From: Janosch Frank <frankja@linux.ibm.com>
To: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: kvm@vger.kernel.org, linux-s390@vger.kernel.org,
david@redhat.com, thuth@redhat.com, seiden@linux.ibm.com,
mhartmay@linux.ibm.com
Subject: Re: [kvm-unit-tests PATCH 7/8] s390x: snippets: Add PV support
Date: Fri, 26 Nov 2021 14:28:15 +0100 [thread overview]
Message-ID: <08052bad-b494-c99b-27b3-bcfef0aa94fd@linux.ibm.com> (raw)
In-Reply-To: <20211123122219.3c18cf98@p-imbrenda>
On 11/23/21 12:22, Claudio Imbrenda wrote:
> On Tue, 23 Nov 2021 10:39:55 +0000
> Janosch Frank <frankja@linux.ibm.com> wrote:
>
>> To create a pv-snippet we need to generate an se-header. This can be
>> done using a currently not released tool. This tool creates a
>> se-header similar to `genprotimg` with the difference that the image
>> itself will not be encrypted.
>>
>> The image for which we want to create a header must be a binary and
>> padded to 4k. Therefore, we convert the compiled snippet to a binary,
>> padd it to 4k, generate the header and convert it back to s390-64bit
>> elf.
>>
>> The name of the tool can be specified using the config argument
>> `--gen-se-header=`. The pv-snipptes will only be built when this
>> option is specified. Furthermore, the Hostkey-Document must be
>> specified. If not the build will be skipped.
>>
>> The host-snippet relation can be specified using the `pv-snippets`
>> variable in s390x/Makefile, similar to the non-pv-snippets in
>> 2f6fdb4a (s390x: snippets: Add snippet compilation, 2021-06-22)
>>
>> Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
>
> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
>
> but see a comment below
>
>> ---
>> .gitignore | 2 ++
>> configure | 8 ++++++
>> lib/s390x/snippet.h | 7 +++++
>> s390x/Makefile | 67 +++++++++++++++++++++++++++++++++++++--------
>> 4 files changed, 73 insertions(+), 11 deletions(-)
>>
>> diff --git a/.gitignore b/.gitignore
>> index 3d5be622..28a197bf 100644
>> --- a/.gitignore
>> +++ b/.gitignore
>> @@ -25,3 +25,5 @@ cscope.*
>> /api/dirty-log-perf
>> /s390x/*.bin
>> /s390x/snippets/*/*.gbin
>> +/s390x/snippets/*/*.hdr
>> +/s390x/snippets/*/*.*obj
>> \ No newline at end of file
>> diff --git a/configure b/configure
>> index 1d4d855e..9210912f 100755
>> --- a/configure
>> +++ b/configure
>> @@ -26,6 +26,7 @@ target=
>> errata_force=0
>> erratatxt="$srcdir/errata.txt"
>> host_key_document=
>> +gen_se_header=
>> page_size=
>> earlycon=
>>
>> @@ -54,6 +55,9 @@ usage() {
>> --host-key-document=HOST_KEY_DOCUMENT
>> Specify the machine-specific host-key document for creating
>> a PVM image with 'genprotimg' (s390x only)
>> + --gen-se-header=GEN_SE_HEADER
>> + Provide an executable to generate a PV header
>> + requires --host-key-document. (s390x-snippets only)
>> --page-size=PAGE_SIZE
>> Specify the page size (translation granule) (4k, 16k or
>> 64k, default is 64k, arm64 only)
>> @@ -127,6 +131,9 @@ while [[ "$1" = -* ]]; do
>> --host-key-document)
>> host_key_document="$arg"
>> ;;
>> + --gen-se-header)
>> + gen_se_header="$arg"
>> + ;;
>> --page-size)
>> page_size="$arg"
>> ;;
>> @@ -341,6 +348,7 @@ U32_LONG_FMT=$u32_long
>> WA_DIVIDE=$wa_divide
>> GENPROTIMG=${GENPROTIMG-genprotimg}
>> HOST_KEY_DOCUMENT=$host_key_document
>> +GEN_SE_HEADER=$gen_se_header
>> EOF
>> if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
>> echo "TARGET=$target" >> config.mak
>> diff --git a/lib/s390x/snippet.h b/lib/s390x/snippet.h
>> index 8e4765f8..6b77a8a9 100644
>> --- a/lib/s390x/snippet.h
>> +++ b/lib/s390x/snippet.h
>> @@ -14,10 +14,17 @@
>> _binary_s390x_snippets_##type##_##file##_gbin_start
>> #define SNIPPET_NAME_END(type, file) \
>> _binary_s390x_snippets_##type##_##file##_gbin_end
>> +#define SNIPPET_HDR_START(type, file) \
>> + _binary_s390x_snippets_##type##_##file##_hdr_start
>> +#define SNIPPET_HDR_END(type, file) \
>> + _binary_s390x_snippets_##type##_##file##_hdr_end
>> +
>>
>> /* Returns the length of the snippet */
>> #define SNIPPET_LEN(type, file) \
>> ((uintptr_t)SNIPPET_NAME_END(type, file) - (uintptr_t)SNIPPET_NAME_START(type, file))
>> +#define SNIPPET_HDR_LEN(type, file) \
>> + ((uintptr_t)SNIPPET_HDR_END(type, file) - (uintptr_t)SNIPPET_HDR_START(type, file))
>>
>> /*
>> * C snippet instructions start at 0x4000 due to the prefix and the
>> diff --git a/s390x/Makefile b/s390x/Makefile
>> index f95f2e61..55e6d962 100644
>> --- a/s390x/Makefile
>> +++ b/s390x/Makefile
>> @@ -26,12 +26,20 @@ tests += $(TEST_DIR)/edat.elf
>> tests += $(TEST_DIR)/mvpg-sie.elf
>> tests += $(TEST_DIR)/spec_ex-sie.elf
>>
>> +ifneq ($(HOST_KEY_DOCUMENT),)
>> +ifneq ($(GEN_SE_HEADER),)
>> +tests += $(pv-tests)
>> +endif
>> +endif
>> +
>> tests_binary = $(patsubst %.elf,%.bin,$(tests))
>> ifneq ($(HOST_KEY_DOCUMENT),)
>> tests_pv_binary = $(patsubst %.bin,%.pv.bin,$(tests_binary))
>> else
>> tests_pv_binary =
>> +GEN_SE_HEADER =
>> endif
>> +snippets-obj = $(patsubst %.gbin,%.gobj,$(snippets))
>>
>> all: directories test_cases test_cases_binary test_cases_pv
>>
>> @@ -82,26 +90,59 @@ asmlib = $(TEST_DIR)/cstart64.o $(TEST_DIR)/cpu.o
>> FLATLIBS = $(libcflat)
>>
>> SNIPPET_DIR = $(TEST_DIR)/snippets
>> -snippet_asmlib = $(SNIPPET_DIR)/c/cstart.o lib/auxinfo.o
>> +snippet_asmlib = $(SNIPPET_DIR)/c/cstart.o
>> +snippet_lib = $(snippet_asmlib) lib/auxinfo.o
>>
>> # perquisites (=guests) for the snippet hosts.
>> # $(TEST_DIR)/<snippet-host>.elf: snippets = $(SNIPPET_DIR)/<c/asm>/<snippet>.gbin
>> $(TEST_DIR)/mvpg-sie.elf: snippets = $(SNIPPET_DIR)/c/mvpg-snippet.gbin
>> $(TEST_DIR)/spec_ex-sie.elf: snippets = $(SNIPPET_DIR)/c/spec_ex.gbin
>>
>> -$(SNIPPET_DIR)/asm/%.gbin: $(SNIPPET_DIR)/asm/%.o $(FLATLIBS)
>> - $(OBJCOPY) -O binary $(patsubst %.gbin,%.o,$@) $@
>> - $(OBJCOPY) -I binary -O elf64-s390 -B "s390:64-bit" $@ $@
>> +ifneq ($(GEN_SE_HEADER),)
>> +snippets += $(pv-snippets)
>> +tests += $(pv-tests)
>> +snippet-hdr-obj = $(patsubst %.gbin,%.hdr.obj,$(pv-snippets))
>> +else
>> +snippet-hdr-obj =
>> +endif
>> +
>> +# the asm/c snippets %.o have additional generated files as dependencies
>> +$(SNIPPET_DIR)/asm/%.o: $(SNIPPET_DIR)/asm/%.S $(asm-offsets)
>> + $(CC) $(CFLAGS) -c -nostdlib -o $@ $<
>> +
>> +$(SNIPPET_DIR)/c/%.o: $(SNIPPET_DIR)/c/%.c $(asm-offsets)
>> + $(CC) $(CFLAGS) -c -nostdlib -o $@ $<
>> +
>> +$(SNIPPET_DIR)/asm/%.gbin: $(SNIPPET_DIR)/asm/%.o
>> + $(OBJCOPY) -O binary -j ".rodata" -j ".text" -j ".data" -j ".bss" --set-section-flags .bss=alloc,load,contents $(patsubst %.gbin,%.o,$@) $@
>> + truncate -s '%4096' $@
>> +
>> +$(SNIPPET_DIR)/c/%.gbin: $(SNIPPET_DIR)/c/%.o $(snippet_lib) $(FLATLIBS)
>> + $(CC) $(LDFLAGS) -o $@ -T $(SRCDIR)/s390x/snippets/c/flat.lds $(patsubst %.gbin,%.o,$@) $(snippet_lib) $(FLATLIBS)
>> + $(OBJCOPY) -O binary -j ".rodata" -j ".lowcore" -j ".text" -j ".data" -j ".bss" --set-section-flags .bss=alloc,load,contents $@ $@
>> + truncate -s '%4096' $@
>> +
>> +$(SNIPPET_DIR)/asm/%.hdr: $(SNIPPET_DIR)/asm/%.gbin $(HOST_KEY_DOCUMENT)
>> + $(GEN_SE_HEADER) -k $(HOST_KEY_DOCUMENT) -c $<,0x4000,0x00000000000000420000000000000000 --psw-addr 0x4000 -o $@
>> +
>> +$(SNIPPET_DIR)/c/%.hdr: $(SNIPPET_DIR)/c/%.gbin $(HOST_KEY_DOCUMENT)
>> + $(GEN_SE_HEADER) -k $(HOST_KEY_DOCUMENT) -c $<,0x0,0x00000000000000420000000000000000 --psw-addr 0x4000 -o $@
>
> are they supposed to have different addresses?
> the C files start at 0x4000, while the asm ones at 0
That's a mistake I'll need to fix.
>
>> +
>> +.SECONDARY:
>> +%.gobj: %.gbin
>> + $(OBJCOPY) -I binary -O elf64-s390 -B "s390:64-bit" $< $@
>> +
>> +.SECONDARY:
>> +%.hdr.obj: %.hdr
>> + $(OBJCOPY) -I binary -O elf64-s390 -B "s390:64-bit" $< $@
>>
>> -$(SNIPPET_DIR)/c/%.gbin: $(SNIPPET_DIR)/c/%.o $(snippet_asmlib) $(FLATLIBS)
>> - $(CC) $(LDFLAGS) -o $@ -T $(SRCDIR)/s390x/snippets/c/flat.lds $(patsubst %.gbin,%.o,$@) $(snippet_asmlib) $(FLATLIBS)
>> - $(OBJCOPY) -O binary $@ $@
>> - $(OBJCOPY) -I binary -O elf64-s390 -B "s390:64-bit" $@ $@
>>
>> .SECONDEXPANSION:
>> -%.elf: $$(snippets) %.o $(FLATLIBS) $(SRCDIR)/s390x/flat.lds $(asmlib)
>> +%.elf: $(FLATLIBS) $(asmlib) $(SRCDIR)/s390x/flat.lds $$(snippets-obj) $$(snippet-hdr-obj) %.o
>> $(CC) $(CFLAGS) -c -o $(@:.elf=.aux.o) $(SRCDIR)/lib/auxinfo.c -DPROGNAME=\"$@\"
>> - $(CC) $(LDFLAGS) -o $@ -T $(SRCDIR)/s390x/flat.lds $(filter %.o, $^) $(FLATLIBS) $(snippets) $(@:.elf=.aux.o)
>> + @$(CC) $(LDFLAGS) -o $@ -T $(SRCDIR)/s390x/flat.lds \
>> + $(filter %.o, $^) $(FLATLIBS) $(snippets-obj) $(snippet-hdr-obj) $(@:.elf=.aux.o) || \
>> + { echo "Failure probably caused by missing definition of gen-se-header executable"; exit 1; }
>> $(RM) $(@:.elf=.aux.o)
>> @chmod a-x $@
>>
>> @@ -114,8 +155,12 @@ $(SNIPPET_DIR)/c/%.gbin: $(SNIPPET_DIR)/c/%.o $(snippet_asmlib) $(FLATLIBS)
>> %.pv.bin: %.bin $(HOST_KEY_DOCUMENT)
>> $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --no-verify --image $< -o $@
>>
>> +$(snippet_asmlib): $$(patsubst %.o,%.S,$$@) $(asm-offsets)
>> + $(CC) $(CFLAGS) -c -nostdlib -o $@ $<
>> +
>> +
>> arch_clean: asm_offsets_clean
>> - $(RM) $(TEST_DIR)/*.{o,elf,bin} $(TEST_DIR)/.*.d $(SNIPPET_DIR)/c/*.{o,gbin} $(SNIPPET_DIR)/c/.*.d lib/s390x/.*.d
>> + $(RM) $(TEST_DIR)/*.{o,elf,bin} $(SNIPPET_DIR)/*/*.{o,elf,*bin,*obj,hdr} $(SNIPPET_DIR)/asm/.*.d $(TEST_DIR)/.*.d lib/s390x/.*.d
>>
>> generated-files = $(asm-offsets)
>> $(tests:.elf=.o) $(asmlib) $(cflatobjs): $(generated-files)
>
next prev parent reply other threads:[~2021-11-26 13:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-23 10:39 [kvm-unit-tests PATCH 0/8] s390x: sie: Add PV snippet support Janosch Frank
2021-11-23 10:39 ` [kvm-unit-tests PATCH 1/8] lib: s390x: sie: Add sca allocation and freeing Janosch Frank
2021-11-23 10:51 ` Claudio Imbrenda
2021-11-23 10:39 ` [kvm-unit-tests PATCH 2/8] s390x: sie: Add PV fields to SIE control block Janosch Frank
2021-11-23 10:52 ` Claudio Imbrenda
2021-11-23 10:39 ` [kvm-unit-tests PATCH 3/8] s390x: sie: Add UV information into VM struct Janosch Frank
2021-11-23 10:54 ` Claudio Imbrenda
2021-11-23 12:49 ` Janosch Frank
2021-11-23 10:39 ` [kvm-unit-tests PATCH 4/8] s390x: uv: Add more UV call functions Janosch Frank
2021-11-23 10:56 ` Claudio Imbrenda
2021-11-23 10:39 ` [kvm-unit-tests PATCH 5/8] s390x: lib: Extend UV library with PV guest management Janosch Frank
2021-11-23 11:13 ` Claudio Imbrenda
2021-11-23 10:39 ` [kvm-unit-tests PATCH 6/8] lib: s390: sie: Add PV guest register handling Janosch Frank
2021-11-23 11:14 ` Claudio Imbrenda
2021-11-23 10:39 ` [kvm-unit-tests PATCH 7/8] s390x: snippets: Add PV support Janosch Frank
2021-11-23 11:22 ` Claudio Imbrenda
2021-11-26 13:28 ` Janosch Frank [this message]
2021-12-03 9:29 ` Janosch Frank
2022-01-13 13:10 ` Janosch Frank
2022-01-13 13:17 ` Claudio Imbrenda
2021-11-23 10:39 ` [kvm-unit-tests PATCH 8/8] s390x: sie: Add PV diag test Janosch Frank
2021-11-23 11:41 ` Claudio Imbrenda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=08052bad-b494-c99b-27b3-bcfef0aa94fd@linux.ibm.com \
--to=frankja@linux.ibm.com \
--cc=david@redhat.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mhartmay@linux.ibm.com \
--cc=seiden@linux.ibm.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox