From: "Kiryl Shutsemau (Meta)" <kas@kernel.org>
To: akpm@linux-foundation.org, rppt@kernel.org, peterx@redhat.com,
david@kernel.org
Cc: ljs@kernel.org, surenb@google.com, vbabka@kernel.org,
Liam.Howlett@oracle.com, ziy@nvidia.com, corbet@lwn.net,
skhan@linuxfoundation.org, seanjc@google.com,
pbonzini@redhat.com, jthoughton@google.com, aarcange@redhat.com,
sj@kernel.org, usama.arif@linux.dev, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kselftest@vger.kernel.org, kvm@vger.kernel.org,
kernel-team@meta.com, "Kiryl Shutsemau (Meta)" <kas@kernel.org>
Subject: [PATCH v2 14/14] Documentation/userfaultfd: document RWP working set tracking
Date: Fri, 8 May 2026 16:55:26 +0100 [thread overview]
Message-ID: <0b6f87fd4809245f9eebee73f34e2fb14230330c.1778254670.git.kas@kernel.org> (raw)
In-Reply-To: <cover.1778254670.git.kas@kernel.org>
Add an admin-guide section covering UFFDIO_REGISTER_MODE_RWP:
- sync and async fault models;
- UFFDIO_RWPROTECT semantics;
- UFFD_FEATURE_RWP_ASYNC;
- UFFDIO_SET_MODE runtime mode flips.
It also covers typical VMM working-set-tracking workflow from detection
loop through sync-mode eviction and back to async.
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Assisted-by: Claude:claude-opus-4-6
---
Documentation/admin-guide/mm/userfaultfd.rst | 226 ++++++++++++++++++-
1 file changed, 220 insertions(+), 6 deletions(-)
diff --git a/Documentation/admin-guide/mm/userfaultfd.rst b/Documentation/admin-guide/mm/userfaultfd.rst
index 1e533639fd50..5ac4ae3dff1b 100644
--- a/Documentation/admin-guide/mm/userfaultfd.rst
+++ b/Documentation/admin-guide/mm/userfaultfd.rst
@@ -275,16 +275,16 @@ tracking and it can be different in a few ways:
- Dirty information will not get lost if the pte was zapped due to
various reasons (e.g. during split of a shmem transparent huge page).
- - Due to a reverted meaning of soft-dirty (page clean when uffd-wp bit
- set; dirty when uffd-wp bit cleared), it has different semantics on
- some of the memory operations. For example: ``MADV_DONTNEED`` on
+ - Due to a reverted meaning of soft-dirty (page clean when the uffd bit
+ is set; dirty when the uffd bit is cleared), it has different semantics
+ on some of the memory operations. For example: ``MADV_DONTNEED`` on
anonymous (or ``MADV_REMOVE`` on a file mapping) will be treated as
- dirtying of memory by dropping uffd-wp bit during the procedure.
+ dirtying of memory by dropping the uffd bit during the procedure.
The user app can collect the "written/dirty" status by looking up the
-uffd-wp bit for the pages being interested in /proc/pagemap.
+uffd bit for the pages being interested in /proc/pagemap.
-The page will not be under track of uffd-wp async mode until the page is
+The page will not be under track of userfaultfd-wp async mode until the page is
explicitly write-protected by ``ioctl(UFFDIO_WRITEPROTECT)`` with the mode
flag ``UFFDIO_WRITEPROTECT_MODE_WP`` set. Trying to resolve a page fault
that was tracked by async mode userfaultfd-wp is invalid.
@@ -307,6 +307,220 @@ transparent to the guest, we want that same address range to act as if it was
still poisoned, even though it's on a new physical host which ostensibly
doesn't have a memory error in the exact same spot.
+Read-Write Protection
+---------------------
+
+``UFFDIO_REGISTER_MODE_RWP`` enables read-write protection tracking on a
+memory range. It is similar to (but faster than) ``mprotect(PROT_NONE)``
+combined with a signal handler; unlike ``mprotect(PROT_NONE)``, RWP only
+traps accesses to *present* PTEs, so accesses to unpopulated addresses in a
+protected range fall through to the normal missing-page path. It uses the
+PROT_NONE hinting mechanism (same as NUMA balancing) to make pages
+inaccessible while keeping them resident in memory. Works on anonymous,
+shmem, and hugetlbfs memory.
+
+This is designed for VM memory managers that need to track the working set
+of guest memory for cold page eviction to tiered or remote storage.
+
+**Setup:**
+
+1. Open a userfaultfd and enable ``UFFD_FEATURE_RWP`` via ``UFFDIO_API``.
+ Optionally request ``UFFD_FEATURE_RWP_ASYNC`` as well — it requires
+ ``UFFD_FEATURE_RWP`` to be set in the same ``UFFDIO_API`` call.
+
+2. Register the guest memory range with ``UFFDIO_REGISTER_MODE_RWP``
+ (and ``UFFDIO_REGISTER_MODE_MISSING`` if evicted pages will need to be
+ fetched back from storage).
+
+**Feature availability:**
+
+RWP is built on top of two kernel primitives: a spare PTE bit owned by
+userfaultfd (``CONFIG_HAVE_ARCH_USERFAULTFD_WP``) and arch support for
+present-but-inaccessible PTEs (``CONFIG_ARCH_HAS_PTE_PROTNONE``). When both
+are available on a 64-bit kernel, the build selects
+``CONFIG_USERFAULTFD_RWP=y`` and the ``VM_UFFD_RWP`` VMA flag becomes
+available.
+
+``UFFD_FEATURE_RWP`` and ``UFFD_FEATURE_RWP_ASYNC`` are masked out of the
+features returned by ``UFFDIO_API`` when the running kernel or architecture
+cannot support them — for example 32-bit kernels (where ``VM_UFFD_RWP`` is
+unavailable), kernels built without ``CONFIG_USERFAULTFD_RWP``, and
+architectures whose ptes cannot carry the uffd bit at runtime (e.g. riscv
+without the ``SVRSW60T59B`` extension). ``UFFDIO_API`` does not fail;
+unsupported bits are simply absent from ``uffdio_api.features`` on return.
+VMMs should inspect the returned ``features`` after ``UFFDIO_API`` and fall
+back to another tracking method when RWP is unavailable.
+
+**Protecting and Unprotecting:**
+
+Use ``UFFDIO_RWPROTECT`` to protect or unprotect a range, mirroring the
+``UFFDIO_WRITEPROTECT`` interface::
+
+ struct uffdio_rwprotect rwp = {
+ .range = { .start = addr, .len = len },
+ .mode = UFFDIO_RWPROTECT_MODE_RWP, /* protect */
+ };
+ ioctl(uffd, UFFDIO_RWPROTECT, &rwp);
+
+Setting ``UFFDIO_RWPROTECT_MODE_RWP`` sets PROT_NONE on present PTEs in the
+range. Pages stay resident and their physical frames are preserved — only
+access permissions are removed.
+
+Clearing ``UFFDIO_RWPROTECT_MODE_RWP`` restores normal VMA permissions and
+wakes any faulting threads (unless ``UFFDIO_RWPROTECT_MODE_DONTWAKE`` is set).
+
+**Scope of protection:**
+
+RWP protection is a property of *present* PTEs. ``UFFDIO_RWPROTECT`` only
+affects entries that are already populated. Unpopulated addresses within
+the range remain unpopulated; when first accessed they fault through the
+normal missing path (``do_anonymous_page()``, ``do_swap_page()``,
+``finish_fault()``) and the resulting PTE is not RWP-protected. To observe
+the population itself, co-register the range with
+``UFFDIO_REGISTER_MODE_MISSING``.
+
+Protection is preserved across page reclaim: a page swapped out while
+RWP-protected carries the marker on its swap entry, and swap-in restores
+the PROT_NONE state so the first access after swap-in still faults. The
+same applies to pages temporarily replaced by migration entries.
+
+Operations that drop the PTE entirely — ``MADV_DONTNEED`` on anonymous
+memory, hole-punch on shmem, truncation of a file mapping — also drop the
+RWP marker: the next access re-populates the range without protection.
+Unlike WP (which persists via ``PTE_MARKER_UFFD_WP``), there is no
+persistent RWP marker today. The VMM needs to re-arm the range with
+``UFFDIO_RWPROTECT`` after any operation that explicitly frees PTEs.
+
+**Fault Handling:**
+
+When a protected page is accessed:
+
+- **Sync mode** (default): The faulting thread blocks and a
+ ``UFFD_PAGEFAULT_FLAG_RWP`` message is delivered to the userfaultfd
+ handler. The handler resolves the fault with ``UFFDIO_RWPROTECT``
+ (clearing ``MODE_RWP``), which restores the PTE permissions and wakes
+ the faulting thread.
+
+- **Async mode** (``UFFD_FEATURE_RWP_ASYNC``): The kernel automatically
+ restores PTE permissions and the thread continues without blocking. No
+ message is delivered to the handler.
+
+**Runtime Mode Switching:**
+
+``UFFDIO_SET_MODE`` toggles ``UFFD_FEATURE_RWP_ASYNC`` at runtime, allowing
+the VMM to switch between lightweight async detection and safe sync
+eviction without re-registering. The toggle takes ``mmap_write_lock()`` to
+ensure all in-flight faults complete before the mode change takes effect.
+
+**Cold Page Detection with PAGEMAP_SCAN:**
+
+RWP-protected PTEs carry the uffd PTE bit; the fault-resolution path
+clears it. ``PAGEMAP_SCAN`` reports ``PAGE_IS_ACCESSED`` once the bit is
+clear on a ``VM_UFFD_RWP`` VMA, so inverting it efficiently reports the
+still-protected (cold) pages::
+
+ struct pm_scan_arg arg = {
+ .size = sizeof(arg),
+ .start = guest_mem_start,
+ .end = guest_mem_end,
+ .vec = (uint64_t)regions,
+ .vec_len = regions_len,
+ .category_mask = PAGE_IS_ACCESSED,
+ .category_inverted = PAGE_IS_ACCESSED,
+ .return_mask = PAGE_IS_ACCESSED,
+ };
+ long n = ioctl(pagemap_fd, PAGEMAP_SCAN, &arg);
+
+The returned ``page_region`` array contains contiguous cold ranges that can
+then be evicted.
+
+**Cleanup:**
+
+When the userfaultfd is closed or the range is unregistered, all PROT_NONE
+PTEs are automatically restored to their normal VMA permissions. This
+prevents pages from becoming permanently inaccessible.
+
+**VMM Working Set Tracking Workflow:**
+
+A typical VMM lifecycle for cold page eviction to tiered storage. Two
+mappings of the same shmem (or hugetlbfs) file are used: ``guest_mem`` is
+the RWP-registered mapping that vCPUs access through, and ``io_mem`` is a
+private mapping for VMM-side I/O. Reading ``io_mem`` does not go through
+the RWP-protected PTEs of ``guest_mem``, so the VMM's own ``pwrite()``
+never traps on its own ::
+
+ /* One-time setup */
+ fd = memfd_create("guest", MFD_CLOEXEC);
+ ftruncate(fd, guest_size);
+ guest_mem = mmap(NULL, guest_size, PROT_READ | PROT_WRITE,
+ MAP_SHARED, fd, 0); /* vCPU view, RWP-registered */
+ io_mem = mmap(NULL, guest_size, PROT_READ | PROT_WRITE,
+ MAP_SHARED, fd, 0); /* VMM I/O view, unprotected */
+
+ uffd = userfaultfd(O_CLOEXEC | O_NONBLOCK);
+ ioctl(uffd, UFFDIO_API, &(struct uffdio_api){
+ .api = UFFD_API,
+ .features = UFFD_FEATURE_RWP | UFFD_FEATURE_RWP_ASYNC,
+ });
+ ioctl(uffd, UFFDIO_REGISTER, &(struct uffdio_register){
+ .range = { guest_mem, guest_size },
+ .mode = UFFDIO_REGISTER_MODE_RWP |
+ UFFDIO_REGISTER_MODE_MISSING,
+ });
+
+ /* Tracking loop */
+ while (vm_running) {
+ /* 1. Detection phase (async — no vCPU stalls) */
+ ioctl(uffd, UFFDIO_RWPROTECT, &(struct uffdio_rwprotect){
+ .range = full_range,
+ .mode = UFFDIO_RWPROTECT_MODE_RWP });
+ sleep(tracking_interval);
+
+ /* 2. Find cold pages (uffd bit still set) */
+ ioctl(pagemap_fd, PAGEMAP_SCAN, &(struct pm_scan_arg){
+ .category_mask = PAGE_IS_ACCESSED,
+ .category_inverted = PAGE_IS_ACCESSED,
+ .return_mask = PAGE_IS_ACCESSED,
+ ...
+ });
+
+ /* 3. Switch to sync for safe eviction */
+ ioctl(uffd, UFFDIO_SET_MODE,
+ &(struct uffdio_set_mode){
+ .disable = UFFD_FEATURE_RWP_ASYNC });
+
+ /* 4. Evict cold pages (vCPU faults block on guest_mem) */
+ for each cold range:
+ /* Read from io_mem -- bypasses RWP, no fault. */
+ pwrite(storage_fd, io_mem + cold_offset, len, offset);
+ /* Drop the page from the shared file. */
+ fallocate(fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
+ cold_offset, len);
+ /*
+ * Wake any vCPU blocked on the RWP fault for this range:
+ * fallocate() does not iterate ctx->fault_pending_wqh.
+ */
+ ioctl(uffd, UFFDIO_WAKE, &(struct uffdio_range){
+ .start = (uintptr_t)guest_mem + cold_offset,
+ .len = len });
+
+ /* 5. Resume async tracking */
+ ioctl(uffd, UFFDIO_SET_MODE,
+ &(struct uffdio_set_mode){
+ .enable = UFFD_FEATURE_RWP_ASYNC });
+ }
+
+During step 4, a vCPU that accesses ``guest_mem + cold_offset`` blocks
+with a ``UFFD_PAGEFAULT_FLAG_RWP`` fault while the eviction is in
+progress. After ``fallocate()`` punches the page out and ``UFFDIO_WAKE``
+fires, the vCPU retries the access, faults as ``MISSING``, and the
+handler resolves it with ``UFFDIO_COPY`` from storage.
+
+This workflow targets shmem and hugetlbfs (both support a private
+``io_mem`` mapping over the same fd). Anonymous-memory backings need a
+different inner-loop strategy because the VMM has no way to read the
+page without going through the RWP-protected mapping.
+
QEMU/KVM
========
--
2.51.2
next prev parent reply other threads:[~2026-05-08 15:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 15:55 [PATCH v2 00/14] userfaultfd: working set tracking for VM guest memory Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 01/14] mm: decouple protnone helpers from CONFIG_NUMA_BALANCING Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 02/14] mm: rename uffd-wp PTE bit macros to uffd Kiryl Shutsemau (Meta)
2026-05-08 23:52 ` SeongJae Park
2026-05-08 15:55 ` [PATCH v2 03/14] mm: rename uffd-wp PTE accessors " Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 04/14] mm: add VM_UFFD_RWP VMA flag Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 05/14] mm: add MM_CP_UFFD_RWP change_protection() flag Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 06/14] mm: preserve RWP marker across PTE rewrites Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 07/14] mm: handle VM_UFFD_RWP in khugepaged, rmap, and GUP Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 08/14] userfaultfd: add UFFDIO_REGISTER_MODE_RWP and UFFDIO_RWPROTECT plumbing Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 09/14] mm/userfaultfd: add RWP fault delivery and expose UFFDIO_REGISTER_MODE_RWP Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 10/14] mm/pagemap: add PAGE_IS_ACCESSED for RWP tracking Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 11/14] userfaultfd: add UFFD_FEATURE_RWP_ASYNC for async fault resolution Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 12/14] userfaultfd: add UFFDIO_SET_MODE for runtime sync/async toggle Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` [PATCH v2 13/14] selftests/mm: add userfaultfd RWP tests Kiryl Shutsemau (Meta)
2026-05-08 15:55 ` Kiryl Shutsemau (Meta) [this message]
2026-05-08 17:32 ` [PATCH v2 00/14] userfaultfd: working set tracking for VM guest memory Andrew Morton
2026-05-08 22:48 ` Kiryl Shutsemau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0b6f87fd4809245f9eebee73f34e2fb14230330c.1778254670.git.kas@kernel.org \
--to=kas@kernel.org \
--cc=Liam.Howlett@oracle.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=corbet@lwn.net \
--cc=david@kernel.org \
--cc=jthoughton@google.com \
--cc=kernel-team@meta.com \
--cc=kvm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=rppt@kernel.org \
--cc=seanjc@google.com \
--cc=sj@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=surenb@google.com \
--cc=usama.arif@linux.dev \
--cc=vbabka@kernel.org \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox