From: Sean Christopherson <seanjc@google.com>
To: kvm-riscv@lists.infradead.org
Subject: [PATCH 34/44] KVM: VMX: Shuffle support checks and hardware enabling code around
Date: Wed, 2 Nov 2022 23:19:01 +0000 [thread overview]
Message-ID: <20221102231911.3107438-35-seanjc@google.com> (raw)
In-Reply-To: <20221102231911.3107438-1-seanjc@google.com>
Reorder code in vmx.c so that the VMX support check helpers reside above
the hardware enabling helpers, which will allow KVM to perform support
checks during hardware enabling (in a future patch).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/vmx/vmx.c | 212 ++++++++++++++++++++---------------------
1 file changed, 106 insertions(+), 106 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 2a7e62d0707d..07d86535c032 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2485,77 +2485,6 @@ static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
}
}
-static int kvm_cpu_vmxon(u64 vmxon_pointer)
-{
- u64 msr;
-
- cr4_set_bits(X86_CR4_VMXE);
-
- asm_volatile_goto("1: vmxon %[vmxon_pointer]\n\t"
- _ASM_EXTABLE(1b, %l[fault])
- : : [vmxon_pointer] "m"(vmxon_pointer)
- : : fault);
- return 0;
-
-fault:
- WARN_ONCE(1, "VMXON faulted, MSR_IA32_FEAT_CTL (0x3a) = 0x%llx\n",
- rdmsrl_safe(MSR_IA32_FEAT_CTL, &msr) ? 0xdeadbeef : msr);
- cr4_clear_bits(X86_CR4_VMXE);
-
- return -EFAULT;
-}
-
-static int vmx_hardware_enable(void)
-{
- int cpu = raw_smp_processor_id();
- u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
- int r;
-
- if (cr4_read_shadow() & X86_CR4_VMXE)
- return -EBUSY;
-
- /*
- * This can happen if we hot-added a CPU but failed to allocate
- * VP assist page for it.
- */
- if (static_branch_unlikely(&enable_evmcs) &&
- !hv_get_vp_assist_page(cpu))
- return -EFAULT;
-
- intel_pt_handle_vmx(1);
-
- r = kvm_cpu_vmxon(phys_addr);
- if (r) {
- intel_pt_handle_vmx(0);
- return r;
- }
-
- if (enable_ept)
- ept_sync_global();
-
- return 0;
-}
-
-static void vmclear_local_loaded_vmcss(void)
-{
- int cpu = raw_smp_processor_id();
- struct loaded_vmcs *v, *n;
-
- list_for_each_entry_safe(v, n, &per_cpu(loaded_vmcss_on_cpu, cpu),
- loaded_vmcss_on_cpu_link)
- __loaded_vmcs_clear(v);
-}
-
-static void vmx_hardware_disable(void)
-{
- vmclear_local_loaded_vmcss();
-
- if (cpu_vmxoff())
- kvm_spurious_fault();
-
- intel_pt_handle_vmx(0);
-}
-
/*
* There is no X86_FEATURE for SGX yet, but anyway we need to query CPUID
* directly instead of going through cpu_has(), to ensure KVM is trapping
@@ -2781,6 +2710,112 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
return 0;
}
+static bool __init kvm_is_vmx_supported(void)
+{
+ if (!cpu_has_vmx()) {
+ pr_err("CPU doesn't support VMX\n");
+ return false;
+ }
+
+ if (!boot_cpu_has(X86_FEATURE_MSR_IA32_FEAT_CTL) ||
+ !boot_cpu_has(X86_FEATURE_VMX)) {
