From: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
To: "x86@kernel.org" <x86@kernel.org>,
"kexec@lists.infradead.org" <kexec@lists.infradead.org>,
Marcelo Tosatti <mtosatti@redhat.com>,
Gleb Natapov <gleb@redhat.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>
Subject: [PATCH v8 2/2] KVM-INTEL: add a notifier and a bitmap to support VMCLEAR in kdump
Date: Thu, 22 Nov 2012 16:25:05 +0800 [thread overview]
Message-ID: <50ADE161.8090209@cn.fujitsu.com> (raw)
In-Reply-To: <50ADE0C2.1000106@cn.fujitsu.com>
The notifier will be registered in crash_notifier_list when loading
kvm-intel module. And the bitmap indicates whether we should do
VMCLEAR operation in kdump. The bits in the bitmap are set/unset
according to different conditions.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
---
arch/x86/kvm/vmx.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 70 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 4ff0ab9..d890372 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -41,6 +41,7 @@
#include <asm/i387.h>
#include <asm/xcr.h>
#include <asm/perf_event.h>
+#include <asm/kexec.h>
#include "trace.h"
@@ -963,6 +964,49 @@ static void vmcs_load(struct vmcs *vmcs)
vmcs, phys_addr);
}
+#ifdef CONFIG_KEXEC
+/*
+ * This bitmap is used to indicate whether the vmclear
+ * operation is enabled on all cpus. All disabled by
+ * default.
+ */
+static cpumask_t crash_vmclear_enabled_bitmap = CPU_MASK_NONE;
+
+static inline void crash_enable_local_vmclear(int cpu)
+{
+ cpumask_set_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static inline void crash_disable_local_vmclear(int cpu)
+{
+ cpumask_clear_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static inline int crash_local_vmclear_enabled(int cpu)
+{
+ return cpumask_test_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static void vmclear_local_loaded_vmcss(void);
+static int crash_vmclear_local_loaded_vmcss(struct notifier_block *this,
+ unsigned long val, void *ptr)
+{
+ int cpu = raw_smp_processor_id();
+
+ if (crash_local_vmclear_enabled(cpu))
+ vmclear_local_loaded_vmcss();
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block crash_vmclear_notifier = {
+ .notifier_call = crash_vmclear_local_loaded_vmcss,
+};
+#else
+static inline void crash_enable_local_vmclear(int cpu) { }
+static inline void crash_disable_local_vmclear(int cpu) { }
+#endif /* CONFIG_KEXEC */
+
static void __loaded_vmcs_clear(void *arg)
{
struct loaded_vmcs *loaded_vmcs = arg;
@@ -972,8 +1016,10 @@ static void __loaded_vmcs_clear(void *arg)
return; /* vcpu migration can race with cpu offline */
if (per_cpu(current_vmcs, cpu) == loaded_vmcs->vmcs)
per_cpu(current_vmcs, cpu) = NULL;
+ crash_disable_local_vmclear(cpu);
list_del(&loaded_vmcs->loaded_vmcss_on_cpu_link);
loaded_vmcs_init(loaded_vmcs);
+ crash_enable_local_vmclear(cpu);
}
static void loaded_vmcs_clear(struct loaded_vmcs *loaded_vmcs)
@@ -1491,8 +1537,10 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
local_irq_disable();
+ crash_disable_local_vmclear(cpu);
list_add(&vmx->loaded_vmcs->loaded_vmcss_on_cpu_link,
&per_cpu(loaded_vmcss_on_cpu, cpu));
+ crash_enable_local_vmclear(cpu);
local_irq_enable();
/*
@@ -2302,6 +2350,18 @@ static int hardware_enable(void *garbage)
return -EBUSY;
INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
+
+ /*
+ * Now we can enable the vmclear operation in kdump
+ * since the loaded_vmcss_on_cpu list on this cpu
+ * has been initialized.
+ *
+ * Though the cpu is not in VMX operation now, there
+ * is no problem to enable the vmclear operation
+ * for the loaded_vmcss_on_cpu list is empty!
+ */
+ crash_enable_local_vmclear(cpu);
+
rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
test_bits = FEATURE_CONTROL_LOCKED;
@@ -7230,6 +7290,11 @@ static int __init vmx_init(void)
if (r)
goto out3;
+#ifdef CONFIG_KEXEC
+ atomic_notifier_chain_register(&crash_notifier_list,
+ &crash_vmclear_notifier);
+#endif
+
vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
vmx_disable_intercept_for_msr(MSR_GS_BASE, false);
vmx_disable_intercept_for_msr(MSR_KERNEL_GS_BASE, true);
@@ -7265,6 +7330,11 @@ static void __exit vmx_exit(void)
free_page((unsigned long)vmx_io_bitmap_b);
free_page((unsigned long)vmx_io_bitmap_a);
+#ifdef CONFIG_KEXEC
+ atomic_notifier_chain_unregister(&crash_notifier_list,
+ &crash_vmclear_notifier);
+#endif
+
kvm_exit();
}
--
1.7.1
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
next prev parent reply other threads:[~2012-11-22 8:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 8:22 [PATCH v8 0/2] x86: vmclear vmcss on all cpus when doing kdump if necessary Zhang Yanfei
2012-11-22 8:23 ` [PATCH v8 1/2] x86/kexec: add a new atomic notifier list for kdump Zhang Yanfei
2012-11-26 15:08 ` Eric W. Biederman
2012-11-26 17:20 ` Gleb Natapov
2012-11-26 17:43 ` Eric W. Biederman
2012-11-26 17:53 ` Gleb Natapov
2012-11-26 18:18 ` Eric W. Biederman
2012-11-27 1:32 ` Zhang Yanfei
2012-11-27 1:49 ` Eric W. Biederman
2012-11-27 1:53 ` Zhang Yanfei
2012-11-22 8:25 ` Zhang Yanfei [this message]
2012-11-25 14:26 ` [PATCH v8 0/2] x86: vmclear vmcss on all cpus when doing kdump if necessary Gleb Natapov
2012-11-26 1:50 ` Zhang Yanfei
2012-11-26 1:55 ` Zhang Yanfei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50ADE161.8090209@cn.fujitsu.com \
--to=zhangyanfei@cn.fujitsu.com \
--cc=gleb@redhat.com \
--cc=kexec@lists.infradead.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox