* [PATCH 0/2] Kexec_file: Load kernel at top of system ram
@ 2018-03-22 3:37 Baoquan He
2018-03-22 3:37 ` [PATCH 1/2] resource: add walk_system_ram_res_rev() Baoquan He
` (2 more replies)
0 siblings, 3 replies; 17+ messages in thread
From: Baoquan He @ 2018-03-22 3:37 UTC (permalink / raw)
To: linux-kernel
Cc: prudo, Baoquan He, kexec, takahiro.akashi, ebiederm, akpm, dyoung,
vgoyal
The current kexec_file ignores kexec_buf.top_down value when call
arch_kexec_walk_mem() to allocate memory for loading kernel/initrd
stuffs. This is not supposed to be what kexec_buf.top_down is used
for.
In patch 0001, introduce a new function walk_system_ram_res_rev()
which is a variant of walk_system_ram_res(), walks through resources
of System RAM from top to down. And patch 0001 is picked from AKASHI's
patchset which adds arm64 kexec_file support. His next round of post
won't need walk_system_ram_res_rev any more, so I take it into this
patchset and use it in patch 0002.
In patch 0002, check kexec_buf.top_down in arch_kexec_walk_mem(),
if its value is 'true', call walk_system_ram_res_rev(). Otherwise
call walk_system_ram_res().
AKASHI Takahiro (1):
resource: add walk_system_ram_res_rev()
Baoquan He (1):
kexec_file: Load kernel at top of system RAM if required
include/linux/ioport.h | 3 +++
kernel/kexec_file.c | 2 ++
kernel/resource.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 68 insertions(+)
--
2.13.6
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-22 3:37 [PATCH 0/2] Kexec_file: Load kernel at top of system ram Baoquan He @ 2018-03-22 3:37 ` Baoquan He 2018-03-22 22:29 ` Andrew Morton 2018-03-22 3:37 ` [PATCH 2/2] kexec_file: Load kernel at top of system RAM if required Baoquan He 2018-03-22 22:38 ` [PATCH 0/2] Kexec_file: Load kernel at top of system ram Andrew Morton 2 siblings, 1 reply; 17+ messages in thread From: Baoquan He @ 2018-03-22 3:37 UTC (permalink / raw) To: linux-kernel Cc: prudo, Baoquan He, kexec, takahiro.akashi, ebiederm, akpm, dyoung, vgoyal From: AKASHI Takahiro <takahiro.akashi@linaro.org> This function, being a variant of walk_system_ram_res() introduced in commit 8c86e70acead ("resource: provide new functions to walk through resources"), walks through a list of all the resources of System RAM in reversed order, i.e., from higher to lower. It will be used in kexec_file code. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Baoquan He <bhe@redhat.com> --- include/linux/ioport.h | 3 +++ kernel/resource.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) diff --git a/include/linux/ioport.h b/include/linux/ioport.h index da0ebaec25f0..f12d95fe038b 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -277,6 +277,9 @@ extern int walk_system_ram_res(u64 start, u64 end, void *arg, int (*func)(struct resource *, void *)); extern int +walk_system_ram_res_rev(u64 start, u64 end, void *arg, + int (*func)(struct resource *, void *)); +extern int walk_iomem_res_desc(unsigned long desc, unsigned long flags, u64 start, u64 end, void *arg, int (*func)(struct resource *, void *)); diff --git a/kernel/resource.c b/kernel/resource.c index e270b5048988..f456fc95f1b2 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -23,6 +23,8 @@ #include <linux/pfn.h> #include <linux/mm.h> #include <linux/resource_ext.h> +#include <linux/string.h> +#include <linux/vmalloc.h> #include <asm/io.h> @@ -470,6 +472,67 @@ int walk_system_ram_res(u64 start, u64 end, void *arg, } /* + * This function, being a variant of walk_system_ram_res(), calls the @func + * callback against all memory ranges of type System RAM which are marked as + * IORESOURCE_SYSTEM_RAM and IORESOUCE_BUSY in reversed order, i.e., from + * higher to lower. + */ +int walk_system_ram_res_rev(u64 start, u64 end, void *arg, + int (*func)(struct resource *, void *)) +{ + struct resource res, *rams; + int rams_size = 16, i; + int ret = -1; + + /* create a list */ + rams = vmalloc(sizeof(struct resource) * rams_size); + if (!rams) + return ret; + + res.start = start; + res.end = end; + res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; + i = 0; + while ((res.start < res.end) && + (!find_next_iomem_res(&res, IORES_DESC_NONE, true))) { + if (i >= rams_size) { + /* re-alloc */ + struct resource *rams_new; + int rams_new_size; + + rams_new_size = rams_size + 16; + rams_new = vmalloc(sizeof(struct resource) + * rams_new_size); + if (!rams_new) + goto out; + + memcpy(rams_new, rams, + sizeof(struct resource) * rams_size); + vfree(rams); + rams = rams_new; + rams_size = rams_new_size; + } + + rams[i].start = res.start; + rams[i++].end = res.end; + + res.start = res.end + 1; + res.end = end; + } + + /* go reverse */ + for (i--; i >= 0; i--) { + ret = (*func)(&rams[i], arg); + if (ret) + break; + } + +out: + vfree(rams); + return ret; +} + +/* * This function calls the @func callback against all memory ranges, which * are ranges marked as IORESOURCE_MEM and IORESOUCE_BUSY. */ -- 2.13.6 _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-22 3:37 ` [PATCH 1/2] resource: add walk_system_ram_res_rev() Baoquan He @ 2018-03-22 22:29 ` Andrew Morton 2018-03-23 0:58 ` Baoquan He 0 siblings, 1 reply; 17+ messages in thread From: Andrew Morton @ 2018-03-22 22:29 UTC (permalink / raw) To: Baoquan He Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, dyoung, vgoyal On Thu, 22 Mar 2018 11:37:21 +0800 Baoquan He <bhe@redhat.com> wrote: > From: AKASHI Takahiro <takahiro.akashi@linaro.org> > > This function, being a variant of walk_system_ram_res() introduced in > commit 8c86e70acead ("resource: provide new functions to walk through > resources"), walks through a list of all the resources of System RAM > in reversed order, i.e., from higher to lower. > > It will be used in kexec_file code. > > ... > > --- a/kernel/resource.c > +++ b/kernel/resource.c > @@ -23,6 +23,8 @@ > #include <linux/pfn.h> > #include <linux/mm.h> > #include <linux/resource_ext.h> > +#include <linux/string.h> > +#include <linux/vmalloc.h> > #include <asm/io.h> > > > @@ -470,6 +472,67 @@ int walk_system_ram_res(u64 start, u64 end, void *arg, > } > > /* > + * This function, being a variant of walk_system_ram_res(), calls the @func > + * callback against all memory ranges of type System RAM which are marked as > + * IORESOURCE_SYSTEM_RAM and IORESOUCE_BUSY in reversed order, i.e., from > + * higher to lower. > + */ This should document the return value, as should walk_system_ram_res(). Why does it return -1 on error rather than an errno (ENOMEM)? > +int walk_system_ram_res_rev(u64 start, u64 end, void *arg, > + int (*func)(struct resource *, void *)) > +{ > + struct resource res, *rams; > + int rams_size = 16, i; > + int ret = -1; > + > + /* create a list */ > + rams = vmalloc(sizeof(struct resource) * rams_size); > + if (!rams) > + return ret; > + > + res.start = start; > + res.end = end; > + res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; > + i = 0; > + while ((res.start < res.end) && > + (!find_next_iomem_res(&res, IORES_DESC_NONE, true))) { > + if (i >= rams_size) { > + /* re-alloc */ > + struct resource *rams_new; > + int rams_new_size; > + > + rams_new_size = rams_size + 16; > + rams_new = vmalloc(sizeof(struct resource) > + * rams_new_size); > + if (!rams_new) > + goto out; > + > + memcpy(rams_new, rams, > + sizeof(struct resource) * rams_size); > + vfree(rams); > + rams = rams_new; > + rams_size = rams_new_size; > + } > + > + rams[i].start = res.start; > + rams[i++].end = res.end; > + > + res.start = res.end + 1; > + res.end = end; > + } > + > + /* go reverse */ > + for (i--; i >= 0; i--) { > + ret = (*func)(&rams[i], arg); > + if (ret) > + break; > + } erk, this is pretty nasty. Isn't there a better way :( > +out: > + vfree(rams); > + return ret; > +} _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-22 22:29 ` Andrew Morton @ 2018-03-23 0:58 ` Baoquan He 2018-03-23 2:06 ` Andrew Morton 0 siblings, 1 reply; 17+ messages in thread From: Baoquan He @ 2018-03-23 0:58 UTC (permalink / raw) To: Andrew Morton Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, dyoung, vgoyal Hi Andrew, Thanks a lot for your reviewing! On 03/22/18 at 03:29pm, Andrew Morton wrote: > > /* > > + * This function, being a variant of walk_system_ram_res(), calls the @func > > + * callback against all memory ranges of type System RAM which are marked as > > + * IORESOURCE_SYSTEM_RAM and IORESOUCE_BUSY in reversed order, i.e., from > > + * higher to lower. > > + */ > > This should document the return value, as should walk_system_ram_res(). > Why does it return -1 on error rather than an errno (ENOMEM)? OK, will add sentences to tell this. So for walk_system_ram_res() only '-1' indicates the failure of finding, '0' the success. While in walk_system_ram_res_rev(), add '-ENOMEM' to indicate failure of vmalloc allocation. > > > +int walk_system_ram_res_rev(u64 start, u64 end, void *arg, > > + int (*func)(struct resource *, void *)) > > +{ > > + struct resource res, *rams; > > + int rams_size = 16, i; > > + int ret = -1; > > + > > + /* create a list */ > > + rams = vmalloc(sizeof(struct resource) * rams_size); > > + if (!rams) > > + return ret; > > + > > + res.start = start; > > + res.end = end; > > + res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; > > + i = 0; > > + while ((res.start < res.end) && > > + (!find_next_iomem_res(&res, IORES_DESC_NONE, true))) { > > + if (i >= rams_size) { > > + /* re-alloc */ > > + struct resource *rams_new; > > + int rams_new_size; > > + > > + rams_new_size = rams_size + 16; > > + rams_new = vmalloc(sizeof(struct resource) > > + * rams_new_size); > > + if (!rams_new) > > + goto out; > > + > > + memcpy(rams_new, rams, > > + sizeof(struct resource) * rams_size); > > + vfree(rams); > > + rams = rams_new; > > + rams_size = rams_new_size; > > + } > > + > > + rams[i].start = res.start; > > + rams[i++].end = res.end; > > + > > + res.start = res.end + 1; > > + res.end = end; > > + } > > + > > + /* go reverse */ > > + for (i--; i >= 0; i--) { > > + ret = (*func)(&rams[i], arg); > > + if (ret) > > + break; > > + } > > erk, this is pretty nasty. Isn't there a better way :( Yes, this is not efficient. In struct resource{}, ->sibling list is a singly linked list. I ever thought about changing it to doubly linked list, yet not very sure if it will have effect since struct resource is a core data structure. AKASHI's method is more acceptable, and currently only kexec has this requirement. > > > +out: > > + vfree(rams); > > + return ret; > > +} > _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-23 0:58 ` Baoquan He @ 2018-03-23 2:06 ` Andrew Morton 2018-03-23 3:10 ` Baoquan He 0 siblings, 1 reply; 17+ messages in thread From: Andrew Morton @ 2018-03-23 2:06 UTC (permalink / raw) To: Baoquan He Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, dyoung, vgoyal On Fri, 23 Mar 2018 08:58:45 +0800 Baoquan He <bhe@redhat.com> wrote: > > erk, this is pretty nasty. Isn't there a better way :( > > Yes, this is not efficient. > > In struct resource{}, ->sibling list is a singly linked list. I ever > thought about changing it to doubly linked list, yet not very sure if > it will have effect since struct resource is a core data structure. Switching to a list_head sounds OK. The only issue really is memory consumption and surely we don't have tens of thousands of struct resources floating about(?). Or if we do have a lot, the machine is presumably huge (hope?). > AKASHI's method is more acceptable, and currently only kexec has this > requirement. What method is that? _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-23 2:06 ` Andrew Morton @ 2018-03-23 3:10 ` Baoquan He 2018-03-23 20:06 ` Andrew Morton 0 siblings, 1 reply; 17+ messages in thread From: Baoquan He @ 2018-03-23 3:10 UTC (permalink / raw) To: Andrew Morton Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, dyoung, vgoyal On 03/22/18 at 07:06pm, Andrew Morton wrote: > On Fri, 23 Mar 2018 08:58:45 +0800 Baoquan He <bhe@redhat.com> wrote: > > > > erk, this is pretty nasty. Isn't there a better way :( > > > > Yes, this is not efficient. > > > > In struct resource{}, ->sibling list is a singly linked list. I ever > > thought about changing it to doubly linked list, yet not very sure if > > it will have effect since struct resource is a core data structure. > > Switching to a list_head sounds OK. The only issue really is memory > consumption and surely we don't have tens of thousands of struct > resources floating about(?). Or if we do have a lot, the machine is > presumably huge (hope?). Yes. It doubles the memory consumption. AFAIK, the biggest number of resrouces I heard of possibly is mentioned in this user space kexec_tools commit. In this commit, Xunlei told on SGI system with 64TB RAM, the array which we have been using to store "System RAM"|"Reserved"|"ACPI **" regions is not big enough. In that case, we need extra 8Byte*2048=16KB at most. With my understanding, this increase is system wide, since each resource instance only needs its own list_head member, right? commit 4a6d67d9e938a7accf128aff23f8ad4bda67f729 Author: Xunlei Pang <xlpang@redhat.com> Date: Thu Mar 23 19:16:59 2017 +0800 x86: Support large number of memory ranges We got a problem on one SGI 64TB machine, the current kexec-tools failed to work due to the insufficient ranges(MAX_MEMORY_RANGES) allowed which is defined as 1024(less than the ranges on the machine). The kcore header is insufficient due to the same reason as well. To solve this, this patch simply doubles "MAX_MEMORY_RANGES" and "KCORE_ELF_HEADERS_SIZE". Signed-off-by: Xunlei Pang <xlpang@redhat.com> Tested-by: Frank Ramsay <frank.ramsay@hpe.com> Signed-off-by: Simon Horman <horms@verge.net.au> diff --git a/kexec/arch/i386/kexec-x86.h b/kexec/arch/i386/kexec-x86.h index 33df352..51855f8 100644 --- a/kexec/arch/i386/kexec-x86.h +++ b/kexec/arch/i386/kexec-x86.h @@ -1,7 +1,7 @@ #ifndef KEXEC_X86_H #define KEXEC_X86_H -#define MAX_MEMORY_RANGES 1024 +#define MAX_MEMORY_RANGES 2048 > > > AKASHI's method is more acceptable, and currently only kexec has this > > requirement. > > What method is that? I meant this patch is made by AKASHI, he posted a patchset to add kexec_file support for arm64. Among those patches this one is used to arm64 kernel at top of system RAM. Later they change a different way to search memory region to load kernel, so he dropped this patch. _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-23 3:10 ` Baoquan He @ 2018-03-23 20:06 ` Andrew Morton 2018-03-24 13:33 ` Baoquan He 0 siblings, 1 reply; 17+ messages in thread From: Andrew Morton @ 2018-03-23 20:06 UTC (permalink / raw) To: Baoquan He Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, dyoung, vgoyal On Fri, 23 Mar 2018 11:10:13 +0800 Baoquan He <bhe@redhat.com> wrote: > On 03/22/18 at 07:06pm, Andrew Morton wrote: > > On Fri, 23 Mar 2018 08:58:45 +0800 Baoquan He <bhe@redhat.com> wrote: > > > > > > erk, this is pretty nasty. Isn't there a better way :( > > > > > > Yes, this is not efficient. > > > > > > In struct resource{}, ->sibling list is a singly linked list. I ever > > > thought about changing it to doubly linked list, yet not very sure if > > > it will have effect since struct resource is a core data structure. > > > > Switching to a list_head sounds OK. The only issue really is memory > > consumption and surely we don't have tens of thousands of struct > > resources floating about(?). Or if we do have a lot, the machine is > > presumably huge (hope?). > > Yes. It doubles the memory consumption. > > AFAIK, the biggest number of resrouces I heard of possibly is mentioned > in this user space kexec_tools commit. In this commit, Xunlei told on > SGI system with 64TB RAM, the array which we have been using to store > "System RAM"|"Reserved"|"ACPI **" regions is not big enough. In that > case, we need extra 8Byte*2048=16KB at most. With my understanding, this > increase is system wide, since each resource instance only needs its own > list_head member, right? Yes. That sounds perfectly acceptable. It would be interesting to see what this approach looks like, if you have time to toss something together? _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-23 20:06 ` Andrew Morton @ 2018-03-24 13:33 ` Baoquan He 2018-03-24 16:13 ` Wei Yang 0 siblings, 1 reply; 17+ messages in thread From: Baoquan He @ 2018-03-24 13:33 UTC (permalink / raw) To: Andrew Morton Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, dyoung, vgoyal On 03/23/18 at 01:06pm, Andrew Morton wrote: > On Fri, 23 Mar 2018 11:10:13 +0800 Baoquan He <bhe@redhat.com> wrote: > > > On 03/22/18 at 07:06pm, Andrew Morton wrote: > > > On Fri, 23 Mar 2018 08:58:45 +0800 Baoquan He <bhe@redhat.com> wrote: > > > > > > > > erk, this is pretty nasty. Isn't there a better way :( > > > > > > > > Yes, this is not efficient. > > > > > > > > In struct resource{}, ->sibling list is a singly linked list. I ever > > > > thought about changing it to doubly linked list, yet not very sure if > > > > it will have effect since struct resource is a core data structure. > > > > > > Switching to a list_head sounds OK. The only issue really is memory > > > consumption and surely we don't have tens of thousands of struct > > > resources floating about(?). Or if we do have a lot, the machine is > > > presumably huge (hope?). > > > > Yes. It doubles the memory consumption. > > > > AFAIK, the biggest number of resrouces I heard of possibly is mentioned > > in this user space kexec_tools commit. In this commit, Xunlei told on > > SGI system with 64TB RAM, the array which we have been using to store > > "System RAM"|"Reserved"|"ACPI **" regions is not big enough. In that > > case, we need extra 8Byte*2048=16KB at most. With my understanding, this > > increase is system wide, since each resource instance only needs its own > > list_head member, right? > > Yes. That sounds perfectly acceptable. > > It would be interesting to see what this approach looks like, if you > have time to toss something together? OK, will make patches for reviewing. Thanks! _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-24 13:33 ` Baoquan He @ 2018-03-24 16:13 ` Wei Yang 2018-03-26 14:30 ` Baoquan He 0 siblings, 1 reply; 17+ messages in thread From: Wei Yang @ 2018-03-24 16:13 UTC (permalink / raw) To: Baoquan He Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, Andrew Morton, dyoung, vgoyal On Sat, Mar 24, 2018 at 09:33:30PM +0800, Baoquan He wrote: >> >> Yes. That sounds perfectly acceptable. >> >> It would be interesting to see what this approach looks like, if you >> have time to toss something together? > >OK, will make patches for reviewing. Thanks! Hi, Baoquan, Andrew I have come up with an implementation for top-down search the ram resources. Hope this would meet your need. From b36d50487f1d4e4d6a5103965a27101b3121e0ea Mon Sep 17 00:00:00 2001 From: Wei Yang <richard.weiyang@gmail.com> Date: Sat, 24 Mar 2018 23:25:46 +0800 Subject: [PATCH] kernel/resource: add walk_system_ram_res_rev() As discussed on https://patchwork.kernel.org/patch/10300819/, this patch comes up with a variant implementation of walk_system_ram_res_rev(), which uses iteration instead of allocating array to store those resources. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> --- include/linux/ioport.h | 3 ++ kernel/resource.c | 113 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 116 insertions(+) diff --git a/include/linux/ioport.h b/include/linux/ioport.h index da0ebaec25f0..473f1d9cb97e 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -277,6 +277,9 @@ extern int walk_system_ram_res(u64 start, u64 end, void *arg, int (*func)(struct resource *, void *)); extern int +walk_system_ram_res_rev(u64 start, u64 end, void *arg, + int (*func)(struct resource *, void *)); +extern int walk_iomem_res_desc(unsigned long desc, unsigned long flags, u64 start, u64 end, void *arg, int (*func)(struct resource *, void *)); diff --git a/kernel/resource.c b/kernel/resource.c index 769109f20fb7..ddf6b4c41498 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -73,6 +73,38 @@ static struct resource *next_resource(struct resource *p, bool sibling_only) return p->sibling; } +static struct resource *prev_resource(struct resource *p, bool sibling_only) +{ + struct resource *prev; + if (NULL == iomem_resource.child) + return NULL; + + if (p == NULL) { + prev = iomem_resource.child; + while (prev->sibling) + prev = prev->sibling; + } else { + if (p->parent->child == p) { + return p->parent; + } + + for (prev = p->parent->child; prev->sibling != p; + prev = prev->sibling) {} + } + + /* Caller wants to traverse through siblings only */ + if (sibling_only) + return prev; + + for (;prev->child;) { + prev = prev->child; + + while (prev->sibling) + prev = prev->sibling; + } + return prev; +} + static void *r_next(struct seq_file *m, void *v, loff_t *pos) { struct resource *p = v; @@ -401,6 +433,47 @@ static int find_next_iomem_res(struct resource *res, unsigned long desc, return 0; } +/* + * Finds the highest iomem resource existing within [res->start.res->end). + * The caller must specify res->start, res->end, res->flags, and optionally + * desc. If found, returns 0, res is overwritten, if not found, returns -1. + * This function walks the whole tree and not just first level children until + * and unless first_level_children_only is true. + */ +static int find_prev_iomem_res(struct resource *res, unsigned long desc, + bool first_level_children_only) +{ + struct resource *p; + + BUG_ON(!res); + BUG_ON(res->start >= res->end); + + read_lock(&resource_lock); + + for (p = prev_resource(NULL, first_level_children_only); p; + p = prev_resource(p, first_level_children_only)) { + if ((p->flags & res->flags) != res->flags) + continue; + if ((desc != IORES_DESC_NONE) && (desc != p->desc)) + continue; + if (p->end < res->start) { + p = NULL; + break; + } + if ((p->end >= res->start) && (p->start < res->end)) + break; + } + + read_unlock(&resource_lock); + if (!p) + return -1; + /* copy data */ + resource_clip(res, p->start, p->end); + res->flags = p->flags; + res->desc = p->desc; + return 0; +} + static int __walk_iomem_res_desc(struct resource *res, unsigned long desc, bool first_level_children_only, void *arg, @@ -422,6 +495,27 @@ static int __walk_iomem_res_desc(struct resource *res, unsigned long desc, return ret; } +static int __walk_iomem_res_rev_desc(struct resource *res, unsigned long desc, + bool first_level_children_only, + void *arg, + int (*func)(struct resource *, void *)) +{ + u64 orig_start = res->start; + int ret = -1; + + while ((res->start < res->end) && + !find_prev_iomem_res(res, desc, first_level_children_only)) { + ret = (*func)(res, arg); + if (ret) + break; + + res->end = res->start - 1; + res->start = orig_start; + } + + return ret; +} + /* * Walks through iomem resources and calls func() with matching resource * ranges. This walks through whole tree and not just first level children. @@ -468,6 +562,25 @@ int walk_system_ram_res(u64 start, u64 end, void *arg, arg, func); } +/* + * This function, being a variant of walk_system_ram_res(), calls the @func + * callback against all memory ranges of type System RAM which are marked as + * IORESOURCE_SYSTEM_RAM and IORESOUCE_BUSY in reversed order, i.e., from + * higher to lower. + */ +int walk_system_ram_res_rev(u64 start, u64 end, void *arg, + int (*func)(struct resource *, void *)) +{ + struct resource res; + + res.start = start; + res.end = end; + res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; + + return __walk_iomem_res_rev_desc(&res, IORES_DESC_NONE, true, + arg, func); +} + /* * This function calls the @func callback against all memory ranges, which * are ranges marked as IORESOURCE_MEM and IORESOUCE_BUSY. -- 2.15.1 -- Wei Yang Help you, Help me _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-24 16:13 ` Wei Yang @ 2018-03-26 14:30 ` Baoquan He 2018-03-26 15:04 ` Wei Yang 0 siblings, 1 reply; 17+ messages in thread From: Baoquan He @ 2018-03-26 14:30 UTC (permalink / raw) To: Wei Yang Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, Andrew Morton, dyoung, vgoyal Hi Wei Yang, On 03/25/18 at 12:13am, Wei Yang wrote: > On Sat, Mar 24, 2018 at 09:33:30PM +0800, Baoquan He wrote: > >> > >> Yes. That sounds perfectly acceptable. > >> > >> It would be interesting to see what this approach looks like, if you > >> have time to toss something together? > > > >OK, will make patches for reviewing. Thanks! > > Hi, Baoquan, Andrew > > I have come up with an implementation for top-down search the ram resources. > Hope this would meet your need. Thanks for telling and your effort. Glad to know I am not the only buyer of walk_system_ram_res_rev. I am fine with other ways to make it, people can compare them and know which one is better. I am working to use the list_head instead, the doubly linked list way as Andrew suggested. Andrew and other people can help make a choice. It won't be long. Thanks Baoquan > > From b36d50487f1d4e4d6a5103965a27101b3121e0ea Mon Sep 17 00:00:00 2001 > From: Wei Yang <richard.weiyang@gmail.com> > Date: Sat, 24 Mar 2018 23:25:46 +0800 > Subject: [PATCH] kernel/resource: add walk_system_ram_res_rev() > > As discussed on https://patchwork.kernel.org/patch/10300819/, this patch > comes up with a variant implementation of walk_system_ram_res_rev(), which > uses iteration instead of allocating array to store those resources. > > Signed-off-by: Wei Yang <richard.weiyang@gmail.com> > --- > include/linux/ioport.h | 3 ++ > kernel/resource.c | 113 +++++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 116 insertions(+) > > diff --git a/include/linux/ioport.h b/include/linux/ioport.h > index da0ebaec25f0..473f1d9cb97e 100644 > --- a/include/linux/ioport.h > +++ b/include/linux/ioport.h > @@ -277,6 +277,9 @@ extern int > walk_system_ram_res(u64 start, u64 end, void *arg, > int (*func)(struct resource *, void *)); > extern int > +walk_system_ram_res_rev(u64 start, u64 end, void *arg, > + int (*func)(struct resource *, void *)); > +extern int > walk_iomem_res_desc(unsigned long desc, unsigned long flags, u64 start, u64 end, > void *arg, int (*func)(struct resource *, void *)); > > diff --git a/kernel/resource.c b/kernel/resource.c > index 769109f20fb7..ddf6b4c41498 100644 > --- a/kernel/resource.c > +++ b/kernel/resource.c > @@ -73,6 +73,38 @@ static struct resource *next_resource(struct resource *p, bool sibling_only) > return p->sibling; > } > > +static struct resource *prev_resource(struct resource *p, bool sibling_only) > +{ > + struct resource *prev; > + if (NULL == iomem_resource.child) > + return NULL; > + > + if (p == NULL) { > + prev = iomem_resource.child; > + while (prev->sibling) > + prev = prev->sibling; > + } else { > + if (p->parent->child == p) { > + return p->parent; > + } > + > + for (prev = p->parent->child; prev->sibling != p; > + prev = prev->sibling) {} > + } > + > + /* Caller wants to traverse through siblings only */ > + if (sibling_only) > + return prev; > + > + for (;prev->child;) { > + prev = prev->child; > + > + while (prev->sibling) > + prev = prev->sibling; > + } > + return prev; > +} > + > static void *r_next(struct seq_file *m, void *v, loff_t *pos) > { > struct resource *p = v; > @@ -401,6 +433,47 @@ static int find_next_iomem_res(struct resource *res, unsigned long desc, > return 0; > } > > +/* > + * Finds the highest iomem resource existing within [res->start.res->end). > + * The caller must specify res->start, res->end, res->flags, and optionally > + * desc. If found, returns 0, res is overwritten, if not found, returns -1. > + * This function walks the whole tree and not just first level children until > + * and unless first_level_children_only is true. > + */ > +static int find_prev_iomem_res(struct resource *res, unsigned long desc, > + bool first_level_children_only) > +{ > + struct resource *p; > + > + BUG_ON(!res); > + BUG_ON(res->start >= res->end); > + > + read_lock(&resource_lock); > + > + for (p = prev_resource(NULL, first_level_children_only); p; > + p = prev_resource(p, first_level_children_only)) { > + if ((p->flags & res->flags) != res->flags) > + continue; > + if ((desc != IORES_DESC_NONE) && (desc != p->desc)) > + continue; > + if (p->end < res->start) { > + p = NULL; > + break; > + } > + if ((p->end >= res->start) && (p->start < res->end)) > + break; > + } > + > + read_unlock(&resource_lock); > + if (!p) > + return -1; > + /* copy data */ > + resource_clip(res, p->start, p->end); > + res->flags = p->flags; > + res->desc = p->desc; > + return 0; > +} > + > static int __walk_iomem_res_desc(struct resource *res, unsigned long desc, > bool first_level_children_only, > void *arg, > @@ -422,6 +495,27 @@ static int __walk_iomem_res_desc(struct resource *res, unsigned long desc, > return ret; > } > > +static int __walk_iomem_res_rev_desc(struct resource *res, unsigned long desc, > + bool first_level_children_only, > + void *arg, > + int (*func)(struct resource *, void *)) > +{ > + u64 orig_start = res->start; > + int ret = -1; > + > + while ((res->start < res->end) && > + !find_prev_iomem_res(res, desc, first_level_children_only)) { > + ret = (*func)(res, arg); > + if (ret) > + break; > + > + res->end = res->start - 1; > + res->start = orig_start; > + } > + > + return ret; > +} > + > /* > * Walks through iomem resources and calls func() with matching resource > * ranges. This walks through whole tree and not just first level children. > @@ -468,6 +562,25 @@ int walk_system_ram_res(u64 start, u64 end, void *arg, > arg, func); > } > > +/* > + * This function, being a variant of walk_system_ram_res(), calls the @func > + * callback against all memory ranges of type System RAM which are marked as > + * IORESOURCE_SYSTEM_RAM and IORESOUCE_BUSY in reversed order, i.e., from > + * higher to lower. > + */ > +int walk_system_ram_res_rev(u64 start, u64 end, void *arg, > + int (*func)(struct resource *, void *)) > +{ > + struct resource res; > + > + res.start = start; > + res.end = end; > + res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; > + > + return __walk_iomem_res_rev_desc(&res, IORES_DESC_NONE, true, > + arg, func); > +} > + > /* > * This function calls the @func callback against all memory ranges, which > * are ranges marked as IORESOURCE_MEM and IORESOUCE_BUSY. > -- > 2.15.1 > > > -- > Wei Yang > Help you, Help me _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2018-03-26 14:30 ` Baoquan He @ 2018-03-26 15:04 ` Wei Yang 0 siblings, 0 replies; 17+ messages in thread From: Wei Yang @ 2018-03-26 15:04 UTC (permalink / raw) To: Baoquan He Cc: prudo, kexec, linux-kernel, Wei Yang, takahiro.akashi, ebiederm, Andrew Morton, dyoung, vgoyal On Mon, Mar 26, 2018 at 10:30:16PM +0800, Baoquan He wrote: >Hi Wei Yang, > >On 03/25/18 at 12:13am, Wei Yang wrote: >> On Sat, Mar 24, 2018 at 09:33:30PM +0800, Baoquan He wrote: >> >> >> >> Yes. That sounds perfectly acceptable. >> >> >> >> It would be interesting to see what this approach looks like, if you >> >> have time to toss something together? >> > >> >OK, will make patches for reviewing. Thanks! >> >> Hi, Baoquan, Andrew >> >> I have come up with an implementation for top-down search the ram resources. >> Hope this would meet your need. > >Thanks for telling and your effort. Glad to know >I am not the only buyer of walk_system_ram_res_rev. I am fine with other >ways to make it, people can compare them and know which one is better. >I am working to use the list_head instead, the doubly linked list way >as Andrew suggested. Andrew and other people can help make a choice. It >won't be long. > Sure, Look forward your approach. >Thanks >Baoquan > -- Wei Yang Help you, Help me _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 2/2] kexec_file: Load kernel at top of system RAM if required 2018-03-22 3:37 [PATCH 0/2] Kexec_file: Load kernel at top of system ram Baoquan He 2018-03-22 3:37 ` [PATCH 1/2] resource: add walk_system_ram_res_rev() Baoquan He @ 2018-03-22 3:37 ` Baoquan He 2018-03-22 22:38 ` [PATCH 0/2] Kexec_file: Load kernel at top of system ram Andrew Morton 2 siblings, 0 replies; 17+ messages in thread From: Baoquan He @ 2018-03-22 3:37 UTC (permalink / raw) To: linux-kernel Cc: prudo, Baoquan He, kexec, takahiro.akashi, ebiederm, akpm, dyoung, vgoyal For kexec_file loading, if kexec_buf.top_down is 'true', the memory which is used to load kernel/initrd/purgatory is supposed to be allocated from top to down. This is also consistent with the old kexec loading interface. However, the current arch_kexec_walk_mem() doesn't do like this. It ignores checking kexec_buf.top_down, bug calls walk_system_ram_res() directly to go through all resources of System RAM, to try to find memory region which can contain the specific kexec buffer, then call locate_mem_hole_callback() to allocate memory in that found memory region from top to down. This is not right. Here add checking if kexec_buf.top_down is 'true' in arch_kexec_walk_mem(), if yes, call the newly added walk_system_ram_res_rev() to find memory region from top to down to load kernel. Signed-off-by: Baoquan He <bhe@redhat.com> --- kernel/kexec_file.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c index 57ec39995b23..76e6307f8971 100644 --- a/kernel/kexec_file.c +++ b/kernel/kexec_file.c @@ -445,6 +445,8 @@ int __weak arch_kexec_walk_mem(struct kexec_buf *kbuf, IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY, crashk_res.start, crashk_res.end, kbuf, func); + else if (kbuf->top_down) + return walk_system_ram_res_rev(0, ULONG_MAX, kbuf, func); else return walk_system_ram_res(0, ULONG_MAX, kbuf, func); } -- 2.13.6 _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 0/2] Kexec_file: Load kernel at top of system ram 2018-03-22 3:37 [PATCH 0/2] Kexec_file: Load kernel at top of system ram Baoquan He 2018-03-22 3:37 ` [PATCH 1/2] resource: add walk_system_ram_res_rev() Baoquan He 2018-03-22 3:37 ` [PATCH 2/2] kexec_file: Load kernel at top of system RAM if required Baoquan He @ 2018-03-22 22:38 ` Andrew Morton 2018-03-23 8:38 ` Baoquan He 2 siblings, 1 reply; 17+ messages in thread From: Andrew Morton @ 2018-03-22 22:38 UTC (permalink / raw) To: Baoquan He Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, dyoung, vgoyal On Thu, 22 Mar 2018 11:37:20 +0800 Baoquan He <bhe@redhat.com> wrote: > The current kexec_file ignores kexec_buf.top_down value when call > arch_kexec_walk_mem() to allocate memory for loading kernel/initrd > stuffs. This is not supposed to be what kexec_buf.top_down is used > for. OK, but why is this a problem? When fixing a bug, please fully describe the user-visible effects of that bug. That helps others understand the importance of the fix, whether it should be backported into various kernels, etc. _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/2] Kexec_file: Load kernel at top of system ram 2018-03-22 22:38 ` [PATCH 0/2] Kexec_file: Load kernel at top of system ram Andrew Morton @ 2018-03-23 8:38 ` Baoquan He 0 siblings, 0 replies; 17+ messages in thread From: Baoquan He @ 2018-03-23 8:38 UTC (permalink / raw) To: vgoyal, hpa, yinghai, Andrew Morton Cc: prudo, kexec, linux-kernel, takahiro.akashi, ebiederm, dyoung On 03/22/18 at 03:38pm, Andrew Morton wrote: > On Thu, 22 Mar 2018 11:37:20 +0800 Baoquan He <bhe@redhat.com> wrote: > > > The current kexec_file ignores kexec_buf.top_down value when call > > arch_kexec_walk_mem() to allocate memory for loading kernel/initrd > > stuffs. This is not supposed to be what kexec_buf.top_down is used > > for. > > OK, but why is this a problem? When fixing a bug, please fully > describe the user-visible effects of that bug. That helps others > understand the importance of the fix, whether it should be backported > into various kernels, etc. The problem is the current kexec file loading has different behaviour with the old kexec loading. In kexec loading, user space kexec_tools utility does most of job, it searches in /proc/iomem to try to find a memory region from top to down to load kernel. Therefore with the kexec loading, x86_64 bzImage kernel are all loaded at top of System RAM. However, the kexec file loading just searches for available memory region in iomem resource from bottom to top, then try to allocate from top to down in that region. E.g on my testing system with 2G memory as below, the kexec loading will put kernel near 0x000000013fffffff, while kexec file loading will put kernel near 0x000000003ffddfff. There's no bug reported yet, just we need consider it when take care of the kexec collaboration with other kernel components like kaslr/hotplug etc, and also the consistentency between the different kexec interface. [Mar23 15:13] Linux version 4.16.0-rc3+ (bhe@localhost.localdomain) (gcc version [ +0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.0-rc3+ root=UUID=be8f8e3a-9 [ +0.000000] x86/fpu: x87 FPU will use FXSAVE [ +0.000000] e820: BIOS-provided physical RAM map: [ +0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ +0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ +0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ +0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffddfff] usable [ +0.000000] BIOS-e820: [mem 0x000000003ffde000-0x000000003fffffff] reserved [ +0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ +0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ +0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable I searched on internet and found the original patches posted for adding bzImage 64 support into the old kexec loading, which is located in user space kexec_tools utility made by Yinghai, and Vivek and hpa reviewed patches. Still I didn't found out why kernel has to be put at top of system RAM. I guess low memory are reserved for system usage mostly, putting kexec kernel at top is safer and no need to exclude those resereved regions by system or firmware which we may not find out all of them, but not very sure about it. Hi Yinghai, Vivek, hpa, Do you know why we load kexec kernel at top of system RAM when do x86_64 bzImage loading? Thanks Baoquan _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/2] kexec_file: Load kernel at top of system RAM if required @ 2023-11-14 9:16 Baoquan He 2023-11-14 9:16 ` [PATCH 1/2] resource: add walk_system_ram_res_rev() Baoquan He 0 siblings, 1 reply; 17+ messages in thread From: Baoquan He @ 2023-11-14 9:16 UTC (permalink / raw) To: linux-kernel Cc: kexec, x86, linux-parisc, linuxppc-dev, linux-riscv, linux-s390, akpm, ebiederm, takahiro.akashi, Baoquan He Justification: ============== Kexec_load interface has been doing top down searching and loading kernel/initrd/purgtory etc to prepare for kexec reboot. In that way, the benefits are that it avoids to consume and fragment limited low memory which satisfy DMA buffer allocation and big chunk of continuous memory during system init; and avoids to stir with BIOS/FW reserved or occupied areas, or corner case handling/work around/quirk occupied areas when doing system init. By the way, the top-down searching and loading of kexec-ed kernel is done in user space utility code. For kexec_file loading, even if kexec_buf.top_down is 'true', it's simply ignored. It calls walk_system_ram_res() directly to go through all resources of System RAM bottom up, to find an available memory region, then call locate_mem_hole_callback() to allocate memory in that found memory region from top to down. This is not expected and inconsistent with kexec_load. Implementation =============== In patch 1, introduce a new function walk_system_ram_res_rev() which is a variant of walk_system_ram_res(), it walks through a list of all the resources of System RAM in reversed order, i.e., from higher to lower. In patch 2, check if kexec_buf.top_down is 'true' in kexec_walk_resources(), if yes, call walk_system_ram_res_rev() to find memory region of system RAM from top to down to load kernel/initrd etc. Background information: ======================= And I ever tried this in the past in a different way, please see below link. In the post, I tried to adjust struct sibling linking code, replace the the singly linked list with list_head so that walk_system_ram_res_rev() can be implemented in a much easier way. Finally I failed. https://lore.kernel.org/all/20180718024944.577-4-bhe@redhat.com/ This time, I picked up the patch from AKASHI Takahiro's old post and made some change to take as the current patch 1: https://lists.infradead.org/pipermail/linux-arm-kernel/2017-September/531456.html Testing: ======== Only tried on x86_64 Baoquan He (2): resource: add walk_system_ram_res_rev() kexec_file: Load kernel at top of system RAM if required include/linux/ioport.h | 3 +++ kernel/kexec_file.c | 2 ++ kernel/resource.c | 61 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 66 insertions(+) -- 2.41.0 _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 1/2] resource: add walk_system_ram_res_rev() 2023-11-14 9:16 [PATCH 0/2] kexec_file: Load kernel at top of system RAM if required Baoquan He @ 2023-11-14 9:16 ` Baoquan He 2023-11-14 23:17 ` Andrew Morton 0 siblings, 1 reply; 17+ messages in thread From: Baoquan He @ 2023-11-14 9:16 UTC (permalink / raw) To: linux-kernel Cc: kexec, x86, linux-parisc, linuxppc-dev, linux-riscv, linux-s390, akpm, ebiederm, takahiro.akashi, Baoquan He This function, being a variant of walk_system_ram_res() introduced in commit 8c86e70acead ("resource: provide new functions to walk through resources"), walks through a list of all the resources of System RAM in reversed order, i.e., from higher to lower. It will be used in kexec_file code to load kernel, initrd etc when preparing kexec reboot. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Baoquan He <bhe@redhat.com> --- include/linux/ioport.h | 3 +++ kernel/resource.c | 61 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+) diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 14f5cfabbbc8..db7fe25f3370 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -331,6 +331,9 @@ extern int walk_system_ram_res(u64 start, u64 end, void *arg, int (*func)(struct resource *, void *)); extern int +walk_system_ram_res_rev(u64 start, u64 end, void *arg, + int (*func)(struct resource *, void *)); +extern int walk_iomem_res_desc(unsigned long desc, unsigned long flags, u64 start, u64 end, void *arg, int (*func)(struct resource *, void *)); diff --git a/kernel/resource.c b/kernel/resource.c index 866ef3663a0b..12bce44a2c08 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -27,6 +27,8 @@ #include <linux/mount.h> #include <linux/resource_ext.h> #include <uapi/linux/magic.h> +#include <linux/string.h> +#include <linux/vmalloc.h> #include <asm/io.h> @@ -429,6 +431,65 @@ int walk_system_ram_res(u64 start, u64 end, void *arg, func); } +/* + * This function, being a variant of walk_system_ram_res(), calls the @func + * callback against all memory ranges of type System RAM which are marked as + * IORESOURCE_SYSTEM_RAM and IORESOUCE_BUSY in reversed order, i.e., from + * higher to lower. + */ +int walk_system_ram_res_rev(u64 start, u64 end, void *arg, + int (*func)(struct resource *, void *)) +{ + struct resource res, *rams; + int rams_size = 16, i; + unsigned long flags; + int ret = -1; + + /* create a list */ + rams = kvcalloc(rams_size, sizeof(struct resource), GFP_KERNEL); + if (!rams) + return ret; + + flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; + i = 0; + while ((start < end) && + (!find_next_iomem_res(start, end, flags, IORES_DESC_NONE, &res))) { + if (i >= rams_size) { + /* re-alloc */ + struct resource *rams_new; + int rams_new_size; + + rams_new_size = rams_size + 16; + rams_new = kvcalloc(rams_new_size, sizeof(struct resource), + GFP_KERNEL); + if (!rams_new) + goto out; + + memcpy(rams_new, rams, + sizeof(struct resource) * rams_size); + kvfree(rams); + rams = rams_new; + rams_size = rams_new_size; + } + + rams[i].start = res.start; + rams[i++].end = res.end; + + start = res.end + 1; + } + + /* go reverse */ + for (i--; i >= 0; i--) { + ret = (*func)(&rams[i], arg); + if (ret) + break; + } + +out: + kvfree(rams); + return ret; +} + /* * This function calls the @func callback against all memory ranges, which * are ranges marked as IORESOURCE_MEM and IORESOUCE_BUSY. -- 2.41.0 _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2023-11-14 9:16 ` [PATCH 1/2] resource: add walk_system_ram_res_rev() Baoquan He @ 2023-11-14 23:17 ` Andrew Morton 2023-11-15 0:40 ` Baoquan He 0 siblings, 1 reply; 17+ messages in thread From: Andrew Morton @ 2023-11-14 23:17 UTC (permalink / raw) To: Baoquan He Cc: linux-kernel, kexec, x86, linux-parisc, linuxppc-dev, linux-riscv, linux-s390, ebiederm, takahiro.akashi On Tue, 14 Nov 2023 17:16:57 +0800 Baoquan He <bhe@redhat.com> wrote: > This function, being a variant of walk_system_ram_res() introduced in > commit 8c86e70acead ("resource: provide new functions to walk through > resources"), walks through a list of all the resources of System RAM > in reversed order, i.e., from higher to lower. > > It will be used in kexec_file code to load kernel, initrd etc when > preparing kexec reboot. > > ... > > +/* > + * This function, being a variant of walk_system_ram_res(), calls the @func > + * callback against all memory ranges of type System RAM which are marked as > + * IORESOURCE_SYSTEM_RAM and IORESOUCE_BUSY in reversed order, i.e., from > + * higher to lower. > + */ > +int walk_system_ram_res_rev(u64 start, u64 end, void *arg, > + int (*func)(struct resource *, void *)) > +{ > + struct resource res, *rams; > + int rams_size = 16, i; > + unsigned long flags; > + int ret = -1; > + > + /* create a list */ > + rams = kvcalloc(rams_size, sizeof(struct resource), GFP_KERNEL); > + if (!rams) > + return ret; > + > + flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; > + i = 0; > + while ((start < end) && > + (!find_next_iomem_res(start, end, flags, IORES_DESC_NONE, &res))) { > + if (i >= rams_size) { > + /* re-alloc */ > + struct resource *rams_new; > + int rams_new_size; > + > + rams_new_size = rams_size + 16; > + rams_new = kvcalloc(rams_new_size, sizeof(struct resource), > + GFP_KERNEL); kvrealloc()? > + if (!rams_new) > + goto out; > + > + memcpy(rams_new, rams, > + sizeof(struct resource) * rams_size); > + kvfree(rams); > + rams = rams_new; > + rams_size = rams_new_size; > + } > + > + rams[i].start = res.start; > + rams[i++].end = res.end; > + > + start = res.end + 1; > + } > + > + /* go reverse */ > + for (i--; i >= 0; i--) { > + ret = (*func)(&rams[i], arg); > + if (ret) > + break; > + } > + > +out: > + kvfree(rams); > + return ret; > +} > + > /* > * This function calls the @func callback against all memory ranges, which > * are ranges marked as IORESOURCE_MEM and IORESOUCE_BUSY. > -- > 2.41.0 _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] resource: add walk_system_ram_res_rev() 2023-11-14 23:17 ` Andrew Morton @ 2023-11-15 0:40 ` Baoquan He 0 siblings, 0 replies; 17+ messages in thread From: Baoquan He @ 2023-11-15 0:40 UTC (permalink / raw) To: Andrew Morton Cc: linux-kernel, kexec, x86, linux-parisc, linuxppc-dev, linux-riscv, linux-s390, ebiederm, takahiro.akashi On 11/14/23 at 03:17pm, Andrew Morton wrote: > On Tue, 14 Nov 2023 17:16:57 +0800 Baoquan He <bhe@redhat.com> wrote: > > > This function, being a variant of walk_system_ram_res() introduced in > > commit 8c86e70acead ("resource: provide new functions to walk through > > resources"), walks through a list of all the resources of System RAM > > in reversed order, i.e., from higher to lower. > > > > It will be used in kexec_file code to load kernel, initrd etc when > > preparing kexec reboot. > > > > ... > > > > +/* > > + * This function, being a variant of walk_system_ram_res(), calls the @func > > + * callback against all memory ranges of type System RAM which are marked as > > + * IORESOURCE_SYSTEM_RAM and IORESOUCE_BUSY in reversed order, i.e., from > > + * higher to lower. > > + */ > > +int walk_system_ram_res_rev(u64 start, u64 end, void *arg, > > + int (*func)(struct resource *, void *)) > > +{ > > + struct resource res, *rams; > > + int rams_size = 16, i; > > + unsigned long flags; > > + int ret = -1; > > + > > + /* create a list */ > > + rams = kvcalloc(rams_size, sizeof(struct resource), GFP_KERNEL); > > + if (!rams) > > + return ret; > > + > > + flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; > > + i = 0; > > + while ((start < end) && > > + (!find_next_iomem_res(start, end, flags, IORES_DESC_NONE, &res))) { > > + if (i >= rams_size) { > > + /* re-alloc */ > > + struct resource *rams_new; > > + int rams_new_size; > > + > > + rams_new_size = rams_size + 16; > > + rams_new = kvcalloc(rams_new_size, sizeof(struct resource), > > + GFP_KERNEL); > > kvrealloc()? Exactly. Will udpate. Thanks for the great suggestion. > > > + if (!rams_new) > > + goto out; > > + > > + memcpy(rams_new, rams, > > + sizeof(struct resource) * rams_size); > > + kvfree(rams); > > + rams = rams_new; > > + rams_size = rams_new_size; > > + } > > + > > + rams[i].start = res.start; > > + rams[i++].end = res.end; > > + > > + start = res.end + 1; > > + } > > + > > + /* go reverse */ > > + for (i--; i >= 0; i--) { > > + ret = (*func)(&rams[i], arg); > > + if (ret) > > + break; > > + } > > + > > +out: > > + kvfree(rams); > > + return ret; > > +} > > + > > /* > > * This function calls the @func callback against all memory ranges, which > > * are ranges marked as IORESOURCE_MEM and IORESOUCE_BUSY. > > -- > > 2.41.0 > _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2023-11-15 0:41 UTC | newest] Thread overview: 17+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-03-22 3:37 [PATCH 0/2] Kexec_file: Load kernel at top of system ram Baoquan He 2018-03-22 3:37 ` [PATCH 1/2] resource: add walk_system_ram_res_rev() Baoquan He 2018-03-22 22:29 ` Andrew Morton 2018-03-23 0:58 ` Baoquan He 2018-03-23 2:06 ` Andrew Morton 2018-03-23 3:10 ` Baoquan He 2018-03-23 20:06 ` Andrew Morton 2018-03-24 13:33 ` Baoquan He 2018-03-24 16:13 ` Wei Yang 2018-03-26 14:30 ` Baoquan He 2018-03-26 15:04 ` Wei Yang 2018-03-22 3:37 ` [PATCH 2/2] kexec_file: Load kernel at top of system RAM if required Baoquan He 2018-03-22 22:38 ` [PATCH 0/2] Kexec_file: Load kernel at top of system ram Andrew Morton 2018-03-23 8:38 ` Baoquan He -- strict thread matches above, loose matches on Subject: below -- 2023-11-14 9:16 [PATCH 0/2] kexec_file: Load kernel at top of system RAM if required Baoquan He 2023-11-14 9:16 ` [PATCH 1/2] resource: add walk_system_ram_res_rev() Baoquan He 2023-11-14 23:17 ` Andrew Morton 2023-11-15 0:40 ` Baoquan He
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).