Writing driver for a net device which does not support interrupt

[freeman.zhang1992@gmail.com (Freeman Zhang)]

Hi phil,

Thanks for your reply! I googled timer, it might be a solution except
that interval granularity is a little bit large. This device is for high
performance network. I'm not sure whether the missmatch will cause problem.

And I just figured another potential solution, to use soft interrupt to
active NAPI. I will spend some time to varify these ideas.


Thanks again!
Freeman

-------- Original Message --------
> 
> 
> On 23/03/15 10:51, Freeman Zhang wrote:
>> I'm writing a net device driver for my final project in college. But the
>> half-finished device doesn't support interrupt yet(those hardware
>> guys...)
>>
>> So I'm wondering if there is some way to poll the device for its status
>> and events.
> 
> You should take a look at kernel timers, this is a rather old resource
> and was just the first hit in a google search but it should still be
> relevant.
> 
> http://www.ibm.com/developerworks/library/l-timers-list/
> 
> Kernel timers will sort of prepare you for interrupts i.e. a kernel
> timer will fire every $time_value and you can put your code which should
> normally run during an interrupt in the callback code.
> 
> I've used kernel timers to debug interrupts on our hardware devices,
> i.e. there have been times when the hardware has stopped raising
> interrupts and I've put timers in to cover this. For example a new
> firmware might work fine, but have completely broken interrupts or not
> fire interrupts often enough and timers can prove to the hardware guys
> that it's interrupts at fault ;)
> 
> hint: you might also want to look at tasklets and have your timer
> callback just call a tasklet.
> 
> Phil

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
Url : http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20150324/ce71afc6/attachment.bin