From: Alexander Graf <agraf@suse.de>
To: kvm@vger.kernel.org
Cc: Avi Kivity <avi@redhat.com>, kvm-ppc <kvm-ppc@vger.kernel.org>,
Hollis Blanchard <hollisb@us.ibm.com>,
Arnd Bergmann <arnd@arndb.de>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Kevin Wolf <kwolf@redhat.com>,
bphilips@suse.de, Marcelo Tosatti <mtosatti@redhat.com>,
Olof Johansson <olof@lixom.net>,
linuxppc-dev@ozlabs.org
Subject: [PATCH 27/28] Use hrtimers for the decrementer
Date: Mon, 02 Nov 2009 22:02:31 +0000 [thread overview]
Message-ID: <1257199351-2238-3-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1257199351-2238-1-git-send-email-agraf@suse.de>
Following S390's good example we should use hrtimers for the decrementer too!
This patch converts the timer from the old mechanism to hrtimers.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v6 -> v7:
- remove non-hrtimer export
---
arch/powerpc/include/asm/kvm_host.h | 6 ++++--
arch/powerpc/kernel/ppc_ksyms.c | 3 +--
arch/powerpc/kvm/emulate.c | 18 +++++++++++-------
arch/powerpc/kvm/powerpc.c | 20 ++++++++++++++++++--
4 files changed, 34 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 2cff5fe..1201f62 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -21,7 +21,8 @@
#define __POWERPC_KVM_HOST_H__
#include <linux/mutex.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/kvm_types.h>
#include <asm/kvm_asm.h>
@@ -250,7 +251,8 @@ struct kvm_vcpu_arch {
u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
- struct timer_list dec_timer;
+ struct hrtimer dec_timer;
+ struct tasklet_struct tasklet;
u64 dec_jiffies;
unsigned long pending_exceptions;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index baf778c..c8b27bb 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -163,12 +163,11 @@ EXPORT_SYMBOL(screen_info);
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(timer_interrupt);
EXPORT_SYMBOL(irq_desc);
+EXPORT_SYMBOL(tb_ticks_per_jiffy);
EXPORT_SYMBOL(cacheable_memcpy);
EXPORT_SYMBOL(cacheable_memzero);
#endif
-EXPORT_SYMBOL(tb_ticks_per_jiffy);
-
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(switch_mmu_context);
#endif
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 1ec5e07..4a9ac66 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -18,7 +18,7 @@
*/
#include <linux/jiffies.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kvm_host.h>
@@ -79,12 +79,13 @@ static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
{
- unsigned long nr_jiffies;
+ unsigned long dec_nsec;
+ pr_debug("mtDEC: %x\n", vcpu->arch.dec);
#ifdef CONFIG_PPC64
/* POWER4+ triggers a dec interrupt if the value is < 0 */
if (vcpu->arch.dec & 0x80000000) {
- del_timer(&vcpu->arch.dec_timer);
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
kvmppc_core_queue_dec(vcpu);
return;
}
@@ -94,12 +95,15 @@ void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
* that's how we convert the guest DEC value to the number of
* host ticks. */
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+ dec_nsec = vcpu->arch.dec;
+ dec_nsec *= 1000;
+ dec_nsec /= tb_ticks_per_usec;
+ hrtimer_start(&vcpu->arch.dec_timer, ktime_set(0, dec_nsec),
+ HRTIMER_MODE_REL);
vcpu->arch.dec_jiffies = get_tb();
- nr_jiffies = vcpu->arch.dec / tb_ticks_per_jiffy;
- mod_timer(&vcpu->arch.dec_timer,
- get_jiffies_64() + nr_jiffies);
} else {
- del_timer(&vcpu->arch.dec_timer);
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
}
}
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 4ae3490..4c582ed 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -23,6 +23,7 @@
#include <linux/kvm_host.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
+#include <linux/hrtimer.h>
#include <linux/fs.h>
#include <asm/cputable.h>
#include <asm/uaccess.h>
@@ -209,10 +210,25 @@ static void kvmppc_decrementer_func(unsigned long data)
}
}
+/*
+ * low level hrtimer wake routine. Because this runs in hardirq context
+ * we schedule a tasklet to do the real work.
+ */
+enum hrtimer_restart kvmppc_decrementer_wakeup(struct hrtimer *timer)
+{
+ struct kvm_vcpu *vcpu;
+
+ vcpu = container_of(timer, struct kvm_vcpu, arch.dec_timer);
+ tasklet_schedule(&vcpu->arch.tasklet);
+
+ return HRTIMER_NORESTART;
+}
+
int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
{
- setup_timer(&vcpu->arch.dec_timer, kvmppc_decrementer_func,
- (unsigned long)vcpu);
+ hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ tasklet_init(&vcpu->arch.tasklet, kvmppc_decrementer_func, (ulong)vcpu);
+ vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup;
return 0;
}
--
1.6.0.2
prev parent reply other threads:[~2009-11-02 22:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-02 22:02 [PATCH 08/28] Add SLB switching code for entry/exit Alexander Graf
2009-11-02 22:02 ` [PATCH 20/28] Split init_new_context and destroy_context Alexander Graf
2009-11-02 22:02 ` Alexander Graf [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1257199351-2238-3-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=arnd@arndb.de \
--cc=avi@redhat.com \
--cc=benh@kernel.crashing.org \
--cc=bphilips@suse.de \
--cc=hollisb@us.ibm.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=kwolf@redhat.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=mtosatti@redhat.com \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox