Re: 2.6.30-rc6: BUG at fs/xfs/support/debug.c:109!

[Alexander Beregalov <a.beregalov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

2009/6/4 Dave Chinner <david-FqsqvQoI3Ljby3iVrkZq2A@public.gmane.org>:
> On Mon, Jun 01, 2009 at 07:22:56PM +0400, Alexander Beregalov wrote:
>> Hi
>>
>> Assertion failed: *nmap >= 1, file: fs/xfs/xfs_bmap.c, line: 4846
> .....
>> Call Trace:
>>  [<ffffffff803d6bad>] xfs_bmapi+0xad/0x1ad0
>>  [<ffffffff803ee5c0>] xfs_dir2_leaf_getdents+0x640/0x7b0
>>  [<ffffffff803e975c>] xfs_readdir+0x12c/0x140
>>  [<ffffffff80430b57>] xfs_file_readdir+0x47/0x70
>>  [<ffffffff802ec500>] vfs_readdir+0xd0/0xf0
>>  [<ffffffff802ec6b6>] sys_getdents+0x96/0x110
>>  [<ffffffff8020ba6b>] system_call_fastpath+0x16/0x1b
>
> I'd say this indicates a corrupted directory.  Can you run
> 'xfs_repair -n' over the filesystem and see if it finds a bad
> directory?

Hi Dave

It is a rootfs. xfs_repair found and fixed all errors, but after
reboot the problem still persists (but at another stage of running
`emerge`).

localhost ~ # echo s > /proc/sysrq-trigger
localhost ~ # echo s > /proc/sysrq-trigger
localhost ~ # echo u > /proc/sysrq-trigger
localhost ~ # xfs_repair -nd /dev/sda2
Phase 1 - find and verify superblock...
Phase 2 - using internal log
        - scan filesystem freespace and inode maps...
        - found root inode chunk
Phase 3 - for each AG...
        - scan (but don't clear) agi unlinked lists...
        - process known inodes and perform inode discovery...
        - agno = 0
        - agno = 1
        - agno = 2
        - agno = 3
        - agno = 4
        - agno = 5
        - agno = 6
        - agno = 7
        - agno = 8
        - agno = 9
        - agno = 10
        - agno = 11
        - agno = 12
        - agno = 13
        - agno = 14
        - agno = 15
        - process newly discovered inodes...
Phase 4 - check for duplicate blocks...
        - setting up duplicate extent list...
        - check for inodes claiming duplicate blocks...
        - agno = 0
        - agno = 1
        - agno = 2
        - agno = 4
        - agno = 3
        - agno = 5
        - agno = 6
        - agno = 7
        - agno = 8
        - agno = 9
        - agno = 10
        - agno = 11
        - agno = 12
        - agno = 13
        - agno = 14
        - agno = 15
No modify flag set, skipping phase 5
Phase 6 - check inode connectivity...
        - traversing filesystem ...
        - traversal finished ...
        - moving disconnected inodes to lost+found ...
Phase 7 - verify link counts...
No modify flag set, skipping filesystem flush and exiting.