+ pr_err("VMX not enabled in MSR_IA32_FEAT_CTL\n");
+ return false;
+ }
+
+ return true;
+}
+
+static int __init vmx_check_processor_compat(void)
+{
+ struct vmcs_config vmcs_conf;
+ struct vmx_capability vmx_cap;
+
+ if (!kvm_is_vmx_supported())
+ return -EIO;
+
+ if (setup_vmcs_config(&vmcs_conf, &vmx_cap) < 0)
+ return -EIO;
+ if (nested)
+ nested_vmx_setup_ctls_msrs(&vmcs_conf, vmx_cap.ept);
+ if (memcmp(&vmcs_config, &vmcs_conf, sizeof(struct vmcs_config)) != 0) {
+ pr_err("CPU %d feature inconsistency!\n", smp_processor_id());
+ return -EIO;
+ }
+ return 0;
+}
+
+static int kvm_cpu_vmxon(u64 vmxon_pointer)
+{
+ u64 msr;
+
+ cr4_set_bits(X86_CR4_VMXE);
+
+ asm_volatile_goto("1: vmxon %[vmxon_pointer]\n\t"
+ _ASM_EXTABLE(1b, %l[fault])
+ : : [vmxon_pointer] "m"(vmxon_pointer)
+ : : fault);
+ return 0;
+
+fault:
+ WARN_ONCE(1, "VMXON faulted, MSR_IA32_FEAT_CTL (0x3a) = 0x%llx\n",
+ rdmsrl_safe(MSR_IA32_FEAT_CTL, &msr) ? 0xdeadbeef : msr);
+ cr4_clear_bits(X86_CR4_VMXE);
+
+ return -EFAULT;
+}
+
+static int vmx_hardware_enable(void)
+{
+ int cpu = raw_smp_processor_id();
+ u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
+ int r;
+
+ if (cr4_read_shadow() & X86_CR4_VMXE)
+ return -EBUSY;
+
+ /*
+ * This can happen if we hot-added a CPU but failed to allocate
+ * VP assist page for it.
+ */
+ if (static_branch_unlikely(&enable_evmcs) &&
+ !hv_get_vp_assist_page(cpu))
+ return -EFAULT;
+
+ intel_pt_handle_vmx(1);
+
+ r = kvm_cpu_vmxon(phys_addr);
+ if (r) {
+ intel_pt_handle_vmx(0);
+ return r;
+ }
+
+ if (enable_ept)
+ ept_sync_global();
+
+ return 0;
+}
+
+static void vmclear_local_loaded_vmcss(void)
+{
+ int cpu = raw_smp_processor_id();
+ struct loaded_vmcs *v, *n;
+
+ list_for_each_entry_safe(v, n, &per_cpu(loaded_vmcss_on_cpu, cpu),
+ loaded_vmcss_on_cpu_link)
+ __loaded_vmcs_clear(v);
+}
+
+static void vmx_hardware_disable(void)
+{
+ vmclear_local_loaded_vmcss();
+
+ if (cpu_vmxoff())
+ kvm_spurious_fault();
+
+ intel_pt_handle_vmx(0);
+}
+
struct vmcs *alloc_vmcs_cpu(bool shadow, int cpu, gfp_t flags)
{
int node = cpu_to_node(cpu);
@@ -7466,41 +7501,6 @@ static int vmx_vm_init(struct kvm *kvm)
return 0;
}
-static bool __init kvm_is_vmx_supported(void)
-{
- if (!cpu_has_vmx()) {
- pr_err("CPU doesn't support VMX\n");
- return false;
- }
-
- if (!boot_cpu_has(X86_FEATURE_MSR_IA32_FEAT_CTL) ||
- !boot_cpu_has(X86_FEATURE_VMX)) {
- pr_err("VMX not enabled in MSR_IA32_FEAT_CTL\n");
- return false;
- }
-
- return true;
-}
-
-static int __init vmx_check_processor_compat(void)
-{
- struct vmcs_config vmcs_conf;
- struct vmx_capability vmx_cap;
-
- if (!kvm_is_vmx_supported())
- return -EIO;
-
- if (setup_vmcs_config(&vmcs_conf, &vmx_cap) < 0)
- return -EIO;
- if (nested)
- nested_vmx_setup_ctls_msrs(&vmcs_conf, vmx_cap.ept);
- if (memcmp(&vmcs_config, &vmcs_conf, sizeof(struct vmcs_config)) != 0) {
- pr_err("CPU %d feature inconsistency!\n", smp_processor_id());
- return -EIO;
- }
- return 0;
-}
-
static u8 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
{
u8 cache;
--
2.38.1.431.g37b22c650d-goog
next prev parent reply other threads:[~2022-11-02 23:19 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-02 23:18 [PATCH 00/44] KVM: Rework kvm_init() and hardware enabling Sean Christopherson
2022-11-02 23:18 ` [PATCH 01/44] KVM: Register /dev/kvm as the _very_ last thing during initialization Sean Christopherson
2022-11-02 23:18 ` [PATCH 02/44] KVM: Initialize IRQ FD after arch hardware setup Sean Christopherson
2022-11-04 0:41 ` Chao Gao
2022-11-04 20:15 ` Sean Christopherson
2022-11-02 23:18 ` [PATCH 03/44] KVM: Allocate cpus_hardware_enabled " Sean Christopherson
2022-11-04 5:37 ` Yuan Yao
2022-11-02 23:18 ` [PATCH 04/44] KVM: Teardown VFIO ops earlier in kvm_exit() Sean Christopherson
2022-11-03 12:46 ` Cornelia Huck
2022-11-07 17:56 ` Eric Farman
2022-11-02 23:18 ` [PATCH 05/44] KVM: s390: Unwind kvm_arch_init() piece-by-piece() if a step fails Sean Christopherson
2022-11-07 17:57 ` Eric Farman
2022-11-02 23:18 ` [PATCH 06/44] KVM: s390: Move hardware setup/unsetup to init/exit Sean Christopherson
2022-11-07 17:58 ` Eric Farman
2022-11-02 23:18 ` [PATCH 07/44] KVM: x86: Do timer initialization after XCR0 configuration Sean Christopherson
2022-11-02 23:18 ` [PATCH 08/44] KVM: x86: Move hardware setup/unsetup to init/exit Sean Christopherson
2022-11-04 6:22 ` Yuan Yao
2022-11-04 16:31 ` Sean Christopherson
2022-11-02 23:18 ` [PATCH 09/44] KVM: Drop arch hardware (un)setup hooks Sean Christopherson
2022-11-07 3:01 ` Anup Patel
2022-11-07 18:22 ` Eric Farman
2022-11-02 23:18 ` [PATCH 10/44] KVM: VMX: Clean up eVMCS enabling if KVM initialization fails Sean Christopherson
2022-11-03 14:01 ` Paolo Bonzini
2022-11-03 14:04 ` Paolo Bonzini
2022-11-03 14:28 ` Vitaly Kuznetsov
2022-11-11 1:38 ` Sean Christopherson
2022-11-15 9:30 ` Vitaly Kuznetsov
2022-11-02 23:18 ` [PATCH 11/44] KVM: x86: Move guts of kvm_arch_init() to standalone helper Sean Christopherson
2022-11-02 23:18 ` [PATCH 12/44] KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace Sean Christopherson
2022-11-02 23:18 ` [PATCH 13/44] KVM: x86: Serialize vendor module initialization (hardware setup) Sean Christopherson
2022-11-16 1:46 ` Huang, Kai
2022-11-16 15:52 ` Sean Christopherson
2022-11-02 23:18 ` [PATCH 14/44] KVM: arm64: Simplify the CPUHP logic Sean Christopherson
2022-11-02 23:18 ` [PATCH 15/44] KVM: arm64: Free hypervisor allocations if vector slot init fails Sean Christopherson
2022-11-02 23:18 ` [PATCH 16/44] KVM: arm64: Unregister perf callbacks if hypervisor finalization fails Sean Christopherson
2022-11-02 23:18 ` [PATCH 17/44] KVM: arm64: Do arm/arch initialiation without bouncing through kvm_init() Sean Christopherson
2022-11-03 7:25 ` Philippe Mathieu-Daudé
2022-11-03 15:29 ` Sean Christopherson
2022-11-02 23:18 ` [PATCH 18/44] KVM: arm64: Mark kvm_arm_init() and its unique descendants as __init Sean Christopherson
2022-11-02 23:18 ` [PATCH 19/44] KVM: MIPS: Hardcode callbacks to hardware virtualization extensions Sean Christopherson
2022-11-02 23:18 ` [PATCH 20/44] KVM: MIPS: Setup VZ emulation? directly from kvm_mips_init() Sean Christopherson
2022-11-03 7:10 ` Philippe Mathieu-Daudé
2022-11-02 23:18 ` [PATCH 21/44] KVM: MIPS: Register die notifier prior to kvm_init() Sean Christopherson
2022-11-03 7:12 ` Philippe Mathieu-Daudé
2022-11-02 23:18 ` [PATCH 22/44] KVM: RISC-V: Do arch init directly in riscv_kvm_init() Sean Christopherson
2022-11-03 7:14 ` Philippe Mathieu-Daudé
2022-11-07 3:05 ` Anup Patel
2022-11-02 23:18 ` [PATCH 23/44] KVM: RISC-V: Tag init functions and data with __init, __ro_after_init Sean Christopherson
2022-11-07 3:10 ` Anup Patel
2022-11-02 23:18 ` [PATCH 24/44] KVM: PPC: Move processor compatibility check to module init Sean Christopherson
2022-11-02 23:18 ` [PATCH 25/44] KVM: s390: Do s390 specific init without bouncing through kvm_init() Sean Christopherson
2022-11-03 7:16 ` Philippe Mathieu-Daudé
2022-11-03 12:44 ` Claudio Imbrenda
2022-11-03 13:21 ` Claudio Imbrenda
2022-11-07 18:22 ` Eric Farman
2022-11-02 23:18 ` [PATCH 26/44] KVM: s390: Mark __kvm_s390_init() and its descendants as __init Sean Christopherson
2022-11-07 18:22 ` Eric Farman
2022-11-02 23:18 ` [PATCH 27/44] KVM: Drop kvm_arch_{init,exit}() hooks Sean Christopherson
2022-11-03 7:18 ` Philippe Mathieu-Daudé
2022-11-07 3:13 ` Anup Patel
2022-11-07 19:08 ` Eric Farman
2022-11-02 23:18 ` [PATCH 28/44] KVM: VMX: Make VMCS configuration/capabilities structs read-only after init Sean Christopherson
2022-11-02 23:18 ` [PATCH 29/44] KVM: x86: Do CPU compatibility checks in x86 code Sean Christopherson
2022-11-02 23:18 ` [PATCH 30/44] KVM: Drop kvm_arch_check_processor_compat() hook Sean Christopherson
2022-11-03 7:20 ` Philippe Mathieu-Daudé
2022-11-07 3:16 ` Anup Patel
2022-11-07 19:08 ` Eric Farman
2022-11-02 23:18 ` [PATCH 31/44] KVM: x86: Use KBUILD_MODNAME to specify vendor module name Sean Christopherson
2022-11-02 23:18 ` [PATCH 32/44] KVM: x86: Unify pr_fmt to use module name for all KVM modules Sean Christopherson
2022-11-10 7:31 ` Robert Hoo
2022-11-10 16:50 ` Sean Christopherson
2022-11-30 23:02 ` Sean Christopherson
2022-12-01 1:34 ` Robert Hoo
2022-11-02 23:19 ` [PATCH 33/44] KVM: x86: Do VMX/SVM support checks directly in vendor code Sean Christopherson
2022-11-03 15:08 ` Paolo Bonzini
2022-11-03 18:35 ` Sean Christopherson
2022-11-03 18:46 ` Paolo Bonzini
2022-11-03 18:58 ` Sean Christopherson
2022-11-04 8:02 ` Paolo Bonzini
2022-11-04 15:40 ` Sean Christopherson
2022-11-15 22:50 ` Huang, Kai
2022-11-16 1:56 ` Sean Christopherson
2022-11-02 23:19 ` Sean Christopherson [this message]
2022-11-02 23:19 ` [PATCH 35/44] KVM: SVM: Check for SVM support in CPU compatibility checks Sean Christopherson
2022-11-02 23:19 ` [PATCH 36/44] KVM: x86: Do compatibility checks when onlining CPU Sean Christopherson
2022-11-03 15:17 ` Paolo Bonzini
2022-11-03 17:44 ` Sean Christopherson
2022-11-03 17:57 ` Paolo Bonzini
2022-11-03 21:04 ` Isaku Yamahata
2022-11-03 22:34 ` Sean Christopherson
2022-11-04 7:18 ` Isaku Yamahata
2022-11-11 0:06 ` Sean Christopherson
2022-11-02 23:19 ` [PATCH 37/44] KVM: Rename and move CPUHP_AP_KVM_STARTING to ONLINE section Sean Christopherson
2022-11-10 7:26 ` Robert Hoo
2022-11-10 16:49 ` Sean Christopherson
2022-11-02 23:19 ` [PATCH 38/44] KVM: Disable CPU hotplug during hardware enabling Sean Christopherson
2022-11-10 1:08 ` Huang, Kai
2022-11-10 2:20 ` Huang, Kai
2022-11-10 1:33 ` Huang, Kai
2022-11-10 2:11 ` Huang, Kai
2022-11-10 16:58 ` Sean Christopherson
2022-11-15 20:16 ` Sean Christopherson
2022-11-15 20:21 ` Sean Christopherson
2022-11-16 12:23 ` Huang, Kai
2022-11-16 17:11 ` Sean Christopherson
2022-11-17 1:39 ` Huang, Kai
2022-11-17 15:16 ` Sean Christopherson
2022-11-02 23:19 ` [PATCH 39/44] KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock Sean Christopherson
2022-11-03 15:23 ` Paolo Bonzini
2022-11-03 17:53 ` Sean Christopherson
2022-11-02 23:19 ` [PATCH 40/44] KVM: Remove on_each_cpu(hardware_disable_nolock) in kvm_exit() Sean Christopherson
2022-11-02 23:19 ` [PATCH 41/44] KVM: Use a per-CPU variable to track which CPUs have enabled virtualization Sean Christopherson
2022-11-02 23:19 ` [PATCH 42/44] KVM: Make hardware_enable_failed a local variable in the "enable all" path Sean Christopherson
2022-11-02 23:19 ` [PATCH 43/44] KVM: Register syscore (suspend/resume) ops early in kvm_init() Sean Christopherson
2022-11-02 23:19 ` [PATCH 44/44] KVM: Opt out of generic hardware enabling on s390 and PPC Sean Christopherson
2022-11-07 3:23 ` Anup Patel
2022-11-03 12:08 ` [PATCH 00/44] KVM: Rework kvm_init() and hardware enabling Christian Borntraeger
2022-11-03 15:27 ` Paolo Bonzini
2022-11-04 7:17 ` Isaku Yamahata
2022-11-04 7:59 ` Paolo Bonzini
2022-11-04 20:27 ` Sean Christopherson
2022-11-07 21:46 ` Isaku Yamahata
2022-11-08 1:09 ` Huang, Kai
2022-11-08 5:43 ` Isaku Yamahata
2022-11-08 8:56 ` Huang, Kai
2022-11-08 10:35 ` Huang, Kai
2022-11-08 17:46 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221102231911.3107438-35-seanjc@google.com \
--to=seanjc@google.com \
--cc=kvm-riscv@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox