From: Avi Kivity <avi@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: kvm@vger.kernel.org, Alexander Graf <agraf@suse.de>
Subject: [PATCH 25/40] KVM: Ignore DEBUGCTL MSRs with no effect
Date: Tue, 23 Sep 2008 16:46:39 +0300 [thread overview]
Message-ID: <1222177614-26669-26-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1222177614-26669-1-git-send-email-avi@redhat.com>
From: Alexander Graf <agraf@suse.de>
Netware writes to DEBUGCTL and reads from the DEBUGCTL and LAST*IP MSRs
without further checks and is really confused to receive a #GP during that.
To make it happy we should just make them stubs, which is exactly what SVM
already does.
Writes to DEBUGCTL that are vendor-specific are resembled to behave as if the
virtual CPU does not know them.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
arch/x86/kvm/x86.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 5620df2..94a2165 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -665,6 +665,18 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
pr_unimpl(vcpu, "%s: MSR_IA32_MCG_CTL 0x%llx, nop\n",
__func__, data);
break;
+ case MSR_IA32_DEBUGCTLMSR:
+ if (!data) {
+ /* We support the non-activated case already */
+ break;
+ } else if (data & ~(DEBUGCTLMSR_LBR | DEBUGCTLMSR_BTF)) {
+ /* Values other than LBR and BTF are vendor-specific,
+ thus reserved and should throw a #GP */
+ return 1;
+ }
+ pr_unimpl(vcpu, "%s: MSR_IA32_DEBUGCTLMSR 0x%llx, nop\n",
+ __func__, data);
+ break;
case MSR_IA32_UCODE_REV:
case MSR_IA32_UCODE_WRITE:
break;
@@ -757,6 +769,11 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
case MSR_IA32_MC0_MISC+16:
case MSR_IA32_UCODE_REV:
case MSR_IA32_EBL_CR_POWERON:
+ case MSR_IA32_DEBUGCTLMSR:
+ case MSR_IA32_LASTBRANCHFROMIP:
+ case MSR_IA32_LASTBRANCHTOIP:
+ case MSR_IA32_LASTINTFROMIP:
+ case MSR_IA32_LASTINTTOIP:
data = 0;
break;
case MSR_MTRRcap:
--
1.6.0.1
next prev parent reply other threads:[~2008-09-23 13:47 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-23 13:46 [PATCH 00/40] KVM Updates for 2.6.28 merge window (part 1 of 3) Avi Kivity
2008-09-23 13:46 ` [PATCH 01/40] KVM: VMX: Rename misnamed msr bits Avi Kivity
2008-09-23 13:46 ` [PATCH 02/40] KVM: x86: accessors for guest registers Avi Kivity
2008-09-23 13:46 ` [PATCH 03/40] KVM: Move KVM TRACE DEFINITIONS to common header Avi Kivity
2008-09-23 13:46 ` [PATCH 04/40] KVM: Introduce kvm_set_irq to inject interrupts in guests Avi Kivity
2008-09-23 13:46 ` [PATCH 05/40] KVM: MMU: Separate the code for unlinking a shadow page from its parents Avi Kivity
2008-09-23 13:46 ` [PATCH 06/40] KVM: MMU: Simplify kvm_mmu_zap_page() Avi Kivity
2008-09-23 13:46 ` [PATCH 07/40] KVM: Move NMI IRET fault processing to new vmx_complete_interrupts() Avi Kivity
2008-09-23 13:46 ` [PATCH 08/40] KVM: VMX: Move nmi injection failure processing to vm exit path Avi Kivity
2008-09-23 13:46 ` [PATCH 09/40] KVM: Clear exception queue before emulating an instruction Avi Kivity
2008-09-23 13:46 ` [PATCH 10/40] KVM: VMX: Fix pending exception processing Avi Kivity
2008-09-23 13:46 ` [PATCH 11/40] KVM: Add a pending interrupt queue Avi Kivity
2008-09-23 13:46 ` [PATCH 12/40] KVM: VMX: Move interrupt post-processing to vmx_complete_interrupts() Avi Kivity
2008-09-23 13:46 ` [PATCH 13/40] KVM: VMX: Remove redundant check in handle_rmode_exception Avi Kivity
2008-09-23 13:46 ` [PATCH 14/40] KVM: Consolidate PIC isr clearing into a function Avi Kivity
2008-09-23 13:46 ` [PATCH 15/40] KVM: Consolidate XX_VECTOR defines Avi Kivity
2008-09-23 13:46 ` [PATCH 16/40] KVM: VMX: Reinject real mode exception Avi Kivity
2008-09-23 13:46 ` [PATCH 17/40] KVM: VMX: Unify register save/restore across 32 and 64 bit hosts Avi Kivity
2008-09-23 13:46 ` [PATCH 18/40] KVM: SVM: " Avi Kivity
2008-09-23 13:46 ` [PATCH 19/40] KVM: kvmtrace: Remove use of bit fields in kvm trace structure Avi Kivity
2008-09-23 13:46 ` [PATCH 20/40] KVM: kvmtrace: replace get_cycles with ktime_get v3 Avi Kivity
2008-09-23 13:46 ` [PATCH 21/40] KVM: ppc: enable KVM_TRACE building for powerpc Avi Kivity
2008-09-23 13:46 ` [PATCH 22/40] KVM: ppc: adds trace points for ppc tlb activity Avi Kivity
2008-09-23 13:46 ` [PATCH 23/40] KVM: ppc: trace powerpc instruction emulation Avi Kivity
2008-09-23 13:46 ` [PATCH 24/40] KVM: VMX: Avoid vmwrite(HOST_RSP) when possible Avi Kivity
2008-09-23 13:46 ` Avi Kivity [this message]
2008-09-23 13:46 ` [PATCH 26/40] KVM: ppc: guest breakpoint support Avi Kivity
2008-09-23 13:46 ` [PATCH 27/40] KVM: ppc: Stop saving host TLB state Avi Kivity
2008-09-23 13:46 ` [PATCH 28/40] KVM: ppc: Write only modified shadow entries into the TLB on exit Avi Kivity
2008-09-23 13:46 ` [PATCH 29/40] KVM: powerpc: Map guest userspace with TID=0 mappings Avi Kivity
2008-09-23 13:46 ` [PATCH 30/40] KVM: Add irq ack notifier list Avi Kivity
2008-09-23 13:46 ` [PATCH 31/40] KVM: irq ack notification Avi Kivity
2008-09-23 13:46 ` [PATCH 32/40] KVM: PIT: fix injection logic and count Avi Kivity
2008-09-23 13:46 ` [PATCH 33/40] x86: paravirt: factor out cpu_khz to common code Avi Kivity
2008-09-23 13:46 ` [PATCH 34/40] x86: KVM guest: use paravirt function to calculate cpu khz Avi Kivity
2008-09-23 13:46 ` [PATCH 35/40] KVM: direct mmio pfn check Avi Kivity
2008-09-23 13:46 ` [PATCH 36/40] KVM: pci device assignment Avi Kivity
2008-09-23 13:46 ` [PATCH 37/40] KVM: Reduce kvm stack usage in kvm_arch_vm_ioctl() Avi Kivity
2008-09-23 13:46 ` [PATCH 38/40] KVM: Reduce stack usage in kvm_vcpu_ioctl() Avi Kivity
2008-09-23 13:46 ` [PATCH 39/40] KVM: Reduce stack usage in kvm_arch_vcpu_ioctl() Avi Kivity
2008-09-23 13:46 ` [PATCH 40/40] KVM: Reduce stack usage in kvm_pv_mmu_op() Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1222177614-26669-26-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=agraf@suse.de \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox