* pmbus driver for x86
@ 2015-01-12 6:34 J.Hwan Kim
2015-01-12 15:31 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: J.Hwan Kim @ 2015-01-12 6:34 UTC (permalink / raw)
To: kernelnewbies
Hi,
My server (S2600CP) has BMC module and power supply with pmbus function.
When I try to control and monitor with pmbus driver in linux, it fails.
I connected oscilloscope to pmbus connector (SCL, SDA) pins, there was
no signal from pmbus driver.
But when the system went down, there are pmbus signals which may be
generated by BMC.
In x86 server, is pmbus connected only to BMC(ipmi)?
Is it not connected to CPU i2c bus?
is it impossible to monitor power supply with pmbus drvier?
Thanks in advance.
Regards,
J.Hwan Kim
^ permalink raw reply [flat|nested] 2+ messages in thread
* pmbus driver for x86
2015-01-12 6:34 pmbus driver for x86 J.Hwan Kim
@ 2015-01-12 15:31 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2015-01-12 15:31 UTC (permalink / raw)
To: kernelnewbies
On Mon, Jan 12, 2015 at 03:34:45PM +0900, J.Hwan Kim wrote:
> Hi,
> My server (S2600CP) has BMC module and power supply with pmbus function.
> When I try to control and monitor with pmbus driver in linux, it fails.
> I connected oscilloscope to pmbus connector (SCL, SDA) pins, there was
> no signal from pmbus driver.
> But when the system went down, there are pmbus signals which may be
> generated by BMC.
> In x86 server, is pmbus connected only to BMC(ipmi)?
> Is it not connected to CPU i2c bus?
> is it impossible to monitor power supply with pmbus drvier?
Why not ask on the lm-sensors mailing list, where the kernel sensor
developers are, that wrote this code? That would be the best place for
it.
good luck,
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-01-12 15:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-01-12 6:34 pmbus driver for x86 J.Hwan Kim
2015-01-12 15:31 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).