USB audio Gadget - code 10 error

USB audio Gadget - code 10 error

[anish singh]

adding alsa-devel

On Tue, Jun 4, 2013 at 10:35 PM, Eamon Hayden
<eamon.hayden@cloudiumsystems.com> wrote:
> I?m trying to use the linux usb audio gadget but I get the error : ?This
> device cannot start (code 10) when I connect to a windows 7/8 box. I don?t
> have this problem when I connect to ubunto 12.0.4
>
>
>
> I?m current using kernel 3.6.9, but have also had the issue with an older
> kernel (2.6.39.4).
>
>
>
> I?m not sure if this is an appropriate issue for this mail list, but I need
> to get a resolution to this...
>
>
>
> Thanks for your help.
>
> Eamon.
>
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>

[alsa-devel] USB audio Gadget - code 10 error

[Eamon Hayden]

I've tried both UAC1 and UAC2 at this stage and both give the same result.

-----Original Message-----
From: Jassi Brar [mailto:jassisinghbrar at gmail.com] 
Sent: Wednesday, June 05, 2013 4:29 AM
To: anish singh
Cc: Eamon Hayden; alsa-devel at alsa-project.org; kernelnewbies
Subject: Re: [alsa-devel] USB audio Gadget - code 10 error

> On Tue, Jun 4, 2013 at 10:35 PM, Eamon Hayden 
> <eamon.hayden@cloudiumsystems.com> wrote:
>> I?m trying to use the linux usb audio gadget but I get the error : 
>> ?This device cannot start (code 10) when I connect to a windows 7/8 
>> box. I don?t have this problem when I connect to ubunto 12.0.4
>>
You didn't tell if you are trying UAC1 or UAC2 ?  The latter won't work as such because iirc Windows don't support UAC2 natively (you'll have to load some 3rd part divers).

-j

[alsa-devel] USB audio Gadget - code 10 error

[Eamon Hayden]

Just to be sure...
I just downloaded a clean copy of kernel 3.6.9. 
I then configured it for UAC1 and the USB Audio Gadget. 
I rebuilt and installed the g_audio loadable module.

Again I get the 'This device cannot start (code 10)' Error when I connect windows 7.

My expectation is that that this should work with the default windows drivers - Is this correct.

Thanks for your help.
Eamon.

-----Original Message-----
From: kernelnewbies-bounces@kernelnewbies.org [mailto:kernelnewbies-bounces at kernelnewbies.org] On Behalf Of Eamon Hayden
Sent: Wednesday, June 05, 2013 8:42 AM
To: 'Jassi Brar'; 'anish singh'
Cc: alsa-devel at alsa-project.org; 'kernelnewbies'
Subject: RE: [alsa-devel] USB audio Gadget - code 10 error

I've tried both UAC1 and UAC2 at this stage and both give the same result.

-----Original Message-----
From: Jassi Brar [mailto:jassisinghbrar at gmail.com]
Sent: Wednesday, June 05, 2013 4:29 AM
To: anish singh
Cc: Eamon Hayden; alsa-devel at alsa-project.org; kernelnewbies
Subject: Re: [alsa-devel] USB audio Gadget - code 10 error

> On Tue, Jun 4, 2013 at 10:35 PM, Eamon Hayden 
> <eamon.hayden@cloudiumsystems.com> wrote:
>> I?m trying to use the linux usb audio gadget but I get the error : 
>> ?This device cannot start (code 10) when I connect to a windows 7/8 
>> box. I don?t have this problem when I connect to ubunto 12.0.4
>>
You didn't tell if you are trying UAC1 or UAC2 ?  The latter won't work as such because iirc Windows don't support UAC2 natively (you'll have to load some 3rd part divers).

-j


_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

[alsa-devel] USB audio Gadget - code 10 error

[Jonathan Neuschäfer]

On Wed, Jun 05, 2013 at 06:08:36PM +0100, Eamon Hayden wrote:
> Just to be sure...
> I just downloaded a clean copy of kernel 3.6.9. 
> I then configured it for UAC1 and the USB Audio Gadget. 
> I rebuilt and installed the g_audio loadable module.
> 
> Again I get the 'This device cannot start (code 10)' Error when I
> connect windows 7.
> 
> My expectation is that that this should work with the default windows
> drivers - Is this correct.

This seems to be a problem you have with Microsoft Windows 7, is that
correct?

Or do you rather get the error message 'This device cannot start (code
10)' on Linux? If so, please post a more complete error log.
Also, the output of "lsusb -v" might help.


HTH,
Jonathan Neusch?fer

[alsa-devel] USB audio Gadget - code 10 error

[Eamon Hayden]

Yes, I only have this problem with Windows (versions 7 and 8 are the ones I have tried).

I don't have this problem on Linux - or more specifically I don't have the issue on Ubunto 12.0.4

Is there anybody that has tried this with windows?

Thanks,
Eamon.

-----Original Message-----
From: Jonathan Neusch?fer [mailto:j.neuschaefer at gmx.net] 
Sent: Wednesday, June 05, 2013 7:46 PM
To: Eamon Hayden
Cc: 'Jassi Brar'; 'anish singh'; alsa-devel at alsa-project.org; 'kernelnewbies'
Subject: Re: [alsa-devel] USB audio Gadget - code 10 error

On Wed, Jun 05, 2013 at 06:08:36PM +0100, Eamon Hayden wrote:
> Just to be sure...
> I just downloaded a clean copy of kernel 3.6.9. 
> I then configured it for UAC1 and the USB Audio Gadget. 
> I rebuilt and installed the g_audio loadable module.
> 
> Again I get the 'This device cannot start (code 10)' Error when I 
> connect windows 7.
> 
> My expectation is that that this should work with the default windows 
> drivers - Is this correct.

This seems to be a problem you have with Microsoft Windows 7, is that correct?

Or do you rather get the error message 'This device cannot start (code 10)' on Linux? If so, please post a more complete error log.
Also, the output of "lsusb -v" might help.


HTH,
Jonathan Neusch?fer