[Bug #11849] default IRQ affinity change in v2.6.27 (breaking several SMP PPC based systems)

[Bug #11849] default IRQ affinity change in v2.6.27 (breaking several SMP PPC based systems)

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11849
Subject		: default IRQ affinity change in v2.6.27 (breaking several SMP PPC based systems)
Submitter	: Kumar Gala <galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
Date		: 2008-10-24 12:45 (80 days old)
References	: http://marc.info/?l=linux-kernel&m=122485245924125&w=4

[Bug #12061] snd_hda_intel: power_save: sound cracks on powerdown

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12061
Subject		: snd_hda_intel: power_save: sound cracks on powerdown
Submitter	: Jens Weibler <bugzilla-kernel-6hJTtV8wudIr9FUcG+3rRQ@public.gmane.org>
Date		: 2008-11-18 12:07 (55 days old)
Handled-By	: Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>

[Bug #12155] Regression in 2.6.28-rc and 2.6.27-stable - hibernate related

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12155
Subject		: Regression in 2.6.28-rc and 2.6.27-stable - hibernate related
Submitter	: Fabio Comolli <fabio.comolli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2008-11-23 16:17 (50 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=5e55aa8db085dad1aabb4574c73c23c7ae571e7b
References	: http://marc.info/?l=linux-kernel&m=122745709926361&w=4

Re: [Bug #12155] Regression in 2.6.28-rc and 2.6.27-stable - hibernate related

[Fabio Comolli]

It's been solved in 2.6.28-final and backported to 2.6.27.10 (a revert
of a Dave Kelikamp's commit).

On Sun, Jan 11, 2009 at 12:41 PM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
>
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
>
>
> Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12155
> Subject         : Regression in 2.6.28-rc and 2.6.27-stable - hibernate related
> Submitter       : Fabio Comolli <fabio.comolli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date            : 2008-11-23 16:17 (50 days old)
> First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=5e55aa8db085dad1aabb4574c73c23c7ae571e7b
> References      : http://marc.info/?l=linux-kernel&m=122745709926361&w=4
>
>
>

Re: [Bug #12155] Regression in 2.6.28-rc and 2.6.27-stable - hibernate related

[Rafael J. Wysocki]

On Sunday 11 January 2009, Fabio Comolli wrote:
> It's been solved in 2.6.28-final and backported to 2.6.27.10 (a revert
> of a Dave Kelikamp's commit).
> 
> On Sun, Jan 11, 2009 at 12:41 PM, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.27 and 2.6.28.
> >
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> > be listed and let me know (either way).
> >
> >
> > Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12155
> > Subject         : Regression in 2.6.28-rc and 2.6.27-stable - hibernate related
> > Submitter       : Fabio Comolli <fabio.comolli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Date            : 2008-11-23 16:17 (50 days old)
> > First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=5e55aa8db085dad1aabb4574c73c23c7ae571e7b
> > References      : http://marc.info/?l=linux-kernel&m=122745709926361&w=4

Thanks, closed.

Rafael

[Bug #12159] 2.6.28-rc6-git1 -- No sound produced from Intel HDA ALSA driver

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12159
Subject		: 2.6.28-rc6-git1 -- No sound produced from Intel HDA ALSA driver
Submitter	: Miles Lane <miles.lane-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2008-11-27 20:33 (46 days old)
References	: http://marc.info/?l=linux-kernel&m=122781805620212&w=4
Handled-By	: Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>

[Bug #12160] networking oops after resume from s2ram (2.6.28-rc6)

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12160
Subject		: networking oops after resume from s2ram (2.6.28-rc6)
Submitter	: Marcin Slusarz <marcin.slusarz@gmail.com>
Date		: 2008-11-28 21:15 (45 days old)
References	: http://marc.info/?l=linux-kernel&m=122790701615723&w=4

[Bug #12208] uml is very slow on 2.6.28 host

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12208
Subject		: uml is very slow on 2.6.28 host
Submitter	: Miklos Szeredi <miklos-sUDqSbJrdHQHWmgEVkV9KA@public.gmane.org>
Date		: 2008-12-12 9:35 (31 days old)
References	: http://marc.info/?l=linux-kernel&m=122907463518593&w=4

Re: [Bug #12208] uml is very slow on 2.6.28 host

[Miklos Szeredi]

On Sun, 11 Jan 2009, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12208
> Subject		: uml is very slow on 2.6.28 host
> Submitter	: Miklos Szeredi <miklos-sUDqSbJrdHQHWmgEVkV9KA@public.gmane.org>
> Date		: 2008-12-12 9:35 (31 days old)
> References	: http://marc.info/?l=linux-kernel&m=122907463518593&w=4

Yes, this still exists on latest -git.

Thanks,
Miklos

Re: [Bug #12208] uml is very slow on 2.6.28 host

[Rafael J. Wysocki]

On Monday 12 January 2009, Miklos Szeredi wrote:
> On Sun, 11 Jan 2009, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.27 and 2.6.28.
> > 
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> > be listed and let me know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12208
> > Subject		: uml is very slow on 2.6.28 host
> > Submitter	: Miklos Szeredi <miklos-sUDqSbJrdHQHWmgEVkV9KA@public.gmane.org>
> > Date		: 2008-12-12 9:35 (31 days old)
> > References	: http://marc.info/?l=linux-kernel&m=122907463518593&w=4
> 
> Yes, this still exists on latest -git.

Thanks for the update.

Rafael

[Bug #12216] Error when drm is loaded

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12216
Subject		: Error when drm is loaded
Submitter	: François Valenduc <francois.valenduc-bmtTS95sd5BUM80lpFwj4w@public.gmane.org>
Date		: 2008-12-13 09:59 (30 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50

Re: [Bug #12216] Error when drm is loaded

[François Valenduc]

Rafael J. Wysocki a écrit :
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
>
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
>
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12216
> Subject		: Error when drm is loaded
> Submitter	: François Valenduc <francois.valenduc-bmtTS95sd5BUM80lpFwj4w@public.gmane.org>
> Date		: 2008-12-13 09:59 (30 days old)
> First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50
>
>
>
>   
This problem has been solved by the following patch:

commit 077ebed54fe66612f58b076628a72eca2be8df90
Author: Dave Airlie <airlied-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Date:   Mon Dec 22 17:11:02 2008 +1000

    drm/radeon: fix correctness of irq_enabled check for radeon.


This fix is in kernel 2.6.28, so this bug can be removed from the
regression list.

François Valenduc

Re: [Bug #12216] Error when drm is loaded

[Rafael J. Wysocki]

On Sunday 11 January 2009, François Valenduc wrote:
> Rafael J. Wysocki a écrit :
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.27 and 2.6.28.
> >
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> > be listed and let me know (either way).
> >
> >
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12216
> > Subject		: Error when drm is loaded
> > Submitter	: François Valenduc <francois.valenduc-bmtTS95sd5BUM80lpFwj4w@public.gmane.org>
> > Date		: 2008-12-13 09:59 (30 days old)
> > First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50
> >
> >
> >
> >   
> This problem has been solved by the following patch:
> 
> commit 077ebed54fe66612f58b076628a72eca2be8df90
> Author: Dave Airlie <airlied-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Date:   Mon Dec 22 17:11:02 2008 +1000
> 
>     drm/radeon: fix correctness of irq_enabled check for radeon.
> 
> 
> This fix is in kernel 2.6.28, so this bug can be removed from the
> regression list.

Thanks, closed.

Rafael

[Bug #12224] journal activity on inactive partition causes inactive harddrive spinup

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12224
Subject		: journal activity on inactive partition causes inactive harddrive spinup
Submitter	: C Sights <csights-97jfqw80gc6171pxa8y+qA@public.gmane.org>
Date		: 2008-12-14 11:39 (29 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c87591b719737b4e91eb1a9fa8fd55a4ff1886d6
Handled-By	: Eric Sandeen <sandeen-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

[Bug #12209] oldish top core dumps (in its meminfo() function)

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12209
Subject		: oldish top core dumps (in its meminfo() function)
Submitter	: Andreas Mohr <andi-5+Cda9B46AM@public.gmane.org>
Date		: 2008-12-12 18:49 (31 days old)
References	: http://marc.info/?l=linux-kernel&m=122910784006472&w=4
		  http://marc.info/?l=linux-kernel&m=122907511319288&w=4

[Bug #12260] Regression due to commit 2b80848e3818fb1c (p54usb: support LM87 firmwares)

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12260
Subject		: Regression due to commit 2b80848e3818fb1c (p54usb: support LM87 firmwares)
Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Date		: 2008-12-20 10:45 (23 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2b80848e3818fb1c8ccddc105b065a86c68afa9d
Patch		: http://bugzilla.kernel.org/show_bug.cgi?id=12260


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Bug #12260] Regression due to commit 2b80848e3818fb1c (p54usb: support LM87 firmwares)

[Larry Finger]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12260
> Subject		: Regression due to commit 2b80848e3818fb1c (p54usb: support LM87 firmwares)
> Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> Date		: 2008-12-20 10:45 (23 days old)
> First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2b80848e3818fb1c8ccddc105b065a86c68afa9d
> Patch		: http://bugzilla.kernel.org/show_bug.cgi?id=12260

The patch has _NOT_ been applied.

Larry

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Bug #12260] Regression due to commit 2b80848e3818fb1c (p54usb: support LM87 firmwares)

[Rafael J. Wysocki]

On Sunday 11 January 2009, Larry Finger wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.27 and 2.6.28.
> > 
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> > be listed and let me know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12260
> > Subject		: Regression due to commit 2b80848e3818fb1c (p54usb: support LM87 firmwares)
> > Submitter	: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
> > Date		: 2008-12-20 10:45 (23 days old)
> > First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2b80848e3818fb1c8ccddc105b065a86c68afa9d
> > Patch		: http://bugzilla.kernel.org/show_bug.cgi?id=12260
> 
> The patch has _NOT_ been applied.

Thanks for the update.

Rafael

[Bug #12264] i915: switching from kwin in opengl mode to a VT then back to x11, x11 freezes

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12264
Subject		: i915: switching from kwin in opengl mode to a VT then back to x11, x11 freezes
Submitter	: Caleb Cushing <xenoterracide-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2008-12-16 11:40 (27 days old)
References	: http://marc.info/?l=linux-kernel&m=122942777030666&w=4

Re: [Bug #12264] i915: switching from kwin in opengl mode to a VT then back to x11, x11 freezes

[Caleb Cushing]

so far I'm tracking with gentoo here.
http://bugs.gentoo.org/show_bug.cgi?id=253813 and freedesktop here
http://bugs.freedesktop.org/process_bug.cgi

and I've tested the first 2 kernel patches alone, and still have the
issue, haven't been able to add the libdrm patch to libdrm so far.

On 1/11/09, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> This message has been generated automatically as a part of a report
>  of regressions introduced between 2.6.27 and 2.6.28.
>
>  The following bug entry is on the current list of known regressions
>  introduced between 2.6.27 and 2.6.28.  Please verify if it still should
>  be listed and let me know (either way).
>
>
>  Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12264
>  Subject         : i915: switching from kwin in opengl mode to a VT then back to x11, x11 freezes
>  Submitter       : Caleb Cushing <xenoterracide-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>  Date            : 2008-12-16 11:40 (27 days old)
>  References      : http://marc.info/?l=linux-kernel&m=122942777030666&w=4
>
>
>


-- 
Caleb Cushing

http://xenoterracide.blogspot.com

Re: [Bug #12264] i915: switching from kwin in opengl mode to a VT then back to x11, x11 freezes

[Rafael J. Wysocki]

On Monday 12 January 2009, Caleb Cushing wrote:
> so far I'm tracking with gentoo here.
> http://bugs.gentoo.org/show_bug.cgi?id=253813 and freedesktop here
> http://bugs.freedesktop.org/process_bug.cgi
> 
> and I've tested the first 2 kernel patches alone, and still have the
> issue, haven't been able to add the libdrm patch to libdrm so far.

Thanks for the update.

Rafael


> On 1/11/09, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> > This message has been generated automatically as a part of a report
> >  of regressions introduced between 2.6.27 and 2.6.28.
> >
> >  The following bug entry is on the current list of known regressions
> >  introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> >  be listed and let me know (either way).
> >
> >
> >  Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12264
> >  Subject         : i915: switching from kwin in opengl mode to a VT then back to x11, x11 freezes
> >  Submitter       : Caleb Cushing <xenoterracide-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >  Date            : 2008-12-16 11:40 (27 days old)
> >  References      : http://marc.info/?l=linux-kernel&m=122942777030666&w=4

[Bug #12279] 2.6.28 suspend regression - HP 2510p

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12279
Subject		: 2.6.28 suspend regression - HP 2510p
Submitter	: David Roka <roka-4MBvQsVlD4U@public.gmane.org>
Date		: 2008-12-23 04:17 (20 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab

Re: [Bug #12279] 2.6.28 suspend regression - HP 2510p

[Bartlomiej Zolnierkiewicz]

On Sunday 11 January 2009, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12279
> Subject		: 2.6.28 suspend regression - HP 2510p
> Submitter	: David Roka <roka-4MBvQsVlD4U@public.gmane.org>
> Date		: 2008-12-23 04:17 (20 days old)
> First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab

The fix went in the first IDE updates pull for 2.6.29:

commit 0e63a588fc3d6a5e6bb66bacaeb11cd9093141f8
Author: Bartlomiej Zolnierkiewicz <bzolnier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date:   Mon Dec 29 20:27:29 2008 +0100

    ide: fix IDE ACPI regression breaking suspend
...

so it can be marked as closed now.

Thanks,
Bart

Re: [Bug #12279] 2.6.28 suspend regression - HP 2510p

[Rafael J. Wysocki]

On Sunday 11 January 2009, Bartlomiej Zolnierkiewicz wrote:
> On Sunday 11 January 2009, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.27 and 2.6.28.
> > 
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> > be listed and let me know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12279
> > Subject		: 2.6.28 suspend regression - HP 2510p
> > Submitter	: David Roka <roka-4MBvQsVlD4U@public.gmane.org>
> > Date		: 2008-12-23 04:17 (20 days old)
> > First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab
> 
> The fix went in the first IDE updates pull for 2.6.29:
> 
> commit 0e63a588fc3d6a5e6bb66bacaeb11cd9093141f8
> Author: Bartlomiej Zolnierkiewicz <bzolnier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date:   Mon Dec 29 20:27:29 2008 +0100
> 
>     ide: fix IDE ACPI regression breaking suspend
> ...
> 
> so it can be marked as closed now.

Thanks for closing.

Best,
Rafael

[Bug #12263] Sata soft reset filling log

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12263
Subject		: Sata soft reset filling log
Submitter	: Justin Madru <bevicm@dslextreme.com>
Date		: 2008-12-13 2:07 (30 days old)
References	: http://marc.info/?l=linux-kernel&m=122913412608533&w=4

Re: [Bug #12263] Sata soft reset filling log

[Justin Madru]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
>
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
>
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12263
> Subject		: Sata soft reset filling log
> Submitter	: Justin Madru <bevicm-QP1aEjBt37AFQeE35raUng@public.gmane.org>
> Date		: 2008-12-13 2:07 (30 days old)
> References	: http://marc.info/?l=linux-kernel&m=122913412608533&w=4
>
>
>
>   
Yes, I'm still seeing this on .28 and even on .29-rc1.
I checked again and couldn't trigger the regression on a .27 kernel (at 
least with my hardware and config).
So, I'm fairly confident that it's a regression, not just a bug that's 
always been there.

Re: [Bug #12263] Sata soft reset filling log

[Rafael J. Wysocki]

On Tuesday 13 January 2009, Justin Madru wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.27 and 2.6.28.
> >
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> > be listed and let me know (either way).
> >
> >
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12263
> > Subject		: Sata soft reset filling log
> > Submitter	: Justin Madru <bevicm-QP1aEjBt37AFQeE35raUng@public.gmane.org>
> > Date		: 2008-12-13 2:07 (30 days old)
> > References	: http://marc.info/?l=linux-kernel&m=122913412608533&w=4
> >
> >
> >
> >   
> Yes, I'm still seeing this on .28 and even on .29-rc1.
> I checked again and couldn't trigger the regression on a .27 kernel (at 
> least with my hardware and config).
> So, I'm fairly confident that it's a regression, not just a bug that's 
> always been there.

Thanks for the update.

Rafael

[Bug #12265] FPU emulation broken in 2.6.28-rc8 ?

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12265
Subject		: FPU emulation broken in 2.6.28-rc8 ?
Submitter	: Rogier Wolff <R.E.Wolff-bu/CaDbLbdHGjfRZg6uqBA@public.gmane.org>
Date		: 2008-12-17 8:56 (26 days old)
References	: http://marc.info/?l=linux-kernel&m=122950463030747&w=4

[Bug #12337] ~100 extra wakeups reported by powertop

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12337
Subject		: ~100 extra wakeups reported by powertop
Submitter	: Alberto Gonzalez <luis6674-/E1597aS9LQAvxtiuMwx3w@public.gmane.org>
Date		: 2008-12-31 12:25 (12 days old)

Re: [Bug #12337] ~100 extra wakeups reported by powertop

[Alberto Gonzalez]

--- On Sun, 1/11/09, Rafael J. Wysocki <rjw-KKrjLPT3xs0@public.gmane.org> wrote:

> The following bug entry is on the current list of known
> regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it
> still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	:
> http://bugzilla.kernel.org/show_bug.cgi?id=12337
> Subject		: ~100 extra wakeups reported by powertop
> Submitter	: Alberto Gonzalez <luis6674-/E1597aS9LQAvxtiuMwx3w@public.gmane.org>
> Date		: 2008-12-31 12:25 (12 days old)

I was waiting for 2.6.28.1 to come out and test it, but since it's not yet out just to say that yes, the problem is still there.

Alberto.


      

[Bug #12391] Processor does not go below C2 state until usb.autosuspend is enabled

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12391
Subject		: Processor does not go below C2 state until usb.autosuspend is enabled
Submitter	: Gergely Imreh <imrehg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2009-01-09 02:35 (3 days old)

Re: [Bug #12391] Processor does not go below C2 state until usb.autosuspend is enabled

[Pavel Machek]

On Sun 2009-01-11 12:41:04, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12391
> Subject		: Processor does not go below C2 state until usb.autosuspend is enabled
> Submitter	: Gergely Imreh <imrehg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date		: 2009-01-09 02:35 (3 days old)

Are you sure that's regression? IIRC usb.autosuspend is needed for
C3. It is certainly needed if you have *any* usb device plugged in.

What hw is that?

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[Bug #12393] debugging in dosemu causes lots of 'scheduling while atomic'

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12393
Subject		: debugging in dosemu causes lots of 'scheduling while atomic'
Submitter	: Michal Suchanek <hramrach-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
Date		: 2009-01-09 07:28 (3 days old)

[PATCH] x86: vm86: fix preemption bug

[Thomas Gleixner]

Impact: fix scheduling while atomic bug

commit 3d2a71a596bd9c761c8487a2178e95f8a61da083 (x86, traps: converge
do_debug handlers) changed the preemption disable logic of do_debug()
so vm86_handle_trap() is called with preemption disabled resulting in:

BUG: sleeping function called from invalid context at include/linux/kernel.h:155
in_atomic(): 1, irqs_disabled(): 0, pid: 3005, name: dosemu.bin
Pid: 3005, comm: dosemu.bin Tainted: G        W  2.6.29-rc1 #51
Call Trace:
 [<c050d669>] copy_to_user+0x33/0x108
 [<c04181f4>] save_v86_state+0x65/0x149
 [<c0418531>] handle_vm86_trap+0x20/0x8f
 [<c064e345>] do_debug+0x15b/0x1a4
 [<c064df1f>] debug_stack_correct+0x27/0x2c
 [<c040365b>] sysenter_do_call+0x12/0x2f
BUG: scheduling while atomic: dosemu.bin/3005/0x10000001

Restore the original calling convention and reenable preemption before
calling handle_vm86_trap().

Reported-by: Michal Suchanek <hramrach-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
Cc: stable-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Signed-off-by: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
---
 arch/x86/kernel/traps.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

Index: linux-2.6/arch/x86/kernel/traps.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/traps.c
+++ linux-2.6/arch/x86/kernel/traps.c
@@ -99,6 +99,12 @@ static inline void preempt_conditional_s
 		local_irq_enable();
 }
 
+static inline void conditional_cli(struct pt_regs *regs)
+{
+	if (regs->flags & X86_EFLAGS_IF)
+		local_irq_disable();
+}
+
 static inline void preempt_conditional_cli(struct pt_regs *regs)
 {
 	if (regs->flags & X86_EFLAGS_IF)
@@ -626,8 +632,10 @@ clear_dr7:
 
 #ifdef CONFIG_X86_32
 debug_vm86:
+	/* reenable preemption: handle_vm86_trap() might sleep */
+	dec_preempt_count();
 	handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
-	preempt_conditional_cli(regs);
+	conditional_cli(regs);
 	return;
 #endif
 

Re: [PATCH] x86: vm86: fix preemption bug

[Michal Suchanek]

On 13/01/2009, Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org> wrote:
> Impact: fix scheduling while atomic bug
>
>  commit 3d2a71a596bd9c761c8487a2178e95f8a61da083 (x86, traps: converge
>  do_debug handlers) changed the preemption disable logic of do_debug()
>  so vm86_handle_trap() is called with preemption disabled resulting in:
>

The patch seems to fix the the problem for me.

However, the patch does not apply automatically neither to 2.6.28 nor
2.6.29-rc1.

Thanks

Michal

[Bug #12395] 2.6.28-rc9: oprofile regression

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12395
Subject		: 2.6.28-rc9: oprofile regression
Submitter	: Tim Blechmann <tim-xpEK/MU0Hawdnm+yROfE0A@public.gmane.org>
Date		: 2008-12-21 14:23 (22 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b99170288421c79f0c2efa8b33e26e65f4bb7fb8
References	: http://marc.info/?l=linux-kernel&m=122986946614791&w=4
Handled-By	: Andi Kleen <ak-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

[Bug #12396] hwinfo problem since 2.6.28

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12396
Subject		: hwinfo problem since 2.6.28
Submitter	: Beschorner Daniel <Daniel.Beschorner-cdG02ZADnvLQT0dZR+AlfA@public.gmane.org>
Date		: 2009-01-06 8:53 (6 days old)
References	: http://marc.info/?l=linux-kernel&m=123123277800835&w=4
Handled-By	: Suresh Siddha <suresh.b.siddha-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Patch		: http://marc.info/?l=linux-kernel&m=123154005127497&w=4

[Bug #12401] 2.6.28 regression: xbacklight broken on ThinkPad X61s

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12401
Subject		: 2.6.28 regression: xbacklight broken on ThinkPad X61s
Submitter	: Tino Keitel <tino.keitel-Mmb7MZpHnFY@public.gmane.org>
Date		: 2009-01-05 8:39 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=22c13f9d8179f4c9caecfcb60a95214562b9addc
References	: http://marc.info/?l=linux-kernel&m=123114479110314&w=4

[Bug #12404] Oops in 2.6.28-rc9 and -rc8 -- mtrr issues / e1000e

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12404
Subject		: Oops in 2.6.28-rc9 and -rc8 -- mtrr issues / e1000e
Submitter	: Kernel <kernel-nOyj/A09A+/k1uMJSBkQmQ@public.gmane.org>
Date		: 2008-12-22 9:37 (21 days old)
References	: http://marc.info/?l=linux-kernel&m=122993873320150&w=4

Re: [Bug #12404] Oops in 2.6.28-rc9 and -rc8 -- mtrr issues / e1000e

[Thomas Gleixner]

On Sun, 11 Jan 2009, Rafael J. Wysocki wrote:

> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12404
> Subject		: Oops in 2.6.28-rc9 and -rc8 -- mtrr issues / e1000e
> Submitter	: Kernel <kernel@bazarnic.net>
> Date		: 2008-12-22 9:37 (21 days old)
> References	: http://marc.info/?l=linux-kernel&m=122993873320150&w=4

@Raphael: 
	  not a regression:
> Btw, I get the same crashes in 2.6.27.6 and 2.6.27.9 as well.

@Doug: 
       can you please boot with "nopat" on the kernel command line.

@Yinghai, Venki: 
	  can you please have a look at the mtrr messages? The
	  kernel warning is not very informative.

Thanks,

	tglx

[Bug #12403] TTY problem on linux-2.6.28-rc7

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12403
Subject		: TTY problem on linux-2.6.28-rc7
Submitter	: sasa sasa <sasak.1983-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2008-12-22 4:23 (21 days old)
References	: http://marc.info/?l=linux-kernel&m=122991914600390&w=4

[Bug #12405] oops in __bounce_end_io_read under kvm

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12405
Subject		: oops in __bounce_end_io_read under kvm
Submitter	: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
Date		: 2008-12-26 17:36 (17 days old)
References	: http://marc.info/?l=linux-kernel&m=123031303400676&w=4
Handled-By	: Jens Axboe <jens.axboe-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>

[Bug #12407] Kernel 2.6.28 regression: Hang after hibernate

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12407
Subject		: Kernel 2.6.28 regression: Hang after hibernate
Submitter	: Frank Groeneveld <frankgroeneveld-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2008-12-28 20:34 (15 days old)
References	: http://marc.info/?l=linux-kernel&m=123049651906081&w=4

[Bug #12406] 2.6.28 thinks that my PS/2 mouse is a touchpad

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12406
Subject		: 2.6.28 thinks that my PS/2 mouse is a touchpad
Submitter	: Alexander E. Patrakov <patrakov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2008-12-27 9:06 (16 days old)
References	: http://marc.info/?l=linux-kernel&m=123036893817280&w=4
Handled-By	: Arjan Opmeer <arjan-OssVvNj1wBysTnJN9+BGXg@public.gmane.org>
Patch		: http://marc.info/?l=linux-kernel&m=123092147703236&w=4

[Bug #12410] resource map sanity check conflict: 0x7fffff00 0x800000ff 0x7ffff000 0x7fffffff ACPI Non-volatile Storage

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12410
Subject		: resource map sanity check conflict: 0x7fffff00 0x800000ff 0x7ffff000 0x7fffffff ACPI Non-volatile Storage
Submitter	: Martin MOKREJÅ  <mmokrejs-FKSC99mem8wheYDy1lqhK0JFmxxWawaa@public.gmane.org>
Date		: 2008-12-30 14:56 (13 days old)
References	: http://marc.info/?l=linux-kernel&m=123064945018849&w=4

Re: [Bug #12410] resource map sanity check conflict: 0x7fffff00 0x800000ff 0x7ffff000 0x7fffffff ACPI Non-volatile Storage

[Martin MOKREJŠ]

[-- Attachment #1: Type: text/plain, Size: 1053 bytes --]

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12410
> Subject		: resource map sanity check conflict: 0x7fffff00 0x800000ff 0x7ffff000 0x7fffffff ACPI Non-volatile Storage
> Submitter	: Martin MOKREJŠ <mmokrejs@ribosome.natur.cuni.cz>
> Date		: 2008-12-30 14:56 (13 days old)
> References	: http://marc.info/?l=linux-kernel&m=123064945018849&w=4

The above bug is gone from 2.6.29-rc1.

I see the
WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x467/0x69a()
line but know patch already went through this list.

For the 
spurious 8259A interrupt: IRQ7.
message I will start another thread if I won't find it in kernel archives/
mail yet unread email.

Martin

[-- Attachment #2: dmesg-2.6.29-rc1 --]
[-- Type: text/plain, Size: 25969 bytes --]

Linux version 2.6.29-rc1 (root@vrapenec) (gcc version 4.3.2 (Gentoo 4.3.2-r2 p1.5, pie-10.1.5) ) #1 Sun Jan 11 23:46:00 MET 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff9000 (usable)
 BIOS-e820: 000000007fff9000 - 000000007ffff000 (ACPI data)
 BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x7fff9 max_arch_pfn = 0x100000
kernel direct mapping tables up to 377fe000 @ 7000-d000
ACPI: RSDP 000F6890, 0014 (r0 ASUS  )
ACPI: RSDT 7FFF9000, 002C (r1 ASUS   P4_L3CS  42302E31 MSFT 31313031)
ACPI: FACP 7FFF9080, 0074 (r1 ASUS   P4_L3CS  42302E31 MSFT 31313031)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7FFF9100, 52E9 (r1   ASUS P4_L3CS      1000 MSFT  100000D)
ACPI: FACS 7FFFF000, 0040
ACPI: BOOT 7FFF9040, 0028 (r1 ASUS   P4_L3CS  42302E31 MSFT 31313031)
1159MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 00000000 - 377fe000
  bootmap 00009000 - 0000ff00
(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 00014da588]    TEXT DATA BSS ==> [0001000000 - 00014da588]
  #2 [00014db000 - 00014e2000]    INIT_PG_TABLE ==> [00014db000 - 00014e2000]
  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #4 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #5 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0007fff9
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0007fff9
On node 0 totalpages: 524184
free_area_init_node: node 0, pgdat c1442398, node_mem_map c14e2000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2320 pages used for memmap
  HighMem zone: 294635 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xe408
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7fff0000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520088
Kernel command line: root=/dev/sda3 console=ttyS0,57600n8 console=tty0 vga=0x318 video=vesafb:mtrr:3,ywrap idebus=66 probe_mask=0x3f closcksource=acpi_pm,notsc hpet=force udev
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1800.075 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073668k/2097124k available (2982k kernel code, 22228k reserved, 1419k data, 260k init, 1187820k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffed000 - 0xfffff000   (  72 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc1450000 - 0xc1491000   ( 260 kB)
      .data : 0xc12e98f5 - 0xc144c778   (1419 kB)
      .text : 0xc1000000 - 0xc12e98f5   (2982 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.15 BogoMIPS (lpj=1800075)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
[ds] using netburst configuration
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20081204
ACPI: setting ELCR to 0200 (from 0a28)
net_namespace: 520 bytes
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0e40, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:00:1d.0: reg 20 io port: [0xb800-0xb81f]
pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
spurious 8259A interrupt: IRQ7.
pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x9800-0x9807]
pci 0000:00:1f.1: reg 14 io port: [0x9400-0x9403]
pci 0000:00:1f.1: reg 18 io port: [0x9000-0x9007]
pci 0000:00:1f.1: reg 1c io port: [0x8800-0x8803]
pci 0000:00:1f.1: reg 20 io port: [0x8400-0x840f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0xd5800000-0xd58003ff]
pci 0000:00:1f.3: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
pci 0000:00:1f.5: reg 14 io port: [0xe100-0xe13f]
pci 0000:00:1f.6: reg 10 io port: [0xe200-0xe2ff]
pci 0000:00:1f.6: reg 14 io port: [0xe300-0xe37f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:01:00.0: reg 14 io port: [0xd800-0xd8ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xd7000000-0xd700ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xd7fe0000-0xd7ffffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd7000000-0xd7efffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xdfffffff]
pci 0000:02:05.0: reg 10 io port: [0xa800-0xa8ff]
pci 0000:02:05.0: reg 14 32bit mmio: [0xd6800000-0xd68000ff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:07.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:07.0: supports D1 D2
pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:07.0: PME# disabled
pci 0000:02:07.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:07.1: supports D1 D2
pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:07.1: PME# disabled
pci 0000:02:07.2: reg 10 32bit mmio: [0xd6000000-0xd60007ff]
pci 0000:02:07.2: PME# supported from D0 D3hot D3cold
pci 0000:02:07.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd6000000-0xd6ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 11) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Power Resource [PRCF] (off)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe800-0xe81f has been reserved
system 00:02: ioport range 0xec00-0xec3f has been reserved
system 00:02: ioport range 0x40b-0x40b has been reserved
system 00:02: ioport range 0x480-0x48f has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:03: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:03: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x77c-0x77f has been reserved
system 00:0e: ioport range 0x610-0x62f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xd000-0xdfff
pci 0000:00:01.0:   MEM window: 0xd7000000-0xd7efffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d7f00000-0x000000dfffffff
pci 0000:02:07.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:07.0:   IO window: 0x00a000-0x00a0ff
pci 0000:02:07.0:   IO window: 0x00a400-0x00a4ff
pci 0000:02:07.0:   PREFETCH window: 0x88000000-0x8bffffff
pci 0000:02:07.0:   MEM window: 0x90000000-0x93ffffff
pci 0000:02:07.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:07.1:   IO window: 0x00ac00-0x00acff
pci 0000:02:07.1:   IO window: 0x001000-0x0010ff
pci 0000:02:07.1:   PREFETCH window: 0x8c000000-0x8fffffff
pci 0000:02:07.1:   MEM window: 0x94000000-0x97ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0xa000-0xafff
pci 0000:00:1e.0:   MEM window: 0xd6000000-0xd6ffffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000088000000-0x0000008fffffff
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
pci 0000:02:07.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
pci 0000:02:07.1: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:07.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xd7000000-0xd7efffff]
pci_bus 0000:01: resource 2 mem: [0xd7f00000-0xdfffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xd6000000-0xd6ffffff]
pci_bus 0000:02: resource 2 mem: [0x88000000-0x8fffffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io:  [0xa000-0xa0ff]
pci_bus 0000:03: resource 1 io:  [0xa400-0xa4ff]
pci_bus 0000:03: resource 2 mem: [0x88000000-0x8bffffff]
pci_bus 0000:03: resource 3 mem: [0x90000000-0x93ffffff]
pci_bus 0000:07: resource 0 io:  [0xac00-0xacff]
pci_bus 0000:07: resource 1 io:  [0x1000-0x10ff]
pci_bus 0000:07: resource 2 mem: [0x8c000000-0x8fffffff]
pci_bus 0000:07: resource 3 mem: [0x94000000-0x97ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
highmem bounce pool size: 64 pages
DLM (built Jan 11 2009 23:17:23) installed
squashfs: version 4.0 (2009/01/03) Phillip Lougher
fuse init (API version 7.11)
msgmni has been set to 1731
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for stdrng (ansi_cprng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
radeonfb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=230.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
Switched to high resolution mode on CPU 0
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
Non-DDC laptop panel detected
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: Samsung LTN150P1-L02    
radeonfb: detected LVDS panel size from BIOS: 1400x1050
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 175x65
radeonfb (0000:01:00.0): ATI Radeon 4c57 "LW"
vesafb: cannot reserve video memory at 0xd8000000
vesafb: framebuffer at 0xd8000000, mapped to 0xf9180000, using 4608k, total 32768k
vesafb: mode is 1024x768x24, linelength=3072, pages=13
vesafb: protected mode interface info at c000:52e1
vesafb: pmi: set display start = c00c5375, set palette = c00c53c1
vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4 
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
fb1: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LIDD]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [CFAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (37 C)
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Linux video capture interface: v2.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8400 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8408 irq 15
ata1.00: ATA-6: ST9160821A, 3.ALC, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST9160821A       3.AL PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2.01: ATAPI: Optiarc DVD RW AD-7590A, 1.01, max UDMA/33
ata2.01: configured for UDMA/33
------------[ cut here ]------------
WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x467/0x69a()
Hardware name: System Name
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.29-rc1 #1
Call Trace:
 [<c101a588>] warn_slowpath+0x80/0xb5
 [<c1017eb1>] enqueue_task_fair+0x12a/0x169
 [<c1017eb1>] enqueue_task_fair+0x12a/0x169
 [<c1016c6a>] activate_task+0x1d/0x2a
 [<c102c454>] update_wall_time+0x63f/0x780
 [<c102c6b3>] getnstimeofday+0x4c/0xc9
 [<c1029ea9>] ktime_get_ts+0x1d/0x3f
 [<c11dd88c>] ata_sff_data_xfer32+0x4e/0x9d
 [<c11dd24c>] ata_sff_hsm_move+0x467/0x69a
 [<c11dd6db>] ata_sff_interrupt+0x156/0x1ee
 [<c1039099>] handle_IRQ_event+0x1a/0x3f
 [<c1039d73>] handle_level_irq+0x50/0x85
 [<c1004101>] do_IRQ+0x4d/0x64
 [<c10031a7>] common_interrupt+0x27/0x2c
 [<c1006fb7>] default_idle+0x25/0x38
 [<c1001e66>] cpu_idle+0x37/0x4d
 [<c1450847>] start_kernel+0x20c/0x20f
---[ end trace bbc3255be38b3e97 ]---
scsi 1:0:1:0: CD-ROM            Optiarc  DVD RW AD-7590A  1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg1 type 5
yenta_cardbus 0000:02:07.0: CardBus bridge found [1043:1624]
yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0490, PCI irq 5
yenta_cardbus 0000:02:07.0: Socket status: 30000826
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0xd6000000 - 0xd6ffffff
yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
yenta_cardbus 0000:02:07.1: CardBus bridge found [1043:1624]
yenta_cardbus 0000:02:07.1: ISA IRQ mask 0x0490, PCI irq 11
yenta_cardbus 0000:02:07.1: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge Memory window: 0xd6000000 - 0xd6ffffff
yenta_cardbus 0000:02:07.1: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000b800
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29-rc1 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29-rc1 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input3
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: I/O resource 0000:00:1f.3 [0xe800-0xe81f] conflicts with ACPI region SMB0 [0xe800-0xe80f]
ACPI: Device needs an ACPI driver
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0xe460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
usb 1-2: new low speed USB device using uhci_hcd and address 2
cpuidle: using governor ladder
input: AT Translated Set 2 keyboard as /class/input/input4
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Asus Laptop ACPI Extras version 0.30
Marking TSC unstable due to TSC halts in idle
usb 1-2: New USB device found, idVendor=046d, idProduct=c00e
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB-PS/2 Optical Mouse
usb 1-2: Manufacturer: Logitech
usb 1-2: configuration #1 chosen from 1 choice
  L3C model detected, supported
input: Logitech USB-PS/2 Optical Mouse as /class/input/input5
Advanced Linux Sound Architecture Driver Version 1.0.18a.
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input6
intel8x0_measure_ac97_clock: measured 50919 usecs
intel8x0: clocking to 48000
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
ALSA device list:
  #0: Intel 82801CA-ICH3 with CS4299 at irq 11
  #1: Intel 82801CA-ICH3 Modem at irq 11
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
SCTP: Hash tables configured (established 65536 bind 65536)
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 260k freed
input: Video Bus as /class/input/input7
ACPI: Video Device [VGAC] (multi-head: yes  rom: no  post: no)
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xf8046000, 00:e0:18:b6:9d:31, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100'
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
ohci1394 0000:02:07.2: PCI INT C -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3]  MMIO=[d6000000-d60007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000305e5fc]
EXT3 FS on sda3, internal journal
Adding 1028152k swap on /dev/sda4.  Priority:-1 extents:1 across:1028152k 
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Clocksource tsc unstable (delta = -98061665 ns)
microcode: CPU0 updated from revision 0x0 to 0x39, date = 2003-06-04 

Re: [Bug #12410] resource map sanity check conflict: 0x7fffff00 0x800000ff 0x7ffff000 0x7fffffff ACPI Non-volatile Storage

[Rafael J. Wysocki]

On Monday 12 January 2009, Martin MOKREJ¦ wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.27 and 2.6.28.
> > 
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> > be listed and let me know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12410
> > Subject		: resource map sanity check conflict: 0x7fffff00 0x800000ff 0x7ffff000 0x7fffffff ACPI Non-volatile Storage
> > Submitter	: Martin MOKREJ¦ <mmokrejs-FKSC99mem8wheYDy1lqhK0JFmxxWawaa@public.gmane.org>
> > Date		: 2008-12-30 14:56 (13 days old)
> > References	: http://marc.info/?l=linux-kernel&m=123064945018849&w=4
> 
> The above bug is gone from 2.6.29-rc1.

Thanks for the update, the bug has been closed.

Rafael

[Bug #12409] NULL pointer dereference at get_stats()

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12409
Subject		: NULL pointer dereference at get_stats()
Submitter	: Tetsuo Handa <penguin-kernel-1yMVhJb1mP/7nzcFbJAaVXf5DAMn2ifp@public.gmane.org>
Date		: 2008-12-30 12:53 (13 days old)
References	: http://marc.info/?l=linux-kernel&m=123064167008695&w=4
Handled-By	: Frederik Deweerdt <frederik.deweerdt-kjvbsxwSFqI@public.gmane.org>

[Bug #12408] Funny problem with 2.6.28: Kernel stalls

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12408
Subject		: Funny problem with 2.6.28: Kernel stalls
Submitter	: Michael Roth <mroth-+8Z3Oe2AQjqzQB+pC5nmwQ@public.gmane.org>
Date		: 2008-12-25 15:14 (18 days old)
References	: http://marc.info/?l=linux-kernel&m=123021931714282&w=4

[Bug #12412] Regression in v2.6.28 introduced by: 'USB: skip Set-Interface(0) if already in altsetting 0'

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12412
Subject		: Regression in v2.6.28 introduced by: 'USB: skip Set-Interface(0) if already in altsetting 0'
Submitter	: Jan Scholz <scholz-wOpdxP1gw6Cc+IqHO83+wjjhTm2NLCe8@public.gmane.org>
Date		: 2009-01-02 11:04 (10 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=24c0996a6b73e2554104961afcc8659534503e0d
References	: http://marc.info/?l=linux-kernel&m=123089613601599&w=4

[Bug #12413] iwl3945 - Error for wireless request "Set Encode" (8B2A)

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12413
Subject		: iwl3945 - Error for wireless request "Set Encode" (8B2A)
Submitter	: Paul Rolland <rol-fjEKYshTNZ1eoWH0uzbU5w@public.gmane.org>
Date		: 2009-01-02 18:32 (10 days old)
References	: http://marc.info/?l=linux-kernel&m=123092155803366&w=4

Re: [Bug #12413] iwl3945 - Error for wireless request "Set Encode" (8B2A)

[Paul Rolland]

Hello Rafael,

On Sun, 11 Jan 2009 12:41:09 +0100 (CET)
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12413
> Subject		: iwl3945 - Error for wireless request "Set
> Encode" (8B2A) Submitter	: Paul Rolland <rol@witbe.net>
> Date		: 2009-01-02 18:32 (10 days old)
> References	: http://marc.info/?l=linux-kernel&m=123092155803366&w=4
> 

I'm still doing some tests... I've managed to turn on the Wifi interface
without getting this message, but I had to redo my .config, adding some
more options. Upgrading by using previous .config doesn't seem to be enough
to keep iw3945 working. You need to enable :
"Intel Wireless WiFi Next Gen AGN"

Now, I can associate, I can retrieve an IP address with DHCP and I can ping
the default GW (the AP in my case). But it seems something still odd with
routing... 

Paul

-- 
Paul Rolland                                E-Mail : rol(at)witbe.net
CTO - Witbe.net SA                          Tel. +33 (0)1 47 67 77 77
Les Collines de l'Arche                     Fax. +33 (0)1 47 67 77 99
F-92057 Paris La Defense                    RIPE : PR12-RIPE

Please no HTML, I'm not a browser - Pas d'HTML, je ne suis pas un
navigateur "Some people dream of success... while others wake up and work
hard at it" 

The rules of editing press releases are: 

1. Identify the crucial elements of the story.
2. Omit at least one of them.

   -- From a Slashdot.org post. We can only guess whether Microsoft
      uses this policy or not.

Re: [Bug #12413] iwl3945 - Error for wireless request "Set Encode" (8B2A)

[Paul Rolland]

Hello,

On Sun, 11 Jan 2009 12:41:09 +0100 (CET)
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> This message has been generated automatically as a part of a report
> of regressions introduced between 2.6.27 and 2.6.28.
> 
> The following bug entry is on the current list of known regressions
> introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> be listed and let me know (either way).
> 
> 
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12413
> Subject		: iwl3945 - Error for wireless request "Set
> Encode" (8B2A) Submitter	: Paul Rolland <rol@witbe.net>
> Date		: 2009-01-02 18:32 (10 days old)
> References	: http://marc.info/?l=linux-kernel&m=123092155803366&w=4
> 

This is fixed. Please consider it as a user-bug if you want. 
Anyway, the fix was to enable :
 
"Intel Wireless WiFi Next Gen AGN"

in addition to the already enabled support for the iwl3945. 
Not sure why we now need to enable both, but this solved the problem
for me.
Wifi is now fully functional.

Regards,
Paul


-- 
Paul Rolland                                E-Mail : rol(at)witbe.net
CTO - Witbe.net SA                          Tel. +33 (0)1 47 67 77 77
Les Collines de l'Arche                     Fax. +33 (0)1 47 67 77 99
F-92057 Paris La Defense                    RIPE : PR12-RIPE

Please no HTML, I'm not a browser - Pas d'HTML, je ne suis pas un
navigateur "Some people dream of success... while others wake up and work
hard at it" 

Excuse me, but didn't I tell you there's NO HOPE for the survival of
OFFSET PRINTING?

Re: [Bug #12413] iwl3945 - Error for wireless request "Set Encode" (8B2A)

[Rafael J. Wysocki]

On Sunday 11 January 2009, Paul Rolland wrote:
> Hello,
> 
> On Sun, 11 Jan 2009 12:41:09 +0100 (CET)
> "Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org> wrote:
> 
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.27 and 2.6.28.
> > 
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.27 and 2.6.28.  Please verify if it still should
> > be listed and let me know (either way).
> > 
> > 
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12413
> > Subject		: iwl3945 - Error for wireless request "Set
> > Encode" (8B2A) Submitter	: Paul Rolland <rol-fjEKYshTNZ1eoWH0uzbU5w@public.gmane.org>
> > Date		: 2009-01-02 18:32 (10 days old)
> > References	: http://marc.info/?l=linux-kernel&m=123092155803366&w=4
> > 
> 
> This is fixed. Please consider it as a user-bug if you want. 
> Anyway, the fix was to enable :
>  
> "Intel Wireless WiFi Next Gen AGN"
> 
> in addition to the already enabled support for the iwl3945. 
> Not sure why we now need to enable both, but this solved the problem
> for me.
> Wifi is now fully functional.

Thanks for the update, the bug has been closed.

Rafael

[Bug #12411] 2.6.28: BUG in r8169

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12411
Subject		: 2.6.28: BUG in r8169
Submitter	: Andrey Vul <andrey.vul-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date		: 2008-12-31 18:37 (12 days old)
References	: http://marc.info/?l=linux-kernel&m=123074869611409&w=4

[Bug #12426] TMDC Joystick no longer works in kernel 2.6.28

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of regressions introduced between 2.6.27 and 2.6.28.

The following bug entry is on the current list of known regressions
introduced between 2.6.27 and 2.6.28.  Please verify if it still should
be listed and let me know (either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12426
Subject		: TMDC Joystick no longer works in kernel 2.6.28
Submitter	: Andrew S. Johnson <andy-9eXmkf4BiQ2aMJb+Lgu22Q@public.gmane.org>
Date		: 2009-01-10 21:53 (2 days old)
References	: http://marc.info/?l=linux-kernel&m=123162486415366&w=4

2.6.28-rc9-git1: Reported regressions from 2.6.27

[Rafael J. Wysocki]

This message contains a list of some regressions from 2.6.27, for which there
are no fixes in the mainline I know of.  If any of them have been fixed already,
please let me know.

If you know of any other unresolved regressions from 2.6.27, please let me know
either and I'll add them to the list.  Also, please let me know if any of the
entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

  Date          Total  Pending  Unresolved
  ----------------------------------------
  2008-12-21      120       19          17
  2008-12-13      111       14          13
  2008-12-07      106       20          17
  2008-12-04      106       29          21
  2008-11-22       93       25          15
  2008-11-16       89       32          18
  2008-11-09       73       40          27
  2008-11-02       55       41          29
  2008-10-25       26       25          20


Unresolved regressions
----------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12265
Subject		: FPU emulation broken in 2.6.28-rc8 ?
Submitter	: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Date		: 2008-12-17 8:56 (4 days old)
References	: http://marc.info/?l=linux-kernel&m=122950463030747&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12264
Subject		: i915: switching from kwin in opengl mode to a VT then back to x11, x11 freezes
Submitter	: Caleb Cushing <xenoterracide@gmail.com>
Date		: 2008-12-16 11:40 (5 days old)
References	: http://marc.info/?l=linux-kernel&m=122942777030666&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12263
Subject		: Sata soft reset filling log
Submitter	: Justin Madru <bevicm@dslextreme.com>
Date		: 2008-12-13 2:07 (8 days old)
References	: http://marc.info/?l=linux-kernel&m=122913412608533&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12256
Subject		: [regression: 2.6.28] NFS client with locking fails
Submitter	: Kees Cook <kees@outflux.net>
Date		: 2008-12-19 13:38 (2 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12224
Subject		: journal activity on inactive partition causes inactive harddrive spinup
Submitter	: C Sights <csights@fastmail.fm>
Date		: 2008-12-14 11:39 (7 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c87591b719737b4e91eb1a9fa8fd55a4ff1886d6
Handled-By	: Eric Sandeen <sandeen@redhat.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12216
Subject		: Error when drm is loaded
Submitter	: François Valenduc <francois.valenduc@tvcablenet.be>
Date		: 2008-12-13 09:59 (8 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12210
Subject		: 2.6.28-rc8 big regression in VM
Submitter	: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Date		: 2008-12-12 18:38 (9 days old)
References	: http://marc.info/?l=linux-kernel&m=122910711005135&w=4
Handled-By	: Wu Fengguang <fengguang.wu@intel.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12209
Subject		: oldish top core dumps (in its meminfo() function)
Submitter	: Andreas Mohr <andi@lisas.de>
Date		: 2008-12-12 18:49 (9 days old)
References	: http://marc.info/?l=linux-kernel&m=122910784006472&w=4
		  http://marc.info/?l=linux-kernel&m=122907511319288&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12208
Subject		: uml is very slow on 2.6.28 host
Submitter	: Miklos Szeredi <miklos@szeredi.hu>
Date		: 2008-12-12 9:35 (9 days old)
References	: http://marc.info/?l=linux-kernel&m=122907463518593&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12195
Subject		: "dd" make kernel panic
Submitter	: alexs <alex.shi@intel.com>
Date		: 2008-12-10 18:07 (11 days old)
Handled-By	: James Bottomley <James.Bottomley@HansenPartnership.com>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12178
Subject		: Xorg crash at first start
Submitter	: Cédric Godin <cedric@belbone.be>
Date		: 2008-12-04 14:26 (17 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50
References	: http://marc.info/?l=linux-kernel&m=122840082828098&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12160
Subject		: networking oops after resume from s2ram (2.6.28-rc6)
Submitter	: Marcin Slusarz <marcin.slusarz@gmail.com>
Date		: 2008-11-28 21:15 (23 days old)
References	: http://marc.info/?l=linux-kernel&m=122790701615723&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12159
Subject		: 2.6.28-rc6-git1 -- No sound produced from Intel HDA ALSA driver
Submitter	: Miles Lane <miles.lane@gmail.com>
Date		: 2008-11-27 20:33 (24 days old)
References	: http://marc.info/?l=linux-kernel&m=122781805620212&w=4
Handled-By	: Takashi Iwai <tiwai@suse.de>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12156
Subject		: v2.6.28-rc2: x86_32 relocation regression?
Submitter	: Vegard Nossum <vegard.nossum@gmail.com>
Date		: 2008-11-24 21:19 (27 days old)
References	: http://marc.info/?l=linux-kernel&m=122756158220966&w=4


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12061
Subject		: snd_hda_intel: power_save: sound cracks on powerdown
Submitter	: Jens Weibler <bugzilla-kernel@jensthebrain.de>
Date		: 2008-11-18 12:07 (33 days old)
Handled-By	: Takashi Iwai <tiwai@suse.de>


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12028
Subject		: i915 DRM is broken in 2.6.28-rc4
Submitter	: Adam Tkac <vonsch@gmail.com>
Date		: 2008-11-14 01:50 (37 days old)


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11849
Subject		: default IRQ affinity change in v2.6.27 (breaking several SMP PPC based systems)
Submitter	: Kumar Gala <galak@kernel.crashing.org>
Date		: 2008-10-24 12:45 (58 days old)
References	: http://marc.info/?l=linux-kernel&m=122485245924125&w=4


Regressions with patches
------------------------

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12260
Subject		: Regression due to commit 2b80848e3818fb1c (p54usb: support LM87 firmwares)
Submitter	: Larry Finger <Larry.Finger@lwfinger.net>
Date		: 2008-12-20 10:45 (1 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2b80848e3818fb1c8ccddc105b065a86c68afa9d
Patch		: http://bugzilla.kernel.org/show_bug.cgi?id=12260


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12252
Subject		: new oops on resume due to ACPI_PREEMPTION_POINT()
Submitter	: Len Brown <len.brown@intel.com>
Date		: 2008-12-18 18:17 (3 days old)
Handled-By	: Len Brown <lenb@kernel.org>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=19370&action=view


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.27,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=11808

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Bug #12216] Error when drm is loaded

[Rafael J. Wysocki]

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.27.  Please verify if it still should be listed and let me know
(either way).


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12216
Subject		: Error when drm is loaded
Submitter	: François Valenduc <francois.valenduc-bmtTS95sd5BUM80lpFwj4w@public.gmane.org>
Date		: 2008-12-13 09:59 (8 days old)
First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50

Re: [Bug #12216] Error when drm is loaded

[François Valenduc]

Rafael J. Wysocki a écrit :
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.27.  Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12216
> Subject		: Error when drm is loaded
> Submitter	: François Valenduc <francois.valenduc@tvcablenet.be>
> Date		: 2008-12-13 09:59 (8 days old)
> First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50
>
>
>
>   
This bug still occurs. So, it still needs to be on the regression list.
I have not yet seen any replies to my bug report.

François Valenduc

Re: [Bug #12216] Error when drm is loaded

[Rafael J. Wysocki]

On Sunday, 21 of December 2008, François Valenduc wrote:
> Rafael J. Wysocki a écrit :
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.27.  Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12216
> > Subject		: Error when drm is loaded
> > Submitter	: François Valenduc <francois.valenduc-bmtTS95sd5BUM80lpFwj4w@public.gmane.org>
> > Date		: 2008-12-13 09:59 (8 days old)
> > First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50
> >
> >
> >
> >   
> This bug still occurs. So, it still needs to be on the regression list.
> I have not yet seen any replies to my bug report.

Thanks for the update.

Rafael

Re: [Bug #12216] Error when drm is loaded

[François Valenduc]

Rafael J. Wysocki a écrit :
> On Sunday, 21 of December 2008, François Valenduc wrote:
>   
>> Rafael J. Wysocki a écrit :
>>     
>>> This message has been generated automatically as a part of a report
>>> of recent regressions.
>>>
>>> The following bug entry is on the current list of known regressions
>>> from 2.6.27.  Please verify if it still should be listed and let me know
>>> (either way).
>>>
>>>
>>> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12216
>>> Subject		: Error when drm is loaded
>>> Submitter	: François Valenduc <francois.valenduc-bmtTS95sd5BUM80lpFwj4w@public.gmane.org>
>>> Date		: 2008-12-13 09:59 (8 days old)
>>> First-Bad-Commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=52440211dcdc52c0b757f8b34d122e11b12cdd50
>>>
>>>
>>>
>>>   
>>>       
>> This bug still occurs. So, it still needs to be on the regression list.
>> I have not yet seen any replies to my bug report.
>>     
>
> Thanks for the update.
>
> Rafael
>
>   
I got a reply to my bug report and I tested the patch provided by Dave
Airlie. It seems to solve the problem. The error doesn't occur anymore
when it's applied.

François