inittab is not executing after my Linux box boots up

[premdas.prajosh@gmail.com (Prajosh Premdas)]

Hi Dave and Mulyadi

Can you tell me where to place the previously generated RSA key. I even
suspected this but this line

*Starting dropbear sshd: generating rsa key... generating dsa key... OK*

and the OK pulled me off the track. One more thing can you tell me  what
does the OK mean there...

My mask is mask=255.0.0.0 so it is able to get the NFS server location

I typed a wrong command after changing the commands i find no difference

On Sun, Jun 19, 2011 at 11:22 PM, Dave Hylands <dhylands@gmail.com> wrote:

> Hi Projish,
>
> On Sun, Jun 19, 2011 at 8:24 AM, Prajosh Premdas
> <premdas.prajosh@gmail.com> wrote:
> > Hi
> > Please find the entire boot sequence here
> > RomBOOT
> ...snip...
> > TCP cubic registered
> > NET: Registered protocol family 17
> > rtc-at91sam9 at91_rtt.0: hctosys: unable to read the hardware clock
> > IP-Config: Guessing netmask 255.0.0.0
> > IP-Config: Complete:
> >      device=eth0, addr=10.220.4.200, mask=255.0.0.0, gw=10.220.4.35,
> >      host=10.220.4.200, domain=, nis-domain=(none),
> >      bootserver=255.255.255.255, rootserver=10.0.0.1, rootpath=
> > eth0: link up (100/Full)
> > VFS: Mounted root (nfs filesystem) on device 0:12.
>
> So it looks like your root file system was mounted successfully.
>
> > Freeing init memory: 128K
>
> All message from this point onwards come from init.
>
> > Starting network...
> > ip: RTNETLINK answers: File exists
> > Starting dropbear sshd: generating rsa key... generating dsa key... OK
>
> And since sshd is starting, it's actually processing stuff from your
> root file system.
>
> You may want to try disabling ssh. Generating the rsa key can take
> several minutes, depending on how fast your target is. So it may look
> like the system is hung, but it will actually continue to boot.
>
> You may want save away the generated RSA key and include it in your
> generated image so that this step is faster. For a given filesystem,
> it only happens the first time, and once the generated key is stored,
> ssh will just use the previously generated key. But if you're
> constantly rebuilding your filesystem without any generated keys then
> the first time you boot the new filesystem you'lll gget a long delay.
>
> --
> Dave Hylands
> Shuswap, BC, Canada
> http://www.davehylands.com
>



-- 
Regards,

Prajosh Premdas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20110620/81eacb27/attachment.html