Kexec Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
To: Catalin Marinas <catalin.marinas@arm.com>, Baoquan He <bhe@redhat.com>
Cc: <linux-kernel@vger.kernel.org>, <horms@kernel.org>,
	<John.p.donnelly@oracle.com>, <will@kernel.org>,
	<kexec@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4] arm64: kdump: simplify the reservation behaviour of crashkernel=,high
Date: Fri, 24 Mar 2023 10:47:03 +0800	[thread overview]
Message-ID: <4d4ecdd6-9716-570d-5595-e47bfbb58cdf@huawei.com> (raw)
In-Reply-To: <ZByLga6FS5o8Syug@arm.com>



On 2023/3/24 1:25, Catalin Marinas wrote:
> On Mon, Mar 20, 2023 at 09:12:08PM +0800, Baoquan He wrote:
>> On 03/17/23 at 06:05pm, Catalin Marinas wrote:
>>> On Fri, Mar 17, 2023 at 11:09:13PM +0800, Baoquan He wrote:
>>>> In fact, what I want to achieve is we set CRASH_ADDR_LOW_MAX to 4G
>>>> fixedly on arm64, just like what we do on x86_64. As for RPi4 platform,
>>>> we leave it to crashkernel=size@offset syntax. Two reasons for this:
>>>> 1) crashkernel is needed on enterprise platform, such as workstation or
>>>> server. While RPi4 is obviously not the target. I contacted several RPi4
>>>> players in Redhat and my friends, none of them ever played kdump
>>>> testing. If they really have to, crashkernel=size@offset is enough for
>>>> them to set.
>>>
>>> I'd like crashkernel=size (without @offset) on RPi4 to still do the
>>> right thing: a low allocation at least as we had until recently (or
>>> high+low where high here is maybe above 1GB). IOW, no regression for
>>> this crashkernel=size case. We can then change the explicit
>>> crashkernel=x,high to mean only above 4GB irrespective of the platform
>>> and crashkernel=x,low to be below arm64_dma_phys_limit.
>>
>> Since crashkernel=,high and crashkernel=size fallback was added in arm64
>> recently, with my understanding, you are suggesting:
>>
>> on arm64:
>> RPi4:
>> crashkernel=size
>> 0~1G: low memory (no regression introduced)
> 
> And, if not enough low memory, fall back to memory above 1GB (for RPi4;
> it would be above 4GB for any other system).
> 
>> crashkernel=size,high
>> 0~1G: low memory | 4G~top: high memory
> 
> Yes.
> 
>> Other normal system:
>> crashkernel=size|crashkernel=size,high
>> 0~4G: low memory | 4G~top: high memory
> 
> Yes.
> 
> IOW, specifying 'high' only forces the high allocation above 4GB instead
> of arm64_dma_phys_limit, irrespective of the platform. If no 'high'
> specified search_base remains CRASH_ADDR_LOW_MAX (1GB on RPi4, 4GB for
> the rest).
> 
>>>> 2) with the fixed CRASH_ADDR_LOW_MAX as 4G, we can easily fix the
>>>> problem of base page mapping for the whole linear mapping if crsahkernel=
>>>> is set in kernel parameter shown in [1] at bottom. 
>>>
>>> That's a different problem ;). I should re-read that thread, forgot most
>>> of the details but I recall one of the counter arguments was that there
>>> isn't a strong case to unmap the crashkernel reservation. Now, if we
>>> place crashdump kernel image goes in the 'high' reservation, can we not
>>> leave the 'low' reservation mapped? We don't really care about it as it
>>> wouldn't have any meaningful code/data to be preserved. If the 'high'
>>> one goes above 4G always, we don't depend on the arm64_dma_phys_limit.
>>
>> Yes, this looks ideal. While it only works when crashkernel=,high case and
>> it succeeds to reserve a memory region for the specified size of crashkernel
>> high memory. At below, we have 4 cases of crashkernel= syntax:
>>
>> crashkernel=size
>> 1)first attempt:  low memory under arm64_dma_phys_limit
>> 2)fallback:       finding memory above 4G
> 
> (2) should be 'finding memory above arm64_dma_phys_limit' to keep the
> current behaviour for RPi4.
> 
>> crashkernel=size,high
>> 3)first attempt:  finding memory above 4G
>> 4)fallback:       low memory under arm64_dma_phys_limit
> 
> Yes.
> 
>> case 3) works with your suggestion. However, 1), 2), 4) all need to
>> defer to bootmem_init(). With these cases and different handling,
>> reserve_crashkernel() could be too complicated.
> 
> Ah, because of the fallback below arm64_dma_phys_limit as in (4), we
> still can't move the full crashkernel reservation early. Well, we could
> do it in two steps: (a) early attempt at crashkernel reservation above
> 4G if 'high' was specified and we avoid mapping it if successful and (b)
> do the late crashkernel reservation below arm64_dma_phys_limit and skip
> unmapping as being too late. This way most server-like platforms would
> get a reservation above 4G, unmapped.
> 
>> I am wondering if we can cancel the protection of crashkernel memory
>> region on arm64 for now. In earlier discussion, people questioned if the
>> protection is necessary on arm64. After comparison, I would rather take
>> away the protection method of crashkernel region since they try to
>> protect in a chance in one million , while the base page mapping for the
>> whole linear mapping is mitigating arm64 high end server always.
> 
> This works for me. We can add the protection later for addresses above
> 4GB only as mentioned above.

Recently, I've also been rethinking the performance issues when kdump is
enabled. I have a new idea. For crashkernel=X, we can temporarily search
for free memory from the low address to the high address. As below:

save_bottom_up = memblock_bottom_up();
if (!high)
	memblock_set_bottom_up(true);
crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, crash_base, crash_max);
memblock_set_bottom_up(save_bottom_up);

The final code change should be small, and I'll try it today.

> 

-- 
Regards,
  Zhen Lei

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

  reply	other threads:[~2023-03-24  2:47 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-06  8:41 [PATCH v4] arm64: kdump: simplify the reservation behaviour of crashkernel=,high Baoquan He
2023-03-06 12:55 ` Leizhen (ThunderTown)
2023-03-08 11:02 ` Simon Horman
2023-03-15 14:52 ` Catalin Marinas
2023-03-16  9:47   ` Baoquan He
2023-03-16 17:35     ` Catalin Marinas
2023-03-17 15:09       ` Baoquan He
2023-03-17 18:05         ` Catalin Marinas
2023-03-20 13:12           ` Baoquan He
2023-03-23 17:25             ` Catalin Marinas
2023-03-24  2:47               ` Leizhen (ThunderTown) [this message]
2023-03-24 14:53                 ` Baoquan He
2023-03-25  1:53                   ` Leizhen (ThunderTown)
2023-03-24 14:08               ` Baoquan He
2023-03-24 17:08                 ` Catalin Marinas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4d4ecdd6-9716-570d-5595-e47bfbb58cdf@huawei.com \
    --to=thunder.leizhen@huawei.com \
    --cc=John.p.donnelly@oracle.com \
    --cc=bhe@redhat.com \
    --cc=catalin.marinas@arm.com \
    --cc=horms@kernel.org \
    --cc=kexec@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox