Kexec Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Baoquan He <bhe@redhat.com>
To: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: kexec@lists.infradead.org, Aditya Gupta <adityag@linux.ibm.com>,
	Coiby Xu <coxu@redhat.com>, Hari Bathini <hbathini@linux.ibm.com>,
	Mahesh Salgaonkar <mahesh@linux.ibm.com>,
	Simon Horman <horms@kernel.org>
Subject: Re: [PATCH v3 1/3] kexec_load: Use new kexec flag for hotplug support
Date: Mon, 8 Jul 2024 18:30:12 +0800	[thread overview]
Message-ID: <Zou/tF+wmuEKVT7c@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20240707152456.87899-2-sourabhjain@linux.ibm.com>

On 07/07/24 at 08:54pm, Sourabh Jain wrote:
> Kernel commit 79365026f869 (crash: add a new kexec flag for hotplug
> support) has introduced a new kexec flag to generalize hotplug support.
> The newly introduced kexec flags for hotplug allow architectures to
> exclude all the required kexec segments from SHA calculation so that
> the kernel can update them on hotplug events. This was not possible
> earlier with the KEXEC_UPDATE_ELFCOREHDR kexec flags since it was added
> only for the elfcorehdr segment.
> 
> To enable architectures to control the list of kexec segments to exclude
> when hotplug support is enabled, add a new architecture-specific
> function named arch_do_exclude_segment. During the SHA calculation, this
> function gets called to let the architecture decide whether a specific
> kexec segment should be considered for SHA calculation or not.
> 
> Note: To avoid breaking backward compatibility, the new kexec flag
> KEXEC_CRASH_HOTPLUG_SUPPORT is not used for x86 for now.
> 
> Cc: Aditya Gupta <adityag@linux.ibm.com>
> Cc: Baoquan He <bhe@redhat.com>
> Cc: Coiby Xu <coxu@redhat.com>
> Cc: Hari Bathini <hbathini@linux.ibm.com>
> Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
> Cc: Simon Horman <horms@kernel.org>
> Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> ---
>  kexec/arch/arm/kexec-arm.c             |  5 ++++
>  kexec/arch/arm64/kexec-arm64.c         |  5 ++++
>  kexec/arch/cris/kexec-cris.c           |  4 +++
>  kexec/arch/hppa/kexec-hppa.c           |  5 ++++
>  kexec/arch/i386/kexec-x86.c            |  8 ++++++
>  kexec/arch/ia64/kexec-ia64.c           |  4 +++
>  kexec/arch/loongarch/kexec-loongarch.c |  5 ++++
>  kexec/arch/m68k/kexec-m68k.c           |  5 ++++
>  kexec/arch/mips/kexec-mips.c           |  4 +++
>  kexec/arch/ppc/kexec-ppc.c             |  4 +++
>  kexec/arch/ppc64/kexec-ppc64.c         |  5 ++++
>  kexec/arch/s390/kexec-s390.c           |  5 ++++
>  kexec/arch/sh/kexec-sh.c               |  5 ++++
>  kexec/arch/x86_64/kexec-x86_64.c       |  8 ++++++
>  kexec/kexec-syscall.h                  |  1 +
>  kexec/kexec.c                          | 40 ++++++++++++++++++++++----
>  kexec/kexec.h                          |  2 ++
>  17 files changed, 109 insertions(+), 6 deletions(-)

LGTM,

Acked-by: Baoquan He <bhe@redhat.com>


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

  parent reply	other threads:[~2024-07-08 10:30 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-07 15:24 [PATCH v3 0/3] Enable crash hotplug support on powerpc Sourabh Jain
2024-07-07 15:24 ` [PATCH v3 1/3] kexec_load: Use new kexec flag for hotplug support Sourabh Jain
2024-07-08  1:39   ` Baoquan He
2024-07-08  7:55     ` Sourabh Jain
2024-07-08 10:27       ` Baoquan He
2024-07-08 10:30   ` Baoquan He [this message]
2024-07-08 13:22     ` Sourabh Jain
2024-07-07 15:24 ` [PATCH v3 2/3] powerpc/kexec_load: add " Sourabh Jain
2024-07-07 15:24 ` [PATCH v3 3/3] doc/hotplug: update man and --help Sourabh Jain
2024-07-09  7:29 ` [PATCH v3 0/3] Enable crash hotplug support on powerpc Simon Horman
  -- strict thread matches above, loose matches on Subject: below --
2024-07-02  4:30 [PATCH v3 1/3] kexec_load: Use new kexec flag for hotplug support Sourabh Jain
2024-07-03  4:31 ` Baoquan He
2024-07-03 18:07   ` Sourabh Jain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zou/tF+wmuEKVT7c@MiWiFi-R3L-srv \
    --to=bhe@redhat.com \
    --cc=adityag@linux.ibm.com \
    --cc=coxu@redhat.com \
    --cc=hbathini@linux.ibm.com \
    --cc=horms@kernel.org \
    --cc=kexec@lists.infradead.org \
    --cc=mahesh@linux.ibm.com \
    --cc=sourabhjain@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox