Kexec Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: Alban Bedel <alban.bedel@avionic-design.de>
Cc: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>,
	kexec@lists.infradead.org
Subject: Re: [PATCH 1/3] arm: properly handle a missing /chosen node in the DT
Date: Tue, 5 Apr 2016 15:33:06 +0900	[thread overview]
Message-ID: <20160405063306.GA19694@verge.net.au> (raw)
In-Reply-To: <1459438260-8205-1-git-send-email-alban.bedel@avionic-design.de>

On Thu, Mar 31, 2016 at 05:30:58PM +0200, Alban Bedel wrote:
> From: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>
> 
> When adding a new node to the DT in the setup_dtb_prop function, the
> parent offset need be passed to fdt_add_subnode.  Currently a bogus
> error code is used.  Fix that by adding the parent offset as an extra
> function argument to setup_dtb_prop, and change the handling of the
> /chosen node to operate on a relative path plus (zero) offset instead of
> an absolute path.
> 
> Signed-off-by: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>

Hi,

I am struggling to see the problem that this patch tries to solve.

* Where and when is a bogus error code used?
* Why is a new parameter added to fdt_add_subnode and always passed as zero?
* If it is inappropriate to pass off to fdt_add_subnode() can
  that be resolved by simply passing 0 instead?

> ---
>  kexec/arch/arm/kexec-zImage-arm.c | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
> 
> diff --git a/kexec/arch/arm/kexec-zImage-arm.c b/kexec/arch/arm/kexec-zImage-arm.c
> index d85ab9b..78518fd 100644
> --- a/kexec/arch/arm/kexec-zImage-arm.c
> +++ b/kexec/arch/arm/kexec-zImage-arm.c
> @@ -257,8 +257,9 @@ int atag_arm_load(struct kexec_info *info, unsigned long base,
>  	return 0;
>  }
>  
> -static int setup_dtb_prop(char **bufp, off_t *sizep, const char *node_name,
> -		const char *prop_name, const void *val, int len)
> +static int setup_dtb_prop(char **bufp, off_t *sizep, int parentoffset,
> +		const char *node_name, const char *prop_name,
> +		const void *val, int len)
>  {
>  	char *dtb_buf;
>  	off_t dtb_size;
> @@ -273,14 +274,14 @@ static int setup_dtb_prop(char **bufp, off_t *sizep, const char *node_name,
>  	dtb_size = *sizep;
>  
>  	/* check if the subnode has already exist */
> -	off = fdt_path_offset(dtb_buf, node_name);
> +	off = fdt_subnode_offset(dtb_buf, parentoffset, node_name);
>  	if (off == -FDT_ERR_NOTFOUND) {
>  		dtb_size += fdt_node_len(node_name);
>  		fdt_set_totalsize(dtb_buf, dtb_size);
>  		dtb_buf = xrealloc(dtb_buf, dtb_size);
>  		if (dtb_buf == NULL)
>  			die("xrealloc failed\n");
> -		off = fdt_add_subnode(dtb_buf, off, node_name);
> +		off = fdt_add_subnode(dtb_buf, parentoffset, node_name);
>  	}
>  
>  	if (off < 0) {
> @@ -496,7 +497,7 @@ int zImage_arm_load(int argc, char **argv, const char *buf, off_t len,
>  				 *  Error should have been reported so
>  				 *  directly return -1
>  				 */
> -				if (setup_dtb_prop(&dtb_buf, &dtb_length, "/chosen",
> +				if (setup_dtb_prop(&dtb_buf, &dtb_length, 0, "chosen",
>  						"bootargs", command_line,
>  						strlen(command_line) + 1))
>  					return -1;
> @@ -542,11 +543,11 @@ int zImage_arm_load(int argc, char **argv, const char *buf, off_t len,
>  			start = cpu_to_be32((unsigned long)(initrd_base));
>  			end = cpu_to_be32((unsigned long)(initrd_base + initrd_size));
>  
> -			if (setup_dtb_prop(&dtb_buf, &dtb_length, "/chosen",
> +			if (setup_dtb_prop(&dtb_buf, &dtb_length, 0, "chosen",
>  					"linux,initrd-start", &start,
>  					sizeof(start)))
>  				return -1;
> -			if (setup_dtb_prop(&dtb_buf, &dtb_length, "/chosen",
> +			if (setup_dtb_prop(&dtb_buf, &dtb_length, 0, "chosen",
>  					"linux,initrd-end", &end,
>  					sizeof(end)))
>  				return -1;
> -- 
> 2.8.0
> 

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

  parent reply	other threads:[~2016-04-05  6:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-31 15:30 [PATCH 1/3] arm: properly handle a missing /chosen node in the DT Alban Bedel
2016-03-31 15:30 ` [PATCH 2/3] zImage-arm: Fix a return value check that use the wrong variable Alban Bedel
2016-03-31 15:31 ` [PATCH 3/3] zImage-arm: Add support for booting android images Alban Bedel
2016-04-05  6:33 ` Simon Horman [this message]
2016-04-05  9:34   ` [PATCH 1/3] arm: properly handle a missing /chosen node in the DT Nikolaus Schulz
2016-04-05  9:37     ` Nikolaus Schulz
2016-04-06  0:30     ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160405063306.GA19694@verge.net.au \
    --to=horms@verge.net.au \
    --cc=alban.bedel@avionic-design.de \
    --cc=kexec@lists.infradead.org \
    --cc=nikolaus.schulz@avionic-design.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox