From: Glauber Costa <gcosta@redhat.com>
To: kvm-devel@lists.sourceforge.net
Cc: marcelo@kvack.org, avi@qumranet.com,
Glauber Costa <gcosta@redhat.com>,
chrisw@sous-sol.org
Subject: [PATCH 9/15] initialize hot add system.
Date: Fri, 22 Feb 2008 18:34:33 -0300 [thread overview]
Message-ID: <1203716079-4872-10-git-send-email-gcosta@redhat.com> (raw)
In-Reply-To: <1203716079-4872-9-git-send-email-gcosta@redhat.com>
Register the pios, and grab cpu_model for future usage.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
---
qemu/hw/acpi.c | 35 +++++++++++++++++++++++++++++++++++
qemu/hw/pc.c | 1 +
2 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/qemu/hw/acpi.c b/qemu/hw/acpi.c
index 18561e0..02f6bab 100644
--- a/qemu/hw/acpi.c
+++ b/qemu/hw/acpi.c
@@ -533,6 +533,41 @@ void qemu_system_powerdown(void)
}
}
#endif
+unsigned long gpe_base = 0xafe0;
+
+struct gpe_regs {
+ uint16_t sts; /* status */
+ uint16_t en; /* enabled */
+};
+
+static struct gpe_regs gpe;
+
+static uint32_t gpe_readb(void *opaque, uint32_t addr)
+{
+ uint32_t val = 0;
+#if defined(DEBUG)
+ printf("gpe read %lx == %lx\n", addr, val);
+#endif
+ return val;
+}
+
+static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+#if defined(DEBUG)
+ printf("gpe write %lx <== %d\n", addr, val);
+#endif
+}
+
+static char *model;
+
+void qemu_system_hot_add_init(char *cpu_model)
+{
+ register_ioport_write(gpe_base, 4, 1, gpe_writeb, &gpe);
+ register_ioport_read(gpe_base, 4, 1, gpe_readb, &gpe);
+
+ model = cpu_model;
+}
+
void qemu_system_cpu_hot_add(int cpu, int state)
{
}
diff --git a/qemu/hw/pc.c b/qemu/hw/pc.c
index 982377d..ab69e5c 100644
--- a/qemu/hw/pc.c
+++ b/qemu/hw/pc.c
@@ -1020,6 +1020,7 @@ #endif
}
}
+ qemu_system_hot_add_init(cpu_model);
#define USE_HYPERCALL
#ifdef USE_HYPERCALL
pci_hypercall_init(pci_bus);
--
1.4.2
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
next prev parent reply other threads:[~2008-02-22 21:34 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-22 21:34 [PATCH 0/15] Review: acpi processor hotplug Glauber Costa
2008-02-22 21:34 ` [PATCH 1/15] Make a GPE register block be acessible Glauber Costa
2008-02-22 21:34 ` [PATCH 2/15] mark extra cpus as present Glauber Costa
2008-02-22 21:34 ` [PATCH 3/15] introduce cpu_set to qemu monitor Glauber Costa
2008-02-22 21:34 ` [PATCH 4/15] mark processors as presents Glauber Costa
2008-02-22 21:34 ` [PATCH 5/15] provide gpe _L0x methods Glauber Costa
2008-02-22 21:34 ` [PATCH 6/15] provide operation region for pio to the gpes Glauber Costa
2008-02-22 21:34 ` [PATCH 7/15] implement method _L00 for GPE0 Glauber Costa
2008-02-22 21:34 ` [PATCH 8/15] isolate cpu initialization function in hw/pc.c Glauber Costa
2008-02-22 21:34 ` Glauber Costa [this message]
2008-02-22 21:34 ` [PATCH 10/15] handle gpe data for pio Glauber Costa
2008-02-22 21:34 ` [PATCH 11/15] manipulate the gpe bits and send sci up the os Glauber Costa
2008-02-22 21:34 ` [PATCH 12/15] isolate cpu thread creation in qemu-kvm.c Glauber Costa
2008-02-22 21:34 ` [PATCH 13/15] provide _MAT to acpi processor Glauber Costa
2008-02-22 21:34 ` [PATCH 14/15] start a new cpu thread Glauber Costa
2008-02-22 21:34 ` [PATCH 15/15] provide _EJ0 method for processor removal Glauber Costa
2008-02-24 9:33 ` [PATCH 4/15] mark processors as presents Avi Kivity
2008-02-25 14:38 ` Glauber Costa
2008-02-25 14:49 ` Avi Kivity
2008-02-25 14:43 ` Glauber Costa
2008-02-24 9:34 ` [PATCH 3/15] introduce cpu_set to qemu monitor Avi Kivity
2008-02-24 9:44 ` [PATCH 0/15] Review: acpi processor hotplug Avi Kivity
-- strict thread matches above, loose matches on Subject: below --
2008-02-26 19:56 [PATCH 0/15] " Glauber Costa
2008-02-26 19:56 ` [PATCH 1/15] Make a GPE register block be acessible Glauber Costa
2008-02-26 19:56 ` [PATCH 2/15] mark extra cpus as present Glauber Costa
2008-02-26 19:56 ` [PATCH 3/15] introduce cpu_set to qemu monitor Glauber Costa
2008-02-26 19:56 ` [PATCH 4/15] mark processors as presents Glauber Costa
2008-02-26 19:56 ` [PATCH 5/15] provide gpe _L0x methods Glauber Costa
2008-02-26 19:56 ` [PATCH 6/15] provide operation region for pio to the gpes Glauber Costa
2008-02-26 19:56 ` [PATCH 7/15] implement method _L00 for GPE0 Glauber Costa
2008-02-26 19:56 ` [PATCH 8/15] isolate cpu initialization function in hw/pc.c Glauber Costa
2008-02-26 19:56 ` [PATCH 9/15] initialize hot add system Glauber Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1203716079-4872-10-git-send-email-gcosta@redhat.com \
--to=gcosta@redhat.com \
--cc=avi@qumranet.com \
--cc=chrisw@sous-sol.org \
--cc=kvm-devel@lists.sourceforge.net \
--cc=marcelo@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox