[PATCH 2/2] [PATCH] kvmclock implementation, the guest part.

[Glauber de Oliveira Costa <gcosta@redhat.com>]

This is the guest part of kvm clock implementation
It does not do tsc-only timing, as tsc can have deltas
between cpus, and it did not seem worthy to me to keep
adjusting them.

We do use it, however, for fine-grained adjustment.

Other than that, time comes from the host.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/Kconfig           |   10 +++
 arch/x86/kernel/Makefile   |    1 
 arch/x86/kernel/kvmclock.c |  161 ++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/setup_32.c |    5 +
 arch/x86/kernel/setup_64.c |    5 +
 5 files changed, 182 insertions(+), 0 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3be2305..cc2bc37 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -372,6 +372,16 @@ config VMI
 	  at the moment), by linking the kernel to a GPL-ed ROM module
 	  provided by the hypervisor.
 
+config KVM_CLOCK
+	bool "KVM paravirtualized clock"
+	select PARAVIRT
+	help
+	  Turning on this option will allow you to run a paravirtualized clock
+	  when running over the KVM hypervisor. Instead of relying on a PIT
+	  (or probably other) emulation by the underlying device model, the host
+	  provides the guest with timing infrastructure such as time of day, and
+	  system time
+
 source "arch/x86/lguest/Kconfig"
 
 config PARAVIRT
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 76ec0f8..5b91b82 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_DEBUG_RODATA_TEST)	+= test_
 obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
 
 obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
+obj-$(CONFIG_KVM_CLOCK)		+= kvmclock.o
 obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o
 
 ifdef CONFIG_INPUT_PCSPKR
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
new file mode 100644
index 0000000..b8da3bf
--- /dev/null
+++ b/arch/x86/kernel/kvmclock.c
@@ -0,0 +1,161 @@
+/*  KVM paravirtual clock driver. A clocksource implementation
+    Copyright (C) 2008 Glauber de Oliveira Costa, Red Hat Inc.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include <linux/clocksource.h>
+#include <linux/kvm_para.h>
+#include <asm/arch_hooks.h>
+#include <asm/msr.h>
+#include <xen/interface/xen.h>
+
+#define KVM_SCALE 22
+
+static int kvmclock = 1;
+
+static int parse_no_kvmclock(char *arg)
+{
+	kvmclock = 0;
+	return 0;
+}
+early_param("no-kvmclock", parse_no_kvmclock);
+
+struct shared_info shared_info __attribute__((__aligned__(PAGE_SIZE)));
+
+/* The hypervisor will put information about time periodically here */
+static struct kvm_vcpu_time_info hv_clock[NR_CPUS];
+#define get_clock(cpu, field) hv_clock[cpu].field
+
+static inline u64 kvm_get_delta(u64 last_tsc)
+{
+	int cpu = smp_processor_id();
+	u64 delta = native_read_tsc() - last_tsc;
+	return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE;
+}
+
+static struct kvm_wall_clock wall_clock;
+static cycle_t kvm_clock_read(void);
+/*
+ * The wallclock is the time of day when we booted. Since then, some time may
+ * have elapsed since the hypervisor wrote the data. So we try to account for
+ * that with system time
+ */
+unsigned long kvm_get_wallclock(void)
+{
+	u32 wc_sec, wc_nsec;
+	u64 delta;
+	struct timespec ts;
+	int version, nsec;
+	int low, high;
+
+	low = (int)__pa(&wall_clock);
+	high = ((u64)__pa(&wall_clock) >> 32);
+
+	delta = kvm_clock_read();
+
+	native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
+	do {
+		version = wall_clock.wc_version;
+		rmb();
+		wc_sec = wall_clock.wc_sec;
+		wc_nsec = wall_clock.wc_nsec;
+		rmb();
+	} while ((wall_clock.wc_version != version) || (version & 1));
+
+	delta = kvm_clock_read() - delta;
+	delta += wc_nsec;
+	nsec = do_div(delta, NSEC_PER_SEC);
+	set_normalized_timespec(&ts, wc_sec + delta, nsec);
+	/*
+	 * Of all mechanisms of time adjustment I've tested, this one
+	 * was the champion!
+	 */
+	return ts.tv_sec + 1;
+}
+
+int kvm_set_wallclock(unsigned long now)
+{
+	return 0;
+}
+
+/*
+ * This is our read_clock function. The host puts an tsc timestamp each time
+ * it updates a new time. Without the tsc adjustment, we can have a situation
+ * in which a vcpu starts to run earlier (smaller system_time), but probes
+ * time later (compared to another vcpu), leading to backwards time
+ */
+static cycle_t kvm_clock_read(void)
+{
+	u64 last_tsc, now;
+	int cpu;
+
+	preempt_disable();
+	cpu = smp_processor_id();
+
+	last_tsc = get_clock(cpu, tsc_timestamp);
+	now = get_clock(cpu, system_time);
+
+	now += kvm_get_delta(last_tsc);
+	preempt_enable();
+
+	return now;
+}
+static struct clocksource kvm_clock = {
+	.name = "kvm-clock",
+	.read = kvm_clock_read,
+	.rating = 400,
+	.mask = CLOCKSOURCE_MASK(64),
+	.mult = 1 << KVM_SCALE,
+	.shift = KVM_SCALE,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int kvm_register_clock(void)
+{
+	int cpu = smp_processor_id();
+	int low, high;
+	low = (int)__pa(&hv_clock[cpu]);
+	high = ((u64)__pa(&hv_clock[cpu]) >> 32);
+
+	return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high);
+}
+
+static void kvm_setup_secondary_clock(void)
+{
+	/*
+	 * Now that the first cpu already had this clocksource initialized,
+	 * we shouldn't fail.
+	 */
+	WARN_ON(kvm_register_clock());
+	/* ok, done with our trickery, call native */
+	setup_secondary_APIC_clock();
+}
+
+void __init kvmclock_init(void)
+{
+	if (!kvm_para_available())
+		return;
+
+	if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
+		if (kvm_register_clock())
+			return;
+		pv_time_ops.get_wallclock = kvm_get_wallclock;
+		pv_time_ops.set_wallclock = kvm_set_wallclock;
+		pv_time_ops.sched_clock = kvm_clock_read;
+		pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
+		clocksource_register(&kvm_clock);
+	}
+}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 691ab4c..988da57 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -46,6 +46,7 @@ #include <linux/dmi.h>
 #include <linux/pfn.h>
 #include <linux/pci.h>
 #include <linux/init_ohci1394_dma.h>
+#include <linux/kvm_para.h>
 
 #include <video/edid.h>
 
@@ -772,6 +773,10 @@ #endif
 	if (mtrr_trim_uncached_memory(max_pfn))
 		max_low_pfn = setup_memory();
 
+#ifdef CONFIG_KVM_CLOCK
+	kvmclock_init();
+#endif
+
 #ifdef CONFIG_VMI
 	/*
 	 * Must be after max_low_pfn is determined, and before kernel
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index c0d8208..cdf9578 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -41,6 +41,7 @@ #include <linux/dma-mapping.h>
 #include <linux/ctype.h>
 #include <linux/uaccess.h>
 #include <linux/init_ohci1394_dma.h>
+#include <linux/kvm_para.h>
 
 #include <asm/mtrr.h>
 #include <asm/uaccess.h>
@@ -349,6 +350,10 @@ #endif
 
 	io_delay_init();
 
+#ifdef CONFIG_KVM_CLOCK
+	kvmclock_init();
+#endif
+
 #ifdef CONFIG_SMP
 	/* setup to use the early static init tables during kernel startup */
 	x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
-- 
1.4.2


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/