kexec.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Baoquan He <bhe@redhat.com>
To: kexec@lists.infradead.org
Subject: [PATCH v5 4/8] crash: generic crash hotplug support infrastructure
Date: Thu, 24 Mar 2022 21:38:56 +0800	[thread overview]
Message-ID: <20220324133856.GC354864@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20220303162725.49640-5-eric.devolder@oracle.com>

On 03/03/22 at 11:27am, Eric DeVolder wrote:
> This patch introduces a generic crash hot plug/unplug infrastructure
> for CPU and memory changes. Upon CPU and memory changes, a generic
> crash_hotplug_handler() obtains the appropriate lock, does some
> important house keeping and then dispatches the hot plug/unplug event
> to the architecture specific arch_crash_hotplug_handler(), and when
> that handler returns, the lock is released.
> 
> This patch modifies crash_core.c to implement a subsys_initcall()
> function that installs handlers for hot plug/unplug events. If CPU
> hotplug is enabled, then cpuhp_setup_state() is invoked to register a
> handler for CPU changes. Similarly, if memory hotplug is enabled, then
> register_memory_notifier() is invoked to install a handler for memory
> changes. These handlers in turn invoke the common generic handler
> crash_hotplug_handler().
> 
> On the CPU side, cpuhp_setup_state_nocalls() is invoked with parameter
> CPUHP_AP_ONLINE_DYN. While this works, when a CPU is being unplugged,
> the CPU still shows up in foreach_present_cpu() during the regeneration
> of the new CPU list, thus the need to explicitly check and exclude the
> soon-to-be offlined CPU in crash_prepare_elf64_headers().
> 
> On the memory side, each un/plugged memory block passes through the
> handler. For example, if a 1GiB DIMM is hotplugged, that generate 8
> memory events, one for each 128MiB memblock.

I rewrite the log as below with my understanding. Hope it's simpler to
help people get what's going on here. Please consider to take if it's
OK to you or adjust based on this. The code looks good to me.

crash: add generic infrastructure for crash hotplug support 

Upon CPU and memory changes, a generic crash_hotplug_handler() will
dispatch the hot plug/unplug event to the architecture specific
arch_crash_hotplug_handler(). During the process, kexec_mutex need be
held.

To support cpu hotplug, one callback pair are registered to capture
KEXEC_CRASH_HP_ADD_CPU and KEXEC_CRASH_HP_REMOVE_CPU events via
cpuhp_setup_state_nocalls(). The callbacks then call
crash_hotplug_handler() to handle.

To support memory hotplug, a notifier crash_memhp_nb is registered to 
memory_chain to watch MEM_ONLINE and MEM_OFFLINE events.

> 
> Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
> ---
>  include/linux/kexec.h |  16 +++++++
>  kernel/crash_core.c   | 108 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 124 insertions(+)
> 
> diff --git a/include/linux/kexec.h b/include/linux/kexec.h
> index d7b59248441b..b11d75a6b2bc 100644
> --- a/include/linux/kexec.h
> +++ b/include/linux/kexec.h
> @@ -300,6 +300,13 @@ struct kimage {
>  
>  	/* Information for loading purgatory */
>  	struct purgatory_info purgatory_info;
> +
> +#ifdef CONFIG_CRASH_HOTPLUG
> +	bool hotplug_event;
> +	int offlinecpu;
> +	bool elf_index_valid;
> +	int elf_index;
> +#endif
>  #endif
>  
>  #ifdef CONFIG_IMA_KEXEC
> @@ -316,6 +323,15 @@ struct kimage {
>  	unsigned long elf_load_addr;
>  };
>  
> +#ifdef CONFIG_CRASH_HOTPLUG
> +void arch_crash_hotplug_handler(struct kimage *image,
> +	unsigned int hp_action, unsigned long a, unsigned long b);
> +#define KEXEC_CRASH_HP_REMOVE_CPU   0
> +#define KEXEC_CRASH_HP_ADD_CPU      1
> +#define KEXEC_CRASH_HP_REMOVE_MEMORY 2
> +#define KEXEC_CRASH_HP_ADD_MEMORY   3
> +#endif /* CONFIG_CRASH_HOTPLUG */
> +
>  /* kexec interface functions */
>  extern void machine_kexec(struct kimage *image);
>  extern int machine_kexec_prepare(struct kimage *image);
> diff --git a/kernel/crash_core.c b/kernel/crash_core.c
> index 256cf6db573c..76959d440f71 100644
> --- a/kernel/crash_core.c
> +++ b/kernel/crash_core.c
> @@ -9,12 +9,17 @@
>  #include <linux/init.h>
>  #include <linux/utsname.h>
>  #include <linux/vmalloc.h>
> +#include <linux/highmem.h>
> +#include <linux/memory.h>
> +#include <linux/cpuhotplug.h>
>  
>  #include <asm/page.h>
>  #include <asm/sections.h>
>  
>  #include <crypto/sha1.h>
>  
> +#include "kexec_internal.h"
> +
>  /* vmcoreinfo stuff */
>  unsigned char *vmcoreinfo_data;
>  size_t vmcoreinfo_size;
> @@ -491,3 +496,106 @@ static int __init crash_save_vmcoreinfo_init(void)
>  }
>  
>  subsys_initcall(crash_save_vmcoreinfo_init);
> +
> +#ifdef CONFIG_CRASH_HOTPLUG
> +void __weak arch_crash_hotplug_handler(struct kimage *image,
> +	unsigned int hp_action, unsigned long a, unsigned long b)
> +{
> +	pr_warn("crash hp: %s not implemented", __func__);
> +}
> +
> +static void crash_hotplug_handler(unsigned int hp_action,
> +	unsigned long a, unsigned long b)
> +{
> +	/* Obtain lock while changing crash information */
> +	if (!mutex_trylock(&kexec_mutex))
> +		return;
> +
> +	/* Check kdump is loaded */
> +	if (kexec_crash_image) {
> +		pr_debug("crash hp: hp_action %u, a %lu, b %lu", hp_action,
> +			a, b);
> +
> +		/* Needed in order for the segments to be updated */
> +		arch_kexec_unprotect_crashkres();
> +
> +		/* Flag to differentiate between normal load and hotplug */
> +		kexec_crash_image->hotplug_event = true;
> +
> +		/* Now invoke arch-specific update handler */
> +		arch_crash_hotplug_handler(kexec_crash_image, hp_action, a, b);
> +
> +		/* No longer handling a hotplug event */
> +		kexec_crash_image->hotplug_event = false;
> +
> +		/* Change back to read-only */
> +		arch_kexec_protect_crashkres();
> +	}
> +
> +	/* Release lock now that update complete */
> +	mutex_unlock(&kexec_mutex);
> +}
> +
> +#if defined(CONFIG_MEMORY_HOTPLUG)
> +static int crash_memhp_notifier(struct notifier_block *nb,
> +	unsigned long val, void *v)
> +{
> +	struct memory_notify *mhp = v;
> +	unsigned long start, end;
> +
> +	start = mhp->start_pfn << PAGE_SHIFT;
> +	end = ((mhp->start_pfn + mhp->nr_pages) << PAGE_SHIFT) - 1;
> +
> +	switch (val) {
> +	case MEM_ONLINE:
> +		crash_hotplug_handler(KEXEC_CRASH_HP_ADD_MEMORY,
> +			start, end-start);
> +		break;
> +
> +	case MEM_OFFLINE:
> +		crash_hotplug_handler(KEXEC_CRASH_HP_REMOVE_MEMORY,
> +			start, end-start);
> +		break;
> +	}
> +	return NOTIFY_OK;
> +}
> +
> +static struct notifier_block crash_memhp_nb = {
> +	.notifier_call = crash_memhp_notifier,
> +	.priority = 0
> +};
> +#endif
> +
> +#if defined(CONFIG_HOTPLUG_CPU)
> +static int crash_cpuhp_online(unsigned int cpu)
> +{
> +	crash_hotplug_handler(KEXEC_CRASH_HP_ADD_CPU, cpu, 0);
> +	return 0;
> +}
> +
> +static int crash_cpuhp_offline(unsigned int cpu)
> +{
> +	crash_hotplug_handler(KEXEC_CRASH_HP_REMOVE_CPU, cpu, 0);
> +	return 0;
> +}
> +#endif
> +
> +static int __init crash_hotplug_init(void)
> +{
> +	int result = 0;
> +
> +#if defined(CONFIG_MEMORY_HOTPLUG)
> +	register_memory_notifier(&crash_memhp_nb);
> +#endif
> +
> +#if defined(CONFIG_HOTPLUG_CPU)
> +	result = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
> +				"crash/cpuhp",
> +				crash_cpuhp_online, crash_cpuhp_offline);
> +#endif
> +
> +	return result;
> +}
> +
> +subsys_initcall(crash_hotplug_init);
> +#endif /* CONFIG_CRASH_HOTPLUG */
> -- 
> 2.27.0
> 



  parent reply	other threads:[~2022-03-24 13:38 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-03 16:27 [PATCH v5 0/8] crash: Kernel handling of CPU and memory hot un/plug Eric DeVolder
2022-03-03 16:27 ` [PATCH v5 1/8] x86/crash: fix minor typo/bug in debug message Eric DeVolder
2022-03-03 16:27 ` [PATCH v5 2/8] x86/crash hp: Introduce CRASH_HOTPLUG configuration options Eric DeVolder
2022-03-21 11:59   ` Baoquan He
2022-04-01 18:31     ` Eric DeVolder
2022-03-03 16:27 ` [PATCH v5 3/8] crash: prototype change for crash_prepare_elf64_headers Eric DeVolder
2022-03-03 16:27 ` [PATCH v5 4/8] crash: generic crash hotplug support infrastructure Eric DeVolder
2022-03-15 12:08   ` Sourabh Jain
2022-03-15 14:12     ` Eric DeVolder
2022-03-17 10:46       ` Sourabh Jain
2022-03-24 13:38   ` Baoquan He [this message]
2022-03-24 13:49     ` Baoquan He
2022-03-24 13:53       ` Eric DeVolder
2022-03-24 14:33         ` Baoquan He
2022-03-24 14:37           ` Eric DeVolder
2022-03-28 16:08             ` Eric DeVolder
2022-03-29  1:10               ` Baoquan He
2022-04-01 18:33                 ` Eric DeVolder
2022-03-03 16:27 ` [PATCH v5 5/8] kexec: exclude elfcorehdr from the segment digest Eric DeVolder
2022-03-03 16:27 ` [PATCH v5 6/8] kexec: exclude hot remove cpu from elfcorehdr notes Eric DeVolder
2022-03-03 16:27 ` [PATCH v5 7/8] x86/crash: Add x86 crash hotplug support for kexec_file_load Eric DeVolder
2022-03-31 10:34   ` Baoquan He
2022-04-01 18:34     ` Eric DeVolder
2022-03-03 16:27 ` [PATCH v5 8/8] x86/crash: Add x86 crash hotplug support for kexec_load Eric DeVolder
2022-03-31 11:10   ` Baoquan He
2022-04-01 18:35     ` Eric DeVolder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220324133856.GC354864@MiWiFi-R3L-srv \
    --to=bhe@redhat.com \
    --cc=kexec@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).