From: Andrew Jones <ajones@ventanamicro.com>
To: kvm-riscv@lists.infradead.org
Subject: [PATCH 7/9] RISC-V: lib: Improve memset assembler formatting
Date: Thu, 27 Oct 2022 15:02:45 +0200 [thread overview]
Message-ID: <20221027130247.31634-8-ajones@ventanamicro.com> (raw)
In-Reply-To: <20221027130247.31634-1-ajones@ventanamicro.com>
Aligning the first operand of each instructions with a tab is a
typical style which improves readability. Apply it to memset.S.
While there, we also make a small grammar change to a comment.
No functional change intended.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
---
arch/riscv/lib/memset.S | 143 ++++++++++++++++++++--------------------
1 file changed, 72 insertions(+), 71 deletions(-)
diff --git a/arch/riscv/lib/memset.S b/arch/riscv/lib/memset.S
index 34c5360c6705..e613c5c27998 100644
--- a/arch/riscv/lib/memset.S
+++ b/arch/riscv/lib/memset.S
@@ -3,111 +3,112 @@
* Copyright (C) 2013 Regents of the University of California
*/
-
#include <linux/linkage.h>
#include <asm/asm.h>
/* void *memset(void *, int, size_t) */
ENTRY(__memset)
WEAK(memset)
- move t0, a0 /* Preserve return value */
+ move t0, a0 /* Preserve return value */
/* Defer to byte-oriented fill for small sizes */
- sltiu a3, a2, 16
- bnez a3, 4f
+ sltiu a3, a2, 16
+ bnez a3, 4f
/*
* Round to nearest XLEN-aligned address
- * greater than or equal to start address
+ * greater than or equal to the start address.
*/
- addi a3, t0, SZREG-1
- andi a3, a3, ~(SZREG-1)
- beq a3, t0, 2f /* Skip if already aligned */
+ addi a3, t0, SZREG-1
+ andi a3, a3, ~(SZREG-1)
+ beq a3, t0, 2f /* Skip if already aligned */
+
/* Handle initial misalignment */
- sub a4, a3, t0
+ sub a4, a3, t0
1:
- sb a1, 0(t0)
- addi t0, t0, 1
- bltu t0, a3, 1b
- sub a2, a2, a4 /* Update count */
+ sb a1, 0(t0)
+ addi t0, t0, 1
+ bltu t0, a3, 1b
+ sub a2, a2, a4 /* Update count */
2: /* Duff's device with 32 XLEN stores per iteration */
/* Broadcast value into all bytes */
- andi a1, a1, 0xff
- slli a3, a1, 8
- or a1, a3, a1
- slli a3, a1, 16
- or a1, a3, a1
+ andi a1, a1, 0xff
+ slli a3, a1, 8
+ or a1, a3, a1
+ slli a3, a1, 16
+ or a1, a3, a1
#ifdef CONFIG_64BIT
- slli a3, a1, 32
- or a1, a3, a1
+ slli a3, a1, 32
+ or a1, a3, a1
#endif
/* Calculate end address */
- andi a4, a2, ~(SZREG-1)
- add a3, t0, a4
+ andi a4, a2, ~(SZREG-1)
+ add a3, t0, a4
- andi a4, a4, 31*SZREG /* Calculate remainder */
- beqz a4, 3f /* Shortcut if no remainder */
- neg a4, a4
- addi a4, a4, 32*SZREG /* Calculate initial offset */
+ andi a4, a4, 31*SZREG /* Calculate remainder */
+ beqz a4, 3f /* Shortcut if no remainder */
+ neg a4, a4
+ addi a4, a4, 32*SZREG /* Calculate initial offset */
/* Adjust start address with offset */
- sub t0, t0, a4
+ sub t0, t0, a4
/* Jump into loop body */
/* Assumes 32-bit instruction lengths */
- la a5, 3f
+ la a5, 3f
#ifdef CONFIG_64BIT
- srli a4, a4, 1
+ srli a4, a4, 1
#endif
- add a5, a5, a4
- jr a5
+ add a5, a5, a4
+ jr a5
3:
- REG_S a1, 0(t0)
- REG_S a1, SZREG(t0)
- REG_S a1, 2*SZREG(t0)
- REG_S a1, 3*SZREG(t0)
- REG_S a1, 4*SZREG(t0)
- REG_S a1, 5*SZREG(t0)
- REG_S a1, 6*SZREG(t0)
- REG_S a1, 7*SZREG(t0)
- REG_S a1, 8*SZREG(t0)
- REG_S a1, 9*SZREG(t0)
- REG_S a1, 10*SZREG(t0)
- REG_S a1, 11*SZREG(t0)
- REG_S a1, 12*SZREG(t0)
- REG_S a1, 13*SZREG(t0)
- REG_S a1, 14*SZREG(t0)
- REG_S a1, 15*SZREG(t0)
- REG_S a1, 16*SZREG(t0)
- REG_S a1, 17*SZREG(t0)
- REG_S a1, 18*SZREG(t0)
- REG_S a1, 19*SZREG(t0)
- REG_S a1, 20*SZREG(t0)
- REG_S a1, 21*SZREG(t0)
- REG_S a1, 22*SZREG(t0)
- REG_S a1, 23*SZREG(t0)
- REG_S a1, 24*SZREG(t0)
- REG_S a1, 25*SZREG(t0)
- REG_S a1, 26*SZREG(t0)
- REG_S a1, 27*SZREG(t0)
- REG_S a1, 28*SZREG(t0)
- REG_S a1, 29*SZREG(t0)
- REG_S a1, 30*SZREG(t0)
- REG_S a1, 31*SZREG(t0)
- addi t0, t0, 32*SZREG
- bltu t0, a3, 3b
- andi a2, a2, SZREG-1 /* Update count */
+ REG_S a1, 0(t0)
+ REG_S a1, SZREG(t0)
+ REG_S a1, 2*SZREG(t0)
+ REG_S a1, 3*SZREG(t0)
+ REG_S a1, 4*SZREG(t0)
+ REG_S a1, 5*SZREG(t0)
+ REG_S a1, 6*SZREG(t0)
+ REG_S a1, 7*SZREG(t0)
+ REG_S a1, 8*SZREG(t0)
+ REG_S a1, 9*SZREG(t0)
+ REG_S a1, 10*SZREG(t0)
+ REG_S a1, 11*SZREG(t0)
+ REG_S a1, 12*SZREG(t0)
+ REG_S a1, 13*SZREG(t0)
+ REG_S a1, 14*SZREG(t0)
+ REG_S a1, 15*SZREG(t0)
+ REG_S a1, 16*SZREG(t0)
+ REG_S a1, 17*SZREG(t0)
+ REG_S a1, 18*SZREG(t0)
+ REG_S a1, 19*SZREG(t0)
+ REG_S a1, 20*SZREG(t0)
+ REG_S a1, 21*SZREG(t0)
+ REG_S a1, 22*SZREG(t0)
+ REG_S a1, 23*SZREG(t0)
+ REG_S a1, 24*SZREG(t0)
+ REG_S a1, 25*SZREG(t0)
+ REG_S a1, 26*SZREG(t0)
+ REG_S a1, 27*SZREG(t0)
+ REG_S a1, 28*SZREG(t0)
+ REG_S a1, 29*SZREG(t0)
+ REG_S a1, 30*SZREG(t0)
+ REG_S a1, 31*SZREG(t0)
+
+ addi t0, t0, 32*SZREG
+ bltu t0, a3, 3b
+ andi a2, a2, SZREG-1 /* Update count */
4:
/* Handle trailing misalignment */
- beqz a2, 6f
- add a3, t0, a2
+ beqz a2, 6f
+ add a3, t0, a2
5:
- sb a1, 0(t0)
- addi t0, t0, 1
- bltu t0, a3, 5b
+ sb a1, 0(t0)
+ addi t0, t0, 1
+ bltu t0, a3, 5b
6:
ret
END(__memset)
--
2.37.3
next prev parent reply other threads:[~2022-10-27 13:02 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-27 13:02 [PATCH 0/9] RISC-V: Apply Zicboz to clear_page and memset Andrew Jones
2022-10-27 13:02 ` [PATCH 1/9] RISC-V: Factor out body of riscv_init_cbom_blocksize loop Andrew Jones
2022-10-27 14:58 ` Heiko Stübner
2022-10-30 20:31 ` Conor Dooley
2022-10-31 8:11 ` Andrew Jones
2022-10-27 13:02 ` [PATCH 2/9] RISC-V: Add Zicboz detection and block size parsing Andrew Jones
2022-10-27 15:03 ` Heiko Stübner
2022-10-27 15:42 ` Andrew Jones
2022-10-30 20:47 ` Conor Dooley
2022-10-31 8:12 ` Andrew Jones
2022-11-13 22:24 ` Conor Dooley
2022-11-14 8:29 ` Andrew Jones
2022-10-27 13:02 ` [PATCH 3/9] RISC-V: insn-def: Define cbo.zero Andrew Jones
2022-10-27 15:37 ` Heiko Stübner
2022-10-30 21:08 ` Conor Dooley
2022-10-31 8:18 ` Andrew Jones
2022-10-27 13:02 ` [PATCH 4/9] RISC-V: Use Zicboz in clear_page when available Andrew Jones
2022-10-27 13:02 ` [PATCH 5/9] RISC-V: KVM: Provide UAPI for Zicboz block size Andrew Jones
2022-10-30 21:23 ` Conor Dooley
2022-11-27 5:37 ` Anup Patel
2022-10-27 13:02 ` [PATCH 6/9] RISC-V: KVM: Expose Zicboz to the guest Andrew Jones
2022-10-30 21:23 ` Conor Dooley
2022-11-27 5:38 ` Anup Patel
2022-10-27 13:02 ` Andrew Jones [this message]
2022-10-30 21:27 ` [PATCH 7/9] RISC-V: lib: Improve memset assembler formatting Conor Dooley
2022-10-27 13:02 ` [PATCH 8/9] RISC-V: lib: Use named labels in memset Andrew Jones
2022-10-30 22:15 ` Conor Dooley
2022-10-31 8:24 ` Andrew Jones
2022-10-27 13:02 ` [PATCH 9/9] RISC-V: Use Zicboz in memset when available Andrew Jones
2022-10-30 22:35 ` Conor Dooley
2022-10-31 8:30 ` Andrew Jones
2022-11-03 2:43 ` Palmer Dabbelt
2022-11-03 10:21 ` Andrew Jones
2022-10-29 9:59 ` [PATCH 0/9] RISC-V: Apply Zicboz to clear_page and memset Andrew Jones
2022-10-30 20:23 ` Conor Dooley
2022-10-31 8:39 ` Andrew Jones
2022-11-01 10:37 ` Andrew Jones
2022-11-01 10:53 ` Andrew Jones
2022-12-20 12:55 ` Conor Dooley
2022-12-26 18:56 ` Andrew Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221027130247.31634-8-ajones@ventanamicro.com \
--to=ajones@ventanamicro.com \
--cc=kvm-riscv@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox