From: sashiko-bot@kernel.org
To: "Radhey Shyam Pandey" <radhey.shyam.pandey@amd.com>,
robh@kernel.org, saravanak@kernel.org, akpm@linux-foundation.org,
david@kernel.org, ljs@kernel.org, liam@infradead.org,
vbabka@kernel.org, rppt@kernel.org, surenb@google.com,
mhocko@suse.com, m.szyprowski@samsung.com, robin.murphy@arm.com,
baoquan.he@linux.dev, pasha.tatashin@soleen.com,
pratyush@kernel.org
Cc: devicetree@vger.kernel.org, linux-mm@kvack.org,
kexec@lists.infradead.org, conor+dt@kernel.org
Subject: Re: [PATCH 3/4] mm/cma: reject CMA areas that overlap the kernel image
Date: Wed, 04 Nov 2026 16:29:50 +0000 [thread overview]
Message-ID: <sashiko-outbox-197614@kernel.org> (raw)
In-Reply-To: <20261103162429.2053989-4-radhey.shyam.pandey@amd.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] mm/cma: __pa_symbol(_text) triggers BUG() on arm32 DEBUG_VIRTUAL
--
commit efca63a89d010b4bf63ea1571c8931374f2ec14d
Author: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
mm/cma: reject CMA areas that overlap the kernel image
This commit updates cma_init_reserved_mem() to reject CMA regions that
overlap the kernel image range [_text, _end) so that cma_activate_area()
cannot free kernel image pages into MIGRATE_CMA.
> diff --git a/mm/cma.c b/mm/cma.c
> index 9c53b2b70dc8f..3231a53161cda 100644
> --- a/mm/cma.c
> +++ b/mm/cma.c
> @@ -31,6 +31,8 @@
> #include <linux/kmemleak.h>
> #include <trace/events/cma.h>
>
> +#include <asm/sections.h>
> +
> #include "internal.h"
> #include "cma.h"
> #include "mm_init.h"
> @@ -68,6 +70,16 @@ bool cma_has_dynamic_base(const struct cma *cma)
> return test_bit(CMA_DYNAMIC_BASE, &cma->flags);
> }
>
> +static bool cma_overlaps_kernel_image(phys_addr_t base, phys_addr_t size)
> +{
> + phys_addr_t end;
> +
> + if (check_add_overflow(base, size, &end))
> + return true;
> +
> + return base < __pa_symbol(_end) && __pa_symbol(_text) < end;
> +}
> +
> static unsigned long cma_bitmap_aligned_mask(const struct cma *cma,
> unsigned int align_order)
> {
> @@ -295,6 +307,15 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
> if (!size || !memblock_is_region_reserved(base, size))
> return -EINVAL;
>
> + if (cma_overlaps_kernel_image(base, size)) {
> + phys_addr_t text = __pa_symbol(_text);
> + phys_addr_t end = __pa_symbol(_end);
> +
> + pr_err("area %s (%pa, size %pa) overlaps kernel image [%pa-%pa]\n",
> + name ?: "(unnamed)", &base, &size, &text, &end);
> + return -EBUSY;
> + }
[Severity: High]
Is __pa_symbol(_text) safe to call in architecture-independent CMA code?
In include/asm-generic/sections.h, _text is noted as architecture-specific:
* _text, _data: architecture specific, don't use them in arch-independent code
On 32-bit ARM, arch/arm/kernel/vmlinux.lds.S places _text at the start of
.head.text before _stext:
.head.text : {
_text = .;
HEAD_TEXT
}
while arch/arm/include/asm/memory.h defines KERNEL_START starting at _stext
(or _sdata on CONFIG_XIP_KERNEL):
#ifdef CONFIG_XIP_KERNEL
#define KERNEL_START _sdata
#else
#define KERNEL_START _stext
#endif
#define KERNEL_END _end
When CONFIG_DEBUG_VIRTUAL=y is enabled on 32-bit ARM, __pa_symbol(_text)
calls __phys_addr_symbol() in arch/arm/mm/physaddr.c:
phys_addr_t __phys_addr_symbol(unsigned long x)
{
/* This is bounds checking against the kernel image only.
* __pa_symbol should only be used on kernel symbol addresses.
*/
VIRTUAL_BUG_ON(x < (unsigned long)KERNEL_START ||
x > (unsigned long)KERNEL_END);
return __pa_symbol_nodebug(x);
}
Because _text is below KERNEL_START on 32-bit ARM, won't calling
cma_init_reserved_mem() -> cma_overlaps_kernel_image() with
base < __pa_symbol(_end) trigger VIRTUAL_BUG_ON() during early boot?
In addition, on 32-bit ARM with CONFIG_XIP_KERNEL=y (where _text is linked
in ROM below PAGE_OFFSET while only [_sdata, _end) is in RAM) and on sparc64
(where [_text, _end) is linked at KERNBASE rather than in the PAGE_OFFSET
linear map), won't __pa_symbol(_text) also compute bogus physical addresses
for the kernel image?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261103162429.2053989-1-radhey.shyam.pandey@amd.com?part=3
next prev parent reply other threads:[~2026-11-04 16:29 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 16:24 [PATCH 0/4] kexec,mm/cma: do not run the next kernel from a fixed-base CMA area Radhey Shyam Pandey
2026-11-03 16:24 ` [PATCH 1/4] kexec: do not place the next kernel in a fixed-address " Radhey Shyam Pandey
2026-11-04 16:29 ` sashiko-bot
2026-11-03 16:24 ` [PATCH 2/4] of: reserved_mem: keep the reservation when node_init returns -EBUSY Radhey Shyam Pandey
2026-11-04 16:29 ` sashiko-bot
2026-11-03 16:24 ` [PATCH 3/4] mm/cma: reject CMA areas that overlap the kernel image Radhey Shyam Pandey
2026-11-04 16:29 ` sashiko-bot [this message]
2026-11-03 16:24 ` [PATCH 4/4] mm/cma: drop the duplicate alignment check in rmem_cma_setup() Radhey Shyam Pandey
2026-11-04 16:29 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-197614@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=baoquan.he@linux.dev \
--cc=conor+dt@kernel.org \
--cc=david@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kexec@lists.infradead.org \
--cc=liam@infradead.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mhocko@suse.com \
--cc=pasha.tatashin@soleen.com \
--cc=pratyush@kernel.org \
--cc=radhey.shyam.pandey@amd.com \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=rppt@kernel.org \
--cc=saravanak@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox