From: Alexander Graf <agraf@suse.de>
To: kvm@vger.kernel.org
Cc: joro@8bytes.org, anthony@codemonkey.ws, avi@qumranet.com,
Alexander Graf <agraf@suse.de>
Subject: [PATCH 03/10] Add helper functions for nested SVM v4
Date: Wed, 15 Oct 2008 21:31:26 +0200 [thread overview]
Message-ID: <1224099093-10985-4-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1224099093-10985-3-git-send-email-agraf@suse.de>
These are helpers for the nested SVM implementation.
- nsvm_printk implements a debug printk variant
- nested_svm_do calls a handler that can accesses gpa-based memory
v3 makes use of the new permission checker
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/x86/kvm/svm.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 88 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 4ee5376..a00421b 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -48,6 +48,16 @@ MODULE_LICENSE("GPL");
#define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
+/* Turn on to get debugging output*/
+/* #define NESTED_DEBUG */
+
+#ifdef NESTED_DEBUG
+#define nsvm_printk(fmt, args...) printk(KERN_INFO fmt, ## args)
+#else
+static inline void nsvm_printk(char *fmt, ...) {
+}
+#endif
+
/* enable NPT for AMD64 and X86 with PAE */
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
static bool npt_enabled = true;
@@ -1145,6 +1155,84 @@ static int vmmcall_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
return 1;
}
+static int nested_svm_check_permissions(struct vcpu_svm *svm)
+{
+ if (svm->vmcb->save.cpl) {
+ printk(KERN_ERR "%s: invalid cpl 0x%x at ip 0x%lx\n",
+ __func__, svm->vmcb->save.cpl, kvm_rip_read(&svm->vcpu));
+ kvm_queue_exception(&svm->vcpu, GP_VECTOR);
+ return 1;
+ }
+
+ if (!(svm->vcpu.arch.shadow_efer & MSR_EFER_SVME_MASK)
+ || !is_paging(&svm->vcpu)) {
+ kvm_queue_exception(&svm->vcpu, UD_VECTOR);
+ return 1;
+ }
+
+ return 0;
+}
+
+static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
+{
+ struct page *page;
+
+ down_read(¤t->mm->mmap_sem);
+ page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
+ up_read(¤t->mm->mmap_sem);
+
+ if (is_error_page(page)) {
+ printk(KERN_ERR "%s: could not find page at 0x%llx\n",
+ __func__, gpa);
+ kvm_release_page_clean(page);
+ kvm_queue_exception(&svm->vcpu, GP_VECTOR);
+ return NULL;
+ }
+ return page;
+}
+
+static int nested_svm_do(struct vcpu_svm *svm,
+ u64 arg1_gpa, u64 arg2_gpa, void *opaque,
+ int (*handler)(struct vcpu_svm *svm,
+ void *arg1,
+ void *arg2,
+ void *opaque))
+{
+ struct page *arg1_page;
+ struct page *arg2_page = NULL;
+ void *arg1;
+ void *arg2 = NULL;
+ int retval;
+
+ arg1_page = nested_svm_get_page(svm, arg1_gpa);
+ if(arg1_page == NULL)
+ return 1;
+
+ if (arg2_gpa) {
+ arg2_page = nested_svm_get_page(svm, arg2_gpa);
+ if(arg2_page == NULL) {
+ kvm_release_page_clean(arg1_page);
+ return 1;
+ }
+ }
+
+ arg1 = kmap_atomic(arg1_page, KM_USER0);
+ if (arg2_gpa)
+ arg2 = kmap_atomic(arg2_page, KM_USER1);
+
+ retval = handler(svm, arg1, arg2, opaque);
+
+ kunmap_atomic(arg1, KM_USER0);
+ if (arg2_gpa)
+ kunmap_atomic(arg2, KM_USER1);
+
+ kvm_release_page_dirty(arg1_page);
+ if (arg2_gpa)
+ kvm_release_page_dirty(arg2_page);
+
+ return retval;
+}
+
static int invalid_op_interception(struct vcpu_svm *svm,
struct kvm_run *kvm_run)
{
--
1.5.6
next prev parent reply other threads:[~2008-10-15 19:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-15 19:31 [PATCH 00/10] Add support for nested SVM (kernel) v4 Alexander Graf
2008-10-15 19:31 ` [PATCH 01/10] Add CPUID feature flag for SVM v4 Alexander Graf
2008-10-15 19:31 ` [PATCH 02/10] Clean up VINTR setting v4 Alexander Graf
2008-10-15 19:31 ` Alexander Graf [this message]
2008-10-15 19:31 ` [PATCH 04/10] Implement GIF, clgi and stgi v4 Alexander Graf
2008-10-15 19:31 ` [PATCH 05/10] Implement hsave v4 Alexander Graf
2008-10-15 19:31 ` [PATCH 06/10] Add VMLOAD and VMSAVE handlers v4 Alexander Graf
2008-10-15 19:31 ` [PATCH 07/10] Add VMRUN handler v4 Alexander Graf
2008-10-15 19:31 ` [PATCH 08/10] Add VMEXIT handler and intercepts v4 Alexander Graf
2008-10-15 19:31 ` [PATCH 09/10] allow read access to MSR_VM_VR Alexander Graf
2008-10-15 19:31 ` [PATCH 10/10] Allow setting the SVME bit v4 Alexander Graf
2008-10-19 9:51 ` [PATCH 07/10] Add VMRUN handler v4 Avi Kivity
2008-10-19 9:58 ` Alexander Graf
2008-10-19 10:06 ` Avi Kivity
2008-10-19 10:13 ` Alexander Graf
2008-10-19 10:27 ` Avi Kivity
2008-10-19 10:33 ` Alexander Graf
2008-10-19 10:54 ` Avi Kivity
2008-10-19 9:46 ` [PATCH 04/10] Implement GIF, clgi and stgi v4 Avi Kivity
2008-10-19 9:57 ` Alexander Graf
2008-10-19 10:04 ` Avi Kivity
2008-10-16 11:25 ` [PATCH 01/10] Add CPUID feature flag for SVM v4 Alexander Graf
2008-10-19 9:56 ` [PATCH 00/10] Add support for nested SVM (kernel) v4 Avi Kivity
2008-10-19 10:01 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1224099093-10985-4-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=anthony@codemonkey.ws \
--cc=avi@qumranet.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox