From: Nitin A Kamble <nitin.a.kamble-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Cc: kvm-devel <kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: Re: [Patch] (big) real mode emulation - jmp rel
Date: Thu, 16 Aug 2007 16:54:22 -0700 [thread overview]
Message-ID: <1187308462.10269.12.camel@lnitindesktop.sc.intel.com> (raw)
In-Reply-To: <1187296469.5500.7.camel-mpPvwfgnXtFHIUuj5cj4Omt3HXsI98Cx0E9HWUfgJXw@public.gmane.org>
[-- Attachment #1.1.1: Type: text/plain, Size: 574 bytes --]
Hi Avi,
If you are fine with macro then attached are the updated patches for
"jmp rel" & "jmp rel short" instruction emulation.
On Thu, 2007-08-16 at 13:34 -0700, Nitin A Kamble wrote:
> Avi,
> In my opinion converting this small function to file-scope function,
> would make code look ugly. I think the earlier Macro definition was
> better.
--
Thanks & Regards,
Nitin
Open Source Technology Center, Intel Corporation
-----------------------------------------------------------------
The mind is like a parachute; it works much better when it's open
[-- Attachment #1.1.2: jmprel_2.patch --]
[-- Type: text/x-patch, Size: 1540 bytes --]
commit 38177680ad53b330d0f8b4fcec20953a7a7dfa2d
Author: Nitin A Kamble <nitin.a.kamble@intel.com>
Date: Thu Aug 16 19:10:14 2007 -0700
Implement instruction "jmp rel" opcode 0xe9
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
diff --git a/drivers/kvm/x86_emulate.c b/drivers/kvm/x86_emulate.c
index b4f439c..6519cf9 100644
--- a/drivers/kvm/x86_emulate.c
+++ b/drivers/kvm/x86_emulate.c
@@ -145,8 +145,10 @@ static u8 opcode_table[256] = {
0, 0, 0, 0,
/* 0xD8 - 0xDF */
0, 0, 0, 0, 0, 0, 0, 0,
- /* 0xE0 - 0xEF */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xE0 - 0xE7 */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xE8 - 0xEF */
+ 0, SrcImm|ImplicitOps, 0, 0, 0, 0, 0, 0,
/* 0xF0 - 0xF7 */
0, 0, 0, 0,
ImplicitOps, 0,
@@ -447,6 +449,12 @@ struct operand {
(((reg) + _inc) & ((1UL << (ad_bytes << 3)) - 1)); \
} while (0)
+#define jmp_rel(rel) \
+ do { \
+ _eip += (int)(rel); \
+ _eip = ((op_bytes == 2) ? (uint16_t)_eip : (uint32_t)_eip); \
+ } while (0)
+
/*
* Given the 'reg' portion of a ModRM byte, and a register block, return a
* pointer into the block that addresses the relevant register.
@@ -1200,6 +1208,10 @@ special_insn:
case 0xae ... 0xaf: /* scas */
DPRINTF("Urk! I don't handle SCAS.\n");
goto cannot_emulate;
+ case 0xe9: /* jmp rel */
+ jmp_rel(src.val);
+ no_wb = 1; /* Disable writeback. */
+ break;
case 0xf4: /* hlt */
ctxt->vcpu->halt_request = 1;
goto done;
[-- Attachment #1.1.3: jmp_rel_short.patch --]
[-- Type: text/x-patch, Size: 971 bytes --]
commit 38f7db6830c862cd0470aaa07cabe616ff741d69
Author: Nitin A Kamble <nitin.a.kamble@intel.com>
Date: Fri Aug 10 18:48:05 2007 -0700
Implement "jmp rel short" opcode: 0xeb
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
diff --git a/drivers/kvm/x86_emulate.c b/drivers/kvm/x86_emulate.c
index 40fb6ee..16ea385 100644
--- a/drivers/kvm/x86_emulate.c
+++ b/drivers/kvm/x86_emulate.c
@@ -148,7 +148,7 @@ static u8 opcode_table[256] = {
/* 0xE0 - 0xE7 */
0, 0, 0, 0, 0, 0, 0, 0,
/* 0xE8 - 0xEF */
- 0, SrcImm|ImplicitOps, 0, 0, 0, 0, 0, 0,
+ 0, SrcImm|ImplicitOps, 0, SrcImmByte|ImplicitOps, 0, 0, 0, 0,
/* 0xF0 - 0xF7 */
0, 0, 0, 0,
ImplicitOps, 0,
@@ -1208,6 +1208,7 @@ special_insn:
case 0xae ... 0xaf: /* scas */
DPRINTF("Urk! I don't handle SCAS.\n");
goto cannot_emulate;
+ case 0xeb: /* jmp rel short */
case 0xe9: /* jmp rel */
jmp_rel(src.val);
no_wb = 1; /* Disable writeback. */
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
[-- Attachment #2: Type: text/plain, Size: 315 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
[-- Attachment #3: Type: text/plain, Size: 186 bytes --]
_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel
next prev parent reply other threads:[~2007-08-16 23:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-10 22:32 [Patch] (big) real mode emulation - jmp rel Nitin A Kamble
[not found] ` <1186785157.6097.19.camel-mpPvwfgnXtFHIUuj5cj4Omt3HXsI98Cx0E9HWUfgJXw@public.gmane.org>
2007-08-13 8:49 ` Avi Kivity
[not found] ` <46C01B0E.7080304-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-08-16 1:15 ` Nitin A Kamble
[not found] ` <1187226935.24576.5.camel-mpPvwfgnXtFHIUuj5cj4Omt3HXsI98Cx0E9HWUfgJXw@public.gmane.org>
2007-08-16 10:25 ` Avi Kivity
[not found] ` <46C42610.8020707-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-08-16 20:34 ` Nitin A Kamble
[not found] ` <1187296469.5500.7.camel-mpPvwfgnXtFHIUuj5cj4Omt3HXsI98Cx0E9HWUfgJXw@public.gmane.org>
2007-08-16 23:54 ` Nitin A Kamble [this message]
2007-08-17 12:24 ` Avi Kivity
[not found] ` <46C59385.6060108-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-08-17 22:24 ` Nitin A Kamble
[not found] ` <1187389499.9011.14.camel-mpPvwfgnXtFHIUuj5cj4Omt3HXsI98Cx0E9HWUfgJXw@public.gmane.org>
2007-08-19 8:03 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1187308462.10269.12.camel@lnitindesktop.sc.intel.com \
--to=nitin.a.kamble-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org \
--cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox