open image file

open image file

[horseriver]

hi:

  Is there mothod to look into a image file ?
  How can I know its filesystem?
  
  I have mounted my fd0 to /mnt with -t tmpfs ,but I find 
  nothing under /mnt.How can I touch the files in image?
    

thanks!

open image file

[Anuz Pratap Singh Tomar]

On Sun, Feb 3, 2013 at 2:03 AM, horseriver <horserivers@gmail.com> wrote:

> hi:
>
>   Is there mothod to look into a image file ?
>   How can I know its filesystem?
>
>   I have mounted my fd0 to /mnt with -t tmpfs ,but I find
>   nothing under /mnt.How can I touch the files in image?
>
> I think you need to mount it as loopback device
http://www.andremiller.net/content/mounting-hard-disk-image-including-partitions-using-linux

>
> thanks!
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>



-- 
Thank you
Warm Regards
Anuz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130203/19d8acc0/attachment.html 

open image file

[Zoltan Gyarmati]

On 02/03/2013 03:12 PM, Anuz Pratap Singh Tomar wrote:
>
>
> On Sun, Feb 3, 2013 at 2:03 AM, horseriver <horserivers@gmail.com 
> <mailto:horserivers@gmail.com>> wrote:
>
>     hi:
>
>       Is there mothod to look into a image file ?
>       How can I know its filesystem?
>
>       I have mounted my fd0 to /mnt with -t tmpfs ,but I find
>       nothing under /mnt.How can I touch the files in image?
>
> I think you need to mount it as loopback device
> http://www.andremiller.net/content/mounting-hard-disk-image-including-partitions-using-linux 
>
>
>
>     thanks!
>
>     _______________________________________________
>     Kernelnewbies mailing list
>     Kernelnewbies at kernelnewbies.org
>     <mailto:Kernelnewbies@kernelnewbies.org>
>     http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>
>
>
>
> -- 
> Thank you
> Warm Regards
> Anuz
>
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Hi,

in case of image with multiple partitions, easier to use kpartx, then 
get the offsets with parted:
http://ppadala.net/blog/2010/09/kpartx-to-mount-vm-disk-images/

of course with image with one partition, it doesn't matter

-- 
br,
Zoltan Gyarmati
mail: mr.zoltan.gyarmati at gmail.com
freenode nick: zgyarmati

open image file

[Greg Freemyer]

Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com> wrote:


>Hi,
>
>in case of image with multiple partitions, easier to use kpartx, then 
>get the offsets with parted:
>http://ppadala.net/blog/2010/09/kpartx-to-mount-vm-disk-images/
>
>of course with image with one partition, it doesn't matter

I think you meant an image of a drive with no partitions:

Ie.
 mkfs /dev/sdb. Create a filesystem on the entire disk, there is no offset and no partitions (the entire disk is the filesystem, no mbr or gpt).

 mkfs /dev/sdb1.  Create a filesystem on the first partition, there is an offset even if it is the only partition.  You examine the mbr or gpt to determine the offset.

Or possibly you meant an image of a partition:

dd if=/dev/sdb1 of=image_file.  Create the image of a partition, no offset needed for loopback mount.

Greg

-- 
Sent from my Android phone with K-9 Mail. Please excuse my brevity.

open image file

[Zoltan Gyarmati]

On 02/04/2013 03:03 PM, Greg Freemyer wrote:
>
> Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com> wrote:
>
>
>> Hi,
>>
>> in case of image with multiple partitions, easier to use kpartx, then
>> get the offsets with parted:
>> http://ppadala.net/blog/2010/09/kpartx-to-mount-vm-disk-images/
>>
>> of course with image with one partition, it doesn't matter
> I think you meant an image of a drive with no partitions:
>
> Ie.
>   mkfs /dev/sdb. Create a filesystem on the entire disk, there is no offset and no partitions (the entire disk is the filesystem, no mbr or gpt).
>
>   mkfs /dev/sdb1.  Create a filesystem on the first partition, there is an offset even if it is the only partition.  You examine the mbr or gpt to determine the offset.
>
> Or possibly you meant an image of a partition:
>
> dd if=/dev/sdb1 of=image_file.  Create the image of a partition, no offset needed for loopback mount.
>
> Greg
>
Indeed!
I was not accurate enough, thx for the comment.

-- 
br,
Zoltan Gyarmati
mail: mr.zoltan.gyarmati at gmail.com
freenode nick: zgyarmati

open image file

[horseriver]

hi:)

  I have a image file ,after I input this command:
  
  ******
  sh> losetup /dev/loop0 xx.img 
  sh>  mount -t tmpfs /dev/loop0 /mnt 

  ******


 I find no content under /mnt ,But this image file contains a bootloader.
 What is the reason ? How can I check out the file tree structure  of this image ?

thanks!

open image file

[Vineet Agarwal]

On Tue, Feb 5, 2013 at 12:46 AM, horseriver <horserivers@gmail.com> wrote:

> hi:)
>
>   I have a image file ,after I input this command:
>
>   ******
>   sh> losetup /dev/loop0 xx.img
>   sh>  mount -t tmpfs /dev/loop0 /mnt
>
>   ******
>
>
>  I find no content under /mnt ,But this image file contains a bootloader.
>  What is the reason ? How can I check out the file tree structure  of this
> image ?
>
>
Determine the file type of your image file.
I suspect you are trying to look into the initrd images. These image files
are compressed gzip images.

You can try extracting the image file then examine it's content.

gunzip -c <path_to_image_file> | cpio -id
The above command would extract the content of the image file in the
current directory.

Hope this solves your problem.

thanks!
>
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies at kernelnewbies.org
> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130205/84795851/attachment.html 

open image file

[horseriver]

hi:

  It is not a cpio archive , so that command can not work .
   
  its file system type is tmpfs.
  
thanks!

open image file

[Valdis.Kletnieks at vt.edu]

On Tue, 05 Feb 2013 04:59:42 +0800, horseriver said:
> hi:
>
>   It is not a cpio archive , so that command can not work .
>
>   its file system type is tmpfs.

Umm. No. It's not tmpfs.

tmpfs is a specific ram/swap based filesystem - basically, take enough
4K pages for the size= parameter and do it in memory.  Major user-visible
difference from the older 'ramfs' is that tmpfs pages can move to swap
space, and ramfs pages are nailed down in RAM.

mount -t tmpfs /dev/loop0 /mnt

This never actually looks at /dev/loop0 *at all*.  You could even say this:

mount -t tmpfs none /mnt

and it would work just fine.  Try leaving the '-t tmpfs' off entirely and
let the mount command figure out what type it is, and see if that works
any better for you.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 865 bytes
Desc: not available
Url : http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130205/70699028/attachment.bin