* building linux kernel 3.0.4
@ 2011-11-07 17:45 ashish anand
2011-11-07 19:04 ` Pritam Bankar
0 siblings, 1 reply; 3+ messages in thread
From: ashish anand @ 2011-11-07 17:45 UTC (permalink / raw)
To: kernelnewbies
Hi ,
I am using vmware on windows 7 and try to built kernel version 3.0.4 .
I am following this procedure
make defconfig
make
make modules
make modules_install
make install
Every step succeds except make install
Its throwing me following message
*sh /home/ashu/linux-3.0.4/linux-3.0.4/arch/x86/boot/install.sh 3.0.4
arch/x86/boot/bzImage \
System.map "/boot"
ERROR: modinfo: could not find module fuse
ERROR: modinfo: could not find module sunrpc
ERROR: modinfo: could not find module ip6t_REJECT
ERROR: modinfo: could not find module nf_conntrack_ipv6
ERROR: modinfo: could not find module ip6table_filter
ERROR: modinfo: could not find module ip6_tables
ERROR: modinfo: could not find module ipv6
ERROR: modinfo: could not find module uinput
ERROR: modinfo: could not find module snd_ens1371
ERROR: modinfo: could not find module gameport
ERROR: modinfo: could not find module snd_rawmidi
ERROR: modinfo: could not find module snd_ac97_codec
ERROR: modinfo: could not find module ac97_bus
ERROR: modinfo: could not find module snd_seq
ERROR: modinfo: could not find module snd_seq_device
ERROR: modinfo: could not find module snd_pcm
ERROR: modinfo: could not find module ppdev
ERROR: modinfo: could not find module snd_timer
ERROR: modinfo: could not find module parport_pc
ERROR: modinfo: could not find module snd
ERROR: modinfo: could not find module parport
ERROR: modinfo: could not find module microcode
ERROR: modinfo: could not find module soundcore
ERROR: modinfo: could not find module vmware_balloon
ERROR: modinfo: could not find module snd_page_alloc
ERROR: modinfo: could not find module pcnet32
ERROR: modinfo: could not find module mii
ERROR: modinfo: could not find module i2c_piix4
ERROR: modinfo: could not find module i2c_core
ERROR: modinfo: could not find module mptspi
ERROR: modinfo: could not find module mptscsih
ERROR: modinfo: could not find module mptbase
ERROR: modinfo: could not find module scsi_transport_spi
*I wonder if my Vmware workstation is creating a problem?
Or
If I am using make defconfig why are these modules not bulit.
Please help I am stuck.
Thanks and Regards
Ashish Anand
"Growth Should Not Kill Innovation"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20111107/94dc25a4/attachment.html
^ permalink raw reply [flat|nested] 3+ messages in thread* building linux kernel 3.0.4
2011-11-07 17:45 building linux kernel 3.0.4 ashish anand
@ 2011-11-07 19:04 ` Pritam Bankar
2011-11-08 13:49 ` Pritam Bankar
0 siblings, 1 reply; 3+ messages in thread
From: Pritam Bankar @ 2011-11-07 19:04 UTC (permalink / raw)
To: kernelnewbies
On 07-11-2011 23:15, ashish anand wrote:
> Hi ,
> I am using vmware on windows 7 and try to built kernel version 3.0.4 .
> I am following this procedure
>
> make defconfig
> make
> make modules
> make modules_install
> make install
> Every step succeds except make install
> Its throwing me following message
>
> *sh /home/ashu/linux-3.0.4/linux-3.0.4/arch/x86/boot/install.sh 3.0.4
> arch/x86/boot/bzImage \
> System.map "/boot"
> ERROR: modinfo: could not find module fuse
> ERROR: modinfo: could not find module sunrpc
> ERROR: modinfo: could not find module ip6t_REJECT
> ERROR: modinfo: could not find module nf_conntrack_ipv6
> ERROR: modinfo: could not find module ip6table_filter
> ERROR: modinfo: could not find module ip6_tables
> ERROR: modinfo: could not find module ipv6
> ERROR: modinfo: could not find module uinput
> ERROR: modinfo: could not find module snd_ens1371
> ERROR: modinfo: could not find module gameport
> ERROR: modinfo: could not find module snd_rawmidi
> ERROR: modinfo: could not find module snd_ac97_codec
> ERROR: modinfo: could not find module ac97_bus
> ERROR: modinfo: could not find module snd_seq
> ERROR: modinfo: could not find module snd_seq_device
> ERROR: modinfo: could not find module snd_pcm
> ERROR: modinfo: could not find module ppdev
> ERROR: modinfo: could not find module snd_timer
> ERROR: modinfo: could not find module parport_pc
> ERROR: modinfo: could not find module snd
> ERROR: modinfo: could not find module parport
> ERROR: modinfo: could not find module microcode
> ERROR: modinfo: could not find module soundcore
> ERROR: modinfo: could not find module vmware_balloon
> ERROR: modinfo: could not find module snd_page_alloc
> ERROR: modinfo: could not find module pcnet32
> ERROR: modinfo: could not find module mii
> ERROR: modinfo: could not find module i2c_piix4
> ERROR: modinfo: could not find module i2c_core
> ERROR: modinfo: could not find module mptspi
> ERROR: modinfo: could not find module mptscsih
> ERROR: modinfo: could not find module mptbase
> ERROR: modinfo: could not find module scsi_transport_spi
>
> *I wonder if my Vmware workstation is creating a problem?
>
> Or
> If I am using make defconfig why are these modules not bulit.
> Please help I am stuck.
>
> Thanks and Regards
> Ashish Anand
> "Growth Should Not Kill Innovation"
>
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
make defconfig takes default options present in config file of
particular architecture say x86_64 which is present in source code. Out
of these modules you might not be needing all. So try using make oldconfig.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20111108/e9a01394/attachment.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* building linux kernel 3.0.4
2011-11-07 19:04 ` Pritam Bankar
@ 2011-11-08 13:49 ` Pritam Bankar
0 siblings, 0 replies; 3+ messages in thread
From: Pritam Bankar @ 2011-11-08 13:49 UTC (permalink / raw)
To: kernelnewbies
make defconfig takes default options present in config file at (
arch/x86/configs/") of particular architecture say x86_64_defconfig
<http://lxr.linux.no/linux+*/arch/x86/configs/x86_64_defconfig> which is
present in source code. Out of these modules you might not be needing all.
So try using make oldconfig instead of make defconfig.
From: Pritam Bankar [mailto:pritambankar1988 at gmail.com]
Sent: 08 November 2011 00:35
To: kernelnewbies at kernelnewbies.org
Subject: Re: building linux kernel 3.0.4
On 07-11-2011 23:15, ashish anand wrote:
Hi ,
I am using vmware on windows 7 and try to built kernel version 3.0.4 .
I am following this procedure
make defconfig
make
make modules
make modules_install
make install
Every step succeds except make install
Its throwing me following message
sh /home/ashu/linux-3.0.4/linux-3.0.4/arch/x86/boot/install.sh 3.0.4
arch/x86/boot/bzImage \
System.map "/boot"
ERROR: modinfo: could not find module fuse
ERROR: modinfo: could not find module sunrpc
ERROR: modinfo: could not find module ip6t_REJECT
ERROR: modinfo: could not find module nf_conntrack_ipv6
ERROR: modinfo: could not find module ip6table_filter
ERROR: modinfo: could not find module ip6_tables
ERROR: modinfo: could not find module ipv6
ERROR: modinfo: could not find module uinput
ERROR: modinfo: could not find module snd_ens1371
ERROR: modinfo: could not find module gameport
ERROR: modinfo: could not find module snd_rawmidi
ERROR: modinfo: could not find module snd_ac97_codec
ERROR: modinfo: could not find module ac97_bus
ERROR: modinfo: could not find module snd_seq
ERROR: modinfo: could not find module snd_seq_device
ERROR: modinfo: could not find module snd_pcm
ERROR: modinfo: could not find module ppdev
ERROR: modinfo: could not find module snd_timer
ERROR: modinfo: could not find module parport_pc
ERROR: modinfo: could not find module snd
ERROR: modinfo: could not find module parport
ERROR: modinfo: could not find module microcode
ERROR: modinfo: could not find module soundcore
ERROR: modinfo: could not find module vmware_balloon
ERROR: modinfo: could not find module snd_page_alloc
ERROR: modinfo: could not find module pcnet32
ERROR: modinfo: could not find module mii
ERROR: modinfo: could not find module i2c_piix4
ERROR: modinfo: could not find module i2c_core
ERROR: modinfo: could not find module mptspi
ERROR: modinfo: could not find module mptscsih
ERROR: modinfo: could not find module mptbase
ERROR: modinfo: could not find module scsi_transport_spi
I wonder if my Vmware workstation is creating a problem?
Or
If I am using make defconfig why are these modules not bulit.
Please help I am stuck.
Thanks and Regards
Ashish Anand
"Growth Should Not Kill Innovation"
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
make defconfig takes default options present in config file of particular
architecture say x86_64 which is present in source code. Out of these
modules you might not be needing all. So try using make oldconfig.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20111108/fff44afd/attachment.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-11-08 13:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-11-07 17:45 building linux kernel 3.0.4 ashish anand
2011-11-07 19:04 ` Pritam Bankar
2011-11-08 13:49 ` Pritam Bankar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).