink_zone+0x28b/0x335
 [<ffffffff8033a0d4>] ? __up_read+0x92/0x9a
 [<ffffffff802980c3>] ? shrink_slab+0x142/0x154
 [<ffffffff80298837>] ? kswapd+0x4b1/0x692
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff802960e9>] ? isolate_pages_global+0x0/0x219
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff8024ec21>] ? kthread+0x56/0x83
 [<ffffffff8020cb7a>] ? child_rip+0xa/0x20
 [<ffffffff8020c57c>] ? restore_args+0x0/0x30
 [<ffffffff8024ebcb>] ? kthread+0x0/0x83
 [<ffffffff8020cb70>] ? child_rip+0x0/0x20
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  51
Active_anon:151575 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606300kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
371535 pages shared
456983 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
cc1: page allocation failure. order:1, mode:0x4020
Pid: 8867, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291815>] ieee80211_subif_start_xmit+0x409/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803ed179>] net_tx_action+0xd9/0x156
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff803efc0e>] ? dev_queue_xmit+0x352/0x384
 [<ffffffff8023fc57>] local_bh_enable+0xb5/0xcf
 [<ffffffff803efc0e>] dev_queue_xmit+0x352/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff802b40a2>] ? get_partial_node+0x1b/0x8a
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff803e33a8>] ? release_sock+0xcd/0xd6
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e3497>] ? lock_sock_nested+0xe6/0xf5
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff803e11f7>] ? kernel_sendmsg+0x34/0x49
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c583>] xs_sendpages+0x18a/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bf9c3>] ? nfs3_xdr_writeargs+0x0/0x87 [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa05bb774>] nfs_write_rpcsetup+0x215/0x237 [nfs]
 [<ffffffffa05bd257>] nfs_flush_one+0xa2/0xd9 [nfs]
 [<ffffffffa05b82d9>] nfs_pageio_doio+0x32/0x5b [nfs]
 [<ffffffffa05b83ec>] nfs_pageio_complete+0x9/0xb [nfs]
 [<ffffffffa05bbeae>] nfs_writepages+0x101/0x13a [nfs]
 [<ffffffffa05bd1b5>] ? nfs_flush_one+0x0/0xd9 [nfs]
 [<ffffffffa05bd043>] nfs_write_mapping+0x63/0x9e [nfs]
 [<ffffffffa05bd0a7>] nfs_wb_all+0x12/0x14 [nfs]
 [<ffffffffa05b0145>] nfs_file_flush+0x8a/0xb1 [nfs]
 [<ffffffff802bb18d>] filp_close+0x40/0x63
 [<ffffffff802bb255>] sys_close+0xa5/0xe4
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  51
Active_anon:151575 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606300kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
371535 pages shared
456983 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
kswapd0: page allocation failure. order:1, mode:0x4020
Pid: 229, comm: kswapd0 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 <IRQ>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff802b78f5>] __kmalloc_node_track_caller+0xbd/0x144
 [<ffffffffa02d131d>] ? setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffff803e872d>] __alloc_skb+0x6f/0x143
 [<ffffffffa02d131d>] setup_rx_descbuffer+0x4b/0x2d7 [b43]
 [<ffffffffa01aaee5>] ? ssb_pci_read32+0x46/0x54 [ssb]
 [<ffffffffa02d192e>] b43_dma_rx+0x319/0x4ff [b43]
 [<ffffffffa02c55d3>] b43_interrupt_tasklet+0x699/0x7fe [b43]
 [<ffffffff80243f1f>] ? run_timer_softirq+0x259/0x268
 [<ffffffff80243dfc>] ? run_timer_softirq+0x136/0x268
 [<ffffffff8023f684>] ? tasklet_action+0x44/0xdb
 [<ffffffff8023f6c0>] tasklet_action+0x80/0xdb
 [<ffffffff8023fdc7>] __do_softirq+0xb1/0x186
 [<ffffffff8020cc7c>] call_softirq+0x1c/0x28
 [<ffffffff8020e54d>] do_softirq+0x39/0x8a
 [<ffffffff8023f988>] irq_exit+0x4e/0x88
 [<ffffffff8020de2d>] do_IRQ+0xac/0xc3
 [<ffffffff8020c4d3>] ret_from_intr+0x0/0xf
 <EOI>  [<ffffffff8046013e>] ? _spin_unlock_irq+0x2d/0x30
 [<ffffffff80296a35>] ? __remove_mapping+0xac/0xc6
 [<ffffffff802971b3>] ? shrink_page_list+0x558/0x69f
 [<ffffffff80296262>] ? isolate_pages_global+0x179/0x219
 [<ffffffff8046013c>] ? _spin_unlock_irq+0x2b/0x30
 [<ffffffff8025ce77>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff80297937>] ? shrink_list+0x2a1/0x5b6
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffff80297ed7>] ? shrink_zone+0x28b/0x335
 [<ffffffff8033a0d4>] ? __up_read+0x92/0x9a
 [<ffffffff802980c3>] ? shrink_slab+0x142/0x154
 [<ffffffff80298837>] ? kswapd+0x4b1/0x692
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff802960e9>] ? isolate_pages_global+0x0/0x219
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff80298386>] ? kswapd+0x0/0x692
 [<ffffffff8024ec21>] ? kthread+0x56/0x83
 [<ffffffff8020cb7a>] ? child_rip+0xa/0x20
 [<ffffffff8020c57c>] ? restore_args+0x0/0x30
 [<ffffffff8024ebcb>] ? kthread+0x0/0x83
 [<ffffffff8020cb70>] ? child_rip+0x0/0x20
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  89
CPU    1: hi:  186, btch:  31 usd:  51
Active_anon:151575 active_file:114269 inactive_anon:47211
 inactive_file:340887 unevictable:8 dirty:36 writeback:0 unstable:2
 free:5246 slab:76536 mapped:19364 pagetables:4251 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:18880kB min:6904kB low:8628kB high:10356kB
active_anon:606300kB inactive_anon:188844kB active_file:457076kB
inactive_file:1363548kB unevictable:32kB present:2997292kB
pages_scanned:69 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 4459*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 18852kB
456290 total pagecache pages
966 pages in swap cache
Swap cache stats: add 4587, delete 3621, find 2934/3084
Free swap  = 2091636kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
371535 pages shared
456983 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
protocol 0008 is buggy, dev eth1
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
769872 pages RAM
21377 pages reserved
371535 pages shared
456983 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 96, objs: 672, free: 0
b43-phy0 debug: DMA RX: setup_rx_descbuffer() failed
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
phy0: failed to reallocate TX buffer
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
phy0: failed to reallocate TX buffer
__ratelimit: 73 callbacks suppressed
cc1: page allocation failure. order:1, mode:0x4020
Pid: 9042, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291815>] ieee80211_subif_start_xmit+0x409/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff802b40a2>] ? get_partial_node+0x1b/0x8a
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  13
CPU    1: hi:  186, btch:  31 usd: 173
Active_anon:163559 active_file:111927 inactive_anon:47119
 inactive_file:334673 unevictable:8 dirty:23 writeback:0 unstable:0
 free:2704 slab:75670 mapped:19336 pagetables:4281 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:8712kB min:6904kB low:8628kB high:10356kB
active_anon:654236kB inactive_anon:188476kB active_file:447708kB
inactive_file:1338692kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 1910*4kB 6*8kB 6*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 8744kB
447641 total pagecache pages
962 pages in swap cache
Swap cache stats: add 4651, delete 3689, find 2934/3084
Free swap  = 2091380kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
365043 pages shared
466540 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 97, objs: 679, free: 0
phy0: failed to reallocate TX buffer
cc1: page allocation failure. order:1, mode:0x4020
Pid: 10081, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291c0f>] ieee80211_master_start_xmit+0x298/0x319 [mac80211]
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffffa0291957>] ieee80211_subif_start_xmit+0x54b/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
 [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
 [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
 [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
 [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
 [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
 [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
 [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
 [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
 [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
 [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
 [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
 [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
 [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
 [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
 [<ffffffff802c6d1d>] path_walk+0x69/0xd4
 [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
 [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
 [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
 [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
 [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
 [<ffffffff802bb393>] sys_open+0x1b/0x1d
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  60
CPU    1: hi:  186, btch:  31 usd: 132
Active_anon:162603 active_file:111766 inactive_anon:47119
 inactive_file:332454 unevictable:8 dirty:11 writeback:0 unstable:0
 free:6493 slab:75317 mapped:19281 pagetables:4242 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:23868kB min:6904kB low:8628kB high:10356kB
active_anon:650412kB inactive_anon:188476kB active_file:447064kB
inactive_file:1329816kB unevictable:32kB present:2997292kB
pages_scanned:154 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 5688*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 23768kB
445272 total pagecache pages
946 pages in swap cache
Swap cache stats: add 4659, delete 3713, find 2934/3084
Free swap  = 2091348kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
357698 pages shared
466721 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 0
phy0: failed to reallocate TX buffer
cc1: page allocation failure. order:1, mode:0x4020
Pid: 10064, comm: cc1 Not tainted 2.6.30-rc8-wl #164
Call Trace:
 [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
 [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
 [<ffffffff802b6362>] new_slab+0xcf/0x28b
 [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
 [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
 [<ffffffff802b7e60>] __kmalloc+0x119/0x194
 [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
 [<ffffffff80460180>] ? _spin_unlock_irqrestore+0x3f/0x47
 [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
 [<ffffffffa0291815>] ieee80211_subif_start_xmit+0x409/0x56b [mac80211]
 [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
 [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
 [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
 [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
 [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
 [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
 [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
 [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
 [<ffffffff803e33a8>] ? release_sock+0xcd/0xd6
 [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
 [<ffffffff8040f093>] ip_local_out+0x20/0x24
 [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
 [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
 [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
 [<ffffffff80422e9d>] tcp_push_one+0x2f/0x31
 [<ffffffff80417439>] tcp_sendmsg+0x7a1/0x9fe
 [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
 [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff803e0f6e>] ? sock_sendmsg+0xdf/0xf8
 [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
 [<ffffffff803e39b3>] sock_no_sendpage+0x9b/0xaa
 [<ffffffff804176de>] tcp_sendpage+0x48/0x5ec
 [<ffffffffa054c525>] xs_sendpages+0x12c/0x1af [sunrpc]
 [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
 [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
 [<ffffffffa05bf9c3>] ? nfs3_xdr_writeargs+0x0/0x87 [nfs]
 [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
 [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
 [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
 [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
 [<ffffffffa05bb774>] nfs_write_rpcsetup+0x215/0x237 [nfs]
 [<ffffffffa05bd257>] nfs_flush_one+0xa2/0xd9 [nfs]
 [<ffffffffa05b82d9>] nfs_pageio_doio+0x32/0x5b [nfs]
 [<ffffffffa05b83ec>] nfs_pageio_complete+0x9/0xb [nfs]
 [<ffffffffa05bbeae>] nfs_writepages+0x101/0x13a [nfs]
 [<ffffffffa05bd1b5>] ? nfs_flush_one+0x0/0xd9 [nfs]
 [<ffffffffa05bd043>] nfs_write_mapping+0x63/0x9e [nfs]
 [<ffffffffa05bd0a7>] nfs_wb_all+0x12/0x14 [nfs]
 [<ffffffffa05b0145>] nfs_file_flush+0x8a/0xb1 [nfs]
 [<ffffffff802bb18d>] filp_close+0x40/0x63
 [<ffffffff802bb255>] sys_close+0xa5/0xe4
 [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:  42
CPU    1: hi:  186, btch:  31 usd: 207
Active_anon:165674 active_file:111453 inactive_anon:47087
 inactive_file:331621 unevictable:8 dirty:11 writeback:0 unstable:0
 free:4632 slab:75221 mapped:19318 pagetables:4242 bounce:0
Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
present:15220kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 2927 2927 2927
Node 0 DMA32 free:16424kB min:6904kB low:8628kB high:10356kB
active_anon:662696kB inactive_anon:188348kB active_file:445812kB
inactive_file:1326484kB unevictable:32kB present:2997292kB
pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
1*1024kB 0*2048kB 0*4096kB = 2104kB
Node 0 DMA32: 3831*4kB 1*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB
1*512kB 0*1024kB 0*2048kB 0*4096kB = 16340kB
444199 total pagecache pages
962 pages in swap cache
Swap cache stats: add 4683, delete 3721, find 2934/3084
Free swap  = 2091252kB
Total swap = 2104444kB
769872 pages RAM
21377 pages reserved
358924 pages shared
469842 pages non-shared
SLUB: Unable to allocate memory on node -1 (gfp=20)
  cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
order: 3, min order: 1
  node 0: slabs: 95, objs: 665, free: 2
phy0: failed to reallocate TX buffer

If you need the rest of the dmesg output, or anything else, please let
me know.

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Wed, 2009-06-10 at 09:41 -0500, Larry Finger wrote:
> With the above patch installed, I pushed my system hard enough to get
> the O(1) allocation failures. This time they were triggered with a
> 'make -j8' on the kernel. No, I don't have that many CPUs, but I
> figured that the extra make jobs might stress memory. My kernel is
> 2.6.30-rc8 from the wireless-testing tree. Everything matches Linus's
> tree except drivers/net/wireless/, which contains what is essentially
> 2.6.31 code.
> 
> The dmesg output starting with the first allocation failure is:
> 
> cc1: page allocation failure. order:1, mode:0x4020
> Pid: 6577, comm: cc1 Not tainted 2.6.30-rc8-wl #164
> Call Trace:
>  [<ffffffff80292a7b>] __alloc_pages_internal+0x43d/0x45e
>  [<ffffffff802b1f1f>] alloc_pages_current+0xbe/0xc6
>  [<ffffffff802b6362>] new_slab+0xcf/0x28b
>  [<ffffffff802b4d1f>] ? unfreeze_slab+0x4c/0xbd
>  [<ffffffff802b672e>] __slab_alloc+0x210/0x44c
>  [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
>  [<ffffffff803e7bee>] ? pskb_expand_head+0x52/0x166
>  [<ffffffff802b7e60>] __kmalloc+0x119/0x194
>  [<ffffffff803e7bee>] pskb_expand_head+0x52/0x166
>  [<ffffffffa02913d6>] ieee80211_skb_resize+0x91/0xc7 [mac80211]
>  [<ffffffffa0291c0f>] ieee80211_master_start_xmit+0x298/0x319 [mac80211]
>  [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
>  [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
>  [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
>  [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
>  [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
>  [<ffffffffa0291957>] ieee80211_subif_start_xmit+0x54b/0x56b [mac80211]
>  [<ffffffffa029162b>] ? ieee80211_subif_start_xmit+0x21f/0x56b [mac80211]
>  [<ffffffff8025cea8>] ? trace_hardirqs_on+0xd/0xf
>  [<ffffffff803e7790>] ? __kfree_skb+0x82/0x86
>  [<ffffffff803ef72a>] dev_hard_start_xmit+0x229/0x2a8
>  [<ffffffff803ef55c>] ? dev_hard_start_xmit+0x5b/0x2a8
>  [<ffffffff804005ee>] __qdisc_run+0xed/0x1fe
>  [<ffffffff803efb08>] dev_queue_xmit+0x24c/0x384
>  [<ffffffff803efa2f>] ? dev_queue_xmit+0x173/0x384
>  [<ffffffff8040fec9>] ip_finish_output+0x217/0x25c
>  [<ffffffff802b4038>] ? add_partial+0x1a/0x69
>  [<ffffffff8040ffaa>] ip_output+0x9c/0xa1
>  [<ffffffff8040f093>] ip_local_out+0x20/0x24
>  [<ffffffff8040f900>] ip_queue_xmit+0x2e0/0x337
>  [<ffffffff8042087e>] tcp_transmit_skb+0x5f7/0x63a
>  [<ffffffff802b790b>] ? __kmalloc_node_track_caller+0xd3/0x144
>  [<ffffffff80422d89>] tcp_write_xmit+0x83f/0x924
>  [<ffffffff803e872d>] ? __alloc_skb+0x6f/0x143
>  [<ffffffff80422ec9>] __tcp_push_pending_frames+0x2a/0x81
>  [<ffffffff80417590>] tcp_sendmsg+0x8f8/0x9fe
>  [<ffffffff803e0f6e>] sock_sendmsg+0xdf/0xf8
>  [<ffffffff8024efec>] ? autoremove_wake_function+0x0/0x38
>  [<ffffffff8023695c>] ? finish_task_switch+0x3b/0xdc
>  [<ffffffff803e11f7>] kernel_sendmsg+0x34/0x49
>  [<ffffffffa054c3f0>] xs_send_kvec+0x7a/0x83 [sunrpc]
>  [<ffffffffa054c486>] xs_sendpages+0x8d/0x1af [sunrpc]
>  [<ffffffffa054c6b1>] xs_tcp_send_request+0x52/0x149 [sunrpc]
>  [<ffffffffa054b470>] xprt_transmit+0x178/0x234 [sunrpc]
>  [<ffffffffa05bfc11>] ? nfs3_xdr_fhandle+0x0/0x2e [nfs]
>  [<ffffffffa0548d02>] call_transmit+0x20e/0x250 [sunrpc]
>  [<ffffffffa054f8a7>] __rpc_execute+0x86/0x244 [sunrpc]
>  [<ffffffffa054fa8d>] rpc_execute+0x28/0x2c [sunrpc]
>  [<ffffffffa054963c>] rpc_run_task+0x56/0x5e [sunrpc]
>  [<ffffffffa054972f>] rpc_call_sync+0x3f/0x5d [sunrpc]
>  [<ffffffffa05bdcd0>] nfs3_rpc_wrapper+0x22/0x5c [nfs]
>  [<ffffffffa05be40c>] nfs3_proc_getattr+0x5b/0x81 [nfs]
>  [<ffffffffa05b1e22>] __nfs_revalidate_inode+0xbd/0x1c9 [nfs]
>  [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
>  [<ffffffffa05d0529>] ? nfs_have_delegation+0x79/0x82 [nfs]
>  [<ffffffffa05d04b0>] ? nfs_have_delegation+0x0/0x82 [nfs]
>  [<ffffffffa05acb60>] nfs_lookup_revalidate+0x265/0x49c [nfs]
>  [<ffffffff802ccfa9>] ? __d_lookup+0xba/0x16a
>  [<ffffffff802cd047>] ? __d_lookup+0x158/0x16a
>  [<ffffffff802cceef>] ? __d_lookup+0x0/0x16a
>  [<ffffffffa0550992>] ? rpcauth_lookupcred+0x77/0x9f [sunrpc]
>  [<ffffffff802c49c6>] do_lookup+0x166/0x1bb
>  [<ffffffff802c66b7>] __link_path_walk+0x8f8/0xd58
>  [<ffffffff802c6d1d>] path_walk+0x69/0xd4
>  [<ffffffff802c6fb6>] do_path_lookup+0x187/0x1df
>  [<ffffffff802bdf80>] ? get_empty_filp+0xe9/0x14e
>  [<ffffffff802c7c4b>] do_filp_open+0x105/0x909
>  [<ffffffff802d0bb6>] ? alloc_fd+0x11d/0x12e
>  [<ffffffff802bb2ea>] do_sys_open+0x56/0xd6
>  [<ffffffff802bb393>] sys_open+0x1b/0x1d
>  [<ffffffff8020baab>] system_call_fastpath+0x16/0x1b
> Mem-Info:
> Node 0 DMA per-cpu:
> CPU    0: hi:    0, btch:   1 usd:   0
> CPU    1: hi:    0, btch:   1 usd:   0
> Node 0 DMA32 per-cpu:
> CPU    0: hi:  186, btch:  31 usd:  15
> CPU    1: hi:  186, btch:  31 usd:  65
> Active_anon:128724 active_file:123018 inactive_anon:47276
>  inactive_file:355583 unevictable:8 dirty:18 writeback:0 unstable:0
>  free:3621 slab:77881 mapped:18629 pagetables:4056 bounce:0
> Node 0 DMA free:2104kB min:32kB low:40kB high:48kB active_anon:0kB
> inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB
> present:15220kB pages_scanned:0 all_unreclaimable? yes
> lowmem_reserve[]: 0 2927 2927 2927
> Node 0 DMA32 free:12380kB min:6904kB low:8628kB high:10356kB
> active_anon:514896kB inactive_anon:189104kB active_file:492072kB
> inactive_file:1422332kB unevictable:32kB present:2997292kB
> pages_scanned:0 all_unreclaimable? no
> lowmem_reserve[]: 0 0 0 0
> Node 0 DMA: 4*4kB 3*8kB 5*16kB 2*32kB 4*64kB 1*128kB 2*256kB 0*512kB
> 1*1024kB 0*2048kB 0*4096kB = 2104kB
> Node 0 DMA32: 2821*4kB 1*8kB 3*16kB 1*32kB 1*64kB 1*128kB 1*256kB
> 1*512kB 0*1024kB 0*2048kB 0*4096kB = 12332kB
> 479694 total pagecache pages
> 969 pages in swap cache
> Swap cache stats: add 4523, delete 3554, find 2913/3063
> Free swap  = 2091884kB
> Total swap = 2104444kB
> 769872 pages RAM
> 21377 pages reserved
> 382252 pages shared
> 441407 pages non-shared
> SLUB: Unable to allocate memory on node -1 (gfp=20)
>   cache: kmalloc-4096, object size: 4096, buffer size: 4168, default
> order: 3, min order: 1
>   node 0: slabs: 95, objs: 665, free: 0
> phy0: failed to reallocate TX buffer

Aha, SLUB thinks the minimum order for 4096 is 1. I guess you have
CONFIG_SLUB_DEBUG enabled? If yes, something like to following should
help. Christoph, are you okay with this patch?

			Pekka

diff --git a/mm/slub.c b/mm/slub.c
index 65ffda5..2c93c30 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2334,6 +2334,8 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
 
 }
 
+#define MAX_DEBUG_SIZE (3 * sizeof(void *) + 2 * sizeof(struct track))
+
 static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 		const char *name, size_t size,
 		size_t align, unsigned long flags,
@@ -2346,6 +2348,9 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 	s->align = align;
 	s->flags = kmem_cache_flags(size, flags, name, ctor);
 
+	if ((size + MAX_DEBUG_SIZE) >= PAGE_SIZE)
+		flags &= ~(SLAB_POISON|SLAB_RED_ZONE|SLAB_STORE_USER);
+
 	if (!calculate_sizes(s, -1))
 		goto error;
 

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Wed, 2009-06-10 at 18:44 +0300, Pekka Enberg wrote:

> Aha, SLUB thinks the minimum order for 4096 is 1. I guess you have
> CONFIG_SLUB_DEBUG enabled? If yes, something like to following should
> help. Christoph, are you okay with this patch?
> 
> 			Pekka
> 
> diff --git a/mm/slub.c b/mm/slub.c
> index 65ffda5..2c93c30 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -2334,6 +2334,8 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
>  
>  }
>  
> +#define MAX_DEBUG_SIZE (3 * sizeof(void *) + 2 * sizeof(struct track))
> +
>  static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
>  		const char *name, size_t size,
>  		size_t align, unsigned long flags,
> @@ -2346,6 +2348,9 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
>  	s->align = align;
>  	s->flags = kmem_cache_flags(size, flags, name, ctor);
>  
> +	if ((size + MAX_DEBUG_SIZE) >= PAGE_SIZE)
> +		flags &= ~(SLAB_POISON|SLAB_RED_ZONE|SLAB_STORE_USER);
> +
>  	if (!calculate_sizes(s, -1))
>  		goto error;
>  
> 
Argh, that patch has a typo. Please try this one instead.

			Pekka

diff --git a/mm/slub.c b/mm/slub.c
index 65ffda5..cb0473c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2334,6 +2334,8 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
 
 }
 
+#define MAX_DEBUG_SIZE (3 * sizeof(void *) + 2 * sizeof(struct track))
+
 static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 		const char *name, size_t size,
 		size_t align, unsigned long flags,
@@ -2346,6 +2348,9 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 	s->align = align;
 	s->flags = kmem_cache_flags(size, flags, name, ctor);
 
+	if ((size + MAX_DEBUG_SIZE) >= PAGE_SIZE)
+		s->flags &= ~(SLAB_POISON|SLAB_RED_ZONE|SLAB_STORE_USER);
+
 	if (!calculate_sizes(s, -1))
 		goto error;
 

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 591 bytes --]

On Wed, 2009-06-10 at 18:49 +0300, Pekka Enberg wrote:
> On Wed, 2009-06-10 at 18:44 +0300, Pekka Enberg wrote:
> 
> > Aha, SLUB thinks the minimum order for 4096 is 1. I guess you have
> > CONFIG_SLUB_DEBUG enabled? If yes, something like to following should
> > help. Christoph, are you okay with this patch?


> +	if ((size + MAX_DEBUG_SIZE) >= PAGE_SIZE)

&& size <= PAGE_SIZE

? Or is this a path that only happens for small allocations?

> +		s->flags &= ~(SLAB_POISON|SLAB_RED_ZONE|SLAB_STORE_USER);
> +
>  	if (!calculate_sizes(s, -1))
>  		goto error;

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Wed, 2009-06-10 at 17:52 +0200, Johannes Berg wrote:
> On Wed, 2009-06-10 at 18:49 +0300, Pekka Enberg wrote:
> > On Wed, 2009-06-10 at 18:44 +0300, Pekka Enberg wrote:
> > 
> > > Aha, SLUB thinks the minimum order for 4096 is 1. I guess you have
> > > CONFIG_SLUB_DEBUG enabled? If yes, something like to following should
> > > help. Christoph, are you okay with this patch?
> 
> 
> > +	if ((size + MAX_DEBUG_SIZE) >= PAGE_SIZE)
> 
> && size <= PAGE_SIZE
> 
> ? Or is this a path that only happens for small allocations?

Anything that's beyond PAGE_SIZE * 2 is passed straight to the page
allocator and the intent of this patch is to disable debugging for all
big caches like SLAB does.

			Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Wed, 2009-06-10 at 18:49 +0300, Pekka Enberg wrote:
> > On Wed, 2009-06-10 at 18:44 +0300, Pekka Enberg wrote:
> > 
> > > Aha, SLUB thinks the minimum order for 4096 is 1. I guess you have
> > > CONFIG_SLUB_DEBUG enabled? If yes, something like to following should
> > > help. Christoph, are you okay with this patch?

On Wed, 2009-06-10 at 17:52 +0200, Johannes Berg wrote:
> > +	if ((size + MAX_DEBUG_SIZE) >= PAGE_SIZE)
> 
> && size <= PAGE_SIZE
> 
> ? Or is this a path that only happens for small allocations?
> 
> > +		s->flags &= ~(SLAB_POISON|SLAB_RED_ZONE|SLAB_STORE_USER);
> > +
> >  	if (!calculate_sizes(s, -1))
> >  		goto error;

Although something like this would probably be even nicer.

			Pekka

diff --git a/mm/slub.c b/mm/slub.c
index 65ffda5..a4206ef 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2334,6 +2334,16 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
 
 }
 
+#define MAX_DEBUG_SIZE (3 * sizeof(void *) + 2 * sizeof(struct track))
+
+static bool must_disable_debug(size_t size)
+{
+	/*
+	 * Disable debugging if it increases the minimum page order.
+	 */
+	return get_order(size + MAX_DEBUG_SIZE) > get_order(size);
+}
+
 static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 		const char *name, size_t size,
 		size_t align, unsigned long flags,
@@ -2346,6 +2356,9 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 	s->align = align;
 	s->flags = kmem_cache_flags(size, flags, name, ctor);
 
+	if (must_disable_debug(size))
+		s->flags &= ~(SLAB_POISON|SLAB_RED_ZONE|SLAB_STORE_USER);
+
 	if (!calculate_sizes(s, -1))
 		goto error;
 

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Pekka Enberg wrote:

> Argh, that patch has a typo. Please try this one instead.
> 
> 			Pekka

I installed this patch on top of the other one and have started
testing. It usually takes almost a day for it to occur.

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Wed, 10 Jun 2009, Pekka Enberg wrote:

> Aha, SLUB thinks the minimum order for 4096 is 1. I guess you have
> CONFIG_SLUB_DEBUG enabled? If yes, something like to following should
> help. Christoph, are you okay with this patch?

He likely has CONFIG_SLUB_DEBUG_ON set which enables debugging and thus
needs more than the payload for metadata.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Wed, 10 Jun 2009, Pekka Enberg wrote:
> > Aha, SLUB thinks the minimum order for 4096 is 1. I guess you have
> > CONFIG_SLUB_DEBUG enabled? If yes, something like to following should
> > help. Christoph, are you okay with this patch?

On Thu, 2009-06-11 at 10:41 -0400, Christoph Lameter wrote:
> He likely has CONFIG_SLUB_DEBUG_ON set which enables debugging and thus
> needs more than the payload for metadata.

Yup. I suspect a lot of people who are doing _testing_ enable that. If
you're unhappy with my patch (the get_order one which shouldn't affect
that many caches anyway), any suggestions how to fix this up? It seems
that the wireless stack at least does quite a few kmalloc(4096)
allocations.

We can probably switch back to page allocator pass-through in the near
future (when Mel's patches are in) but we need a fix for -stable.

			Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 892 bytes --]

On Thu, 2009-06-11 at 18:09 +0300, Pekka Enberg wrote:
> On Wed, 10 Jun 2009, Pekka Enberg wrote:
> > > Aha, SLUB thinks the minimum order for 4096 is 1. I guess you have
> > > CONFIG_SLUB_DEBUG enabled? If yes, something like to following should
> > > help. Christoph, are you okay with this patch?
> 
> On Thu, 2009-06-11 at 10:41 -0400, Christoph Lameter wrote:
> > He likely has CONFIG_SLUB_DEBUG_ON set which enables debugging and thus
> > needs more than the payload for metadata.
> 
> Yup. I suspect a lot of people who are doing _testing_ enable that. If
> you're unhappy with my patch (the get_order one which shouldn't affect
> that many caches anyway), any suggestions how to fix this up? It seems
> that the wireless stack at least does quite a few kmalloc(4096)
> allocations.

I think networking rounds up allocations, but it's not wireless per se.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Mel Gorman]

On Tue, Jun 09, 2009 at 10:06:41AM +0300, Pekka Enberg wrote:
> Hi Mel,
> 
> On Mon, 2009-06-08 at 15:12 +0100, Mel Gorman wrote:
> > > diff --git a/mm/slub.c b/mm/slub.c
> > > index 65ffda5..b5acf18 100644
> > > --- a/mm/slub.c
> > > +++ b/mm/slub.c
> > > @@ -1565,6 +1565,8 @@ new_slab:
> > >  		c->page = new;
> > >  		goto load_freelist;
> > >  	}
> > > +	printk(KERN_WARNING "SLUB: unable to satisfy allocation for cache %s (size=%d, node=%d, gfp=%x)\n",
> > > +		s->name, s->size, node, gfpflags);
> > 
> > size could be almost anything here for a casual reader. You are
> > outputting the size of the object plus its metadata so the name should
> > reflect that. I think it would be better to output objsize= and the
> > object size without the metadata overhead. What do you think?
> > 
> > In addition, include how many objects there are per-slab and include what
> > the order is being passed to the page allocator when allocating new slabs.
> > Would that be enough to determine if fallback-to-smaller orders occured?
> 
> So how about something like this then?
> 
> 			Pekka
> 
> diff --git a/mm/slub.c b/mm/slub.c
> index 65ffda5..a03dbe8 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -1484,6 +1484,58 @@ static inline int node_match(struct kmem_cache_cpu *c, int node)
>  	return 1;
>  }
>  
> +static int count_free(struct page *page)
> +{
> +	return page->objects - page->inuse;
> +}
> +
> +static unsigned long count_partial(struct kmem_cache_node *n,
> +					int (*get_count)(struct page *))
> +{
> +	unsigned long flags;
> +	unsigned long x = 0;
> +	struct page *page;
> +
> +	spin_lock_irqsave(&n->list_lock, flags);
> +	list_for_each_entry(page, &n->partial, lru)
> +		x += get_count(page);
> +	spin_unlock_irqrestore(&n->list_lock, flags);
> +	return x;
> +}
> +
> +static noinline void
> +slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid)
> +{
> +	int node;
> +
> +	printk(KERN_WARNING
> +		"SLUB: Unable to allocate memory on node %d (gfp=%x)\n",
> +		nid, gfpflags);
> +	printk(KERN_WARNING "  cache: %s, object size: %d, buffer size: %d, "
> +		"default order: %d, min order: %d\n", s->name, s->objsize,
> +		s->size, oo_order(s->oo), oo_order(s->min));
> +

Much nicer. There is a clear division between the object size and the
size including the metadata. There is also now a good idea of what sort
of request it was, we know what cache it was so we can guess the size
passed to kmalloc() with reasonable accuracy.

> +	for_each_online_node(node) {
> +		struct kmem_cache_node *n = get_node(s, node);
> +		unsigned long nr_partials;
> +		unsigned long nr_slabs;
> +		unsigned long nr_objs;
> +		unsigned long nr_free;
> +
> +		if (!n)
> +			continue;
> +
> +		nr_partials = n->nr_partial;
> +		nr_slabs = atomic_long_read(&n->nr_slabs);
> +		nr_objs = atomic_long_read(&n->total_objects);
> +		nr_free = count_partial(n, count_free);
> +
> +		printk(KERN_WARNING
> +			"  node %d: partials: %ld, slabs: %ld, objs: %ld, free: %ld\n",
> +			node, nr_partials, nr_slabs, nr_objs, nr_free);
> +	}
> +}

That looks like it would generate easier-to-debug-with messages and to
not-expert-at-slub eye, it looks correct. Slap a changelog on it with an
example message and go with it.  It should make page allocation failures
messages that go through SLUB a lot easier to figure out.

Thanks

> +
>  /*
>   * Slow path. The lockless freelist is empty or we need to perform
>   * debugging duties.
> @@ -1565,6 +1617,7 @@ new_slab:
>  		c->page = new;
>  		goto load_freelist;
>  	}
> +	slab_out_of_memory(s, gfpflags, node);
>  	return NULL;
>  debug:
>  	if (!alloc_debug_processing(s, c->page, object, addr))
> @@ -3318,20 +3371,6 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
>  }
>  
>  #ifdef CONFIG_SLUB_DEBUG
> -static unsigned long count_partial(struct kmem_cache_node *n,
> -					int (*get_count)(struct page *))
> -{
> -	unsigned long flags;
> -	unsigned long x = 0;
> -	struct page *page;
> -
> -	spin_lock_irqsave(&n->list_lock, flags);
> -	list_for_each_entry(page, &n->partial, lru)
> -		x += get_count(page);
> -	spin_unlock_irqrestore(&n->list_lock, flags);
> -	return x;
> -}
> -
>  static int count_inuse(struct page *page)
>  {
>  	return page->inuse;
> @@ -3342,11 +3381,6 @@ static int count_total(struct page *page)
>  	return page->objects;
>  }
>  
> -static int count_free(struct page *page)
> -{
> -	return page->objects - page->inuse;
> -}
> -
>  static int validate_slab(struct kmem_cache *s, struct page *page,
>  						unsigned long *map)
>  {
> 
> 

-- 
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Wed, Jun 10, 2009 at 6:56 PM, Mel Gorman<mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> wrote:
> That looks like it would generate easier-to-debug-with messages and to
> not-expert-at-slub eye, it looks correct. Slap a changelog on it with an
> example message and go with it.  It should make page allocation failures
> messages that go through SLUB a lot easier to figure out.

Thanks Mel! The patch is here and will be part of next slab pull
request to Linus:

http://git.kernel.org/?p=linux/kernel/git/penberg/slab-2.6.git;a=commitdiff;h=4bc6e7858da5ea4ecc3e47538f7fabed331cc21b

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Mon, Jun 8, 2009 at 5:12 PM, Mel Gorman<mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org> wrote:
> In addition, include how many objects there are per-slab and include what
> the order is being passed to the page allocator when allocating new slabs.
> Would that be enough to determine if fallback-to-smaller orders occured?

Well, if the slab_out_of_memory() is called, we already know the
higher order allocation failed _and_ the fallback allocation failed.
So yes, it would be enough.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Rik van Riel]

Mel Gorman wrote:

> We've encountered this before and the conclusion was that the current
> adjustments for watermark calculations of high-order allocations is right,
> or at least there is no better alternative. In other words, the page
> allocator in this instance is behaving as expected. Do we want to
> revisit that discussion as to whether the watermark calculations for
> high-order allocation should change? I think we'll reach the same
> conclusion or at least decide that allowing the order-1 atomic
> allocation to succeed here would just postpone the problem.

It would not just postpone the problem, it would also
bring the system closer to a state where kswapd does
something about the order-1 free areas.

This might postpone the problem indefinately.

Currently the system fails early, without kswapd
kicking in and freeing new order-1 areas.

-- 
All rights reversed.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Mel Gorman]

On Mon, Jun 08, 2009 at 09:20:23AM -0400, Rik van Riel wrote:
> Mel Gorman wrote:
>
>> We've encountered this before and the conclusion was that the current
>> adjustments for watermark calculations of high-order allocations is right,
>> or at least there is no better alternative. In other words, the page
>> allocator in this instance is behaving as expected. Do we want to
>> revisit that discussion as to whether the watermark calculations for
>> high-order allocation should change? I think we'll reach the same
>> conclusion or at least decide that allowing the order-1 atomic
>> allocation to succeed here would just postpone the problem.
>
> It would not just postpone the problem, it would also
> bring the system closer to a state where kswapd does
> something about the order-1 free areas.
>
> This might postpone the problem indefinately.
>

How do you figure it does not just postpone the problem? If there are a batch
of order-1 allocations that come in like this, it will eventually deplete
the higher-order pages and then fail because kswapd is not getting woken up.

Minimally, if we were to ignore the watermarks, there would need to be logic
that says

	"If a high-order allocation would fail due to high-order watermarks
	not being met, but the watermarks are ok from an order-0 perspective
	and the high-order page is available, then grant the allocation but
	wake up kswapd as if the order-1 allocation had failed to get the
	high-order watermarks back in shape"

> Currently the system fails early, without kswapd
> kicking in and freeing new order-1 areas.
>

If the allocation was granted, then kswapd will still not kick in.

-- 
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Mel Gorman wrote:
>
> Larry, can you post the contents of /proc/slabinfo so we can see
> what size pages are being used for the kmalloc() buckets please?

The system is not generating the failures at the moment, but here is
the current state:

finger@larrylap:~/wireless-testing> cat /proc/slabinfo
slabinfo - version: 2.1
# name            <active_objs> <num_objs> <objsize> <objperslab>
<pagesperslab> : tunables <limit> <batchcount> <sharedfactor> :
slabdata <active_slabs> <num_slabs> <sharedavail>
nfs_direct_cache       0      0    288   14    1 : tunables    0    0
   0 : slabdata      0      0      0
nfs_write_data        42     42    768   21    4 : tunables    0    0
   0 : slabdata      2      2      0
nfs_read_data         42     42    768   21    4 : tunables    0    0
   0 : slabdata      2      2      0
nfs_inode_cache       20     20   1568   20    8 : tunables    0    0
   0 : slabdata      1      1      0
nfs_page               0      0    192   21    1 : tunables    0    0
   0 : slabdata      0      0      0
rpc_buffers           30     30   2176   15    8 : tunables    0    0
   0 : slabdata      2      2      0
rpc_tasks             42     42    384   21    2 : tunables    0    0
   0 : slabdata      2      2      0
rpc_inode_cache       23     23   1408   23    8 : tunables    0    0
   0 : slabdata      1      1      0
fuse_request         351    352    720   22    4 : tunables    0    0
   0 : slabdata     16     16      0
fuse_inode           325    325   1216   13    4 : tunables    0    0
   0 : slabdata     25     25      0
ext4_inode_cache   17180  17180   1568   20    8 : tunables    0    0
   0 : slabdata    859    859      0
ext4_xattr             0      0    160   25    1 : tunables    0    0
   0 : slabdata      0      0      0
ext4_free_block_extents      0      0    128   32    1 : tunables    0
   0    0 : slabdata      0      0      0
ext4_alloc_context      0      0    216   18    1 : tunables    0    0
   0 : slabdata      0      0      0
ext4_prealloc_space      0      0    216   18    1 : tunables    0
0    0 : slabdata      0      0      0
jbd2_journal_handle     68     68    120   34    1 : tunables    0
0    0 : slabdata      2      2      0
jbd2_journal_head   3734   3784    184   22    1 : tunables    0    0
   0 : slabdata    172    172      0
jbd2_revoke_table     46     46     88   46    1 : tunables    0    0
   0 : slabdata      1      1      0
jbd2_revoke_record      0      0    128   32    1 : tunables    0    0
   0 : slabdata      0      0      0
kcopyd_job             0      0    528   15    2 : tunables    0    0
   0 : slabdata      0      0      0
dm_rq_clone_bio_info      0      0     88   46    1 : tunables    0
 0    0 : slabdata      0      0      0
dm_rq_target_io        0      0    480   17    2 : tunables    0    0
   0 : slabdata      0      0      0
dm_target_io           0      0     96   42    1 : tunables    0    0
   0 : slabdata      0      0      0
dm_io                  0      0    104   39    1 : tunables    0    0
   0 : slabdata      0      0      0
uhci_urb_priv          0      0    128   32    1 : tunables    0    0
   0 : slabdata      0      0      0
ext3_inode_cache   69341  69345   1408   23    8 : tunables    0    0
   0 : slabdata   3015   3015      0
ext3_xattr           325    325    160   25    1 : tunables    0    0
   0 : slabdata     13     13      0
journal_handle        68     68    120   34    1 : tunables    0    0
   0 : slabdata      2      2      0
journal_head        2473   4642    184   22    1 : tunables    0    0
   0 : slabdata    211    211      0
revoke_table          46     46     88   46    1 : tunables    0    0
   0 : slabdata      1      1      0
revoke_record         64     64    128   32    1 : tunables    0    0
   0 : slabdata      2      2      0
scsi_sense_cache      46     63    192   21    1 : tunables    0    0
   0 : slabdata      3      3      0
scsi_cmd_cache        28     36    320   12    1 : tunables    0    0
   0 : slabdata      3      3      0
sgpool-128            16     21   4224    7    8 : tunables    0    0
   0 : slabdata      3      3      0
sgpool-64             30     30   2176   15    8 : tunables    0    0
   0 : slabdata      2      2      0
sgpool-32             28     28   1152   14    4 : tunables    0    0
   0 : slabdata      2      2      0
sgpool-16             24     24    640   12    2 : tunables    0    0
   0 : slabdata      2      2      0
sgpool-8              44     63    384   21    2 : tunables    0    0
   0 : slabdata      3      3      0
scsi_data_buffer       0      0     96   42    1 : tunables    0    0
   0 : slabdata      0      0      0
flow_cache             0      0    168   24    1 : tunables    0    0
   0 : slabdata      0      0      0
cfq_io_context        93    102    240   17    1 : tunables    0    0
   0 : slabdata      6      6      0
cfq_queue             97    102    240   17    1 : tunables    0    0
   0 : slabdata      6      6      0
mqueue_inode_cache     23     23   1408   23    8 : tunables    0    0
   0 : slabdata      1      1      0
isofs_inode_cache      0      0   1088   15    4 : tunables    0    0
   0 : slabdata      0      0      0
kioctx                 0      0    640   12    2 : tunables    0    0
   0 : slabdata      0      0      0
kiocb                  0      0    320   12    1 : tunables    0    0
   0 : slabdata      0      0      0
inotify_event_cache     72     72    112   36    1 : tunables    0
0    0 : slabdata      2      2      0
inotify_watch_cache    224    224    144   28    1 : tunables    0
0    0 : slabdata      8      8      0
fasync_cache          42     42     96   42    1 : tunables    0    0
   0 : slabdata      1      1      0
shmem_inode_cache   1485   1488   1344   12    4 : tunables    0    0
   0 : slabdata    124    124      0
nsproxy                0      0    120   34    1 : tunables    0    0
   0 : slabdata      0      0      0
posix_timers_cache     26     26    304   13    1 : tunables    0    0
   0 : slabdata      2      2      0
uid_cache             24     24    320   12    1 : tunables    0    0
   0 : slabdata      2      2      0
UNIX                 354    360   1344   12    4 : tunables    0    0
   0 : slabdata     30     30      0
ip_mrt_cache           0      0    192   21    1 : tunables    0    0
   0 : slabdata      0      0      0
UDP-Lite               0      0   1216   13    4 : tunables    0    0
   0 : slabdata      0      0      0
tcp_bind_bucket       64     64    128   32    1 : tunables    0    0
   0 : slabdata      2      2      0
inet_peer_cache       21     21    192   21    1 : tunables    0    0
   0 : slabdata      1      1      0
secpath_cache          0      0    128   32    1 : tunables    0    0
   0 : slabdata      0      0      0
xfrm_dst_cache         0      0    448   18    2 : tunables    0    0
   0 : slabdata      0      0      0
ip_fib_alias           0      0    104   39    1 : tunables    0    0
   0 : slabdata      0      0      0
ip_fib_hash           56     56    144   28    1 : tunables    0    0
   0 : slabdata      2      2      0
ip_dst_cache          36     36    448   18    2 : tunables    0    0
   0 : slabdata      2      2      0
arp_cache             36     36    448   18    2 : tunables    0    0
   0 : slabdata      2      2      0
RAW                   14     14   1152   14    4 : tunables    0    0
   0 : slabdata      1      1      0
UDP                   26     26   1216   13    4 : tunables    0    0
   0 : slabdata      2      2      0
tw_sock_TCP           32     32    256   16    1 : tunables    0    0
   0 : slabdata      2      2      0
request_sock_TCP      21     21    192   21    1 : tunables    0    0
   0 : slabdata      1      1      0
TCP                   34     45   2176   15    8 : tunables    0    0
   0 : slabdata      3      3      0
eventpoll_pwq        110    112    144   28    1 : tunables    0    0
   0 : slabdata      4      4      0
eventpoll_epi         94     96    256   16    1 : tunables    0    0
   0 : slabdata      6      6      0
blkdev_queue          22     22   2736   11    8 : tunables    0    0
   0 : slabdata      2      2      0
blkdev_requests       40     54    440   18    2 : tunables    0    0
   0 : slabdata      3      3      0
blkdev_ioc           101    105    192   21    1 : tunables    0    0
   0 : slabdata      5      5      0
bio-0                 32     32    256   16    1 : tunables    0    0
   0 : slabdata      2      2      0
biovec-256             7      7   4224    7    8 : tunables    0    0
   0 : slabdata      1      1      0
biovec-128            30     30   2176   15    8 : tunables    0    0
   0 : slabdata      2      2      0
biovec-64             28     28   1152   14    4 : tunables    0    0
   0 : slabdata      2      2      0
biovec-16             42     42    384   21    2 : tunables    0    0
   0 : slabdata      2      2      0
sock_inode_cache     397    406   1152   14    4 : tunables    0    0
   0 : slabdata     29     29      0
skbuff_fclone_cache     32     32    512   16    2 : tunables    0
0    0 : slabdata      2      2      0
skbuff_head_cache    593    600    320   12    1 : tunables    0    0
   0 : slabdata     50     50      0
file_lock_cache       39     42    288   14    1 : tunables    0    0
   0 : slabdata      3      3      0
Acpi-Operand        1301   1316    144   28    1 : tunables    0    0
   0 : slabdata     47     47      0
Acpi-ParseExt         56     56    144   28    1 : tunables    0    0
   0 : slabdata      2      2      0
Acpi-Parse            68     68    120   34    1 : tunables    0    0
   0 : slabdata      2      2      0
Acpi-State            52     52    152   26    1 : tunables    0    0
   0 : slabdata      2      2      0
Acpi-Namespace       897    897    104   39    1 : tunables    0    0
   0 : slabdata     23     23      0
task_delay_info      247    255    232   17    1 : tunables    0    0
   0 : slabdata     15     15      0
taskstats             40     40    400   20    2 : tunables    0    0
   0 : slabdata      2      2      0
proc_inode_cache    1709   1725   1088   15    4 : tunables    0    0
   0 : slabdata    115    115      0
sigqueue              34     34    232   17    1 : tunables    0    0
   0 : slabdata      2      2      0
radix_tree_node    22109  22126    624   13    2 : tunables    0    0
   0 : slabdata   1702   1702      0
bdev_cache            42     42   1536   21    8 : tunables    0    0
   0 : slabdata      2      2      0
sysfs_dir_cache    12246  12246    152   26    1 : tunables    0    0
   0 : slabdata    471    471      0
mnt_cache             47     48    320   12    1 : tunables    0    0
   0 : slabdata      4      4      0
filp                2971   3150    384   21    2 : tunables    0    0
   0 : slabdata    150    150      0
inode_cache         3185   3195   1040   15    4 : tunables    0    0
   0 : slabdata    213    213      0
dentry            274295 274300    312   13    1 : tunables    0    0
   0 : slabdata  21100  21100      0
names_cache           14     14   4224    7    8 : tunables    0    0
   0 : slabdata      2      2      0
key_jar                0      0    320   12    1 : tunables    0    0
   0 : slabdata      0      0      0
buffer_head       120232 120244    176   23    1 : tunables    0    0
   0 : slabdata   5228   5228      0
vm_area_struct     10385  10768    248   16    1 : tunables    0    0
   0 : slabdata    673    673      0
mm_struct            111    140   1152   14    4 : tunables    0    0
   0 : slabdata     10     10      0
fs_cache             125    147    192   21    1 : tunables    0    0
   0 : slabdata      7      7      0
files_cache          122    144    896   18    4 : tunables    0    0
   0 : slabdata      8      8      0
signal_cache         164    192   1024   16    4 : tunables    0    0
   0 : slabdata     12     12      0
sighand_cache        161    182   2240   14    8 : tunables    0    0
   0 : slabdata     13     13      0
task_xstate           66     72    640   12    2 : tunables    0    0
   0 : slabdata      6      6      0
task_struct          241    256   3872    8    8 : tunables    0    0
   0 : slabdata     32     32      0
cred_jar             366    560    256   16    1 : tunables    0    0
   0 : slabdata     35     35      0
anon_vma            2206   2310    136   30    1 : tunables    0    0
   0 : slabdata     77     77      0
pid                  257    273    192   21    1 : tunables    0    0
   0 : slabdata     13     13      0
shared_policy_node      0      0    120   34    1 : tunables    0    0
   0 : slabdata      0      0      0
numa_policy           42     42     96   42    1 : tunables    0    0
   0 : slabdata      1      1      0
idr_layer_cache      403    403    616   13    2 : tunables    0    0
   0 : slabdata     31     31      0
kmalloc-8192          28     30   8264    3    8 : tunables    0    0
   0 : slabdata     10     10      0
kmalloc-4096         661    665   4168    7    8 : tunables    0    0
   0 : slabdata     95     95      0
kmalloc-2048         335    360   2120   15    8 : tunables    0    0
   0 : slabdata     24     24      0
kmalloc-1024         479    609   1096   29    8 : tunables    0    0
   0 : slabdata     21     21      0
kmalloc-512          783    784    584   14    2 : tunables    0    0
   0 : slabdata     56     56      0
kmalloc-256          535    552    328   12    1 : tunables    0    0
   0 : slabdata     46     46      0
kmalloc-128          309    360    200   20    1 : tunables    0    0
   0 : slabdata     18     18      0
kmalloc-64          2430   2520    136   30    1 : tunables    0    0
   0 : slabdata     84     84      0
kmalloc-32           656    663    104   39    1 : tunables    0    0
   0 : slabdata     17     17      0
kmalloc-16          2250   2254     88   46    1 : tunables    0    0
   0 : slabdata     49     49      0
kmalloc-8           3619   3621     80   51    1 : tunables    0    0
   0 : slabdata     71     71      0
kmalloc-192         1449   1455    264   15    1 : tunables    0    0
   0 : slabdata     97     97      0
kmalloc-96           726    816    168   24    1 : tunables    0    0
   0 : slabdata     34     34      0
kmem_cache_node        0      0    176   23    1 : tunables    0    0
   0 : slabdata      0      0      0

>
> Larry, you say the buffer is 700-800 bytes. Can you confirm that 800
bytes
> is roughly the request size being made by ieee80211_skb_resize()?

For some of the failures, the size was in the 700-800 range, but the
ones I found in my logs called pskb_expand_head() with skb->data_len
of 1962. For those calls, head_need and tail_need were both 0.

Larry

[Bug #13313] vm86old oops

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13313
Subject		: vm86old oops
Submitter	: Sergey Senozhatsky <sergey.senozhatsky-A/MS7pq9VAU@public.gmane.org>
Date		: 2009-05-14 21:53 (25 days old)

Re: [Bug #13313] vm86old oops

[Sergey Senozhatsky]

On (06/07/09 11:52), Rafael J. Wysocki wrote:
>
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13313
> Subject		: vm86old oops
> Submitter	: Sergey Senozhatsky <sergey.senozhatsky-A/MS7pq9VAU@public.gmane.org>
> Date		: 2009-05-14 21:53 (25 days old)
> 

Hello Rafael.

commit 3aa6b186f86c5d06d6d92d14311ffed51f091f40
Author: Lubomir Rintel <lkundrak-NGH9Lh4a5iE@public.gmane.org>
Date:   Sun Jun 7 16:23:48 2009 +0200

x86: Fix non-lazy GS handling in sys_vm86()


        Sergey

[Bug #13330] nfs4 NULL pointer dereference in _nfs4_do_setlk

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13330
Subject		: nfs4 NULL pointer dereference in _nfs4_do_setlk
Submitter	: Rich Ercolani <rercola-YxllIAoeIHiVc3sceRu5cw@public.gmane.org>
Date		: 2009-05-17 04:44 (22 days old)
Handled-By	: Trond Myklebust <trond.myklebust-41N18TsMXrtuMpJDpNschA@public.gmane.org>

Re: [Bug #13330] nfs4 NULL pointer dereference in _nfs4_do_setlk

[Trond Myklebust]

On Sun, 2009-06-07 at 11:52 +0200, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13330
> Subject		: nfs4 NULL pointer dereference in _nfs4_do_setlk
> Submitter	: Rich Ercolani <rercola-YxllIAoeIHiVc3sceRu5cw@public.gmane.org>
> Date		: 2009-05-17 04:44 (22 days old)
> Handled-By	: Trond Myklebust <trond.myklebust-41N18TsMXrtuMpJDpNschA@public.gmane.org>

It should still be listed. I do believe I've finally identified the
cause, and have provided a patch, however that fix has not yet been
verified by Rich...

Cheers
  Trond

Re: [Bug #13330] nfs4 NULL pointer dereference in _nfs4_do_setlk

[Rafael J. Wysocki]

On Sunday 07 June 2009, Trond Myklebust wrote:
> On Sun, 2009-06-07 at 11:52 +0200, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> > 
> > The following bug entry is on the current list of known regressions
> > from 2.6.29.  Please verify if it still should be listed and let me know
> > (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13330
> > Subject		: nfs4 NULL pointer dereference in _nfs4_do_setlk
> > Submitter	: Rich Ercolani <rercola-YxllIAoeIHiVc3sceRu5cw@public.gmane.org>
> > Date		: 2009-05-17 04:44 (22 days old)
> > Handled-By	: Trond Myklebust <trond.myklebust-41N18TsMXrtuMpJDpNschA@public.gmane.org>
> 
> It should still be listed. I do believe I've finally identified the
> cause, and have provided a patch, however that fix has not yet been
> verified by Rich...

OK, thanks for the update.

Best,
Rafael

[Bug #13337] [post 2.6.29 regression] hang during suspend of b44/b43 modules

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13337
Subject		: [post 2.6.29 regression] hang during suspend of b44/b43 modules
Submitter	: Tomas Janousek <tomi-YoqI/XImC7s@public.gmane.org>
Date		: 2009-05-18 10:59 (21 days old)

[Bug #13341] Random Oops at boot at loading ip6tables rules

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick-nxAOmsU53hB6lmGzAMPh1A@public.gmane.org>
Date		: 2009-05-19 09:08 (20 days old)
Handled-By	: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>

[Bug #13328] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (36 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4

Re: [Bug #13328] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.

[Francis Moreau]

Hello

On Sun, Jun 7, 2009 at 11:52 AM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).

I just pulled the 2.6.30-rc8 kernel.

I'm giving it a test during this week and let you know if the bug
comes up again.

-- 
Francis

Re: [Bug #13328] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.

[Francis Moreau]

On Mon, Jun 8, 2009 at 9:29 AM, Francis Moreau<francis.moro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Hello
>
> On Sun, Jun 7, 2009 at 11:52 AM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
>> This message has been generated automatically as a part of a report
>> of recent regressions.
>>
>> The following bug entry is on the current list of known regressions
>> from 2.6.29.  Please verify if it still should be listed and let me know
>> (either way).
>
> I just pulled the 2.6.30-rc8 kernel.
>
> I'm giving it a test during this week and let you know if the bug
> comes up again.
>

It's still there on 2.6.30-rc8

-- 
Francis

Re: [Bug #13328] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.

[Rafael J. Wysocki]

On Friday 12 June 2009, Francis Moreau wrote:
> On Mon, Jun 8, 2009 at 9:29 AM, Francis Moreau<francis.moro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > Hello
> >
> > On Sun, Jun 7, 2009 at 11:52 AM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> >> This message has been generated automatically as a part of a report
> >> of recent regressions.
> >>
> >> The following bug entry is on the current list of known regressions
> >> from 2.6.29.  Please verify if it still should be listed and let me know
> >> (either way).
> >
> > I just pulled the 2.6.30-rc8 kernel.
> >
> > I'm giving it a test during this week and let you know if the bug
> > comes up again.
> >
> 
> It's still there on 2.6.30-rc8

Thanks for the update.

Best,
Rafael

[Bug #13362] rt2x00: slow wifi with correct basic rate bitmap

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-22 13:32 (17 days old)

Re: [Bug #13362] rt2x00: slow wifi with correct basic rate bitmap

[Alejandro Riveira Fernández]

El Sun,  7 Jun 2009 11:52:52 +0200 (CEST)
"Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org> escribió:

> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).

 Well the problem is still there afaics.

> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
> Subject		: rt2x00: slow wifi with correct basic rate bitmap
> Submitter	: Alejandro Riveira <ariveira-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date		: 2009-05-22 13:32 (17 days old)
> 
> 

Re: [Bug #13362] rt2x00: slow wifi with correct basic rate bitmap

[Rafael J. Wysocki]

On Sunday 07 June 2009, Alejandro Riveira Fernández wrote:
> El Sun,  7 Jun 2009 11:52:52 +0200 (CEST)
> "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org> escribió:
> 
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> > 
> > The following bug entry is on the current list of known regressions
> > from 2.6.29.  Please verify if it still should be listed and let me know
> > (either way).
> 
>  Well the problem is still there afaics.

Thanks for the update.

Best,
Rafael

[Bug #13351] 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Date		: 2009-05-20 14:09 (19 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[Bug #13366] About 80% of shutdowns fail (blocking)

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13366
Subject		: About 80% of shutdowns fail (blocking)
Submitter	: Martin Bammer <mrb74-RbZlAiThDcE@public.gmane.org>
Date		: 2009-05-23 00:58 (16 days old)

Re: [Bug #13366] About 80% of shutdowns fail (blocking)

[Martin Bammer]

Since i disabled most of the debug options this problem has gone. IMHO
this issue has been caused by kdbg.

Am Sonntag, den 07.06.2009, 11:52 +0200 schrieb Rafael J. Wysocki:
> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13366
> Subject		: About 80% of shutdowns fail (blocking)
> Submitter	: Martin Bammer <mrb74-RbZlAiThDcE@public.gmane.org>
> Date		: 2009-05-23 00:58 (16 days old)
> 
> 

Re: [Bug #13366] About 80% of shutdowns fail (blocking)

[Rafael J. Wysocki]

On Sunday 07 June 2009, Martin Bammer wrote:
> Since i disabled most of the debug options this problem has gone. IMHO
> this issue has been caused by kdbg.

Thanks for the update, I've dropped the bug from the list of recent
regressions.

Best,
Rafael

[Bug #13389] Warning 'Invalid throttling state, reset' gets displayed when it should not be

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org>
Date		: 2009-05-26 15:24 (13 days old)
Handled-By	: Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672

Re: [Bug #13389] Warning 'Invalid throttling state, reset' gets displayed when it should not be

[Frans Pop]

On Sunday 07 June 2009, Rafael J. Wysocki wrote:
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me
> know (either way).
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
> Subject	: Warning 'Invalid throttling state, reset' gets displayed when
> 		  it should not be
> Submitter	: Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org>  
> Date		: 2009-05-26 15:24 (13 days old)
> Handled-By	: Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org>
> Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
> 		  http://bugzilla.kernel.org/attachment.cgi?id=21672

Issue is still present. Unfortunately I've not yet seen any reaction from 
the maintainers (CCs added) to the patches I proposed.

[Bug #13374] reiserfs blocked for more than 120secs

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel-zqRNUXuvxA0b1SvskN2V4Q@public.gmane.org>
Date		: 2009-05-23 8:52 (16 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4
		  http://lkml.org/lkml/2009/5/29/389

[Bug #13373] fbcon, intelfb, i915: INFO: possible circular locking dependency detected

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-23 5:08 (16 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4

[Bug #13391] Kernel boot hangs at about every second start when kms is activated

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13391
Subject		: Kernel boot hangs at about every second start when kms is activated
Submitter	: Martin Bammer <mrb74-RbZlAiThDcE@public.gmane.org>
Date		: 2009-05-26 21:47 (13 days old)

Re: [Bug #13391] Kernel boot hangs at about every second start when kms is activated

[Martin Bammer]

Since i disabled most of the debug options this problem has gone. IMHO
this issue has been caused by kdbg.

Am Sonntag, den 07.06.2009, 11:52 +0200 schrieb Rafael J. Wysocki:
> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13391
> Subject		: Kernel boot hangs at about every second start when kms is activated
> Submitter	: Martin Bammer <mrb74-RbZlAiThDcE@public.gmane.org>
> Date		: 2009-05-26 21:47 (13 days old)
> 
> 

Re: [Bug #13391] Kernel boot hangs at about every second start when kms is activated

[Rafael J. Wysocki]

On Sunday 07 June 2009, Martin Bammer wrote:
> Since i disabled most of the debug options this problem has gone. IMHO
> this issue has been caused by kdbg.

Thanks for the update, I've dropped the bug from the list.

Best,
Rafael

[Bug #13401] pktcdvd writing is really slow with CFQ scheduler (bisected)

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard-GANU6spQydw@public.gmane.org>
Date		: 2009-05-28 18:43 (11 days old)

[Bug #13423] JMicron SATA controller not available

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13423
Subject		: JMicron SATA controller not available
Submitter	: Marc Dionne <marc.c.dionne-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-26 22:56 (13 days old)
References	: http://lkml.org/lkml/2009/5/26/687
Handled-By	: Yu Zhao <yu.zhao-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Patch		: http://lkml.org/lkml/2009/5/27/402

Re: [Bug #13423] JMicron SATA controller not available

[Marc Dionne]

On 06/07/2009 05:52 AM, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13423
> Subject		: JMicron SATA controller not available
> Submitter	: Marc Dionne<marc.c.dionne-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date		: 2009-05-26 22:56 (13 days old)
> References	: http://lkml.org/lkml/2009/5/26/687
> Handled-By	: Yu Zhao<yu.zhao-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Patch		: http://lkml.org/lkml/2009/5/27/402

I verified that the bug is still there in mainline from this morning.

The fix is part of this pull request:
	http://lkml.org/lkml/2009/6/6/148
so hopefully it will make it in before the final release.

Marc

Re: [Bug #13423] JMicron SATA controller not available

[Rafael J. Wysocki]

On Sunday 07 June 2009, Marc Dionne wrote:
> On 06/07/2009 05:52 AM, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.29.  Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13423
> > Subject		: JMicron SATA controller not available
> > Submitter	: Marc Dionne<marc.c.dionne-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Date		: 2009-05-26 22:56 (13 days old)
> > References	: http://lkml.org/lkml/2009/5/26/687
> > Handled-By	: Yu Zhao<yu.zhao-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> > Patch		: http://lkml.org/lkml/2009/5/27/402
> 
> I verified that the bug is still there in mainline from this morning.
> 
> The fix is part of this pull request:
> 	http://lkml.org/lkml/2009/6/6/148
> so hopefully it will make it in before the final release.

Thanks for the update.

Best,
Rafael

Re: [Bug #13423] JMicron SATA controller not available

[Marc Dionne]

On 06/07/2009 05:13 PM, Rafael J. Wysocki wrote:
> On Sunday 07 June 2009, Marc Dionne wrote:
>> On 06/07/2009 05:52 AM, Rafael J. Wysocki wrote:
>>> This message has been generated automatically as a part of a report
>>> of recent regressions.
>>>
>>> The following bug entry is on the current list of known regressions
>>> from 2.6.29.  Please verify if it still should be listed and let me know
>>> (either way).
>>>
>>>
>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13423
>>> Subject		: JMicron SATA controller not available
>>> Submitter	: Marc Dionne<marc.c.dionne-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>> Date		: 2009-05-26 22:56 (13 days old)
>>> References	: http://lkml.org/lkml/2009/5/26/687
>>> Handled-By	: Yu Zhao<yu.zhao-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>>> Patch		: http://lkml.org/lkml/2009/5/27/402
>> I verified that the bug is still there in mainline from this morning.
>>
>> The fix is part of this pull request:
>> 	http://lkml.org/lkml/2009/6/6/148
>> so hopefully it will make it in before the final release.
>
> Thanks for the update.
>
> Best,
> Rafael

Now in mainline as commit f79b1b146b52765ee38bfb91bb14eb850fa98017

I tested that current git does indeed fix the problem - my DVD writer is 
now detected and functional through the JMicron controller.

The bug can be closed.

Thanks,
Marc

[Bug #13408] Performance regression in 2.6.30-rc7

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-30 18:51 (9 days old)
References	: http://lkml.org/lkml/2009/5/30/146

[Bug #13407] adb trackpad disappears after suspend to ram

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz-wOpdxP1gw6Cc+IqHO83+wjjhTm2NLCe8@public.gmane.org>
Date		: 2009-05-28 7:59 (11 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org>

Re: [Bug #13407] adb trackpad disappears after suspend to ram

[Jan Scholz]

The bug is still present in v2.6.31-rc1

Cheers,
   Jan

"Rafael J. Wysocki" <rjw@sisk.pl> writes:

> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
> Subject		: adb trackpad disappears after suspend to ram
> Submitter	: Jan Scholz <scholz@fias.uni-frankfurt.de>
> Date		: 2009-05-28 7:59 (11 days old)
> First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
> References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
> Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>
>

[Bug #13424] possible deadlock when doing governor switching

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13424
Subject		: possible deadlock when doing governor switching
Submitter	: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-31 16:36 (8 days old)
References	: http://www.spinics.net/lists/cpufreq/msg00711.html
Handled-By	: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>

[Bug #13470] Machine doesn't boot due to mmconfig detection problem

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13470
Subject		: Machine doesn't boot due to mmconfig detection problem
Submitter	: Pascal Terjan <pterjan-4qZELD6FgxhWk0Htik3J/w@public.gmane.org>
Date		: 2009-05-29 19:35 (10 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=044cd80942e47b9de0915b627902adf05c52377f
References	: http://marc.info/?l=linux-kernel&m=124388792118481&w=4
Handled-By	: Yinghai Lu <yinghai-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/27613/

[Bug #13446] resume after suspend-to-ram broken on Toshiba Satellite A100 with 2.6.30-rc8 (works in 2.6.28)

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13446
Subject		: resume after suspend-to-ram broken on Toshiba Satellite A100 with 2.6.30-rc8 (works in 2.6.28)
Submitter	: Andrea Iob <andrea_iob-whZMOeQn8C0@public.gmane.org>
Date		: 2009-06-03 21:42 (5 days old)

[Bug #13462] Unused bands in intefb console and smaller 180x56 -> 128x48

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13462
Subject		: Unused bands in intefb console and smaller 180x56 -> 128x48
Submitter	: Santi <santi-wpr36wD7VxHR7s880joybQ@public.gmane.org>
Date		: 2009-06-05 16:30 (3 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c9fb15f60eb517c958dec64dca9357bf62bf2201
Handled-By	: Keith Packard <keithp-aN4HjG94KOLQT0dZR+AlfA@public.gmane.org>
Patch		: http://bugzilla.kernel.org/show_bug.cgi?id=13462#c2

[Bug #13471] Loading parport_pc kills the keyboard if ACPI is enabled

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13471
Subject		: Loading parport_pc kills the keyboard if ACPI is enabled
Submitter	: Ozan Çağlayan <ozan-caicS1wCkhO6A22drWdTBw@public.gmane.org>
Date		: 2009-06-04 9:12 (4 days old)
References	: http://marc.info/?l=linux-kernel&m=124410667532558&w=4

Re: [Bug #13471] Loading parport_pc kills the keyboard if ACPI is enabled

[Ozan Çağlayan]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13471
> Subject		: Loading parport_pc kills the keyboard if ACPI is enabled
> Submitter	: Ozan Çağlayan <ozan-caicS1wCkhO6A22drWdTBw@public.gmane.org>
> Date		: 2009-06-04 9:12 (4 days old)
> References	: http://marc.info/?l=linux-kernel&m=124410667532558&w=4
>   

The problem is still around, no news.

Thanks.

Re: [Bug #13471] Loading parport_pc kills the keyboard if ACPI is enabled

[Rafael J. Wysocki]

On Sunday 07 June 2009, Ozan Çağlayan wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.29.  Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13471
> > Subject		: Loading parport_pc kills the keyboard if ACPI is enabled
> > Submitter	: Ozan Çağlayan <ozan-caicS1wCkhO6A22drWdTBw@public.gmane.org>
> > Date		: 2009-06-04 9:12 (4 days old)
> > References	: http://marc.info/?l=linux-kernel&m=124410667532558&w=4
> >   
> 
> The problem is still around, no news.

Thanks for the update.

Best,
Rafael

[Bug #13475] suspend/hibernate lockdep warning

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13475
Subject		: suspend/hibernate lockdep warning
Submitter	: Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-06-02 10:00 (6 days old)
References	: http://marc.info/?l=linux-kernel&m=124393723321241&w=4

Re: [Bug #13475] suspend/hibernate lockdep warning

[Pekka Enberg]

On Sun, Jun 7, 2009 at 12:52 PM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> Subject         : suspend/hibernate lockdep warning
> Submitter       : Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date            : 2009-06-02 10:00 (6 days old)
> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4

Looks like a cpufreq locking problem to me. Lets add some
get_maintainer.pl loving to the cc list. Can you post your .config
too, btw?

                                 Pekka

Re: [Bug #13475] suspend/hibernate lockdep warning

[Dave Young]

On Sun, Jun 7, 2009 at 9:21 PM, Pekka Enberg<penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org> wrote:
> On Sun, Jun 7, 2009 at 12:52 PM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
>> This message has been generated automatically as a part of a report
>> of recent regressions.
>>
>> The following bug entry is on the current list of known regressions
>> from 2.6.29.  Please verify if it still should be listed and let me know
>> (either way).
>>
>>
>> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
>> Subject         : suspend/hibernate lockdep warning
>> Submitter       : Dave Young <hidave.darkstar@gmail.com>
>> Date            : 2009-06-02 10:00 (6 days old)
>> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
>
> Looks like a cpufreq locking problem to me. Lets add some
> get_maintainer.pl loving to the cc list. Can you post your .config
> too, btw?

I suspect the following commit, after revert this patch I test 5 times
without lockdep warnings.

commit b14893a62c73af0eca414cfed505b8c09efc613c
Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
Date:   Sun May 17 10:30:45 2009 -0400

	[CPUFREQ] fix timer teardown in ondemand governor


Please see the config:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc7
# Wed Jun  3 10:33:40 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_VMI is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_DELL_LAPTOP=m
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=m
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
CONFIG_HOSTAP=m
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not set
# CONFIG_HOSTAP_CS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_PPPOL2TP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO expanders:
#

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
CONFIG_FB_INTEL_DEBUG=y
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SDRICOH_CS=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_ME4000 is not set
# CONFIG_MEILHAUS is not set
# CONFIG_USB_IP_COMMON is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_USB_ATMEL is not set
# CONFIG_AGNX is not set
# CONFIG_OTUS is not set
# CONFIG_RT2860 is not set
# CONFIG_RT2870 is not set
# CONFIG_RT3070 is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_ALTERA_PCIE_CHDMA is not set
# CONFIG_RTL8187SE is not set
# CONFIG_INPUT_MIMIO is not set
# CONFIG_TRANZPORT is not set
# CONFIG_EPL is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_ANDROID_BINDER_IPC is not set
# CONFIG_ANDROID_LOGGER is not set
# CONFIG_ANDROID_RAM_CONSOLE is not set
# CONFIG_ANDROID_TIMED_GPIO is not set
# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
# CONFIG_DST is not set
# CONFIG_POHMELFS is not set
# CONFIG_STLC45XX is not set
# CONFIG_B3DFG is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_PLAN9AUTH is not set
# CONFIG_HECI is not set
# CONFIG_LINE6_USB is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_WMI=m
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACING_SUPPORT=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_TRACE is not set
CONFIG_LGUEST=m
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y

Re: [Bug #13475] suspend/hibernate lockdep warning

[Pekka Enberg]

On Mon, 2009-06-08 at 15:35 +0800, Dave Young wrote:
> On Sun, Jun 7, 2009 at 9:21 PM, Pekka Enberg<penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org> wrote:
> > On Sun, Jun 7, 2009 at 12:52 PM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> >> This message has been generated automatically as a part of a report
> >> of recent regressions.
> >>
> >> The following bug entry is on the current list of known regressions
> >> from 2.6.29.  Please verify if it still should be listed and let me know
> >> (either way).
> >>
> >>
> >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> >> Subject         : suspend/hibernate lockdep warning
> >> Submitter       : Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >> Date            : 2009-06-02 10:00 (6 days old)
> >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> >
> > Looks like a cpufreq locking problem to me. Lets add some
> > get_maintainer.pl loving to the cc list. Can you post your .config
> > too, btw?
> 
> I suspect the following commit, after revert this patch I test 5 times
> without lockdep warnings.
> 
> commit b14893a62c73af0eca414cfed505b8c09efc613c
> Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> Date:   Sun May 17 10:30:45 2009 -0400
> 
> 	[CPUFREQ] fix timer teardown in ondemand governor

The patch is probably not at fault here. I suspect it's some latent bug
that simply got exposed by the change to cancel_delayed_work_sync(). In
any case, Mathieu, can you take a look at this please?

			Pekka

> Please see the config:
> 
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.30-rc7
> # Wed Jun  3 10:33:40 2009
> #
> # CONFIG_64BIT is not set
> CONFIG_X86_32=y
> # CONFIG_X86_64 is not set
> CONFIG_X86=y
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
> CONFIG_GENERIC_TIME=y
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_FAST_CMPXCHG_LOCAL=y
> CONFIG_MMU=y
> CONFIG_ZONE_DMA=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_GPIO=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> # CONFIG_GENERIC_TIME_VSYSCALL is not set
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
> # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> # CONFIG_ZONE_DMA32 is not set
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> # CONFIG_AUDIT_ARCH is not set
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_USE_GENERIC_SMP_HELPERS=y
> CONFIG_X86_32_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_TRAMPOLINE=y
> CONFIG_X86_32_LAZY_GS=y
> CONFIG_KTIME_SCALAR=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> 
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_KERNEL_GZIP=y
> # CONFIG_KERNEL_BZIP2 is not set
> # CONFIG_KERNEL_LZMA is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_AUDIT_TREE=y
> 
> #
> # RCU Subsystem
> #
> CONFIG_CLASSIC_RCU=y
> # CONFIG_TREE_RCU is not set
> # CONFIG_PREEMPT_RCU is not set
> # CONFIG_TREE_RCU_TRACE is not set
> # CONFIG_PREEMPT_RCU_TRACE is not set
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> CONFIG_LOG_BUF_SHIFT=18
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> CONFIG_GROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> # CONFIG_RT_GROUP_SCHED is not set
> # CONFIG_USER_SCHED is not set
> CONFIG_CGROUP_SCHED=y
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> CONFIG_CGROUP_NS=y
> # CONFIG_CGROUP_FREEZER is not set
> # CONFIG_CGROUP_DEVICE is not set
> CONFIG_CPUSETS=y
> CONFIG_PROC_PID_CPUSET=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_RESOURCE_COUNTERS=y
> # CONFIG_CGROUP_MEM_RES_CTLR is not set
> # CONFIG_SYSFS_DEPRECATED_V2 is not set
> CONFIG_RELAY=y
> CONFIG_NAMESPACES=y
> CONFIG_UTS_NS=y
> CONFIG_IPC_NS=y
> CONFIG_USER_NS=y
> CONFIG_PID_NS=y
> # CONFIG_NET_NS is not set
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> CONFIG_KALLSYMS_EXTRA_PASS=y
> CONFIG_STRIP_ASM_SYMS=y
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_PCI_QUIRKS=y
> CONFIG_SLUB_DEBUG=y
> # CONFIG_COMPAT_BRK is not set
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> # CONFIG_SLOB is not set
> CONFIG_PROFILING=y
> CONFIG_TRACEPOINTS=y
> CONFIG_MARKERS=y
> # CONFIG_OPROFILE is not set
> CONFIG_HAVE_OPROFILE=y
> CONFIG_KPROBES=y
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_KRETPROBES=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> # CONFIG_SLOW_WORK is not set
> CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_FORCE_LOAD is not set
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> # CONFIG_LBD is not set
> CONFIG_BLK_DEV_BSG=y
> # CONFIG_BLK_DEV_INTEGRITY is not set
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> CONFIG_PREEMPT_NOTIFIERS=y
> CONFIG_FREEZER=y
> 
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_SMP=y
> # CONFIG_SPARSE_IRQ is not set
> CONFIG_X86_MPPARSE=y
> # CONFIG_X86_BIGSMP is not set
> CONFIG_X86_EXTENDED_PLATFORM=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_RDC321X is not set
> # CONFIG_X86_32_NON_STANDARD is not set
> CONFIG_SCHED_OMIT_FRAME_POINTER=y
> CONFIG_PARAVIRT_GUEST=y
> # CONFIG_VMI is not set
> CONFIG_KVM_CLOCK=y
> CONFIG_KVM_GUEST=y
> CONFIG_LGUEST_GUEST=y
> CONFIG_PARAVIRT=y
> CONFIG_PARAVIRT_SPINLOCKS=y
> CONFIG_PARAVIRT_CLOCK=y
> # CONFIG_PARAVIRT_DEBUG is not set
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MPSC is not set
> CONFIG_MCORE2=y
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_GENERIC=y
> CONFIG_X86_CPU=y
> CONFIG_X86_L1_CACHE_BYTES=64
> CONFIG_X86_INTERNODE_CACHE_BYTES=64
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_XADD=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=4
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_CYRIX_32=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_CPU_SUP_TRANSMETA_32=y
> CONFIG_CPU_SUP_UMC_32=y
> # CONFIG_X86_DS is not set
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> # CONFIG_IOMMU_HELPER is not set
> # CONFIG_IOMMU_API is not set
> CONFIG_NR_CPUS=2
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> # CONFIG_X86_MCE is not set
> CONFIG_VM86=y
> # CONFIG_TOSHIBA is not set
> CONFIG_I8K=y
> CONFIG_X86_REBOOTFIXUPS=y
> CONFIG_MICROCODE=y
> CONFIG_MICROCODE_INTEL=y
> # CONFIG_MICROCODE_AMD is not set
> CONFIG_MICROCODE_OLD_INTERFACE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> # CONFIG_X86_CPU_DEBUG is not set
> # CONFIG_NOHIGHMEM is not set
> CONFIG_HIGHMEM4G=y
> # CONFIG_HIGHMEM64G is not set
> CONFIG_PAGE_OFFSET=0xC0000000
> CONFIG_HIGHMEM=y
> # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_SPARSEMEM_STATIC=y
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> # CONFIG_PHYS_ADDR_T_64BIT is not set
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_UNEVICTABLE_LRU=y
> CONFIG_HAVE_MLOCK=y
> CONFIG_HAVE_MLOCKED_PAGE_BIT=y
> CONFIG_MMU_NOTIFIER=y
> CONFIG_HIGHPTE=y
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> CONFIG_X86_RESERVE_LOW_64K=y
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> CONFIG_X86_PAT=y
> CONFIG_EFI=y
> CONFIG_SECCOMP=y
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> CONFIG_HZ_300=y
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=300
> CONFIG_SCHED_HRTICK=y
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> # CONFIG_KEXEC_JUMP is not set
> CONFIG_PHYSICAL_START=0x1000000
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=0x200000
> CONFIG_HOTPLUG_CPU=y
> # CONFIG_COMPAT_VDSO is not set
> # CONFIG_CMDLINE_BOOL is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> 
> #
> # Power management and ACPI options
> #
> CONFIG_PM=y
> CONFIG_PM_DEBUG=y
> # CONFIG_PM_VERBOSE is not set
> CONFIG_CAN_PM_TRACE=y
> CONFIG_PM_TRACE=y
> CONFIG_PM_TRACE_RTC=y
> CONFIG_PM_SLEEP_SMP=y
> CONFIG_PM_SLEEP=y
> CONFIG_SUSPEND=y
> # CONFIG_PM_TEST_SUSPEND is not set
> CONFIG_SUSPEND_FREEZER=y
> CONFIG_HIBERNATION=y
> CONFIG_PM_STD_PARTITION=""
> CONFIG_ACPI=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_PROCFS=y
> CONFIG_ACPI_PROCFS_POWER=y
> CONFIG_ACPI_SYSFS_POWER=y
> CONFIG_ACPI_PROC_EVENT=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> # CONFIG_ACPI_PCI_SLOT is not set
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> CONFIG_ACPI_SBS=y
> # CONFIG_APM is not set
> 
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_DEBUG=y
> CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_STAT_DETAILS=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> 
> #
> # CPUFreq processor drivers
> #
> CONFIG_X86_ACPI_CPUFREQ=y
> # CONFIG_X86_POWERNOW_K6 is not set
> # CONFIG_X86_POWERNOW_K7 is not set
> # CONFIG_X86_POWERNOW_K8 is not set
> # CONFIG_X86_GX_SUSPMOD is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> CONFIG_X86_SPEEDSTEP_ICH=y
> # CONFIG_X86_SPEEDSTEP_SMI is not set
> CONFIG_X86_P4_CLOCKMOD=y
> # CONFIG_X86_CPUFREQ_NFORCE2 is not set
> # CONFIG_X86_LONGRUN is not set
> # CONFIG_X86_LONGHAUL is not set
> # CONFIG_X86_E_POWERSAVER is not set
> 
> #
> # shared options
> #
> CONFIG_X86_SPEEDSTEP_LIB=y
> CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
> CONFIG_CPU_IDLE=y
> CONFIG_CPU_IDLE_GOV_LADDER=y
> CONFIG_CPU_IDLE_GOV_MENU=y
> 
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> # CONFIG_PCI_GOOLPC is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_DOMAINS=y
> # CONFIG_DMAR is not set
> CONFIG_PCIEPORTBUS=y
> # CONFIG_HOTPLUG_PCI_PCIE is not set
> CONFIG_PCIEAER=y
> # CONFIG_PCIEASPM is not set
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> # CONFIG_PCI_LEGACY is not set
> # CONFIG_PCI_DEBUG is not set
> # CONFIG_PCI_STUB is not set
> CONFIG_HT_IRQ=y
> # CONFIG_PCI_IOV is not set
> CONFIG_ISA_DMA_API=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> # CONFIG_OLPC is not set
> CONFIG_K8_NB=y
> CONFIG_PCCARD=y
> # CONFIG_PCMCIA_DEBUG is not set
> CONFIG_PCMCIA=y
> CONFIG_PCMCIA_LOAD_CIS=y
> CONFIG_PCMCIA_IOCTL=y
> CONFIG_CARDBUS=y
> 
> #
> # PC-card bridges
> #
> CONFIG_YENTA=y
> CONFIG_YENTA_O2=y
> CONFIG_YENTA_RICOH=y
> CONFIG_YENTA_TI=y
> CONFIG_YENTA_ENE_TUNE=y
> CONFIG_YENTA_TOSHIBA=y
> # CONFIG_PD6729 is not set
> CONFIG_I82092=y
> CONFIG_PCCARD_NONSTATIC=y
> CONFIG_HOTPLUG_PCI=y
> # CONFIG_HOTPLUG_PCI_FAKE is not set
> # CONFIG_HOTPLUG_PCI_IBM is not set
> # CONFIG_HOTPLUG_PCI_ACPI is not set
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> # CONFIG_HOTPLUG_PCI_SHPC is not set
> 
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> CONFIG_HAVE_AOUT=y
> # CONFIG_BINFMT_AOUT is not set
> CONFIG_BINFMT_MISC=y
> CONFIG_HAVE_ATOMIC_IOMAP=y
> CONFIG_NET=y
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_ASK_IP_FIB_HASH=y
> # CONFIG_IP_FIB_TRIE is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> CONFIG_IP_PNP_BOOTP=y
> CONFIG_IP_PNP_RARP=y
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> # CONFIG_INET_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_BEET is not set
> CONFIG_INET_LRO=y
> # CONFIG_INET_DIAG is not set
> CONFIG_TCP_CONG_ADVANCED=y
> # CONFIG_TCP_CONG_BIC is not set
> CONFIG_TCP_CONG_CUBIC=y
> # CONFIG_TCP_CONG_WESTWOOD is not set
> # CONFIG_TCP_CONG_HTCP is not set
> # CONFIG_TCP_CONG_HSTCP is not set
> # CONFIG_TCP_CONG_HYBLA is not set
> # CONFIG_TCP_CONG_VEGAS is not set
> # CONFIG_TCP_CONG_SCALABLE is not set
> # CONFIG_TCP_CONG_LP is not set
> # CONFIG_TCP_CONG_VENO is not set
> # CONFIG_TCP_CONG_YEAH is not set
> # CONFIG_TCP_CONG_ILLINOIS is not set
> # CONFIG_DEFAULT_BIC is not set
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_HTCP is not set
> # CONFIG_DEFAULT_VEGAS is not set
> # CONFIG_DEFAULT_WESTWOOD is not set
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> # CONFIG_IPV6 is not set
> # CONFIG_NETLABEL is not set
> CONFIG_NETWORK_SECMARK=y
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> # CONFIG_NETFILTER_ADVANCED is not set
> 
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=y
> CONFIG_NETFILTER_NETLINK_LOG=y
> CONFIG_NF_CONNTRACK=y
> CONFIG_NF_CONNTRACK_SECMARK=y
> CONFIG_NF_CONNTRACK_FTP=y
> CONFIG_NF_CONNTRACK_IRC=y
> CONFIG_NF_CONNTRACK_SIP=y
> CONFIG_NF_CT_NETLINK=y
> CONFIG_NETFILTER_XTABLES=y
> CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
> CONFIG_NETFILTER_XT_TARGET_MARK=y
> CONFIG_NETFILTER_XT_TARGET_NFLOG=y
> CONFIG_NETFILTER_XT_TARGET_SECMARK=y
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
> CONFIG_NETFILTER_XT_MATCH_MARK=y
> CONFIG_NETFILTER_XT_MATCH_STATE=y
> # CONFIG_IP_VS is not set
> 
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_DEFRAG_IPV4=y
> CONFIG_NF_CONNTRACK_IPV4=y
> CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> CONFIG_IP_NF_TARGET_LOG=y
> CONFIG_IP_NF_TARGET_ULOG=y
> CONFIG_NF_NAT=y
> CONFIG_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=y
> CONFIG_NF_NAT_FTP=y
> CONFIG_NF_NAT_IRC=y
> # CONFIG_NF_NAT_TFTP is not set
> # CONFIG_NF_NAT_AMANDA is not set
> # CONFIG_NF_NAT_PPTP is not set
> # CONFIG_NF_NAT_H323 is not set
> CONFIG_NF_NAT_SIP=y
> CONFIG_IP_NF_MANGLE=y
> # CONFIG_IP_DCCP is not set
> # CONFIG_IP_SCTP is not set
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_NET_DSA is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_PHONET is not set
> CONFIG_NET_SCHED=y
> 
> #
> # Queueing/Scheduling
> #
> # CONFIG_NET_SCH_CBQ is not set
> # CONFIG_NET_SCH_HTB is not set
> # CONFIG_NET_SCH_HFSC is not set
> # CONFIG_NET_SCH_PRIO is not set
> # CONFIG_NET_SCH_MULTIQ is not set
> # CONFIG_NET_SCH_RED is not set
> # CONFIG_NET_SCH_SFQ is not set
> # CONFIG_NET_SCH_TEQL is not set
> # CONFIG_NET_SCH_TBF is not set
> # CONFIG_NET_SCH_GRED is not set
> # CONFIG_NET_SCH_DSMARK is not set
> # CONFIG_NET_SCH_NETEM is not set
> # CONFIG_NET_SCH_DRR is not set
> # CONFIG_NET_SCH_INGRESS is not set
> 
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> # CONFIG_NET_CLS_BASIC is not set
> # CONFIG_NET_CLS_TCINDEX is not set
> # CONFIG_NET_CLS_ROUTE4 is not set
> # CONFIG_NET_CLS_FW is not set
> # CONFIG_NET_CLS_U32 is not set
> # CONFIG_NET_CLS_RSVP is not set
> # CONFIG_NET_CLS_RSVP6 is not set
> # CONFIG_NET_CLS_FLOW is not set
> # CONFIG_NET_CLS_CGROUP is not set
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> # CONFIG_NET_EMATCH_CMP is not set
> # CONFIG_NET_EMATCH_NBYTE is not set
> # CONFIG_NET_EMATCH_U32 is not set
> # CONFIG_NET_EMATCH_META is not set
> # CONFIG_NET_EMATCH_TEXT is not set
> CONFIG_NET_CLS_ACT=y
> # CONFIG_NET_ACT_POLICE is not set
> # CONFIG_NET_ACT_GACT is not set
> # CONFIG_NET_ACT_MIRRED is not set
> # CONFIG_NET_ACT_IPT is not set
> # CONFIG_NET_ACT_NAT is not set
> # CONFIG_NET_ACT_PEDIT is not set
> # CONFIG_NET_ACT_SIMP is not set
> # CONFIG_NET_ACT_SKBEDIT is not set
> CONFIG_NET_SCH_FIFO=y
> # CONFIG_DCB is not set
> 
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NET_TCPPROBE is not set
> # CONFIG_NET_DROP_MONITOR is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> CONFIG_BT=m
> CONFIG_BT_L2CAP=m
> CONFIG_BT_SCO=m
> CONFIG_BT_RFCOMM=m
> CONFIG_BT_RFCOMM_TTY=y
> CONFIG_BT_BNEP=m
> CONFIG_BT_BNEP_MC_FILTER=y
> CONFIG_BT_BNEP_PROTO_FILTER=y
> CONFIG_BT_HIDP=m
> 
> #
> # Bluetooth device drivers
> #
> CONFIG_BT_HCIBTUSB=m
> CONFIG_BT_HCIBTSDIO=m
> CONFIG_BT_HCIUART=m
> CONFIG_BT_HCIUART_H4=y
> CONFIG_BT_HCIUART_BCSP=y
> CONFIG_BT_HCIUART_LL=y
> CONFIG_BT_HCIBCM203X=m
> CONFIG_BT_HCIBPA10X=m
> CONFIG_BT_HCIBFUSB=m
> CONFIG_BT_HCIDTL1=m
> CONFIG_BT_HCIBT3C=m
> CONFIG_BT_HCIBLUECARD=m
> CONFIG_BT_HCIBTUART=m
> CONFIG_BT_HCIVHCI=m
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> CONFIG_CFG80211=y
> CONFIG_CFG80211_REG_DEBUG=y
> CONFIG_WIRELESS_OLD_REGULATORY=y
> CONFIG_WIRELESS_EXT=y
> CONFIG_WIRELESS_EXT_SYSFS=y
> CONFIG_LIB80211=y
> CONFIG_LIB80211_CRYPT_WEP=m
> CONFIG_LIB80211_CRYPT_CCMP=m
> CONFIG_LIB80211_CRYPT_TKIP=m
> CONFIG_LIB80211_DEBUG=y
> CONFIG_MAC80211=y
> 
> #
> # Rate control algorithm selection
> #
> CONFIG_MAC80211_RC_MINSTREL=y
> # CONFIG_MAC80211_RC_DEFAULT_PID is not set
> CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT="minstrel"
> CONFIG_MAC80211_MESH=y
> CONFIG_MAC80211_LEDS=y
> CONFIG_MAC80211_DEBUGFS=y
> # CONFIG_MAC80211_DEBUG_MENU is not set
> # CONFIG_WIMAX is not set
> CONFIG_RFKILL=m
> CONFIG_RFKILL_INPUT=m
> CONFIG_RFKILL_LEDS=y
> # CONFIG_NET_9P is not set
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> CONFIG_FIRMWARE_IN_KERNEL=y
> CONFIG_EXTRA_FIRMWARE=""
> # CONFIG_DEBUG_DRIVER is not set
> CONFIG_DEBUG_DEVRES=y
> # CONFIG_SYS_HYPERVISOR is not set
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
> # CONFIG_MTD is not set
> # CONFIG_PARPORT is not set
> CONFIG_PNP=y
> CONFIG_PNP_DEBUG_MESSAGES=y
> 
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> # CONFIG_BLK_DEV_XIP is not set
> CONFIG_CDROM_PKTCDVD=m
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> # CONFIG_ATA_OVER_ETH is not set
> # CONFIG_VIRTIO_BLK is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_MISC_DEVICES=y
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_SGI_IOC4 is not set
> CONFIG_TIFM_CORE=y
> CONFIG_TIFM_7XX1=y
> # CONFIG_ICS932S401 is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_HP_ILO is not set
> CONFIG_DELL_LAPTOP=m
> # CONFIG_ISL29003 is not set
> # CONFIG_C2PORT is not set
> 
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> # CONFIG_EEPROM_AT25 is not set
> # CONFIG_EEPROM_LEGACY is not set
> # CONFIG_EEPROM_93CX6 is not set
> CONFIG_HAVE_IDE=y
> # CONFIG_IDE is not set
> 
> #
> # SCSI device support
> #
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> # CONFIG_SCSI_TGT is not set
> # CONFIG_SCSI_NETLINK is not set
> CONFIG_SCSI_PROC_FS=y
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=y
> # CONFIG_CHR_DEV_SCH is not set
> 
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_LOGGING is not set
> # CONFIG_SCSI_SCAN_ASYNC is not set
> CONFIG_SCSI_WAIT_SCAN=m
> 
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=y
> # CONFIG_SCSI_FC_ATTRS is not set
> CONFIG_SCSI_ISCSI_ATTRS=y
> # CONFIG_SCSI_SAS_ATTRS is not set
> # CONFIG_SCSI_SAS_LIBSAS is not set
> # CONFIG_SCSI_SRP_ATTRS is not set
> # CONFIG_SCSI_LOWLEVEL is not set
> # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
> # CONFIG_SCSI_DH is not set
> # CONFIG_SCSI_OSD_INITIATOR is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
> CONFIG_SATA_AHCI=y
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
> # CONFIG_SATA_SVW is not set
> CONFIG_ATA_PIIX=y
> # CONFIG_SATA_MV is not set
> # CONFIG_SATA_NV is not set
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SX4 is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_PATA_ACPI is not set
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CS5535 is not set
> # CONFIG_PATA_CS5536 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> CONFIG_ATA_GENERIC=y
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_MARVELL is not set
> CONFIG_PATA_MPIIX=y
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PCMCIA is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RZ1000 is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> CONFIG_PATA_SCH=y
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_AUTODETECT=y
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID10 is not set
> # CONFIG_MD_RAID456 is not set
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> CONFIG_BLK_DEV_DM=y
> # CONFIG_DM_DEBUG is not set
> # CONFIG_DM_CRYPT is not set
> # CONFIG_DM_SNAPSHOT is not set
> CONFIG_DM_MIRROR=y
> CONFIG_DM_ZERO=y
> # CONFIG_DM_MULTIPATH is not set
> # CONFIG_DM_DELAY is not set
> # CONFIG_DM_UEVENT is not set
> # CONFIG_FUSION is not set
> 
> #
> # IEEE 1394 (FireWire) support
> #
> 
> #
> # Enable only one of the two stacks, unless you know what you are doing
> #
> CONFIG_FIREWIRE=m
> CONFIG_FIREWIRE_OHCI=m
> CONFIG_FIREWIRE_OHCI_DEBUG=y
> CONFIG_FIREWIRE_SBP2=m
> CONFIG_IEEE1394=m
> CONFIG_IEEE1394_OHCI1394=m
> # CONFIG_IEEE1394_PCILYNX is not set
> CONFIG_IEEE1394_SBP2=m
> # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
> # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
> # CONFIG_IEEE1394_ETH1394 is not set
> # CONFIG_IEEE1394_RAWIO is not set
> # CONFIG_IEEE1394_VIDEO1394 is not set
> # CONFIG_IEEE1394_DV1394 is not set
> # CONFIG_IEEE1394_VERBOSEDEBUG is not set
> # CONFIG_I2O is not set
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_COMPAT_NET_DEV_OPS=y
> # CONFIG_IFB is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_MACVLAN is not set
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=m
> # CONFIG_VETH is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_ARCNET is not set
> CONFIG_PHYLIB=y
> 
> #
> # MII PHY device drivers
> #
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_QSEMI_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_CICADA_PHY is not set
> # CONFIG_VITESSE_PHY is not set
> # CONFIG_SMSC_PHY is not set
> CONFIG_BROADCOM_PHY=y
> # CONFIG_ICPLUS_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_NATIONAL_PHY is not set
> CONFIG_STE10XP=m
> # CONFIG_LSI_ET1011C_PHY is not set
> # CONFIG_FIXED_PHY is not set
> # CONFIG_MDIO_BITBANG is not set
> # CONFIG_NET_ETHERNET is not set
> CONFIG_NETDEV_1000=y
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_E1000E is not set
> # CONFIG_IP1000 is not set
> # CONFIG_IGB is not set
> # CONFIG_IGBVF is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> CONFIG_SKY2=y
> # CONFIG_SKY2_DEBUG is not set
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_TIGON3=y
> CONFIG_BNX2=y
> # CONFIG_QLA3XXX is not set
> # CONFIG_ATL1 is not set
> # CONFIG_ATL1E is not set
> # CONFIG_ATL1C is not set
> # CONFIG_JME is not set
> # CONFIG_NETDEV_10000 is not set
> # CONFIG_TR is not set
> 
> #
> # Wireless LAN
> #
> # CONFIG_WLAN_PRE80211 is not set
> CONFIG_WLAN_80211=y
> # CONFIG_PCMCIA_RAYCS is not set
> # CONFIG_LIBERTAS is not set
> # CONFIG_LIBERTAS_THINFIRM is not set
> # CONFIG_AIRO is not set
> # CONFIG_ATMEL is not set
> # CONFIG_AT76C50X_USB is not set
> # CONFIG_AIRO_CS is not set
> # CONFIG_PCMCIA_WL3501 is not set
> # CONFIG_PRISM54 is not set
> # CONFIG_USB_ZD1201 is not set
> # CONFIG_USB_NET_RNDIS_WLAN is not set
> # CONFIG_RTL8180 is not set
> # CONFIG_RTL8187 is not set
> # CONFIG_ADM8211 is not set
> # CONFIG_MAC80211_HWSIM is not set
> # CONFIG_MWL8K is not set
> # CONFIG_P54_COMMON is not set
> # CONFIG_ATH5K is not set
> # CONFIG_ATH9K is not set
> # CONFIG_AR9170_USB is not set
> # CONFIG_IPW2100 is not set
> # CONFIG_IPW2200 is not set
> # CONFIG_IWLWIFI is not set
> CONFIG_HOSTAP=m
> # CONFIG_HOSTAP_FIRMWARE is not set
> # CONFIG_HOSTAP_PLX is not set
> # CONFIG_HOSTAP_PCI is not set
> # CONFIG_HOSTAP_CS is not set
> # CONFIG_B43 is not set
> # CONFIG_B43LEGACY is not set
> # CONFIG_ZD1211RW is not set
> # CONFIG_RT2X00 is not set
> # CONFIG_HERMES is not set
> 
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
> 
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> # CONFIG_USB_HSO is not set
> CONFIG_NET_PCMCIA=y
> # CONFIG_PCMCIA_3C589 is not set
> # CONFIG_PCMCIA_3C574 is not set
> # CONFIG_PCMCIA_FMVJ18X is not set
> # CONFIG_PCMCIA_PCNET is not set
> # CONFIG_PCMCIA_NMCLAN is not set
> # CONFIG_PCMCIA_SMC91C92 is not set
> # CONFIG_PCMCIA_XIRC2PS is not set
> # CONFIG_PCMCIA_AXNET is not set
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> CONFIG_PPP=y
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=y
> CONFIG_PPP_SYNC_TTY=y
> CONFIG_PPP_DEFLATE=y
> CONFIG_PPP_BSDCOMP=y
> CONFIG_PPP_MPPE=y
> CONFIG_PPPOE=y
> CONFIG_PPPOL2TP=y
> CONFIG_SLIP=y
> CONFIG_SLIP_COMPRESSED=y
> CONFIG_SLHC=y
> CONFIG_SLIP_SMART=y
> CONFIG_SLIP_MODE_SLIP6=y
> # CONFIG_NET_FC is not set
> CONFIG_NETCONSOLE=y
> CONFIG_NETCONSOLE_DYNAMIC=y
> CONFIG_NETPOLL=y
> CONFIG_NETPOLL_TRAP=y
> CONFIG_NET_POLL_CONTROLLER=y
> # CONFIG_VIRTIO_NET is not set
> # CONFIG_ISDN is not set
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> CONFIG_INPUT_FF_MEMLESS=y
> CONFIG_INPUT_POLLDEV=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_GPIO is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_ELANTECH is not set
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_BCM5974 is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_MOUSE_GPIO is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=m
> # CONFIG_INPUT_APANEL is not set
> CONFIG_INPUT_WISTRON_BTNS=m
> # CONFIG_INPUT_ATLAS_BTNS is not set
> # CONFIG_INPUT_ATI_REMOTE is not set
> # CONFIG_INPUT_ATI_REMOTE2 is not set
> # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> # CONFIG_INPUT_POWERMATE is not set
> # CONFIG_INPUT_YEALINK is not set
> # CONFIG_INPUT_CM109 is not set
> # CONFIG_INPUT_UINPUT is not set
> # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
> 
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_DEVKMEM=y
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_COMPUTONE is not set
> # CONFIG_ROCKETPORT is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_DIGIEPCA is not set
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_ISI is not set
> # CONFIG_SYNCLINK is not set
> # CONFIG_SYNCLINKMP is not set
> # CONFIG_SYNCLINK_GT is not set
> # CONFIG_N_HDLC is not set
> # CONFIG_RISCOM8 is not set
> # CONFIG_SPECIALIX is not set
> # CONFIG_SX is not set
> # CONFIG_RIO is not set
> # CONFIG_STALDRV is not set
> # CONFIG_NOZOMI is not set
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> # CONFIG_SERIAL_8250_CS is not set
> CONFIG_SERIAL_8250_NR_UARTS=32
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
> 
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_MAX3100 is not set
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> # CONFIG_LEGACY_PTYS is not set
> CONFIG_HVC_DRIVER=y
> CONFIG_VIRTIO_CONSOLE=y
> # CONFIG_IPMI_HANDLER is not set
> CONFIG_HW_RANDOM=y
> # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> CONFIG_HW_RANDOM_INTEL=y
> # CONFIG_HW_RANDOM_AMD is not set
> # CONFIG_HW_RANDOM_GEODE is not set
> # CONFIG_HW_RANDOM_VIA is not set
> # CONFIG_HW_RANDOM_VIRTIO is not set
> CONFIG_NVRAM=y
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> 
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> # CONFIG_CARDMAN_4000 is not set
> # CONFIG_CARDMAN_4040 is not set
> # CONFIG_IPWIRELESS is not set
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> # CONFIG_NSC_GPIO is not set
> # CONFIG_CS5535_GPIO is not set
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HPET=y
> CONFIG_HPET_MMAP=y
> CONFIG_HANGCHECK_TIMER=y
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> CONFIG_I2C=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_ALGOBIT=y
> 
> #
> # I2C Hardware Bus support
> #
> 
> #
> # PC SMBus host controller drivers
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> CONFIG_I2C_I801=y
> CONFIG_I2C_ISCH=y
> CONFIG_I2C_PIIX4=y
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
> 
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_GPIO is not set
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_SIMTEC is not set
> 
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_TINY_USB is not set
> 
> #
> # Graphics adapter I2C/DDC channel drivers
> #
> # CONFIG_I2C_VOODOO3 is not set
> 
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_PCA_PLATFORM is not set
> # CONFIG_I2C_STUB is not set
> # CONFIG_SCx200_ACB is not set
> 
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_DS1682 is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_PCF8575 is not set
> # CONFIG_SENSORS_PCA9539 is not set
> # CONFIG_SENSORS_MAX6875 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> CONFIG_SPI=y
> # CONFIG_SPI_DEBUG is not set
> CONFIG_SPI_MASTER=y
> 
> #
> # SPI Master Controller Drivers
> #
> # CONFIG_SPI_BITBANG is not set
> # CONFIG_SPI_GPIO is not set
> 
> #
> # SPI Protocol Masters
> #
> # CONFIG_SPI_SPIDEV is not set
> # CONFIG_SPI_TLE62X0 is not set
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> CONFIG_GPIOLIB=y
> # CONFIG_DEBUG_GPIO is not set
> CONFIG_GPIO_SYSFS=y
> 
> #
> # Memory mapped GPIO expanders:
> #
> 
> #
> # I2C GPIO expanders:
> #
> # CONFIG_GPIO_MAX732X is not set
> # CONFIG_GPIO_PCA953X is not set
> # CONFIG_GPIO_PCF857X is not set
> 
> #
> # PCI GPIO expanders:
> #
> # CONFIG_GPIO_BT8XX is not set
> 
> #
> # SPI GPIO expanders:
> #
> # CONFIG_GPIO_MAX7301 is not set
> # CONFIG_GPIO_MCP23S08 is not set
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_BATTERY_DS2760 is not set
> # CONFIG_BATTERY_BQ27x00 is not set
> CONFIG_HWMON=y
> # CONFIG_HWMON_VID is not set
> # CONFIG_SENSORS_ABITUGURU is not set
> # CONFIG_SENSORS_ABITUGURU3 is not set
> # CONFIG_SENSORS_AD7414 is not set
> # CONFIG_SENSORS_AD7418 is not set
> # CONFIG_SENSORS_ADCXX is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1029 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ADT7462 is not set
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7473 is not set
> # CONFIG_SENSORS_ADT7475 is not set
> # CONFIG_SENSORS_K8TEMP is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATK0110 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_I5K_AMB is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> # CONFIG_SENSORS_F75375S is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_FSCHMD is not set
> # CONFIG_SENSORS_G760A is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> CONFIG_SENSORS_CORETEMP=y
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM70 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_LM93 is not set
> # CONFIG_SENSORS_LTC4215 is not set
> # CONFIG_SENSORS_LTC4245 is not set
> # CONFIG_SENSORS_LM95241 is not set
> # CONFIG_SENSORS_MAX1111 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX6650 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_PC87427 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_SHT15 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_DME1737 is not set
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47M192 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83791D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83793 is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83L786NG is not set
> # CONFIG_SENSORS_W83627HF is not set
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_SENSORS_LIS3LV02D is not set
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> CONFIG_THERMAL=y
> # CONFIG_THERMAL_HWMON is not set
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
> 
> #
> # Watchdog Device Drivers
> #
> # CONFIG_SOFT_WATCHDOG is not set
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> # CONFIG_ALIM1535_WDT is not set
> # CONFIG_ALIM7101_WDT is not set
> # CONFIG_SC520_WDT is not set
> # CONFIG_EUROTECH_WDT is not set
> # CONFIG_IB700_WDT is not set
> # CONFIG_IBMASR is not set
> # CONFIG_WAFER_WDT is not set
> CONFIG_I6300ESB_WDT=y
> CONFIG_ITCO_WDT=y
> CONFIG_ITCO_VENDOR_SUPPORT=y
> # CONFIG_IT8712F_WDT is not set
> # CONFIG_IT87_WDT is not set
> # CONFIG_HP_WATCHDOG is not set
> # CONFIG_SC1200_WDT is not set
> # CONFIG_PC87413_WDT is not set
> # CONFIG_60XX_WDT is not set
> # CONFIG_SBC8360_WDT is not set
> # CONFIG_SBC7240_WDT is not set
> # CONFIG_CPU5_WDT is not set
> # CONFIG_SMSC_SCH311X_WDT is not set
> # CONFIG_SMSC37B787_WDT is not set
> # CONFIG_W83627HF_WDT is not set
> # CONFIG_W83697HF_WDT is not set
> # CONFIG_W83697UG_WDT is not set
> # CONFIG_W83877F_WDT is not set
> # CONFIG_W83977F_WDT is not set
> # CONFIG_MACHZ_WDT is not set
> # CONFIG_SBC_EPX_C3_WATCHDOG is not set
> 
> #
> # PCI-based Watchdog Cards
> #
> # CONFIG_PCIPCWATCHDOG is not set
> # CONFIG_WDTPCI is not set
> 
> #
> # USB-based Watchdog Cards
> #
> # CONFIG_USBPCWATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
> 
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB=y
> CONFIG_SSB_SPROM=y
> CONFIG_SSB_PCIHOST_POSSIBLE=y
> CONFIG_SSB_PCIHOST=y
> # CONFIG_SSB_B43_PCI_BRIDGE is not set
> CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
> CONFIG_SSB_PCMCIAHOST=y
> # CONFIG_SSB_DEBUG is not set
> CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
> CONFIG_SSB_DRIVER_PCICORE=y
> 
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_CORE is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_UCB1400_CORE is not set
> # CONFIG_TPS65010 is not set
> # CONFIG_TWL4030_CORE is not set
> # CONFIG_MFD_TMIO is not set
> # CONFIG_PMIC_DA903X is not set
> # CONFIG_MFD_WM8400 is not set
> # CONFIG_MFD_WM8350_I2C is not set
> # CONFIG_MFD_PCF50633 is not set
> CONFIG_REGULATOR=y
> # CONFIG_REGULATOR_DEBUG is not set
> # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
> # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
> # CONFIG_REGULATOR_BQ24022 is not set
> 
> #
> # Multimedia devices
> #
> 
> #
> # Multimedia core support
> #
> # CONFIG_VIDEO_DEV is not set
> # CONFIG_DVB_CORE is not set
> # CONFIG_VIDEO_MEDIA is not set
> 
> #
> # Multimedia drivers
> #
> # CONFIG_DAB is not set
> 
> #
> # Graphics support
> #
> CONFIG_AGP=y
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_EFFICEON is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> CONFIG_DRM_I915=y
> # CONFIG_DRM_I915_KMS is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> CONFIG_VGASTATE=m
> CONFIG_VIDEO_OUTPUT_CONTROL=y
> CONFIG_FB=y
> # CONFIG_FIRMWARE_EDID is not set
> CONFIG_FB_DDC=m
> CONFIG_FB_BOOT_VESA_SUPPORT=y
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> # CONFIG_FB_SYS_FILLRECT is not set
> # CONFIG_FB_SYS_COPYAREA is not set
> # CONFIG_FB_SYS_IMAGEBLIT is not set
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> # CONFIG_FB_SYS_FOPS is not set
> # CONFIG_FB_SVGALIB is not set
> # CONFIG_FB_MACMODES is not set
> # CONFIG_FB_BACKLIGHT is not set
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
> 
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_UVESA is not set
> CONFIG_FB_VESA=y
> # CONFIG_FB_EFI is not set
> # CONFIG_FB_N411 is not set
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> CONFIG_FB_I810=m
> CONFIG_FB_I810_GTF=y
> CONFIG_FB_I810_I2C=y
> # CONFIG_FB_LE80578 is not set
> CONFIG_FB_INTEL=m
> CONFIG_FB_INTEL_DEBUG=y
> CONFIG_FB_INTEL_I2C=y
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_VIA is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CARMINE is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_VIRTUAL is not set
> # CONFIG_FB_METRONOME is not set
> # CONFIG_FB_MB862XX is not set
> # CONFIG_FB_BROADSHEET is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_LCD_CLASS_DEVICE=y
> CONFIG_LCD_LTV350QV=y
> CONFIG_LCD_ILI9320=y
> CONFIG_LCD_TDO24M=y
> CONFIG_LCD_VGG2432A4=y
> CONFIG_LCD_PLATFORM=y
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> CONFIG_BACKLIGHT_GENERIC=y
> CONFIG_BACKLIGHT_PROGEAR=y
> # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
> # CONFIG_BACKLIGHT_SAHARA is not set
> 
> #
> # Display device support
> #
> # CONFIG_DISPLAY_SUPPORT is not set
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> # CONFIG_LOGO is not set
> CONFIG_SOUND=y
> CONFIG_SOUND_OSS_CORE=y
> CONFIG_SND=y
> CONFIG_SND_TIMER=m
> CONFIG_SND_PCM=m
> CONFIG_SND_HWDEP=m
> CONFIG_SND_JACK=y
> CONFIG_SND_SEQUENCER=m
> CONFIG_SND_SEQ_DUMMY=m
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> # CONFIG_SND_HRTIMER is not set
> CONFIG_SND_DYNAMIC_MINORS=y
> CONFIG_SND_SUPPORT_OLD_API=y
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> CONFIG_SND_VMASTER=y
> CONFIG_SND_AC97_CODEC=m
> CONFIG_SND_DRIVERS=y
> # CONFIG_SND_PCSP is not set
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> # CONFIG_SND_AC97_POWER_SAVE is not set
> CONFIG_SND_PCI=y
> # CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALS300 is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AW2 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CA0106 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_OXYGEN is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS5530 is not set
> # CONFIG_SND_CS5535AUDIO is not set
> # CONFIG_SND_DARLA20 is not set
> # CONFIG_SND_GINA20 is not set
> # CONFIG_SND_LAYLA20 is not set
> # CONFIG_SND_DARLA24 is not set
> # CONFIG_SND_GINA24 is not set
> # CONFIG_SND_LAYLA24 is not set
> # CONFIG_SND_MONA is not set
> # CONFIG_SND_MIA is not set
> # CONFIG_SND_ECHO3G is not set
> # CONFIG_SND_INDIGO is not set
> # CONFIG_SND_INDIGOIO is not set
> # CONFIG_SND_INDIGODJ is not set
> # CONFIG_SND_INDIGOIOX is not set
> # CONFIG_SND_INDIGODJX is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_FM801 is not set
> CONFIG_SND_HDA_INTEL=m
> CONFIG_SND_HDA_HWDEP=y
> # CONFIG_SND_HDA_RECONFIG is not set
> # CONFIG_SND_HDA_INPUT_BEEP is not set
> CONFIG_SND_HDA_CODEC_REALTEK=y
> CONFIG_SND_HDA_CODEC_ANALOG=y
> CONFIG_SND_HDA_CODEC_SIGMATEL=y
> CONFIG_SND_HDA_CODEC_VIA=y
> CONFIG_SND_HDA_CODEC_ATIHDMI=y
> CONFIG_SND_HDA_CODEC_NVHDMI=y
> CONFIG_SND_HDA_CODEC_INTELHDMI=y
> CONFIG_SND_HDA_ELD=y
> CONFIG_SND_HDA_CODEC_CONEXANT=y
> CONFIG_SND_HDA_CODEC_CMEDIA=y
> CONFIG_SND_HDA_CODEC_SI3054=y
> CONFIG_SND_HDA_GENERIC=y
> CONFIG_SND_HDA_POWER_SAVE=y
> CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_HDSPM is not set
> # CONFIG_SND_HIFIER is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> CONFIG_SND_INTEL8X0=m
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_PCXHR is not set
> # CONFIG_SND_RIPTIDE is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SIS7019 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VIRTUOSO is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_SPI is not set
> # CONFIG_SND_USB is not set
> # CONFIG_SND_PCMCIA is not set
> # CONFIG_SND_SOC is not set
> # CONFIG_SOUND_PRIME is not set
> CONFIG_AC97_BUS=m
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> CONFIG_HID_DEBUG=y
> CONFIG_HIDRAW=y
> 
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_HID_PID=y
> CONFIG_USB_HIDDEV=y
> 
> #
> # Special HID drivers
> #
> CONFIG_HID_A4TECH=y
> CONFIG_HID_APPLE=y
> CONFIG_HID_BELKIN=y
> CONFIG_HID_CHERRY=y
> CONFIG_HID_CHICONY=y
> CONFIG_HID_CYPRESS=y
> # CONFIG_DRAGONRISE_FF is not set
> CONFIG_HID_EZKEY=y
> CONFIG_HID_KYE=y
> CONFIG_HID_GYRATION=y
> CONFIG_HID_KENSINGTON=y
> CONFIG_HID_LOGITECH=y
> CONFIG_LOGITECH_FF=y
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> CONFIG_HID_MICROSOFT=y
> CONFIG_HID_MONTEREY=y
> CONFIG_HID_NTRIG=y
> CONFIG_HID_PANTHERLORD=y
> # CONFIG_PANTHERLORD_FF is not set
> CONFIG_HID_PETALYNX=y
> CONFIG_HID_SAMSUNG=y
> CONFIG_HID_SONY=y
> CONFIG_HID_SUNPLUS=y
> # CONFIG_GREENASIA_FF is not set
> CONFIG_HID_TOPSEED=y
> # CONFIG_THRUSTMASTER_FF is not set
> # CONFIG_ZEROPLUS_FF is not set
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> 
> #
> # Miscellaneous USB options
> #
> # CONFIG_USB_DEVICEFS is not set
> # CONFIG_USB_DEVICE_CLASS is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> CONFIG_USB_SUSPEND=y
> # CONFIG_USB_OTG is not set
> # CONFIG_USB_MON is not set
> # CONFIG_USB_WUSB is not set
> # CONFIG_USB_WUSB_CBAF is not set
> 
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_EHCI_HCD=y
> # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> # CONFIG_USB_EHCI_TT_NEWSCHED is not set
> # CONFIG_USB_OXU210HP_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_ISP1760_HCD is not set
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
> # CONFIG_USB_WHCI_HCD is not set
> # CONFIG_USB_HWA_HCD is not set
> 
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
> 
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
> 
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_STORAGE_ONETOUCH is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> CONFIG_USB_LIBUSUAL=y
> 
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> 
> #
> # USB port drivers
> #
> # CONFIG_USB_SERIAL is not set
> 
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_BERRY_CHARGE is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_VST is not set
> # CONFIG_USB_GADGET is not set
> 
> #
> # OTG and related infrastructure
> #
> # CONFIG_USB_GPIO_VBUS is not set
> # CONFIG_NOP_USB_XCEIV is not set
> # CONFIG_UWB is not set
> CONFIG_MMC=y
> # CONFIG_MMC_DEBUG is not set
> # CONFIG_MMC_UNSAFE_RESUME is not set
> 
> #
> # MMC/SD/SDIO Card Drivers
> #
> CONFIG_MMC_BLOCK=y
> CONFIG_MMC_BLOCK_BOUNCE=y
> # CONFIG_SDIO_UART is not set
> CONFIG_MMC_TEST=y
> 
> #
> # MMC/SD/SDIO Host Controller Drivers
> #
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_PCI=y
> # CONFIG_MMC_RICOH_MMC is not set
> CONFIG_MMC_WBSD=y
> CONFIG_MMC_TIFM_SD=y
> CONFIG_MMC_SDRICOH_CS=y
> # CONFIG_MEMSTICK is not set
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
> 
> #
> # LED drivers
> #
> # CONFIG_LEDS_ALIX2 is not set
> # CONFIG_LEDS_PCA9532 is not set
> # CONFIG_LEDS_GPIO is not set
> # CONFIG_LEDS_LP5521 is not set
> # CONFIG_LEDS_CLEVO_MAIL is not set
> # CONFIG_LEDS_PCA955X is not set
> # CONFIG_LEDS_DAC124S085 is not set
> # CONFIG_LEDS_BD2802 is not set
> 
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGERS=y
> # CONFIG_LEDS_TRIGGER_TIMER is not set
> # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
> # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> # CONFIG_LEDS_TRIGGER_GPIO is not set
> # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
> 
> #
> # iptables trigger is under Netfilter config (LED target)
> #
> # CONFIG_ACCESSIBILITY is not set
> # CONFIG_INFINIBAND is not set
> CONFIG_EDAC=y
> 
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> # CONFIG_EDAC_MM_EDAC is not set
> CONFIG_RTC_LIB=y
> CONFIG_RTC_CLASS=y
> # CONFIG_RTC_HCTOSYS is not set
> # CONFIG_RTC_DEBUG is not set
> 
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> CONFIG_RTC_INTF_PROC=y
> CONFIG_RTC_INTF_DEV=y
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> # CONFIG_RTC_DRV_TEST is not set
> 
> #
> # I2C RTC drivers
> #
> # CONFIG_RTC_DRV_DS1307 is not set
> # CONFIG_RTC_DRV_DS1374 is not set
> # CONFIG_RTC_DRV_DS1672 is not set
> # CONFIG_RTC_DRV_MAX6900 is not set
> # CONFIG_RTC_DRV_RS5C372 is not set
> # CONFIG_RTC_DRV_ISL1208 is not set
> # CONFIG_RTC_DRV_X1205 is not set
> # CONFIG_RTC_DRV_PCF8563 is not set
> # CONFIG_RTC_DRV_PCF8583 is not set
> # CONFIG_RTC_DRV_M41T80 is not set
> # CONFIG_RTC_DRV_S35390A is not set
> # CONFIG_RTC_DRV_FM3130 is not set
> # CONFIG_RTC_DRV_RX8581 is not set
> 
> #
> # SPI RTC drivers
> #
> # CONFIG_RTC_DRV_M41T94 is not set
> # CONFIG_RTC_DRV_DS1305 is not set
> # CONFIG_RTC_DRV_DS1390 is not set
> # CONFIG_RTC_DRV_MAX6902 is not set
> # CONFIG_RTC_DRV_R9701 is not set
> # CONFIG_RTC_DRV_RS5C348 is not set
> # CONFIG_RTC_DRV_DS3234 is not set
> 
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=y
> # CONFIG_RTC_DRV_DS1286 is not set
> # CONFIG_RTC_DRV_DS1511 is not set
> # CONFIG_RTC_DRV_DS1553 is not set
> # CONFIG_RTC_DRV_DS1742 is not set
> # CONFIG_RTC_DRV_STK17TA8 is not set
> # CONFIG_RTC_DRV_M48T86 is not set
> # CONFIG_RTC_DRV_M48T35 is not set
> # CONFIG_RTC_DRV_M48T59 is not set
> # CONFIG_RTC_DRV_BQ4802 is not set
> # CONFIG_RTC_DRV_V3020 is not set
> 
> #
> # on-CPU RTC drivers
> #
> CONFIG_DMADEVICES=y
> 
> #
> # DMA Devices
> #
> # CONFIG_INTEL_IOATDMA is not set
> # CONFIG_AUXDISPLAY is not set
> # CONFIG_UIO is not set
> CONFIG_STAGING=y
> # CONFIG_STAGING_EXCLUDE_BUILD is not set
> # CONFIG_ET131X is not set
> # CONFIG_SLICOSS is not set
> # CONFIG_ME4000 is not set
> # CONFIG_MEILHAUS is not set
> # CONFIG_USB_IP_COMMON is not set
> # CONFIG_W35UND is not set
> # CONFIG_PRISM2_USB is not set
> # CONFIG_ECHO is not set
> # CONFIG_USB_ATMEL is not set
> # CONFIG_AGNX is not set
> # CONFIG_OTUS is not set
> # CONFIG_RT2860 is not set
> # CONFIG_RT2870 is not set
> # CONFIG_RT3070 is not set
> # CONFIG_COMEDI is not set
> # CONFIG_ASUS_OLED is not set
> # CONFIG_ALTERA_PCIE_CHDMA is not set
> # CONFIG_RTL8187SE is not set
> # CONFIG_INPUT_MIMIO is not set
> # CONFIG_TRANZPORT is not set
> # CONFIG_EPL is not set
> 
> #
> # Android
> #
> # CONFIG_ANDROID is not set
> # CONFIG_ANDROID_BINDER_IPC is not set
> # CONFIG_ANDROID_LOGGER is not set
> # CONFIG_ANDROID_RAM_CONSOLE is not set
> # CONFIG_ANDROID_TIMED_GPIO is not set
> # CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
> # CONFIG_DST is not set
> # CONFIG_POHMELFS is not set
> # CONFIG_STLC45XX is not set
> # CONFIG_B3DFG is not set
> # CONFIG_IDE_PHISON is not set
> # CONFIG_PLAN9AUTH is not set
> # CONFIG_HECI is not set
> # CONFIG_LINE6_USB is not set
> CONFIG_X86_PLATFORM_DEVICES=y
> # CONFIG_ACER_WMI is not set
> # CONFIG_ASUS_LAPTOP is not set
> CONFIG_DELL_WMI=m
> # CONFIG_FUJITSU_LAPTOP is not set
> # CONFIG_TC1100_WMI is not set
> # CONFIG_HP_WMI is not set
> # CONFIG_MSI_LAPTOP is not set
> # CONFIG_PANASONIC_LAPTOP is not set
> # CONFIG_COMPAL_LAPTOP is not set
> # CONFIG_SONY_LAPTOP is not set
> # CONFIG_THINKPAD_ACPI is not set
> # CONFIG_INTEL_MENLOW is not set
> # CONFIG_EEEPC_LAPTOP is not set
> CONFIG_ACPI_WMI=m
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> 
> #
> # Firmware Drivers
> #
> CONFIG_EDD=y
> # CONFIG_EDD_OFF is not set
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_EFI_VARS=y
> CONFIG_DELL_RBU=y
> CONFIG_DCDBAS=y
> CONFIG_DMIID=y
> # CONFIG_ISCSI_IBFT_FIND is not set
> 
> #
> # File systems
> #
> CONFIG_EXT2_FS=m
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> # CONFIG_EXT4_FS is not set
> CONFIG_FS_XIP=y
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_FILE_LOCKING=y
> CONFIG_XFS_FS=m
> CONFIG_XFS_QUOTA=y
> CONFIG_XFS_POSIX_ACL=y
> CONFIG_XFS_RT=y
> # CONFIG_XFS_DEBUG is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_QUOTA=y
> CONFIG_QUOTA_NETLINK_INTERFACE=y
> # CONFIG_PRINT_QUOTA_WARNING is not set
> CONFIG_QUOTA_TREE=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> CONFIG_QUOTACTL=y
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> # CONFIG_FUSE_FS is not set
> CONFIG_GENERIC_ACL=y
> 
> #
> # Caches
> #
> # CONFIG_FSCACHE is not set
> 
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_UDF_FS=m
> CONFIG_UDF_NLS=y
> 
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> # CONFIG_NTFS_FS is not set
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_VMCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_CONFIGFS_FS=y
> CONFIG_MISC_FILESYSTEMS=y
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_ECRYPT_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_SQUASHFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_NILFS2_FS is not set
> # CONFIG_NETWORK_FILESYSTEMS is not set
> CONFIG_EXPORTFS=m
> 
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> # CONFIG_MAC_PARTITION is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> # CONFIG_MINIX_SUBPARTITION is not set
> # CONFIG_SOLARIS_X86_PARTITION is not set
> # CONFIG_UNIXWARE_DISKLABEL is not set
> # CONFIG_LDM_PARTITION is not set
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> # CONFIG_KARMA_PARTITION is not set
> CONFIG_EFI_PARTITION=y
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
> # CONFIG_DLM is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_PRINTK_TIME=y
> CONFIG_ENABLE_WARN_DEPRECATED=y
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=2048
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> # CONFIG_DETECT_SOFTLOCKUP is not set
> CONFIG_DETECT_HUNG_TASK=y
> # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
> # CONFIG_SCHED_DEBUG is not set
> CONFIG_SCHEDSTATS=y
> CONFIG_TIMER_STATS=y
> # CONFIG_DEBUG_OBJECTS is not set
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> CONFIG_DEBUG_SPINLOCK=y
> CONFIG_DEBUG_MUTEXES=y
> CONFIG_DEBUG_LOCK_ALLOC=y
> CONFIG_PROVE_LOCKING=y
> CONFIG_LOCKDEP=y
> # CONFIG_LOCK_STAT is not set
> CONFIG_DEBUG_LOCKDEP=y
> CONFIG_TRACE_IRQFLAGS=y
> CONFIG_DEBUG_SPINLOCK_SLEEP=y
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> CONFIG_STACKTRACE=y
> # CONFIG_DEBUG_KOBJECT is not set
> # CONFIG_DEBUG_HIGHMEM is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_INFO=y
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_VIRTUAL is not set
> # CONFIG_DEBUG_WRITECOUNT is not set
> CONFIG_DEBUG_MEMORY_INIT=y
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_DEBUG_SG is not set
> # CONFIG_DEBUG_NOTIFIERS is not set
> CONFIG_ARCH_WANT_FRAME_POINTERS=y
> CONFIG_FRAME_POINTER=y
> CONFIG_BOOT_PRINTK_DELAY=y
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_RCU_CPU_STALL_DETECTOR is not set
> # CONFIG_KPROBES_SANITY_TEST is not set
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> # CONFIG_LKDTM is not set
> # CONFIG_FAULT_INJECTION is not set
> # CONFIG_LATENCYTOP is not set
> CONFIG_SYSCTL_SYSCALL_CHECK=y
> # CONFIG_DEBUG_PAGEALLOC is not set
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_FTRACE_SYSCALLS=y
> CONFIG_TRACING_SUPPORT=y
> 
> #
> # Tracers
> #
> # CONFIG_FUNCTION_TRACER is not set
> # CONFIG_IRQSOFF_TRACER is not set
> # CONFIG_SYSPROF_TRACER is not set
> # CONFIG_SCHED_TRACER is not set
> # CONFIG_CONTEXT_SWITCH_TRACER is not set
> # CONFIG_EVENT_TRACER is not set
> # CONFIG_FTRACE_SYSCALLS is not set
> # CONFIG_BOOT_TRACER is not set
> # CONFIG_TRACE_BRANCH_PROFILING is not set
> # CONFIG_POWER_TRACER is not set
> # CONFIG_STACK_TRACER is not set
> # CONFIG_KMEMTRACE is not set
> # CONFIG_WORKQUEUE_TRACER is not set
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_MMIOTRACE is not set
> CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
> # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
> # CONFIG_DYNAMIC_DEBUG is not set
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_KGDB is not set
> # CONFIG_STRICT_DEVMEM is not set
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> # CONFIG_EARLY_PRINTK_DBGP is not set
> CONFIG_DEBUG_STACKOVERFLOW=y
> CONFIG_DEBUG_STACK_USAGE=y
> # CONFIG_DEBUG_PER_CPU_MAPS is not set
> # CONFIG_X86_PTDUMP is not set
> CONFIG_DEBUG_RODATA=y
> # CONFIG_DEBUG_RODATA_TEST is not set
> CONFIG_DEBUG_NX_TEST=m
> # CONFIG_4KSTACKS is not set
> CONFIG_DOUBLEFAULT=y
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=0
> CONFIG_DEBUG_BOOT_PARAMS=y
> # CONFIG_CPA_DEBUG is not set
> CONFIG_OPTIMIZE_INLINING=y
> 
> #
> # Security options
> #
> CONFIG_KEYS=y
> CONFIG_KEYS_DEBUG_PROC_KEYS=y
> CONFIG_SECURITY=y
> # CONFIG_SECURITYFS is not set
> CONFIG_SECURITY_NETWORK=y
> # CONFIG_SECURITY_PATH is not set
> CONFIG_SECURITY_FILE_CAPABILITIES=y
> # CONFIG_SECURITY_ROOTPLUG is not set
> CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
> # CONFIG_SECURITY_SELINUX is not set
> # CONFIG_SECURITY_TOMOYO is not set
> # CONFIG_IMA is not set
> CONFIG_CRYPTO=y
> 
> #
> # Crypto core or helper
> #
> # CONFIG_CRYPTO_FIPS is not set
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> # CONFIG_CRYPTO_GF128MUL is not set
> # CONFIG_CRYPTO_NULL is not set
> CONFIG_CRYPTO_WORKQUEUE=y
> # CONFIG_CRYPTO_CRYPTD is not set
> # CONFIG_CRYPTO_AUTHENC is not set
> # CONFIG_CRYPTO_TEST is not set
> 
> #
> # Authenticated Encryption with Associated Data
> #
> # CONFIG_CRYPTO_CCM is not set
> # CONFIG_CRYPTO_GCM is not set
> # CONFIG_CRYPTO_SEQIV is not set
> 
> #
> # Block modes
> #
> # CONFIG_CRYPTO_CBC is not set
> # CONFIG_CRYPTO_CTR is not set
> # CONFIG_CRYPTO_CTS is not set
> CONFIG_CRYPTO_ECB=y
> # CONFIG_CRYPTO_LRW is not set
> # CONFIG_CRYPTO_PCBC is not set
> # CONFIG_CRYPTO_XTS is not set
> 
> #
> # Hash modes
> #
> # CONFIG_CRYPTO_HMAC is not set
> # CONFIG_CRYPTO_XCBC is not set
> 
> #
> # Digest
> #
> # CONFIG_CRYPTO_CRC32C is not set
> # CONFIG_CRYPTO_CRC32C_INTEL is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_MICHAEL_MIC=m
> # CONFIG_CRYPTO_RMD128 is not set
> # CONFIG_CRYPTO_RMD160 is not set
> # CONFIG_CRYPTO_RMD256 is not set
> # CONFIG_CRYPTO_RMD320 is not set
> CONFIG_CRYPTO_SHA1=y
> # CONFIG_CRYPTO_SHA256 is not set
> # CONFIG_CRYPTO_SHA512 is not set
> # CONFIG_CRYPTO_TGR192 is not set
> # CONFIG_CRYPTO_WP512 is not set
> 
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> # CONFIG_CRYPTO_AES_586 is not set
> # CONFIG_CRYPTO_ANUBIS is not set
> CONFIG_CRYPTO_ARC4=y
> # CONFIG_CRYPTO_BLOWFISH is not set
> # CONFIG_CRYPTO_CAMELLIA is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> # CONFIG_CRYPTO_DES is not set
> # CONFIG_CRYPTO_FCRYPT is not set
> # CONFIG_CRYPTO_KHAZAD is not set
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_SALSA20_586 is not set
> # CONFIG_CRYPTO_SEED is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> # CONFIG_CRYPTO_TWOFISH_586 is not set
> 
> #
> # Compression
> #
> # CONFIG_CRYPTO_DEFLATE is not set
> # CONFIG_CRYPTO_ZLIB is not set
> # CONFIG_CRYPTO_LZO is not set
> 
> #
> # Random Number Generation
> #
> # CONFIG_CRYPTO_ANSI_CPRNG is not set
> # CONFIG_CRYPTO_HW is not set
> CONFIG_HAVE_KVM=y
> CONFIG_HAVE_KVM_IRQCHIP=y
> CONFIG_VIRTUALIZATION=y
> CONFIG_KVM=m
> CONFIG_KVM_INTEL=m
> # CONFIG_KVM_AMD is not set
> # CONFIG_KVM_TRACE is not set
> CONFIG_LGUEST=m
> CONFIG_VIRTIO=y
> CONFIG_VIRTIO_RING=y
> # CONFIG_VIRTIO_PCI is not set
> # CONFIG_VIRTIO_BALLOON is not set
> # CONFIG_BINARY_PRINTF is not set
> 
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_FIND_NEXT_BIT=y
> CONFIG_GENERIC_FIND_LAST_BIT=y
> CONFIG_CRC_CCITT=y
> # CONFIG_CRC16 is not set
> CONFIG_CRC_T10DIF=y
> CONFIG_CRC_ITU_T=m
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> # CONFIG_LIBCRC32C is not set
> CONFIG_AUDIT_GENERIC=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_CHECK_SIGNATURE=y
> CONFIG_NLATTR=y

Re: [Bug #13475] suspend/hibernate lockdep warning

[Mathieu Desnoyers]

* Pekka Enberg (penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org) wrote:
> On Mon, 2009-06-08 at 15:35 +0800, Dave Young wrote:
> > On Sun, Jun 7, 2009 at 9:21 PM, Pekka Enberg<penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org> wrote:
> > > On Sun, Jun 7, 2009 at 12:52 PM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> > >> This message has been generated automatically as a part of a report
> > >> of recent regressions.
> > >>
> > >> The following bug entry is on the current list of known regressions
> > >> from 2.6.29.  Please verify if it still should be listed and let me know
> > >> (either way).
> > >>
> > >>
> > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> > >> Subject         : suspend/hibernate lockdep warning
> > >> Submitter       : Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > >> Date            : 2009-06-02 10:00 (6 days old)
> > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> > >
> > > Looks like a cpufreq locking problem to me. Lets add some
> > > get_maintainer.pl loving to the cc list. Can you post your .config
> > > too, btw?
> > 
> > I suspect the following commit, after revert this patch I test 5 times
> > without lockdep warnings.
> > 
> > commit b14893a62c73af0eca414cfed505b8c09efc613c
> > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> > Date:   Sun May 17 10:30:45 2009 -0400
> > 
> > 	[CPUFREQ] fix timer teardown in ondemand governor
> 
> The patch is probably not at fault here. I suspect it's some latent bug
> that simply got exposed by the change to cancel_delayed_work_sync(). In
> any case, Mathieu, can you take a look at this please?
> 

Hi Pekka,

Yes, it's been looked at and discussed on the cpufreq ML. The short
answer is that they plan to re-engineer cpufreq and remove the policy
rwlock taken around almost every operations at the cpufreq level.

The short-term solution, which is recognised as ugly, would be do to the
following before doing the cancel_delayed_work_sync() :

unlock policy rwlock write lock

lock policy rwlock write lock

It basically works because this rwlock is unneeded for teardown, hence
the future re-work planned.

I'm sorry I cannot prepare a patch current... I've got quite a few pages
of Ph.D. thesis due for the beginning of July.

Thanks,

Mathieu


> 			Pekka
> 
> > Please see the config:
> > 
> > #
> > # Automatically generated make config: don't edit
> > # Linux kernel version: 2.6.30-rc7
> > # Wed Jun  3 10:33:40 2009
> > #
> > # CONFIG_64BIT is not set
> > CONFIG_X86_32=y
> > # CONFIG_X86_64 is not set
> > CONFIG_X86=y
> > CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
> > CONFIG_GENERIC_TIME=y
> > CONFIG_GENERIC_CMOS_UPDATE=y
> > CONFIG_CLOCKSOURCE_WATCHDOG=y
> > CONFIG_GENERIC_CLOCKEVENTS=y
> > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> > CONFIG_LOCKDEP_SUPPORT=y
> > CONFIG_STACKTRACE_SUPPORT=y
> > CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> > CONFIG_FAST_CMPXCHG_LOCAL=y
> > CONFIG_MMU=y
> > CONFIG_ZONE_DMA=y
> > CONFIG_GENERIC_ISA_DMA=y
> > CONFIG_GENERIC_IOMAP=y
> > CONFIG_GENERIC_BUG=y
> > CONFIG_GENERIC_HWEIGHT=y
> > CONFIG_GENERIC_GPIO=y
> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> > CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> > CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> > CONFIG_GENERIC_CALIBRATE_DELAY=y
> > # CONFIG_GENERIC_TIME_VSYSCALL is not set
> > CONFIG_ARCH_HAS_CPU_RELAX=y
> > CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> > CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> > CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> > CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
> > # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
> > CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> > CONFIG_ARCH_SUSPEND_POSSIBLE=y
> > # CONFIG_ZONE_DMA32 is not set
> > CONFIG_ARCH_POPULATES_NODE_MAP=y
> > # CONFIG_AUDIT_ARCH is not set
> > CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> > CONFIG_GENERIC_HARDIRQS=y
> > CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
> > CONFIG_GENERIC_IRQ_PROBE=y
> > CONFIG_GENERIC_PENDING_IRQ=y
> > CONFIG_USE_GENERIC_SMP_HELPERS=y
> > CONFIG_X86_32_SMP=y
> > CONFIG_X86_HT=y
> > CONFIG_X86_TRAMPOLINE=y
> > CONFIG_X86_32_LAZY_GS=y
> > CONFIG_KTIME_SCALAR=y
> > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> > 
> > #
> > # General setup
> > #
> > CONFIG_EXPERIMENTAL=y
> > CONFIG_LOCK_KERNEL=y
> > CONFIG_INIT_ENV_ARG_LIMIT=32
> > CONFIG_LOCALVERSION=""
> > CONFIG_LOCALVERSION_AUTO=y
> > CONFIG_HAVE_KERNEL_GZIP=y
> > CONFIG_HAVE_KERNEL_BZIP2=y
> > CONFIG_HAVE_KERNEL_LZMA=y
> > CONFIG_KERNEL_GZIP=y
> > # CONFIG_KERNEL_BZIP2 is not set
> > # CONFIG_KERNEL_LZMA is not set
> > CONFIG_SWAP=y
> > CONFIG_SYSVIPC=y
> > CONFIG_SYSVIPC_SYSCTL=y
> > CONFIG_POSIX_MQUEUE=y
> > CONFIG_POSIX_MQUEUE_SYSCTL=y
> > CONFIG_BSD_PROCESS_ACCT=y
> > # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> > CONFIG_TASKSTATS=y
> > CONFIG_TASK_DELAY_ACCT=y
> > CONFIG_TASK_XACCT=y
> > CONFIG_TASK_IO_ACCOUNTING=y
> > CONFIG_AUDIT=y
> > CONFIG_AUDITSYSCALL=y
> > CONFIG_AUDIT_TREE=y
> > 
> > #
> > # RCU Subsystem
> > #
> > CONFIG_CLASSIC_RCU=y
> > # CONFIG_TREE_RCU is not set
> > # CONFIG_PREEMPT_RCU is not set
> > # CONFIG_TREE_RCU_TRACE is not set
> > # CONFIG_PREEMPT_RCU_TRACE is not set
> > CONFIG_IKCONFIG=y
> > CONFIG_IKCONFIG_PROC=y
> > CONFIG_LOG_BUF_SHIFT=18
> > CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> > CONFIG_GROUP_SCHED=y
> > CONFIG_FAIR_GROUP_SCHED=y
> > # CONFIG_RT_GROUP_SCHED is not set
> > # CONFIG_USER_SCHED is not set
> > CONFIG_CGROUP_SCHED=y
> > CONFIG_CGROUPS=y
> > # CONFIG_CGROUP_DEBUG is not set
> > CONFIG_CGROUP_NS=y
> > # CONFIG_CGROUP_FREEZER is not set
> > # CONFIG_CGROUP_DEVICE is not set
> > CONFIG_CPUSETS=y
> > CONFIG_PROC_PID_CPUSET=y
> > CONFIG_CGROUP_CPUACCT=y
> > CONFIG_RESOURCE_COUNTERS=y
> > # CONFIG_CGROUP_MEM_RES_CTLR is not set
> > # CONFIG_SYSFS_DEPRECATED_V2 is not set
> > CONFIG_RELAY=y
> > CONFIG_NAMESPACES=y
> > CONFIG_UTS_NS=y
> > CONFIG_IPC_NS=y
> > CONFIG_USER_NS=y
> > CONFIG_PID_NS=y
> > # CONFIG_NET_NS is not set
> > CONFIG_BLK_DEV_INITRD=y
> > CONFIG_INITRAMFS_SOURCE=""
> > CONFIG_RD_GZIP=y
> > CONFIG_RD_BZIP2=y
> > CONFIG_RD_LZMA=y
> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> > CONFIG_SYSCTL=y
> > CONFIG_ANON_INODES=y
> > # CONFIG_EMBEDDED is not set
> > CONFIG_UID16=y
> > CONFIG_SYSCTL_SYSCALL=y
> > CONFIG_KALLSYMS=y
> > CONFIG_KALLSYMS_ALL=y
> > CONFIG_KALLSYMS_EXTRA_PASS=y
> > CONFIG_STRIP_ASM_SYMS=y
> > CONFIG_HOTPLUG=y
> > CONFIG_PRINTK=y
> > CONFIG_BUG=y
> > CONFIG_ELF_CORE=y
> > CONFIG_PCSPKR_PLATFORM=y
> > CONFIG_BASE_FULL=y
> > CONFIG_FUTEX=y
> > CONFIG_EPOLL=y
> > CONFIG_SIGNALFD=y
> > CONFIG_TIMERFD=y
> > CONFIG_EVENTFD=y
> > CONFIG_SHMEM=y
> > CONFIG_AIO=y
> > CONFIG_VM_EVENT_COUNTERS=y
> > CONFIG_PCI_QUIRKS=y
> > CONFIG_SLUB_DEBUG=y
> > # CONFIG_COMPAT_BRK is not set
> > # CONFIG_SLAB is not set
> > CONFIG_SLUB=y
> > # CONFIG_SLOB is not set
> > CONFIG_PROFILING=y
> > CONFIG_TRACEPOINTS=y
> > CONFIG_MARKERS=y
> > # CONFIG_OPROFILE is not set
> > CONFIG_HAVE_OPROFILE=y
> > CONFIG_KPROBES=y
> > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> > CONFIG_KRETPROBES=y
> > CONFIG_HAVE_IOREMAP_PROT=y
> > CONFIG_HAVE_KPROBES=y
> > CONFIG_HAVE_KRETPROBES=y
> > CONFIG_HAVE_ARCH_TRACEHOOK=y
> > CONFIG_HAVE_DMA_API_DEBUG=y
> > # CONFIG_SLOW_WORK is not set
> > CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> > CONFIG_SLABINFO=y
> > CONFIG_RT_MUTEXES=y
> > CONFIG_BASE_SMALL=0
> > CONFIG_MODULES=y
> > # CONFIG_MODULE_FORCE_LOAD is not set
> > CONFIG_MODULE_UNLOAD=y
> > CONFIG_MODULE_FORCE_UNLOAD=y
> > # CONFIG_MODVERSIONS is not set
> > # CONFIG_MODULE_SRCVERSION_ALL is not set
> > CONFIG_STOP_MACHINE=y
> > CONFIG_BLOCK=y
> > # CONFIG_LBD is not set
> > CONFIG_BLK_DEV_BSG=y
> > # CONFIG_BLK_DEV_INTEGRITY is not set
> > 
> > #
> > # IO Schedulers
> > #
> > CONFIG_IOSCHED_NOOP=y
> > CONFIG_IOSCHED_AS=y
> > CONFIG_IOSCHED_DEADLINE=y
> > CONFIG_IOSCHED_CFQ=y
> > # CONFIG_DEFAULT_AS is not set
> > # CONFIG_DEFAULT_DEADLINE is not set
> > CONFIG_DEFAULT_CFQ=y
> > # CONFIG_DEFAULT_NOOP is not set
> > CONFIG_DEFAULT_IOSCHED="cfq"
> > CONFIG_PREEMPT_NOTIFIERS=y
> > CONFIG_FREEZER=y
> > 
> > #
> > # Processor type and features
> > #
> > CONFIG_TICK_ONESHOT=y
> > CONFIG_NO_HZ=y
> > CONFIG_HIGH_RES_TIMERS=y
> > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> > CONFIG_SMP=y
> > # CONFIG_SPARSE_IRQ is not set
> > CONFIG_X86_MPPARSE=y
> > # CONFIG_X86_BIGSMP is not set
> > CONFIG_X86_EXTENDED_PLATFORM=y
> > # CONFIG_X86_ELAN is not set
> > # CONFIG_X86_RDC321X is not set
> > # CONFIG_X86_32_NON_STANDARD is not set
> > CONFIG_SCHED_OMIT_FRAME_POINTER=y
> > CONFIG_PARAVIRT_GUEST=y
> > # CONFIG_VMI is not set
> > CONFIG_KVM_CLOCK=y
> > CONFIG_KVM_GUEST=y
> > CONFIG_LGUEST_GUEST=y
> > CONFIG_PARAVIRT=y
> > CONFIG_PARAVIRT_SPINLOCKS=y
> > CONFIG_PARAVIRT_CLOCK=y
> > # CONFIG_PARAVIRT_DEBUG is not set
> > # CONFIG_MEMTEST is not set
> > # CONFIG_M386 is not set
> > # CONFIG_M486 is not set
> > # CONFIG_M586 is not set
> > # CONFIG_M586TSC is not set
> > # CONFIG_M586MMX is not set
> > # CONFIG_M686 is not set
> > # CONFIG_MPENTIUMII is not set
> > # CONFIG_MPENTIUMIII is not set
> > # CONFIG_MPENTIUMM is not set
> > # CONFIG_MPENTIUM4 is not set
> > # CONFIG_MK6 is not set
> > # CONFIG_MK7 is not set
> > # CONFIG_MK8 is not set
> > # CONFIG_MCRUSOE is not set
> > # CONFIG_MEFFICEON is not set
> > # CONFIG_MWINCHIPC6 is not set
> > # CONFIG_MWINCHIP3D is not set
> > # CONFIG_MGEODEGX1 is not set
> > # CONFIG_MGEODE_LX is not set
> > # CONFIG_MCYRIXIII is not set
> > # CONFIG_MVIAC3_2 is not set
> > # CONFIG_MVIAC7 is not set
> > # CONFIG_MPSC is not set
> > CONFIG_MCORE2=y
> > # CONFIG_GENERIC_CPU is not set
> > CONFIG_X86_GENERIC=y
> > CONFIG_X86_CPU=y
> > CONFIG_X86_L1_CACHE_BYTES=64
> > CONFIG_X86_INTERNODE_CACHE_BYTES=64
> > CONFIG_X86_CMPXCHG=y
> > CONFIG_X86_L1_CACHE_SHIFT=6
> > CONFIG_X86_XADD=y
> > CONFIG_X86_WP_WORKS_OK=y
> > CONFIG_X86_INVLPG=y
> > CONFIG_X86_BSWAP=y
> > CONFIG_X86_POPAD_OK=y
> > CONFIG_X86_INTEL_USERCOPY=y
> > CONFIG_X86_USE_PPRO_CHECKSUM=y
> > CONFIG_X86_TSC=y
> > CONFIG_X86_CMOV=y
> > CONFIG_X86_MINIMUM_CPU_FAMILY=4
> > CONFIG_X86_DEBUGCTLMSR=y
> > CONFIG_CPU_SUP_INTEL=y
> > CONFIG_CPU_SUP_CYRIX_32=y
> > CONFIG_CPU_SUP_AMD=y
> > CONFIG_CPU_SUP_CENTAUR=y
> > CONFIG_CPU_SUP_TRANSMETA_32=y
> > CONFIG_CPU_SUP_UMC_32=y
> > # CONFIG_X86_DS is not set
> > CONFIG_HPET_TIMER=y
> > CONFIG_HPET_EMULATE_RTC=y
> > CONFIG_DMI=y
> > # CONFIG_IOMMU_HELPER is not set
> > # CONFIG_IOMMU_API is not set
> > CONFIG_NR_CPUS=2
> > CONFIG_SCHED_SMT=y
> > CONFIG_SCHED_MC=y
> > # CONFIG_PREEMPT_NONE is not set
> > CONFIG_PREEMPT_VOLUNTARY=y
> > # CONFIG_PREEMPT is not set
> > CONFIG_X86_LOCAL_APIC=y
> > CONFIG_X86_IO_APIC=y
> > # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> > # CONFIG_X86_MCE is not set
> > CONFIG_VM86=y
> > # CONFIG_TOSHIBA is not set
> > CONFIG_I8K=y
> > CONFIG_X86_REBOOTFIXUPS=y
> > CONFIG_MICROCODE=y
> > CONFIG_MICROCODE_INTEL=y
> > # CONFIG_MICROCODE_AMD is not set
> > CONFIG_MICROCODE_OLD_INTERFACE=y
> > CONFIG_X86_MSR=y
> > CONFIG_X86_CPUID=y
> > # CONFIG_X86_CPU_DEBUG is not set
> > # CONFIG_NOHIGHMEM is not set
> > CONFIG_HIGHMEM4G=y
> > # CONFIG_HIGHMEM64G is not set
> > CONFIG_PAGE_OFFSET=0xC0000000
> > CONFIG_HIGHMEM=y
> > # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
> > CONFIG_ARCH_FLATMEM_ENABLE=y
> > CONFIG_ARCH_SPARSEMEM_ENABLE=y
> > CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> > CONFIG_SELECT_MEMORY_MODEL=y
> > CONFIG_FLATMEM_MANUAL=y
> > # CONFIG_DISCONTIGMEM_MANUAL is not set
> > # CONFIG_SPARSEMEM_MANUAL is not set
> > CONFIG_FLATMEM=y
> > CONFIG_FLAT_NODE_MEM_MAP=y
> > CONFIG_SPARSEMEM_STATIC=y
> > CONFIG_PAGEFLAGS_EXTENDED=y
> > CONFIG_SPLIT_PTLOCK_CPUS=4
> > # CONFIG_PHYS_ADDR_T_64BIT is not set
> > CONFIG_ZONE_DMA_FLAG=1
> > CONFIG_BOUNCE=y
> > CONFIG_VIRT_TO_BUS=y
> > CONFIG_UNEVICTABLE_LRU=y
> > CONFIG_HAVE_MLOCK=y
> > CONFIG_HAVE_MLOCKED_PAGE_BIT=y
> > CONFIG_MMU_NOTIFIER=y
> > CONFIG_HIGHPTE=y
> > # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> > CONFIG_X86_RESERVE_LOW_64K=y
> > # CONFIG_MATH_EMULATION is not set
> > CONFIG_MTRR=y
> > CONFIG_MTRR_SANITIZER=y
> > CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
> > CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> > CONFIG_X86_PAT=y
> > CONFIG_EFI=y
> > CONFIG_SECCOMP=y
> > # CONFIG_CC_STACKPROTECTOR is not set
> > # CONFIG_HZ_100 is not set
> > # CONFIG_HZ_250 is not set
> > CONFIG_HZ_300=y
> > # CONFIG_HZ_1000 is not set
> > CONFIG_HZ=300
> > CONFIG_SCHED_HRTICK=y
> > CONFIG_KEXEC=y
> > CONFIG_CRASH_DUMP=y
> > # CONFIG_KEXEC_JUMP is not set
> > CONFIG_PHYSICAL_START=0x1000000
> > # CONFIG_RELOCATABLE is not set
> > CONFIG_PHYSICAL_ALIGN=0x200000
> > CONFIG_HOTPLUG_CPU=y
> > # CONFIG_COMPAT_VDSO is not set
> > # CONFIG_CMDLINE_BOOL is not set
> > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> > 
> > #
> > # Power management and ACPI options
> > #
> > CONFIG_PM=y
> > CONFIG_PM_DEBUG=y
> > # CONFIG_PM_VERBOSE is not set
> > CONFIG_CAN_PM_TRACE=y
> > CONFIG_PM_TRACE=y
> > CONFIG_PM_TRACE_RTC=y
> > CONFIG_PM_SLEEP_SMP=y
> > CONFIG_PM_SLEEP=y
> > CONFIG_SUSPEND=y
> > # CONFIG_PM_TEST_SUSPEND is not set
> > CONFIG_SUSPEND_FREEZER=y
> > CONFIG_HIBERNATION=y
> > CONFIG_PM_STD_PARTITION=""
> > CONFIG_ACPI=y
> > CONFIG_ACPI_SLEEP=y
> > CONFIG_ACPI_PROCFS=y
> > CONFIG_ACPI_PROCFS_POWER=y
> > CONFIG_ACPI_SYSFS_POWER=y
> > CONFIG_ACPI_PROC_EVENT=y
> > CONFIG_ACPI_AC=y
> > CONFIG_ACPI_BATTERY=y
> > CONFIG_ACPI_BUTTON=y
> > CONFIG_ACPI_VIDEO=y
> > CONFIG_ACPI_FAN=y
> > CONFIG_ACPI_DOCK=y
> > CONFIG_ACPI_PROCESSOR=y
> > CONFIG_ACPI_HOTPLUG_CPU=y
> > CONFIG_ACPI_THERMAL=y
> > # CONFIG_ACPI_CUSTOM_DSDT is not set
> > CONFIG_ACPI_BLACKLIST_YEAR=0
> > # CONFIG_ACPI_DEBUG is not set
> > # CONFIG_ACPI_PCI_SLOT is not set
> > CONFIG_X86_PM_TIMER=y
> > CONFIG_ACPI_CONTAINER=y
> > CONFIG_ACPI_SBS=y
> > # CONFIG_APM is not set
> > 
> > #
> > # CPU Frequency scaling
> > #
> > CONFIG_CPU_FREQ=y
> > CONFIG_CPU_FREQ_TABLE=y
> > CONFIG_CPU_FREQ_DEBUG=y
> > CONFIG_CPU_FREQ_STAT=y
> > CONFIG_CPU_FREQ_STAT_DETAILS=y
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> > CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> > CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> > CONFIG_CPU_FREQ_GOV_USERSPACE=y
> > CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> > 
> > #
> > # CPUFreq processor drivers
> > #
> > CONFIG_X86_ACPI_CPUFREQ=y
> > # CONFIG_X86_POWERNOW_K6 is not set
> > # CONFIG_X86_POWERNOW_K7 is not set
> > # CONFIG_X86_POWERNOW_K8 is not set
> > # CONFIG_X86_GX_SUSPMOD is not set
> > # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> > CONFIG_X86_SPEEDSTEP_ICH=y
> > # CONFIG_X86_SPEEDSTEP_SMI is not set
> > CONFIG_X86_P4_CLOCKMOD=y
> > # CONFIG_X86_CPUFREQ_NFORCE2 is not set
> > # CONFIG_X86_LONGRUN is not set
> > # CONFIG_X86_LONGHAUL is not set
> > # CONFIG_X86_E_POWERSAVER is not set
> > 
> > #
> > # shared options
> > #
> > CONFIG_X86_SPEEDSTEP_LIB=y
> > CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
> > CONFIG_CPU_IDLE=y
> > CONFIG_CPU_IDLE_GOV_LADDER=y
> > CONFIG_CPU_IDLE_GOV_MENU=y
> > 
> > #
> > # Bus options (PCI etc.)
> > #
> > CONFIG_PCI=y
> > # CONFIG_PCI_GOBIOS is not set
> > # CONFIG_PCI_GOMMCONFIG is not set
> > # CONFIG_PCI_GODIRECT is not set
> > # CONFIG_PCI_GOOLPC is not set
> > CONFIG_PCI_GOANY=y
> > CONFIG_PCI_BIOS=y
> > CONFIG_PCI_DIRECT=y
> > CONFIG_PCI_MMCONFIG=y
> > CONFIG_PCI_DOMAINS=y
> > # CONFIG_DMAR is not set
> > CONFIG_PCIEPORTBUS=y
> > # CONFIG_HOTPLUG_PCI_PCIE is not set
> > CONFIG_PCIEAER=y
> > # CONFIG_PCIEASPM is not set
> > CONFIG_ARCH_SUPPORTS_MSI=y
> > CONFIG_PCI_MSI=y
> > # CONFIG_PCI_LEGACY is not set
> > # CONFIG_PCI_DEBUG is not set
> > # CONFIG_PCI_STUB is not set
> > CONFIG_HT_IRQ=y
> > # CONFIG_PCI_IOV is not set
> > CONFIG_ISA_DMA_API=y
> > # CONFIG_ISA is not set
> > # CONFIG_MCA is not set
> > # CONFIG_SCx200 is not set
> > # CONFIG_OLPC is not set
> > CONFIG_K8_NB=y
> > CONFIG_PCCARD=y
> > # CONFIG_PCMCIA_DEBUG is not set
> > CONFIG_PCMCIA=y
> > CONFIG_PCMCIA_LOAD_CIS=y
> > CONFIG_PCMCIA_IOCTL=y
> > CONFIG_CARDBUS=y
> > 
> > #
> > # PC-card bridges
> > #
> > CONFIG_YENTA=y
> > CONFIG_YENTA_O2=y
> > CONFIG_YENTA_RICOH=y
> > CONFIG_YENTA_TI=y
> > CONFIG_YENTA_ENE_TUNE=y
> > CONFIG_YENTA_TOSHIBA=y
> > # CONFIG_PD6729 is not set
> > CONFIG_I82092=y
> > CONFIG_PCCARD_NONSTATIC=y
> > CONFIG_HOTPLUG_PCI=y
> > # CONFIG_HOTPLUG_PCI_FAKE is not set
> > # CONFIG_HOTPLUG_PCI_IBM is not set
> > # CONFIG_HOTPLUG_PCI_ACPI is not set
> > # CONFIG_HOTPLUG_PCI_CPCI is not set
> > # CONFIG_HOTPLUG_PCI_SHPC is not set
> > 
> > #
> > # Executable file formats / Emulations
> > #
> > CONFIG_BINFMT_ELF=y
> > # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> > CONFIG_HAVE_AOUT=y
> > # CONFIG_BINFMT_AOUT is not set
> > CONFIG_BINFMT_MISC=y
> > CONFIG_HAVE_ATOMIC_IOMAP=y
> > CONFIG_NET=y
> > 
> > #
> > # Networking options
> > #
> > CONFIG_PACKET=y
> > CONFIG_PACKET_MMAP=y
> > CONFIG_UNIX=y
> > # CONFIG_NET_KEY is not set
> > CONFIG_INET=y
> > CONFIG_IP_MULTICAST=y
> > CONFIG_IP_ADVANCED_ROUTER=y
> > CONFIG_ASK_IP_FIB_HASH=y
> > # CONFIG_IP_FIB_TRIE is not set
> > CONFIG_IP_FIB_HASH=y
> > CONFIG_IP_MULTIPLE_TABLES=y
> > CONFIG_IP_ROUTE_MULTIPATH=y
> > CONFIG_IP_ROUTE_VERBOSE=y
> > CONFIG_IP_PNP=y
> > CONFIG_IP_PNP_DHCP=y
> > CONFIG_IP_PNP_BOOTP=y
> > CONFIG_IP_PNP_RARP=y
> > # CONFIG_NET_IPIP is not set
> > # CONFIG_NET_IPGRE is not set
> > CONFIG_IP_MROUTE=y
> > CONFIG_IP_PIMSM_V1=y
> > CONFIG_IP_PIMSM_V2=y
> > # CONFIG_ARPD is not set
> > CONFIG_SYN_COOKIES=y
> > # CONFIG_INET_AH is not set
> > # CONFIG_INET_ESP is not set
> > # CONFIG_INET_IPCOMP is not set
> > # CONFIG_INET_XFRM_TUNNEL is not set
> > # CONFIG_INET_TUNNEL is not set
> > # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> > # CONFIG_INET_XFRM_MODE_TUNNEL is not set
> > # CONFIG_INET_XFRM_MODE_BEET is not set
> > CONFIG_INET_LRO=y
> > # CONFIG_INET_DIAG is not set
> > CONFIG_TCP_CONG_ADVANCED=y
> > # CONFIG_TCP_CONG_BIC is not set
> > CONFIG_TCP_CONG_CUBIC=y
> > # CONFIG_TCP_CONG_WESTWOOD is not set
> > # CONFIG_TCP_CONG_HTCP is not set
> > # CONFIG_TCP_CONG_HSTCP is not set
> > # CONFIG_TCP_CONG_HYBLA is not set
> > # CONFIG_TCP_CONG_VEGAS is not set
> > # CONFIG_TCP_CONG_SCALABLE is not set
> > # CONFIG_TCP_CONG_LP is not set
> > # CONFIG_TCP_CONG_VENO is not set
> > # CONFIG_TCP_CONG_YEAH is not set
> > # CONFIG_TCP_CONG_ILLINOIS is not set
> > # CONFIG_DEFAULT_BIC is not set
> > CONFIG_DEFAULT_CUBIC=y
> > # CONFIG_DEFAULT_HTCP is not set
> > # CONFIG_DEFAULT_VEGAS is not set
> > # CONFIG_DEFAULT_WESTWOOD is not set
> > # CONFIG_DEFAULT_RENO is not set
> > CONFIG_DEFAULT_TCP_CONG="cubic"
> > CONFIG_TCP_MD5SIG=y
> > # CONFIG_IPV6 is not set
> > # CONFIG_NETLABEL is not set
> > CONFIG_NETWORK_SECMARK=y
> > CONFIG_NETFILTER=y
> > # CONFIG_NETFILTER_DEBUG is not set
> > # CONFIG_NETFILTER_ADVANCED is not set
> > 
> > #
> > # Core Netfilter Configuration
> > #
> > CONFIG_NETFILTER_NETLINK=y
> > CONFIG_NETFILTER_NETLINK_LOG=y
> > CONFIG_NF_CONNTRACK=y
> > CONFIG_NF_CONNTRACK_SECMARK=y
> > CONFIG_NF_CONNTRACK_FTP=y
> > CONFIG_NF_CONNTRACK_IRC=y
> > CONFIG_NF_CONNTRACK_SIP=y
> > CONFIG_NF_CT_NETLINK=y
> > CONFIG_NETFILTER_XTABLES=y
> > CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
> > CONFIG_NETFILTER_XT_TARGET_MARK=y
> > CONFIG_NETFILTER_XT_TARGET_NFLOG=y
> > CONFIG_NETFILTER_XT_TARGET_SECMARK=y
> > CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
> > CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
> > CONFIG_NETFILTER_XT_MATCH_MARK=y
> > CONFIG_NETFILTER_XT_MATCH_STATE=y
> > # CONFIG_IP_VS is not set
> > 
> > #
> > # IP: Netfilter Configuration
> > #
> > CONFIG_NF_DEFRAG_IPV4=y
> > CONFIG_NF_CONNTRACK_IPV4=y
> > CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> > CONFIG_IP_NF_IPTABLES=y
> > CONFIG_IP_NF_FILTER=y
> > CONFIG_IP_NF_TARGET_REJECT=y
> > CONFIG_IP_NF_TARGET_LOG=y
> > CONFIG_IP_NF_TARGET_ULOG=y
> > CONFIG_NF_NAT=y
> > CONFIG_NF_NAT_NEEDED=y
> > CONFIG_IP_NF_TARGET_MASQUERADE=y
> > CONFIG_NF_NAT_FTP=y
> > CONFIG_NF_NAT_IRC=y
> > # CONFIG_NF_NAT_TFTP is not set
> > # CONFIG_NF_NAT_AMANDA is not set
> > # CONFIG_NF_NAT_PPTP is not set
> > # CONFIG_NF_NAT_H323 is not set
> > CONFIG_NF_NAT_SIP=y
> > CONFIG_IP_NF_MANGLE=y
> > # CONFIG_IP_DCCP is not set
> > # CONFIG_IP_SCTP is not set
> > # CONFIG_TIPC is not set
> > # CONFIG_ATM is not set
> > # CONFIG_BRIDGE is not set
> > # CONFIG_NET_DSA is not set
> > # CONFIG_VLAN_8021Q is not set
> > # CONFIG_DECNET is not set
> > # CONFIG_LLC2 is not set
> > # CONFIG_IPX is not set
> > # CONFIG_ATALK is not set
> > # CONFIG_X25 is not set
> > # CONFIG_LAPB is not set
> > # CONFIG_ECONET is not set
> > # CONFIG_WAN_ROUTER is not set
> > # CONFIG_PHONET is not set
> > CONFIG_NET_SCHED=y
> > 
> > #
> > # Queueing/Scheduling
> > #
> > # CONFIG_NET_SCH_CBQ is not set
> > # CONFIG_NET_SCH_HTB is not set
> > # CONFIG_NET_SCH_HFSC is not set
> > # CONFIG_NET_SCH_PRIO is not set
> > # CONFIG_NET_SCH_MULTIQ is not set
> > # CONFIG_NET_SCH_RED is not set
> > # CONFIG_NET_SCH_SFQ is not set
> > # CONFIG_NET_SCH_TEQL is not set
> > # CONFIG_NET_SCH_TBF is not set
> > # CONFIG_NET_SCH_GRED is not set
> > # CONFIG_NET_SCH_DSMARK is not set
> > # CONFIG_NET_SCH_NETEM is not set
> > # CONFIG_NET_SCH_DRR is not set
> > # CONFIG_NET_SCH_INGRESS is not set
> > 
> > #
> > # Classification
> > #
> > CONFIG_NET_CLS=y
> > # CONFIG_NET_CLS_BASIC is not set
> > # CONFIG_NET_CLS_TCINDEX is not set
> > # CONFIG_NET_CLS_ROUTE4 is not set
> > # CONFIG_NET_CLS_FW is not set
> > # CONFIG_NET_CLS_U32 is not set
> > # CONFIG_NET_CLS_RSVP is not set
> > # CONFIG_NET_CLS_RSVP6 is not set
> > # CONFIG_NET_CLS_FLOW is not set
> > # CONFIG_NET_CLS_CGROUP is not set
> > CONFIG_NET_EMATCH=y
> > CONFIG_NET_EMATCH_STACK=32
> > # CONFIG_NET_EMATCH_CMP is not set
> > # CONFIG_NET_EMATCH_NBYTE is not set
> > # CONFIG_NET_EMATCH_U32 is not set
> > # CONFIG_NET_EMATCH_META is not set
> > # CONFIG_NET_EMATCH_TEXT is not set
> > CONFIG_NET_CLS_ACT=y
> > # CONFIG_NET_ACT_POLICE is not set
> > # CONFIG_NET_ACT_GACT is not set
> > # CONFIG_NET_ACT_MIRRED is not set
> > # CONFIG_NET_ACT_IPT is not set
> > # CONFIG_NET_ACT_NAT is not set
> > # CONFIG_NET_ACT_PEDIT is not set
> > # CONFIG_NET_ACT_SIMP is not set
> > # CONFIG_NET_ACT_SKBEDIT is not set
> > CONFIG_NET_SCH_FIFO=y
> > # CONFIG_DCB is not set
> > 
> > #
> > # Network testing
> > #
> > # CONFIG_NET_PKTGEN is not set
> > # CONFIG_NET_TCPPROBE is not set
> > # CONFIG_NET_DROP_MONITOR is not set
> > # CONFIG_HAMRADIO is not set
> > # CONFIG_CAN is not set
> > # CONFIG_IRDA is not set
> > CONFIG_BT=m
> > CONFIG_BT_L2CAP=m
> > CONFIG_BT_SCO=m
> > CONFIG_BT_RFCOMM=m
> > CONFIG_BT_RFCOMM_TTY=y
> > CONFIG_BT_BNEP=m
> > CONFIG_BT_BNEP_MC_FILTER=y
> > CONFIG_BT_BNEP_PROTO_FILTER=y
> > CONFIG_BT_HIDP=m
> > 
> > #
> > # Bluetooth device drivers
> > #
> > CONFIG_BT_HCIBTUSB=m
> > CONFIG_BT_HCIBTSDIO=m
> > CONFIG_BT_HCIUART=m
> > CONFIG_BT_HCIUART_H4=y
> > CONFIG_BT_HCIUART_BCSP=y
> > CONFIG_BT_HCIUART_LL=y
> > CONFIG_BT_HCIBCM203X=m
> > CONFIG_BT_HCIBPA10X=m
> > CONFIG_BT_HCIBFUSB=m
> > CONFIG_BT_HCIDTL1=m
> > CONFIG_BT_HCIBT3C=m
> > CONFIG_BT_HCIBLUECARD=m
> > CONFIG_BT_HCIBTUART=m
> > CONFIG_BT_HCIVHCI=m
> > # CONFIG_AF_RXRPC is not set
> > CONFIG_FIB_RULES=y
> > CONFIG_WIRELESS=y
> > CONFIG_CFG80211=y
> > CONFIG_CFG80211_REG_DEBUG=y
> > CONFIG_WIRELESS_OLD_REGULATORY=y
> > CONFIG_WIRELESS_EXT=y
> > CONFIG_WIRELESS_EXT_SYSFS=y
> > CONFIG_LIB80211=y
> > CONFIG_LIB80211_CRYPT_WEP=m
> > CONFIG_LIB80211_CRYPT_CCMP=m
> > CONFIG_LIB80211_CRYPT_TKIP=m
> > CONFIG_LIB80211_DEBUG=y
> > CONFIG_MAC80211=y
> > 
> > #
> > # Rate control algorithm selection
> > #
> > CONFIG_MAC80211_RC_MINSTREL=y
> > # CONFIG_MAC80211_RC_DEFAULT_PID is not set
> > CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> > CONFIG_MAC80211_RC_DEFAULT="minstrel"
> > CONFIG_MAC80211_MESH=y
> > CONFIG_MAC80211_LEDS=y
> > CONFIG_MAC80211_DEBUGFS=y
> > # CONFIG_MAC80211_DEBUG_MENU is not set
> > # CONFIG_WIMAX is not set
> > CONFIG_RFKILL=m
> > CONFIG_RFKILL_INPUT=m
> > CONFIG_RFKILL_LEDS=y
> > # CONFIG_NET_9P is not set
> > 
> > #
> > # Device Drivers
> > #
> > 
> > #
> > # Generic Driver Options
> > #
> > CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> > CONFIG_STANDALONE=y
> > CONFIG_PREVENT_FIRMWARE_BUILD=y
> > CONFIG_FW_LOADER=y
> > CONFIG_FIRMWARE_IN_KERNEL=y
> > CONFIG_EXTRA_FIRMWARE=""
> > # CONFIG_DEBUG_DRIVER is not set
> > CONFIG_DEBUG_DEVRES=y
> > # CONFIG_SYS_HYPERVISOR is not set
> > CONFIG_CONNECTOR=y
> > CONFIG_PROC_EVENTS=y
> > # CONFIG_MTD is not set
> > # CONFIG_PARPORT is not set
> > CONFIG_PNP=y
> > CONFIG_PNP_DEBUG_MESSAGES=y
> > 
> > #
> > # Protocols
> > #
> > CONFIG_PNPACPI=y
> > CONFIG_BLK_DEV=y
> > # CONFIG_BLK_DEV_FD is not set
> > # CONFIG_BLK_CPQ_DA is not set
> > # CONFIG_BLK_CPQ_CISS_DA is not set
> > # CONFIG_BLK_DEV_DAC960 is not set
> > # CONFIG_BLK_DEV_UMEM is not set
> > # CONFIG_BLK_DEV_COW_COMMON is not set
> > CONFIG_BLK_DEV_LOOP=y
> > # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> > # CONFIG_BLK_DEV_NBD is not set
> > # CONFIG_BLK_DEV_SX8 is not set
> > # CONFIG_BLK_DEV_UB is not set
> > CONFIG_BLK_DEV_RAM=y
> > CONFIG_BLK_DEV_RAM_COUNT=16
> > CONFIG_BLK_DEV_RAM_SIZE=16384
> > # CONFIG_BLK_DEV_XIP is not set
> > CONFIG_CDROM_PKTCDVD=m
> > CONFIG_CDROM_PKTCDVD_BUFFERS=8
> > # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> > # CONFIG_ATA_OVER_ETH is not set
> > # CONFIG_VIRTIO_BLK is not set
> > # CONFIG_BLK_DEV_HD is not set
> > CONFIG_MISC_DEVICES=y
> > # CONFIG_IBM_ASM is not set
> > # CONFIG_PHANTOM is not set
> > # CONFIG_SGI_IOC4 is not set
> > CONFIG_TIFM_CORE=y
> > CONFIG_TIFM_7XX1=y
> > # CONFIG_ICS932S401 is not set
> > # CONFIG_ENCLOSURE_SERVICES is not set
> > # CONFIG_HP_ILO is not set
> > CONFIG_DELL_LAPTOP=m
> > # CONFIG_ISL29003 is not set
> > # CONFIG_C2PORT is not set
> > 
> > #
> > # EEPROM support
> > #
> > # CONFIG_EEPROM_AT24 is not set
> > # CONFIG_EEPROM_AT25 is not set
> > # CONFIG_EEPROM_LEGACY is not set
> > # CONFIG_EEPROM_93CX6 is not set
> > CONFIG_HAVE_IDE=y
> > # CONFIG_IDE is not set
> > 
> > #
> > # SCSI device support
> > #
> > # CONFIG_RAID_ATTRS is not set
> > CONFIG_SCSI=y
> > CONFIG_SCSI_DMA=y
> > # CONFIG_SCSI_TGT is not set
> > # CONFIG_SCSI_NETLINK is not set
> > CONFIG_SCSI_PROC_FS=y
> > 
> > #
> > # SCSI support type (disk, tape, CD-ROM)
> > #
> > CONFIG_BLK_DEV_SD=y
> > # CONFIG_CHR_DEV_ST is not set
> > # CONFIG_CHR_DEV_OSST is not set
> > CONFIG_BLK_DEV_SR=y
> > CONFIG_BLK_DEV_SR_VENDOR=y
> > CONFIG_CHR_DEV_SG=y
> > # CONFIG_CHR_DEV_SCH is not set
> > 
> > #
> > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> > #
> > # CONFIG_SCSI_MULTI_LUN is not set
> > CONFIG_SCSI_CONSTANTS=y
> > # CONFIG_SCSI_LOGGING is not set
> > # CONFIG_SCSI_SCAN_ASYNC is not set
> > CONFIG_SCSI_WAIT_SCAN=m
> > 
> > #
> > # SCSI Transports
> > #
> > CONFIG_SCSI_SPI_ATTRS=y
> > # CONFIG_SCSI_FC_ATTRS is not set
> > CONFIG_SCSI_ISCSI_ATTRS=y
> > # CONFIG_SCSI_SAS_ATTRS is not set
> > # CONFIG_SCSI_SAS_LIBSAS is not set
> > # CONFIG_SCSI_SRP_ATTRS is not set
> > # CONFIG_SCSI_LOWLEVEL is not set
> > # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
> > # CONFIG_SCSI_DH is not set
> > # CONFIG_SCSI_OSD_INITIATOR is not set
> > CONFIG_ATA=y
> > # CONFIG_ATA_NONSTANDARD is not set
> > CONFIG_ATA_ACPI=y
> > CONFIG_SATA_PMP=y
> > CONFIG_SATA_AHCI=y
> > # CONFIG_SATA_SIL24 is not set
> > CONFIG_ATA_SFF=y
> > # CONFIG_SATA_SVW is not set
> > CONFIG_ATA_PIIX=y
> > # CONFIG_SATA_MV is not set
> > # CONFIG_SATA_NV is not set
> > # CONFIG_PDC_ADMA is not set
> > # CONFIG_SATA_QSTOR is not set
> > # CONFIG_SATA_PROMISE is not set
> > # CONFIG_SATA_SX4 is not set
> > # CONFIG_SATA_SIL is not set
> > # CONFIG_SATA_SIS is not set
> > # CONFIG_SATA_ULI is not set
> > # CONFIG_SATA_VIA is not set
> > # CONFIG_SATA_VITESSE is not set
> > # CONFIG_SATA_INIC162X is not set
> > # CONFIG_PATA_ACPI is not set
> > # CONFIG_PATA_ALI is not set
> > # CONFIG_PATA_AMD is not set
> > # CONFIG_PATA_ARTOP is not set
> > # CONFIG_PATA_ATIIXP is not set
> > # CONFIG_PATA_CMD640_PCI is not set
> > # CONFIG_PATA_CMD64X is not set
> > # CONFIG_PATA_CS5520 is not set
> > # CONFIG_PATA_CS5530 is not set
> > # CONFIG_PATA_CS5535 is not set
> > # CONFIG_PATA_CS5536 is not set
> > # CONFIG_PATA_CYPRESS is not set
> > # CONFIG_PATA_EFAR is not set
> > CONFIG_ATA_GENERIC=y
> > # CONFIG_PATA_HPT366 is not set
> > # CONFIG_PATA_HPT37X is not set
> > # CONFIG_PATA_HPT3X2N is not set
> > # CONFIG_PATA_HPT3X3 is not set
> > # CONFIG_PATA_IT821X is not set
> > # CONFIG_PATA_IT8213 is not set
> > # CONFIG_PATA_JMICRON is not set
> > # CONFIG_PATA_TRIFLEX is not set
> > # CONFIG_PATA_MARVELL is not set
> > CONFIG_PATA_MPIIX=y
> > # CONFIG_PATA_OLDPIIX is not set
> > # CONFIG_PATA_NETCELL is not set
> > # CONFIG_PATA_NINJA32 is not set
> > # CONFIG_PATA_NS87410 is not set
> > # CONFIG_PATA_NS87415 is not set
> > # CONFIG_PATA_OPTI is not set
> > # CONFIG_PATA_OPTIDMA is not set
> > # CONFIG_PATA_PCMCIA is not set
> > # CONFIG_PATA_PDC_OLD is not set
> > # CONFIG_PATA_RADISYS is not set
> > # CONFIG_PATA_RZ1000 is not set
> > # CONFIG_PATA_SC1200 is not set
> > # CONFIG_PATA_SERVERWORKS is not set
> > # CONFIG_PATA_PDC2027X is not set
> > # CONFIG_PATA_SIL680 is not set
> > # CONFIG_PATA_SIS is not set
> > # CONFIG_PATA_VIA is not set
> > # CONFIG_PATA_WINBOND is not set
> > CONFIG_PATA_SCH=y
> > CONFIG_MD=y
> > CONFIG_BLK_DEV_MD=y
> > CONFIG_MD_AUTODETECT=y
> > # CONFIG_MD_LINEAR is not set
> > # CONFIG_MD_RAID0 is not set
> > # CONFIG_MD_RAID1 is not set
> > # CONFIG_MD_RAID10 is not set
> > # CONFIG_MD_RAID456 is not set
> > # CONFIG_MD_MULTIPATH is not set
> > # CONFIG_MD_FAULTY is not set
> > CONFIG_BLK_DEV_DM=y
> > # CONFIG_DM_DEBUG is not set
> > # CONFIG_DM_CRYPT is not set
> > # CONFIG_DM_SNAPSHOT is not set
> > CONFIG_DM_MIRROR=y
> > CONFIG_DM_ZERO=y
> > # CONFIG_DM_MULTIPATH is not set
> > # CONFIG_DM_DELAY is not set
> > # CONFIG_DM_UEVENT is not set
> > # CONFIG_FUSION is not set
> > 
> > #
> > # IEEE 1394 (FireWire) support
> > #
> > 
> > #
> > # Enable only one of the two stacks, unless you know what you are doing
> > #
> > CONFIG_FIREWIRE=m
> > CONFIG_FIREWIRE_OHCI=m
> > CONFIG_FIREWIRE_OHCI_DEBUG=y
> > CONFIG_FIREWIRE_SBP2=m
> > CONFIG_IEEE1394=m
> > CONFIG_IEEE1394_OHCI1394=m
> > # CONFIG_IEEE1394_PCILYNX is not set
> > CONFIG_IEEE1394_SBP2=m
> > # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
> > # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
> > # CONFIG_IEEE1394_ETH1394 is not set
> > # CONFIG_IEEE1394_RAWIO is not set
> > # CONFIG_IEEE1394_VIDEO1394 is not set
> > # CONFIG_IEEE1394_DV1394 is not set
> > # CONFIG_IEEE1394_VERBOSEDEBUG is not set
> > # CONFIG_I2O is not set
> > # CONFIG_MACINTOSH_DRIVERS is not set
> > CONFIG_NETDEVICES=y
> > CONFIG_COMPAT_NET_DEV_OPS=y
> > # CONFIG_IFB is not set
> > # CONFIG_DUMMY is not set
> > # CONFIG_BONDING is not set
> > # CONFIG_MACVLAN is not set
> > # CONFIG_EQUALIZER is not set
> > CONFIG_TUN=m
> > # CONFIG_VETH is not set
> > # CONFIG_NET_SB1000 is not set
> > # CONFIG_ARCNET is not set
> > CONFIG_PHYLIB=y
> > 
> > #
> > # MII PHY device drivers
> > #
> > # CONFIG_MARVELL_PHY is not set
> > # CONFIG_DAVICOM_PHY is not set
> > # CONFIG_QSEMI_PHY is not set
> > # CONFIG_LXT_PHY is not set
> > # CONFIG_CICADA_PHY is not set
> > # CONFIG_VITESSE_PHY is not set
> > # CONFIG_SMSC_PHY is not set
> > CONFIG_BROADCOM_PHY=y
> > # CONFIG_ICPLUS_PHY is not set
> > # CONFIG_REALTEK_PHY is not set
> > # CONFIG_NATIONAL_PHY is not set
> > CONFIG_STE10XP=m
> > # CONFIG_LSI_ET1011C_PHY is not set
> > # CONFIG_FIXED_PHY is not set
> > # CONFIG_MDIO_BITBANG is not set
> > # CONFIG_NET_ETHERNET is not set
> > CONFIG_NETDEV_1000=y
> > # CONFIG_ACENIC is not set
> > # CONFIG_DL2K is not set
> > # CONFIG_E1000 is not set
> > # CONFIG_E1000E is not set
> > # CONFIG_IP1000 is not set
> > # CONFIG_IGB is not set
> > # CONFIG_IGBVF is not set
> > # CONFIG_NS83820 is not set
> > # CONFIG_HAMACHI is not set
> > # CONFIG_YELLOWFIN is not set
> > # CONFIG_R8169 is not set
> > # CONFIG_SIS190 is not set
> > # CONFIG_SKGE is not set
> > CONFIG_SKY2=y
> > # CONFIG_SKY2_DEBUG is not set
> > # CONFIG_VIA_VELOCITY is not set
> > CONFIG_TIGON3=y
> > CONFIG_BNX2=y
> > # CONFIG_QLA3XXX is not set
> > # CONFIG_ATL1 is not set
> > # CONFIG_ATL1E is not set
> > # CONFIG_ATL1C is not set
> > # CONFIG_JME is not set
> > # CONFIG_NETDEV_10000 is not set
> > # CONFIG_TR is not set
> > 
> > #
> > # Wireless LAN
> > #
> > # CONFIG_WLAN_PRE80211 is not set
> > CONFIG_WLAN_80211=y
> > # CONFIG_PCMCIA_RAYCS is not set
> > # CONFIG_LIBERTAS is not set
> > # CONFIG_LIBERTAS_THINFIRM is not set
> > # CONFIG_AIRO is not set
> > # CONFIG_ATMEL is not set
> > # CONFIG_AT76C50X_USB is not set
> > # CONFIG_AIRO_CS is not set
> > # CONFIG_PCMCIA_WL3501 is not set
> > # CONFIG_PRISM54 is not set
> > # CONFIG_USB_ZD1201 is not set
> > # CONFIG_USB_NET_RNDIS_WLAN is not set
> > # CONFIG_RTL8180 is not set
> > # CONFIG_RTL8187 is not set
> > # CONFIG_ADM8211 is not set
> > # CONFIG_MAC80211_HWSIM is not set
> > # CONFIG_MWL8K is not set
> > # CONFIG_P54_COMMON is not set
> > # CONFIG_ATH5K is not set
> > # CONFIG_ATH9K is not set
> > # CONFIG_AR9170_USB is not set
> > # CONFIG_IPW2100 is not set
> > # CONFIG_IPW2200 is not set
> > # CONFIG_IWLWIFI is not set
> > CONFIG_HOSTAP=m
> > # CONFIG_HOSTAP_FIRMWARE is not set
> > # CONFIG_HOSTAP_PLX is not set
> > # CONFIG_HOSTAP_PCI is not set
> > # CONFIG_HOSTAP_CS is not set
> > # CONFIG_B43 is not set
> > # CONFIG_B43LEGACY is not set
> > # CONFIG_ZD1211RW is not set
> > # CONFIG_RT2X00 is not set
> > # CONFIG_HERMES is not set
> > 
> > #
> > # Enable WiMAX (Networking options) to see the WiMAX drivers
> > #
> > 
> > #
> > # USB Network Adapters
> > #
> > # CONFIG_USB_CATC is not set
> > # CONFIG_USB_KAWETH is not set
> > # CONFIG_USB_PEGASUS is not set
> > # CONFIG_USB_RTL8150 is not set
> > # CONFIG_USB_USBNET is not set
> > # CONFIG_USB_HSO is not set
> > CONFIG_NET_PCMCIA=y
> > # CONFIG_PCMCIA_3C589 is not set
> > # CONFIG_PCMCIA_3C574 is not set
> > # CONFIG_PCMCIA_FMVJ18X is not set
> > # CONFIG_PCMCIA_PCNET is not set
> > # CONFIG_PCMCIA_NMCLAN is not set
> > # CONFIG_PCMCIA_SMC91C92 is not set
> > # CONFIG_PCMCIA_XIRC2PS is not set
> > # CONFIG_PCMCIA_AXNET is not set
> > # CONFIG_WAN is not set
> > # CONFIG_FDDI is not set
> > # CONFIG_HIPPI is not set
> > CONFIG_PPP=y
> > CONFIG_PPP_MULTILINK=y
> > CONFIG_PPP_FILTER=y
> > CONFIG_PPP_ASYNC=y
> > CONFIG_PPP_SYNC_TTY=y
> > CONFIG_PPP_DEFLATE=y
> > CONFIG_PPP_BSDCOMP=y
> > CONFIG_PPP_MPPE=y
> > CONFIG_PPPOE=y
> > CONFIG_PPPOL2TP=y
> > CONFIG_SLIP=y
> > CONFIG_SLIP_COMPRESSED=y
> > CONFIG_SLHC=y
> > CONFIG_SLIP_SMART=y
> > CONFIG_SLIP_MODE_SLIP6=y
> > # CONFIG_NET_FC is not set
> > CONFIG_NETCONSOLE=y
> > CONFIG_NETCONSOLE_DYNAMIC=y
> > CONFIG_NETPOLL=y
> > CONFIG_NETPOLL_TRAP=y
> > CONFIG_NET_POLL_CONTROLLER=y
> > # CONFIG_VIRTIO_NET is not set
> > # CONFIG_ISDN is not set
> > # CONFIG_PHONE is not set
> > 
> > #
> > # Input device support
> > #
> > CONFIG_INPUT=y
> > CONFIG_INPUT_FF_MEMLESS=y
> > CONFIG_INPUT_POLLDEV=y
> > 
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_MOUSEDEV=y
> > # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > # CONFIG_INPUT_JOYDEV is not set
> > CONFIG_INPUT_EVDEV=y
> > # CONFIG_INPUT_EVBUG is not set
> > 
> > #
> > # Input Device Drivers
> > #
> > CONFIG_INPUT_KEYBOARD=y
> > CONFIG_KEYBOARD_ATKBD=y
> > # CONFIG_KEYBOARD_SUNKBD is not set
> > # CONFIG_KEYBOARD_LKKBD is not set
> > # CONFIG_KEYBOARD_XTKBD is not set
> > # CONFIG_KEYBOARD_NEWTON is not set
> > # CONFIG_KEYBOARD_STOWAWAY is not set
> > # CONFIG_KEYBOARD_GPIO is not set
> > CONFIG_INPUT_MOUSE=y
> > CONFIG_MOUSE_PS2=y
> > CONFIG_MOUSE_PS2_ALPS=y
> > CONFIG_MOUSE_PS2_LOGIPS2PP=y
> > CONFIG_MOUSE_PS2_SYNAPTICS=y
> > CONFIG_MOUSE_PS2_LIFEBOOK=y
> > CONFIG_MOUSE_PS2_TRACKPOINT=y
> > # CONFIG_MOUSE_PS2_ELANTECH is not set
> > # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> > # CONFIG_MOUSE_SERIAL is not set
> > # CONFIG_MOUSE_APPLETOUCH is not set
> > # CONFIG_MOUSE_BCM5974 is not set
> > # CONFIG_MOUSE_VSXXXAA is not set
> > # CONFIG_MOUSE_GPIO is not set
> > # CONFIG_INPUT_JOYSTICK is not set
> > # CONFIG_INPUT_TABLET is not set
> > # CONFIG_INPUT_TOUCHSCREEN is not set
> > CONFIG_INPUT_MISC=y
> > CONFIG_INPUT_PCSPKR=m
> > # CONFIG_INPUT_APANEL is not set
> > CONFIG_INPUT_WISTRON_BTNS=m
> > # CONFIG_INPUT_ATLAS_BTNS is not set
> > # CONFIG_INPUT_ATI_REMOTE is not set
> > # CONFIG_INPUT_ATI_REMOTE2 is not set
> > # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> > # CONFIG_INPUT_POWERMATE is not set
> > # CONFIG_INPUT_YEALINK is not set
> > # CONFIG_INPUT_CM109 is not set
> > # CONFIG_INPUT_UINPUT is not set
> > # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
> > 
> > #
> > # Hardware I/O ports
> > #
> > CONFIG_SERIO=y
> > CONFIG_SERIO_I8042=y
> > CONFIG_SERIO_SERPORT=y
> > # CONFIG_SERIO_CT82C710 is not set
> > # CONFIG_SERIO_PCIPS2 is not set
> > CONFIG_SERIO_LIBPS2=y
> > # CONFIG_SERIO_RAW is not set
> > # CONFIG_GAMEPORT is not set
> > 
> > #
> > # Character devices
> > #
> > CONFIG_VT=y
> > CONFIG_CONSOLE_TRANSLATIONS=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_HW_CONSOLE=y
> > CONFIG_VT_HW_CONSOLE_BINDING=y
> > CONFIG_DEVKMEM=y
> > CONFIG_SERIAL_NONSTANDARD=y
> > # CONFIG_COMPUTONE is not set
> > # CONFIG_ROCKETPORT is not set
> > # CONFIG_CYCLADES is not set
> > # CONFIG_DIGIEPCA is not set
> > # CONFIG_MOXA_INTELLIO is not set
> > # CONFIG_MOXA_SMARTIO is not set
> > # CONFIG_ISI is not set
> > # CONFIG_SYNCLINK is not set
> > # CONFIG_SYNCLINKMP is not set
> > # CONFIG_SYNCLINK_GT is not set
> > # CONFIG_N_HDLC is not set
> > # CONFIG_RISCOM8 is not set
> > # CONFIG_SPECIALIX is not set
> > # CONFIG_SX is not set
> > # CONFIG_RIO is not set
> > # CONFIG_STALDRV is not set
> > # CONFIG_NOZOMI is not set
> > 
> > #
> > # Serial drivers
> > #
> > CONFIG_SERIAL_8250=y
> > CONFIG_SERIAL_8250_CONSOLE=y
> > CONFIG_FIX_EARLYCON_MEM=y
> > CONFIG_SERIAL_8250_PCI=y
> > CONFIG_SERIAL_8250_PNP=y
> > # CONFIG_SERIAL_8250_CS is not set
> > CONFIG_SERIAL_8250_NR_UARTS=32
> > CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> > CONFIG_SERIAL_8250_EXTENDED=y
> > CONFIG_SERIAL_8250_MANY_PORTS=y
> > CONFIG_SERIAL_8250_SHARE_IRQ=y
> > CONFIG_SERIAL_8250_DETECT_IRQ=y
> > CONFIG_SERIAL_8250_RSA=y
> > 
> > #
> > # Non-8250 serial port support
> > #
> > # CONFIG_SERIAL_MAX3100 is not set
> > CONFIG_SERIAL_CORE=y
> > CONFIG_SERIAL_CORE_CONSOLE=y
> > # CONFIG_SERIAL_JSM is not set
> > CONFIG_UNIX98_PTYS=y
> > # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> > # CONFIG_LEGACY_PTYS is not set
> > CONFIG_HVC_DRIVER=y
> > CONFIG_VIRTIO_CONSOLE=y
> > # CONFIG_IPMI_HANDLER is not set
> > CONFIG_HW_RANDOM=y
> > # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> > CONFIG_HW_RANDOM_INTEL=y
> > # CONFIG_HW_RANDOM_AMD is not set
> > # CONFIG_HW_RANDOM_GEODE is not set
> > # CONFIG_HW_RANDOM_VIA is not set
> > # CONFIG_HW_RANDOM_VIRTIO is not set
> > CONFIG_NVRAM=y
> > # CONFIG_R3964 is not set
> > # CONFIG_APPLICOM is not set
> > # CONFIG_SONYPI is not set
> > 
> > #
> > # PCMCIA character devices
> > #
> > # CONFIG_SYNCLINK_CS is not set
> > # CONFIG_CARDMAN_4000 is not set
> > # CONFIG_CARDMAN_4040 is not set
> > # CONFIG_IPWIRELESS is not set
> > # CONFIG_MWAVE is not set
> > # CONFIG_PC8736x_GPIO is not set
> > # CONFIG_NSC_GPIO is not set
> > # CONFIG_CS5535_GPIO is not set
> > # CONFIG_RAW_DRIVER is not set
> > CONFIG_HPET=y
> > CONFIG_HPET_MMAP=y
> > CONFIG_HANGCHECK_TIMER=y
> > # CONFIG_TCG_TPM is not set
> > # CONFIG_TELCLOCK is not set
> > CONFIG_DEVPORT=y
> > CONFIG_I2C=y
> > CONFIG_I2C_BOARDINFO=y
> > CONFIG_I2C_CHARDEV=y
> > CONFIG_I2C_HELPER_AUTO=y
> > CONFIG_I2C_ALGOBIT=y
> > 
> > #
> > # I2C Hardware Bus support
> > #
> > 
> > #
> > # PC SMBus host controller drivers
> > #
> > # CONFIG_I2C_ALI1535 is not set
> > # CONFIG_I2C_ALI1563 is not set
> > # CONFIG_I2C_ALI15X3 is not set
> > # CONFIG_I2C_AMD756 is not set
> > # CONFIG_I2C_AMD8111 is not set
> > CONFIG_I2C_I801=y
> > CONFIG_I2C_ISCH=y
> > CONFIG_I2C_PIIX4=y
> > # CONFIG_I2C_NFORCE2 is not set
> > # CONFIG_I2C_SIS5595 is not set
> > # CONFIG_I2C_SIS630 is not set
> > # CONFIG_I2C_SIS96X is not set
> > # CONFIG_I2C_VIA is not set
> > # CONFIG_I2C_VIAPRO is not set
> > 
> > #
> > # I2C system bus drivers (mostly embedded / system-on-chip)
> > #
> > # CONFIG_I2C_GPIO is not set
> > # CONFIG_I2C_OCORES is not set
> > # CONFIG_I2C_SIMTEC is not set
> > 
> > #
> > # External I2C/SMBus adapter drivers
> > #
> > # CONFIG_I2C_PARPORT_LIGHT is not set
> > # CONFIG_I2C_TAOS_EVM is not set
> > # CONFIG_I2C_TINY_USB is not set
> > 
> > #
> > # Graphics adapter I2C/DDC channel drivers
> > #
> > # CONFIG_I2C_VOODOO3 is not set
> > 
> > #
> > # Other I2C/SMBus bus drivers
> > #
> > # CONFIG_I2C_PCA_PLATFORM is not set
> > # CONFIG_I2C_STUB is not set
> > # CONFIG_SCx200_ACB is not set
> > 
> > #
> > # Miscellaneous I2C Chip support
> > #
> > # CONFIG_DS1682 is not set
> > # CONFIG_SENSORS_PCF8574 is not set
> > # CONFIG_PCF8575 is not set
> > # CONFIG_SENSORS_PCA9539 is not set
> > # CONFIG_SENSORS_MAX6875 is not set
> > # CONFIG_SENSORS_TSL2550 is not set
> > # CONFIG_I2C_DEBUG_CORE is not set
> > # CONFIG_I2C_DEBUG_ALGO is not set
> > # CONFIG_I2C_DEBUG_BUS is not set
> > # CONFIG_I2C_DEBUG_CHIP is not set
> > CONFIG_SPI=y
> > # CONFIG_SPI_DEBUG is not set
> > CONFIG_SPI_MASTER=y
> > 
> > #
> > # SPI Master Controller Drivers
> > #
> > # CONFIG_SPI_BITBANG is not set
> > # CONFIG_SPI_GPIO is not set
> > 
> > #
> > # SPI Protocol Masters
> > #
> > # CONFIG_SPI_SPIDEV is not set
> > # CONFIG_SPI_TLE62X0 is not set
> > CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> > CONFIG_GPIOLIB=y
> > # CONFIG_DEBUG_GPIO is not set
> > CONFIG_GPIO_SYSFS=y
> > 
> > #
> > # Memory mapped GPIO expanders:
> > #
> > 
> > #
> > # I2C GPIO expanders:
> > #
> > # CONFIG_GPIO_MAX732X is not set
> > # CONFIG_GPIO_PCA953X is not set
> > # CONFIG_GPIO_PCF857X is not set
> > 
> > #
> > # PCI GPIO expanders:
> > #
> > # CONFIG_GPIO_BT8XX is not set
> > 
> > #
> > # SPI GPIO expanders:
> > #
> > # CONFIG_GPIO_MAX7301 is not set
> > # CONFIG_GPIO_MCP23S08 is not set
> > # CONFIG_W1 is not set
> > CONFIG_POWER_SUPPLY=y
> > # CONFIG_POWER_SUPPLY_DEBUG is not set
> > # CONFIG_PDA_POWER is not set
> > # CONFIG_BATTERY_DS2760 is not set
> > # CONFIG_BATTERY_BQ27x00 is not set
> > CONFIG_HWMON=y
> > # CONFIG_HWMON_VID is not set
> > # CONFIG_SENSORS_ABITUGURU is not set
> > # CONFIG_SENSORS_ABITUGURU3 is not set
> > # CONFIG_SENSORS_AD7414 is not set
> > # CONFIG_SENSORS_AD7418 is not set
> > # CONFIG_SENSORS_ADCXX is not set
> > # CONFIG_SENSORS_ADM1021 is not set
> > # CONFIG_SENSORS_ADM1025 is not set
> > # CONFIG_SENSORS_ADM1026 is not set
> > # CONFIG_SENSORS_ADM1029 is not set
> > # CONFIG_SENSORS_ADM1031 is not set
> > # CONFIG_SENSORS_ADM9240 is not set
> > # CONFIG_SENSORS_ADT7462 is not set
> > # CONFIG_SENSORS_ADT7470 is not set
> > # CONFIG_SENSORS_ADT7473 is not set
> > # CONFIG_SENSORS_ADT7475 is not set
> > # CONFIG_SENSORS_K8TEMP is not set
> > # CONFIG_SENSORS_ASB100 is not set
> > # CONFIG_SENSORS_ATK0110 is not set
> > # CONFIG_SENSORS_ATXP1 is not set
> > # CONFIG_SENSORS_DS1621 is not set
> > # CONFIG_SENSORS_I5K_AMB is not set
> > # CONFIG_SENSORS_F71805F is not set
> > # CONFIG_SENSORS_F71882FG is not set
> > # CONFIG_SENSORS_F75375S is not set
> > # CONFIG_SENSORS_FSCHER is not set
> > # CONFIG_SENSORS_FSCPOS is not set
> > # CONFIG_SENSORS_FSCHMD is not set
> > # CONFIG_SENSORS_G760A is not set
> > # CONFIG_SENSORS_GL518SM is not set
> > # CONFIG_SENSORS_GL520SM is not set
> > CONFIG_SENSORS_CORETEMP=y
> > # CONFIG_SENSORS_IT87 is not set
> > # CONFIG_SENSORS_LM63 is not set
> > # CONFIG_SENSORS_LM70 is not set
> > # CONFIG_SENSORS_LM75 is not set
> > # CONFIG_SENSORS_LM77 is not set
> > # CONFIG_SENSORS_LM78 is not set
> > # CONFIG_SENSORS_LM80 is not set
> > # CONFIG_SENSORS_LM83 is not set
> > # CONFIG_SENSORS_LM85 is not set
> > # CONFIG_SENSORS_LM87 is not set
> > # CONFIG_SENSORS_LM90 is not set
> > # CONFIG_SENSORS_LM92 is not set
> > # CONFIG_SENSORS_LM93 is not set
> > # CONFIG_SENSORS_LTC4215 is not set
> > # CONFIG_SENSORS_LTC4245 is not set
> > # CONFIG_SENSORS_LM95241 is not set
> > # CONFIG_SENSORS_MAX1111 is not set
> > # CONFIG_SENSORS_MAX1619 is not set
> > # CONFIG_SENSORS_MAX6650 is not set
> > # CONFIG_SENSORS_PC87360 is not set
> > # CONFIG_SENSORS_PC87427 is not set
> > # CONFIG_SENSORS_PCF8591 is not set
> > # CONFIG_SENSORS_SHT15 is not set
> > # CONFIG_SENSORS_SIS5595 is not set
> > # CONFIG_SENSORS_DME1737 is not set
> > # CONFIG_SENSORS_SMSC47M1 is not set
> > # CONFIG_SENSORS_SMSC47M192 is not set
> > # CONFIG_SENSORS_SMSC47B397 is not set
> > # CONFIG_SENSORS_ADS7828 is not set
> > # CONFIG_SENSORS_THMC50 is not set
> > # CONFIG_SENSORS_VIA686A is not set
> > # CONFIG_SENSORS_VT1211 is not set
> > # CONFIG_SENSORS_VT8231 is not set
> > # CONFIG_SENSORS_W83781D is not set
> > # CONFIG_SENSORS_W83791D is not set
> > # CONFIG_SENSORS_W83792D is not set
> > # CONFIG_SENSORS_W83793 is not set
> > # CONFIG_SENSORS_W83L785TS is not set
> > # CONFIG_SENSORS_W83L786NG is not set
> > # CONFIG_SENSORS_W83627HF is not set
> > # CONFIG_SENSORS_W83627EHF is not set
> > # CONFIG_SENSORS_HDAPS is not set
> > # CONFIG_SENSORS_LIS3LV02D is not set
> > # CONFIG_SENSORS_APPLESMC is not set
> > # CONFIG_HWMON_DEBUG_CHIP is not set
> > CONFIG_THERMAL=y
> > # CONFIG_THERMAL_HWMON is not set
> > CONFIG_WATCHDOG=y
> > # CONFIG_WATCHDOG_NOWAYOUT is not set
> > 
> > #
> > # Watchdog Device Drivers
> > #
> > # CONFIG_SOFT_WATCHDOG is not set
> > # CONFIG_ACQUIRE_WDT is not set
> > # CONFIG_ADVANTECH_WDT is not set
> > # CONFIG_ALIM1535_WDT is not set
> > # CONFIG_ALIM7101_WDT is not set
> > # CONFIG_SC520_WDT is not set
> > # CONFIG_EUROTECH_WDT is not set
> > # CONFIG_IB700_WDT is not set
> > # CONFIG_IBMASR is not set
> > # CONFIG_WAFER_WDT is not set
> > CONFIG_I6300ESB_WDT=y
> > CONFIG_ITCO_WDT=y
> > CONFIG_ITCO_VENDOR_SUPPORT=y
> > # CONFIG_IT8712F_WDT is not set
> > # CONFIG_IT87_WDT is not set
> > # CONFIG_HP_WATCHDOG is not set
> > # CONFIG_SC1200_WDT is not set
> > # CONFIG_PC87413_WDT is not set
> > # CONFIG_60XX_WDT is not set
> > # CONFIG_SBC8360_WDT is not set
> > # CONFIG_SBC7240_WDT is not set
> > # CONFIG_CPU5_WDT is not set
> > # CONFIG_SMSC_SCH311X_WDT is not set
> > # CONFIG_SMSC37B787_WDT is not set
> > # CONFIG_W83627HF_WDT is not set
> > # CONFIG_W83697HF_WDT is not set
> > # CONFIG_W83697UG_WDT is not set
> > # CONFIG_W83877F_WDT is not set
> > # CONFIG_W83977F_WDT is not set
> > # CONFIG_MACHZ_WDT is not set
> > # CONFIG_SBC_EPX_C3_WATCHDOG is not set
> > 
> > #
> > # PCI-based Watchdog Cards
> > #
> > # CONFIG_PCIPCWATCHDOG is not set
> > # CONFIG_WDTPCI is not set
> > 
> > #
> > # USB-based Watchdog Cards
> > #
> > # CONFIG_USBPCWATCHDOG is not set
> > CONFIG_SSB_POSSIBLE=y
> > 
> > #
> > # Sonics Silicon Backplane
> > #
> > CONFIG_SSB=y
> > CONFIG_SSB_SPROM=y
> > CONFIG_SSB_PCIHOST_POSSIBLE=y
> > CONFIG_SSB_PCIHOST=y
> > # CONFIG_SSB_B43_PCI_BRIDGE is not set
> > CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
> > CONFIG_SSB_PCMCIAHOST=y
> > # CONFIG_SSB_DEBUG is not set
> > CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
> > CONFIG_SSB_DRIVER_PCICORE=y
> > 
> > #
> > # Multifunction device drivers
> > #
> > # CONFIG_MFD_CORE is not set
> > # CONFIG_MFD_SM501 is not set
> > # CONFIG_HTC_PASIC3 is not set
> > # CONFIG_UCB1400_CORE is not set
> > # CONFIG_TPS65010 is not set
> > # CONFIG_TWL4030_CORE is not set
> > # CONFIG_MFD_TMIO is not set
> > # CONFIG_PMIC_DA903X is not set
> > # CONFIG_MFD_WM8400 is not set
> > # CONFIG_MFD_WM8350_I2C is not set
> > # CONFIG_MFD_PCF50633 is not set
> > CONFIG_REGULATOR=y
> > # CONFIG_REGULATOR_DEBUG is not set
> > # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
> > # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
> > # CONFIG_REGULATOR_BQ24022 is not set
> > 
> > #
> > # Multimedia devices
> > #
> > 
> > #
> > # Multimedia core support
> > #
> > # CONFIG_VIDEO_DEV is not set
> > # CONFIG_DVB_CORE is not set
> > # CONFIG_VIDEO_MEDIA is not set
> > 
> > #
> > # Multimedia drivers
> > #
> > # CONFIG_DAB is not set
> > 
> > #
> > # Graphics support
> > #
> > CONFIG_AGP=y
> > # CONFIG_AGP_ALI is not set
> > # CONFIG_AGP_ATI is not set
> > # CONFIG_AGP_AMD is not set
> > CONFIG_AGP_AMD64=y
> > CONFIG_AGP_INTEL=y
> > # CONFIG_AGP_NVIDIA is not set
> > # CONFIG_AGP_SIS is not set
> > # CONFIG_AGP_SWORKS is not set
> > # CONFIG_AGP_VIA is not set
> > # CONFIG_AGP_EFFICEON is not set
> > CONFIG_DRM=y
> > # CONFIG_DRM_TDFX is not set
> > # CONFIG_DRM_R128 is not set
> > # CONFIG_DRM_RADEON is not set
> > # CONFIG_DRM_I810 is not set
> > # CONFIG_DRM_I830 is not set
> > CONFIG_DRM_I915=y
> > # CONFIG_DRM_I915_KMS is not set
> > # CONFIG_DRM_MGA is not set
> > # CONFIG_DRM_SIS is not set
> > # CONFIG_DRM_VIA is not set
> > # CONFIG_DRM_SAVAGE is not set
> > CONFIG_VGASTATE=m
> > CONFIG_VIDEO_OUTPUT_CONTROL=y
> > CONFIG_FB=y
> > # CONFIG_FIRMWARE_EDID is not set
> > CONFIG_FB_DDC=m
> > CONFIG_FB_BOOT_VESA_SUPPORT=y
> > CONFIG_FB_CFB_FILLRECT=y
> > CONFIG_FB_CFB_COPYAREA=y
> > CONFIG_FB_CFB_IMAGEBLIT=y
> > # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> > # CONFIG_FB_SYS_FILLRECT is not set
> > # CONFIG_FB_SYS_COPYAREA is not set
> > # CONFIG_FB_SYS_IMAGEBLIT is not set
> > # CONFIG_FB_FOREIGN_ENDIAN is not set
> > # CONFIG_FB_SYS_FOPS is not set
> > # CONFIG_FB_SVGALIB is not set
> > # CONFIG_FB_MACMODES is not set
> > # CONFIG_FB_BACKLIGHT is not set
> > CONFIG_FB_MODE_HELPERS=y
> > CONFIG_FB_TILEBLITTING=y
> > 
> > #
> > # Frame buffer hardware drivers
> > #
> > # CONFIG_FB_CIRRUS is not set
> > # CONFIG_FB_PM2 is not set
> > # CONFIG_FB_CYBER2000 is not set
> > # CONFIG_FB_ARC is not set
> > # CONFIG_FB_ASILIANT is not set
> > # CONFIG_FB_IMSTT is not set
> > # CONFIG_FB_VGA16 is not set
> > # CONFIG_FB_UVESA is not set
> > CONFIG_FB_VESA=y
> > # CONFIG_FB_EFI is not set
> > # CONFIG_FB_N411 is not set
> > # CONFIG_FB_HGA is not set
> > # CONFIG_FB_S1D13XXX is not set
> > # CONFIG_FB_NVIDIA is not set
> > # CONFIG_FB_RIVA is not set
> > CONFIG_FB_I810=m
> > CONFIG_FB_I810_GTF=y
> > CONFIG_FB_I810_I2C=y
> > # CONFIG_FB_LE80578 is not set
> > CONFIG_FB_INTEL=m
> > CONFIG_FB_INTEL_DEBUG=y
> > CONFIG_FB_INTEL_I2C=y
> > # CONFIG_FB_MATROX is not set
> > # CONFIG_FB_RADEON is not set
> > # CONFIG_FB_ATY128 is not set
> > # CONFIG_FB_ATY is not set
> > # CONFIG_FB_S3 is not set
> > # CONFIG_FB_SAVAGE is not set
> > # CONFIG_FB_SIS is not set
> > # CONFIG_FB_VIA is not set
> > # CONFIG_FB_NEOMAGIC is not set
> > # CONFIG_FB_KYRO is not set
> > # CONFIG_FB_3DFX is not set
> > # CONFIG_FB_VOODOO1 is not set
> > # CONFIG_FB_VT8623 is not set
> > # CONFIG_FB_TRIDENT is not set
> > # CONFIG_FB_ARK is not set
> > # CONFIG_FB_PM3 is not set
> > # CONFIG_FB_CARMINE is not set
> > # CONFIG_FB_GEODE is not set
> > # CONFIG_FB_VIRTUAL is not set
> > # CONFIG_FB_METRONOME is not set
> > # CONFIG_FB_MB862XX is not set
> > # CONFIG_FB_BROADSHEET is not set
> > CONFIG_BACKLIGHT_LCD_SUPPORT=y
> > CONFIG_LCD_CLASS_DEVICE=y
> > CONFIG_LCD_LTV350QV=y
> > CONFIG_LCD_ILI9320=y
> > CONFIG_LCD_TDO24M=y
> > CONFIG_LCD_VGG2432A4=y
> > CONFIG_LCD_PLATFORM=y
> > CONFIG_BACKLIGHT_CLASS_DEVICE=y
> > CONFIG_BACKLIGHT_GENERIC=y
> > CONFIG_BACKLIGHT_PROGEAR=y
> > # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
> > # CONFIG_BACKLIGHT_SAHARA is not set
> > 
> > #
> > # Display device support
> > #
> > # CONFIG_DISPLAY_SUPPORT is not set
> > 
> > #
> > # Console display driver support
> > #
> > CONFIG_VGA_CONSOLE=y
> > CONFIG_VGACON_SOFT_SCROLLBACK=y
> > CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> > CONFIG_DUMMY_CONSOLE=y
> > CONFIG_FRAMEBUFFER_CONSOLE=y
> > # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> > # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> > # CONFIG_FONTS is not set
> > CONFIG_FONT_8x8=y
> > CONFIG_FONT_8x16=y
> > # CONFIG_LOGO is not set
> > CONFIG_SOUND=y
> > CONFIG_SOUND_OSS_CORE=y
> > CONFIG_SND=y
> > CONFIG_SND_TIMER=m
> > CONFIG_SND_PCM=m
> > CONFIG_SND_HWDEP=m
> > CONFIG_SND_JACK=y
> > CONFIG_SND_SEQUENCER=m
> > CONFIG_SND_SEQ_DUMMY=m
> > CONFIG_SND_OSSEMUL=y
> > CONFIG_SND_MIXER_OSS=m
> > CONFIG_SND_PCM_OSS=m
> > CONFIG_SND_PCM_OSS_PLUGINS=y
> > CONFIG_SND_SEQUENCER_OSS=y
> > # CONFIG_SND_HRTIMER is not set
> > CONFIG_SND_DYNAMIC_MINORS=y
> > CONFIG_SND_SUPPORT_OLD_API=y
> > CONFIG_SND_VERBOSE_PROCFS=y
> > # CONFIG_SND_VERBOSE_PRINTK is not set
> > # CONFIG_SND_DEBUG is not set
> > CONFIG_SND_VMASTER=y
> > CONFIG_SND_AC97_CODEC=m
> > CONFIG_SND_DRIVERS=y
> > # CONFIG_SND_PCSP is not set
> > # CONFIG_SND_DUMMY is not set
> > # CONFIG_SND_VIRMIDI is not set
> > # CONFIG_SND_MTPAV is not set
> > # CONFIG_SND_SERIAL_U16550 is not set
> > # CONFIG_SND_MPU401 is not set
> > # CONFIG_SND_AC97_POWER_SAVE is not set
> > CONFIG_SND_PCI=y
> > # CONFIG_SND_AD1889 is not set
> > # CONFIG_SND_ALS300 is not set
> > # CONFIG_SND_ALS4000 is not set
> > # CONFIG_SND_ALI5451 is not set
> > # CONFIG_SND_ATIIXP is not set
> > # CONFIG_SND_ATIIXP_MODEM is not set
> > # CONFIG_SND_AU8810 is not set
> > # CONFIG_SND_AU8820 is not set
> > # CONFIG_SND_AU8830 is not set
> > # CONFIG_SND_AW2 is not set
> > # CONFIG_SND_AZT3328 is not set
> > # CONFIG_SND_BT87X is not set
> > # CONFIG_SND_CA0106 is not set
> > # CONFIG_SND_CMIPCI is not set
> > # CONFIG_SND_OXYGEN is not set
> > # CONFIG_SND_CS4281 is not set
> > # CONFIG_SND_CS46XX is not set
> > # CONFIG_SND_CS5530 is not set
> > # CONFIG_SND_CS5535AUDIO is not set
> > # CONFIG_SND_DARLA20 is not set
> > # CONFIG_SND_GINA20 is not set
> > # CONFIG_SND_LAYLA20 is not set
> > # CONFIG_SND_DARLA24 is not set
> > # CONFIG_SND_GINA24 is not set
> > # CONFIG_SND_LAYLA24 is not set
> > # CONFIG_SND_MONA is not set
> > # CONFIG_SND_MIA is not set
> > # CONFIG_SND_ECHO3G is not set
> > # CONFIG_SND_INDIGO is not set
> > # CONFIG_SND_INDIGOIO is not set
> > # CONFIG_SND_INDIGODJ is not set
> > # CONFIG_SND_INDIGOIOX is not set
> > # CONFIG_SND_INDIGODJX is not set
> > # CONFIG_SND_EMU10K1 is not set
> > # CONFIG_SND_EMU10K1X is not set
> > # CONFIG_SND_ENS1370 is not set
> > # CONFIG_SND_ENS1371 is not set
> > # CONFIG_SND_ES1938 is not set
> > # CONFIG_SND_ES1968 is not set
> > # CONFIG_SND_FM801 is not set
> > CONFIG_SND_HDA_INTEL=m
> > CONFIG_SND_HDA_HWDEP=y
> > # CONFIG_SND_HDA_RECONFIG is not set
> > # CONFIG_SND_HDA_INPUT_BEEP is not set
> > CONFIG_SND_HDA_CODEC_REALTEK=y
> > CONFIG_SND_HDA_CODEC_ANALOG=y
> > CONFIG_SND_HDA_CODEC_SIGMATEL=y
> > CONFIG_SND_HDA_CODEC_VIA=y
> > CONFIG_SND_HDA_CODEC_ATIHDMI=y
> > CONFIG_SND_HDA_CODEC_NVHDMI=y
> > CONFIG_SND_HDA_CODEC_INTELHDMI=y
> > CONFIG_SND_HDA_ELD=y
> > CONFIG_SND_HDA_CODEC_CONEXANT=y
> > CONFIG_SND_HDA_CODEC_CMEDIA=y
> > CONFIG_SND_HDA_CODEC_SI3054=y
> > CONFIG_SND_HDA_GENERIC=y
> > CONFIG_SND_HDA_POWER_SAVE=y
> > CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
> > # CONFIG_SND_HDSP is not set
> > # CONFIG_SND_HDSPM is not set
> > # CONFIG_SND_HIFIER is not set
> > # CONFIG_SND_ICE1712 is not set
> > # CONFIG_SND_ICE1724 is not set
> > CONFIG_SND_INTEL8X0=m
> > # CONFIG_SND_INTEL8X0M is not set
> > # CONFIG_SND_KORG1212 is not set
> > # CONFIG_SND_MAESTRO3 is not set
> > # CONFIG_SND_MIXART is not set
> > # CONFIG_SND_NM256 is not set
> > # CONFIG_SND_PCXHR is not set
> > # CONFIG_SND_RIPTIDE is not set
> > # CONFIG_SND_RME32 is not set
> > # CONFIG_SND_RME96 is not set
> > # CONFIG_SND_RME9652 is not set
> > # CONFIG_SND_SIS7019 is not set
> > # CONFIG_SND_SONICVIBES is not set
> > # CONFIG_SND_TRIDENT is not set
> > # CONFIG_SND_VIA82XX is not set
> > # CONFIG_SND_VIA82XX_MODEM is not set
> > # CONFIG_SND_VIRTUOSO is not set
> > # CONFIG_SND_VX222 is not set
> > # CONFIG_SND_YMFPCI is not set
> > # CONFIG_SND_SPI is not set
> > # CONFIG_SND_USB is not set
> > # CONFIG_SND_PCMCIA is not set
> > # CONFIG_SND_SOC is not set
> > # CONFIG_SOUND_PRIME is not set
> > CONFIG_AC97_BUS=m
> > CONFIG_HID_SUPPORT=y
> > CONFIG_HID=y
> > CONFIG_HID_DEBUG=y
> > CONFIG_HIDRAW=y
> > 
> > #
> > # USB Input Devices
> > #
> > CONFIG_USB_HID=y
> > CONFIG_HID_PID=y
> > CONFIG_USB_HIDDEV=y
> > 
> > #
> > # Special HID drivers
> > #
> > CONFIG_HID_A4TECH=y
> > CONFIG_HID_APPLE=y
> > CONFIG_HID_BELKIN=y
> > CONFIG_HID_CHERRY=y
> > CONFIG_HID_CHICONY=y
> > CONFIG_HID_CYPRESS=y
> > # CONFIG_DRAGONRISE_FF is not set
> > CONFIG_HID_EZKEY=y
> > CONFIG_HID_KYE=y
> > CONFIG_HID_GYRATION=y
> > CONFIG_HID_KENSINGTON=y
> > CONFIG_HID_LOGITECH=y
> > CONFIG_LOGITECH_FF=y
> > # CONFIG_LOGIRUMBLEPAD2_FF is not set
> > CONFIG_HID_MICROSOFT=y
> > CONFIG_HID_MONTEREY=y
> > CONFIG_HID_NTRIG=y
> > CONFIG_HID_PANTHERLORD=y
> > # CONFIG_PANTHERLORD_FF is not set
> > CONFIG_HID_PETALYNX=y
> > CONFIG_HID_SAMSUNG=y
> > CONFIG_HID_SONY=y
> > CONFIG_HID_SUNPLUS=y
> > # CONFIG_GREENASIA_FF is not set
> > CONFIG_HID_TOPSEED=y
> > # CONFIG_THRUSTMASTER_FF is not set
> > # CONFIG_ZEROPLUS_FF is not set
> > CONFIG_USB_SUPPORT=y
> > CONFIG_USB_ARCH_HAS_HCD=y
> > CONFIG_USB_ARCH_HAS_OHCI=y
> > CONFIG_USB_ARCH_HAS_EHCI=y
> > CONFIG_USB=y
> > # CONFIG_USB_DEBUG is not set
> > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> > 
> > #
> > # Miscellaneous USB options
> > #
> > # CONFIG_USB_DEVICEFS is not set
> > # CONFIG_USB_DEVICE_CLASS is not set
> > # CONFIG_USB_DYNAMIC_MINORS is not set
> > CONFIG_USB_SUSPEND=y
> > # CONFIG_USB_OTG is not set
> > # CONFIG_USB_MON is not set
> > # CONFIG_USB_WUSB is not set
> > # CONFIG_USB_WUSB_CBAF is not set
> > 
> > #
> > # USB Host Controller Drivers
> > #
> > # CONFIG_USB_C67X00_HCD is not set
> > CONFIG_USB_EHCI_HCD=y
> > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> > # CONFIG_USB_EHCI_TT_NEWSCHED is not set
> > # CONFIG_USB_OXU210HP_HCD is not set
> > # CONFIG_USB_ISP116X_HCD is not set
> > # CONFIG_USB_ISP1760_HCD is not set
> > # CONFIG_USB_OHCI_HCD is not set
> > CONFIG_USB_UHCI_HCD=y
> > # CONFIG_USB_SL811_HCD is not set
> > # CONFIG_USB_R8A66597_HCD is not set
> > # CONFIG_USB_WHCI_HCD is not set
> > # CONFIG_USB_HWA_HCD is not set
> > 
> > #
> > # USB Device Class drivers
> > #
> > # CONFIG_USB_ACM is not set
> > # CONFIG_USB_PRINTER is not set
> > # CONFIG_USB_WDM is not set
> > # CONFIG_USB_TMC is not set
> > 
> > #
> > # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> > #
> > 
> > #
> > # also be needed; see USB_STORAGE Help for more info
> > #
> > CONFIG_USB_STORAGE=y
> > # CONFIG_USB_STORAGE_DEBUG is not set
> > # CONFIG_USB_STORAGE_DATAFAB is not set
> > # CONFIG_USB_STORAGE_FREECOM is not set
> > # CONFIG_USB_STORAGE_ISD200 is not set
> > # CONFIG_USB_STORAGE_USBAT is not set
> > # CONFIG_USB_STORAGE_SDDR09 is not set
> > # CONFIG_USB_STORAGE_SDDR55 is not set
> > # CONFIG_USB_STORAGE_JUMPSHOT is not set
> > # CONFIG_USB_STORAGE_ALAUDA is not set
> > # CONFIG_USB_STORAGE_ONETOUCH is not set
> > # CONFIG_USB_STORAGE_KARMA is not set
> > # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> > CONFIG_USB_LIBUSUAL=y
> > 
> > #
> > # USB Imaging devices
> > #
> > # CONFIG_USB_MDC800 is not set
> > # CONFIG_USB_MICROTEK is not set
> > 
> > #
> > # USB port drivers
> > #
> > # CONFIG_USB_SERIAL is not set
> > 
> > #
> > # USB Miscellaneous drivers
> > #
> > # CONFIG_USB_EMI62 is not set
> > # CONFIG_USB_EMI26 is not set
> > # CONFIG_USB_ADUTUX is not set
> > # CONFIG_USB_SEVSEG is not set
> > # CONFIG_USB_RIO500 is not set
> > # CONFIG_USB_LEGOTOWER is not set
> > # CONFIG_USB_LCD is not set
> > # CONFIG_USB_BERRY_CHARGE is not set
> > # CONFIG_USB_LED is not set
> > # CONFIG_USB_CYPRESS_CY7C63 is not set
> > # CONFIG_USB_CYTHERM is not set
> > # CONFIG_USB_IDMOUSE is not set
> > # CONFIG_USB_FTDI_ELAN is not set
> > # CONFIG_USB_APPLEDISPLAY is not set
> > # CONFIG_USB_SISUSBVGA is not set
> > # CONFIG_USB_LD is not set
> > # CONFIG_USB_TRANCEVIBRATOR is not set
> > # CONFIG_USB_IOWARRIOR is not set
> > # CONFIG_USB_ISIGHTFW is not set
> > # CONFIG_USB_VST is not set
> > # CONFIG_USB_GADGET is not set
> > 
> > #
> > # OTG and related infrastructure
> > #
> > # CONFIG_USB_GPIO_VBUS is not set
> > # CONFIG_NOP_USB_XCEIV is not set
> > # CONFIG_UWB is not set
> > CONFIG_MMC=y
> > # CONFIG_MMC_DEBUG is not set
> > # CONFIG_MMC_UNSAFE_RESUME is not set
> > 
> > #
> > # MMC/SD/SDIO Card Drivers
> > #
> > CONFIG_MMC_BLOCK=y
> > CONFIG_MMC_BLOCK_BOUNCE=y
> > # CONFIG_SDIO_UART is not set
> > CONFIG_MMC_TEST=y
> > 
> > #
> > # MMC/SD/SDIO Host Controller Drivers
> > #
> > CONFIG_MMC_SDHCI=y
> > CONFIG_MMC_SDHCI_PCI=y
> > # CONFIG_MMC_RICOH_MMC is not set
> > CONFIG_MMC_WBSD=y
> > CONFIG_MMC_TIFM_SD=y
> > CONFIG_MMC_SDRICOH_CS=y
> > # CONFIG_MEMSTICK is not set
> > CONFIG_NEW_LEDS=y
> > CONFIG_LEDS_CLASS=y
> > 
> > #
> > # LED drivers
> > #
> > # CONFIG_LEDS_ALIX2 is not set
> > # CONFIG_LEDS_PCA9532 is not set
> > # CONFIG_LEDS_GPIO is not set
> > # CONFIG_LEDS_LP5521 is not set
> > # CONFIG_LEDS_CLEVO_MAIL is not set
> > # CONFIG_LEDS_PCA955X is not set
> > # CONFIG_LEDS_DAC124S085 is not set
> > # CONFIG_LEDS_BD2802 is not set
> > 
> > #
> > # LED Triggers
> > #
> > CONFIG_LEDS_TRIGGERS=y
> > # CONFIG_LEDS_TRIGGER_TIMER is not set
> > # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
> > # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> > # CONFIG_LEDS_TRIGGER_GPIO is not set
> > # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
> > 
> > #
> > # iptables trigger is under Netfilter config (LED target)
> > #
> > # CONFIG_ACCESSIBILITY is not set
> > # CONFIG_INFINIBAND is not set
> > CONFIG_EDAC=y
> > 
> > #
> > # Reporting subsystems
> > #
> > # CONFIG_EDAC_DEBUG is not set
> > # CONFIG_EDAC_MM_EDAC is not set
> > CONFIG_RTC_LIB=y
> > CONFIG_RTC_CLASS=y
> > # CONFIG_RTC_HCTOSYS is not set
> > # CONFIG_RTC_DEBUG is not set
> > 
> > #
> > # RTC interfaces
> > #
> > CONFIG_RTC_INTF_SYSFS=y
> > CONFIG_RTC_INTF_PROC=y
> > CONFIG_RTC_INTF_DEV=y
> > # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> > # CONFIG_RTC_DRV_TEST is not set
> > 
> > #
> > # I2C RTC drivers
> > #
> > # CONFIG_RTC_DRV_DS1307 is not set
> > # CONFIG_RTC_DRV_DS1374 is not set
> > # CONFIG_RTC_DRV_DS1672 is not set
> > # CONFIG_RTC_DRV_MAX6900 is not set
> > # CONFIG_RTC_DRV_RS5C372 is not set
> > # CONFIG_RTC_DRV_ISL1208 is not set
> > # CONFIG_RTC_DRV_X1205 is not set
> > # CONFIG_RTC_DRV_PCF8563 is not set
> > # CONFIG_RTC_DRV_PCF8583 is not set
> > # CONFIG_RTC_DRV_M41T80 is not set
> > # CONFIG_RTC_DRV_S35390A is not set
> > # CONFIG_RTC_DRV_FM3130 is not set
> > # CONFIG_RTC_DRV_RX8581 is not set
> > 
> > #
> > # SPI RTC drivers
> > #
> > # CONFIG_RTC_DRV_M41T94 is not set
> > # CONFIG_RTC_DRV_DS1305 is not set
> > # CONFIG_RTC_DRV_DS1390 is not set
> > # CONFIG_RTC_DRV_MAX6902 is not set
> > # CONFIG_RTC_DRV_R9701 is not set
> > # CONFIG_RTC_DRV_RS5C348 is not set
> > # CONFIG_RTC_DRV_DS3234 is not set
> > 
> > #
> > # Platform RTC drivers
> > #
> > CONFIG_RTC_DRV_CMOS=y
> > # CONFIG_RTC_DRV_DS1286 is not set
> > # CONFIG_RTC_DRV_DS1511 is not set
> > # CONFIG_RTC_DRV_DS1553 is not set
> > # CONFIG_RTC_DRV_DS1742 is not set
> > # CONFIG_RTC_DRV_STK17TA8 is not set
> > # CONFIG_RTC_DRV_M48T86 is not set
> > # CONFIG_RTC_DRV_M48T35 is not set
> > # CONFIG_RTC_DRV_M48T59 is not set
> > # CONFIG_RTC_DRV_BQ4802 is not set
> > # CONFIG_RTC_DRV_V3020 is not set
> > 
> > #
> > # on-CPU RTC drivers
> > #
> > CONFIG_DMADEVICES=y
> > 
> > #
> > # DMA Devices
> > #
> > # CONFIG_INTEL_IOATDMA is not set
> > # CONFIG_AUXDISPLAY is not set
> > # CONFIG_UIO is not set
> > CONFIG_STAGING=y
> > # CONFIG_STAGING_EXCLUDE_BUILD is not set
> > # CONFIG_ET131X is not set
> > # CONFIG_SLICOSS is not set
> > # CONFIG_ME4000 is not set
> > # CONFIG_MEILHAUS is not set
> > # CONFIG_USB_IP_COMMON is not set
> > # CONFIG_W35UND is not set
> > # CONFIG_PRISM2_USB is not set
> > # CONFIG_ECHO is not set
> > # CONFIG_USB_ATMEL is not set
> > # CONFIG_AGNX is not set
> > # CONFIG_OTUS is not set
> > # CONFIG_RT2860 is not set
> > # CONFIG_RT2870 is not set
> > # CONFIG_RT3070 is not set
> > # CONFIG_COMEDI is not set
> > # CONFIG_ASUS_OLED is not set
> > # CONFIG_ALTERA_PCIE_CHDMA is not set
> > # CONFIG_RTL8187SE is not set
> > # CONFIG_INPUT_MIMIO is not set
> > # CONFIG_TRANZPORT is not set
> > # CONFIG_EPL is not set
> > 
> > #
> > # Android
> > #
> > # CONFIG_ANDROID is not set
> > # CONFIG_ANDROID_BINDER_IPC is not set
> > # CONFIG_ANDROID_LOGGER is not set
> > # CONFIG_ANDROID_RAM_CONSOLE is not set
> > # CONFIG_ANDROID_TIMED_GPIO is not set
> > # CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
> > # CONFIG_DST is not set
> > # CONFIG_POHMELFS is not set
> > # CONFIG_STLC45XX is not set
> > # CONFIG_B3DFG is not set
> > # CONFIG_IDE_PHISON is not set
> > # CONFIG_PLAN9AUTH is not set
> > # CONFIG_HECI is not set
> > # CONFIG_LINE6_USB is not set
> > CONFIG_X86_PLATFORM_DEVICES=y
> > # CONFIG_ACER_WMI is not set
> > # CONFIG_ASUS_LAPTOP is not set
> > CONFIG_DELL_WMI=m
> > # CONFIG_FUJITSU_LAPTOP is not set
> > # CONFIG_TC1100_WMI is not set
> > # CONFIG_HP_WMI is not set
> > # CONFIG_MSI_LAPTOP is not set
> > # CONFIG_PANASONIC_LAPTOP is not set
> > # CONFIG_COMPAL_LAPTOP is not set
> > # CONFIG_SONY_LAPTOP is not set
> > # CONFIG_THINKPAD_ACPI is not set
> > # CONFIG_INTEL_MENLOW is not set
> > # CONFIG_EEEPC_LAPTOP is not set
> > CONFIG_ACPI_WMI=m
> > # CONFIG_ACPI_ASUS is not set
> > # CONFIG_ACPI_TOSHIBA is not set
> > 
> > #
> > # Firmware Drivers
> > #
> > CONFIG_EDD=y
> > # CONFIG_EDD_OFF is not set
> > CONFIG_FIRMWARE_MEMMAP=y
> > CONFIG_EFI_VARS=y
> > CONFIG_DELL_RBU=y
> > CONFIG_DCDBAS=y
> > CONFIG_DMIID=y
> > # CONFIG_ISCSI_IBFT_FIND is not set
> > 
> > #
> > # File systems
> > #
> > CONFIG_EXT2_FS=m
> > CONFIG_EXT2_FS_XATTR=y
> > CONFIG_EXT2_FS_POSIX_ACL=y
> > CONFIG_EXT2_FS_SECURITY=y
> > CONFIG_EXT2_FS_XIP=y
> > CONFIG_EXT3_FS=y
> > # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> > CONFIG_EXT3_FS_XATTR=y
> > CONFIG_EXT3_FS_POSIX_ACL=y
> > CONFIG_EXT3_FS_SECURITY=y
> > # CONFIG_EXT4_FS is not set
> > CONFIG_FS_XIP=y
> > CONFIG_JBD=y
> > # CONFIG_JBD_DEBUG is not set
> > CONFIG_FS_MBCACHE=y
> > # CONFIG_REISERFS_FS is not set
> > # CONFIG_JFS_FS is not set
> > CONFIG_FS_POSIX_ACL=y
> > CONFIG_FILE_LOCKING=y
> > CONFIG_XFS_FS=m
> > CONFIG_XFS_QUOTA=y
> > CONFIG_XFS_POSIX_ACL=y
> > CONFIG_XFS_RT=y
> > # CONFIG_XFS_DEBUG is not set
> > # CONFIG_OCFS2_FS is not set
> > # CONFIG_BTRFS_FS is not set
> > CONFIG_DNOTIFY=y
> > CONFIG_INOTIFY=y
> > CONFIG_INOTIFY_USER=y
> > CONFIG_QUOTA=y
> > CONFIG_QUOTA_NETLINK_INTERFACE=y
> > # CONFIG_PRINT_QUOTA_WARNING is not set
> > CONFIG_QUOTA_TREE=y
> > # CONFIG_QFMT_V1 is not set
> > CONFIG_QFMT_V2=y
> > CONFIG_QUOTACTL=y
> > # CONFIG_AUTOFS_FS is not set
> > CONFIG_AUTOFS4_FS=y
> > # CONFIG_FUSE_FS is not set
> > CONFIG_GENERIC_ACL=y
> > 
> > #
> > # Caches
> > #
> > # CONFIG_FSCACHE is not set
> > 
> > #
> > # CD-ROM/DVD Filesystems
> > #
> > CONFIG_ISO9660_FS=y
> > CONFIG_JOLIET=y
> > CONFIG_ZISOFS=y
> > CONFIG_UDF_FS=m
> > CONFIG_UDF_NLS=y
> > 
> > #
> > # DOS/FAT/NT Filesystems
> > #
> > CONFIG_FAT_FS=y
> > CONFIG_MSDOS_FS=y
> > CONFIG_VFAT_FS=y
> > CONFIG_FAT_DEFAULT_CODEPAGE=437
> > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> > # CONFIG_NTFS_FS is not set
> > 
> > #
> > # Pseudo filesystems
> > #
> > CONFIG_PROC_FS=y
> > CONFIG_PROC_KCORE=y
> > CONFIG_PROC_VMCORE=y
> > CONFIG_PROC_SYSCTL=y
> > CONFIG_PROC_PAGE_MONITOR=y
> > CONFIG_SYSFS=y
> > CONFIG_TMPFS=y
> > CONFIG_TMPFS_POSIX_ACL=y
> > CONFIG_HUGETLBFS=y
> > CONFIG_HUGETLB_PAGE=y
> > CONFIG_CONFIGFS_FS=y
> > CONFIG_MISC_FILESYSTEMS=y
> > # CONFIG_ADFS_FS is not set
> > # CONFIG_AFFS_FS is not set
> > # CONFIG_ECRYPT_FS is not set
> > # CONFIG_HFS_FS is not set
> > # CONFIG_HFSPLUS_FS is not set
> > # CONFIG_BEFS_FS is not set
> > # CONFIG_BFS_FS is not set
> > # CONFIG_EFS_FS is not set
> > # CONFIG_CRAMFS is not set
> > # CONFIG_SQUASHFS is not set
> > # CONFIG_VXFS_FS is not set
> > # CONFIG_MINIX_FS is not set
> > # CONFIG_OMFS_FS is not set
> > # CONFIG_HPFS_FS is not set
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_ROMFS_FS is not set
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_UFS_FS is not set
> > # CONFIG_NILFS2_FS is not set
> > # CONFIG_NETWORK_FILESYSTEMS is not set
> > CONFIG_EXPORTFS=m
> > 
> > #
> > # Partition Types
> > #
> > CONFIG_PARTITION_ADVANCED=y
> > # CONFIG_ACORN_PARTITION is not set
> > # CONFIG_OSF_PARTITION is not set
> > # CONFIG_AMIGA_PARTITION is not set
> > # CONFIG_ATARI_PARTITION is not set
> > # CONFIG_MAC_PARTITION is not set
> > CONFIG_MSDOS_PARTITION=y
> > CONFIG_BSD_DISKLABEL=y
> > # CONFIG_MINIX_SUBPARTITION is not set
> > # CONFIG_SOLARIS_X86_PARTITION is not set
> > # CONFIG_UNIXWARE_DISKLABEL is not set
> > # CONFIG_LDM_PARTITION is not set
> > # CONFIG_SGI_PARTITION is not set
> > # CONFIG_ULTRIX_PARTITION is not set
> > # CONFIG_SUN_PARTITION is not set
> > # CONFIG_KARMA_PARTITION is not set
> > CONFIG_EFI_PARTITION=y
> > # CONFIG_SYSV68_PARTITION is not set
> > CONFIG_NLS=y
> > CONFIG_NLS_DEFAULT="utf8"
> > CONFIG_NLS_CODEPAGE_437=y
> > # CONFIG_NLS_CODEPAGE_737 is not set
> > # CONFIG_NLS_CODEPAGE_775 is not set
> > # CONFIG_NLS_CODEPAGE_850 is not set
> > # CONFIG_NLS_CODEPAGE_852 is not set
> > # CONFIG_NLS_CODEPAGE_855 is not set
> > # CONFIG_NLS_CODEPAGE_857 is not set
> > # CONFIG_NLS_CODEPAGE_860 is not set
> > # CONFIG_NLS_CODEPAGE_861 is not set
> > # CONFIG_NLS_CODEPAGE_862 is not set
> > # CONFIG_NLS_CODEPAGE_863 is not set
> > # CONFIG_NLS_CODEPAGE_864 is not set
> > # CONFIG_NLS_CODEPAGE_865 is not set
> > # CONFIG_NLS_CODEPAGE_866 is not set
> > # CONFIG_NLS_CODEPAGE_869 is not set
> > # CONFIG_NLS_CODEPAGE_936 is not set
> > # CONFIG_NLS_CODEPAGE_950 is not set
> > # CONFIG_NLS_CODEPAGE_932 is not set
> > # CONFIG_NLS_CODEPAGE_949 is not set
> > # CONFIG_NLS_CODEPAGE_874 is not set
> > # CONFIG_NLS_ISO8859_8 is not set
> > # CONFIG_NLS_CODEPAGE_1250 is not set
> > # CONFIG_NLS_CODEPAGE_1251 is not set
> > CONFIG_NLS_ASCII=y
> > CONFIG_NLS_ISO8859_1=y
> > # CONFIG_NLS_ISO8859_2 is not set
> > # CONFIG_NLS_ISO8859_3 is not set
> > # CONFIG_NLS_ISO8859_4 is not set
> > # CONFIG_NLS_ISO8859_5 is not set
> > # CONFIG_NLS_ISO8859_6 is not set
> > # CONFIG_NLS_ISO8859_7 is not set
> > # CONFIG_NLS_ISO8859_9 is not set
> > # CONFIG_NLS_ISO8859_13 is not set
> > # CONFIG_NLS_ISO8859_14 is not set
> > # CONFIG_NLS_ISO8859_15 is not set
> > # CONFIG_NLS_KOI8_R is not set
> > # CONFIG_NLS_KOI8_U is not set
> > CONFIG_NLS_UTF8=y
> > # CONFIG_DLM is not set
> > 
> > #
> > # Kernel hacking
> > #
> > CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> > CONFIG_PRINTK_TIME=y
> > CONFIG_ENABLE_WARN_DEPRECATED=y
> > CONFIG_ENABLE_MUST_CHECK=y
> > CONFIG_FRAME_WARN=2048
> > CONFIG_MAGIC_SYSRQ=y
> > # CONFIG_UNUSED_SYMBOLS is not set
> > CONFIG_DEBUG_FS=y
> > # CONFIG_HEADERS_CHECK is not set
> > CONFIG_DEBUG_KERNEL=y
> > # CONFIG_DEBUG_SHIRQ is not set
> > # CONFIG_DETECT_SOFTLOCKUP is not set
> > CONFIG_DETECT_HUNG_TASK=y
> > # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> > CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
> > # CONFIG_SCHED_DEBUG is not set
> > CONFIG_SCHEDSTATS=y
> > CONFIG_TIMER_STATS=y
> > # CONFIG_DEBUG_OBJECTS is not set
> > # CONFIG_SLUB_DEBUG_ON is not set
> > # CONFIG_SLUB_STATS is not set
> > # CONFIG_DEBUG_RT_MUTEXES is not set
> > # CONFIG_RT_MUTEX_TESTER is not set
> > CONFIG_DEBUG_SPINLOCK=y
> > CONFIG_DEBUG_MUTEXES=y
> > CONFIG_DEBUG_LOCK_ALLOC=y
> > CONFIG_PROVE_LOCKING=y
> > CONFIG_LOCKDEP=y
> > # CONFIG_LOCK_STAT is not set
> > CONFIG_DEBUG_LOCKDEP=y
> > CONFIG_TRACE_IRQFLAGS=y
> > CONFIG_DEBUG_SPINLOCK_SLEEP=y
> > # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> > CONFIG_STACKTRACE=y
> > # CONFIG_DEBUG_KOBJECT is not set
> > # CONFIG_DEBUG_HIGHMEM is not set
> > CONFIG_DEBUG_BUGVERBOSE=y
> > CONFIG_DEBUG_INFO=y
> > # CONFIG_DEBUG_VM is not set
> > # CONFIG_DEBUG_VIRTUAL is not set
> > # CONFIG_DEBUG_WRITECOUNT is not set
> > CONFIG_DEBUG_MEMORY_INIT=y
> > # CONFIG_DEBUG_LIST is not set
> > # CONFIG_DEBUG_SG is not set
> > # CONFIG_DEBUG_NOTIFIERS is not set
> > CONFIG_ARCH_WANT_FRAME_POINTERS=y
> > CONFIG_FRAME_POINTER=y
> > CONFIG_BOOT_PRINTK_DELAY=y
> > # CONFIG_RCU_TORTURE_TEST is not set
> > # CONFIG_RCU_CPU_STALL_DETECTOR is not set
> > # CONFIG_KPROBES_SANITY_TEST is not set
> > # CONFIG_BACKTRACE_SELF_TEST is not set
> > # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> > # CONFIG_LKDTM is not set
> > # CONFIG_FAULT_INJECTION is not set
> > # CONFIG_LATENCYTOP is not set
> > CONFIG_SYSCTL_SYSCALL_CHECK=y
> > # CONFIG_DEBUG_PAGEALLOC is not set
> > CONFIG_USER_STACKTRACE_SUPPORT=y
> > CONFIG_HAVE_FUNCTION_TRACER=y
> > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> > CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> > CONFIG_HAVE_DYNAMIC_FTRACE=y
> > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> > CONFIG_HAVE_FTRACE_SYSCALLS=y
> > CONFIG_TRACING_SUPPORT=y
> > 
> > #
> > # Tracers
> > #
> > # CONFIG_FUNCTION_TRACER is not set
> > # CONFIG_IRQSOFF_TRACER is not set
> > # CONFIG_SYSPROF_TRACER is not set
> > # CONFIG_SCHED_TRACER is not set
> > # CONFIG_CONTEXT_SWITCH_TRACER is not set
> > # CONFIG_EVENT_TRACER is not set
> > # CONFIG_FTRACE_SYSCALLS is not set
> > # CONFIG_BOOT_TRACER is not set
> > # CONFIG_TRACE_BRANCH_PROFILING is not set
> > # CONFIG_POWER_TRACER is not set
> > # CONFIG_STACK_TRACER is not set
> > # CONFIG_KMEMTRACE is not set
> > # CONFIG_WORKQUEUE_TRACER is not set
> > # CONFIG_BLK_DEV_IO_TRACE is not set
> > # CONFIG_MMIOTRACE is not set
> > CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
> > # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
> > # CONFIG_DYNAMIC_DEBUG is not set
> > # CONFIG_DMA_API_DEBUG is not set
> > # CONFIG_SAMPLES is not set
> > CONFIG_HAVE_ARCH_KGDB=y
> > # CONFIG_KGDB is not set
> > # CONFIG_STRICT_DEVMEM is not set
> > CONFIG_X86_VERBOSE_BOOTUP=y
> > CONFIG_EARLY_PRINTK=y
> > # CONFIG_EARLY_PRINTK_DBGP is not set
> > CONFIG_DEBUG_STACKOVERFLOW=y
> > CONFIG_DEBUG_STACK_USAGE=y
> > # CONFIG_DEBUG_PER_CPU_MAPS is not set
> > # CONFIG_X86_PTDUMP is not set
> > CONFIG_DEBUG_RODATA=y
> > # CONFIG_DEBUG_RODATA_TEST is not set
> > CONFIG_DEBUG_NX_TEST=m
> > # CONFIG_4KSTACKS is not set
> > CONFIG_DOUBLEFAULT=y
> > CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> > CONFIG_IO_DELAY_TYPE_0X80=0
> > CONFIG_IO_DELAY_TYPE_0XED=1
> > CONFIG_IO_DELAY_TYPE_UDELAY=2
> > CONFIG_IO_DELAY_TYPE_NONE=3
> > CONFIG_IO_DELAY_0X80=y
> > # CONFIG_IO_DELAY_0XED is not set
> > # CONFIG_IO_DELAY_UDELAY is not set
> > # CONFIG_IO_DELAY_NONE is not set
> > CONFIG_DEFAULT_IO_DELAY_TYPE=0
> > CONFIG_DEBUG_BOOT_PARAMS=y
> > # CONFIG_CPA_DEBUG is not set
> > CONFIG_OPTIMIZE_INLINING=y
> > 
> > #
> > # Security options
> > #
> > CONFIG_KEYS=y
> > CONFIG_KEYS_DEBUG_PROC_KEYS=y
> > CONFIG_SECURITY=y
> > # CONFIG_SECURITYFS is not set
> > CONFIG_SECURITY_NETWORK=y
> > # CONFIG_SECURITY_PATH is not set
> > CONFIG_SECURITY_FILE_CAPABILITIES=y
> > # CONFIG_SECURITY_ROOTPLUG is not set
> > CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
> > # CONFIG_SECURITY_SELINUX is not set
> > # CONFIG_SECURITY_TOMOYO is not set
> > # CONFIG_IMA is not set
> > CONFIG_CRYPTO=y
> > 
> > #
> > # Crypto core or helper
> > #
> > # CONFIG_CRYPTO_FIPS is not set
> > CONFIG_CRYPTO_ALGAPI=y
> > CONFIG_CRYPTO_ALGAPI2=y
> > CONFIG_CRYPTO_AEAD2=y
> > CONFIG_CRYPTO_BLKCIPHER=y
> > CONFIG_CRYPTO_BLKCIPHER2=y
> > CONFIG_CRYPTO_HASH=y
> > CONFIG_CRYPTO_HASH2=y
> > CONFIG_CRYPTO_RNG2=y
> > CONFIG_CRYPTO_PCOMP=y
> > CONFIG_CRYPTO_MANAGER=y
> > CONFIG_CRYPTO_MANAGER2=y
> > # CONFIG_CRYPTO_GF128MUL is not set
> > # CONFIG_CRYPTO_NULL is not set
> > CONFIG_CRYPTO_WORKQUEUE=y
> > # CONFIG_CRYPTO_CRYPTD is not set
> > # CONFIG_CRYPTO_AUTHENC is not set
> > # CONFIG_CRYPTO_TEST is not set
> > 
> > #
> > # Authenticated Encryption with Associated Data
> > #
> > # CONFIG_CRYPTO_CCM is not set
> > # CONFIG_CRYPTO_GCM is not set
> > # CONFIG_CRYPTO_SEQIV is not set
> > 
> > #
> > # Block modes
> > #
> > # CONFIG_CRYPTO_CBC is not set
> > # CONFIG_CRYPTO_CTR is not set
> > # CONFIG_CRYPTO_CTS is not set
> > CONFIG_CRYPTO_ECB=y
> > # CONFIG_CRYPTO_LRW is not set
> > # CONFIG_CRYPTO_PCBC is not set
> > # CONFIG_CRYPTO_XTS is not set
> > 
> > #
> > # Hash modes
> > #
> > # CONFIG_CRYPTO_HMAC is not set
> > # CONFIG_CRYPTO_XCBC is not set
> > 
> > #
> > # Digest
> > #
> > # CONFIG_CRYPTO_CRC32C is not set
> > # CONFIG_CRYPTO_CRC32C_INTEL is not set
> > # CONFIG_CRYPTO_MD4 is not set
> > CONFIG_CRYPTO_MD5=y
> > CONFIG_CRYPTO_MICHAEL_MIC=m
> > # CONFIG_CRYPTO_RMD128 is not set
> > # CONFIG_CRYPTO_RMD160 is not set
> > # CONFIG_CRYPTO_RMD256 is not set
> > # CONFIG_CRYPTO_RMD320 is not set
> > CONFIG_CRYPTO_SHA1=y
> > # CONFIG_CRYPTO_SHA256 is not set
> > # CONFIG_CRYPTO_SHA512 is not set
> > # CONFIG_CRYPTO_TGR192 is not set
> > # CONFIG_CRYPTO_WP512 is not set
> > 
> > #
> > # Ciphers
> > #
> > CONFIG_CRYPTO_AES=y
> > # CONFIG_CRYPTO_AES_586 is not set
> > # CONFIG_CRYPTO_ANUBIS is not set
> > CONFIG_CRYPTO_ARC4=y
> > # CONFIG_CRYPTO_BLOWFISH is not set
> > # CONFIG_CRYPTO_CAMELLIA is not set
> > # CONFIG_CRYPTO_CAST5 is not set
> > # CONFIG_CRYPTO_CAST6 is not set
> > # CONFIG_CRYPTO_DES is not set
> > # CONFIG_CRYPTO_FCRYPT is not set
> > # CONFIG_CRYPTO_KHAZAD is not set
> > # CONFIG_CRYPTO_SALSA20 is not set
> > # CONFIG_CRYPTO_SALSA20_586 is not set
> > # CONFIG_CRYPTO_SEED is not set
> > # CONFIG_CRYPTO_SERPENT is not set
> > # CONFIG_CRYPTO_TEA is not set
> > # CONFIG_CRYPTO_TWOFISH is not set
> > # CONFIG_CRYPTO_TWOFISH_586 is not set
> > 
> > #
> > # Compression
> > #
> > # CONFIG_CRYPTO_DEFLATE is not set
> > # CONFIG_CRYPTO_ZLIB is not set
> > # CONFIG_CRYPTO_LZO is not set
> > 
> > #
> > # Random Number Generation
> > #
> > # CONFIG_CRYPTO_ANSI_CPRNG is not set
> > # CONFIG_CRYPTO_HW is not set
> > CONFIG_HAVE_KVM=y
> > CONFIG_HAVE_KVM_IRQCHIP=y
> > CONFIG_VIRTUALIZATION=y
> > CONFIG_KVM=m
> > CONFIG_KVM_INTEL=m
> > # CONFIG_KVM_AMD is not set
> > # CONFIG_KVM_TRACE is not set
> > CONFIG_LGUEST=m
> > CONFIG_VIRTIO=y
> > CONFIG_VIRTIO_RING=y
> > # CONFIG_VIRTIO_PCI is not set
> > # CONFIG_VIRTIO_BALLOON is not set
> > # CONFIG_BINARY_PRINTF is not set
> > 
> > #
> > # Library routines
> > #
> > CONFIG_BITREVERSE=y
> > CONFIG_GENERIC_FIND_FIRST_BIT=y
> > CONFIG_GENERIC_FIND_NEXT_BIT=y
> > CONFIG_GENERIC_FIND_LAST_BIT=y
> > CONFIG_CRC_CCITT=y
> > # CONFIG_CRC16 is not set
> > CONFIG_CRC_T10DIF=y
> > CONFIG_CRC_ITU_T=m
> > CONFIG_CRC32=y
> > # CONFIG_CRC7 is not set
> > # CONFIG_LIBCRC32C is not set
> > CONFIG_AUDIT_GENERIC=y
> > CONFIG_ZLIB_INFLATE=y
> > CONFIG_ZLIB_DEFLATE=y
> > CONFIG_DECOMPRESS_GZIP=y
> > CONFIG_DECOMPRESS_BZIP2=y
> > CONFIG_DECOMPRESS_LZMA=y
> > CONFIG_HAS_IOMEM=y
> > CONFIG_HAS_IOPORT=y
> > CONFIG_HAS_DMA=y
> > CONFIG_CHECK_SIGNATURE=y
> > CONFIG_NLATTR=y
> 

-- 
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

Re: [Bug #13475] suspend/hibernate lockdep warning

[Dave Jones]

On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
 
 > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
 > > > >> Subject         : suspend/hibernate lockdep warning
 > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
 > > > 
 > > > I suspect the following commit, after revert this patch I test 5 times
 > > > without lockdep warnings.
 > > > 
 > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
 > > > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
 > > > Date:   Sun May 17 10:30:45 2009 -0400
 > > > 
 > > > 	[CPUFREQ] fix timer teardown in ondemand governor
 > > 
 > > The patch is probably not at fault here. I suspect it's some latent bug
 > > that simply got exposed by the change to cancel_delayed_work_sync(). In
 > > any case, Mathieu, can you take a look at this please?
 > 
 > Yes, it's been looked at and discussed on the cpufreq ML. The short
 > answer is that they plan to re-engineer cpufreq and remove the policy
 > rwlock taken around almost every operations at the cpufreq level.
 > 
 > The short-term solution, which is recognised as ugly, would be do to the
 > following before doing the cancel_delayed_work_sync() :
 > 
 > unlock policy rwlock write lock
 > 
 > lock policy rwlock write lock
 > 
 > It basically works because this rwlock is unneeded for teardown, hence
 > the future re-work planned.
 > 
 > I'm sorry I cannot prepare a patch current... I've got quite a few pages
 > of Ph.D. thesis due for the beginning of July.
 
I'm kinda scared to touch this code at all for .30 due to the number of
unexpected gotchas we seem to run into every time we touch something
locking related.  So I'm inclined to just live with the lockdep warning
for .30, and see how the real fixes look for .31, and push them back
as -stable updates if they work out.


Venki, what are your thoughts?

	Dave

[PATCH] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

[Mathieu Desnoyers]

* Dave Jones (davej-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org) wrote:
> On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
>  
>  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
>  > > > >> Subject         : suspend/hibernate lockdep warning
>  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
>  > > > 
>  > > > I suspect the following commit, after revert this patch I test 5 times
>  > > > without lockdep warnings.
>  > > > 
>  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
>  > > > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
>  > > > Date:   Sun May 17 10:30:45 2009 -0400
>  > > > 
>  > > > 	[CPUFREQ] fix timer teardown in ondemand governor
>  > > 
>  > > The patch is probably not at fault here. I suspect it's some latent bug
>  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
>  > > any case, Mathieu, can you take a look at this please?
>  > 
>  > Yes, it's been looked at and discussed on the cpufreq ML. The short
>  > answer is that they plan to re-engineer cpufreq and remove the policy
>  > rwlock taken around almost every operations at the cpufreq level.
>  > 
>  > The short-term solution, which is recognised as ugly, would be do to the
>  > following before doing the cancel_delayed_work_sync() :
>  > 
>  > unlock policy rwlock write lock
>  > 
>  > lock policy rwlock write lock
>  > 
>  > It basically works because this rwlock is unneeded for teardown, hence
>  > the future re-work planned.
>  > 
>  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
>  > of Ph.D. thesis due for the beginning of July.
>  
> I'm kinda scared to touch this code at all for .30 due to the number of
> unexpected gotchas we seem to run into every time we touch something
> locking related.  So I'm inclined to just live with the lockdep warning
> for .30, and see how the real fixes look for .31, and push them back
> as -stable updates if they work out.
> 
> 
> Venki, what are your thoughts?
> 

Hi Dave,

I've looked through the cpufreq code, and the following patch should
address the call site I've missed in commit 
42a06f2166f2f6f7bf04f32b4e823eacdceafdc9. I've followed all
__cpufreq_set_policy call sites within cpufreq.c to make sure they all
hold the rwsem write lock. An extra round of review would be good
though.

Can someone try the following patch and see if it fixes the regression ?
My test machine is currently busy running long formal verifications, and
therefore unavailable for kernel patch testing. It compiles fine on a
2.6.30-rc5 kernel with my (now mainlined) cpufreq patches applied.

Mathieu


remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

commit	42a06f2166f2f6f7bf04f32b4e823eacdceafdc9

Missed a call site for CPUFREQ_GOV_STOP to remove the rwlock taken around the
teardown. To make a long story short, the rwlock write-lock causes a circular
dependency with cancel_delayed_work_sync(), because the timer handler takes the
read lock.

Note that all callers to __cpufreq_set_policy are taking the rwsem. All sysfs
callers (writers) hold the write rwsem at the earliest sysfs calling stage.

However, the rwlock write-lock is not needed upon governor stop.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
CC: rjw-KKrjLPT3xs0@public.gmane.org
CC: mingo-X9Un+BFzKDI@public.gmane.org
CC: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
CC: Pekka Enberg <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org>
CC: Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
CC: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
CC: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>
CC: trenn-l3A5Bk7waGM@public.gmane.org
CC: sven.wegener-sQQoR7IzGU7R7s880joybQ@public.gmane.org
CC: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
CC: cpufreq-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 drivers/cpufreq/cpufreq.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

Index: linux-2.6-lttng/drivers/cpufreq/cpufreq.c
===================================================================
--- linux-2.6-lttng.orig/drivers/cpufreq/cpufreq.c	2009-06-08 10:20:48.000000000 -0400
+++ linux-2.6-lttng/drivers/cpufreq/cpufreq.c	2009-06-08 10:48:52.000000000 -0400
@@ -1697,8 +1697,17 @@ static int __cpufreq_set_policy(struct c
 			dprintk("governor switch\n");
 
 			/* end old governor */
-			if (data->governor)
+			if (data->governor) {
+				/*
+				 * Need to release the rwsem around governor
+				 * stop due to lock dependency between
+				 * cancel_delayed_work_sync and the read lock
+				 * taken in the delayed work handler.
+				 */
+				unlock_policy_rwsem_write(data->cpu);
 				__cpufreq_governor(data, CPUFREQ_GOV_STOP);
+				lock_policy_rwsem_write(data->cpu);
+			}
 
 			/* start new governor */
 			data->governor = policy->governor;


-- 
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

Re: [PATCH] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

[Pallipadi, Venkatesh]

On Mon, 2009-06-08 at 08:23 -0700, Mathieu Desnoyers wrote:
> * Dave Jones (davej-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org) wrote:
> > On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
> >  
> >  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> >  > > > >> Subject         : suspend/hibernate lockdep warning
> >  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> >  > > > 
> >  > > > I suspect the following commit, after revert this patch I test 5 times
> >  > > > without lockdep warnings.
> >  > > > 
> >  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
> >  > > > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> >  > > > Date:   Sun May 17 10:30:45 2009 -0400
> >  > > > 
> >  > > > 	[CPUFREQ] fix timer teardown in ondemand governor
> >  > > 
> >  > > The patch is probably not at fault here. I suspect it's some latent bug
> >  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
> >  > > any case, Mathieu, can you take a look at this please?
> >  > 
> >  > Yes, it's been looked at and discussed on the cpufreq ML. The short
> >  > answer is that they plan to re-engineer cpufreq and remove the policy
> >  > rwlock taken around almost every operations at the cpufreq level.
> >  > 
> >  > The short-term solution, which is recognised as ugly, would be do to the
> >  > following before doing the cancel_delayed_work_sync() :
> >  > 
> >  > unlock policy rwlock write lock
> >  > 
> >  > lock policy rwlock write lock
> >  > 
> >  > It basically works because this rwlock is unneeded for teardown, hence
> >  > the future re-work planned.
> >  > 
> >  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
> >  > of Ph.D. thesis due for the beginning of July.
> >  
> > I'm kinda scared to touch this code at all for .30 due to the number of
> > unexpected gotchas we seem to run into every time we touch something
> > locking related.  So I'm inclined to just live with the lockdep warning
> > for .30, and see how the real fixes look for .31, and push them back
> > as -stable updates if they work out.
> > 
> > 
> > Venki, what are your thoughts?
> > 
> 
> Hi Dave,
> 
> I've looked through the cpufreq code, and the following patch should
> address the call site I've missed in commit 
> 42a06f2166f2f6f7bf04f32b4e823eacdceafdc9. I've followed all
> __cpufreq_set_policy call sites within cpufreq.c to make sure they all
> hold the rwsem write lock. An extra round of review would be good
> though.
> 
> Can someone try the following patch and see if it fixes the regression ?
> My test machine is currently busy running long formal verifications, and
> therefore unavailable for kernel patch testing. It compiles fine on a
> 2.6.30-rc5 kernel with my (now mainlined) cpufreq patches applied.
> 
> Mathieu
> 
> 
> remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)
> 
> commit	42a06f2166f2f6f7bf04f32b4e823eacdceafdc9
> 
> Missed a call site for CPUFREQ_GOV_STOP to remove the rwlock taken around the
> teardown. To make a long story short, the rwlock write-lock causes a circular
> dependency with cancel_delayed_work_sync(), because the timer handler takes the
> read lock.
> 
> Note that all callers to __cpufreq_set_policy are taking the rwsem. All sysfs
> callers (writers) hold the write rwsem at the earliest sysfs calling stage.
> 
> However, the rwlock write-lock is not needed upon governor stop.
> 
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>

Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

This change is same as the patch that I was testing right now.
Only additional change I had was a comment for cpu_policy_rwsem

  *   are concerned with are online after they get the lock.
  * - Governor routines that can be called in cpufreq hotplug path
should not
  *   take this sem as top level hotplug notifier handler takes this.
+ * - Lock should not be held across
+ *     __cpufreq_governor(data, CPUFREQ_GOV_STOP);
  */


Thanks,
Venki


> CC: rjw-KKrjLPT3xs0@public.gmane.org
> CC: mingo-X9Un+BFzKDI@public.gmane.org
> CC: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> CC: Pekka Enberg <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org>
> CC: Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> CC: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
> CC: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>
> CC: trenn-l3A5Bk7waGM@public.gmane.org
> CC: sven.wegener-sQQoR7IzGU7R7s880joybQ@public.gmane.org
> CC: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> CC: cpufreq-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> ---
>  drivers/cpufreq/cpufreq.c |   11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> Index: linux-2.6-lttng/drivers/cpufreq/cpufreq.c
> ===================================================================
> --- linux-2.6-lttng.orig/drivers/cpufreq/cpufreq.c	2009-06-08 10:20:48.000000000 -0400
> +++ linux-2.6-lttng/drivers/cpufreq/cpufreq.c	2009-06-08 10:48:52.000000000 -0400
> @@ -1697,8 +1697,17 @@ static int __cpufreq_set_policy(struct c
>  			dprintk("governor switch\n");
>  
>  			/* end old governor */
> -			if (data->governor)
> +			if (data->governor) {
> +				/*
> +				 * Need to release the rwsem around governor
> +				 * stop due to lock dependency between
> +				 * cancel_delayed_work_sync and the read lock
> +				 * taken in the delayed work handler.
> +				 */
> +				unlock_policy_rwsem_write(data->cpu);
>  				__cpufreq_governor(data, CPUFREQ_GOV_STOP);
> +				lock_policy_rwsem_write(data->cpu);
> +			}
>  
>  			/* start new governor */
>  			data->governor = policy->governor;
> 
> 

Re: [PATCH] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

[Mathieu Desnoyers]

OK, here is the re-run, with comment and acked-by added.

Thanks,

Mathieu


remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

commit	42a06f2166f2f6f7bf04f32b4e823eacdceafdc9

Missed a call site for CPUFREQ_GOV_STOP to remove the rwlock taken around the
teardown. To make a long story short, the rwlock write-lock causes a circular
dependency with cancel_delayed_work_sync(), because the timer handler takes the
read lock.

Note that all callers to __cpufreq_set_policy are taking the rwsem. All sysfs
callers (writers) hold the write rwsem at the earliest sysfs calling stage.

However, the rwlock write-lock is not needed upon governor stop.

Change :
- Added comment from Venkyi at lock definition site.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
CC: rjw@sisk.pl
CC: mingo@elte.hu
CC: Shaohua Li <shaohua.li@intel.com>
CC: Pekka Enberg <penberg@cs.helsinki.fi>
CC: Dave Young <hidave.darkstar@gmail.com>
CC: "Rafael J. Wysocki" <rjw@sisk.pl>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: trenn@suse.de
CC: sven.wegener@stealer.net
CC: cpufreq@vger.kernel.org
---
 drivers/cpufreq/cpufreq.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

Index: linux-2.6-lttng/drivers/cpufreq/cpufreq.c
===================================================================
--- linux-2.6-lttng.orig/drivers/cpufreq/cpufreq.c	2009-06-08 12:47:22.000000000 -0400
+++ linux-2.6-lttng/drivers/cpufreq/cpufreq.c	2009-06-08 12:48:38.000000000 -0400
@@ -61,6 +61,8 @@ static DEFINE_SPINLOCK(cpufreq_driver_lo
  *   are concerned with are online after they get the lock.
  * - Governor routines that can be called in cpufreq hotplug path should not
  *   take this sem as top level hotplug notifier handler takes this.
+ * - Lock should not be held across
+ *     __cpufreq_governor(data, CPUFREQ_GOV_STOP);
  */
 static DEFINE_PER_CPU(int, policy_cpu);
 static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem);
@@ -1697,8 +1699,17 @@ static int __cpufreq_set_policy(struct c
 			dprintk("governor switch\n");
 
 			/* end old governor */
-			if (data->governor)
+			if (data->governor) {
+				/*
+				 * Need to release the rwsem around governor
+				 * stop due to lock dependency between
+				 * cancel_delayed_work_sync and the read lock
+				 * taken in the delayed work handler.
+				 */
+				unlock_policy_rwsem_write(data->cpu);
 				__cpufreq_governor(data, CPUFREQ_GOV_STOP);
+				lock_policy_rwsem_write(data->cpu);
+			}
 
 			/* start new governor */
 			data->governor = policy->governor;

-- 
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

Re: [PATCH] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

[Dave Young]

On Mon, Jun 8, 2009 at 11:23 PM, Mathieu
Desnoyers<mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org> wrote:
> * Dave Jones (davej-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org) wrote:
>> On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
>>
>>  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
>>  > > > >> Subject         : suspend/hibernate lockdep warning
>>  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
>>  > > >
>>  > > > I suspect the following commit, after revert this patch I test 5 times
>>  > > > without lockdep warnings.
>>  > > >
>>  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
>>  > > > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
>>  > > > Date:   Sun May 17 10:30:45 2009 -0400
>>  > > >
>>  > > >        [CPUFREQ] fix timer teardown in ondemand governor
>>  > >
>>  > > The patch is probably not at fault here. I suspect it's some latent bug
>>  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
>>  > > any case, Mathieu, can you take a look at this please?
>>  >
>>  > Yes, it's been looked at and discussed on the cpufreq ML. The short
>>  > answer is that they plan to re-engineer cpufreq and remove the policy
>>  > rwlock taken around almost every operations at the cpufreq level.
>>  >
>>  > The short-term solution, which is recognised as ugly, would be do to the
>>  > following before doing the cancel_delayed_work_sync() :
>>  >
>>  > unlock policy rwlock write lock
>>  >
>>  > lock policy rwlock write lock
>>  >
>>  > It basically works because this rwlock is unneeded for teardown, hence
>>  > the future re-work planned.
>>  >
>>  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
>>  > of Ph.D. thesis due for the beginning of July.
>>
>> I'm kinda scared to touch this code at all for .30 due to the number of
>> unexpected gotchas we seem to run into every time we touch something
>> locking related.  So I'm inclined to just live with the lockdep warning
>> for .30, and see how the real fixes look for .31, and push them back
>> as -stable updates if they work out.
>>
>>
>> Venki, what are your thoughts?
>>
>
> Hi Dave,
>
> I've looked through the cpufreq code, and the following patch should
> address the call site I've missed in commit
> 42a06f2166f2f6f7bf04f32b4e823eacdceafdc9. I've followed all
> __cpufreq_set_policy call sites within cpufreq.c to make sure they all
> hold the rwsem write lock. An extra round of review would be good
> though.
>
> Can someone try the following patch and see if it fixes the regression ?

Bad news, I have tried the patch and It does not fix the regression.

> My test machine is currently busy running long formal verifications, and
> therefore unavailable for kernel patch testing. It compiles fine on a
> 2.6.30-rc5 kernel with my (now mainlined) cpufreq patches applied.
>
> Mathieu
>
>
> remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)
>
> commit  42a06f2166f2f6f7bf04f32b4e823eacdceafdc9
>
> Missed a call site for CPUFREQ_GOV_STOP to remove the rwlock taken around the
> teardown. To make a long story short, the rwlock write-lock causes a circular
> dependency with cancel_delayed_work_sync(), because the timer handler takes the
> read lock.
>
> Note that all callers to __cpufreq_set_policy are taking the rwsem. All sysfs
> callers (writers) hold the write rwsem at the earliest sysfs calling stage.
>
> However, the rwlock write-lock is not needed upon governor stop.
>
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> CC: rjw-KKrjLPT3xs0@public.gmane.org
> CC: mingo-X9Un+BFzKDI@public.gmane.org
> CC: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> CC: Pekka Enberg <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org>
> CC: Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> CC: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
> CC: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>
> CC: trenn-l3A5Bk7waGM@public.gmane.org
> CC: sven.wegener-sQQoR7IzGU7R7s880joybQ@public.gmane.org
> CC: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> CC: cpufreq-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> ---
>  drivers/cpufreq/cpufreq.c |   11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
>
> Index: linux-2.6-lttng/drivers/cpufreq/cpufreq.c
> ===================================================================
> --- linux-2.6-lttng.orig/drivers/cpufreq/cpufreq.c      2009-06-08 10:20:48.000000000 -0400
> +++ linux-2.6-lttng/drivers/cpufreq/cpufreq.c   2009-06-08 10:48:52.000000000 -0400
> @@ -1697,8 +1697,17 @@ static int __cpufreq_set_policy(struct c
>                        dprintk("governor switch\n");
>
>                        /* end old governor */
> -                       if (data->governor)
> +                       if (data->governor) {
> +                               /*
> +                                * Need to release the rwsem around governor
> +                                * stop due to lock dependency between
> +                                * cancel_delayed_work_sync and the read lock
> +                                * taken in the delayed work handler.
> +                                */
> +                               unlock_policy_rwsem_write(data->cpu);
>                                __cpufreq_governor(data, CPUFREQ_GOV_STOP);
> +                               lock_policy_rwsem_write(data->cpu);
> +                       }
>
>                        /* start new governor */
>                        data->governor = policy->governor;
>
>
> --
> Mathieu Desnoyers
> OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>



-- 
Regards
dave

Re: [PATCH] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

[Mathieu Desnoyers]

* Dave Young (hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org) wrote:
> On Mon, Jun 8, 2009 at 11:23 PM, Mathieu
> Desnoyers<mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org> wrote:
> > * Dave Jones (davej-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org) wrote:
> >> On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
> >>
> >>  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> >>  > > > >> Subject         : suspend/hibernate lockdep warning
> >>  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> >>  > > >
> >>  > > > I suspect the following commit, after revert this patch I test 5 times
> >>  > > > without lockdep warnings.
> >>  > > >
> >>  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
> >>  > > > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> >>  > > > Date:   Sun May 17 10:30:45 2009 -0400
> >>  > > >
> >>  > > >        [CPUFREQ] fix timer teardown in ondemand governor
> >>  > >
> >>  > > The patch is probably not at fault here. I suspect it's some latent bug
> >>  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
> >>  > > any case, Mathieu, can you take a look at this please?
> >>  >
> >>  > Yes, it's been looked at and discussed on the cpufreq ML. The short
> >>  > answer is that they plan to re-engineer cpufreq and remove the policy
> >>  > rwlock taken around almost every operations at the cpufreq level.
> >>  >
> >>  > The short-term solution, which is recognised as ugly, would be do to the
> >>  > following before doing the cancel_delayed_work_sync() :
> >>  >
> >>  > unlock policy rwlock write lock
> >>  >
> >>  > lock policy rwlock write lock
> >>  >
> >>  > It basically works because this rwlock is unneeded for teardown, hence
> >>  > the future re-work planned.
> >>  >
> >>  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
> >>  > of Ph.D. thesis due for the beginning of July.
> >>
> >> I'm kinda scared to touch this code at all for .30 due to the number of
> >> unexpected gotchas we seem to run into every time we touch something
> >> locking related.  So I'm inclined to just live with the lockdep warning
> >> for .30, and see how the real fixes look for .31, and push them back
> >> as -stable updates if they work out.
> >>
> >>
> >> Venki, what are your thoughts?
> >>
> >
> > Hi Dave,
> >
> > I've looked through the cpufreq code, and the following patch should
> > address the call site I've missed in commit
> > 42a06f2166f2f6f7bf04f32b4e823eacdceafdc9. I've followed all
> > __cpufreq_set_policy call sites within cpufreq.c to make sure they all
> > hold the rwsem write lock. An extra round of review would be good
> > though.
> >
> > Can someone try the following patch and see if it fixes the regression ?
> 
> Bad news, I have tried the patch and It does not fix the regression.
> 

Can you provide the lockdep error message you get with the patch
applied?

Thanks,

Mathieu


> > My test machine is currently busy running long formal verifications, and
> > therefore unavailable for kernel patch testing. It compiles fine on a
> > 2.6.30-rc5 kernel with my (now mainlined) cpufreq patches applied.
> >
> > Mathieu
> >
> >
> > remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)
> >
> > commit  42a06f2166f2f6f7bf04f32b4e823eacdceafdc9
> >
> > Missed a call site for CPUFREQ_GOV_STOP to remove the rwlock taken around the
> > teardown. To make a long story short, the rwlock write-lock causes a circular
> > dependency with cancel_delayed_work_sync(), because the timer handler takes the
> > read lock.
> >
> > Note that all callers to __cpufreq_set_policy are taking the rwsem. All sysfs
> > callers (writers) hold the write rwsem at the earliest sysfs calling stage.
> >
> > However, the rwlock write-lock is not needed upon governor stop.
> >
> > Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> > CC: rjw-KKrjLPT3xs0@public.gmane.org
> > CC: mingo-X9Un+BFzKDI@public.gmane.org
> > CC: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> > CC: Pekka Enberg <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org>
> > CC: Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > CC: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
> > CC: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>
> > CC: trenn-l3A5Bk7waGM@public.gmane.org
> > CC: sven.wegener-sQQoR7IzGU7R7s880joybQ@public.gmane.org
> > CC: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> > CC: cpufreq-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > ---
> >  drivers/cpufreq/cpufreq.c |   11 ++++++++++-
> >  1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > Index: linux-2.6-lttng/drivers/cpufreq/cpufreq.c
> > ===================================================================
> > --- linux-2.6-lttng.orig/drivers/cpufreq/cpufreq.c      2009-06-08 10:20:48.000000000 -0400
> > +++ linux-2.6-lttng/drivers/cpufreq/cpufreq.c   2009-06-08 10:48:52.000000000 -0400
> > @@ -1697,8 +1697,17 @@ static int __cpufreq_set_policy(struct c
> >                        dprintk("governor switch\n");
> >
> >                        /* end old governor */
> > -                       if (data->governor)
> > +                       if (data->governor) {
> > +                               /*
> > +                                * Need to release the rwsem around governor
> > +                                * stop due to lock dependency between
> > +                                * cancel_delayed_work_sync and the read lock
> > +                                * taken in the delayed work handler.
> > +                                */
> > +                               unlock_policy_rwsem_write(data->cpu);
> >                                __cpufreq_governor(data, CPUFREQ_GOV_STOP);
> > +                               lock_policy_rwsem_write(data->cpu);
> > +                       }
> >
> >                        /* start new governor */
> >                        data->governor = policy->governor;
> >
> >
> > --
> > Mathieu Desnoyers
> > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >
> 
> 
> 
> -- 
> Regards
> dave
> 

-- 
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

Re: [PATCH] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)

[Dave Young]

On Tue, Jun 9, 2009 at 11:23 PM, Mathieu
Desnoyers<mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org> wrote:
> * Dave Young (hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org) wrote:
>> On Mon, Jun 8, 2009 at 11:23 PM, Mathieu
>> Desnoyers<mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org> wrote:
>> > * Dave Jones (davej-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org) wrote:
>> >> On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
>> >>
>> >>  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
>> >>  > > > >> Subject         : suspend/hibernate lockdep warning
>> >>  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
>> >>  > > >
>> >>  > > > I suspect the following commit, after revert this patch I test 5 times
>> >>  > > > without lockdep warnings.
>> >>  > > >
>> >>  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
>> >>  > > > Author: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
>> >>  > > > Date:   Sun May 17 10:30:45 2009 -0400
>> >>  > > >
>> >>  > > >        [CPUFREQ] fix timer teardown in ondemand governor
>> >>  > >
>> >>  > > The patch is probably not at fault here. I suspect it's some latent bug
>> >>  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
>> >>  > > any case, Mathieu, can you take a look at this please?
>> >>  >
>> >>  > Yes, it's been looked at and discussed on the cpufreq ML. The short
>> >>  > answer is that they plan to re-engineer cpufreq and remove the policy
>> >>  > rwlock taken around almost every operations at the cpufreq level.
>> >>  >
>> >>  > The short-term solution, which is recognised as ugly, would be do to the
>> >>  > following before doing the cancel_delayed_work_sync() :
>> >>  >
>> >>  > unlock policy rwlock write lock
>> >>  >
>> >>  > lock policy rwlock write lock
>> >>  >
>> >>  > It basically works because this rwlock is unneeded for teardown, hence
>> >>  > the future re-work planned.
>> >>  >
>> >>  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
>> >>  > of Ph.D. thesis due for the beginning of July.
>> >>
>> >> I'm kinda scared to touch this code at all for .30 due to the number of
>> >> unexpected gotchas we seem to run into every time we touch something
>> >> locking related.  So I'm inclined to just live with the lockdep warning
>> >> for .30, and see how the real fixes look for .31, and push them back
>> >> as -stable updates if they work out.
>> >>
>> >>
>> >> Venki, what are your thoughts?
>> >>
>> >
>> > Hi Dave,
>> >
>> > I've looked through the cpufreq code, and the following patch should
>> > address the call site I've missed in commit
>> > 42a06f2166f2f6f7bf04f32b4e823eacdceafdc9. I've followed all
>> > __cpufreq_set_policy call sites within cpufreq.c to make sure they all
>> > hold the rwsem write lock. An extra round of review would be good
>> > though.
>> >
>> > Can someone try the following patch and see if it fixes the regression ?
>>
>> Bad news, I have tried the patch and It does not fix the regression.
>>
>
> Can you provide the lockdep error message you get with the patch
> applied?

Please see the dmesg dump:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30-rc8-00073-g3af968e-dirty
(dave@darkstar) (gcc version 4.2.4) #61 SMP Wed Jun 10 10:23:04 CST
2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003d38d400 (usable)
[    0.000000]  BIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003d38f400 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x3d38d max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 03DC00000 mask FFFC00000 uncachable
[    0.000000]   3 base 03E000000 mask FFE000000 uncachable
[    0.000000]   4 base 03DB00000 mask FFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 000000003db00000 - 0000000040000000
(usable) ==> (reserved)
[    0.000000] e820 update range: 00000000e0000000 - 0000000100000000
(usable) ==> (reserved)
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] ACPI: RSDP 000fbd10 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 3d391e00 0006C (v01 DELL    M09     27D90219
ASL  00000061)
[    0.000000] ACPI: FACP 3d391c9c 000F4 (v04 DELL    M09     27D90219
ASL  00000061)
[    0.000000] ACPI: DSDT 3d392400 06357 (v02 INT430 SYSFexxx 00001001
INTL 20050624)
[    0.000000] ACPI: FACS 3d3a0c00 00040
[    0.000000] ACPI: HPET 3d391f00 00038 (v01 DELL    M09     00000001
ASL  00000061)
[    0.000000] ACPI: DMAR 3d3a0400 000F8 (v01 DELL    M09     27D90219
ASL  00000061)
[    0.000000] ACPI: APIC 3d392000 00068 (v01 DELL    M09     27D90219
ASL  00000047)
[    0.000000] ACPI: ASF! 3d391c00 00076 (v32 DELL    M09     27D90219
ASL  00000061)
[    0.000000] ACPI: MCFG 3d391fc0 0003E (v16 DELL    M09     27D90219
ASL  00000061)
[    0.000000] ACPI: TCPA 3d392300 00032 (v01                 00000000
ASL  00000000)
[    0.000000] ACPI: BOOT 3d391bc0 00028 (v01 DELL    M09     27D90219
ASL  00000061)
[    0.000000] ACPI: SSDT 3d3902eb 0066C (v01  PmRef    CpuPm 00003000
INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 91MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==>
[0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==>
[0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 0001b09e54]    TEXT DATA BSS ==>
[0001000000 - 0001b09e54]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==>
[000009f000 - 0000100000]
[    0.000000]   #5 [0001b0a000 - 0001b1217c]              BRK ==>
[0001b0a000 - 0001b1217c]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==>
[0000007000 - 0000008000]
[    0.000000]   #7 [0000008000 - 000000f000]          BOOTMAP ==>
[0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003d38d
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003d38d
[    0.000000] On node 0 totalpages: 250668
[    0.000000] free_area_init_node: node 0, pgdat c154ac80,
node_mem_map c1b13000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 184 pages used for memmap
[    0.000000]   HighMem zone: 23255 pages, LIFO batch:3
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:b8000000)
[    0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages at c22c6000, static data 25052 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 248708
[    0.000000] Kernel command line: BOOT_IMAGE=dirty ro root=802
vt.default_utf8=0 resume=/dev/sda1
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:320
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1995.186 MHz processor.
[    0.003333] Console: colour dummy device 80x25
[    0.003333] console [tty0] enabled
[    0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[    0.003333] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.003333] ... MAX_LOCK_DEPTH:          48
[    0.003333] ... MAX_LOCKDEP_KEYS:        8191
[    0.003333] ... CLASSHASH_SIZE:          4096
[    0.003333] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.003333] ... MAX_LOCKDEP_CHAINS:      32768
[    0.003333] ... CHAINHASH_SIZE:          16384
[    0.003333]  memory used by lock dependency info: 3487 kB
[    0.003333]  per task-struct memory footprint: 1152 bytes
[    0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.003333] Initializing HighMem for node 0 (000377fe:0003d38d)
[    0.003333] Memory: 982232k/1003060k available (3378k kernel code,
20148k reserved, 2152k data, 352k init, 93756k highmem)
[    0.003333] virtual kernel memory layout:
[    0.003333]     fixmap  : 0xfff9c000 - 0xfffff000   ( 396 kB)
[    0.003333]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.003333]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.003333]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.003333]       .init : 0xc156d000 - 0xc15c5000   ( 352 kB)
[    0.003333]       .data : 0xc134c8a5 - 0xc1566974   (2152 kB)
[    0.003333]       .text : 0xc1000000 - 0xc134c8a5   (3378 kB)
[    0.003333] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[    0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[    0.003333] hpet clockevent registered
[    0.003333] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.003333] Calibrating delay loop (skipped), value calculated
using timer frequency.. 3991.63 BogoMIPS (lpj=6650620)
[    0.003333] Security Framework initialized
[    0.003333] Mount-cache hash table entries: 512
[    0.003333] Initializing cgroup subsys ns
[    0.003333] Initializing cgroup subsys cpuacct
[    0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.003333] CPU: L2 cache: 2048K
[    0.003333] CPU: Physical Processor ID: 0
[    0.003333] CPU: Processor Core ID: 0
[    0.003333] using mwait in idle threads.
[    0.003333] Checking 'hlt' instruction... OK.
[    0.014575] ACPI: Core revision 20090320
[    0.030585] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064121] CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
[    0.066666] lockdep: fixing up alternatives.
[    0.066666] Booting processor 1 APIC 0x1 ip 0x6000
[    0.003333] Initializing CPU#1
[    0.003333] Calibrating delay using timer specific routine..
3991.23 BogoMIPS (lpj=6649981)
[    0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.003333] CPU: L2 cache: 2048K
[    0.003333] CPU: Physical Processor ID: 0
[    0.003333] CPU: Processor Core ID: 1
[    0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.158284] CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
[    0.158328] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.160064] Brought up 2 CPUs
[    0.160070] Total of 2 processors activated (7983.87 BogoMIPS).
[    0.160416] khelper used greatest stack depth: 6832 bytes left
[    0.160487] net_namespace: 636 bytes
[    0.160487] Booting paravirtualized kernel on bare hardware
[    0.163499] regulator: core version 0.5
[    0.163499] Time: 13:52:52  Date: 06/10/09
[    0.163546] NET: Registered protocol family 16
[    0.163628] ACPI: bus type pci registered
[    0.163628] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.163628] PCI: MCFG area at f8000000 reserved in E820
[    0.163628] PCI: Using MMCONFIG for extended config space
[    0.163628] PCI: Using configuration type 1 for base access
[    0.176761] bio: create slab <bio-0> at 0
[    0.184114] ACPI: EC: Look up EC in DSDT
[    0.184462] ACPI: BIOS _OSI(Linux) query ignored
[    0.224002] ACPI: SSDT 3d3a0c80 00043 (v01  LMPWR  DELLLOM 00001001
INTL 20050624)
[    0.253401] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[    0.270327] ACPI: Interpreter enabled
[    0.270336] ACPI: (supports S0 S3 S4 S5)
[    0.270399] ACPI: Using IOAPIC for interrupt routing
[    0.380756] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[    0.380756] ACPI: EC: driver started in interrupt mode
[    0.385239] ACPI: No dock devices found.
[    0.385270] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.385374] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
[    0.385374] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[    0.385374] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
[    0.385374] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
[    0.385374] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[    0.385374] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[    0.385374] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[    0.386670] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[    0.386778] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.386790] pci 0000:00:1a.7: PME# disabled
[    0.386883] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-0xf6afffff]
[    0.386976] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.386987] pci 0000:00:1b.0: PME# disabled
[    0.387119] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.387130] pci 0000:00:1c.0: PME# disabled
[    0.387266] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.387277] pci 0000:00:1c.1: PME# disabled
[    0.387417] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.387428] pci 0000:00:1c.4: PME# disabled
[    0.387547] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[    0.387692] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[    0.387836] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[    0.387983] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[    0.388089] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.388100] pci 0000:00:1d.7: PME# disabled
[    0.388481] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[    0.388493] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[    0.388504] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[    0.388516] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[    0.388528] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[    0.388540] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[    0.388613] pci 0000:00:1f.2: PME# supported from D3hot
[    0.388623] pci 0000:00:1f.2: PME# disabled
[    0.388688] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-0xf6afbfff]
[    0.388718] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[    0.389260] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-0xf69fffff]
[    0.389514] pci 0000:0c:00.0: supports D1 D2
[    0.389517] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[    0.389535] pci 0000:0c:00.0: PME# disabled
[    0.389706] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
[    0.389875] pci 0000:09:00.0: reg 10 64bit mmio: [0xf68f0000-0xf68fffff]
[    0.390026] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.390038] pci 0000:09:00.0: PME# disabled
[    0.390158] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6800000-0xf68fffff]
[    0.390235] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.390272] pci 0000:02:01.0: supports D1 D2
[    0.390274] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.390285] pci 0000:02:01.0: PME# disabled
[    0.390351] pci 0000:02:01.1: reg 10 32bit mmio: [0xf67ff800-0xf67fffff]
[    0.390440] pci 0000:02:01.1: supports D1 D2
[    0.390443] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.390454] pci 0000:02:01.1: PME# disabled
[    0.390522] pci 0000:02:01.2: reg 10 32bit mmio: [0xf67ff600-0xf67ff6ff]
[    0.390613] pci 0000:02:01.2: supports D1 D2
[    0.390616] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.390627] pci 0000:02:01.2: PME# disabled
[    0.390693] pci 0000:02:01.3: reg 10 32bit mmio: [0xf67ff700-0xf67ff7ff]
[    0.390783] pci 0000:02:01.3: supports D1 D2
[    0.390785] pci 0000:02:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.390796] pci 0000:02:01.3: PME# disabled
[    0.390906] pci 0000:00:1e.0: transparent bridge
[    0.390921] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6700000-0xf67fffff]
[    0.391000] pci_bus 0000:00: on NUMA node 0
[    0.391010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.391715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.391969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.392106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.392250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.420761] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[    0.420761] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[    0.420761] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3
[    0.423493] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[    0.423722] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.423957] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.424192] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.424398] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[    0.424519] SCSI subsystem initialized
[    0.424519] libata version 3.00 loaded.
[    0.424519] usbcore: registered new interface driver usbfs
[    0.424519] usbcore: registered new interface driver hub
[    0.424519] usbcore: registered new device driver usb
[    0.426752] PCI: Using ACPI for IRQ routing
[    0.486723] cfg80211: Using static regulatory domain info
[    0.486723] cfg80211: Regulatory domain: US
[    0.486723] 	(start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[    0.486730] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    0.486737] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.486744] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.486751] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.486758] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    0.486766] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    0.486865] cfg80211: Calling CRDA for country: US
[    0.486975] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.486975] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.501757] Switched to high resolution mode on CPU 1
[    0.503336] Switched to high resolution mode on CPU 0
[    0.503359] pnp: PnP ACPI init
[    0.503393] ACPI: bus type pnp registered
[    0.583232] pnp: PnP ACPI: found 13 devices
[    0.583239] ACPI: ACPI bus type pnp unregistered
[    0.583264] system 00:05: ioport range 0xc80-0xcaf has been reserved
[    0.583273] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[    0.583294] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.583312] system 00:09: ioport range 0xcb0-0xcbb has been reserved
[    0.583320] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.583346] system 00:0a: ioport range 0x900-0x92f has been reserved
[    0.583354] system 00:0a: ioport range 0x931-0x933 has been reserved
[    0.583362] system 00:0a: ioport range 0x935-0x97f has been reserved
[    0.583371] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.583379] system 00:0a: ioport range 0x1000-0x1005 has been reserved
[    0.583387] system 00:0a: ioport range 0x1008-0x100f has been reserved
[    0.583405] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[    0.583414] system 00:0b: ioport range 0x1006-0x1007 has been reserved
[    0.583423] system 00:0b: ioport range 0x100a-0x1059 could not be reserved
[    0.583431] system 00:0b: ioport range 0x1060-0x107f has been reserved
[    0.583439] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[    0.583447] system 00:0b: ioport range 0x1100-0x111f has been reserved
[    0.583455] system 00:0b: ioport range 0x1010-0x102f has been reserved
[    0.583463] system 00:0b: ioport range 0x809-0x809 has been reserved
[    0.583482] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[    0.583490] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[    0.583499] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[    0.583508] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.583516] system 00:0c: iomem range 0x100000-0x3d38d3ff could not
be reserved
[    0.583526] system 00:0c: iomem range 0x3d38d400-0x3dafffff could
not be reserved
[    0.583535] system 00:0c: iomem range 0x3db00000-0x3dbfffff has been reserved
[    0.583544] system 00:0c: iomem range 0xffe80000-0xffffffff has been reserved
[    0.583553] system 00:0c: iomem range 0xffa00000-0xffb7ffff has been reserved
[    0.583561] system 00:0c: iomem range 0xfec00000-0xfec0ffff has been reserved
[    0.583569] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.583578] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.583586] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.583595] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
[    0.583604] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
[    0.583612] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
[    0.583621] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[    0.583630] system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
[    0.583638] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
[    0.583647] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.619907] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[    0.619914] pci 0000:00:1c.0:   IO window: disabled
[    0.619927] pci 0000:00:1c.0:   MEM window: disabled
[    0.619937] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.619952] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[    0.619958] pci 0000:00:1c.1:   IO window: disabled
[    0.619970] pci 0000:00:1c.1:   MEM window: 0xf6900000-0xf69fffff
[    0.619981] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.619995] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[    0.620009] pci 0000:00:1c.4:   IO window: disabled
[    0.620021] pci 0000:00:1c.4:   MEM window: 0xf6800000-0xf68fffff
[    0.620032] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.620058] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[    0.620065] pci 0000:02:01.0:   IO window: 0x002000-0x0020ff
[    0.620075] pci 0000:02:01.0:   IO window: 0x002400-0x0024ff
[    0.620086] pci 0000:02:01.0:   PREFETCH window: 0x50000000-0x53ffffff
[    0.620098] pci 0000:02:01.0:   MEM window: 0x54000000-0x57ffffff
[    0.620109] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.620118] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    0.620130] pci 0000:00:1e.0:   MEM window: 0xf6700000-0xf67fffff
[    0.620142] pci 0000:00:1e.0:   PREFETCH window:
0x00000050000000-0x00000053ffffff
[    0.620174] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.620187] pci 0000:00:1c.0: setting latency timer to 64
[    0.620203] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.620215] pci 0000:00:1c.1: setting latency timer to 64
[    0.620228] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.620240] pci 0000:00:1c.4: setting latency timer to 64
[    0.620252] pci 0000:00:1e.0: setting latency timer to 64
[    0.620270] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.620283] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.620286] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.620289] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
[    0.620293] pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff]
[    0.620296] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.620299] pci_bus 0000:02: resource 1 mem: [0xf6700000-0xf67fffff]
[    0.620302] pci_bus 0000:02: resource 2 pref mem [0x50000000-0x53ffffff]
[    0.620305] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.620308] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.620311] pci_bus 0000:03: resource 0 io:  [0x2000-0x20ff]
[    0.620314] pci_bus 0000:03: resource 1 io:  [0x2400-0x24ff]
[    0.620317] pci_bus 0000:03: resource 2 pref mem [0x50000000-0x53ffffff]
[    0.620321] pci_bus 0000:03: resource 3 mem: [0x54000000-0x57ffffff]
[    0.620402] NET: Registered protocol family 2
[    0.663526] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.664358] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[    0.664808] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[    0.673228] TCP: Hash tables configured (established 131072 bind 65536)
[    0.673258] TCP reno registered
[    0.680222] NET: Registered protocol family 1
[    0.680737] Simple Boot Flag at 0x79 set to 0x1
[    0.683287] Microcode Update Driver: v2.00
<tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[    0.683870] audit: initializing netlink socket (disabled)
[    0.683910] type=2000 audit(1244641972.683:1): initialized
[    0.691604] highmem bounce pool size: 64 pages
[    0.691617] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.699044] VFS: Disk quotas dquot_6.5.2
[    0.699279] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.701249] msgmni has been set to 1735
[    0.702239] alg: No test for stdrng (krng)
[    0.702504] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 252)
[    0.702529] io scheduler noop registered
[    0.702535] io scheduler anticipatory registered
[    0.702541] io scheduler deadline registered
[    0.702701] io scheduler cfq registered (default)
[    0.702724] pci 0000:00:02.0: Boot video device
[    0.703438] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.703467] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.703969] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.703997] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.704627] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.704654] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.705212] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.705990] ALI M7101 PMU not found.
[    0.706288] vesafb: framebuffer at 0xe0000000, mapped to
0xf8080000, using 3072k, total 32704k
[    0.706298] vesafb: mode is 1024x768x16, linelength=2048, pages=20
[    0.706304] vesafb: scrolling: redraw
[    0.706310] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.719349] Console: switching to colour frame buffer device 128x48
[    0.731754] fb0: VESA VGA frame buffer device
[    0.732444] ACPI: AC Adapter [AC] (on-line)
[    0.733001] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.735290] ACPI: Lid Switch [LID]
[    0.735777] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.735979] ACPI: Power Button [PBTN]
[    0.736251] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.736450] ACPI: Sleep Button [SBTN]
[    0.739007] ACPI: SSDT 3d390957 002C3 (v01  PmRef   BspIst 00003000
INTL 20050624)
[    0.740265] ACPI: SSDT 3d390df1 005C6 (v01  PmRef   BspCst 00003001
INTL 20050624)
[    0.742690] Monitor-Mwait will be used to enter C-1 state
[    0.742748] Monitor-Mwait will be used to enter C-2 state
[    0.742803] Monitor-Mwait will be used to enter C-3 state
[    0.742824] Marking TSC unstable due to TSC halts in idle
[    0.743212] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.743626] processor ACPI_CPU:00: registered as cooling_device0
[    0.743776] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.744662] ACPI: SSDT 3d390c1a 001D7 (v01  PmRef    ApIst 00003000
INTL 20050624)
[    0.745954] ACPI: SSDT 3d3913b7 0008D (v01  PmRef    ApCst 00003000
INTL 20050624)
[    0.747684] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.747950] processor ACPI_CPU:01: registered as cooling_device1
[    0.748103] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.779251] thermal LNXTHERM:01: registered as thermal_zone0
[    0.779407] ACPI: Thermal Zone [THM] (40 C)
[    0.789324] Non-volatile memory driver v1.3
[    0.789924] i8k: unable to get SMM BIOS version
[    0.795389] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal
Zotto (dz-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org)
[    0.801496] Linux agpgart interface v0.103
[    0.807223] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45
Express Chipset
[    0.813615] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[    0.823157] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.828783] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
seconds, margin is 60 seconds).
[    0.834449] Hangcheck: Using get_cycles().
[    0.840129] [drm] Initialized drm 1.1.0 20060810
[    0.845900] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.851510] pci 0000:00:02.0: setting latency timer to 64
[    0.853393] mtrr: type mismatch for e0000000,10000000 old:
write-back new: write-combining
[    0.859094] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    0.864847] pci 0000:00:02.0: irq 27 for MSI/MSI-X
[    0.899636] acpi device:36: registered as cooling_device2
[    0.909181] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input3
[    0.915032] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    0.921668] ACPI Warning (nspredef-0437): \_SB_.PCI0.VID2._DOD:
Return Package has no elements (empty) [20090320]
[    0.928086] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3b/input/input4
[    0.934343] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[    0.940746] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.947172] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.959945] brd: module loaded
[    0.966931] ACPI: Battery Slot [BAT0] (battery present)
[    0.968480] loop: module loaded
[    0.968818] Loading iSCSI transport class v2.0-870.
[    0.985627] Driver 'sd' needs updating - please use bus_type methods
[    0.992894] Driver 'sr' needs updating - please use bus_type methods
[    0.999559] ahci 0000:00:1f.2: version 3.0
[    0.999580] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.005879] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    1.006004] ahci: SSS flag set, parallel bus scan disabled
[    1.012188] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3
Gbps 0x33 impl SATA mode
[    1.018355] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led
clo pio slum part ems
[    1.024482] ahci 0000:00:1f.2: setting latency timer to 64
[    1.027788] scsi0 : ahci
[    1.034390] scsi1 : ahci
[    1.040551] scsi2 : ahci
[    1.046571] scsi3 : ahci
[    1.052412] scsi4 : ahci
[    1.058238] scsi5 : ahci
[    1.064654] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port
0xfed1c900 irq 28
[    1.070202] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port
0xfed1c980 irq 28
[    1.075644] ata3: DUMMY
[    1.081001] ata4: DUMMY
[    1.086245] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port
0xfed1cb00 irq 28
[    1.091691] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port
0xfed1cb80 irq 28
[    1.097768] tg3.c:v3.98 (February 25, 2009)
[    1.103116] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.108517] tg3 0000:09:00.0: setting latency timer to 64
[    1.114294] tg3 0000:09:00.0: PME# disabled
[    1.129403] eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express)
MAC address 00:21:9b:f5:60:0f
[    1.134860] eth0: attached PHY is 5722/5756 (10/100/1000Base-T
Ethernet) (WireSpeed[1])
[    1.140372] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.145913] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.151626] sky2 driver version 1.22
[    1.157864] PPP generic driver version 2.4.2
[    1.163510] PPP Deflate Compression module registered
[    1.168869] PPP BSD Compression module registered
[    1.174635] PPP MPPE Compression module registered
[    1.179906] NET: Registered protocol family 24
[    1.185131] PPPoL2TP kernel driver, V1.0
[    1.190305] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
max=256) (6 bit encapsulation enabled).
[    1.195684] CSLIP: code copyright 1989 Regents of the University of
California.
[    1.201037] SLIP linefill/keepalive option.
[    1.206650] console [netcon0] enabled
[    1.211843] netconsole: network logging started
[    1.217088] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0262]
[    1.420039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.426291] ata1.00: ATA-8: ST9160310AS, DE04, max UDMA/133
[    1.431217] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
[    1.437590] ata1.00: configured for UDMA/133
[    1.453911] scsi 0:0:0:0: Direct-Access     ATA      ST9160310AS
  DE04 PQ: 0 ANSI: 5
[    1.459880] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors:
(160 GB/149 GiB)
[    1.464818] sd 0:0:0:0: [sda] Write Protect is off
[    1.469676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.469738] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    1.475201]  sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.739158]  sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.810125] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.200038] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.218017] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D500, max UDMA/100
[    2.223086] ata2.00: applying bridge limits
[    2.242814] ata2.00: configured for UDMA/100
[    2.265712] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW
TS-L633A D500 PQ: 0 ANSI: 5
[    2.278295] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[    2.283424] Uniform CD-ROM driver Revision: 3.20
[    2.289119] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.289353] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.480042] async/0 used greatest stack depth: 6432 bytes left
[    2.613368] ata5: SATA link down (SStatus 0 SControl 300)
[    2.950033] ata6: SATA link down (SStatus 4 SControl 300)
[    3.094412] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[    3.099887] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[    3.105290] pci_bus 0000:02: Raising subordinate bus# of parent bus
(#02) from #03 to #06
[    3.110927] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge
I/O window: 0x2000 - 0x2fff
[    3.116611] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge
Memory window: 0xf6700000 - 0xf67fffff
[    3.122347] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge
Memory window: 0x50000000 - 0x53ffffff
[    3.380380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.386060] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.391755] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.391761] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.397946] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[    3.407399] ehci_hcd 0000:00:1a.7: debug port 1
[    3.412810] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    3.412838] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    3.430867] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.436333] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.441769] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.447216] usb usb1: Product: EHCI Host Controller
[    3.452641] usb usb1: Manufacturer: Linux
2.6.30-rc8-00073-g3af968e-dirty ehci_hcd
[    3.458176] usb usb1: SerialNumber: 0000:00:1a.7
[    3.463986] usb usb1: configuration #1 chosen from 1 choice
[    3.469861] hub 1-0:1.0: USB hub found
[    3.475349] hub 1-0:1.0: 6 ports detected
[    3.481725] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.487066] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.487072] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.493677] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[    3.502980] ehci_hcd 0000:00:1d.7: debug port 1
[    3.508247] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.508275] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    3.527520] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.532729] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.537949] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.543159] usb usb2: Product: EHCI Host Controller
[    3.548303] usb usb2: Manufacturer: Linux
2.6.30-rc8-00073-g3af968e-dirty ehci_hcd
[    3.553493] usb usb2: SerialNumber: 0000:00:1d.7
[    3.558817] usb usb2: configuration #1 chosen from 1 choice
[    3.564088] hub 2-0:1.0: USB hub found
[    3.569102] hub 2-0:1.0: 6 ports detected
[    3.574486] uhci_hcd: USB Universal Host Controller Interface driver
[    3.579565] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.584744] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.584749] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.589988] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[    3.595042] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[    3.600132] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.605155] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.610124] usb usb3: Product: UHCI Host Controller
[    3.615033] usb usb3: Manufacturer: Linux
2.6.30-rc8-00073-g3af968e-dirty uhci_hcd
[    3.620036] usb usb3: SerialNumber: 0000:00:1a.0
[    3.625181] usb usb3: configuration #1 chosen from 1 choice
[    3.630272] hub 3-0:1.0: USB hub found
[    3.635304] hub 3-0:1.0: 2 ports detected
[    3.640579] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    3.645605] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.645610] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.650633] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[    3.655559] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[    3.660486] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.665468] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.670368] usb usb4: Product: UHCI Host Controller
[    3.675217] usb usb4: Manufacturer: Linux
2.6.30-rc8-00073-g3af968e-dirty uhci_hcd
[    3.680167] usb usb4: SerialNumber: 0000:00:1a.1
[    3.685275] usb usb4: configuration #1 chosen from 1 choice
[    3.690338] hub 4-0:1.0: USB hub found
[    3.695260] hub 4-0:1.0: 2 ports detected
[    3.700504] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.705491] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    3.705496] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    3.710540] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[    3.715516] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[    3.720450] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.725352] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.730268] usb usb5: Product: UHCI Host Controller
[    3.735162] usb usb5: Manufacturer: Linux
2.6.30-rc8-00073-g3af968e-dirty uhci_hcd
[    3.740207] usb usb5: SerialNumber: 0000:00:1a.2
[    3.745368] usb usb5: configuration #1 chosen from 1 choice
[    3.750528] hub 5-0:1.0: USB hub found
[    3.755487] hub 5-0:1.0: 2 ports detected
[    3.760728] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.765767] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.765773] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.770917] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[    3.775975] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[    3.781036] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.786061] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.791057] usb usb6: Product: UHCI Host Controller
[    3.796000] usb usb6: Manufacturer: Linux
2.6.30-rc8-00073-g3af968e-dirty uhci_hcd
[    3.801057] usb usb6: SerialNumber: 0000:00:1d.0
[    3.806266] usb usb6: configuration #1 chosen from 1 choice
[    3.811481] hub 6-0:1.0: USB hub found
[    3.816494] hub 6-0:1.0: 2 ports detected
[    3.821763] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    3.826806] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.826811] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.831918] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[    3.836995] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[    3.842019] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.847174] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.852174] usb usb7: Product: UHCI Host Controller
[    3.857110] usb usb7: Manufacturer: Linux
2.6.30-rc8-00073-g3af968e-dirty uhci_hcd
[    3.862122] usb usb7: SerialNumber: 0000:00:1d.1
[    3.867296] usb usb7: configuration #1 chosen from 1 choice
[    3.872424] hub 7-0:1.0: USB hub found
[    3.877435] hub 7-0:1.0: 2 ports detected
[    3.882693] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.887738] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.887744] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.892839] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[    3.897908] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    3.902934] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    3.907957] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.912955] usb usb8: Product: UHCI Host Controller
[    3.917894] usb usb8: Manufacturer: Linux
2.6.30-rc8-00073-g3af968e-dirty uhci_hcd
[    3.922908] usb usb8: SerialNumber: 0000:00:1d.2
[    3.928083] usb usb8: configuration #1 chosen from 1 choice
[    3.933213] hub 8-0:1.0: USB hub found
[    3.938223] hub 8-0:1.0: 2 ports detected
[    3.943574] Initializing USB Mass Storage driver...
[    3.948646] usbcore: registered new interface driver usb-storage
[    3.953624] USB Mass Storage support registered.
[    3.958924] usbcore: registered new interface driver libusual
[    3.964124] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[    3.969644] i8042.c: Warning: Keylock active.
[    3.978461] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.983475] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.988577] mice: PS/2 mouse device common for all mice
[    3.994798] rtc_cmos 00:03: RTC can wake from S4
[    3.999955] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.004941] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.009999] i2c /dev entries driver
[    4.015177] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level,
low) -> IRQ 19
[    4.020702] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[    4.026007] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
[    4.031435] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[    4.036943] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
[    4.042286] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.047439] iTCO_vendor_support: vendor-support=0
[    4.053016] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[    4.059280] cpuidle: using governor ladder
[    4.066054] cpuidle: using governor menu
[    4.071475] sdhci: Secure Digital Host Controller Interface driver
[    4.076735] sdhci: Copyright(c) Pierre Ossman
[    4.081993] sdhci-pci 0000:02:01.2: SDHCI controller found
[1180:0822] (rev 21)
[    4.087335] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[    4.095018] Registered led device: mmc0::
[    4.101502] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
[    4.106968] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    4.112274] wbsd: Copyright(c) Pierre Ossman
[    4.118134] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[    4.125975] usbcore: registered new interface driver hiddev
[    4.131469] usbcore: registered new interface driver usbhid
[    4.136749] usbhid: v2.6:USB HID core driver
[    4.142286] Advanced Linux Sound Architecture Driver Version 1.0.20.
[    4.147621] ALSA device list:
[    4.152969]   No soundcards found.
[    4.158271] Netfilter messages via NETLINK v0.30.
[    4.163634] nf_conntrack version 0.5.0 (15672 buckets, 62688 max)
[    4.169742] ctnetlink v0.93: registering with nfnetlink.
[    4.177022] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.182390] TCP cubic registered
[    4.187603] NET: Registered protocol family 17
[    4.192810] lib80211: common routines for IEEE802.11 drivers
[    4.198050] lib80211_crypt: registered algorithm 'NULL'
[    4.200165] Using IPI No-Shortcut mode
[    4.205899] PM: Checking image partition /dev/sda1
[    4.205945] PM: Resume from partition 8:1
[    4.205947] PM: Checking hibernation image.
[    4.206469] PM: Resume from disk failed.
[    4.206525] registered taskstats version 1
[    4.212064]   Magic number: 13:467:887
[    4.217301] graphics fb0: hash matches
[    4.222468] pci 0000:00:1f.0: hash matches
[    4.227611] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    4.358041] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
[    4.385850] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input7
[    4.401122] md: Waiting for all devices to be available before autodetect
[    4.411896] md: If you don't use raid, use raid=noautodetect
[    4.425489] md: Autodetecting RAID arrays.
[    4.436302] md: Scanned 0 and added 0 devices.
[    4.447071] md: autorun ...
[    4.457748] md: ... autorun DONE.
[    4.500170] Clocksource tsc unstable (delta = -145677310 ns)
[    4.746988] kjournald starting.  Commit interval 5 seconds
[    4.758301] EXT3-fs: mounted filesystem with writeback data mode.
[    4.768973] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
[    4.779485] Freeing unused kernel memory: 352k freed
[    4.790942] Write protecting the kernel text: 3380k
[    4.801727] Write protecting the kernel read-only data: 1812k
[    5.899973] mount used greatest stack depth: 5948 bytes left
[    7.978308] ACPI: WMI: Mapper loaded
[    8.186011] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.265705] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[f67ff800-f67fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    8.674803] modprobe used greatest stack depth: 5944 bytes left
[    8.828771] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
[    8.839561] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.567091] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[464fc0001679c05c]
[    9.984187] hda_intel: azx_get_response timeout, switching to
polling mode: last cmd=0x00af0900
[    9.990814] input: HDA Intel Mic at Ext Right Jack as
/devices/pci0000:00/0000:00:1b.0/input/input8
[    9.996429] input: HDA Intel Line Out at Sep Left Jack as
/devices/pci0000:00/0000:00:1b.0/input/input9
[   10.002010] input: HDA Intel HP Out at Ext Right Jack as
/devices/pci0000:00/0000:00:1b.0/input/input10
[   10.392541] Adding 1004020k swap on /dev/sda1.  Priority:-1
extents:1 across:1004020k
[   12.184854] EXT3 FS on sda2, internal journal
[   16.740574] kjournald starting.  Commit interval 5 seconds
[   16.752927] EXT3 FS on sda3, internal journal
[   16.764614] EXT3-fs: mounted filesystem with writeback data mode.
[   17.122130] EXT4-fs: barriers enabled
[   17.150008] kjournald2 starting: pid 1591, dev sda5:8, commit
interval 5 seconds
[   17.161686] EXT4 FS on sda5, internal journal on sda5:8
[   17.173313] EXT4-fs: delayed allocation enabled
[   17.184967] EXT4-fs: file extents enabled
[   17.202993] EXT4-fs: mballoc enabled
[   17.214770] EXT4-fs: mounted filesystem sda5 with ordered data mode
[   17.957655] rc.S used greatest stack depth: 5860 bytes left
[   26.878033] Bluetooth: Core ver 2.15
[   26.878286] NET: Registered protocol family 31
[   26.878293] Bluetooth: HCI device and connection manager initialized
[   26.878480] Bluetooth: HCI socket layer initialized
[   26.970122] Bluetooth: L2CAP ver 2.13
[   26.970130] Bluetooth: L2CAP socket layer initialized
[   27.376654] Bluetooth: SCO (Voice Link) ver 0.6
[   27.376662] Bluetooth: SCO socket layer initialized
[   27.600955] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.600964] Bluetooth: BNEP filters: protocol multicast
[   29.672484] smbd used greatest stack depth: 5636 bytes left
[   42.089890] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[   42.089900] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N
hits, 0 breaks, 0 lost
[   42.089907] EXT4-fs: mballoc: 0 generated and it took 0
[   42.089914] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[   66.478950] mtrr: type mismatch for e0000000,10000000 old:
write-back new: write-combining
[  148.258364]
[  148.258365] =======================================================
[  148.258558] [ INFO: possible circular locking dependency detected ]
[  148.258707] 2.6.30-rc8-00073-g3af968e-dirty #61
[  148.258815] -------------------------------------------------------
[  148.258970] 94cpufreq/2095 is trying to acquire lock:
[  148.259090]  (&(&dbs_info->work)->work){+.+...}, at: [<c10365c6>]
__cancel_work_timer+0x8c/0x18c
[  148.259320]
[  148.259320] but task is already holding lock:
[  148.259459]  (dbs_mutex){+.+.+.}, at: [<c1276243>]
cpufreq_governor_dbs+0x1ee/0x267
[  148.259659]
[  148.259660] which lock already depends on the new lock.
[  148.259661]
[  148.259856]
[  148.259856] the existing dependency chain (in reverse order) is:
[  148.260040]
[  148.260041] -> #2 (dbs_mutex){+.+.+.}:
[  148.260183]        [<c1047cfb>] __lock_acquire+0x91e/0xaa9
[  148.260321]        [<c1047f21>] lock_acquire+0x9b/0xbe
[  148.260450]        [<c1347d3c>] __mutex_lock_common+0x35/0x2d2
[  148.260596]        [<c1348071>] mutex_lock_nested+0x2e/0x36
[  148.260737]        [<c12760c5>] cpufreq_governor_dbs+0x70/0x267
[  148.260837]        [<c12738b7>] __cpufreq_governor+0x66/0x9d
[  148.260837]        [<c127403c>] __cpufreq_set_policy+0x16f/0x1dd
[  148.260837]        [<c1274965>] cpufreq_add_dev+0x4d4/0x5f6
[  148.260837]        [<c11c4619>] sysdev_driver_register+0x96/0xe5
[  148.260837]        [<c1274ca9>] cpufreq_register_driver+0xa1/0x168
[  148.260837]        [<c15758cf>] acpi_cpufreq_init+0x99/0xab
[  148.260837]        [<c1001137>] do_one_initcall+0x4a/0x11a
[  148.260837]        [<c156d50a>] kernel_init+0xfe/0x14f
[  148.260837]        [<c1003d1f>] kernel_thread_helper+0x7/0x10
[  148.260837]        [<ffffffff>] 0xffffffff
[  148.260837]
[  148.260837] -> #1 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}:
[  148.260837]        [<c1047cfb>] __lock_acquire+0x91e/0xaa9
[  148.260837]        [<c1047f21>] lock_acquire+0x9b/0xbe
[  148.260837]        [<c134824b>] down_write+0x2f/0x4b
[  148.260837]        [<c1273ea5>] lock_policy_rwsem_write+0x33/0x5b
[  148.260837]        [<c1275e5f>] do_dbs_timer+0x45/0x23b
[  148.260837]        [<c1036b9e>] worker_thread+0x170/0x23c
[  148.260837]        [<c10393e1>] kthread+0x45/0x6c
[  148.260837]        [<c1003d1f>] kernel_thread_helper+0x7/0x10
[  148.260837]        [<ffffffff>] 0xffffffff
[  148.260837]
[  148.260837] -> #0 (&(&dbs_info->work)->work){+.+...}:
[  148.260837]        [<c1047c0b>] __lock_acquire+0x82e/0xaa9
[  148.260837]        [<c1047f21>] lock_acquire+0x9b/0xbe
[  148.260837]        [<c10365f1>] __cancel_work_timer+0xb7/0x18c
[  148.260837]        [<c10366d1>] cancel_delayed_work_sync+0xb/0xd
[  148.260837]        [<c1276252>] cpufreq_governor_dbs+0x1fd/0x267
[  148.260837]        [<c12738b7>] __cpufreq_governor+0x66/0x9d
[  148.260837]        [<c127401b>] __cpufreq_set_policy+0x14e/0x1dd
[  148.260837]        [<c1274334>] store_scaling_governor+0x159/0x188
[  148.260837]        [<c1274ac9>] store+0x42/0x5b
[  148.260837]        [<c10cce91>] sysfs_write_file+0xb8/0xe3
[  148.260837]        [<c1090478>] vfs_write+0x82/0xdc
[  148.260837]        [<c1090567>] sys_write+0x3b/0x5d
[  148.260837]        [<c10032dd>] syscall_call+0x7/0xb
[  148.260837]        [<ffffffff>] 0xffffffff
[  148.260837]
[  148.260837] other info that might help us debug this:
[  148.260837]
[  148.260837] 2 locks held by 94cpufreq/2095:
[  148.260837]  #0:  (&buffer->mutex){+.+.+.}, at: [<c10ccdfe>]
sysfs_write_file+0x25/0xe3
[  148.260837]  #1:  (dbs_mutex){+.+.+.}, at: [<c1276243>]
cpufreq_governor_dbs+0x1ee/0x267
[  148.260837]
[  148.260837] stack backtrace:
[  148.260837] Pid: 2095, comm: 94cpufreq Not tainted
2.6.30-rc8-00073-g3af968e-dirty #61
[  148.260837] Call Trace:
[  148.260837]  [<c1046881>] print_circular_bug_tail+0x5d/0x68
[  148.260837]  [<c1047c0b>] __lock_acquire+0x82e/0xaa9
[  148.260837]  [<c1046401>] ? mark_lock+0x1e/0x1c7
[  148.260837]  [<c1047f21>] lock_acquire+0x9b/0xbe
[  148.260837]  [<c10365c6>] ? __cancel_work_timer+0x8c/0x18c
[  148.260837]  [<c10365f1>] __cancel_work_timer+0xb7/0x18c
[  148.260837]  [<c10365c6>] ? __cancel_work_timer+0x8c/0x18c
[  148.260837]  [<c104670f>] ? trace_hardirqs_on_caller+0x10a/0x146
[  148.260837]  [<c1347fcf>] ? __mutex_lock_common+0x2c8/0x2d2
[  148.260837]  [<c10366d1>] cancel_delayed_work_sync+0xb/0xd
[  148.260837]  [<c1276252>] cpufreq_governor_dbs+0x1fd/0x267
[  148.260837]  [<c12738b7>] __cpufreq_governor+0x66/0x9d
[  148.260837]  [<c127401b>] __cpufreq_set_policy+0x14e/0x1dd
[  148.260837]  [<c12741db>] ? store_scaling_governor+0x0/0x188
[  148.260837]  [<c1274334>] store_scaling_governor+0x159/0x188
[  148.260837]  [<c12741b3>] ? handle_update+0x0/0x28
[  148.260837]  [<c1273ea5>] ? lock_policy_rwsem_write+0x33/0x5b
[  148.260837]  [<c12741db>] ? store_scaling_governor+0x0/0x188
[  148.260837]  [<c1274ac9>] store+0x42/0x5b
[  148.260837]  [<c10cce91>] sysfs_write_file+0xb8/0xe3
[  148.260837]  [<c1090478>] vfs_write+0x82/0xdc
[  148.260837]  [<c10ccdd9>] ? sysfs_write_file+0x0/0xe3
[  148.260837]  [<c1090567>] sys_write+0x3b/0x5d
[  148.260837]  [<c10032dd>] syscall_call+0x7/0xb
[  148.797693] PM: Syncing filesystems ... done.
[  148.799360] PM: Preparing system for mem sleep
[  148.799373] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  148.799690] Freezing remaining freezable tasks ... (elapsed 0.00
seconds) done.
[  148.799748] PM: Entering mem sleep
[  148.799762] Suspending console(s) (use no_console_suspend to debug)
[  149.307030] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  149.307259] sd 0:0:0:0: [sda] Stopping disk
[  149.668140] ACPI handle has no context!
[  149.668147] sdhci-pci 0000:02:01.2: PME# disabled
[  149.668154] sdhci-pci 0000:02:01.2: PCI INT C disabled
[  149.668162] ACPI handle has no context!
[  149.685306] ACPI handle has no context!
[  149.763578] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[  149.763658] ehci_hcd 0000:00:1d.7: PME# disabled
[  149.776892] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[  149.776967] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[  149.777039] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[  149.803584] HDA Intel 0000:00:1b.0: PCI INT A disabled
[  149.816892] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[  149.816972] ehci_hcd 0000:00:1a.7: PME# disabled
[  149.830241] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[  149.830316] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[  149.830385] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[  149.838864] ACPI: Preparing to enter system sleep state S3
[  149.880668] Disabling non-boot CPUs ...
[  149.983338] CPU 1 is now offline
[  149.983340] lockdep: fixing up alternatives.
[  149.983343] SMP alternatives: switching to UP code
[  149.987218] CPU1 is down
[  149.987275] Extended CMOS year: 2000
[  149.987275] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[  149.987275] Back to C!
[  149.987275] Extended CMOS year: 2000
[  149.987275] Enabling non-boot CPUs ...
[  149.987275] lockdep: fixing up alternatives.
[  149.987275] SMP alternatives: switching to SMP code
[  149.990636] Booting processor 1 APIC 0x1 ip 0x6000
[  149.986895] Initializing CPU#1
[  149.986895] Calibrating delay using timer specific routine..
3991.29 BogoMIPS (lpj=6650077)
[  149.986895] CPU: L1 I cache: 32K, L1 D cache: 32K
[  149.986895] CPU: L2 cache: 2048K
[  149.986895] CPU: Physical Processor ID: 0
[  149.986895] CPU: Processor Core ID: 1
[  149.986895] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[  150.085030] CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
[  150.087499] Switched to high resolution mode on CPU 1
[  150.096815] microcode: failed to init CPU1
[  150.097503] CPU1 is up
[  150.097506] ACPI: Waking up from system sleep state S3
[  150.287126] pci 0000:00:02.0: restoring config space at offset 0xf
(was 0x100, writing 0x10b)
[  150.287137] pci 0000:00:02.0: restoring config space at offset 0x8
(was 0x1, writing 0xefe9)
[  150.287143] pci 0000:00:02.0: restoring config space at offset 0x6
(was 0xc, writing 0xe000000c)
[  150.287152] pci 0000:00:02.0: restoring config space at offset 0x1
(was 0x900007, writing 0x900403)
[  150.287188] pci 0000:00:02.1: restoring config space at offset 0x4
(was 0x4, writing 0xf6b00004)
[  150.287195] pci 0000:00:02.1: restoring config space at offset 0x1
(was 0x900000, writing 0x900007)
[  150.287213] uhci_hcd 0000:00:1a.0: restoring config space at offset
0xf (was 0x100, writing 0x10a)
[  150.287231] uhci_hcd 0000:00:1a.0: restoring config space at offset
0x8 (was 0x1, writing 0x6f61)
[  150.287248] uhci_hcd 0000:00:1a.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[  150.287271] uhci_hcd 0000:00:1a.1: restoring config space at offset
0xf (was 0x200, writing 0x207)
[  150.287288] uhci_hcd 0000:00:1a.1: restoring config space at offset
0x8 (was 0x1, writing 0x6f81)
[  150.287305] uhci_hcd 0000:00:1a.1: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[  150.287329] uhci_hcd 0000:00:1a.2: restoring config space at offset
0xf (was 0x300, writing 0x305)
[  150.287346] uhci_hcd 0000:00:1a.2: restoring config space at offset
0x8 (was 0x1, writing 0x6fa1)
[  150.287363] uhci_hcd 0000:00:1a.2: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[  150.287420] ehci_hcd 0000:00:1a.7: restoring config space at offset
0x1 (was 0x2900106, writing 0x2900102)
[  150.287461] HDA Intel 0000:00:1b.0: restoring config space at
offset 0xf (was 0x100, writing 0x107)
[  150.287485] HDA Intel 0000:00:1b.0: restoring config space at
offset 0x4 (was 0xfebfc004, writing 0xf6afc004)
[  150.287492] HDA Intel 0000:00:1b.0: restoring config space at
offset 0x3 (was 0x0, writing 0x10)
[  150.287500] HDA Intel 0000:00:1b.0: restoring config space at
offset 0x1 (was 0x100000, writing 0x100102)
[  150.287538] pcieport-driver 0000:00:1c.0: restoring config space at
offset 0xf (was 0x100, writing 0x20100)
[  150.287554] pcieport-driver 0000:00:1c.0: restoring config space at
offset 0x9 (was 0x10001, writing 0x1fff1)
[  150.287560] pcieport-driver 0000:00:1c.0: restoring config space at
offset 0x8 (was 0x0, writing 0xfff0)
[  150.287567] pcieport-driver 0000:00:1c.0: restoring config space at
offset 0x7 (was 0x20000000, writing 0x200000f0)
[  150.287574] pcieport-driver 0000:00:1c.0: restoring config space at
offset 0x6 (was 0x0, writing 0xb0b00)
[  150.287584] pcieport-driver 0000:00:1c.0: restoring config space at
offset 0x3 (was 0x810000, writing 0x810010)
[  150.287593] pcieport-driver 0000:00:1c.0: restoring config space at
offset 0x1 (was 0x100000, writing 0x100507)
[  150.287659] pcieport-driver 0000:00:1c.1: restoring config space at
offset 0xf (was 0x200, writing 0x20200)
[  150.287675] pcieport-driver 0000:00:1c.1: restoring config space at
offset 0x9 (was 0x10001, writing 0x1fff1)
[  150.287681] pcieport-driver 0000:00:1c.1: restoring config space at
offset 0x8 (was 0x0, writing 0xf690f690)
[  150.287688] pcieport-driver 0000:00:1c.1: restoring config space at
offset 0x7 (was 0x20000000, writing 0x200000f0)
[  150.287695] pcieport-driver 0000:00:1c.1: restoring config space at
offset 0x6 (was 0x0, writing 0xc0c00)
[  150.287706] pcieport-driver 0000:00:1c.1: restoring config space at
offset 0x3 (was 0x810000, writing 0x810010)
[  150.287714] pcieport-driver 0000:00:1c.1: restoring config space at
offset 0x1 (was 0x100000, writing 0x100507)
[  150.287780] pcieport-driver 0000:00:1c.4: restoring config space at
offset 0xf (was 0x100, writing 0x20100)
[  150.287795] pcieport-driver 0000:00:1c.4: restoring config space at
offset 0x9 (was 0x10001, writing 0x1fff1)
[  150.287802] pcieport-driver 0000:00:1c.4: restoring config space at
offset 0x8 (was 0x0, writing 0xf680f680)
[  150.287809] pcieport-driver 0000:00:1c.4: restoring config space at
offset 0x7 (was 0x20000000, writing 0x200000f0)
[  150.287816] pcieport-driver 0000:00:1c.4: restoring config space at
offset 0x6 (was 0x0, writing 0x90900)
[  150.287826] pcieport-driver 0000:00:1c.4: restoring config space at
offset 0x3 (was 0x810000, writing 0x810010)
[  150.287835] pcieport-driver 0000:00:1c.4: restoring config space at
offset 0x1 (was 0x100000, writing 0x100407)
[  150.287917] uhci_hcd 0000:00:1d.0: restoring config space at offset
0x1 (was 0x2900005, writing 0x2900001)
[  150.287940] uhci_hcd 0000:00:1d.1: restoring config space at offset
0xf (was 0x200, writing 0x207)
[  150.287957] uhci_hcd 0000:00:1d.1: restoring config space at offset
0x8 (was 0x1, writing 0x6f21)
[  150.287974] uhci_hcd 0000:00:1d.1: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[  150.287998] uhci_hcd 0000:00:1d.2: restoring config space at offset
0xf (was 0x300, writing 0x305)
[  150.288015] uhci_hcd 0000:00:1d.2: restoring config space at offset
0x8 (was 0x1, writing 0x6f41)
[  150.288032] uhci_hcd 0000:00:1d.2: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[  150.288088] ehci_hcd 0000:00:1d.7: restoring config space at offset
0x1 (was 0x2900106, writing 0x2900102)
[  150.288129] pci 0000:00:1e.0: restoring config space at offset 0x9
(was 0x1fff1, writing 0x53f15001)
[  150.288138] pci 0000:00:1e.0: restoring config space at offset 0x7
(was 0x2280e0f0, writing 0x22802020)
[  150.288144] pci 0000:00:1e.0: restoring config space at offset 0x6
(was 0x20020200, writing 0x20060200)
[  150.288209] pci 0000:00:1f.0: restoring config space at offset 0x1
(was 0x2100007, writing 0x2100107)
[  150.288247] ahci 0000:00:1f.2: restoring config space at offset 0xf
(was 0x400, writing 0x40a)
[  150.288276] ahci 0000:00:1f.2: restoring config space at offset 0x1
(was 0x2b00007, writing 0x2b00407)
[  150.288325] i801_smbus 0000:00:1f.3: restoring config space at
offset 0xf (was 0x200, writing 0x204)
[  150.288349] i801_smbus 0000:00:1f.3: restoring config space at
offset 0x4 (was 0x4, writing 0xf6afbf04)
[  150.288359] i801_smbus 0000:00:1f.3: restoring config space at
offset 0x1 (was 0x2800001, writing 0x2800103)
[  150.288629] pci 0000:0c:00.0: restoring config space at offset 0xf
(was 0x100, writing 0x104)
[  150.288694] pci 0000:0c:00.0: restoring config space at offset 0x4
(was 0x4, writing 0xf69fc004)
[  150.288707] pci 0000:0c:00.0: restoring config space at offset 0x3
(was 0x0, writing 0x10)
[  150.288726] pci 0000:0c:00.0: restoring config space at offset 0x1
(was 0x100000, writing 0x100106)
[  150.288895] tg3 0000:09:00.0: restoring config space at offset 0x3
(was 0x0, writing 0x10)
[  150.288906] tg3 0000:09:00.0: restoring config space at offset 0x1
(was 0x100000, writing 0x100106)
[  150.288954] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0xf (was 0x7000100, writing 0x580010a)
[  150.288961] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0xe (was 0x0, writing 0x24fc)
[  150.288967] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0xd (was 0x0, writing 0x2400)
[  150.288974] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0xc (was 0x0, writing 0x20fc)
[  150.288980] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0xb (was 0x0, writing 0x2000)
[  150.288987] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0xa (was 0x0, writing 0x57fff000)
[  150.288994] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0x9 (was 0x0, writing 0x54000000)
[  150.289001] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0x8 (was 0x0, writing 0x53fff000)
[  150.289008] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0x7 (was 0x0, writing 0x50000000)
[  150.289014] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0x6 (was 0x0, writing 0xb0060302)
[  150.289023] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0x4 (was 0x0, writing 0xf6700000)
[  150.289030] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0x3 (was 0x820000, writing 0x82a800)
[  150.289039] yenta_cardbus 0000:02:01.0: restoring config space at
offset 0x1 (was 0x2100000, writing 0x2100007)
[  150.289067] ohci1394 0000:02:01.1: restoring config space at offset
0xf (was 0x4020200, writing 0x4020204)
[  150.289096] ohci1394 0000:02:01.1: restoring config space at offset
0x3 (was 0x800000, writing 0x804010)
[  150.289105] ohci1394 0000:02:01.1: restoring config space at offset
0x1 (was 0x2100000, writing 0x2100106)
[  150.289131] sdhci-pci 0000:02:01.2: restoring config space at
offset 0xf (was 0x300, writing 0x303)
[  150.289157] sdhci-pci 0000:02:01.2: restoring config space at
offset 0x4 (was 0x0, writing 0xf67ff600)
[  150.289164] sdhci-pci 0000:02:01.2: restoring config space at
offset 0x3 (was 0x800000, writing 0x804010)
[  150.289172] sdhci-pci 0000:02:01.2: restoring config space at
offset 0x1 (was 0x2100000, writing 0x2100106)
[  150.289198] pci 0000:02:01.3: restoring config space at offset 0xf
(was 0x300, writing 0x303)
[  150.289224] pci 0000:02:01.3: restoring config space at offset 0x4
(was 0x0, writing 0xf67ff700)
[  150.289231] pci 0000:02:01.3: restoring config space at offset 0x3
(was 0x800000, writing 0x804010)
[  150.289240] pci 0000:02:01.3: restoring config space at offset 0x1
(was 0x2100000, writing 0x2100106)
[  150.388775] pci 0000:00:02.0: PME# disabled
[  150.388783] pci 0000:00:02.1: PME# disabled
[  150.388835] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  150.388843] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[  150.388871] usb usb3: root hub lost power or was reset
[  150.388933] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[  150.388940] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[  150.388968] usb usb4: root hub lost power or was reset
[  150.389028] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[  150.389035] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[  150.389061] usb usb5: root hub lost power or was reset
[  150.389137] ehci_hcd 0000:00:1a.7: PME# disabled
[  150.389142] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[  150.389149] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[  150.389158] ehci_hcd 0000:00:1a.7: PME# disabled
[  150.389223] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
[  150.389230] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  150.389305] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  150.389312] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  150.389341] usb usb6: root hub lost power or was reset
[  150.389402] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[  150.389409] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  150.389435] usb usb7: root hub lost power or was reset
[  150.389496] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[  150.389503] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  150.389530] usb usb8: root hub lost power or was reset
[  150.389607] ehci_hcd 0000:00:1d.7: PME# disabled
[  150.389612] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[  150.389619] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[  150.389627] ehci_hcd 0000:00:1d.7: PME# disabled
[  150.389639] pci 0000:00:1e.0: setting latency timer to 64
[  150.389735] ahci 0000:00:1f.2: setting latency timer to 64
[  150.393274] pci 0000:0c:00.0: PME# disabled
[  150.585588] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[f67ff800-f67fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[  150.591698] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[  150.592725] pci 0000:02:01.3: PME# disabled
[  150.592877] pci 0000:00:02.0: setting latency timer to 64
[  150.593937] sd 0:0:0:0: [sda] Starting disk
[  150.706892] ata5: SATA link down (SStatus 0 SControl 300)
[  150.706923] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  150.706962] ata6: SATA link down (SStatus 4 SControl 300)
[  150.780108] ata2.00: configured for UDMA/100
[  150.843555] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[  150.843560] ata2: irq_stat 0x40000001
[  150.907765] ata2.00: configured for UDMA/100
[  150.907769] ata2: EH complete
[  152.093558] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  152.097390] ata1.00: configured for UDMA/133
[  152.110220] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[  152.110224] ata1: irq_stat 0x00400040, connection status changed
[  152.113980] ata1.00: configured for UDMA/133
[  152.113985] ata1: EH complete
[  152.226974] PM: Finishing wakeup.
[  152.226979] Restarting tasks ... done.

>
> Thanks,
>
> Mathieu
>
>
>> > My test machine is currently busy running long formal verifications, and
>> > therefore unavailable for kernel patch testing. It compiles fine on a
>> > 2.6.30-rc5 kernel with my (now mainlined) cpufreq patches applied.
>> >
>> > Mathieu
>> >
>> >
>> > remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)
>> >
>> > commit  42a06f2166f2f6f7bf04f32b4e823eacdceafdc9
>> >
>> > Missed a call site for CPUFREQ_GOV_STOP to remove the rwlock taken around the
>> > teardown. To make a long story short, the rwlock write-lock causes a circular
>> > dependency with cancel_delayed_work_sync(), because the timer handler takes the
>> > read lock.
>> >
>> > Note that all callers to __cpufreq_set_policy are taking the rwsem. All sysfs
>> > callers (writers) hold the write rwsem at the earliest sysfs calling stage.
>> >
>> > However, the rwlock write-lock is not needed upon governor stop.
>> >
>> > Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
>> > CC: rjw-KKrjLPT3xs0@public.gmane.org
>> > CC: mingo-X9Un+BFzKDI@public.gmane.org
>> > CC: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>> > CC: Pekka Enberg <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org>
>> > CC: Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> > CC: "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>
>> > CC: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>
>> > CC: trenn-l3A5Bk7waGM@public.gmane.org
>> > CC: sven.wegener-sQQoR7IzGU7R7s880joybQ@public.gmane.org
>> > CC: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>> > CC: cpufreq-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> > ---
>> >  drivers/cpufreq/cpufreq.c |   11 ++++++++++-
>> >  1 file changed, 10 insertions(+), 1 deletion(-)
>> >
>> > Index: linux-2.6-lttng/drivers/cpufreq/cpufreq.c
>> > ===================================================================
>> > --- linux-2.6-lttng.orig/drivers/cpufreq/cpufreq.c      2009-06-08 10:20:48.000000000 -0400
>> > +++ linux-2.6-lttng/drivers/cpufreq/cpufreq.c   2009-06-08 10:48:52.000000000 -0400
>> > @@ -1697,8 +1697,17 @@ static int __cpufreq_set_policy(struct c
>> >                        dprintk("governor switch\n");
>> >
>> >                        /* end old governor */
>> > -                       if (data->governor)
>> > +                       if (data->governor) {
>> > +                               /*
>> > +                                * Need to release the rwsem around governor
>> > +                                * stop due to lock dependency between
>> > +                                * cancel_delayed_work_sync and the read lock
>> > +                                * taken in the delayed work handler.
>> > +                                */
>> > +                               unlock_policy_rwsem_write(data->cpu);
>> >                                __cpufreq_governor(data, CPUFREQ_GOV_STOP);
>> > +                               lock_policy_rwsem_write(data->cpu);
>> > +                       }
>> >
>> >                        /* start new governor */
>> >                        data->governor = policy->governor;
>> >
>> >
>> > --
>> > Mathieu Desnoyers
>> > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> > Please read the FAQ at  http://www.tux.org/lkml/
>> >
>>
>>
>>
>> --
>> Regards
>> dave
>>
>
> --
> Mathieu Desnoyers
> OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
>



-- 
Regards
dave

Re: [Bug #13475] suspend/hibernate lockdep warning

[Simon Holm Thøgersen]

[-- Attachment #1: Type: text/plain, Size: 4876 bytes --]

man, 08 06 2009 kl. 10:32 -0400, skrev Dave Jones: 
> On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
>  
>  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
>  > > > >> Subject         : suspend/hibernate lockdep warning
>  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
>  > > > 
>  > > > I suspect the following commit, after revert this patch I test 5 times
>  > > > without lockdep warnings.
>  > > > 
>  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
>  > > > Author: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
>  > > > Date:   Sun May 17 10:30:45 2009 -0400
>  > > > 
>  > > > 	[CPUFREQ] fix timer teardown in ondemand governor
>  > > 
>  > > The patch is probably not at fault here. I suspect it's some latent bug
>  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
>  > > any case, Mathieu, can you take a look at this please?
>  > 
>  > Yes, it's been looked at and discussed on the cpufreq ML. The short
>  > answer is that they plan to re-engineer cpufreq and remove the policy
>  > rwlock taken around almost every operations at the cpufreq level.
>  > 
>  > The short-term solution, which is recognised as ugly, would be do to the
>  > following before doing the cancel_delayed_work_sync() :
>  > 
>  > unlock policy rwlock write lock
>  > 
>  > lock policy rwlock write lock
>  > 
>  > It basically works because this rwlock is unneeded for teardown, hence
>  > the future re-work planned.
>  > 
>  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
>  > of Ph.D. thesis due for the beginning of July.
>  
> I'm kinda scared to touch this code at all for .30 due to the number of
> unexpected gotchas we seem to run into every time we touch something
> locking related.  So I'm inclined to just live with the lockdep warning
> for .30, and see how the real fixes look for .31, and push them back
> as -stable updates if they work out.

Unfortunately I don't think it is just theoretical, I've actually hit
the following (that haven't got anything to do with suspend/hibernate)

INFO: task cpufreqd:4676 blocked for more than 120 seconds.
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 cpufreqd      D eee2ac60     0  4676      1
  ee01bd68 00000086 eee2aad0 eee2ac60 00000533 eee2aad0 eee2ac60 0002b16f
  00000000 eee2ac60 7fffffff 7fffffff eee2ac60 7fffffff 7fffffff 00000000
  ee01bd70 c03117ee ee01bdbc c0311c0c eee2aad0 eecf6900 eee2aad0 eecf6900
 Call Trace:
  [<c03117ee>] schedule+0x12/0x24
  [<c0311c0c>] schedule_timeout+0x17/0x170
  [<c011a4f7>] ? __wake_up+0x2b/0x51
  [<c0311afd>] wait_for_common+0xc4/0x135
  [<c011a694>] ? default_wake_function+0x0/0xd
  [<c0311be0>] wait_for_completion+0x12/0x14
  [<c012bc6a>] __cancel_work_timer+0xfe/0x129
  [<c012b635>] ? wq_barrier_func+0x0/0xd
  [<c012bca0>] cancel_delayed_work_sync+0xb/0xd
  [<f20948f9>] cpufreq_governor_dbs+0x22e/0x291 [cpufreq_ondemand]
  [<c02af857>] __cpufreq_governor+0x65/0x9d
  [<c02af960>] __cpufreq_set_policy+0xd1/0x11f
  [<c02b02ae>] store_scaling_governor+0x18a/0x1b2
  [<c02b09a5>] ? handle_update+0x0/0xd
  [<c02b0124>] ? store_scaling_governor+0x0/0x1b2
  [<c02b08c9>] store+0x48/0x61
  [<c01acbf4>] sysfs_write_file+0xb4/0xdf
  [<c01acb40>] ? sysfs_write_file+0x0/0xdf
  [<c0175535>] vfs_write+0x8a/0x104
  [<c0175648>] sys_write+0x3b/0x60
  [<c0103110>] sysenter_do_call+0x12/0x2c
 INFO: task kondemand/0:4956 blocked for more than 120 seconds.
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 kondemand/0   D 00000533     0  4956      2
  ee1d9efc 00000046 c011815f 00000533 071148de ee1e0080 ee1e0210 00000000
  c03ff478 9189e633 00000082 c03ff478 ee1e0210 c04159f4 c04159f0 00000000
  ee1d9f04 c03117ee ee1d9f28 c0313104 ee1d9f30 c04159f4 ee1e0080 c01183be
 Call Trace:
  [<c011815f>] ? update_curr+0x6c/0x14b
  [<c03117ee>] schedule+0x12/0x24
  [<c0313104>] rwsem_down_failed_common+0x150/0x16e
  [<c01183be>] ? dequeue_task_fair+0x51/0x56
  [<c031313d>] rwsem_down_write_failed+0x1b/0x23
  [<c031317e>] call_rwsem_down_write_failed+0x6/0x8
  [<c03125dd>] ? down_write+0x14/0x16
  [<c02b0460>] lock_policy_rwsem_write+0x1d/0x33
  [<f20944aa>] do_dbs_timer+0x45/0x266 [cpufreq_ondemand]
  [<c012b8f7>] worker_thread+0x165/0x212
  [<f2094465>] ? do_dbs_timer+0x0/0x266 [cpufreq_ondemand]
  [<c012e639>] ? autoremove_wake_function+0x0/0x33
  [<c012b792>] ? worker_thread+0x0/0x212
  [<c012e278>] kthread+0x42/0x67
  [<c012e236>] ? kthread+0x0/0x67
  [<c01038eb>] kernel_thread_helper+0x7/0x10

I've only seen it once in 5 boots and CONFIG_PROVELOCKING does not give any
warnings about this, though it does yell when switching governor as reported
by others in bug #13493.

Let's hope Mathieu nails it, though I know he's busy with his thesis.


Simon Holm Thøgersen

[-- Attachment #2: config-non-debug --]
[-- Type: text/plain, Size: 56980 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30
# Wed Jun 10 18:17:11 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_VMI is not set
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_CLOCK is not set
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not set
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
# CONFIG_X86_UP_IOAPIC is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
# CONFIG_X86_RESERVE_LOW_64K is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hda5"
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
# CONFIG_IPW2200_QOS is not set
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
CONFIG_USB_GSPCA_SPCA561=m
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC_INPUT_EVDEV is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=1
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SYSPROF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_EVENT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_LGUEST=m
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

Re: [Bug #13475] suspend/hibernate lockdep warning

[Mathieu Desnoyers]

* Simon Holm Thøgersen (odie-t5LvXY1cjzpaa/9Udqfwiw@public.gmane.org) wrote:
> man, 08 06 2009 kl. 10:32 -0400, skrev Dave Jones: 
> > On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
> >  
> >  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> >  > > > >> Subject         : suspend/hibernate lockdep warning
> >  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> >  > > > 
> >  > > > I suspect the following commit, after revert this patch I test 5 times
> >  > > > without lockdep warnings.
> >  > > > 
> >  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
> >  > > > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> >  > > > Date:   Sun May 17 10:30:45 2009 -0400
> >  > > > 
> >  > > > 	[CPUFREQ] fix timer teardown in ondemand governor
> >  > > 
> >  > > The patch is probably not at fault here. I suspect it's some latent bug
> >  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
> >  > > any case, Mathieu, can you take a look at this please?
> >  > 
> >  > Yes, it's been looked at and discussed on the cpufreq ML. The short
> >  > answer is that they plan to re-engineer cpufreq and remove the policy
> >  > rwlock taken around almost every operations at the cpufreq level.
> >  > 
> >  > The short-term solution, which is recognised as ugly, would be do to the
> >  > following before doing the cancel_delayed_work_sync() :
> >  > 
> >  > unlock policy rwlock write lock
> >  > 
> >  > lock policy rwlock write lock
> >  > 
> >  > It basically works because this rwlock is unneeded for teardown, hence
> >  > the future re-work planned.
> >  > 
> >  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
> >  > of Ph.D. thesis due for the beginning of July.
> >  
> > I'm kinda scared to touch this code at all for .30 due to the number of
> > unexpected gotchas we seem to run into every time we touch something
> > locking related.  So I'm inclined to just live with the lockdep warning
> > for .30, and see how the real fixes look for .31, and push them back
> > as -stable updates if they work out.
> 
> Unfortunately I don't think it is just theoretical, I've actually hit
> the following (that haven't got anything to do with suspend/hibernate)
> 
> INFO: task cpufreqd:4676 blocked for more than 120 seconds.
>  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>  cpufreqd      D eee2ac60     0  4676      1
>   ee01bd68 00000086 eee2aad0 eee2ac60 00000533 eee2aad0 eee2ac60 0002b16f
>   00000000 eee2ac60 7fffffff 7fffffff eee2ac60 7fffffff 7fffffff 00000000
>   ee01bd70 c03117ee ee01bdbc c0311c0c eee2aad0 eecf6900 eee2aad0 eecf6900
>  Call Trace:
>   [<c03117ee>] schedule+0x12/0x24
>   [<c0311c0c>] schedule_timeout+0x17/0x170
>   [<c011a4f7>] ? __wake_up+0x2b/0x51
>   [<c0311afd>] wait_for_common+0xc4/0x135
>   [<c011a694>] ? default_wake_function+0x0/0xd
>   [<c0311be0>] wait_for_completion+0x12/0x14
>   [<c012bc6a>] __cancel_work_timer+0xfe/0x129
>   [<c012b635>] ? wq_barrier_func+0x0/0xd
>   [<c012bca0>] cancel_delayed_work_sync+0xb/0xd
>   [<f20948f9>] cpufreq_governor_dbs+0x22e/0x291 [cpufreq_ondemand]
>   [<c02af857>] __cpufreq_governor+0x65/0x9d
>   [<c02af960>] __cpufreq_set_policy+0xd1/0x11f
>   [<c02b02ae>] store_scaling_governor+0x18a/0x1b2
>   [<c02b09a5>] ? handle_update+0x0/0xd
>   [<c02b0124>] ? store_scaling_governor+0x0/0x1b2
>   [<c02b08c9>] store+0x48/0x61
>   [<c01acbf4>] sysfs_write_file+0xb4/0xdf
>   [<c01acb40>] ? sysfs_write_file+0x0/0xdf
>   [<c0175535>] vfs_write+0x8a/0x104
>   [<c0175648>] sys_write+0x3b/0x60
>   [<c0103110>] sysenter_do_call+0x12/0x2c
>  INFO: task kondemand/0:4956 blocked for more than 120 seconds.
>  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>  kondemand/0   D 00000533     0  4956      2
>   ee1d9efc 00000046 c011815f 00000533 071148de ee1e0080 ee1e0210 00000000
>   c03ff478 9189e633 00000082 c03ff478 ee1e0210 c04159f4 c04159f0 00000000
>   ee1d9f04 c03117ee ee1d9f28 c0313104 ee1d9f30 c04159f4 ee1e0080 c01183be
>  Call Trace:
>   [<c011815f>] ? update_curr+0x6c/0x14b
>   [<c03117ee>] schedule+0x12/0x24
>   [<c0313104>] rwsem_down_failed_common+0x150/0x16e
>   [<c01183be>] ? dequeue_task_fair+0x51/0x56
>   [<c031313d>] rwsem_down_write_failed+0x1b/0x23
>   [<c031317e>] call_rwsem_down_write_failed+0x6/0x8
>   [<c03125dd>] ? down_write+0x14/0x16
>   [<c02b0460>] lock_policy_rwsem_write+0x1d/0x33
>   [<f20944aa>] do_dbs_timer+0x45/0x266 [cpufreq_ondemand]
>   [<c012b8f7>] worker_thread+0x165/0x212
>   [<f2094465>] ? do_dbs_timer+0x0/0x266 [cpufreq_ondemand]
>   [<c012e639>] ? autoremove_wake_function+0x0/0x33
>   [<c012b792>] ? worker_thread+0x0/0x212
>   [<c012e278>] kthread+0x42/0x67
>   [<c012e236>] ? kthread+0x0/0x67
>   [<c01038eb>] kernel_thread_helper+0x7/0x10
> 
> I've only seen it once in 5 boots and CONFIG_PROVELOCKING does not give any
> warnings about this, though it does yell when switching governor as reported
> by others in bug #13493.
> 
> Let's hope Mathieu nails it, though I know he's busy with his thesis.
> 

Thanks for the lockdep reports,

I'm currently looking into it, and it's not pretty. Basically we have :

A
  B
(means B nested in A)

work
  read rwlock policy

dbs_mutex
  work
    read rwlock policy

write rwlock policy
  dbs_mutex

So the added dbs_mutex <- work <- rwlock policy dependency (for proper
teardown) is firing the reverse dependency between policy rwlock and
dbs_mutex.

The real way to fix this is to do not take the rwlock policy around
non-policy-related actions, like governor START/STOP doing worker
creation/teardown.

One simple short-term solution would be to take a mutex outside of the
policy rwlock write lock in cpufreq.c. This mutex would be the
equivalent of dbs_mutex "lifted" outside of the rwlock write lock. For
teardown, we only need to hold this mutex, not the rwlock write lock.
Then we can remove the dbs_mutex from the governors.

But looking at cpufreq.c's cpufreq_add_dev() is very much like kicking a
wasp nest: a lot of error paths are not handled properly, and I fear
someone will have to go through the code, fix the currently incorrect
code paths, and then add the lifted mutex.

I currently have no time for implementation due to my thesis, but I'll
be happy to review a patch.

Mathieu

-- 
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

Re: [Bug #13475] suspend/hibernate lockdep warning

[Pallipadi, Venkatesh]

On Thu, Jun 11, 2009 at 08:23:29AM -0700, Mathieu Desnoyers wrote:
> * Simon Holm Thøgersen (odie-t5LvXY1cjzpaa/9Udqfwiw@public.gmane.org) wrote:
> > man, 08 06 2009 kl. 10:32 -0400, skrev Dave Jones: 
> > > On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
> > >  
> > >  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> > >  > > > >> Subject         : suspend/hibernate lockdep warning
> > >  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> > >  > > > 
> > >  > > > I suspect the following commit, after revert this patch I test 5 times
> > >  > > > without lockdep warnings.
> > >  > > > 
> > >  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
> > >  > > > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> > >  > > > Date:   Sun May 17 10:30:45 2009 -0400
> > >  > > > 
> > >  > > > 	[CPUFREQ] fix timer teardown in ondemand governor
> > >  > > 
> > >  > > The patch is probably not at fault here. I suspect it's some latent bug
> > >  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
> > >  > > any case, Mathieu, can you take a look at this please?
> > >  > 
> > >  > Yes, it's been looked at and discussed on the cpufreq ML. The short
> > >  > answer is that they plan to re-engineer cpufreq and remove the policy
> > >  > rwlock taken around almost every operations at the cpufreq level.
> > >  > 
> > >  > The short-term solution, which is recognised as ugly, would be do to the
> > >  > following before doing the cancel_delayed_work_sync() :
> > >  > 
> > >  > unlock policy rwlock write lock
> > >  > 
> > >  > lock policy rwlock write lock
> > >  > 
> > >  > It basically works because this rwlock is unneeded for teardown, hence
> > >  > the future re-work planned.
> > >  > 
> > >  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
> > >  > of Ph.D. thesis due for the beginning of July.
> > >  
> > > I'm kinda scared to touch this code at all for .30 due to the number of
> > > unexpected gotchas we seem to run into every time we touch something
> > > locking related.  So I'm inclined to just live with the lockdep warning
> > > for .30, and see how the real fixes look for .31, and push them back
> > > as -stable updates if they work out.
> > 
> > Unfortunately I don't think it is just theoretical, I've actually hit
> > the following (that haven't got anything to do with suspend/hibernate)
> > 
> > INFO: task cpufreqd:4676 blocked for more than 120 seconds.
> >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> >  cpufreqd      D eee2ac60     0  4676      1
> >   ee01bd68 00000086 eee2aad0 eee2ac60 00000533 eee2aad0 eee2ac60 0002b16f
> >   00000000 eee2ac60 7fffffff 7fffffff eee2ac60 7fffffff 7fffffff 00000000
> >   ee01bd70 c03117ee ee01bdbc c0311c0c eee2aad0 eecf6900 eee2aad0 eecf6900
> >  Call Trace:
> >   [<c03117ee>] schedule+0x12/0x24
> >   [<c0311c0c>] schedule_timeout+0x17/0x170
> >   [<c011a4f7>] ? __wake_up+0x2b/0x51
> >   [<c0311afd>] wait_for_common+0xc4/0x135
> >   [<c011a694>] ? default_wake_function+0x0/0xd
> >   [<c0311be0>] wait_for_completion+0x12/0x14
> >   [<c012bc6a>] __cancel_work_timer+0xfe/0x129
> >   [<c012b635>] ? wq_barrier_func+0x0/0xd
> >   [<c012bca0>] cancel_delayed_work_sync+0xb/0xd
> >   [<f20948f9>] cpufreq_governor_dbs+0x22e/0x291 [cpufreq_ondemand]
> >   [<c02af857>] __cpufreq_governor+0x65/0x9d
> >   [<c02af960>] __cpufreq_set_policy+0xd1/0x11f
> >   [<c02b02ae>] store_scaling_governor+0x18a/0x1b2
> >   [<c02b09a5>] ? handle_update+0x0/0xd
> >   [<c02b0124>] ? store_scaling_governor+0x0/0x1b2
> >   [<c02b08c9>] store+0x48/0x61
> >   [<c01acbf4>] sysfs_write_file+0xb4/0xdf
> >   [<c01acb40>] ? sysfs_write_file+0x0/0xdf
> >   [<c0175535>] vfs_write+0x8a/0x104
> >   [<c0175648>] sys_write+0x3b/0x60
> >   [<c0103110>] sysenter_do_call+0x12/0x2c
> >  INFO: task kondemand/0:4956 blocked for more than 120 seconds.
> >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> >  kondemand/0   D 00000533     0  4956      2
> >   ee1d9efc 00000046 c011815f 00000533 071148de ee1e0080 ee1e0210 00000000
> >   c03ff478 9189e633 00000082 c03ff478 ee1e0210 c04159f4 c04159f0 00000000
> >   ee1d9f04 c03117ee ee1d9f28 c0313104 ee1d9f30 c04159f4 ee1e0080 c01183be
> >  Call Trace:
> >   [<c011815f>] ? update_curr+0x6c/0x14b
> >   [<c03117ee>] schedule+0x12/0x24
> >   [<c0313104>] rwsem_down_failed_common+0x150/0x16e
> >   [<c01183be>] ? dequeue_task_fair+0x51/0x56
> >   [<c031313d>] rwsem_down_write_failed+0x1b/0x23
> >   [<c031317e>] call_rwsem_down_write_failed+0x6/0x8
> >   [<c03125dd>] ? down_write+0x14/0x16
> >   [<c02b0460>] lock_policy_rwsem_write+0x1d/0x33
> >   [<f20944aa>] do_dbs_timer+0x45/0x266 [cpufreq_ondemand]
> >   [<c012b8f7>] worker_thread+0x165/0x212
> >   [<f2094465>] ? do_dbs_timer+0x0/0x266 [cpufreq_ondemand]
> >   [<c012e639>] ? autoremove_wake_function+0x0/0x33
> >   [<c012b792>] ? worker_thread+0x0/0x212
> >   [<c012e278>] kthread+0x42/0x67
> >   [<c012e236>] ? kthread+0x0/0x67
> >   [<c01038eb>] kernel_thread_helper+0x7/0x10
> > 
> > I've only seen it once in 5 boots and CONFIG_PROVELOCKING does not give any
> > warnings about this, though it does yell when switching governor as reported
> > by others in bug #13493.
> > 
> > Let's hope Mathieu nails it, though I know he's busy with his thesis.
> > 
> 
> Thanks for the lockdep reports,
> 
> I'm currently looking into it, and it's not pretty. Basically we have :
> 
> A
>   B
> (means B nested in A)
> 
> work
>   read rwlock policy
> 
> dbs_mutex
>   work
>     read rwlock policy
> 
> write rwlock policy
>   dbs_mutex
> 
> So the added dbs_mutex <- work <- rwlock policy dependency (for proper
> teardown) is firing the reverse dependency between policy rwlock and
> dbs_mutex.
> 
> The real way to fix this is to do not take the rwlock policy around
> non-policy-related actions, like governor START/STOP doing worker
> creation/teardown.
> 
> One simple short-term solution would be to take a mutex outside of the
> policy rwlock write lock in cpufreq.c. This mutex would be the
> equivalent of dbs_mutex "lifted" outside of the rwlock write lock. For
> teardown, we only need to hold this mutex, not the rwlock write lock.
> Then we can remove the dbs_mutex from the governors.
> 
> But looking at cpufreq.c's cpufreq_add_dev() is very much like kicking a
> wasp nest: a lot of error paths are not handled properly, and I fear
> someone will have to go through the code, fix the currently incorrect
> code paths, and then add the lifted mutex.
> 
> I currently have no time for implementation due to my thesis, but I'll
> be happy to review a patch.
> 

How about below patch on top of Mathieu's patch here
http://marc.info/?l=linux-kernel&m=124448150529838&w=2

[PATCH] cpufreq: Eliminate lockdep issue with dbs_mutex and policy_rwsem

This removes the unneeded dependency of 
write rwlock policy
  dbs_mutex

dbs_mutex does not have anything to do with timer_init and timer_exit. It
is just to protect dbs tunables in sysfs cpufreq/ondemand and is not
needed to be held during timer init, exit as well as during governor limit
changes.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/cpufreq/cpufreq_ondemand.c |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index e741c33..1c94ff5 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -352,8 +352,8 @@ static ssize_t store_powersave_bias(struct cpufreq_policy *unused,
 
 	mutex_lock(&dbs_mutex);
 	dbs_tuners_ins.powersave_bias = input;
-	ondemand_powersave_bias_init();
 	mutex_unlock(&dbs_mutex);
+	ondemand_powersave_bias_init();
 
 	return count;
 }
@@ -626,14 +626,14 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 
 			dbs_tuners_ins.sampling_rate = def_sampling_rate;
 		}
+		mutex_unlock(&dbs_mutex);
 		dbs_timer_init(this_dbs_info);
 
-		mutex_unlock(&dbs_mutex);
 		break;
 
 	case CPUFREQ_GOV_STOP:
-		mutex_lock(&dbs_mutex);
 		dbs_timer_exit(this_dbs_info);
+		mutex_lock(&dbs_mutex);
 		sysfs_remove_group(&policy->kobj, &dbs_attr_group);
 		dbs_enable--;
 		mutex_unlock(&dbs_mutex);
@@ -641,14 +641,12 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		break;
 
 	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&dbs_mutex);
 		if (policy->max < this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(this_dbs_info->cur_policy,
 				policy->max, CPUFREQ_RELATION_H);
 		else if (policy->min > this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(this_dbs_info->cur_policy,
 				policy->min, CPUFREQ_RELATION_L);
-		mutex_unlock(&dbs_mutex);
 		break;
 	}
 	return 0;
-- 
1.6.0.6

Re: [Bug #13475] suspend/hibernate lockdep warning

[Mathieu Desnoyers]

* Pallipadi, Venkatesh (venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org) wrote:
> On Thu, Jun 11, 2009 at 08:23:29AM -0700, Mathieu Desnoyers wrote:
> > * Simon Holm Thøgersen (odie-t5LvXY1cjzpaa/9Udqfwiw@public.gmane.org) wrote:
> > > man, 08 06 2009 kl. 10:32 -0400, skrev Dave Jones: 
> > > > On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
> > > >  
> > > >  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> > > >  > > > >> Subject         : suspend/hibernate lockdep warning
> > > >  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> > > >  > > > 
> > > >  > > > I suspect the following commit, after revert this patch I test 5 times
> > > >  > > > without lockdep warnings.
> > > >  > > > 
> > > >  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
> > > >  > > > Author: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
> > > >  > > > Date:   Sun May 17 10:30:45 2009 -0400
> > > >  > > > 
> > > >  > > > 	[CPUFREQ] fix timer teardown in ondemand governor
> > > >  > > 
> > > >  > > The patch is probably not at fault here. I suspect it's some latent bug
> > > >  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
> > > >  > > any case, Mathieu, can you take a look at this please?
> > > >  > 
> > > >  > Yes, it's been looked at and discussed on the cpufreq ML. The short
> > > >  > answer is that they plan to re-engineer cpufreq and remove the policy
> > > >  > rwlock taken around almost every operations at the cpufreq level.
> > > >  > 
> > > >  > The short-term solution, which is recognised as ugly, would be do to the
> > > >  > following before doing the cancel_delayed_work_sync() :
> > > >  > 
> > > >  > unlock policy rwlock write lock
> > > >  > 
> > > >  > lock policy rwlock write lock
> > > >  > 
> > > >  > It basically works because this rwlock is unneeded for teardown, hence
> > > >  > the future re-work planned.
> > > >  > 
> > > >  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
> > > >  > of Ph.D. thesis due for the beginning of July.
> > > >  
> > > > I'm kinda scared to touch this code at all for .30 due to the number of
> > > > unexpected gotchas we seem to run into every time we touch something
> > > > locking related.  So I'm inclined to just live with the lockdep warning
> > > > for .30, and see how the real fixes look for .31, and push them back
> > > > as -stable updates if they work out.
> > > 
> > > Unfortunately I don't think it is just theoretical, I've actually hit
> > > the following (that haven't got anything to do with suspend/hibernate)
> > > 
> > > INFO: task cpufreqd:4676 blocked for more than 120 seconds.
> > >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > >  cpufreqd      D eee2ac60     0  4676      1
> > >   ee01bd68 00000086 eee2aad0 eee2ac60 00000533 eee2aad0 eee2ac60 0002b16f
> > >   00000000 eee2ac60 7fffffff 7fffffff eee2ac60 7fffffff 7fffffff 00000000
> > >   ee01bd70 c03117ee ee01bdbc c0311c0c eee2aad0 eecf6900 eee2aad0 eecf6900
> > >  Call Trace:
> > >   [<c03117ee>] schedule+0x12/0x24
> > >   [<c0311c0c>] schedule_timeout+0x17/0x170
> > >   [<c011a4f7>] ? __wake_up+0x2b/0x51
> > >   [<c0311afd>] wait_for_common+0xc4/0x135
> > >   [<c011a694>] ? default_wake_function+0x0/0xd
> > >   [<c0311be0>] wait_for_completion+0x12/0x14
> > >   [<c012bc6a>] __cancel_work_timer+0xfe/0x129
> > >   [<c012b635>] ? wq_barrier_func+0x0/0xd
> > >   [<c012bca0>] cancel_delayed_work_sync+0xb/0xd
> > >   [<f20948f9>] cpufreq_governor_dbs+0x22e/0x291 [cpufreq_ondemand]
> > >   [<c02af857>] __cpufreq_governor+0x65/0x9d
> > >   [<c02af960>] __cpufreq_set_policy+0xd1/0x11f
> > >   [<c02b02ae>] store_scaling_governor+0x18a/0x1b2
> > >   [<c02b09a5>] ? handle_update+0x0/0xd
> > >   [<c02b0124>] ? store_scaling_governor+0x0/0x1b2
> > >   [<c02b08c9>] store+0x48/0x61
> > >   [<c01acbf4>] sysfs_write_file+0xb4/0xdf
> > >   [<c01acb40>] ? sysfs_write_file+0x0/0xdf
> > >   [<c0175535>] vfs_write+0x8a/0x104
> > >   [<c0175648>] sys_write+0x3b/0x60
> > >   [<c0103110>] sysenter_do_call+0x12/0x2c
> > >  INFO: task kondemand/0:4956 blocked for more than 120 seconds.
> > >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > >  kondemand/0   D 00000533     0  4956      2
> > >   ee1d9efc 00000046 c011815f 00000533 071148de ee1e0080 ee1e0210 00000000
> > >   c03ff478 9189e633 00000082 c03ff478 ee1e0210 c04159f4 c04159f0 00000000
> > >   ee1d9f04 c03117ee ee1d9f28 c0313104 ee1d9f30 c04159f4 ee1e0080 c01183be
> > >  Call Trace:
> > >   [<c011815f>] ? update_curr+0x6c/0x14b
> > >   [<c03117ee>] schedule+0x12/0x24
> > >   [<c0313104>] rwsem_down_failed_common+0x150/0x16e
> > >   [<c01183be>] ? dequeue_task_fair+0x51/0x56
> > >   [<c031313d>] rwsem_down_write_failed+0x1b/0x23
> > >   [<c031317e>] call_rwsem_down_write_failed+0x6/0x8
> > >   [<c03125dd>] ? down_write+0x14/0x16
> > >   [<c02b0460>] lock_policy_rwsem_write+0x1d/0x33
> > >   [<f20944aa>] do_dbs_timer+0x45/0x266 [cpufreq_ondemand]
> > >   [<c012b8f7>] worker_thread+0x165/0x212
> > >   [<f2094465>] ? do_dbs_timer+0x0/0x266 [cpufreq_ondemand]
> > >   [<c012e639>] ? autoremove_wake_function+0x0/0x33
> > >   [<c012b792>] ? worker_thread+0x0/0x212
> > >   [<c012e278>] kthread+0x42/0x67
> > >   [<c012e236>] ? kthread+0x0/0x67
> > >   [<c01038eb>] kernel_thread_helper+0x7/0x10
> > > 
> > > I've only seen it once in 5 boots and CONFIG_PROVELOCKING does not give any
> > > warnings about this, though it does yell when switching governor as reported
> > > by others in bug #13493.
> > > 
> > > Let's hope Mathieu nails it, though I know he's busy with his thesis.
> > > 
> > 
> > Thanks for the lockdep reports,
> > 
> > I'm currently looking into it, and it's not pretty. Basically we have :
> > 
> > A
> >   B
> > (means B nested in A)
> > 
> > work
> >   read rwlock policy
> > 
> > dbs_mutex
> >   work
> >     read rwlock policy
> > 
> > write rwlock policy
> >   dbs_mutex
> > 
> > So the added dbs_mutex <- work <- rwlock policy dependency (for proper
> > teardown) is firing the reverse dependency between policy rwlock and
> > dbs_mutex.
> > 
> > The real way to fix this is to do not take the rwlock policy around
> > non-policy-related actions, like governor START/STOP doing worker
> > creation/teardown.
> > 
> > One simple short-term solution would be to take a mutex outside of the
> > policy rwlock write lock in cpufreq.c. This mutex would be the
> > equivalent of dbs_mutex "lifted" outside of the rwlock write lock. For
> > teardown, we only need to hold this mutex, not the rwlock write lock.
> > Then we can remove the dbs_mutex from the governors.
> > 
> > But looking at cpufreq.c's cpufreq_add_dev() is very much like kicking a
> > wasp nest: a lot of error paths are not handled properly, and I fear
> > someone will have to go through the code, fix the currently incorrect
> > code paths, and then add the lifted mutex.
> > 
> > I currently have no time for implementation due to my thesis, but I'll
> > be happy to review a patch.
> > 
> 
> How about below patch on top of Mathieu's patch here
> http://marc.info/?l=linux-kernel&m=124448150529838&w=2
> 
> [PATCH] cpufreq: Eliminate lockdep issue with dbs_mutex and policy_rwsem
> 
> This removes the unneeded dependency of 
> write rwlock policy
>   dbs_mutex
> 
> dbs_mutex does not have anything to do with timer_init and timer_exit. It
> is just to protect dbs tunables in sysfs cpufreq/ondemand and is not
> needed to be held during timer init, exit as well as during governor limit
> changes.
> 

If this works, then it will likely need to be ported to the conservative
governor too.

Thanks,

Mathieu

> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/cpufreq/cpufreq_ondemand.c |    8 +++-----
>  1 files changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
> index e741c33..1c94ff5 100644
> --- a/drivers/cpufreq/cpufreq_ondemand.c
> +++ b/drivers/cpufreq/cpufreq_ondemand.c
> @@ -352,8 +352,8 @@ static ssize_t store_powersave_bias(struct cpufreq_policy *unused,
>  
>  	mutex_lock(&dbs_mutex);
>  	dbs_tuners_ins.powersave_bias = input;
> -	ondemand_powersave_bias_init();
>  	mutex_unlock(&dbs_mutex);
> +	ondemand_powersave_bias_init();
>  
>  	return count;
>  }
> @@ -626,14 +626,14 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
>  
>  			dbs_tuners_ins.sampling_rate = def_sampling_rate;
>  		}
> +		mutex_unlock(&dbs_mutex);
>  		dbs_timer_init(this_dbs_info);
>  
> -		mutex_unlock(&dbs_mutex);
>  		break;
>  
>  	case CPUFREQ_GOV_STOP:
> -		mutex_lock(&dbs_mutex);
>  		dbs_timer_exit(this_dbs_info);
> +		mutex_lock(&dbs_mutex);
>  		sysfs_remove_group(&policy->kobj, &dbs_attr_group);
>  		dbs_enable--;
>  		mutex_unlock(&dbs_mutex);
> @@ -641,14 +641,12 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
>  		break;
>  
>  	case CPUFREQ_GOV_LIMITS:
> -		mutex_lock(&dbs_mutex);
>  		if (policy->max < this_dbs_info->cur_policy->cur)
>  			__cpufreq_driver_target(this_dbs_info->cur_policy,
>  				policy->max, CPUFREQ_RELATION_H);
>  		else if (policy->min > this_dbs_info->cur_policy->cur)
>  			__cpufreq_driver_target(this_dbs_info->cur_policy,
>  				policy->min, CPUFREQ_RELATION_L);
> -		mutex_unlock(&dbs_mutex);
>  		break;
>  	}
>  	return 0;
> -- 
> 1.6.0.6
> 

-- 
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

Re: [Bug #13475] suspend/hibernate lockdep warning

[Thomas Renninger]

On Wednesday 17 June 2009 02:39:25 Pallipadi, Venkatesh wrote:
> On Thu, Jun 11, 2009 at 08:23:29AM -0700, Mathieu Desnoyers wrote:
> > * Simon Holm Thøgersen (odie@cs.aau.dk) wrote:
> > > man, 08 06 2009 kl. 10:32 -0400, skrev Dave Jones: 
> > > > On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
> > > >  
> > > >  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> > > >  > > > >> Subject         : suspend/hibernate lockdep warning
> > > >  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> > > >  > > > 
> > > >  > > > I suspect the following commit, after revert this patch I test 5 times
> > > >  > > > without lockdep warnings.
> > > >  > > > 
> > > >  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
> > > >  > > > Author: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
> > > >  > > > Date:   Sun May 17 10:30:45 2009 -0400
> > > >  > > > 
> > > >  > > > 	[CPUFREQ] fix timer teardown in ondemand governor
> > > >  > > 
> > > >  > > The patch is probably not at fault here. I suspect it's some latent bug
> > > >  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
> > > >  > > any case, Mathieu, can you take a look at this please?
> > > >  > 
> > > >  > Yes, it's been looked at and discussed on the cpufreq ML. The short
> > > >  > answer is that they plan to re-engineer cpufreq and remove the policy
> > > >  > rwlock taken around almost every operations at the cpufreq level.
> > > >  > 
> > > >  > The short-term solution, which is recognised as ugly, would be do to the
> > > >  > following before doing the cancel_delayed_work_sync() :
> > > >  > 
> > > >  > unlock policy rwlock write lock
> > > >  > 
> > > >  > lock policy rwlock write lock
> > > >  > 
> > > >  > It basically works because this rwlock is unneeded for teardown, hence
> > > >  > the future re-work planned.
> > > >  > 
> > > >  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
> > > >  > of Ph.D. thesis due for the beginning of July.
> > > >  
> > > > I'm kinda scared to touch this code at all for .30 due to the number of
> > > > unexpected gotchas we seem to run into every time we touch something
> > > > locking related.  So I'm inclined to just live with the lockdep warning
> > > > for .30, and see how the real fixes look for .31, and push them back
> > > > as -stable updates if they work out.
> > > 
> > > Unfortunately I don't think it is just theoretical, I've actually hit
> > > the following (that haven't got anything to do with suspend/hibernate)
> > > 
> > > INFO: task cpufreqd:4676 blocked for more than 120 seconds.
> > >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > >  cpufreqd      D eee2ac60     0  4676      1
> > >   ee01bd68 00000086 eee2aad0 eee2ac60 00000533 eee2aad0 eee2ac60 0002b16f
> > >   00000000 eee2ac60 7fffffff 7fffffff eee2ac60 7fffffff 7fffffff 00000000
> > >   ee01bd70 c03117ee ee01bdbc c0311c0c eee2aad0 eecf6900 eee2aad0 eecf6900
> > >  Call Trace:
> > >   [<c03117ee>] schedule+0x12/0x24
> > >   [<c0311c0c>] schedule_timeout+0x17/0x170
> > >   [<c011a4f7>] ? __wake_up+0x2b/0x51
> > >   [<c0311afd>] wait_for_common+0xc4/0x135
> > >   [<c011a694>] ? default_wake_function+0x0/0xd
> > >   [<c0311be0>] wait_for_completion+0x12/0x14
> > >   [<c012bc6a>] __cancel_work_timer+0xfe/0x129
> > >   [<c012b635>] ? wq_barrier_func+0x0/0xd
> > >   [<c012bca0>] cancel_delayed_work_sync+0xb/0xd
> > >   [<f20948f9>] cpufreq_governor_dbs+0x22e/0x291 [cpufreq_ondemand]
> > >   [<c02af857>] __cpufreq_governor+0x65/0x9d
> > >   [<c02af960>] __cpufreq_set_policy+0xd1/0x11f
> > >   [<c02b02ae>] store_scaling_governor+0x18a/0x1b2
> > >   [<c02b09a5>] ? handle_update+0x0/0xd
> > >   [<c02b0124>] ? store_scaling_governor+0x0/0x1b2
> > >   [<c02b08c9>] store+0x48/0x61
> > >   [<c01acbf4>] sysfs_write_file+0xb4/0xdf
> > >   [<c01acb40>] ? sysfs_write_file+0x0/0xdf
> > >   [<c0175535>] vfs_write+0x8a/0x104
> > >   [<c0175648>] sys_write+0x3b/0x60
> > >   [<c0103110>] sysenter_do_call+0x12/0x2c
> > >  INFO: task kondemand/0:4956 blocked for more than 120 seconds.
> > >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > >  kondemand/0   D 00000533     0  4956      2
> > >   ee1d9efc 00000046 c011815f 00000533 071148de ee1e0080 ee1e0210 00000000
> > >   c03ff478 9189e633 00000082 c03ff478 ee1e0210 c04159f4 c04159f0 00000000
> > >   ee1d9f04 c03117ee ee1d9f28 c0313104 ee1d9f30 c04159f4 ee1e0080 c01183be
> > >  Call Trace:
> > >   [<c011815f>] ? update_curr+0x6c/0x14b
> > >   [<c03117ee>] schedule+0x12/0x24
> > >   [<c0313104>] rwsem_down_failed_common+0x150/0x16e
> > >   [<c01183be>] ? dequeue_task_fair+0x51/0x56
> > >   [<c031313d>] rwsem_down_write_failed+0x1b/0x23
> > >   [<c031317e>] call_rwsem_down_write_failed+0x6/0x8
> > >   [<c03125dd>] ? down_write+0x14/0x16
> > >   [<c02b0460>] lock_policy_rwsem_write+0x1d/0x33
> > >   [<f20944aa>] do_dbs_timer+0x45/0x266 [cpufreq_ondemand]
> > >   [<c012b8f7>] worker_thread+0x165/0x212
> > >   [<f2094465>] ? do_dbs_timer+0x0/0x266 [cpufreq_ondemand]
> > >   [<c012e639>] ? autoremove_wake_function+0x0/0x33
> > >   [<c012b792>] ? worker_thread+0x0/0x212
> > >   [<c012e278>] kthread+0x42/0x67
> > >   [<c012e236>] ? kthread+0x0/0x67
> > >   [<c01038eb>] kernel_thread_helper+0x7/0x10
> > > 
> > > I've only seen it once in 5 boots and CONFIG_PROVELOCKING does not give any
> > > warnings about this, though it does yell when switching governor as reported
> > > by others in bug #13493.
> > > 
> > > Let's hope Mathieu nails it, though I know he's busy with his thesis.
> > > 
> > 
> > Thanks for the lockdep reports,
> > 
> > I'm currently looking into it, and it's not pretty. Basically we have :
> > 
> > A
> >   B
> > (means B nested in A)
> > 
> > work
> >   read rwlock policy
> > 
> > dbs_mutex
> >   work
> >     read rwlock policy
> > 
> > write rwlock policy
> >   dbs_mutex
> > 
> > So the added dbs_mutex <- work <- rwlock policy dependency (for proper
> > teardown) is firing the reverse dependency between policy rwlock and
> > dbs_mutex.
> > 
> > The real way to fix this is to do not take the rwlock policy around
> > non-policy-related actions, like governor START/STOP doing worker
> > creation/teardown.
> > 
> > One simple short-term solution would be to take a mutex outside of the
> > policy rwlock write lock in cpufreq.c. This mutex would be the
> > equivalent of dbs_mutex "lifted" outside of the rwlock write lock. For
> > teardown, we only need to hold this mutex, not the rwlock write lock.
> > Then we can remove the dbs_mutex from the governors.
> > 
> > But looking at cpufreq.c's cpufreq_add_dev() is very much like kicking a
> > wasp nest: a lot of error paths are not handled properly, and I fear
> > someone will have to go through the code, fix the currently incorrect
> > code paths, and then add the lifted mutex.
> > 
> > I currently have no time for implementation due to my thesis, but I'll
> > be happy to review a patch.
> > 
> 
> How about below patch on top of Mathieu's patch here
> http://marc.info/?l=linux-kernel&m=124448150529838&w=2
> 
> [PATCH] cpufreq: Eliminate lockdep issue with dbs_mutex and policy_rwsem
> 
> This removes the unneeded dependency of 
> write rwlock policy
>   dbs_mutex
> 
> dbs_mutex does not have anything to do with timer_init and timer_exit. It
> is just to protect dbs tunables in sysfs cpufreq/ondemand
Why is sysfs tunables protection needed at all?

The ondemand locking very much looks like taken over from the userspace
governor. There you need the lock because a write to set_speed directly
calls ->target.

What is urgently missing is a description for what the locks are
really used, not only in which case they deadlock.

From your comment above:
> dbs_mutex does not have anything to do with timer_init and timer_exit.
But this is what it seems to do?
If it's not needed to protect calling timer_init while in timer_exit
(or the other way around) and sysfs_create_group while
in sysfs_remove_group I think the mutex can be deleted.
What do you think about this patch (compile tested only and not
for .30)?

Is someone aware of any test scenarios I could run to try without
the mutex and run into trouble?
Do I totally miss something here or does this make sense?

Thanks,

      Thomas

-----

CPUFREQ ondemand: Remove unneeded dbs_mutex

There is no need to protect general (not per core) ondemand sysfs variables
against per core governor (de-)activation (GOV_START/GOV_STOP).

It must just be assured that these are only initialized once, before userspace
can modify them (otherwise userspace modifications will be overriden by
re-initializing the general variables).
This should already be the case.

Signed-off-by: Thomas Renninger <trenn@suse.de>

---
 drivers/cpufreq/cpufreq_ondemand.c |   64 +++++++------------------------------
 1 file changed, 13 insertions(+), 51 deletions(-)

Index: linux-2.6.29-master/drivers/cpufreq/cpufreq_ondemand.c
===================================================================
--- linux-2.6.29-master.orig/drivers/cpufreq/cpufreq_ondemand.c
+++ linux-2.6.29-master/drivers/cpufreq/cpufreq_ondemand.c
@@ -17,7 +17,6 @@
 #include <linux/cpu.h>
 #include <linux/jiffies.h>
 #include <linux/kernel_stat.h>
-#include <linux/mutex.h>
 #include <linux/hrtimer.h>
 #include <linux/tick.h>
 #include <linux/ktime.h>
@@ -91,16 +90,6 @@ static DEFINE_PER_CPU(struct cpu_dbs_inf
 
 static unsigned int dbs_enable;	/* number of CPUs using this policy */
 
-/*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- */
-static DEFINE_MUTEX(dbs_mutex);
-
 static struct workqueue_struct	*kondemand_wq;
 
 static struct dbs_tuners {
@@ -266,14 +255,7 @@ static ssize_t store_sampling_rate(struc
 	int ret;
 	ret = sscanf(buf, "%u", &input);
 
-	mutex_lock(&dbs_mutex);
-	if (ret != 1) {
-		mutex_unlock(&dbs_mutex);
-		return -EINVAL;
-	}
 	dbs_tuners_ins.sampling_rate = max(input, minimum_sampling_rate());
-	mutex_unlock(&dbs_mutex);
-
 	return count;
 }
 
@@ -284,16 +266,12 @@ static ssize_t store_up_threshold(struct
 	int ret;
 	ret = sscanf(buf, "%u", &input);
 
-	mutex_lock(&dbs_mutex);
 	if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
 			input < MIN_FREQUENCY_UP_THRESHOLD) {
-		mutex_unlock(&dbs_mutex);
 		return -EINVAL;
 	}
 
 	dbs_tuners_ins.up_threshold = input;
-	mutex_unlock(&dbs_mutex);
-
 	return count;
 }
 
@@ -312,9 +290,7 @@ static ssize_t store_ignore_nice_load(st
 	if (input > 1)
 		input = 1;
 
-	mutex_lock(&dbs_mutex);
 	if (input == dbs_tuners_ins.ignore_nice) { /* nothing to do */
-		mutex_unlock(&dbs_mutex);
 		return count;
 	}
 	dbs_tuners_ins.ignore_nice = input;
@@ -329,8 +305,6 @@ static ssize_t store_ignore_nice_load(st
 			dbs_info->prev_cpu_nice = kstat_cpu(j).cpustat.nice;
 
 	}
-	mutex_unlock(&dbs_mutex);
-
 	return count;
 }
 
@@ -347,11 +321,8 @@ static ssize_t store_powersave_bias(stru
 	if (input > 1000)
 		input = 1000;
 
-	mutex_lock(&dbs_mutex);
 	dbs_tuners_ins.powersave_bias = input;
 	ondemand_powersave_bias_init();
-	mutex_unlock(&dbs_mutex);
-
 	return count;
 }
 
@@ -580,16 +551,6 @@ static int cpufreq_governor_dbs(struct c
 		if (this_dbs_info->enable) /* Already enabled */
 			break;
 
-		mutex_lock(&dbs_mutex);
-		dbs_enable++;
-
-		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
-		if (rc) {
-			dbs_enable--;
-			mutex_unlock(&dbs_mutex);
-			return rc;
-		}
-
 		for_each_cpu(j, policy->cpus) {
 			struct cpu_dbs_info_s *j_dbs_info;
 			j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -604,10 +565,10 @@ static int cpufreq_governor_dbs(struct c
 		}
 		this_dbs_info->cpu = cpu;
 		/*
-		 * Start the timerschedule work, when this governor
-		 * is used for first time
+		 * Initialize general ondemand tunables only ones, not for
+		 * each core
 		 */
-		if (dbs_enable == 1) {
+		if (!dbs_enable) {
 			unsigned int latency;
 			/* policy latency is in nS. Convert it to uS first */
 			latency = policy->cpuinfo.transition_latency / 1000;
@@ -619,30 +580,31 @@ static int cpufreq_governor_dbs(struct c
 				    MIN_STAT_SAMPLING_RATE);
 
 			dbs_tuners_ins.sampling_rate = def_sampling_rate;
+		}			
+		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
+		if (rc) {
+			this_dbs_info->enable = 0;
+			return rc;
 		}
 		dbs_timer_init(this_dbs_info);
-
-		mutex_unlock(&dbs_mutex);
+		dbs_enable++;
 		break;
 
 	case CPUFREQ_GOV_STOP:
-		mutex_lock(&dbs_mutex);
-		dbs_timer_exit(this_dbs_info);
-		sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+		if (this_dbs_info->enable) {
+			dbs_timer_exit(this_dbs_info);
+			sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+		}
 		dbs_enable--;
-		mutex_unlock(&dbs_mutex);
-
 		break;
 
 	case CPUFREQ_GOV_LIMITS:
-		mutex_lock(&dbs_mutex);
 		if (policy->max < this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(this_dbs_info->cur_policy,
 				policy->max, CPUFREQ_RELATION_H);
 		else if (policy->min > this_dbs_info->cur_policy->cur)
 			__cpufreq_driver_target(this_dbs_info->cur_policy,
 				policy->min, CPUFREQ_RELATION_L);
-		mutex_unlock(&dbs_mutex);
 		break;
 	}
 	return 0;
\0

Re: [Bug #13475] suspend/hibernate lockdep warning

[Pallipadi, Venkatesh]

On Wed, 2009-06-17 at 08:29 -0700, Thomas Renninger wrote:
> On Wednesday 17 June 2009 02:39:25 Pallipadi, Venkatesh wrote:
> > On Thu, Jun 11, 2009 at 08:23:29AM -0700, Mathieu Desnoyers wrote:
> > > * Simon Holm Thøgersen (odie-t5LvXY1cjzpaa/9Udqfwiw@public.gmane.org) wrote:
> > > > man, 08 06 2009 kl. 10:32 -0400, skrev Dave Jones:
> > > > > On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
> > > > >
> > > > >  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
> > > > >  > > > >> Subject         : suspend/hibernate lockdep warning
> > > > >  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
> > > > >  > > >
> > > > >  > > > I suspect the following commit, after revert this patch I test 5 times
> > > > >  > > > without lockdep warnings.
> > > > >  > > >
> > > > >  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
> > > > >  > > > Author: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
> > > > >  > > > Date:   Sun May 17 10:30:45 2009 -0400
> > > > >  > > >
> > > > >  > > >  [CPUFREQ] fix timer teardown in ondemand governor
> > > > >  > >
> > > > >  > > The patch is probably not at fault here. I suspect it's some latent bug
> > > > >  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
> > > > >  > > any case, Mathieu, can you take a look at this please?
> > > > >  >
> > > > >  > Yes, it's been looked at and discussed on the cpufreq ML. The short
> > > > >  > answer is that they plan to re-engineer cpufreq and remove the policy
> > > > >  > rwlock taken around almost every operations at the cpufreq level.
> > > > >  >
> > > > >  > The short-term solution, which is recognised as ugly, would be do to the
> > > > >  > following before doing the cancel_delayed_work_sync() :
> > > > >  >
> > > > >  > unlock policy rwlock write lock
> > > > >  >
> > > > >  > lock policy rwlock write lock
> > > > >  >
> > > > >  > It basically works because this rwlock is unneeded for teardown, hence
> > > > >  > the future re-work planned.
> > > > >  >
> > > > >  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
> > > > >  > of Ph.D. thesis due for the beginning of July.
> > > > >
> > > > > I'm kinda scared to touch this code at all for .30 due to the number of
> > > > > unexpected gotchas we seem to run into every time we touch something
> > > > > locking related.  So I'm inclined to just live with the lockdep warning
> > > > > for .30, and see how the real fixes look for .31, and push them back
> > > > > as -stable updates if they work out.
> > > >
> > > > Unfortunately I don't think it is just theoretical, I've actually hit
> > > > the following (that haven't got anything to do with suspend/hibernate)
> > > >
> > > > INFO: task cpufreqd:4676 blocked for more than 120 seconds.
> > > >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > > >  cpufreqd      D eee2ac60     0  4676      1
> > > >   ee01bd68 00000086 eee2aad0 eee2ac60 00000533 eee2aad0 eee2ac60 0002b16f
> > > >   00000000 eee2ac60 7fffffff 7fffffff eee2ac60 7fffffff 7fffffff 00000000
> > > >   ee01bd70 c03117ee ee01bdbc c0311c0c eee2aad0 eecf6900 eee2aad0 eecf6900
> > > >  Call Trace:
> > > >   [<c03117ee>] schedule+0x12/0x24
> > > >   [<c0311c0c>] schedule_timeout+0x17/0x170
> > > >   [<c011a4f7>] ? __wake_up+0x2b/0x51
> > > >   [<c0311afd>] wait_for_common+0xc4/0x135
> > > >   [<c011a694>] ? default_wake_function+0x0/0xd
> > > >   [<c0311be0>] wait_for_completion+0x12/0x14
> > > >   [<c012bc6a>] __cancel_work_timer+0xfe/0x129
> > > >   [<c012b635>] ? wq_barrier_func+0x0/0xd
> > > >   [<c012bca0>] cancel_delayed_work_sync+0xb/0xd
> > > >   [<f20948f9>] cpufreq_governor_dbs+0x22e/0x291 [cpufreq_ondemand]
> > > >   [<c02af857>] __cpufreq_governor+0x65/0x9d
> > > >   [<c02af960>] __cpufreq_set_policy+0xd1/0x11f
> > > >   [<c02b02ae>] store_scaling_governor+0x18a/0x1b2
> > > >   [<c02b09a5>] ? handle_update+0x0/0xd
> > > >   [<c02b0124>] ? store_scaling_governor+0x0/0x1b2
> > > >   [<c02b08c9>] store+0x48/0x61
> > > >   [<c01acbf4>] sysfs_write_file+0xb4/0xdf
> > > >   [<c01acb40>] ? sysfs_write_file+0x0/0xdf
> > > >   [<c0175535>] vfs_write+0x8a/0x104
> > > >   [<c0175648>] sys_write+0x3b/0x60
> > > >   [<c0103110>] sysenter_do_call+0x12/0x2c
> > > >  INFO: task kondemand/0:4956 blocked for more than 120 seconds.
> > > >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > > >  kondemand/0   D 00000533     0  4956      2
> > > >   ee1d9efc 00000046 c011815f 00000533 071148de ee1e0080 ee1e0210 00000000
> > > >   c03ff478 9189e633 00000082 c03ff478 ee1e0210 c04159f4 c04159f0 00000000
> > > >   ee1d9f04 c03117ee ee1d9f28 c0313104 ee1d9f30 c04159f4 ee1e0080 c01183be
> > > >  Call Trace:
> > > >   [<c011815f>] ? update_curr+0x6c/0x14b
> > > >   [<c03117ee>] schedule+0x12/0x24
> > > >   [<c0313104>] rwsem_down_failed_common+0x150/0x16e
> > > >   [<c01183be>] ? dequeue_task_fair+0x51/0x56
> > > >   [<c031313d>] rwsem_down_write_failed+0x1b/0x23
> > > >   [<c031317e>] call_rwsem_down_write_failed+0x6/0x8
> > > >   [<c03125dd>] ? down_write+0x14/0x16
> > > >   [<c02b0460>] lock_policy_rwsem_write+0x1d/0x33
> > > >   [<f20944aa>] do_dbs_timer+0x45/0x266 [cpufreq_ondemand]
> > > >   [<c012b8f7>] worker_thread+0x165/0x212
> > > >   [<f2094465>] ? do_dbs_timer+0x0/0x266 [cpufreq_ondemand]
> > > >   [<c012e639>] ? autoremove_wake_function+0x0/0x33
> > > >   [<c012b792>] ? worker_thread+0x0/0x212
> > > >   [<c012e278>] kthread+0x42/0x67
> > > >   [<c012e236>] ? kthread+0x0/0x67
> > > >   [<c01038eb>] kernel_thread_helper+0x7/0x10
> > > >
> > > > I've only seen it once in 5 boots and CONFIG_PROVELOCKING does not give any
> > > > warnings about this, though it does yell when switching governor as reported
> > > > by others in bug #13493.
> > > >
> > > > Let's hope Mathieu nails it, though I know he's busy with his thesis.
> > > >
> > >
> > > Thanks for the lockdep reports,
> > >
> > > I'm currently looking into it, and it's not pretty. Basically we have :
> > >
> > > A
> > >   B
> > > (means B nested in A)
> > >
> > > work
> > >   read rwlock policy
> > >
> > > dbs_mutex
> > >   work
> > >     read rwlock policy
> > >
> > > write rwlock policy
> > >   dbs_mutex
> > >
> > > So the added dbs_mutex <- work <- rwlock policy dependency (for proper
> > > teardown) is firing the reverse dependency between policy rwlock and
> > > dbs_mutex.
> > >
> > > The real way to fix this is to do not take the rwlock policy around
> > > non-policy-related actions, like governor START/STOP doing worker
> > > creation/teardown.
> > >
> > > One simple short-term solution would be to take a mutex outside of the
> > > policy rwlock write lock in cpufreq.c. This mutex would be the
> > > equivalent of dbs_mutex "lifted" outside of the rwlock write lock. For
> > > teardown, we only need to hold this mutex, not the rwlock write lock.
> > > Then we can remove the dbs_mutex from the governors.
> > >
> > > But looking at cpufreq.c's cpufreq_add_dev() is very much like kicking a
> > > wasp nest: a lot of error paths are not handled properly, and I fear
> > > someone will have to go through the code, fix the currently incorrect
> > > code paths, and then add the lifted mutex.
> > >
> > > I currently have no time for implementation due to my thesis, but I'll
> > > be happy to review a patch.
> > >
> >
> > How about below patch on top of Mathieu's patch here
> > http://marc.info/?l=linux-kernel&m=124448150529838&w=2
> >
> > [PATCH] cpufreq: Eliminate lockdep issue with dbs_mutex and policy_rwsem
> >
> > This removes the unneeded dependency of
> > write rwlock policy
> >   dbs_mutex
> >
> > dbs_mutex does not have anything to do with timer_init and timer_exit. It
> > is just to protect dbs tunables in sysfs cpufreq/ondemand
> Why is sysfs tunables protection needed at all?
> 
> The ondemand locking very much looks like taken over from the userspace
> governor. There you need the lock because a write to set_speed directly
> calls ->target.
> 

I was looking at the same thing before sending the patch yesterday. I
don't think the dbs_lock is similar to userspace lock. Infact, I don't
think we need the lock in userspace case, as we will already be holding
policy rwsem in cpufreq, before calling setspeed. But thats a different
story.
 
> What is urgently missing is a description for what the locks are
> really used, not only in which case they deadlock.
> 
> From your comment above:
> > dbs_mutex does not have anything to do with timer_init and timer_exit.
> But this is what it seems to do?
> If it's not needed to protect calling timer_init while in timer_exit
> (or the other way around) and sysfs_create_group while
> in sysfs_remove_group I think the mutex can be deleted.
> What do you think about this patch (compile tested only and not
> for .30)?
> 
> Is someone aware of any test scenarios I could run to try without
> the mutex and run into trouble?
> Do I totally miss something here or does this make sense?
> 

The reason I left dbs_mutex as is and just removed the init/exit timer
outside the lock was because of the non typical sysfs usage in ondemand.
We have dbs_attr_group that gets added under each cpu's cpufreq
directory, but they are controlling a single set of ondemand variables.
This mutex is just serializing the changes to those variables. I could't
think of any functionality issues of not having the lock as such.

Thanks,
Venki

Re: [Bug #13475] suspend/hibernate lockdep warning

[Dave Young]

On Wed, Jun 17, 2009 at 8:39 AM, Pallipadi,
Venkatesh<venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> wrote:
> On Thu, Jun 11, 2009 at 08:23:29AM -0700, Mathieu Desnoyers wrote:
>> * Simon Holm Thøgersen (odie-t5LvXY1cjzpaa/9Udqfwiw@public.gmane.org) wrote:
>> > man, 08 06 2009 kl. 10:32 -0400, skrev Dave Jones:
>> > > On Mon, Jun 08, 2009 at 08:48:45AM -0400, Mathieu Desnoyers wrote:
>> > >
>> > >  > > > >> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13475
>> > >  > > > >> Subject         : suspend/hibernate lockdep warning
>> > >  > > > >> References      : http://marc.info/?l=linux-kernel&m=124393723321241&w=4
>> > >  > > >
>> > >  > > > I suspect the following commit, after revert this patch I test 5 times
>> > >  > > > without lockdep warnings.
>> > >  > > >
>> > >  > > > commit b14893a62c73af0eca414cfed505b8c09efc613c
>> > >  > > > Author: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
>> > >  > > > Date:   Sun May 17 10:30:45 2009 -0400
>> > >  > > >
>> > >  > > >    [CPUFREQ] fix timer teardown in ondemand governor
>> > >  > >
>> > >  > > The patch is probably not at fault here. I suspect it's some latent bug
>> > >  > > that simply got exposed by the change to cancel_delayed_work_sync(). In
>> > >  > > any case, Mathieu, can you take a look at this please?
>> > >  >
>> > >  > Yes, it's been looked at and discussed on the cpufreq ML. The short
>> > >  > answer is that they plan to re-engineer cpufreq and remove the policy
>> > >  > rwlock taken around almost every operations at the cpufreq level.
>> > >  >
>> > >  > The short-term solution, which is recognised as ugly, would be do to the
>> > >  > following before doing the cancel_delayed_work_sync() :
>> > >  >
>> > >  > unlock policy rwlock write lock
>> > >  >
>> > >  > lock policy rwlock write lock
>> > >  >
>> > >  > It basically works because this rwlock is unneeded for teardown, hence
>> > >  > the future re-work planned.
>> > >  >
>> > >  > I'm sorry I cannot prepare a patch current... I've got quite a few pages
>> > >  > of Ph.D. thesis due for the beginning of July.
>> > >
>> > > I'm kinda scared to touch this code at all for .30 due to the number of
>> > > unexpected gotchas we seem to run into every time we touch something
>> > > locking related.  So I'm inclined to just live with the lockdep warning
>> > > for .30, and see how the real fixes look for .31, and push them back
>> > > as -stable updates if they work out.
>> >
>> > Unfortunately I don't think it is just theoretical, I've actually hit
>> > the following (that haven't got anything to do with suspend/hibernate)
>> >
>> > INFO: task cpufreqd:4676 blocked for more than 120 seconds.
>> >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> >  cpufreqd      D eee2ac60     0  4676      1
>> >   ee01bd68 00000086 eee2aad0 eee2ac60 00000533 eee2aad0 eee2ac60 0002b16f
>> >   00000000 eee2ac60 7fffffff 7fffffff eee2ac60 7fffffff 7fffffff 00000000
>> >   ee01bd70 c03117ee ee01bdbc c0311c0c eee2aad0 eecf6900 eee2aad0 eecf6900
>> >  Call Trace:
>> >   [<c03117ee>] schedule+0x12/0x24
>> >   [<c0311c0c>] schedule_timeout+0x17/0x170
>> >   [<c011a4f7>] ? __wake_up+0x2b/0x51
>> >   [<c0311afd>] wait_for_common+0xc4/0x135
>> >   [<c011a694>] ? default_wake_function+0x0/0xd
>> >   [<c0311be0>] wait_for_completion+0x12/0x14
>> >   [<c012bc6a>] __cancel_work_timer+0xfe/0x129
>> >   [<c012b635>] ? wq_barrier_func+0x0/0xd
>> >   [<c012bca0>] cancel_delayed_work_sync+0xb/0xd
>> >   [<f20948f9>] cpufreq_governor_dbs+0x22e/0x291 [cpufreq_ondemand]
>> >   [<c02af857>] __cpufreq_governor+0x65/0x9d
>> >   [<c02af960>] __cpufreq_set_policy+0xd1/0x11f
>> >   [<c02b02ae>] store_scaling_governor+0x18a/0x1b2
>> >   [<c02b09a5>] ? handle_update+0x0/0xd
>> >   [<c02b0124>] ? store_scaling_governor+0x0/0x1b2
>> >   [<c02b08c9>] store+0x48/0x61
>> >   [<c01acbf4>] sysfs_write_file+0xb4/0xdf
>> >   [<c01acb40>] ? sysfs_write_file+0x0/0xdf
>> >   [<c0175535>] vfs_write+0x8a/0x104
>> >   [<c0175648>] sys_write+0x3b/0x60
>> >   [<c0103110>] sysenter_do_call+0x12/0x2c
>> >  INFO: task kondemand/0:4956 blocked for more than 120 seconds.
>> >  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> >  kondemand/0   D 00000533     0  4956      2
>> >   ee1d9efc 00000046 c011815f 00000533 071148de ee1e0080 ee1e0210 00000000
>> >   c03ff478 9189e633 00000082 c03ff478 ee1e0210 c04159f4 c04159f0 00000000
>> >   ee1d9f04 c03117ee ee1d9f28 c0313104 ee1d9f30 c04159f4 ee1e0080 c01183be
>> >  Call Trace:
>> >   [<c011815f>] ? update_curr+0x6c/0x14b
>> >   [<c03117ee>] schedule+0x12/0x24
>> >   [<c0313104>] rwsem_down_failed_common+0x150/0x16e
>> >   [<c01183be>] ? dequeue_task_fair+0x51/0x56
>> >   [<c031313d>] rwsem_down_write_failed+0x1b/0x23
>> >   [<c031317e>] call_rwsem_down_write_failed+0x6/0x8
>> >   [<c03125dd>] ? down_write+0x14/0x16
>> >   [<c02b0460>] lock_policy_rwsem_write+0x1d/0x33
>> >   [<f20944aa>] do_dbs_timer+0x45/0x266 [cpufreq_ondemand]
>> >   [<c012b8f7>] worker_thread+0x165/0x212
>> >   [<f2094465>] ? do_dbs_timer+0x0/0x266 [cpufreq_ondemand]
>> >   [<c012e639>] ? autoremove_wake_function+0x0/0x33
>> >   [<c012b792>] ? worker_thread+0x0/0x212
>> >   [<c012e278>] kthread+0x42/0x67
>> >   [<c012e236>] ? kthread+0x0/0x67
>> >   [<c01038eb>] kernel_thread_helper+0x7/0x10
>> >
>> > I've only seen it once in 5 boots and CONFIG_PROVELOCKING does not give any
>> > warnings about this, though it does yell when switching governor as reported
>> > by others in bug #13493.
>> >
>> > Let's hope Mathieu nails it, though I know he's busy with his thesis.
>> >
>>
>> Thanks for the lockdep reports,
>>
>> I'm currently looking into it, and it's not pretty. Basically we have :
>>
>> A
>>   B
>> (means B nested in A)
>>
>> work
>>   read rwlock policy
>>
>> dbs_mutex
>>   work
>>     read rwlock policy
>>
>> write rwlock policy
>>   dbs_mutex
>>
>> So the added dbs_mutex <- work <- rwlock policy dependency (for proper
>> teardown) is firing the reverse dependency between policy rwlock and
>> dbs_mutex.
>>
>> The real way to fix this is to do not take the rwlock policy around
>> non-policy-related actions, like governor START/STOP doing worker
>> creation/teardown.
>>
>> One simple short-term solution would be to take a mutex outside of the
>> policy rwlock write lock in cpufreq.c. This mutex would be the
>> equivalent of dbs_mutex "lifted" outside of the rwlock write lock. For
>> teardown, we only need to hold this mutex, not the rwlock write lock.
>> Then we can remove the dbs_mutex from the governors.
>>
>> But looking at cpufreq.c's cpufreq_add_dev() is very much like kicking a
>> wasp nest: a lot of error paths are not handled properly, and I fear
>> someone will have to go through the code, fix the currently incorrect
>> code paths, and then add the lifted mutex.
>>
>> I currently have no time for implementation due to my thesis, but I'll
>> be happy to review a patch.
>>
>
> How about below patch on top of Mathieu's patch here
> http://marc.info/?l=linux-kernel&m=124448150529838&w=2
>
> [PATCH] cpufreq: Eliminate lockdep issue with dbs_mutex and policy_rwsem
>
> This removes the unneeded dependency of
> write rwlock policy
>  dbs_mutex
>
> dbs_mutex does not have anything to do with timer_init and timer_exit. It
> is just to protect dbs tunables in sysfs cpufreq/ondemand and is not
> needed to be held during timer init, exit as well as during governor limit
> changes.
>
> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/cpufreq/cpufreq_ondemand.c |    8 +++-----
>  1 files changed, 3 insertions(+), 5 deletions(-)

latest linux-2.6 git + this patch, hibernate test result:

[  221.956815]
[  221.956817] =======================================================
[  221.957017] [ INFO: possible circular locking dependency detected ]
[  221.957173] 2.6.30-06692-g3fe0344-dirty #77
[  221.957276] -------------------------------------------------------
[  221.957431] 94cpufreq/1914 is trying to acquire lock:
[  221.957561]  (&(&dbs_info->work)->work){+.+...}, at: [<c1037f46>]
__cancel_work_timer+0x8c/0x18c
[  221.958034]
[  221.958036] but task is already holding lock:
[  221.958336]  (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at:
[<c1284528>] lock_policy_rwsem_write+0x33/0x5b
[  221.958850]
[  221.958852] which lock already depends on the new lock.
[  221.958855]
[  221.959258]
[  221.959260] the existing dependency chain (in reverse order) is:
[  221.959625]
[  221.959627] -> #1 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}:
[  221.959994]        [<c1049d0f>] __lock_acquire+0x91e/0xaa9
[  221.959994]        [<c1049f35>] lock_acquire+0x9b/0xbe
[  221.959994]        [<c1335fed>] down_write+0x2f/0x4b
[  221.959994]        [<c1284528>] lock_policy_rwsem_write+0x33/0x5b
[  221.959994]        [<c1286097>] do_dbs_timer+0x45/0x23b
[  221.959994]        [<c103851e>] worker_thread+0x170/0x23c
[  221.959994]        [<c103ad8b>] kthread+0x45/0x6e
[  221.959994]        [<c1003dc7>] kernel_thread_helper+0x7/0x10
[  221.959994]        [<ffffffff>] 0xffffffff
[  221.959994]
[  221.959994] -> #0 (&(&dbs_info->work)->work){+.+...}:
[  221.959994]        [<c1049c1f>] __lock_acquire+0x82e/0xaa9
[  221.959994]        [<c1049f35>] lock_acquire+0x9b/0xbe
[  221.959994]        [<c1037f71>] __cancel_work_timer+0xb7/0x18c
[  221.959994]        [<c1038051>] cancel_delayed_work_sync+0xb/0xd
[  221.959994]        [<c1286484>] cpufreq_governor_dbs+0x1f7/0x263
[  221.959994]        [<c1283b13>] __cpufreq_governor+0x66/0x9d
[  221.959994]        [<c1283c89>] __cpufreq_set_policy+0x13f/0x1c3
[  221.959994]        [<c1284151>] store_scaling_governor+0x159/0x188
[  221.959994]        [<c1284d12>] store+0x42/0x5b
[  221.959994]        [<c10d783d>] sysfs_write_file+0xb8/0xe3
[  221.959994]        [<c109937e>] vfs_write+0x82/0xdc
[  221.959994]        [<c109946d>] sys_write+0x3b/0x5d
[  221.959994]        [<c100331d>] syscall_call+0x7/0xb
[  221.959994]        [<ffffffff>] 0xffffffff
[  221.959994]
[  221.959994] other info that might help us debug this:
[  221.959994]
[  221.959994] 2 locks held by 94cpufreq/1914:
[  221.959994]  #0:  (&buffer->mutex){+.+.+.}, at: [<c10d77aa>]
sysfs_write_file+0x25/0xe3
[  221.959994]  #1:  (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at:
[<c1284528>] lock_policy_rwsem_write+0x33/0x5b
[  221.959994]
[  221.959994] stack backtrace:
[  221.959994] Pid: 1914, comm: 94cpufreq Not tainted
2.6.30-06692-g3fe0344-dirty #77
[  221.959994] Call Trace:
[  221.959994]  [<c1048895>] print_circular_bug_tail+0x5d/0x68
[  221.959994]  [<c1049c1f>] __lock_acquire+0x82e/0xaa9
[  221.959994]  [<c1048415>] ? mark_lock+0x1e/0x1c7
[  221.959994]  [<c1049f35>] lock_acquire+0x9b/0xbe
[  221.959994]  [<c1037f46>] ? __cancel_work_timer+0x8c/0x18c
[  221.959994]  [<c1037f71>] __cancel_work_timer+0xb7/0x18c
[  221.959994]  [<c1037f46>] ? __cancel_work_timer+0x8c/0x18c
[  221.959994]  [<c1048601>] ? mark_held_locks+0x43/0x5b
[  221.959994]  [<c1335972>] ? __mutex_unlock_slowpath+0xf1/0x101
[  221.959994]  [<c104876a>] ? trace_hardirqs_on+0xb/0xd
[  221.959994]  [<c1038051>] cancel_delayed_work_sync+0xb/0xd
[  221.959994]  [<c1286484>] cpufreq_governor_dbs+0x1f7/0x263
[  221.959994]  [<c103e02b>] ? up_read+0x16/0x29
[  221.959994]  [<c1283b13>] __cpufreq_governor+0x66/0x9d
[  221.959994]  [<c1283c89>] __cpufreq_set_policy+0x13f/0x1c3
[  221.959994]  [<c1283ff8>] ? store_scaling_governor+0x0/0x188
[  221.959994]  [<c1284151>] store_scaling_governor+0x159/0x188
[  221.959994]  [<c1284659>] ? handle_update+0x0/0x28
[  221.959994]  [<c1284528>] ? lock_policy_rwsem_write+0x33/0x5b
[  221.959994]  [<c1283ff8>] ? store_scaling_governor+0x0/0x188
[  221.959994]  [<c1284d12>] store+0x42/0x5b
[  221.959994]  [<c10d783d>] sysfs_write_file+0xb8/0xe3
[  221.959994]  [<c109937e>] vfs_write+0x82/0xdc
[  221.959994]  [<c10d7785>] ? sysfs_write_file+0x0/0xe3
[  221.959994]  [<c109946d>] sys_write+0x3b/0x5d
[  221.959994]  [<c100331d>] syscall_call+0x7/0xb
[  222.336101] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[  222.340205] PM: Basic memory bitmaps created
[  222.344226] PM: Syncing filesystems ... done.
>
> diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
> index e741c33..1c94ff5 100644
> --- a/drivers/cpufreq/cpufreq_ondemand.c
> +++ b/drivers/cpufreq/cpufreq_ondemand.c
> @@ -352,8 +352,8 @@ static ssize_t store_powersave_bias(struct cpufreq_policy *unused,
>
>        mutex_lock(&dbs_mutex);
>        dbs_tuners_ins.powersave_bias = input;
> -       ondemand_powersave_bias_init();
>        mutex_unlock(&dbs_mutex);
> +       ondemand_powersave_bias_init();
>
>        return count;
>  }
> @@ -626,14 +626,14 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
>
>                        dbs_tuners_ins.sampling_rate = def_sampling_rate;
>                }
> +               mutex_unlock(&dbs_mutex);
>                dbs_timer_init(this_dbs_info);
>
> -               mutex_unlock(&dbs_mutex);
>                break;
>
>        case CPUFREQ_GOV_STOP:
> -               mutex_lock(&dbs_mutex);
>                dbs_timer_exit(this_dbs_info);
> +               mutex_lock(&dbs_mutex);
>                sysfs_remove_group(&policy->kobj, &dbs_attr_group);
>                dbs_enable--;
>                mutex_unlock(&dbs_mutex);
> @@ -641,14 +641,12 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
>                break;
>
>        case CPUFREQ_GOV_LIMITS:
> -               mutex_lock(&dbs_mutex);
>                if (policy->max < this_dbs_info->cur_policy->cur)
>                        __cpufreq_driver_target(this_dbs_info->cur_policy,
>                                policy->max, CPUFREQ_RELATION_H);
>                else if (policy->min > this_dbs_info->cur_policy->cur)
>                        __cpufreq_driver_target(this_dbs_info->cur_policy,
>                                policy->min, CPUFREQ_RELATION_L);
> -               mutex_unlock(&dbs_mutex);
>                break;
>        }
>        return 0;
> --
> 1.6.0.6
>
>



-- 
Regards
dave

[Bug #13474] Oops whilst booting

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13474
Subject		: Oops whilst booting
Submitter	: Chris Clayton <chris2553-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Date		: 2009-06-06 18:59 (2 days old)
References	: http://marc.info/?l=linux-kernel&m=124431487924254&w=4

[Bug #13472] Oops with minicom and USB serial

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13472
Subject		: Oops with minicom and USB serial
Submitter	: Peter Chubb <peterc-M3ycANVxPotyL3EAZA59ERCuuivNXqWP@public.gmane.org>
Date		: 2009-06-05 1:37 (3 days old)
References	: http://marc.info/?l=linux-kernel&m=124416901026700&w=4
Handled-By	: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>

[Bug #13473] Bug while trying to launch a KVM guest

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13473
Subject		: Bug while trying to launch a KVM guest
Submitter	: Sachin Sant <sachinp-xthvdsQ13ZrQT0dZR+AlfA@public.gmane.org>
Date		: 2009-06-05 17:20 (3 days old)
References	: http://marc.info/?l=linux-kernel&m=124422173129047&w=4
Handled-By	: Mimi Zohar <zohar-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>

Re: [Bug #13473] Bug while trying to launch a KVM guest

[Sachin Sant]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13473
> Subject		: Bug while trying to launch a KVM guest
> Submitter	: Sachin Sant <sachinp-xthvdsQ13ZrQT0dZR+AlfA@public.gmane.org>
> Date		: 2009-06-05 17:20 (3 days old)
> References	: http://marc.info/?l=linux-kernel&m=124422173129047&w=4
> Handled-By	: Mimi Zohar <zohar-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
>   
This problem is fixed by the following patches.

f06dd16a03f6f7f72fab4db03be36e28c28c6fd6 : IMA: Handle dentry_open failures
1a62e958fa4aaeeb752311b4f5e16b2a86737b23 : IMA: open all files O_LARGEFILE

I can't really say this is a regression. I never had compiled a kernel with
CONFIG_IMA until 2.6.30-rc8. 


Thanks
-Sachin

-- 

---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------

Re: [Bug #13473] Bug while trying to launch a KVM guest

[Rafael J. Wysocki]

On Monday 08 June 2009, Sachin Sant wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.29.  Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13473
> > Subject		: Bug while trying to launch a KVM guest
> > Submitter	: Sachin Sant <sachinp-xthvdsQ13ZrQT0dZR+AlfA@public.gmane.org>
> > Date		: 2009-06-05 17:20 (3 days old)
> > References	: http://marc.info/?l=linux-kernel&m=124422173129047&w=4
> > Handled-By	: Mimi Zohar <zohar-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
> >   
> This problem is fixed by the following patches.
> 
> f06dd16a03f6f7f72fab4db03be36e28c28c6fd6 : IMA: Handle dentry_open failures
> 1a62e958fa4aaeeb752311b4f5e16b2a86737b23 : IMA: open all files O_LARGEFILE
> 
> I can't really say this is a regression. I never had compiled a kernel with
> CONFIG_IMA until 2.6.30-rc8. 

I see.  Perhaps I'll drop it from the list and mark it as resolved, then.

Best,
Rafael

2.6.31-rc7-git2: Reported regressions 2.6.29 -> 2.6.30

[Rafael J. Wysocki]

This message contains a list of some regressions introduced between 2.6.29 and
2.6.30, for which there are no fixes in the mainline I know of.  If any of them
have been fixed already, please let me know.

If you know of any other unresolved regressions introduced between 2.6.29
and 2.6.30, please let me know either and I'll add them to the list.
Also, please let me know if any of the entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-08-26      152       33          30
  2009-08-20      150       35          32
  2009-08-10      148       39          37
  2009-08-02      145       44          39
  2009-07-27      143       48          45
  2009-07-07      138       50          46
  2009-06-29      133       46          43
  2009-06-07      110       35          31
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=14049
Subject		: joydev: blacklist digitizers avoids recognition of Saitek X52 joysticks
Submitter	: Janos Laube <janos.dev@gmail.com>
Date		: 2009-08-24 14:18 (2 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d07a9cba6be5c0e947afc1014b5a62182a86f1f1


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13958
Subject		: ath5k Atheros AR5001 low signal
Submitter	: Marco Siviero <darker1985@slacky.it>
Date		: 2009-08-10 15:03 (16 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13949
Subject		: XFS regression
Submitter	: Justin Piszcz <jpiszcz@lucidpixels.com>
Date		: 2009-08-08 8:39 (18 days old)
References	: http://marc.info/?l=linux-kernel&m=124972079229959&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13898
Subject		: Intel 3945ABG - problems on 2.6.30.X
Submitter	: dienet <dienet@poczta.fm>
Date		: 2009-07-31 15:17 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=124905346729959&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13797
Subject		: iBook G4 doesn't suspend since 2ed8d2b3a8
Submitter	: Jörg Sommer <joerg@alea.gnuu.de>
Date		: 2009-07-18 20:18 (39 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13795
Subject		: abnormal boot and no suspend due to 'async' (fastboot)
Submitter	: Rafal Kaczynski <fscnoboot@wp.pl>
Date		: 2009-07-18 17:19 (39 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13780
Subject		: NULL pointer dereference loading powernowk8
Submitter	: Kurt Roeckx <kurt@roeckx.be>
Date		: 2009-07-15 18:00 (42 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13770
Subject		: System freeze on XFS filesystem recovery on an external disk
Submitter	: Jean-Luc Coulon <jean.luc.coulon@gmail.com>
Date		: 2009-07-14 10:31 (43 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13739
Subject		: 2.6.30 leaking keys on console switch
Submitter	: Andi Kleen <andi@firstfloor.org>
Date		: 2009-07-07 8:44 (50 days old)
References	: http://marc.info/?l=linux-kernel&m=124695628924382&w=4
Handled-By	: Jiri Kosina <jkosina@suse.cz>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13694
Subject		: i915 phantom TV
Submitter	: Maciek Józiewicz <mjoziew@gmail.com>
Date		: 2009-07-02 12:26 (55 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13682
Subject		: The webcam stopped working when upgrading from 2.6.29 to 2.6.30
Submitter	: Nathanael Schaeffer <nathanael.schaeffer@gmail.com>
Date		: 2009-06-30 13:34 (57 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13646
Subject		: warn_on tty_io.c, broken bluetooth
Submitter	: Pavel Machek <pavel@ucw.cz>
Date		: 2009-06-19 17:05 (68 days old)
References	: http://lkml.org/lkml/2009/6/19/187


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13583
Subject		: pdflush uses 5% CPU on otherwise idle system
Submitter	: Paul Martin <pm@debian.org>
Date		: 2009-06-19 13:33 (68 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13581
Subject		: ath9k doesn't work with newer kernels
Submitter	: Matteo <rootkit85@yahoo.it>
Date		: 2009-06-19 12:04 (68 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13564
Subject		: random general protection fault at boot time caused by khubd.
Submitter	: Pauli <suokkos@gmail.com>
Date		: 2009-06-18 12:44 (69 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13558
Subject		: Tracelog during resume
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-17 11:32 (70 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13514
Subject		: acer_wmi causes stack corruption
Submitter	: Rus <harbour@sfinx.od.ua>
Date		: 2009-06-12 08:13 (75 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13512
Subject		: D43 on 2.6.30 doesn't suspend anymore
Submitter	: Daniel Smolik <marvin@mydatex.cz>
Date		: 2009-06-11 20:12 (76 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13502
Subject		: GPE storm causes polling mode, which causes /proc/acpi/battery read to take 4 seconds - MacBookPro4,1
Submitter	:  <sveina@gmail.com>
Date		: 2009-06-10 20:04 (77 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg@gmail.com>
Date		: 2009-05-30 18:51 (88 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz@fias.uni-frankfurt.de>
Date		: 2009-05-28 7:59 (90 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard@free.fr>
Date		: 2009-05-28 18:43 (90 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira@gmail.com>
Date		: 2009-05-22 13:32 (96 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 - 2.6.31 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu@googlemail.com>
Date		: 2009-05-20 14:09 (98 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai@kernel.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick@ostenberg.de>
Date		: 2009-05-19 09:08 (99 days old)
Handled-By	: Rusty Russell <rusty@rustcorp.com.au>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (115 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime@gmx.de>
Date		: 2009-04-30 8:51 (118 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2009-05-14 09:34 (104 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Intel 440GX: Since kernel 2.6.30-rc1, computers hangs randomly but not with kernel <= 2.6.29.6
Submitter	: David Hill <hilld@binarystorm.net>
Date		: 2009-05-01 16:57 (117 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts@gmail.com>
Date		: 2009-04-21 21:35 (127 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=14059
Subject		: DomU crashes during xenfb initialization
Submitter	: Michal Schmidt <mschmidt@redhat.com>
Date		: 2009-08-21 10:40 (5 days old)
References	: http://marc.info/?l=linux-kernel&m=125085108431360&w=4
Handled-By	: Michal Schmidt <mschmidt@redhat.com>
Patch		: http://patchwork.kernel.org/patch/43107/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2009-05-26 15:24 (92 days old)
Handled-By	: Frans Pop <elendil@planet.nl>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (119 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
		  http://lkml.org/lkml/2009/7/26/213
Handled-By	: Johannes Berg <johannes@sipsolutions.net>
		  David Rientjes <rientjes@google.com>
Patch		: http://patchwork.kernel.org/patch/37655/


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.29 and 2.6.30, unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

_______________________________________________
linux-pm mailing list
linux-pm@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.29 and 2.6.30.

The following bug entry is on the current list of known regressions
introduced between 2.6.29 and 2.6.30.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (119 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
		  http://lkml.org/lkml/2009/7/26/213
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
		  David Rientjes <rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/37655/

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi Rafael,

On Wed, Aug 26, 2009 at 12:05 AM, Rafael J. Wysocki<rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.29 and 2.6.30.
>
> The following bug entry is on the current list of known regressions
> introduced between 2.6.29 and 2.6.30.  Please verify if it still should
> be listed and let me know (either way).
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13319
> Subject         : Page allocation failures with b43 and p54usb
> Submitter       : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date            : 2009-04-29 21:01 (119 days old)
> References      : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
>                  http://lkml.org/lkml/2009/6/7/136
>                  http://lkml.org/lkml/2009/7/26/213
> Handled-By      : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
>                  David Rientjes <rientjes-hpIqsD4AKldhl2p70BpVqQ@public.gmane.orgm>
> Patch           : http://patchwork.kernel.org/patch/37655/

FYI, the fix (a new slub debugging option) is queued for 2.6.32 and we
don't have plans to backport it to -stable because it depends on SLUB
out-of-memory diagnostic patches and the problem doesn't affect
production configs.

                                Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

On Wednesday 26 August 2009, Pekka Enberg wrote:
> Hi Rafael,
> 
> On Wed, Aug 26, 2009 at 12:05 AM, Rafael J. Wysocki<rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.29 and 2.6.30.
> >
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.29 and 2.6.30.  Please verify if it still should
> > be listed and let me know (either way).
> >
> >
> > Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=13319
> > Subject         : Page allocation failures with b43 and p54usb
> > Submitter       : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> > Date            : 2009-04-29 21:01 (119 days old)
> > References      : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> >                  http://lkml.org/lkml/2009/6/7/136
> >                  http://lkml.org/lkml/2009/7/26/213
> > Handled-By      : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
> >                  David Rientjes <rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
> > Patch           : http://patchwork.kernel.org/patch/37655/
> 
> FYI, the fix (a new slub debugging option) is queued for 2.6.32 and we
> don't have plans to backport it to -stable because it depends on SLUB
> out-of-memory diagnostic patches and the problem doesn't affect
> production configs.

Thanks for the info, I've closed the bug as "will fix later".

Rafael

2.6.31-rc6-git5: Reported regressions 2.6.29 -> 2.6.30

[Rafael J. Wysocki]

This message contains a list of some regressions introduced between 2.6.29 and
2.6.30, for which there are no fixes in the mainline I know of.  If any of them
have been fixed already, please let me know.

If you know of any other unresolved regressions introduced between 2.6.29
and 2.6.30, please let me know either and I'll add them to the list.
Also, please let me know if any of the entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-08-20      150       35          32
  2009-08-10      148       39          37
  2009-08-02      145       44          39
  2009-07-27      143       48          45
  2009-07-07      138       50          46
  2009-06-29      133       46          43
  2009-06-07      110       35          31
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13958
Subject		: ath5k Atheros AR5001 low signal
Submitter	: Marco Siviero <darker1985@slacky.it>
Date		: 2009-08-10 15:03 (10 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13949
Subject		: XFS regression
Submitter	: Justin Piszcz <jpiszcz@lucidpixels.com>
Date		: 2009-08-08 8:39 (12 days old)
References	: http://marc.info/?l=linux-kernel&m=124972079229959&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13933
Subject		: System lockup on dual Pentium-3 with kernel 2.6.30
Submitter	: Martin Rogge <marogge@onlinehome.de>
Date		: 2009-08-08 13:16 (12 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13898
Subject		: Intel 3945ABG - problems on 2.6.30.X
Submitter	: dienet <dienet@poczta.fm>
Date		: 2009-07-31 15:17 (20 days old)
References	: http://marc.info/?l=linux-kernel&m=124905346729959&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13797
Subject		: iBook G4 doesn't suspend since 2ed8d2b3a8
Submitter	: Jörg Sommer <joerg@alea.gnuu.de>
Date		: 2009-07-18 20:18 (33 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13795
Subject		: abnormal boot and no suspend due to 'async' (fastboot)
Submitter	: Rafal Kaczynski <fscnoboot@wp.pl>
Date		: 2009-07-18 17:19 (33 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13780
Subject		: NULL pointer dereference loading powernowk8
Submitter	: Kurt Roeckx <kurt@roeckx.be>
Date		: 2009-07-15 18:00 (36 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13770
Subject		: System freeze on XFS filesystem recovery on an external disk
Submitter	: Jean-Luc Coulon <jean.luc.coulon@gmail.com>
Date		: 2009-07-14 10:31 (37 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13739
Subject		: 2.6.30 leaking keys on console switch
Submitter	: Andi Kleen <andi@firstfloor.org>
Date		: 2009-07-07 8:44 (44 days old)
References	: http://marc.info/?l=linux-kernel&m=124695628924382&w=4
Handled-By	: Jiri Kosina <jkosina@suse.cz>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13694
Subject		: i915 phantom TV
Submitter	: Maciek Józiewicz <mjoziew@gmail.com>
Date		: 2009-07-02 12:26 (49 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13682
Subject		: The webcam stopped working when upgrading from 2.6.29 to 2.6.30
Submitter	: Nathanael Schaeffer <nathanael.schaeffer@gmail.com>
Date		: 2009-06-30 13:34 (51 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13646
Subject		: warn_on tty_io.c, broken bluetooth
Submitter	: Pavel Machek <pavel@ucw.cz>
Date		: 2009-06-19 17:05 (62 days old)
References	: http://lkml.org/lkml/2009/6/19/187


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13634
Subject		: [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-27 07:02 (54 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13583
Subject		: pdflush uses 5% CPU on otherwise idle system
Submitter	: Paul Martin <pm@debian.org>
Date		: 2009-06-19 13:33 (62 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13581
Subject		: ath9k doesn't work with newer kernels
Submitter	: Matteo <rootkit85@yahoo.it>
Date		: 2009-06-19 12:04 (62 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13564
Subject		: random general protection fault at boot time caused by khubd.
Submitter	: Pauli <suokkos@gmail.com>
Date		: 2009-06-18 12:44 (63 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13558
Subject		: Tracelog during resume
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-17 11:32 (64 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13514
Subject		: acer_wmi causes stack corruption
Submitter	: Rus <harbour@sfinx.od.ua>
Date		: 2009-06-12 08:13 (69 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13512
Subject		: D43 on 2.6.30 doesn't suspend anymore
Submitter	: Daniel Smolik <marvin@mydatex.cz>
Date		: 2009-06-11 20:12 (70 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13502
Subject		: GPE storm causes polling mode, which causes /proc/acpi/battery read to take 4 seconds - MacBookPro4,1
Submitter	:  <sveina@gmail.com>
Date		: 2009-06-10 20:04 (71 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg@gmail.com>
Date		: 2009-05-30 18:51 (82 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz@fias.uni-frankfurt.de>
Date		: 2009-05-28 7:59 (84 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard@free.fr>
Date		: 2009-05-28 18:43 (84 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2009-05-23 5:08 (89 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira@gmail.com>
Date		: 2009-05-22 13:32 (90 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 - 2.6.31 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu@googlemail.com>
Date		: 2009-05-20 14:09 (92 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai@kernel.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick@ostenberg.de>
Date		: 2009-05-19 09:08 (93 days old)
Handled-By	: Rusty Russell <rusty@rustcorp.com.au>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (109 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime@gmx.de>
Date		: 2009-04-30 8:51 (112 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2009-05-14 09:34 (98 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Intel 440GX: Since kernel 2.6.30-rc1, computers hangs randomly but not with kernel <= 2.6.29.6
Submitter	: David Hill <hilld@binarystorm.net>
Date		: 2009-05-01 16:57 (111 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts@gmail.com>
Date		: 2009-04-21 21:35 (121 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13620
Subject		: acpi_enforce_resources broken - conflicting i2c module loaded on some EeePCs
Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date		: 2009-06-25 08:31 (56 days old)
References	: <http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-June/002316.html>
Handled-By	: Lin Ming <ming.m.lin@intel.com>
Patch		: http://patchwork.kernel.org/patch/33626/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2009-05-26 15:24 (86 days old)
Handled-By	: Frans Pop <elendil@planet.nl>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (113 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
		  http://lkml.org/lkml/2009/7/26/213
Handled-By	: Johannes Berg <johannes@sipsolutions.net>
		  David Rientjes <rientjes@google.com>
Patch		: http://patchwork.kernel.org/patch/37655/


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.29 and 2.6.30, unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.29 and 2.6.30.

The following bug entry is on the current list of known regressions
introduced between 2.6.29 and 2.6.30.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (113 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
		  http://lkml.org/lkml/2009/7/26/213
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
		  David Rientjes <rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/37655/

2.6.31-rc5-git5: Reported regressions 2.6.29 -> 2.6.30

[Rafael J. Wysocki]

This message contains a list of some regressions introduced between 2.6.29 and
2.6.30, for which there are no fixes in the mainline I know of.  If any of them
have been fixed already, please let me know.

If you know of any other unresolved regressions introduced between 2.6.29
and 2.6.30, please let me know either and I'll add them to the list.
Also, please let me know if any of the entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-08-10      148       39          37
  2009-08-02      145       44          39
  2009-07-27      143       48          45
  2009-07-07      138       50          46
  2009-06-29      133       46          43
  2009-06-07      110       35          31
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13949
Subject		: XFS regression
Submitter	: Justin Piszcz <jpiszcz@lucidpixels.com>
Date		: 2009-08-08 8:39 (2 days old)
References	: http://marc.info/?l=linux-kernel&m=124972079229959&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13945
Subject		: Kernel freezes dual pentium-3 system
Submitter	: Martin Rogge <marogge@onlinehome.de>
Date		: 2009-08-03 16:25 (7 days old)
References	: http://marc.info/?l=linux-kernel&m=124931667320530&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13898
Subject		: Intel 3945ABG - problems on 2.6.30.X
Submitter	: dienet <dienet@poczta.fm>
Date		: 2009-07-31 15:17 (10 days old)
References	: http://marc.info/?l=linux-kernel&m=124905346729959&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13797
Subject		: iBook G4 doesn't suspend since 2ed8d2b3a8
Submitter	: Jörg Sommer <joerg@alea.gnuu.de>
Date		: 2009-07-18 20:18 (23 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13795
Subject		: abnormal boot and no suspend due to 'async' (fastboot)
Submitter	: Rafal Kaczynski <fscnoboot@wp.pl>
Date		: 2009-07-18 17:19 (23 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13780
Subject		: NULL pointer dereference loading powernowk8
Submitter	: Kurt Roeckx <kurt@roeckx.be>
Date		: 2009-07-15 18:00 (26 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13770
Subject		: System freeze on XFS filesystem recovery on an external disk
Submitter	: Jean-Luc Coulon <jean.luc.coulon@gmail.com>
Date		: 2009-07-14 10:31 (27 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13739
Subject		: 2.6.30 leaking keys on console switch
Submitter	: Andi Kleen <andi@firstfloor.org>
Date		: 2009-07-07 8:44 (34 days old)
References	: http://marc.info/?l=linux-kernel&m=124695628924382&w=4
Handled-By	: Jiri Kosina <jkosina@suse.cz>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13694
Subject		: i915 phantom TV
Submitter	: Maciek Józiewicz <mjoziew@gmail.com>
Date		: 2009-07-02 12:26 (39 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13682
Subject		: The webcam stopped working when upgrading from 2.6.29 to 2.6.30
Submitter	: Nathanael Schaeffer <nathanael.schaeffer@gmail.com>
Date		: 2009-06-30 13:34 (41 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13660
Subject		: Crashes during boot on 2.6.30 / 2.6.31-rc, random programs
Submitter	: Joao Correia <joaomiguelcorreia@gmail.com>
Date		: 2009-06-27 16:07 (44 days old)
References	: http://lkml.org/lkml/2009/6/27/95


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13646
Subject		: warn_on tty_io.c, broken bluetooth
Submitter	: Pavel Machek <pavel@ucw.cz>
Date		: 2009-06-19 17:05 (52 days old)
References	: http://lkml.org/lkml/2009/6/19/187


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13638
Subject		: rt2870 driver is broken for (some) cards
Submitter	: jakob gruber <jakob.gruber@kabelnet.at>
Date		: 2009-06-27 17:33 (44 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13634
Subject		: [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-27 07:02 (44 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13621
Subject		: xfs hangs with assertion failed
Submitter	: Johannes Engel <jcnengel@googlemail.com>
Date		: 2009-06-25 10:07 (46 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13620
Subject		: acpi_enforce_resources broken - conflicting i2c module loaded on some EeePCs
Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date		: 2009-06-25 08:31 (46 days old)
References	: <http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-June/002316.html>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13583
Subject		: pdflush uses 5% CPU on otherwise idle system
Submitter	: Paul Martin <pm@debian.org>
Date		: 2009-06-19 13:33 (52 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13581
Subject		: ath9k doesn't work with newer kernels
Submitter	: Matteo <rootkit85@yahoo.it>
Date		: 2009-06-19 12:04 (52 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13564
Subject		: random general protection fault at boot time caused by khubd.
Submitter	: Pauli <suokkos@gmail.com>
Date		: 2009-06-18 12:44 (53 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13558
Subject		: Tracelog during resume
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-17 11:32 (54 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13514
Subject		: acer_wmi causes stack corruption
Submitter	: Rus <harbour@sfinx.od.ua>
Date		: 2009-06-12 08:13 (59 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13512
Subject		: D43 on 2.6.30 doesn't suspend anymore
Submitter	: Daniel Smolik <marvin@mydatex.cz>
Date		: 2009-06-11 20:12 (60 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13502
Subject		: GPE storm causes polling mode, which causes /proc/acpi/battery read to take 4 seconds - MacBookPro4,1
Submitter	:  <sveina@gmail.com>
Date		: 2009-06-10 20:04 (61 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg@gmail.com>
Date		: 2009-05-30 18:51 (72 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz@fias.uni-frankfurt.de>
Date		: 2009-05-28 7:59 (74 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard@free.fr>
Date		: 2009-05-28 18:43 (74 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel@t-online.de>
Date		: 2009-05-23 8:52 (79 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4
		  http://lkml.org/lkml/2009/5/29/389


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2009-05-23 5:08 (79 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira@gmail.com>
Date		: 2009-05-22 13:32 (80 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu@googlemail.com>
Date		: 2009-05-20 14:09 (82 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai@kernel.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick@ostenberg.de>
Date		: 2009-05-19 09:08 (83 days old)
Handled-By	: Rusty Russell <rusty@rustcorp.com.au>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (99 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime@gmx.de>
Date		: 2009-04-30 8:51 (102 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2009-05-14 09:34 (88 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Intel 440GX: Since kernel 2.6.30-rc1, computers hangs randomly but not with kernel <= 2.6.29.6
Submitter	: David Hill <hilld@binarystorm.net>
Date		: 2009-05-01 16:57 (101 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts@gmail.com>
Date		: 2009-04-21 21:35 (111 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista@gmail.com>
Date		: 2009-04-11 14:56 (121 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang@intel.com>
		  Alexey Starikovskiy <astarikovskiy@suse.de>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2009-05-26 15:24 (76 days old)
Handled-By	: Frans Pop <elendil@planet.nl>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (103 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
		  http://lkml.org/lkml/2009/7/26/213
Handled-By	: Johannes Berg <johannes@sipsolutions.net>
		  David Rientjes <rientjes@google.com>
Patch		: http://patchwork.kernel.org/patch/37655/


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.29 and 2.6.30, unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.29 and 2.6.30.

The following bug entry is on the current list of known regressions
introduced between 2.6.29 and 2.6.30.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (103 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
		  http://lkml.org/lkml/2009/7/26/213
Handled-By	: Johannes Berg <johannes@sipsolutions.net>
		  David Rientjes <rientjes@google.com>
Patch		: http://patchwork.kernel.org/patch/37655/

2.6.31-rc5: Reported regressions 2.6.29 -> 2.6.30

[Rafael J. Wysocki]

This message contains a list of some regressions introduced between 2.6.29 and
2.6.30, for which there are no fixes in the mainline I know of.  If any of them
have been fixed already, please let me know.

If you know of any other unresolved regressions introduced between 2.6.29
and 2.6.30, please let me know either and I'll add them to the list.
Also, please let me know if any of the entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-08-02      145       44          39
  2009-07-27      143       48          45
  2009-07-07      138       50          46
  2009-06-29      133       46          43
  2009-06-07      110       35          31
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13898
Subject		: Intel 3945ABG - problems on 2.6.30.X
Submitter	: dienet <dienet@poczta.fm>
Date		: 2009-07-31 15:17 (3 days old)
References	: http://marc.info/?l=linux-kernel&m=124905346729959&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13886
Subject		: Suspend to disk no longer works in 2.6.30.2 with an EIDE drive
Submitter	:  <akwatts@ymail.com>
Date		: 2009-08-01 10:12 (2 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13865
Subject		: Can only resume with HP_WMI selected on compaq nc6000 when 4c395bdd3f2ca8f7e8efad881e16071182c3b8ca is reverted
Submitter	: cedric <cedric@belbone.be>
Date		: 2009-07-29 12:47 (5 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13797
Subject		: iBook G4 doesn't suspend since 2ed8d2b3a8
Submitter	: Jörg Sommer <joerg@alea.gnuu.de>
Date		: 2009-07-18 20:18 (16 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13795
Subject		: abnormal boot and no suspend due to 'async' (fastboot)
Submitter	: Rafal Kaczynski <fscnoboot@wp.pl>
Date		: 2009-07-18 17:19 (16 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13780
Subject		: NULL pointer dereference loading powernowk8
Submitter	: Kurt Roeckx <kurt@roeckx.be>
Date		: 2009-07-15 18:00 (19 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13739
Subject		: 2.6.30 leaking keys on console switch
Submitter	: Andi Kleen <andi@firstfloor.org>
Date		: 2009-07-07 8:44 (27 days old)
References	: http://marc.info/?l=linux-kernel&m=124695628924382&w=4
Handled-By	: Jiri Kosina <jkosina@suse.cz>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13694
Subject		: i915 phantom TV
Submitter	: Maciek Józiewicz <mjoziew@gmail.com>
Date		: 2009-07-02 12:26 (32 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13682
Subject		: The webcam stopped working when upgrading from 2.6.29 to 2.6.30
Submitter	: Nathanael Schaeffer <nathanael.schaeffer@gmail.com>
Date		: 2009-06-30 13:34 (34 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13669
Subject		: Kernel bug with dock driver
Submitter	: Joerg Platte <jplatte@naasa.net>
Date		: 2009-06-14 21:00 (50 days old)
References	: http://lkml.org/lkml/2009/6/14/216
Handled-By	: Henrique de Moraes Holschuh <hmh@hmh.eng.br>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13660
Subject		: Crashes during boot on 2.6.30 / 2.6.31-rc, random programs
Submitter	: Joao Correia <joaomiguelcorreia@gmail.com>
Date		: 2009-06-27 16:07 (37 days old)
References	: http://lkml.org/lkml/2009/6/27/95


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13646
Subject		: warn_on tty_io.c, broken bluetooth
Submitter	: Pavel Machek <pavel@ucw.cz>
Date		: 2009-06-19 17:05 (45 days old)
References	: http://lkml.org/lkml/2009/6/19/187


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13644
Subject		: hibernation/swsusp lockup due to acpi-cpufreq
Submitter	: Johannes Stezenbach <js@sig21.net>
Date		: 2009-06-16 01:27 (48 days old)
References	: http://lkml.org/lkml/2009/6/15/630
		  http://lkml.org/lkml/2009/6/29/504
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13638
Subject		: rt2870 driver is broken for (some) cards
Submitter	: jakob gruber <jakob.gruber@kabelnet.at>
Date		: 2009-06-27 17:33 (37 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13634
Subject		: [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-27 07:02 (37 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13621
Subject		: xfs hangs with assertion failed
Submitter	: Johannes Engel <jcnengel@googlemail.com>
Date		: 2009-06-25 10:07 (39 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13620
Subject		: acpi_enforce_resources broken - conflicting i2c module loaded on some EeePCs
Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date		: 2009-06-25 08:31 (39 days old)
References	: <http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-June/002316.html>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13583
Subject		: pdflush uses 5% CPU on otherwise idle system
Submitter	: Paul Martin <pm@debian.org>
Date		: 2009-06-19 13:33 (45 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13581
Subject		: ath9k doesn't work with newer kernels
Submitter	: Matteo <rootkit85@yahoo.it>
Date		: 2009-06-19 12:04 (45 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13564
Subject		: random general protection fault at boot time caused by khubd.
Submitter	: Pauli <suokkos@gmail.com>
Date		: 2009-06-18 12:44 (46 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13558
Subject		: Tracelog during resume
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-17 11:32 (47 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13554
Subject		: linux-image-2.6.30-1-686, KMS enabled: black screen, no X window
Submitter	: Jos van Wolput <wolput@onsneteindhoven.nl>
Date		: 2009-06-17 06:28 (47 days old)
References	: http://marc.info/?l=linux-kernel&m=124686965407853&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13514
Subject		: acer_wmi causes stack corruption
Submitter	: Rus <harbour@sfinx.od.ua>
Date		: 2009-06-12 08:13 (52 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13512
Subject		: D43 on 2.6.30 doesn't suspend anymore
Submitter	: Daniel Smolik <marvin@mydatex.cz>
Date		: 2009-06-11 20:12 (53 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13502
Subject		: GPE storm causes polling mode, which causes /proc/acpi/battery read to take 4 seconds - MacBookPro4,1
Submitter	:  <sveina@gmail.com>
Date		: 2009-06-10 20:04 (54 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg@gmail.com>
Date		: 2009-05-30 18:51 (65 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz@fias.uni-frankfurt.de>
Date		: 2009-05-28 7:59 (67 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard@free.fr>
Date		: 2009-05-28 18:43 (67 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel@t-online.de>
Date		: 2009-05-23 8:52 (72 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4
		  http://lkml.org/lkml/2009/5/29/389


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2009-05-23 5:08 (72 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira@gmail.com>
Date		: 2009-05-22 13:32 (73 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu@googlemail.com>
Date		: 2009-05-20 14:09 (75 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai@kernel.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick@ostenberg.de>
Date		: 2009-05-19 09:08 (76 days old)
Handled-By	: Rusty Russell <rusty@rustcorp.com.au>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (92 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime@gmx.de>
Date		: 2009-04-30 8:51 (95 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2009-05-14 09:34 (81 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Intel 440GX: Since kernel 2.6.30-rc1, computers hangs randomly but not with kernel <= 2.6.29.6
Submitter	: David Hill <hilld@binarystorm.net>
Date		: 2009-05-01 16:57 (94 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts@gmail.com>
Date		: 2009-04-21 21:35 (104 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista@gmail.com>
Date		: 2009-04-11 14:56 (114 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang@intel.com>
		  Alexey Starikovskiy <astarikovskiy@suse.de>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13897
Subject		: PAT wc & vmap mapping count issue
Submitter	: Jerome Glisse <glisse@freedesktop.org>
Date		: 2009-07-30 13:11 (4 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3869c4aa18835c8c61b44bd0f3ace36e9d3b5bd0
References	: http://marc.info/?l=linux-kernel&m=124895237114605&w=4
Handled-By	: Pallipadi, Venkatesh <venkatesh.pallipadi@intel.com>
Patch		: http://patchwork.kernel.org/patch/38436/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13884
Subject		: x86 CPA incorrect memtype reserving using set_pages_array_xx
Submitter	: Thomas Hellstrom <thellstrom@vmware.com>
Date		: 2009-07-31 13:39 (3 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=9ae2847591c857bed44bc094b908b412bfa1b244
Handled-By	: Thomas Hellstrom <thellstrom@vmware.com>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=22552


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2009-05-26 15:24 (69 days old)
Handled-By	: Frans Pop <elendil@planet.nl>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13337
Subject		: [post 2.6.29 regression] hang during suspend of b44/b43 modules
Submitter	: Tomas Janousek <tomi@nomi.cz>
Date		: 2009-05-18 10:59 (77 days old)
Handled-By	: Johannes Berg <johannes@sipsolutions.net>
Patch		: http://patchwork.kernel.org/patch/37837/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (96 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
		  http://lkml.org/lkml/2009/7/26/213
Handled-By	: Johannes Berg <johannes@sipsolutions.net>
		  David Rientjes <rientjes@google.com>
Patch		: http://patchwork.kernel.org/patch/37655/


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.29 and 2.6.30, unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

_______________________________________________
linux-pm mailing list
linux-pm@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.29 and 2.6.30.

The following bug entry is on the current list of known regressions
introduced between 2.6.29 and 2.6.30.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (96 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
		  http://lkml.org/lkml/2009/7/26/213
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
		  David Rientjes <rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/37655/

2.6.31-rc4: Reported regressions 2.6.29 -> 2.6.30

[Rafael J. Wysocki]

This message contains a list of some regressions introduced between 2.6.29 and
2.6.30, for which there are no fixes in the mainline I know of.  If any of them
have been fixed already, please let me know.

If you know of any other unresolved regressions introduced between 2.6.29
and 2.6.30, please let me know either and I'll add them to the list.
Also, please let me know if any of the entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-07-27      143       48          45
  2009-07-07      138       50          46
  2009-06-29      133       46          43
  2009-06-07      110       35          31
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13797
Subject		: iBook G4 doesn't suspend since 2ed8d2b3a8
Submitter	: Jörg Sommer <joerg@alea.gnuu.de>
Date		: 2009-07-18 20:18 (9 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13795
Subject		: abnormal boot and no suspend due to 'async' (fastboot)
Submitter	: Rafal Kaczynski <fscnoboot@wp.pl>
Date		: 2009-07-18 17:19 (9 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13780
Subject		: NULL pointer dereference loading powernowk8
Submitter	: Kurt Roeckx <kurt@roeckx.be>
Date		: 2009-07-15 18:00 (12 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13751
Subject		: oops on HP/Compaq 6910p lid closure
Submitter	: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date		: 2009-07-09 15:17 (18 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13739
Subject		: 2.6.30 leaking keys on console switch
Submitter	: Andi Kleen <andi@firstfloor.org>
Date		: 2009-07-07 8:44 (20 days old)
References	: http://marc.info/?l=linux-kernel&m=124695628924382&w=4
Handled-By	: Jiri Kosina <jkosina@suse.cz>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13694
Subject		: i915 phantom TV
Submitter	: Maciek Józiewicz <mjoziew@gmail.com>
Date		: 2009-07-02 12:26 (25 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13682
Subject		: The webcam stopped working when upgrading from 2.6.29 to 2.6.30
Submitter	: Nathanael Schaeffer <nathanael.schaeffer@gmail.com>
Date		: 2009-06-30 13:34 (27 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13681
Subject		: A number of usb Devices causes Oops messages and kernel panics.
Submitter	: Alexander Kaltsas <alexkaltsas@gmail.com>
Date		: 2009-06-30 13:06 (27 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13669
Subject		: Kernel bug with dock driver
Submitter	: Joerg Platte <jplatte@naasa.net>
Date		: 2009-06-14 21:00 (43 days old)
References	: http://lkml.org/lkml/2009/6/14/216
Handled-By	: Henrique de Moraes Holschuh <hmh@hmh.eng.br>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13660
Subject		: Crashes during boot on 2.6.30 / 2.6.31-rc, random programs
Submitter	: Joao Correia <joaomiguelcorreia@gmail.com>
Date		: 2009-06-27 16:07 (30 days old)
References	: http://lkml.org/lkml/2009/6/27/95


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13648
Subject		: nfsd: page allocation failure
Submitter	: Justin Piszcz <jpiszcz@lucidpixels.com>
Date		: 2009-06-22 12:08 (35 days old)
References	: http://lkml.org/lkml/2009/6/22/309
		  http://marc.info/?l=linux-kernel&m=124748600712853&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13646
Subject		: warn_on tty_io.c, broken bluetooth
Submitter	: Pavel Machek <pavel@ucw.cz>
Date		: 2009-06-19 17:05 (38 days old)
References	: http://lkml.org/lkml/2009/6/19/187


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13644
Subject		: hibernation/swsusp lockup due to acpi-cpufreq
Submitter	: Johannes Stezenbach <js@sig21.net>
Date		: 2009-06-16 01:27 (41 days old)
References	: http://lkml.org/lkml/2009/6/15/630
		  http://lkml.org/lkml/2009/6/29/504
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13638
Subject		: rt2870 driver is broken for (some) cards
Submitter	: jakob gruber <jakob.gruber@kabelnet.at>
Date		: 2009-06-27 17:33 (30 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13634
Subject		: [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-27 07:02 (30 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13624
Subject		: usb: wrong autosuspend initialization
Submitter	:  <list@phuk.ath.cx>
Date		: 2009-06-25 18:18 (32 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13621
Subject		: xfs hangs with assertion failed
Submitter	: Johannes Engel <jcnengel@googlemail.com>
Date		: 2009-06-25 10:07 (32 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13620
Subject		: acpi_enforce_resources broken - conflicting i2c module loaded on some EeePCs
Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date		: 2009-06-25 08:31 (32 days old)
References	: <http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-June/002316.html>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13583
Subject		: pdflush uses 5% CPU on otherwise idle system
Submitter	: Paul Martin <pm@debian.org>
Date		: 2009-06-19 13:33 (38 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13581
Subject		: ath9k doesn't work with newer kernels
Submitter	: Matteo <rootkit85@yahoo.it>
Date		: 2009-06-19 12:04 (38 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13564
Subject		: random general protection fault at boot time caused by khubd.
Submitter	: Pauli <suokkos@gmail.com>
Date		: 2009-06-18 12:44 (39 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13558
Subject		: Tracelog during resume
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-17 11:32 (40 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13554
Subject		: linux-image-2.6.30-1-686, KMS enabled: black screen, no X window
Submitter	: Jos van Wolput <wolput@onsneteindhoven.nl>
Date		: 2009-06-17 06:28 (40 days old)
References	: http://marc.info/?l=linux-kernel&m=124686965407853&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13518
Subject		: slab grows with NFS write activity.
Submitter	: Andrew Randrianasulu <randrik@mail.ru>
Date		: 2009-06-12 09:51 (45 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13514
Subject		: acer_wmi causes stack corruption
Submitter	: Rus <harbour@sfinx.od.ua>
Date		: 2009-06-12 08:13 (45 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13512
Subject		: D43 on 2.6.30 doesn't suspend anymore
Submitter	: Daniel Smolik <marvin@mydatex.cz>
Date		: 2009-06-11 20:12 (46 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13502
Subject		: GPE storm causes polling mode, which causes /proc/acpi/battery read to take 4 seconds - MacBookPro4,1
Submitter	:  <sveina@gmail.com>
Date		: 2009-06-10 20:04 (47 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13472
Subject		: Oops with minicom and USB serial
Submitter	: Peter Chubb <peterc@gelato.unsw.edu.au>
Date		: 2009-06-05 1:37 (52 days old)
References	: http://marc.info/?l=linux-kernel&m=124416901026700&w=4
Handled-By	: Alan Stern <stern@rowland.harvard.edu>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13471
Subject		: Loading parport_pc kills the keyboard if ACPI is enabled
Submitter	: Ozan Çağlayan <ozan@pardus.org.tr>
Date		: 2009-06-04 9:12 (53 days old)
References	: http://marc.info/?l=linux-kernel&m=124410667532558&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13424
Subject		: possible deadlock when doing governor switching
Submitter	: Shaohua Li <shaohua.li@intel.com>
Date		: 2009-05-31 16:36 (57 days old)
References	: http://www.spinics.net/lists/cpufreq/msg00711.html
		  http://lkml.org/lkml/2009/6/28/405
Handled-By	: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg@gmail.com>
Date		: 2009-05-30 18:51 (58 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz@fias.uni-frankfurt.de>
Date		: 2009-05-28 7:59 (60 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard@free.fr>
Date		: 2009-05-28 18:43 (60 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel@t-online.de>
Date		: 2009-05-23 8:52 (65 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4
		  http://lkml.org/lkml/2009/5/29/389


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2009-05-23 5:08 (65 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira@gmail.com>
Date		: 2009-05-22 13:32 (66 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu@googlemail.com>
Date		: 2009-05-20 14:09 (68 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai@kernel.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick@ostenberg.de>
Date		: 2009-05-19 09:08 (69 days old)
Handled-By	: Rusty Russell <rusty@rustcorp.com.au>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13337
Subject		: [post 2.6.29 regression] hang during suspend of b44/b43 modules
Submitter	: Tomas Janousek <tomi@nomi.cz>
Date		: 2009-05-18 10:59 (70 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (85 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (89 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
Handled-By	: Johannes Berg <johannes@sipsolutions.net>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime@gmx.de>
Date		: 2009-04-30 8:51 (88 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2009-05-14 09:34 (74 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Intel 440GX: Since kernel 2.6.30-rc1, computers hangs randomly but not with kernel <= 2.6.29.4
Submitter	: David Hill <hilld@binarystorm.net>
Date		: 2009-05-01 16:57 (87 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista@gmail.com>
Date		: 2009-04-11 14:56 (107 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang@intel.com>
		  Alexey Starikovskiy <astarikovskiy@suse.de>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13649
Subject		: Bad page state in process with various applications
Submitter	: Maxim Levitsky <maximlevitsky@gmail.com>
Date		: 2009-06-20 15:27 (37 days old)
References	: http://marc.info/?l=linux-mm&m=124551168828090&w=4
Handled-By	: Mel Gorman <mel@csn.ul.ie>
Patch		: http://patchwork.kernel.org/patch/33130/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13475
Subject		: suspend/hibernate lockdep warning
Submitter	: Dave Young <hidave.darkstar@gmail.com>
Date		: 2009-06-02 10:00 (55 days old)
References	: http://marc.info/?l=linux-kernel&m=124393723321241&w=4
Handled-By	: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Patch		: http://patchwork.kernel.org/patch/28660/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2009-05-26 15:24 (62 days old)
Handled-By	: Frans Pop <elendil@planet.nl>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.29 and 2.6.30, unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael


------------------------------------------------------------------------------
--
_______________________________________________
Dri-devel mailing list
Dri-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-devel

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.29 and 2.6.30.

The following bug entry is on the current list of known regressions
introduced between 2.6.29 and 2.6.30.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (89 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
Handled-By	: Johannes Berg <johannes@sipsolutions.net>

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.29 and 2.6.30.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.29 and 2.6.30.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> Subject		: Page allocation failures with b43 and p54usb
> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date		: 2009-04-29 21:01 (89 days old)
> References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> 		  http://lkml.org/lkml/2009/6/7/136
> Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

This bug was fixed by commit 781b2ba6eb5f22440afac9c79a89ebd6e3674a60
entitled "SLUB: Out-of-memory diagnostics" by Pekka Enberg
<penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org> and dated Wed Jun 10 18:50:32 2009 +0300.

The fault occurred because when CONFIG_SLUB_DEBUG was set, many of the
memory allocations for wireless buffers were increased from O(0) to
O(1) causing memory fragmentation, and eventually there were no
remaining O(1) fragments. This problem is unlikely to affect most
users as none of the distos turn on the above debug option.

This bug should be marked "closed with patch".

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Sun, 26 Jul 2009, Larry Finger wrote:

> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.29 and 2.6.30.
> > 
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.29 and 2.6.30.  Please verify if it still should
> > be listed and let me know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> > Subject		: Page allocation failures with b43 and p54usb
> > Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> > Date		: 2009-04-29 21:01 (89 days old)
> > References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> > 		  http://lkml.org/lkml/2009/6/7/136
> > Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
> 
> This bug was fixed by commit 781b2ba6eb5f22440afac9c79a89ebd6e3674a60
> entitled "SLUB: Out-of-memory diagnostics" by Pekka Enberg
> <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org> and dated Wed Jun 10 18:50:32 2009 +0300.
> 

Hmm, I'm remembering differently.  I thought the root problem here has 
only been fixed in Pekka's slab-2.6.git tree with "slub: add option to 
disable higher order debugging slabs" and isn't currently in Linus' tree.

> The fault occurred because when CONFIG_SLUB_DEBUG was set, many of the
> memory allocations for wireless buffers were increased from O(0) to
> O(1) causing memory fragmentation, and eventually there were no
> remaining O(1) fragments. This problem is unlikely to affect most
> users as none of the distos turn on the above debug option.
> 

It only happens when CONFIG_SLUB_DEBUG_ON is enabled for caches with 
sizes that increase as the result of the added metadata.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Mon, Jul 27, 2009 at 3:24 AM, David Rientjes<rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> wrote:
> On Sun, 26 Jul 2009, Larry Finger wrote:
>
>> Rafael J. Wysocki wrote:
>> > This message has been generated automatically as a part of a report
>> > of regressions introduced between 2.6.29 and 2.6.30.
>> >
>> > The following bug entry is on the current list of known regressions
>> > introduced between 2.6.29 and 2.6.30.  Please verify if it still should
>> > be listed and let me know (either way).
>> >
>> >
>> > Bug-Entry   : http://bugzilla.kernel.org/show_bug.cgi?id=13319
>> > Subject             : Page allocation failures with b43 and p54usb
>> > Submitter   : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
>> > Date                : 2009-04-29 21:01 (89 days old)
>> > References  : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
>> >               http://lkml.org/lkml/2009/6/7/136
>> > Handled-By  : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
>>
>> This bug was fixed by commit 781b2ba6eb5f22440afac9c79a89ebd6e3674a60
>> entitled "SLUB: Out-of-memory diagnostics" by Pekka Enberg
>> <penberg-bbCR+/B0CizivPeTLB3BmA@public.gmane.org> and dated Wed Jun 10 18:50:32 2009 +0300.
>>
>
> Hmm, I'm remembering differently.  I thought the root problem here has
> only been fixed in Pekka's slab-2.6.git tree with "slub: add option to
> disable higher order debugging slabs" and isn't currently in Linus' tree.

Yup, the fix is in slab.git and queued for 2.6.32. There was some
complaints from Christoph from the patch that need to be addressed
still.

                                        Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 1169 bytes --]

On Mon, 27 Jul 2009, Pekka Enberg wrote:

> > Hmm, I'm remembering differently.  I thought the root problem here has
> > only been fixed in Pekka's slab-2.6.git tree with "slub: add option to
> > disable higher order debugging slabs" and isn't currently in Linus' tree.
> 
> Yup, the fix is in slab.git and queued for 2.6.32. There was some
> complaints from Christoph from the patch that need to be addressed
> still.
> 

From what I recall, he asked that calculate_sizes() be called twice, first 
to determine if get_order(s->size) increased as the result of the metadata 
and, if so, a second time with the flags disabled.

slab_debug=O only disables debugging options that increase the min order 
of slab as defined in DEBUG_FLAGS; it doesn't selectively disable some of 
them when get_order(s->size) grows.  So it's quite sane, like my patch 
does, to disable all DEBUG_FLAGS when

	get_order(s->objsize) + DEBUG_SIZE_FLAGS > get_order(s->objsize)

without calling calculate_sizes() twice.

We need DEBUG_FLAGS to determine which flags to mask off to reduce the 
minimum order, so I don't see DEBUG_FLAGS_SIZE as troublesome.

Christoph?

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Mon, 27 Jul 2009, David Rientjes wrote:

> We need DEBUG_FLAGS to determine which flags to mask off to reduce the
> minimum order, so I don't see DEBUG_FLAGS_SIZE as troublesome.
>
> Christoph?

Post a patch? Otherwise just go ahead.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Mon, 27 Jul 2009, Christoph Lameter wrote:

> On Mon, 27 Jul 2009, David Rientjes wrote:
> 
> > We need DEBUG_FLAGS to determine which flags to mask off to reduce the
> > minimum order, so I don't see DEBUG_FLAGS_SIZE as troublesome.
> >
> > Christoph?
> 
> Post a patch? Otherwise just go ahead.
> 
> 

My patch is already in Pekka's slab-2.6.git tree at 
http://git.kernel.org/?p=linux/kernel/git/penberg/slab-2.6.git;a=commit;h=fa5ec8a1f66f3c2a3af723abcf8085509c9ee682

You had proposed http://marc.info/?l=linux-kernel&m=124725166205814, which 
moves the mask to kmem_cache_open() and calls calculate_sizes() twice.  
That eliminates DEBUG_FLAGS_SIZE, but I don't see that define as being 
troublesome since we must define DEBUG_FLAGS to specify what options add 
metdata anyway.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Mon, 27 Jul 2009, David Rientjes wrote:

> My patch is already in Pekka's slab-2.6.git tree at
> http://git.kernel.org/?p=linux/kernel/git/penberg/slab-2.6.git;a=commit;h=fa5ec8a1f66f3c2a3af723abcf8085509c9ee682
>
> You had proposed http://marc.info/?l=linux-kernel&m=124725166205814, which
> moves the mask to kmem_cache_open() and calls calculate_sizes() twice.
> That eliminates DEBUG_FLAGS_SIZE, but I don't see that define as being
> troublesome since we must define DEBUG_FLAGS to specify what options add
> metdata anyway.

My prosal was to use the size and objsize parameters. You would only have
to call calculate_sizes() twice when the comparison of the order of size
and objsize would be different.

Doing so would simplify additing future flags. If you do your own
calculations (like in the patch) then you have to replicate the size
calculation from calculate_sizes() somehow. Is the duplicate calculation
really accurate regarding alignment and other special casing?

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Mon, 27 Jul 2009, Christoph Lameter wrote:

> My prosal was to use the size and objsize parameters. You would only have
> to call calculate_sizes() twice when the comparison of the order of size
> and objsize would be different.
> 
> Doing so would simplify additing future flags. If you do your own
> calculations (like in the patch) then you have to replicate the size
> calculation from calculate_sizes() somehow. Is the duplicate calculation
> really accurate regarding alignment and other special casing?
> 

Ok, fair enough.  It seems like a matter of taste in implementation but 
your proposal is also more extendable than mine, and I'm definitely not 
going to argue your taste vs. mine when it comes to slub :)

I'll write an incremental patch on top of Pekka's for-next branch to 
implement your idea.

2.6.31-rc2: Reported regressions 2.6.29 -> 2.6.30

[Rafael J. Wysocki]

This message contains a list of some regressions introduced between 2.6.29 and
2.6.30, for which there are no fixes in the mainline I know of.  If any of them
have been fixed already, please let me know.

If you know of any other unresolved regressions introduced between 2.6.29
and 2.6.30, please let me know either and I'll add them to the list.
Also, please let me know if any of the entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-07-07      138       50          46
  2009-06-29      133       46          43
  2009-06-07      110       35          31
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13694
Subject		: i915 phantom TV
Submitter	: Maciek Józiewicz <mjoziew@gmail.com>
Date		: 2009-07-02 12:26 (5 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13682
Subject		: The webcam stopped working when upgrading from 2.6.29 to 2.6.30
Submitter	: Nathanael Schaeffer <nathanael.schaeffer@gmail.com>
Date		: 2009-06-30 13:34 (7 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13681
Subject		: A number of usb Devices causes Oops messages and kernel panics.
Submitter	: Alexander Kaltsas <alexkaltsas@gmail.com>
Date		: 2009-06-30 13:06 (7 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13669
Subject		: Kernel bug with dock driver
Submitter	: Joerg Platte <jplatte@naasa.net>
Date		: 2009-06-14 21:00 (23 days old)
References	: http://lkml.org/lkml/2009/6/14/216
Handled-By	: Henrique de Moraes Holschuh <hmh@hmh.eng.br>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13668
Subject		: Can't boot 2.6.30 powerpc kernel under qemu.
Submitter	: Rob Landley <rob@landley.net>
Date		: 2009-06-27 18:08 (10 days old)
References	: http://lkml.org/lkml/2009/6/27/159


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13660
Subject		: Crashes during boot on 2.6.30 / 2.6.31-rc, random programs
Submitter	: Joao Correia <joaomiguelcorreia@gmail.com>
Date		: 2009-06-27 16:07 (10 days old)
References	: http://lkml.org/lkml/2009/6/27/95


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13651
Subject		: Anyone know what happened with PC speaker in 2.6.30?
Submitter	: Michael Tokarev <mjt@tls.msk.ru>
Date		: 2009-06-15 14:41 (22 days old)
References	: http://marc.info/?l=linux-kernel&m=124507695427817&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13648
Subject		: nfsd: page allocation failure
Submitter	: Justin Piszcz <jpiszcz@lucidpixels.com>
Date		: 2009-06-22 12:08 (15 days old)
References	: http://lkml.org/lkml/2009/6/22/309


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13647
Subject		: fb/mmap lockdep report.
Submitter	: Dave Jones <davej@redhat.com>
Date		: 2009-06-21 13:33 (16 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=513adb58685615b0b1d47a3f0d40f5352beff189
References	: http://lkml.org/lkml/2009/6/21/90
		  http://lkml.org/lkml/2009/6/21/122


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13646
Subject		: warn_on tty_io.c, broken bluetooth
Submitter	: Pavel Machek <pavel@ucw.cz>
Date		: 2009-06-19 17:05 (18 days old)
References	: http://lkml.org/lkml/2009/6/19/187


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13644
Subject		: hibernation/swsusp lockup due to acpi-cpufreq
Submitter	: Johannes Stezenbach <js@sig21.net>
Date		: 2009-06-16 01:27 (21 days old)
References	: http://lkml.org/lkml/2009/6/15/630
		  http://lkml.org/lkml/2009/6/29/504
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13638
Subject		: rt2870 driver is broken for (some) cards
Submitter	: jakob gruber <jakob.gruber@kabelnet.at>
Date		: 2009-06-27 17:33 (10 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13634
Subject		: [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-27 07:02 (10 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13624
Subject		: usb: wrong autosuspend initialization
Submitter	:  <list@phuk.ath.cx>
Date		: 2009-06-25 18:18 (12 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13621
Subject		: xfs hangs with assertion failed
Submitter	: Johannes Engel <jcnengel@googlemail.com>
Date		: 2009-06-25 10:07 (12 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13620
Subject		: acpi_enforce_resources broken - conflicting i2c module loaded on some EeePCs
Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date		: 2009-06-25 08:31 (12 days old)
References	: <http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-June/002316.html>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13583
Subject		: pdflush uses 5% CPU on otherwise idle system
Submitter	: Paul Martin <pm@debian.org>
Date		: 2009-06-19 13:33 (18 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13581
Subject		: ath9k doesn't work with newer kernels
Submitter	: Matteo <rootkit85@yahoo.it>
Date		: 2009-06-19 12:04 (18 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13564
Subject		: random general protection fault at boot time caused by khubd.
Submitter	: Pauli <suokkos@gmail.com>
Date		: 2009-06-18 12:44 (19 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13558
Subject		: Tracelog during resume
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml@volny.cz>
Date		: 2009-06-17 11:32 (20 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13554
Subject		: linux-image-2.6.30-1-686, KMS enabled: black screen, no X window
Submitter	: Jos van Wolput <wolput@onsneteindhoven.nl>
Date		: 2009-06-17 06:28 (20 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13518
Subject		: slab grows with NFS write activity.
Submitter	: Andrew Randrianasulu <randrik@mail.ru>
Date		: 2009-06-12 09:51 (25 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13514
Subject		: acer_wmi causes stack corruption
Submitter	: Rus <harbour@sfinx.od.ua>
Date		: 2009-06-12 08:13 (25 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13512
Subject		: D43 on 2.6.30 doesn't suspend anymore
Submitter	: Daniel Smolik <marvin@mydatex.cz>
Date		: 2009-06-11 20:12 (26 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13502
Subject		: GPE storm causes polling mode, which causes /proc/acpi/battery read to take 4 seconds - MacBookPro4,1
Submitter	:  <sveina@gmail.com>
Date		: 2009-06-10 20:04 (27 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13472
Subject		: Oops with minicom and USB serial
Submitter	: Peter Chubb <peterc@gelato.unsw.edu.au>
Date		: 2009-06-05 1:37 (32 days old)
References	: http://marc.info/?l=linux-kernel&m=124416901026700&w=4
Handled-By	: Alan Stern <stern@rowland.harvard.edu>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13471
Subject		: Loading parport_pc kills the keyboard if ACPI is enabled
Submitter	: Ozan Çağlayan <ozan@pardus.org.tr>
Date		: 2009-06-04 9:12 (33 days old)
References	: http://marc.info/?l=linux-kernel&m=124410667532558&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13424
Subject		: possible deadlock when doing governor switching
Submitter	: Shaohua Li <shaohua.li@intel.com>
Date		: 2009-05-31 16:36 (37 days old)
References	: http://www.spinics.net/lists/cpufreq/msg00711.html
		  http://lkml.org/lkml/2009/6/28/405
Handled-By	: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg@gmail.com>
Date		: 2009-05-30 18:51 (38 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz@fias.uni-frankfurt.de>
Date		: 2009-05-28 7:59 (40 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard@free.fr>
Date		: 2009-05-28 18:43 (40 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel@t-online.de>
Date		: 2009-05-23 8:52 (45 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4
		  http://lkml.org/lkml/2009/5/29/389


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2009-05-23 5:08 (45 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira@gmail.com>
Date		: 2009-05-22 13:32 (46 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu@googlemail.com>
Date		: 2009-05-20 14:09 (48 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai@kernel.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick@ostenberg.de>
Date		: 2009-05-19 09:08 (49 days old)
Handled-By	: Rusty Russell <rusty@rustcorp.com.au>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13337
Subject		: [post 2.6.29 regression] hang during suspend of b44/b43 modules
Submitter	: Tomas Janousek <tomi@nomi.cz>
Date		: 2009-05-18 10:59 (50 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (65 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (69 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
Handled-By	: Johannes Berg <johannes@sipsolutions.net>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime@gmx.de>
Date		: 2009-04-30 8:51 (68 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2009-05-14 09:34 (54 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13277
Subject		: 2.6.30 regression - hang on 2nd resume - bisected - Thinkpad X40
Submitter	: Daniel Vetter <daniel@ffwll.ch>
Date		: 2009-05-11 10:08 (57 days old)
Handled-By	: Len Brown <len.brown@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Intel 440GX: Since kernel 2.6.30-rc1, computers hangs randomly but not with kernel <= 2.6.29.4
Submitter	: David Hill <hilld@binarystorm.net>
Date		: 2009-05-01 16:57 (67 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13179
Subject		: CD-R: wodim intermittent failures
Submitter	: Andy Isaacson <adi@hexapodia.org>
Date		: 2009-04-21 1:52 (77 days old)
References	: http://marc.info/?l=linux-kernel&m=124027879214231&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13119
Subject		: Trouble with make-install from a NFS mount
Submitter	: Gregory Haskins <ghaskins@novell.com>
Date		: 2009-04-14 21:32 (84 days old)
References	: http://marc.info/?l=linux-kernel&m=123974482327044&w=4
Handled-By	: H. Peter Anvin <hpa@zytor.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista@gmail.com>
Date		: 2009-04-11 14:56 (87 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang@intel.com>
		  Alexey Starikovskiy <astarikovskiy@suse.de>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13663
Subject		: suspend to ram regression (IDE related)
Submitter	: Etienne Basset <etienne.basset@numericable.fr>
Date		: 2009-06-26 17:40 (11 days old)
References	: http://lkml.org/lkml/2009/6/26/242
		  http://lkml.org/lkml/2009/6/29/126
Handled-By	: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Patch		: http://patchwork.kernel.org/patch/32719/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13649
Subject		: Bad page state in process with various applications
Submitter	: Maxim Levitsky <maximlevitsky@gmail.com>
Date		: 2009-06-20 15:27 (17 days old)
References	: http://marc.info/?l=linux-mm&m=124551168828090&w=4
Handled-By	: Mel Gorman <mel@csn.ul.ie>
Patch		: http://patchwork.kernel.org/patch/33130/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13475
Subject		: suspend/hibernate lockdep warning
Submitter	: Dave Young <hidave.darkstar@gmail.com>
Date		: 2009-06-02 10:00 (35 days old)
References	: http://marc.info/?l=linux-kernel&m=124393723321241&w=4
Handled-By	: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Patch		: http://patchwork.kernel.org/patch/28660/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil@planet.nl>
Date		: 2009-05-26 15:24 (42 days old)
Handled-By	: Frans Pop <elendil@planet.nl>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.29 and 2.6.30, unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael


------------------------------------------------------------------------------
Enter the BlackBerry Developer Challenge  
This is your chance to win up to $100,000 in prizes! For a limited time, 
vendors submitting new applications to BlackBerry App World(TM) will have 
the opportunity to enter the BlackBerry Developer Challenge. See full prize 
details at: http://p.sf.net/sfu/blackberry
--
_______________________________________________
Dri-devel mailing list
Dri-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dri-devel

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.29 and 2.6.30.

The following bug entry is on the current list of known regressions
introduced between 2.6.29 and 2.6.30.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (69 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.29 and 2.6.30.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.29 and 2.6.30.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> Subject		: Page allocation failures with b43 and p54usb
> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date		: 2009-04-29 21:01 (69 days old)
> References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> 		  http://lkml.org/lkml/2009/6/7/136
> Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

I have not seen the fix yet, but one is being prepared. I think the
bug can be closed.

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Mon, 6 Jul 2009, Larry Finger wrote:

> I have not seen the fix yet, but one is being prepared. I think the
> bug can be closed.
> 

http://patchwork.kernel.org/patch/34385 should fix your issue (try with 
CONFIG_SLUB_DEBUG_ON still enabled and slub_debug=O on the command line).

Pekka indicated he wanted this fixed in 2.6.31, so he'll probably push it 
to Linus before the 2.6.31-rc3.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi,

On Mon, 6 Jul 2009, Larry Finger wrote:
>> I have not seen the fix yet, but one is being prepared. I think the
>> bug can be closed.

On Tue, Jul 7, 2009 at 9:29 AM, David Rientjes<rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> wrote:
> http://patchwork.kernel.org/patch/34385 should fix your issue (try with
> CONFIG_SLUB_DEBUG_ON still enabled and slub_debug=O on the command line).
>
> Pekka indicated he wanted this fixed in 2.6.31, so he'll probably push it
> to Linus before the 2.6.31-rc3.

Yup, if it's not too much trouble Larry, I'd appreciate if you gave it
a spin before I apply the sucker. Note to regression trackers, I don't
think this should go to -stable because it depends on other patches in
mainline and there's an obvious workaround for the problem (disable
CONFIG_SLUB_DEBUG_ON). Furthermore, it's very unlikely people will hit
this on production configurations anyway.

                        Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Pekka Enberg wrote:
> 
> Yup, if it's not too much trouble Larry, I'd appreciate if you gave it
> a spin before I apply the sucker. Note to regression trackers, I don't
> think this should go to -stable because it depends on other patches in
> mainline and there's an obvious workaround for the problem (disable
> CONFIG_SLUB_DEBUG_ON). Furthermore, it's very unlikely people will hit
> this on production configurations anyway.

Pekka,

I have been running the patch for ~24 hours with slub_debug=0 as a
boot option. So far, no problems. My workload has not involved as many
network operations as some times, but my memory has not fragmented.
The output of 'cat /proc/buddyinfo' is as follows:

Node 0, zone      DMA      8      5      5      4      5      5      5
     4      3      0      1
Node 0, zone    DMA32   1804   1585   3007     36      0      0      0
     0      1      0      0

As might be expected, the high-order fragments are gone, but the O(1)
pieces have not been depleted.

Larry

2.6.31-rc1-git3: Reported regressions 2.6.29 -> 2.6.30

[Rafael J. Wysocki]

[NOTES:
 * I hope you notice the jump of the number of reported regressions after 2.6.30
   was released.
 * Please let me know which of these bugs have been fixed already (ideally
   please also provide the name of the fix commit).
 * The post-2.6.30 reports were flooded by the megre window noise that made
   them very difficult to track.]

This message contains a list of some regressions introduced between 2.6.29 and
2.6.30, for which there are no fixes in the mainline I know of.  If any of them
have been fixed already, please let me know.

If you know of any other unresolved regressions introduced between 2.6.29
and 2.6.30, please let me know either and I'll add them to the list.
Also, please let me know if any of the entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-06-29      133       46          43
  2009-06-07      110       35          31
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13669
Subject		: Kernel bug with dock driver
Submitter	: Joerg Platte <jplatte-v18Uk5sXZWJeoWH0uzbU5w@public.gmane.org>
Date		: 2009-06-14 21:00 (15 days old)
References	: http://lkml.org/lkml/2009/6/14/216
Handled-By	: Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13668
Subject		: Can't boot 2.6.30 powerpc kernel under qemu.
Submitter	: Rob Landley <rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org>
Date		: 2009-06-27 18:08 (2 days old)
References	: http://lkml.org/lkml/2009/6/27/159


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13660
Subject		: Crashes during boot on 2.6.30 / 2.6.31-rc, random programs
Submitter	: Joao Correia <joaomiguelcorreia-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-06-27 16:07 (2 days old)
References	: http://lkml.org/lkml/2009/6/27/95


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13651
Subject		: Anyone know what happened with PC speaker in 2.6.30?
Submitter	: Michael Tokarev <mjt-XAri/EZa3C4vJsYlp49lxw@public.gmane.org>
Date		: 2009-06-15 14:41 (14 days old)
References	: http://marc.info/?l=linux-kernel&m=124507695427817&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13649
Subject		: Bad page state in process with various applications
Submitter	: Maxim Levitsky <maximlevitsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-06-20 15:27 (9 days old)
References	: http://marc.info/?l=linux-mm&m=124551168828090&w=4
Handled-By	: Mel Gorman <mel-wPRd99KPJ+uzQB+pC5nmwQ@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13648
Subject		: nfsd: page allocation failure
Submitter	: Justin Piszcz <jpiszcz-BP4nVm5VUdNhbmWW9KSYcQ@public.gmane.org>
Date		: 2009-06-22 12:08 (7 days old)
References	: http://lkml.org/lkml/2009/6/22/309


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13647
Subject		: fb/mmap lockdep report.
Submitter	: Dave Jones <davej-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Date		: 2009-06-21 13:33 (8 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=513adb58685615b0b1d47a3f0d40f5352beff189
References	: http://lkml.org/lkml/2009/6/21/90
		  http://lkml.org/lkml/2009/6/21/122


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13646
Subject		: warn_on tty_io.c, broken bluetooth
Submitter	: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>
Date		: 2009-06-19 17:05 (10 days old)
References	: http://lkml.org/lkml/2009/6/19/187


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13644
Subject		: hibernation/swsusp lockup due to acpi-cpufreq
Submitter	: Johannes Stezenbach <js-FF7aIK3TAVNeoWH0uzbU5w@public.gmane.org>
Date		: 2009-06-16 01:27 (13 days old)
References	: http://lkml.org/lkml/2009/6/15/630
Handled-By	: Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13634
Subject		: [drm:drm_wait_vblank] failed to acquire vblank counter
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml-VIXq6x/3rUk@public.gmane.org>
Date		: 2009-06-27 07:02 (2 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13624
Subject		: usb: wrong autosuspend initialization
Submitter	:  <list-2tUql6aCh3Vfq8cQ1yknNg@public.gmane.org>
Date		: 2009-06-25 18:18 (4 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13621
Subject		: xfs hangs with assertion failed
Submitter	: Johannes Engel <jcnengel-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Date		: 2009-06-25 10:07 (4 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13620
Subject		: acpi_enforce_resources broken - conflicting i2c module loaded on some EeePCs
Submitter	: Alan Jenkins <alan-jenkins-cCz0Lq7MMjm9FHfhHBbuYA@public.gmane.org>
Date		: 2009-06-25 08:31 (4 days old)
References	: <http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-June/002316.html>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13613
Subject		: lockups with JFS (inconsistent lock state)
Submitter	: Jan &quot;Yenya&quot; Kasprzak <kas-0hYGf3jDe+XrBKCeMvbIDA@public.gmane.org>
Date		: 2009-06-24 09:35 (5 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13581
Subject		: ath9k doesn't work with newer kernels
Submitter	: Matteo <rootkit85-whZMOeQn8C0@public.gmane.org>
Date		: 2009-06-19 12:04 (10 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13558
Subject		: Tracelog during resume
Submitter	: Cijoml Cijomlovic Cijomlov <cijoml-VIXq6x/3rUk@public.gmane.org>
Date		: 2009-06-17 11:32 (12 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13554
Subject		: linux-image-2.6.30-1-686, KMS enabled: black screen, no X window
Submitter	: Jos van Wolput <wolput-kN7GrHn7egj0B9fh5IxImPP6llvjuJOh@public.gmane.org>
Date		: 2009-06-17 06:28 (12 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13528
Subject		: au0828: major drop in reception quality between 2.6.29.4 and 2.6.30 on HVR-950q
Submitter	: Jim Faulkner <jfaulkne-1vnkWVZi4QaVc3sceRu5cw@public.gmane.org>
Date		: 2009-06-13 19:34 (16 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13518
Subject		: slab grows with NFS write activity.
Submitter	: Andrew Randrianasulu <randrik-JGs/UdohzUI@public.gmane.org>
Date		: 2009-06-12 09:51 (17 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13514
Subject		: acer_wmi causes stack corruption
Submitter	: Rus <harbour-K87ZgELTUEPsG83rWm+8vg@public.gmane.org>
Date		: 2009-06-12 08:13 (17 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13512
Subject		: D43 on 2.6.30 doesn't suspend anymore
Submitter	: Daniel Smolik <marvin-0pWKB23IDFjrBKCeMvbIDA@public.gmane.org>
Date		: 2009-06-11 20:12 (18 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13502
Subject		: GPE storm causes polling mode, which causes /proc/acpi/battery read to take 4 seconds - MacBookPro4,1
Submitter	:  <sveina-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-06-10 20:04 (19 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13472
Subject		: Oops with minicom and USB serial
Submitter	: Peter Chubb <peterc-M3ycANVxPotyL3EAZA59ERCuuivNXqWP@public.gmane.org>
Date		: 2009-06-05 1:37 (24 days old)
References	: http://marc.info/?l=linux-kernel&m=124416901026700&w=4
Handled-By	: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13471
Subject		: Loading parport_pc kills the keyboard if ACPI is enabled
Submitter	: Ozan Çağlayan <ozan-caicS1wCkhO6A22drWdTBw@public.gmane.org>
Date		: 2009-06-04 9:12 (25 days old)
References	: http://marc.info/?l=linux-kernel&m=124410667532558&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13424
Subject		: possible deadlock when doing governor switching
Submitter	: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-31 16:36 (29 days old)
References	: http://www.spinics.net/lists/cpufreq/msg00711.html
Handled-By	: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-30 18:51 (30 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz-wOpdxP1gw6Cc+IqHO83+wjjhTm2NLCe8@public.gmane.org>
Date		: 2009-05-28 7:59 (32 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard-GANU6spQydw@public.gmane.org>
Date		: 2009-05-28 18:43 (32 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel-zqRNUXuvxA0b1SvskN2V4Q@public.gmane.org>
Date		: 2009-05-23 8:52 (37 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4
		  http://lkml.org/lkml/2009/5/29/389


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-23 5:08 (37 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: rt2x00: slow wifi with correct basic rate bitmap
Submitter	: Alejandro Riveira <ariveira-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-22 13:32 (38 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Date		: 2009-05-20 14:09 (40 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick-nxAOmsU53hB6lmGzAMPh1A@public.gmane.org>
Date		: 2009-05-19 09:08 (41 days old)
Handled-By	: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13337
Subject		: [post 2.6.29 regression] hang during suspend of b44/b43 modules
Submitter	: Tomas Janousek <tomi-YoqI/XImC7s@public.gmane.org>
Date		: 2009-05-18 10:59 (42 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-03 16:22 (57 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (61 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime-Mmb7MZpHnFY@public.gmane.org>
Date		: 2009-04-30 8:51 (60 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
Date		: 2009-05-14 09:34 (46 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13277
Subject		: 2.6.30 regression - hang on 2nd resume - bisected - Thinkpad X40
Submitter	: Daniel Vetter <daniel-/w4YWyX8dFk@public.gmane.org>
Date		: 2009-05-11 10:08 (49 days old)
Handled-By	: Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Intel 440GX: Since kernel 2.6.30-rc1, computers hangs randomly but not with kernel <= 2.6.29.4
Submitter	: David Hill <hilld-HTiBYHdybX7UkGsOFmftXw@public.gmane.org>
Date		: 2009-05-01 16:57 (59 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13179
Subject		: CD-R: wodim intermittent failures
Submitter	: Andy Isaacson <adi-3HqRAUrWAWyGglJvpFV4uA@public.gmane.org>
Date		: 2009-04-21 1:52 (69 days old)
References	: http://marc.info/?l=linux-kernel&m=124027879214231&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13119
Subject		: Trouble with make-install from a NFS mount
Submitter	: Gregory Haskins <ghaskins-Et1tbQHTxzrQT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-14 21:32 (76 days old)
References	: http://marc.info/?l=linux-kernel&m=123974482327044&w=4
Handled-By	: H. Peter Anvin <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-11 14:56 (79 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
		  Alexey Starikovskiy <astarikovskiy-l3A5Bk7waGM@public.gmane.org>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13663
Subject		: suspend to ram regression (IDE related)
Submitter	: Etienne Basset <etienne.basset-Bf/eaXMDFuuXqB7oj33eUg@public.gmane.org>
Date		: 2009-06-26 17:40 (3 days old)
References	: http://lkml.org/lkml/2009/6/26/242
Handled-By	: Bartlomiej Zolnierkiewicz <bzolnier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/32719/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13475
Subject		: suspend/hibernate lockdep warning
Submitter	: Dave Young <hidave.darkstar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-06-02 10:00 (27 days old)
References	: http://marc.info/?l=linux-kernel&m=124393723321241&w=4
Handled-By	: Mathieu Desnoyers <mathieu.desnoyers-scC8bbJcJLCw5LPnMra/2Q@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/28660/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org>
Date		: 2009-05-26 15:24 (34 days old)
Handled-By	: Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21671
		  http://bugzilla.kernel.org/attachment.cgi?id=21672


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions introduced
between 2.6.29 and 2.6.30, unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.29 and 2.6.30.

The following bug entry is on the current list of known regressions
introduced between 2.6.29 and 2.6.30.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (61 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
		  http://lkml.org/lkml/2009/6/7/136
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.29 and 2.6.30.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.29 and 2.6.30.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> Subject		: Page allocation failures with b43 and p54usb
> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date		: 2009-04-29 21:01 (61 days old)
> References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> 		  http://lkml.org/lkml/2009/6/7/136
> Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

The cause of these failures has been determined. The wireless
subsystem frequently requests buffers of size 4096, but when SLUB
debugging is enabled and the debug info is added, the request becomes
of order 1 and memory becomes fragmented.

A controversial "fix" in which SLUB debugging was disabled for
allocations where adding such debugging info would increase the order
was discussed and tried. With a quick look at the commit list for
Linus's tree, I don't see that such a patch is available, but I will
be corrected if I missed it.

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

On Monday 29 June 2009, Larry Finger wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.29 and 2.6.30.
> > 
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.29 and 2.6.30.  Please verify if it still should
> > be listed and let me know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> > Subject		: Page allocation failures with b43 and p54usb
> > Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> > Date		: 2009-04-29 21:01 (61 days old)
> > References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> > 		  http://lkml.org/lkml/2009/6/7/136
> > Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
> 
> The cause of these failures has been determined. The wireless
> subsystem frequently requests buffers of size 4096, but when SLUB
> debugging is enabled and the debug info is added, the request becomes
> of order 1 and memory becomes fragmented.
> 
> A controversial "fix" in which SLUB debugging was disabled for
> allocations where adding such debugging info would increase the order
> was discussed and tried. With a quick look at the commit list for
> Linus's tree, I don't see that such a patch is available, but I will
> be corrected if I missed it.

Thanks for the update.

Hmm, isn't it suboptimal to use a slab allocator for allocations taking up an
entire page?  That's the case on some architectures and seems to be the root
cause of the issue at hand.

Best,
Rafael

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Mon, 29 Jun 2009, Larry Finger wrote:

> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> > Subject		: Page allocation failures with b43 and p54usb
> > Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> > Date		: 2009-04-29 21:01 (61 days old)
> > References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> > 		  http://lkml.org/lkml/2009/6/7/136
> > Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
> 
> The cause of these failures has been determined. The wireless
> subsystem frequently requests buffers of size 4096, but when SLUB
> debugging is enabled and the debug info is added, the request becomes
> of order 1 and memory becomes fragmented.
> 
> A controversial "fix" in which SLUB debugging was disabled for
> allocations where adding such debugging info would increase the order
> was discussed and tried. With a quick look at the commit list for
> Linus's tree, I don't see that such a patch is available, but I will
> be corrected if I missed it.
> 

I'd disagree with disabling slub debugging by default for caches where 
oo_order(s->min) increases as the result of using it.  This particular 
page allocation failure is happening for, presumably, kmalloc-4096, and 
the system has 4K pages.  Disabling debugging for that cache (and any of 
its aliases) implicitly will lead to errors going undiagnosed as a result.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

David Rientjes wrote:
> On Mon, 29 Jun 2009, Larry Finger wrote:
> 
>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
>>> Subject		: Page allocation failures with b43 and p54usb
>>> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
>>> Date		: 2009-04-29 21:01 (61 days old)
>>> References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
>>> 		  http://lkml.org/lkml/2009/6/7/136
>>> Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
>> The cause of these failures has been determined. The wireless
>> subsystem frequently requests buffers of size 4096, but when SLUB
>> debugging is enabled and the debug info is added, the request becomes
>> of order 1 and memory becomes fragmented.
>>
>> A controversial "fix" in which SLUB debugging was disabled for
>> allocations where adding such debugging info would increase the order
>> was discussed and tried. With a quick look at the commit list for
>> Linus's tree, I don't see that such a patch is available, but I will
>> be corrected if I missed it.
>>
> 
> I'd disagree with disabling slub debugging by default for caches where 
> oo_order(s->min) increases as the result of using it.  This particular 
> page allocation failure is happening for, presumably, kmalloc-4096, and 
> the system has 4K pages.  Disabling debugging for that cache (and any of 
> its aliases) implicitly will lead to errors going undiagnosed as a result.

If the current behavior is not changed, I will be forced to disable
SLUB debugging, which will explicitly lead to errors that are
undiagnosed. It seems better to me to debug when you can, but turn off
debugging in cases like this.

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Mon, 29 Jun 2009, Larry Finger wrote:

> > I'd disagree with disabling slub debugging by default for caches where 
> > oo_order(s->min) increases as the result of using it.  This particular 
> > page allocation failure is happening for, presumably, kmalloc-4096, and 
> > the system has 4K pages.  Disabling debugging for that cache (and any of 
> > its aliases) implicitly will lead to errors going undiagnosed as a result.
> 
> If the current behavior is not changed, I will be forced to disable
> SLUB debugging, which will explicitly lead to errors that are
> undiagnosed.

You're buying debugging support at the cost of increased memory 
consumption when you enable CONFIG_SLUB_DEBUG_ON and that's causing the 
page allocation failures because of fragmentation.  To reduce the minimum 
order required for caches such as kmalloc-4096, you'd have to disable 
debugging for that particular cache.  It's my opinion that such a 
configuration should not be the default, however.

You could argue adding `slub_debug=-,kmalloc-4096' support from the 
command line, but CONFIG_SLUB_DEBUG_ON should not change its well-defined 
purpose of enabling debugging on all slab caches.  Otherwise the rest of 
us would be forced to add `slub_debug=,kmalloc-4096' for consistent 
behavior with older kernels.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi David,

On Tue, Jun 30, 2009 at 2:47 AM, David Rientjes<rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> wrote:
> On Mon, 29 Jun 2009, Larry Finger wrote:
>
>> > Bug-Entry   : http://bugzilla.kernel.org/show_bug.cgi?id=13319
>> > Subject             : Page allocation failures with b43 and p54usb
>> > Submitter   : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
>> > Date                : 2009-04-29 21:01 (61 days old)
>> > References  : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
>> >               http://lkml.org/lkml/2009/6/7/136
>> > Handled-By  : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
>>
>> The cause of these failures has been determined. The wireless
>> subsystem frequently requests buffers of size 4096, but when SLUB
>> debugging is enabled and the debug info is added, the request becomes
>> of order 1 and memory becomes fragmented.
>>
>> A controversial "fix" in which SLUB debugging was disabled for
>> allocations where adding such debugging info would increase the order
>> was discussed and tried. With a quick look at the commit list for
>> Linus's tree, I don't see that such a patch is available, but I will
>> be corrected if I missed it.
>>
>
> I'd disagree with disabling slub debugging by default for caches where
> oo_order(s->min) increases as the result of using it.  This particular
> page allocation failure is happening for, presumably, kmalloc-4096, and
> the system has 4K pages.  Disabling debugging for that cache (and any of
> its aliases) implicitly will lead to errors going undiagnosed as a result.

Well, I obviously don't agree here because kmalloc-4096 debugging
causes problems in the real world. Furthermore, SLUB never supported
debugging for objects that big historically because of page allocator
passthrough. And with Mel Gorman's page allocator optimizations, we
might be going back to that.

So we should fix SLUB debugging as outlined by Mel Gorman and
Christoph Lameter. I simply haven't had the time to do it. Patches are
welcome!

                              Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 2316 bytes --]

On Tue, 30 Jun 2009, Pekka Enberg wrote:

> > I'd disagree with disabling slub debugging by default for caches where
> > oo_order(s->min) increases as the result of using it.  This particular
> > page allocation failure is happening for, presumably, kmalloc-4096, and
> > the system has 4K pages.  Disabling debugging for that cache (and any of
> > its aliases) implicitly will lead to errors going undiagnosed as a result.
> 
> Well, I obviously don't agree here because kmalloc-4096 debugging
> causes problems in the real world.

I don't think CONFIG_SLUB_DEBUG_ON is generally the configuration used in 
the real world.

The option has a clear and well-defined purpose and that is to enable 
debugging on all slab caches.  If you modify its definition, users will 
generally ignore the warning about debugging being disabled when "the 
minimum possible order at which slab may be allocated is higher than 
without."  And unless they check the kernel log for such a warning to boot 
with `slab_debug=,kmalloc-4096', we lose testing coverage because we 
cannot enable redzoning or tracing after boot.

> Furthermore, SLUB never supported
> debugging for objects that big historically because of page allocator
> passthrough. And with Mel Gorman's page allocator optimizations, we
> might be going back to that.
> 

Even when page allocation is fast enough, it would still be helpful to 
configure slub to not do passthrough purely for the lightweight debugging 
opportunities.

> So we should fix SLUB debugging as outlined by Mel Gorman and
> Christoph Lameter. I simply haven't had the time to do it. Patches are
> welcome!
> 

You're referring to `slub_debug=A'?  I think CONFIG_SLUB_DEBUG_ON should 
continue to enable debugging on all slab caches and in instances where it 
causes page allocation failures such in Larry's case because 
oo_order(s->min) with debugging on is greater than oo_order(s->min) with 
debugging off, you can emit a friendly warning in your recently added 
slab_out_of_memory() about using `slab_debug=-,<cache>'.

We have a disagreement about which is the default behavior, but I would 
opt on the side of adding exemptions to a debug configuration option as 
opposed to requiring additional command line parameters to be fully 
enabled.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi David,

On Tue, 30 Jun 2009, Pekka Enberg wrote:
>> > I'd disagree with disabling slub debugging by default for caches where
>> > oo_order(s->min) increases as the result of using it.  This particular
>> > page allocation failure is happening for, presumably, kmalloc-4096, and
>> > the system has 4K pages.  Disabling debugging for that cache (and any of
>> > its aliases) implicitly will lead to errors going undiagnosed as a result.
>>
>> Well, I obviously don't agree here because kmalloc-4096 debugging
>> causes problems in the real world.

On Tue, Jun 30, 2009 at 10:47 AM, David Rientjes<rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> wrote:
> I don't think CONFIG_SLUB_DEBUG_ON is generally the configuration used in
> the real world.

It is, hence the epic bug report that's eaten too many man hours
already! Look, we encourage _testers_ to turn all as much as debugging
options as possible so we catch bugs early. That why the only sane
defaults are the ones that don't cause other problems!

I don't know why you want to argue this. It's simply not an option to
say "stupid user, fix your config" in core code like the slab
allocator. Enabling CONFIG_SLUB_DEBUG_ON is a very reasonable thing to
do when you are a tester looking for bugs.

On Tue, 30 Jun 2009, Pekka Enberg wrote:
>> So we should fix SLUB debugging as outlined by Mel Gorman and
>> Christoph Lameter. I simply haven't had the time to do it. Patches are
>> welcome!

On Tue, Jun 30, 2009 at 10:47 AM, David Rientjes<rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> wrote:
> You're referring to `slub_debug=A'?  I think CONFIG_SLUB_DEBUG_ON should
> continue to enable debugging on all slab caches and in instances where it
> causes page allocation failures such in Larry's case because
> oo_order(s->min) with debugging on is greater than oo_order(s->min) with
> debugging off, you can emit a friendly warning in your recently added
> slab_out_of_memory() about using `slab_debug=-,<cache>'.
>
> We have a disagreement about which is the default behavior, but I would
> opt on the side of adding exemptions to a debug configuration option as
> opposed to requiring additional command line parameters to be fully
> enabled.

Yup, I was referring to slub_debug=A and no, I don't agree with you
that it should be on by default. Only people who know what they're
doing should enable the option and a random tester by definition
doesn't (no offence to Mr. Random Tester).

                                                   Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Pekka Enberg wrote:
> 
> Yup, I was referring to slub_debug=A and no, I don't agree with you
> that it should be on by default. Only people who know what they're
> doing should enable the option and a random tester by definition
> doesn't (no offence to Mr. Random Tester).

None taken.

For me, the next step is clear. As I'm much more interested in finding
bugs in the wireless system than in the mechanics of SLUB allocation,
I need to disable CONFIG_SLUB_DEBUG_ON. BTW, I use SLAB on Linus's
mainline tree and SLUB on the wireless testing tree. I build and boot
the mainline kernels mostly to look for quick failures/regressions,
but run the w-t kernels looking for longer-term effects such as memory
fragmentation or slow memory leaks.

For Rafael's benefit, we do need to decide if this is a bug or merely
an unintended side effect. My sense is the latter and Bug #13319
should have a summary of this discussion added to the record, and then
the bug should be closed.

Larry

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Tue, 30 Jun 2009, Pekka Enberg wrote:

> On Tue, Jun 30, 2009 at 10:47 AM, David Rientjes<rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> wrote:
> > I don't think CONFIG_SLUB_DEBUG_ON is generally the configuration used in
> > the real world.
> 
> It is, hence the epic bug report that's eaten too many man hours
> already! Look, we encourage _testers_ to turn all as much as debugging
> options as possible so we catch bugs early. That why the only sane
> defaults are the ones that don't cause other problems!
> 

I feel that asking a user to add a command line parameter such as 
`slub_debug=A' in addition to CONFIG_SLUB_DEBUG_ON will likely lead to 
less testing coverage and bugs going unreported.  CONFIG_SLUB_DEBUG_ON is 
not something that a distro is going to enable or would be used in a 
production environment, it's something that's used to debug slub and/or 
slab allocations either during the development of new kernel code or when 
an underlying problem is realized.

> I don't know why you want to argue this. It's simply not an option to
> say "stupid user, fix your config" in core code like the slab
> allocator. Enabling CONFIG_SLUB_DEBUG_ON is a very reasonable thing to
> do when you are a tester looking for bugs.
> 

Quite the contrary, I agree completely with the above, and that's why I'm 
arguing for full debugging to be enabled when a well-defined configuration 
option is enabled.  I simply don't believe that such debugging should be 
coupled with a command line option to be fully activated for all caches.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Tue, 30 Jun 2009, Pekka Enberg wrote:

> Well, I obviously don't agree here because kmalloc-4096 debugging causes
> problems in the real world. Furthermore, SLUB never supported debugging
> for objects that big historically because of page allocator passthrough.
> And with Mel Gorman's page allocator optimizations, we might be going
> back to that.

SLUB for some period of time had passthrough. It did not start out like
that though.

kmalloc-4096 causes problems in the long run and so do other caches that
are of similar size. But it allows debugging to occur. Silently switching
it off is something I am not comfortable with.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

On Tue, 2009-06-30 at 10:32 -0400, Christoph Lameter wrote:
> kmalloc-4096 causes problems in the long run and so do other caches that
> are of similar size. But it allows debugging to occur. Silently switching
> it off is something I am not comfortable with.

I suggested adding a

  printk(KERN_INFO ": debugging disabled for %s. Use slub_debug=a to "
                    "enable it blah blah blah\n");

Does that work for you?

			Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Tue, 30 Jun 2009, Pekka Enberg wrote:

>   printk(KERN_INFO ": debugging disabled for %s. Use slub_debug=a to "
>                     "enable it blah blah blah\n");
>
> Does that work for you?

Its definitely better.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Tue, 30 Jun 2009, Christoph Lameter wrote:

> >   printk(KERN_INFO ": debugging disabled for %s. Use slub_debug=a to "
> >                     "enable it blah blah blah\n");
> >
> > Does that work for you?
> 
> Its definitely better.
> 

I don't see how that's different from enabling debugging on all caches 
like CONFIG_SLAB_DEBUG_ON currently does and then warning at the time of 
slab allocation failure that it may be the result of the debugging 
metadata so the user can subsequently prevent it.  In other words, if we 
use MAX_DEBUG_SIZE as Pekka originally implemented as
(3 * sizeof(void *) + 2 * sizeof(struct track)), do this:

diff --git a/mm/slub.c b/mm/slub.c
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -142,6 +142,11 @@
 				SLAB_POISON | SLAB_STORE_USER)
 
 /*
+ * The maximum amount of metadata added to a slab when debugging is enabled.
+ */
+#define MAX_DEBUG_SIZE (3 * sizeof(void *) + 2 * sizeof(struct track))
+
+/*
  * Set of flags that will prevent slab merging
  */
 #define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
@@ -1561,6 +1566,21 @@ slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid)
 		"default order: %d, min order: %d\n", s->name, s->objsize,
 		s->size, oo_order(s->oo), oo_order(s->min));
 
+	if (s->flags & (SLAB_POISON | SLAB_RED_ZONE | SLAB_STORE_USER)) {
+		int min_order;
+
+		/*
+		 * Debugging is enabled, which may increase oo_order(s->min), so
+		 * warn the user that allocation failures may be avoided if
+		 * debugging is enabled for this cache.
+		 */
+		min_order = get_order(s->size - MAX_DEBUG_SIZE);
+		if (min_order < oo_order(s->min))
+			printk(KERN_WARNING "  %s debugging increased min order "
+			       "from %d to %d, use slab_debug=-,%s to disable.",
+			       s->name, min_order, oo_order(s->min), s->name);
+	}
+
 	for_each_online_node(node) {
 		struct kmem_cache_node *n = get_node(s, node);
 		unsigned long nr_slabs;

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Tue, 30 Jun 2009, David Rientjes wrote:

> I don't see how that's different from enabling debugging on all caches
> like CONFIG_SLAB_DEBUG_ON currently does and then warning at the time of
> slab allocation failure that it may be the result of the debugging
> metadata so the user can subsequently prevent it.  In other words, if we
> use MAX_DEBUG_SIZE as Pekka originally implemented as
> (3 * sizeof(void *) + 2 * sizeof(struct track)), do this:

I like it.

> diff --git a/mm/slub.c b/mm/slub.c
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -142,6 +142,11 @@
>  				SLAB_POISON | SLAB_STORE_USER)
>
>  /*
> + * The maximum amount of metadata added to a slab when debugging is enabled.
> + */
> +#define MAX_DEBUG_SIZE (3 * sizeof(void *) + 2 * sizeof(struct track))
> +
> +/*
>   * Set of flags that will prevent slab merging
>   */
>  #define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
> @@ -1561,6 +1566,21 @@ slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid)
>  		"default order: %d, min order: %d\n", s->name, s->objsize,
>  		s->size, oo_order(s->oo), oo_order(s->min));
>
> +	if (s->flags & (SLAB_POISON | SLAB_RED_ZONE | SLAB_STORE_USER)) {
> +		int min_order;
> +
> +		/*
> +		 * Debugging is enabled, which may increase oo_order(s->min), so
> +		 * warn the user that allocation failures may be avoided if
> +		 * debugging is enabled for this cache.
> +		 */
> +		min_order = get_order(s->size - MAX_DEBUG_SIZE);
> +		if (min_order < oo_order(s->min))
> +			printk(KERN_WARNING "  %s debugging increased min order "
> +			       "from %d to %d, use slab_debug=-,%s to disable.",
> +			       s->name, min_order, oo_order(s->min), s->name);

It may be easier to check the order of the initial size vs. the order of
the size with all metadata

if (get_order(s->size) > get_order(s->objsize)

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Tue, 30 Jun 2009, Christoph Lameter wrote:

> > diff --git a/mm/slub.c b/mm/slub.c
> > --- a/mm/slub.c
> > +++ b/mm/slub.c
> > @@ -142,6 +142,11 @@
> >  				SLAB_POISON | SLAB_STORE_USER)
> >
> >  /*
> > + * The maximum amount of metadata added to a slab when debugging is enabled.
> > + */
> > +#define MAX_DEBUG_SIZE (3 * sizeof(void *) + 2 * sizeof(struct track))
> > +
> > +/*
> >   * Set of flags that will prevent slab merging
> >   */
> >  #define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
> > @@ -1561,6 +1566,21 @@ slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid)
> >  		"default order: %d, min order: %d\n", s->name, s->objsize,
> >  		s->size, oo_order(s->oo), oo_order(s->min));
> >
> > +	if (s->flags & (SLAB_POISON | SLAB_RED_ZONE | SLAB_STORE_USER)) {
> > +		int min_order;
> > +
> > +		/*
> > +		 * Debugging is enabled, which may increase oo_order(s->min), so
> > +		 * warn the user that allocation failures may be avoided if
> > +		 * debugging is enabled for this cache.
> > +		 */
> > +		min_order = get_order(s->size - MAX_DEBUG_SIZE);
> > +		if (min_order < oo_order(s->min))
> > +			printk(KERN_WARNING "  %s debugging increased min order "
> > +			       "from %d to %d, use slab_debug=-,%s to disable.",
> > +			       s->name, min_order, oo_order(s->min), s->name);
> 
> It may be easier to check the order of the initial size vs. the order of
> the size with all metadata
> 
> if (get_order(s->size) > get_order(s->objsize)
> 

Ah, right.  Then we could simply eliminate the check on s->flags to begin 
with.

This patch is supposing that `slab_debug=-,<cache>' actually disables all 
debugging for <cache> which would need to be implemented first, but I 
think this is a better alternative than requiring slab_debug=A for full 
debugging after enabling CONFIG_SLUB_DEBUG_ON.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Tue, 30 Jun 2009, David Rientjes wrote:

> This patch is supposing that `slab_debug=-,<cache>' actually disables all
> debugging for <cache> which would need to be implemented first, but I
> think this is a better alternative than requiring slab_debug=A for full
> debugging after enabling CONFIG_SLUB_DEBUG_ON.

We could add an option that disables debugging for troublesome page
size slabs


slab_debug=p

or so

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Tue, 30 Jun 2009, Christoph Lameter wrote:

> We could add an option that disables debugging for troublesome page
> size slabs
> 
> 
> slab_debug=p
> 
> or so
> 

I definitely like that more than slab_debug=A, where we're requiring an 
added parameter for full debugging to be activated.

I'm curious whether there would ever be any use for disabling debugging on 
specific caches for reasons other than higher minimum orders for metadata, 
though, given that we already support things like slub_debug=FZ,cache, 
which should only enable free debugging and redzoning even with 
CONFIG_SLUB_DEBUG_ON enabled for cache.

I think the solution to this is really based on good software engineering 
and test practices, though, so hopefully there'll be a consensus on which 
direction to take before any time is spent in implementing and pushing it.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Christoph Lameter]

On Tue, 30 Jun 2009, David Rientjes wrote:

> I'm curious whether there would ever be any use for disabling debugging on
> specific caches for reasons other than higher minimum orders for metadata,
> though, given that we already support things like slub_debug=FZ,cache,
> which should only enable free debugging and redzoning even with
> CONFIG_SLUB_DEBUG_ON enabled for cache.

One of the reasons for disabling debugging is to speed up the kernel. Race
conditions may vanish due to the additional latency added by the debugging
code. Ideally you know which slab cache has the race and you only would
enable it on that one.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi David,

On Wed, Jul 1, 2009 at 12:52 AM, David Rientjes<rientjes@google.com> wrote:
> I think the solution to this is really based on good software engineering
> and test practices, though, so hopefully there'll be a consensus on which
> direction to take before any time is spent in implementing and pushing it.

Lets go with the slab_out_of_memory() patch you outlined in a previous
post and implement the slub_debug=p thing Christoph suggested. I think
it's the best compromise at this point. When you guys finally see the
light, we can always change it to a reasonable default. ;)

So can you send a patch, please?

                        Pekka

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[David Rientjes]

On Wed, 1 Jul 2009, Pekka Enberg wrote:

> Lets go with the slab_out_of_memory() patch you outlined in a previous
> post and implement the slub_debug=p thing Christoph suggested. I think
> it's the best compromise at this point. When you guys finally see the
> light, we can always change it to a reasonable default. ;)
> 
> So can you send a patch, please?
> 

Sure, let me know if you think this is -rc material; otherwise, the bug 
will have to be deferred until 2.6.32 with the temporary workaround of 
disabling CONFIG_SLUB_DEBUG_ON.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi David,

On Wed, 1 Jul 2009, Pekka Enberg wrote:
>> Lets go with the slab_out_of_memory() patch you outlined in a previous
>> post and implement the slub_debug=p thing Christoph suggested. I think
>> it's the best compromise at this point. When you guys finally see the
>> light, we can always change it to a reasonable default. ;)
>>
>> So can you send a patch, please?

On Thu, Jul 2, 2009 at 8:18 PM, David Rientjes<rientjes-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org> wrote:
> Sure, let me know if you think this is -rc material; otherwise, the bug
> will have to be deferred until 2.6.32 with the temporary workaround of
> disabling CONFIG_SLUB_DEBUG_ON.

We're at -rc2 so yes, I do think we should fix 2.6.31.

2.6.30-rc7-git4: Reported regressions from 2.6.29

[Rafael J. Wysocki]

This message contains a list of some regressions from 2.6.29, for which there
are no fixes in the mainline I know of.  If any of them have been fixed already,
please let me know.

If you know of any other unresolved regressions from 2.6.29, please let me know
either and I'll add them to the list.  Also, please let me know if any of the
entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-05-31      100       32          27
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13408
Subject		: Performance regression in 2.6.30-rc7
Submitter	: Diego Calleja <diegocg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-30 18:51 (1 days old)
References	: http://lkml.org/lkml/2009/5/30/146


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13407
Subject		: adb trackpad disappears after suspend to ram
Submitter	: Jan Scholz <scholz-wOpdxP1gw6Cc+IqHO83+wjjhTm2NLCe8@public.gmane.org>
Date		: 2009-05-28 7:59 (3 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2ed8d2b3a81bdbb0418301628ccdb008ac9f40b7
References	: http://marc.info/?l=linux-kernel&m=124349762314976&w=4
Handled-By	: Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13401
Subject		: pktcdvd writing is really slow with CFQ scheduler (bisected)
Submitter	: Laurent Riffard <laurent.riffard-GANU6spQydw@public.gmane.org>
Date		: 2009-05-28 18:43 (3 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13391
Subject		: Kernel boot hangs at about every second start when kms is activated
Submitter	: Martin Bammer <mrb74-RbZlAiThDcE@public.gmane.org>
Date		: 2009-05-26 21:47 (5 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13389
Subject		: Warning 'Invalid throttling state, reset' gets displayed when it should not be
Submitter	: Frans Pop <elendil-EIBgga6/0yRmR6Xm/wNWPw@public.gmane.org>
Date		: 2009-05-26 15:24 (5 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13377
Subject		: Microphone no longer works on Toshiba Satellite A100
Submitter	: M. Vefa Bicakci <bicave-qUEp0r/b3FNfOZc0+OmrVg@public.gmane.org>
Date		: 2009-05-24 15:49 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=23f0c048ba59ad5c2f3fd85ed98360b631dbf6f8
References	: http://marc.info/?l=linux-kernel&m=124318383910011&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel-zqRNUXuvxA0b1SvskN2V4Q@public.gmane.org>
Date		: 2009-05-23 8:52 (8 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-23 5:08 (8 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13366
Subject		: About 80% of shutdowns fail (blocking)
Submitter	: Martin Bammer <mrb74-RbZlAiThDcE@public.gmane.org>
Date		: 2009-05-23 00:58 (8 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13362
Subject		: [mac80211 ] Wifi Network Slownes Bisected
Submitter	: Alejandro Riveira <ariveira-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-22 13:32 (9 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13351
Subject		: 2.6.30 corrupts my system after suspend resume with readonly mounted hard disk
Submitter	:  <unggnu-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Date		: 2009-05-20 14:09 (11 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742
Handled-By	: Yinghai Lu <yinghai-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick-nxAOmsU53hB6lmGzAMPh1A@public.gmane.org>
Date		: 2009-05-19 09:08 (12 days old)
Handled-By	: Rusty Russell <rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13337
Subject		: [post 2.6.29 regression] hang during suspend of b44/b43 modules
Submitter	: Tomas Janousek <tomi-YoqI/XImC7s@public.gmane.org>
Date		: 2009-05-18 10:59 (13 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13330
Subject		: nfs4 NULL pointer dereference in _nfs4_do_setlk
Submitter	: Rich Ercolani <rercola-YxllIAoeIHiVc3sceRu5cw@public.gmane.org>
Date		: 2009-05-17 04:44 (14 days old)
Handled-By	: Trond Myklebust <trond.myklebust-41N18TsMXrtuMpJDpNschA@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-03 16:22 (28 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13325
Subject		: 2.6.30-rc kills my box hard - and lockdep chains
Submitter	: Jonathan Corbet <corbet-T1hC0tSOHrs@public.gmane.org>
Date		: 2009-05-14 15:49 (17 days old)
References	: http://marc.info/?l=linux-kernel&m=124231630701394&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (32 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime-Mmb7MZpHnFY@public.gmane.org>
Date		: 2009-04-30 8:51 (31 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13313
Subject		: vm86old oops
Submitter	: Sergey Senozhatsky <sergey.senozhatsky-A/MS7pq9VAU@public.gmane.org>
Date		: 2009-05-14 21:53 (17 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13310
Subject		: REGRESSION 2.6.30-rc1: oprofile panics system when started
Submitter	: Jesse Brandeburg <jesse.brandeburg-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-14 17:51 (17 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
Date		: 2009-05-14 09:34 (17 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13277
Subject		: 2.6.30 regression - unreliable resume - bisected - Thinkpad X40
Submitter	: Daniel Vetter <daniel-/w4YWyX8dFk@public.gmane.org>
Date		: 2009-05-11 10:08 (20 days old)
Handled-By	: Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Since kernel 2.6.30-rc1, computers hangs randomly ..
Submitter	: David Hill <hilld-HTiBYHdybX7UkGsOFmftXw@public.gmane.org>
Date		: 2009-05-01 16:57 (30 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-21 21:35 (40 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13179
Subject		: CD-R: wodim intermittent failures
Submitter	: Andy Isaacson <adi-3HqRAUrWAWyGglJvpFV4uA@public.gmane.org>
Date		: 2009-04-21 1:52 (40 days old)
References	: http://marc.info/?l=linux-kernel&m=124027879214231&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13119
Subject		: Trouble with make-install from a NFS mount
Submitter	: Gregory Haskins <ghaskins-Et1tbQHTxzrQT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-14 21:32 (47 days old)
References	: http://marc.info/?l=linux-kernel&m=123974482327044&w=4
Handled-By	: H. Peter Anvin <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13116
Subject		: Can't boot with nosmp
Submitter	: Stephen Hemminger <shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-15 4:18 (46 days old)
References	: http://marc.info/?l=linux-kernel&m=123976917817920&w=4
Handled-By	: Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13406
Subject		: Kernel does not compile when set to use i915 kernel mode-setting per default
Submitter	: Woody Suwalski <woodys-PRTm14v61u5BDgjK7y7TUQ@public.gmane.org>
Date		: 2009-05-20 19:30 (11 days old)
References	: http://marc.info/?l=linux-acpi&m=124284975803785&w=4
Handled-By	: Len Brown <lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/27026/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13378
Subject		: kernel/async.c broke pata_legacy.c
Submitter	: Mikael Pettersson <mikpe-1zs4UD6AkMk@public.gmane.org>
Date		: 2009-05-24 16:13 (7 days old)
References	: http://marc.info/?l=linux-kernel&m=124318186507210&w=4
Handled-By	: James Bottomley <James.Bottomley-JuX6DAaQMKPCXq6kfMZ53/egYHeGw8Jk@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/25699/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13372
Subject		: Oops in usb-serial with keyspan adapter
Submitter	: Benjamin Herrenschmidt <benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Date		: 2009-05-18 0:07 (13 days old)
References	: http://marc.info/?l=linux-kernel&m=124260532924736&w=4
Handled-By	: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/26603/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13121
Subject		: Buggy _BCM - acer aspire 5720G, 5710Z, 5315
Submitter	: Maxim Levitsky <maximlevitsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-16 11:37 (45 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1a7c618a3f7bef1a20ae740df512eeba21397fa5
References	: http://marc.info/?l=linux-kernel&m=123988189401913&w=4
Handled-By	: Zhang Rui <rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Patch		: http://patchwork.kernel.org/patch/19755/
		  http://bugzilla.kernel.org/attachment.cgi?id=21268


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-11 14:56 (50 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
		  Alexey Starikovskiy <astarikovskiy-l3A5Bk7waGM@public.gmane.org>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21061
		  http://bugzilla.kernel.org/attachment.cgi?id=21282


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.29,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (32 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

2.6.30-rc7: Reported regressions from 2.6.29

[Rafael J. Wysocki]

[NOTE:
 Bug entries for which I know there are working patches get the
 RESOLVED / PATCH_ALREADY_AVAILABLE status in the Bugzilla, which
 makes it easier to check if the patches have been merged before sending
 out the list.  For this reason, please let me know of working patches
 for any of the regression list items or (better) change the status of the bug
 entries in case you know of a working patch (in which case please also add
 a link to the patch to the appropriate bug entry).]

This message contains a list of some regressions from 2.6.29, for which there
are no fixes in the mainline I know of.  If any of them have been fixed already,
please let me know.

If you know of any other unresolved regressions from 2.6.29, please let me know
either and I'll add them to the list.  Also, please let me know if any of the
entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-05-24       92       34          27
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13377
Subject		: Microphone no longer works on Toshiba Satellite A100
Submitter	: M. Vefa Bicakci <bicave@superonline.com>
Date		: 2009-05-24 15:49 (1 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=23f0c048ba59ad5c2f3fd85ed98360b631dbf6f8
References	: http://marc.info/?l=linux-kernel&m=124318383910011&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13374
Subject		: reiserfs blocked for more than 120secs
Submitter	: Harald Dunkel <harald.dunkel@t-online.de>
Date		: 2009-05-23 8:52 (2 days old)
References	: http://marc.info/?l=linux-kernel&m=124306880410811&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13373
Subject		: fbcon, intelfb, i915: INFO: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2009-05-23 5:08 (2 days old)
References	: http://marc.info/?l=linux-kernel&m=124305538130702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13372
Subject		: Oops in usb-serial with keyspan adapter
Submitter	: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date		: 2009-05-18 0:07 (7 days old)
References	: http://marc.info/?l=linux-kernel&m=124260532924736&w=4
Handled-By	: Alan Stern <stern@rowland.harvard.edu>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13366
Subject		: About 80% of shutdowns fail (blocking)
Submitter	: Martin Bammer <mrb74@gmx.at>
Date		: 2009-05-23 00:58 (2 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13341
Subject		: Random Oops at boot at loading ip6tables rules
Submitter	:  <patrick@ostenberg.de>
Date		: 2009-05-19 09:08 (6 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13339
Subject		: rtable leak in ipv4/route.c
Submitter	: Alexander V. Lukyanov <lav@yar.ru>
Date		: 2009-05-18 14:10 (7 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13337
Subject		: [post 2.6.29 regression] hang during suspend of b44/b43 modules
Submitter	: Tomas Janousek <tomi@nomi.cz>
Date		: 2009-05-18 10:59 (7 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13331
Subject		: FUTEX_LOCK_PI kills kernel
Submitter	: Andreas Schwab <schwab@linux-m68k.org>
Date		: 2009-05-17 09:51 (8 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13330
Subject		: nfs4 NULL pointer dereference in _nfs4_do_setlk
Submitter	: Rich Ercolani <rercola@acm.jhu.edu>
Date		: 2009-05-17 04:44 (8 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro@gmail.com>
Date		: 2009-05-03 16:22 (22 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13326
Subject		: [PATCH]Null pointer dereference in rtc-cmos driver
Submitter	: Ozan Çağlayan <ozan@pardus.org.tr>
Date		: 2009-05-14 16:16 (11 days old)
References	: http://marc.info/?l=linux-kernel&m=124231783704696&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13325
Subject		: 2.6.30-rc kills my box hard - and lockdep chains
Submitter	: Jonathan Corbet <corbet@lwn.net>
Date		: 2009-05-14 15:49 (11 days old)
References	: http://marc.info/?l=linux-kernel&m=124231630701394&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13323
Subject		: 2.6.30-rc deadline scheduler performance regression for iozone over NFS
Submitter	: Jeff Moyer <jmoyer@redhat.com>
Date		: 2009-04-23 14:01 (32 days old)
References	: http://marc.info/?l=linux-kernel&m=124049547915450&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2009-04-29 21:01 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
Handled-By	: Johannes Berg <johannes@sipsolutions.net>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime@gmx.de>
Date		: 2009-04-30 8:51 (25 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes@sipsolutions.net>
Date		: 2009-05-14 09:34 (11 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13285
Subject		: INTELFB: Colors display incorrectly
Submitter	: Dean Menezes <samanddeanus@yahoo.com>
Date		: 2009-05-12 01:40 (13 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13250
Subject		: Side channel of Intel HDA chip doesn't work anymore, did work with 2.6.29
Submitter	: Andreas Juch <kernel-bt@juch.cc>
Date		: 2009-05-05 10:14 (20 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13219
Subject		: Since kernel 2.6.30-rc1, computers hangs randomly ..
Submitter	: David Hill <hilld@binarystorm.net>
Date		: 2009-05-01 16:57 (24 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts@gmail.com>
Date		: 2009-04-21 21:35 (34 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13179
Subject		: CD-R: wodim intermittent failures
Submitter	: Andy Isaacson <adi@hexapodia.org>
Date		: 2009-04-21 1:52 (34 days old)
References	: http://marc.info/?l=linux-kernel&m=124027879214231&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13171
Subject		: 2.6.30-rc2 + xorg-intel-2.7.0 + DRM_I915_KMS = corruption
Submitter	: Alex Bennee <kernel-hacker@bennee.com>
Date		: 2009-04-19 6:27 (36 days old)
References	: http://marc.info/?l=linux-kernel&m=124022460014812&w=4
		  https://bugs.freedesktop.org/show_bug.cgi?id=21480


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13148
Subject		: resume after suspend-to-ram broken on Sony Vaio VGN-SR19VN when sony-laptop driver present
Submitter	: fanderay <fanderay4@googlemail.com>
Date		: 2009-04-22 14:39 (33 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13126
Subject		: BUG: MAX_LOCKDEP_ENTRIES too low! when mounting rootfs
Submitter	: Alexander Beregalov <a.beregalov@gmail.com>
Date		: 2009-04-15 12:43 (40 days old)
References	: http://marc.info/?l=linux-kernel&m=123979949820538&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13119
Subject		: Trouble with make-install from a NFS mount
Submitter	: Gregory Haskins <ghaskins@novell.com>
Date		: 2009-04-14 21:32 (41 days old)
References	: http://marc.info/?l=linux-kernel&m=123974482327044&w=4
Handled-By	: H. Peter Anvin <hpa@zytor.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13116
Subject		: Can't boot with nosmp
Submitter	: Stephen Hemminger <shemminger@vyatta.com>
Date		: 2009-04-15 4:18 (40 days old)
References	: http://marc.info/?l=linux-kernel&m=123976917817920&w=4
Handled-By	: Dan Williams <dan.j.williams@intel.com>


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13378
Subject		: kernel/async.c broke pata_legacy.c
Submitter	: Mikael Pettersson <mikpe@it.uu.se>
Date		: 2009-05-24 16:13 (1 days old)
References	: http://marc.info/?l=linux-kernel&m=124318186507210&w=4
Handled-By	: James Bottomley <James.Bottomley@hansenpartnership.com>
Patch		: http://patchwork.kernel.org/patch/25699/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13293
Subject		: Kernel BUG under network load with gianfar
Submitter	: Michael Guntsche <mike@it-loops.com>
Date		: 2009-05-03 13:36 (22 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0fd56bb5be6455d0d42241e65aed057244665e5e
References	: http://marc.info/?l=linux-kernel&m=124135824600924&w=4
Handled-By	: Lennert Buytenhek <buytenh@wantstofly.org>
Patch		: http://patchwork.kernel.org/patch/25518/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13277
Subject		: Thinkpad X40 no longer resumes reliable since ff69f2bba67bd45514923aaedbf40fe351787c59
Submitter	: Daniel Vetter <daniel@ffwll.ch>
Date		: 2009-05-11 10:08 (14 days old)
Handled-By	: Len Brown <len.brown@intel.com>
Patch		: http://patchwork.kernel.org/patch/22499/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13245
Subject		: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2009-05-04 16:56 (21 days old)
Handled-By	: Rafael J. Wysocki <rjw@sisk.pl>
Patch		: http://patchwork.kernel.org/patch/25557/


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject		: active uvcvideo breaks over suspend
Submitter	: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date		: 2009-04-15 10:12 (40 days old)
References	: http://marc.info/?l=linux-kernel&m=123979009508840&w=4
Handled-By	: Ming Lei <tom.leiming@gmail.com>
Patch		: http://lkml.org/lkml/2009/4/18/5


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13121
Subject		: Buggy _BCM - acer aspire 5720G, 5710Z, 5315
Submitter	: Maxim Levitsky <maximlevitsky@gmail.com>
Date		: 2009-04-16 11:37 (39 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1a7c618a3f7bef1a20ae740df512eeba21397fa5
References	: http://marc.info/?l=linux-kernel&m=123988189401913&w=4
Handled-By	: Zhang Rui <rui.zhang@intel.com>
Patch		: http://patchwork.kernel.org/patch/19755/
		  http://bugzilla.kernel.org/attachment.cgi?id=21268


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista@gmail.com>
Date		: 2009-04-11 14:56 (44 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang@intel.com>
		  Alexey Starikovskiy <astarikovskiy@suse.de>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21061
		  http://bugzilla.kernel.org/attachment.cgi?id=21282


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.29,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

2.6.30-rc6: Reported regressions from 2.6.29

[Rafael J. Wysocki]

This message contains a list of some regressions from 2.6.29, for which there
are no fixes in the mainline I know of.  If any of them have been fixed already,
please let me know.

If you know of any other unresolved regressions from 2.6.29, please let me know
either and I'll add them to the list.  Also, please let me know if any of the
entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2009-05-16       81       36          33
  2009-04-25       55       36          26
  2009-04-17       37       35          28



Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13329
Subject		: cifs_close: NULL pointer dereference
Submitter	: Luca Tettamanti <kronos.it-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-16 16:28 (1 days old)
References	: http://marc.info/?l=linux-kernel&m=124249133701702&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13328
Subject		: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
Submitter	: Francis Moreau <francis.moro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-03 16:22 (14 days old)
References	: http://marc.info/?l=linux-kernel&m=124136778012280&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13327
Subject		: Regression: 2.6.30-rc5 and rt2x00 / rt2500pci
Submitter	: Ken Lewis <kennylewis-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-15 14:40 (2 days old)
References	: http://marc.info/?l=linux-kernel&m=124239988223614&w=4
Handled-By	: John W. Linville <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13326
Subject		: Null pointer dereference in rtc-cmos driver
Submitter	: Ozan Çağlayan <ozan-caicS1wCkhO6A22drWdTBw@public.gmane.org>
Date		: 2009-05-14 16:16 (3 days old)
References	: http://marc.info/?l=linux-kernel&m=124231783704696&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13325
Subject		: 2.6.30-rc kills my box hard - and lockdep chains
Submitter	: Jonathan Corbet <corbet-T1hC0tSOHrs@public.gmane.org>
Date		: 2009-05-14 15:49 (3 days old)
References	: http://marc.info/?l=linux-kernel&m=124231630701394&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13324
Subject		: panic when loading oprofile
Submitter	: Brandeburg, Jesse <jesse.brandeburg-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-13 22:30 (4 days old)
References	: http://marc.info/?l=linux-kernel&m=124225384311631&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13323
Subject		: 2.6.30-rc deadline scheduler performance regression for iozone over NFS
Submitter	: Jeff Moyer <jmoyer-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-23 14:01 (24 days old)
References	: http://marc.info/?l=linux-kernel&m=124049547915450&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13321
Subject		: kernel crash with NULL pointer when boot
Submitter	: Martin Bammer <mrb74-RbZlAiThDcE@public.gmane.org>
Date		: 2009-05-16 12:37 (1 days old)
References	: http://lkml.org/lkml/2009/5/16/100


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (18 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13318
Subject		: AGP doesn't work anymore on nforce2
Submitter	: Karsten Mehrhoff <kawime-Mmb7MZpHnFY@public.gmane.org>
Date		: 2009-04-30 8:51 (17 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59de2bebabc5027f93df999d59cc65df591c3e6e
References	: http://marc.info/?l=linux-kernel&m=124108156417560&w=4
Handled-By	: Shaohua Li <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13306
Subject		: hibernate slow on _second_ run
Submitter	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
Date		: 2009-05-14 09:34 (3 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13298
Subject		: modprobe ipmi_si hangs under 2.6.30-rc5
Submitter	: Ferenc Wagner <wferi-eEbw3PyuezQ@public.gmane.org>
Date		: 2009-05-12 21:28 (5 days old)
References	: http://marc.info/?l=linux-kernel&m=124216379407177&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13297
Subject		: kernel panic -  not syncing : fatel exception in interupt
Submitter	: rob <rob1-z2Ut7v/pTR/vt0rt8C/ehw@public.gmane.org>
Date		: 2009-05-12 19:34 (5 days old)
References	: http://marc.info/?l=linux-kernel&m=124216126903309&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13296
Subject		: Lockdep violation at cleanup_workqueue_thread during suspend
Submitter	: Zdenek Kabelac <zdenek.kabelac-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-12 7:59 (5 days old)
References	: http://marc.info/?l=linux-kernel&m=124211522525625&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13294
Subject		: i915: drm: xorg leaks drm objects massively
Submitter	: Sergei Trofimovich <slyich-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-10 19:56 (7 days old)
References	: http://marc.info/?l=linux-kernel&m=124198547027903&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13293
Subject		: Kernel BUG under network load with gianfar
Submitter	: Michael Guntsche <mike-Z92qn3yYq0hWk0Htik3J/w@public.gmane.org>
Date		: 2009-05-03 13:36 (14 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0fd56bb5be6455d0d42241e65aed057244665e5e
References	: http://marc.info/?l=linux-kernel&m=124135824600924&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13285
Subject		: INTELFB: Colors display incorrectly
Submitter	: Dean Menezes <samanddeanus-/E1597aS9LQAvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-12 01:40 (5 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13250
Subject		: Side channel of Intel HDA chip doesn't work anymore, did work with 2.6.29
Submitter	: Andreas Juch <kernel-bt-Sk8biX5uX1I@public.gmane.org>
Date		: 2009-05-05 10:14 (12 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13245
Subject		: possible circular locking dependency detected
Submitter	: Miles Lane <miles.lane-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-05-04 16:56 (13 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13188
Subject		: horizontal strips of the screen frozen
Submitter	: Justin Madru <jdm64-u1xxEuL7cY4AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-24 20:59 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=280b713b5b0fd84cf2469098aee88acbb5de859c
References	: http://marc.info/?l=linux-kernel&m=124060685315937&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13180
Subject		: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Submitter	: Niel Lambrechts <niel.lambrechts-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-21 21:35 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=124034980819102&w=4
		  http://lkml.org/lkml/2009/4/27/290


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13179
Subject		: CD-R: wodim intermittent failures
Submitter	: Andy Isaacson <adi-3HqRAUrWAWyGglJvpFV4uA@public.gmane.org>
Date		: 2009-04-21 1:52 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=124027879214231&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13177
Subject		: 2.6.30-rc2-git7 build problem
Submitter	: Martin Knoblauch <spamtrap-Ys4E+72pFW0hFhg+JK9F0w@public.gmane.org>
Date		: 2009-04-21 13:39 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=124032163602132&w=4
		  http://lkml.org/lkml/2009/4/27/56


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13171
Subject		: 2.6.30-rc2 + xorg-intel-2.7.0 + DRM_I915_KMS = corruption
Submitter	: Alex Bennee <kernel-hacker-jriKODhXDevQT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-19 6:27 (28 days old)
References	: http://marc.info/?l=linux-kernel&m=124022460014812&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13156
Subject		: keyboard backlight brightness up/down keys doesn't work
Submitter	: Thomas Meyer <thomas-VsYtu1Qij5c@public.gmane.org>
Date		: 2009-04-23 20:46 (24 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13148
Subject		: resume after suspend-to-ram broken on Sony Vaio VGN-SR19VN when sony-laptop driver present
Submitter	: fanderay <fanderay4-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Date		: 2009-04-22 14:39 (25 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13126
Subject		: BUG: MAX_LOCKDEP_ENTRIES too low! when mounting rootfs
Submitter	: Alexander Beregalov <a.beregalov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-15 12:43 (32 days old)
References	: http://marc.info/?l=linux-kernel&m=123979949820538&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13119
Subject		: Trouble with make-install from a NFS mount
Submitter	: Gregory Haskins <ghaskins-Et1tbQHTxzrQT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-14 21:32 (33 days old)
References	: http://marc.info/?l=linux-kernel&m=123974482327044&w=4
Handled-By	: H. Peter Anvin <hpa-YMNOUZJC4hwAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13118
Subject		: iptables very slow after commit 784544739a25c30637397ace5489eeb6e15d7d49
Submitter	: Jeff Chua <jeff.chua.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-10 16:05 (37 days old)
References	: http://lkml.org/lkml/2009/4/10/111
		  http://lkml.org/lkml/2009/4/25/83
Handled-By	: Eric Dumazet <dada1-fPLkHRcR87vqlBn2x/YWAg@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13116
Subject		: Can't boot with nosmp
Submitter	: Stephen Hemminger <shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-15 4:18 (32 days old)
References	: http://marc.info/?l=linux-kernel&m=123976917817920&w=4
Handled-By	: Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13107
Subject		: LTP 20080131 causes defunct processes w/2.6.30-rc1
Submitter	: Kumar Gala <galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Date		: 2009-04-09 15:43 (38 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3bfa0cba867f23365b81658b47efd906830879b
References	: http://marc.info/?l=linux-kernel&m=123929187208953&w=4
		  http://lkml.org/lkml/2009/4/10/193
Handled-By	: Sukadev Bhattiprolu <sukadev-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13069
Subject		: regression in 2.6.29-git3 on SH/Dreamcast
Submitter	: Adrian McMenamin <adrian-TSF8l6Tg6afpT6hvJLqO3U8SxdOydiOw@public.gmane.org>
Date		: 2009-03-29 19:04 (49 days old)
References	: http://marc.info/?l=linux-kernel&m=123835353115372&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13068
Subject		: Lockdep warining in inotify_dev_queue_event
Submitter	: Sachin Sant <sachinp-xthvdsQ13ZrQT0dZR+AlfA@public.gmane.org>
Date		: 2009-04-05 12:37 (42 days old)
References	: http://marc.info/?l=linux-kernel&m=123893439229272&w=4


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13125
Subject		: active uvcvideo breaks over suspend
Submitter	: Alan Jenkins <alan-jenkins-cCz0Lq7MMjm9FHfhHBbuYA@public.gmane.org>
Date		: 2009-04-15 10:12 (32 days old)
References	: http://marc.info/?l=linux-kernel&m=123979009508840&w=4
Handled-By	: Ming Lei <tom.leiming-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Patch		: http://lkml.org/lkml/2009/4/18/5


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13122
Subject		: reiserfs_delete_xattrs: Couldn't delete all xattrs (-13)
Submitter	: Alexander Beregalov <a.beregalov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-16 19:23 (31 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d984561b326cd0fe0d1183d11b9b4fa1d011d21d
References	: http://marc.info/?l=linux-kernel&m=123990989515105&w=4
Handled-By	: Jeff Mahoney <jeffm-IBi9RG/b67k@public.gmane.org>
Patch		: http://lkml.org/lkml/2009/5/10/91


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13109
Subject		: High latency on /sys/class/thermal
Submitter	: Tiago Simões Batista <tiagosbatista-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-04-11 14:56 (36 days old)
References	: http://marc.info/?l=linux-kernel&m=123946182301248&w=4
Handled-By	: Zhang Rui <rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
		  Alexey Starikovskiy <astarikovskiy-l3A5Bk7waGM@public.gmane.org>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=21061
		  http://bugzilla.kernel.org/attachment.cgi?id=21282


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.29,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=13070

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

[Bug #13319] Page allocation failures with b43 and p54usb

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.29.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
Subject		: Page allocation failures with b43 and p54usb
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2009-04-29 21:01 (18 days old)
References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Andrew Morton]

On Sat, 16 May 2009 21:20:45 +0200 (CEST) "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org> wrote:

> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> Subject		: Page allocation failures with b43 and p54usb
> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date		: 2009-04-29 21:01 (18 days old)
> References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>
> 
> 

Well..  order-1 GFP_ATOMIC allocations are unreliable.  The networking
code should hanlde the situation and recover.  I assume that is
happening in this case?

Perhaps we did something in that code after 2.6.29 which increased the
frequency of the order-1 allocation attempts?  Maybe earlier kernels
used order-0 all the time?  Those are much more reliable.

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Andrew Morton wrote:
> 
> Well..  order-1 GFP_ATOMIC allocations are unreliable.  The networking
> code should hanlde the situation and recover.  I assume that is
> happening in this case?

Yes, the driver has recovered in all cases so far.

> Perhaps we did something in that code after 2.6.29 which increased the
> frequency of the order-1 allocation attempts?  Maybe earlier kernels
> used order-0 all the time?  Those are much more reliable.

I think something happened to change the allocation as I never saw these O(1)
failures before with these particular drivers. I put in a few test printk's and
the buffers were 700-800 bytes long, and I would not expect them to require more
than an O(0) allocation.

I pushed 2.6.30-rc6 hard for ~12 hours without any recurrence of the problem.
Given the relative infrequency of the error, this certainly does not indicate a
fix in recent code. I will be trying to force it again.

Larry

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Pekka Enberg]

Hi Andrew,

On Sat, 16 May 2009 21:20:45 +0200 (CEST) "Rafael J. Wysocki"
<rjw-KKrjLPT3xs0@public.gmane.org> wrote:
>> This message has been generated automatically as a part of a report
>> of recent regressions.
>>
>> The following bug entry is on the current list of known regressions
>> from 2.6.29.  Please verify if it still should be listed and let me know
>> (either way).
>>
>>
>> Bug-Entry     : http://bugzilla.kernel.org/show_bug.cgi?id=13319
>> Subject               : Page allocation failures with b43 and p54usb
>> Submitter     : Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
>> Date          : 2009-04-29 21:01 (18 days old)
>> References    : http://marc.info/?l=linux-kernel&m=124103897101088&w=4
>> Handled-By    : Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

On Sun, May 17, 2009 at 2:36 AM, Andrew Morton
<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote:
> Well..  order-1 GFP_ATOMIC allocations are unreliable.  The networking
> code should hanlde the situation and recover.  I assume that is
> happening in this case?
>
> Perhaps we did something in that code after 2.6.29 which increased the
> frequency of the order-1 allocation attempts?  Maybe earlier kernels
> used order-0 all the time?  Those are much more reliable.

I wonder if this is related:

http://bugzilla.kernel.org/show_bug.cgi?id=13069

Both point to post 2.6.29... Hmm.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Bug #13319] Page allocation failures with b43 and p54usb

[Larry Finger]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
> 
> The following bug entry is on the current list of known regressions
> from 2.6.29.  Please verify if it still should be listed and let me know
> (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=13319
> Subject		: Page allocation failures with b43 and p54usb
> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date		: 2009-04-29 21:01 (18 days old)
> References	: http://marc.info/?l=linux-kernel&m=124103897101088&w=4
> Handled-By	: Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>

I have been unable to repeat the problem with recent kernels - I am now running
2.6.30-rc6. This regression should probably be dropped even though it may show
up when 2.6.30 is released.

Larry