From: Jerone Young <jyoung5-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
To: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: Jerone Young <jyoung5-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
Subject: Move x86 pic strutctures
Date: Mon, 19 Nov 2007 17:06:32 -0600 [thread overview]
Message-ID: <11955135981998-git-send-email-jyoung5@us.ibm.com> (raw)
In-Reply-To: <11955135972254-git-send-email-jyoung5-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
This patch moves structures:
kvm_pic_state
kvm_ioapic_state
to inclue/asm-x86/kvm.h.
Signed-off-by: Jerone Young <jyoung5-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
diff --git a/include/asm-x86/kvm.h b/include/asm-x86/kvm.h
index ad75f63..7a8f4d5 100644
--- a/include/asm-x86/kvm.h
+++ b/include/asm-x86/kvm.h
@@ -14,4 +14,53 @@ struct kvm_memory_alias {
__u64 target_phys_addr;
};
+/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
+struct kvm_pic_state {
+ __u8 last_irr; /* edge detection */
+ __u8 irr; /* interrupt request register */
+ __u8 imr; /* interrupt mask register */
+ __u8 isr; /* interrupt service register */
+ __u8 priority_add; /* highest irq priority */
+ __u8 irq_base;
+ __u8 read_reg_select;
+ __u8 poll;
+ __u8 special_mask;
+ __u8 init_state;
+ __u8 auto_eoi;
+ __u8 rotate_on_auto_eoi;
+ __u8 special_fully_nested_mode;
+ __u8 init4; /* true if 4 byte init */
+ __u8 elcr; /* PIIX edge/trigger selection */
+ __u8 elcr_mask;
+};
+
+#define KVM_IOAPIC_NUM_PINS 24
+struct kvm_ioapic_state {
+ __u64 base_address;
+ __u32 ioregsel;
+ __u32 id;
+ __u32 irr;
+ __u32 pad;
+ union {
+ __u64 bits;
+ struct {
+ __u8 vector;
+ __u8 delivery_mode:3;
+ __u8 dest_mode:1;
+ __u8 delivery_status:1;
+ __u8 polarity:1;
+ __u8 remote_irr:1;
+ __u8 trig_mode:1;
+ __u8 mask:1;
+ __u8 reserve:7;
+ __u8 reserved[4];
+ __u8 dest_id;
+ } fields;
+ } redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER 0
+#define KVM_IRQCHIP_PIC_SLAVE 1
+#define KVM_IRQCHIP_IOAPIC 2
+
#endif
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index d09dd5d..1779c3d 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -48,54 +48,6 @@ struct kvm_irq_level {
__u32 level;
};
-/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
-struct kvm_pic_state {
- __u8 last_irr; /* edge detection */
- __u8 irr; /* interrupt request register */
- __u8 imr; /* interrupt mask register */
- __u8 isr; /* interrupt service register */
- __u8 priority_add; /* highest irq priority */
- __u8 irq_base;
- __u8 read_reg_select;
- __u8 poll;
- __u8 special_mask;
- __u8 init_state;
- __u8 auto_eoi;
- __u8 rotate_on_auto_eoi;
- __u8 special_fully_nested_mode;
- __u8 init4; /* true if 4 byte init */
- __u8 elcr; /* PIIX edge/trigger selection */
- __u8 elcr_mask;
-};
-
-#define KVM_IOAPIC_NUM_PINS 24
-struct kvm_ioapic_state {
- __u64 base_address;
- __u32 ioregsel;
- __u32 id;
- __u32 irr;
- __u32 pad;
- union {
- __u64 bits;
- struct {
- __u8 vector;
- __u8 delivery_mode:3;
- __u8 dest_mode:1;
- __u8 delivery_status:1;
- __u8 polarity:1;
- __u8 remote_irr:1;
- __u8 trig_mode:1;
- __u8 mask:1;
- __u8 reserve:7;
- __u8 reserved[4];
- __u8 dest_id;
- } fields;
- } redirtbl[KVM_IOAPIC_NUM_PINS];
-};
-
-#define KVM_IRQCHIP_PIC_MASTER 0
-#define KVM_IRQCHIP_PIC_SLAVE 1
-#define KVM_IRQCHIP_IOAPIC 2
struct kvm_irqchip {
__u32 chip_id;
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
next prev parent reply other threads:[~2007-11-19 23:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-19 23:06 [PATCH 0/7] Move x86 code out of include/linux/kvm.h Jerone Young
[not found] ` <11955135972254-git-send-email-jyoung5-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2007-11-19 23:06 ` Move kvm_memory_alias to include/asm-x86/kvm.h Jerone Young
2007-11-19 23:06 ` Jerone Young [this message]
2007-11-19 23:06 ` Move kvm_regs to asm-x86/kvm.h Jerone Young
2007-11-19 23:06 ` Move structure lapic_state Jerone Young
2007-11-19 23:06 ` Move kvm_sgement & kvm_dtable structure Jerone Young
2007-11-19 23:06 ` Move kvm_sregs structure & msr related stuructures Jerone Young
2007-11-19 23:06 ` Move cpuid sturctures Jerone Young
2007-11-20 8:29 ` [PATCH 0/7] Move x86 code out of include/linux/kvm.h Carsten Otte
2007-11-20 8:36 ` Zhang, Xiantao
2007-11-20 9:46 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11955135981998-git-send-email-jyoung5@us.ibm.com \
--to=jyoung5-r/jw6+rmf7hqt0dzr+alfa@public.gmane.org \
--cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox