From: amitmahadik35@yahoo.com (Amit Mahadik)
To: kernelnewbies@lists.kernelnewbies.org
Subject: [MMC_SPI] Getting CRC error on CMD18 for MMC card on SPI
Date: Thu, 29 Dec 2016 11:12:32 +0000 (UTC) [thread overview]
Message-ID: <600104274.3573146.1483009952496@mail.yahoo.com> (raw)
In-Reply-To: 600104274.3573146.1483009952496.ref@mail.yahoo.com
Hello,? ? ? ? ? I am using ARM (CortexA9)development board which has SPI controller running at 6MHz. I want to interface MMC card on SPI bus. I have made changes to my board.c file to include the mmc_spi driver and mentioned the Chip select, mode (MODE 0) and frequency of operation (started with 40kHz). The initial card detection goes well. However, there are CRC errors when the block layer tries to read the partition table.I have attached log for reference. The card gets detected on Linux based system. The card is formatted with DOS partition (single partition).
Please help me regarding this issue.
Regards,Amit.?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161229/9e99b1af/attachment-0001.html
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: log.txt
Url: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20161229/9e99b1af/attachment-0001.txt
parent reply other threads:[~2016-12-29 11:12 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <600104274.3573146.1483009952496.ref@mail.yahoo.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=600104274.3573146.1483009952496@mail.yahoo.com \
--to=amitmahadik35@yahoo.com \
--cc=kernelnewbies@lists.kernelnewbies.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).