From: masneyb@onstation.org (Brian Masney)
To: kernelnewbies@lists.kernelnewbies.org
Subject: ks7010 firmware upload fail
Date: Mon, 5 Jun 2017 20:07:40 -0400 [thread overview]
Message-ID: <20170606000740.GA5645@3160d2e63219> (raw)
In-Reply-To: <20170605102444.GA31446@eros>
On Mon, Jun 05, 2017 at 08:24:44PM +1000, Tobin C. Harding wrote:
> On Mon, Jun 05, 2017 at 09:22:12AM +0200, Wolfram Sang wrote:
> > Tobin,
> >
> > > My question is should I be digging further into the MMC code or be doing
> > > something else with the driver code?
> >
> > So, you haven't found any branch that worked? No plain v4.9 or the
> > gen3-sdio branch from my tree?
>
> I have not tried cloning your tree. I am using the Rasperry Pi kernel
> source
>
> https://github.com/raspberrypi/linux
>
> which is v4.9.29
Hi Tobin,
Here are some instructions on how to compile an upstream kernel for a
Raspberry Pi: http://elinux.org/RPi_Upstream_Kernel_Compilation.
It describes setting up u-boot as the boot loader instead of the
boot loader that the Raspberry Pi kernel uses. One gotcha to be aware of
is that the config.txt file on the sd card won't be used.
Brian
next prev parent reply other threads:[~2017-06-06 0:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-05 2:56 ks7010 firmware upload fail Tobin C. Harding
2017-06-05 7:22 ` Wolfram Sang
2017-06-05 10:24 ` Tobin C. Harding
2017-06-06 0:07 ` Brian Masney [this message]
2017-06-06 2:34 ` Tobin C. Harding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170606000740.GA5645@3160d2e63219 \
--to=masneyb@onstation.org \
--cc=kernelnewbies@lists.kernelnewbies.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).